Add an entry providing the necessary info to make the touchscreen work
on various tablets based on the Insyde 7W whitebox tablet.
This has been tested on a DEXP Ursus 7W tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Now that device_add_properties takes a const property_entry * rather
then a non-const one we can constify the properties arrays.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Make dell-wmi notify on hotkey kbd brightness changes, listen for this
in dell-laptop and call led_classdev_notify_brightness_hw_changed.
This will allow userspace to monitor (poll) for brightness changes on
these LEDs caused by the hotkey.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
The kbd led code has multiple entry points each of which modifies the
kbd_state by reading it, modifying a copy, writing the copy and on
error setting the modified copy writing back the original state.
This is racy, so add a mutex protection the read-modify-write cycle
on each of the entry points.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Return -EINVAL immediately on invalid input, rather then doing
the straight path in an if block and returning -EINVAL at the end
of the function.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
There are several cases where events handled in one of the dell-* drivers
need to be propagated to another dell-* driver.
This commit adds 3 generic functions:
dell_laptop_register_notifier()
dell_laptop_unregister_notifier()
dell_laptop_call_notifier()
It currently only defines 1 action:
DELL_LAPTOP_KBD_BACKLIGHT_BRIGHTNESS_CHANGED
Which is intended to propagate kbd_backlight_brightness_changed wmi
events from dell-wmi to dell-laptop (which contains the actual kbd
backlight driver).
These functions are put in dell-smbios as both dell-wmi and dell-laptop
use smbios functions and I do not want to put the notifier head in
either driver, as that will make the 2 drivers depend on each other.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
When debugging the JIT on an embedded platform or cross build
environment, libbfd may not be available, making it impossible to run
bpf_jit_disasm natively.
Add an option to emit a binary image of the JIT code to a file. This
file can then be disassembled off line. Typical usage in this case
might be (pasting mips64 dmesg output to cat command):
$ cat > jit.raw
$ bpf_jit_disasm -f jit.raw -O jit.bin
$ mips64-linux-gnu-objdump -D -b binary -m mips:isa64r2 -EB jit.bin
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Field FL/TPL in register TDES3 is not correctly set on GMAC4.
TX appears to be functional on GMAC 4.10a even if this field is not set,
however, to avoid relying on undefined behavior, set the length in TDES3.
The field has a different meaning depending on if the TSE bit in TDES3
is set or not (TSO). However, regardless of the TSE bit, the field is
not optional. The field is already set correctly when the TSE bit is set.
Since there is no limit for the number of descriptors that can be
used for a single packet, the field should be set to the sum of
the buffers contained in:
[<desc with First Descriptor bit set> ... <desc n> ...
<desc with Last Descriptor bit set>], which should be equal to skb->len.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Save the filter tid while creating the server filter, which is used
later to retrieve the corresponding filter instance while handling
the filter reply.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Telit LE920A4 uses the same pid 0x1201 of LE920, but modem
implementation is different, since it requires DTR to be set for
answering to qmi messages.
This patch replaces QMI_FIXED_INTF with QMI_QUIRK_SET_DTR: tests on
LE920 have been performed in order to verify backward compatibility.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert commit 57707a9a77 (ACPICA: Resources: Not a valid resource if
buffer length too long) as it is reported to prevent the TPM module
from loading on Lenovo X60 with Coreboot.
It also causes new confusing warnings to show up in the kernel log.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=195311
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Make the Acer Chromebook keyboard work again with the Intel
Cherryview driver.
- Fix a merge error in the Exynos 5433 driver.
-----BEGIN PGP SIGNATURE-----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=Uh95
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Two pin control fixes arriving late, these are hopefully the last pin
control fixes I send this kernel cycle. A Chromebook and an Exynos SoC
thingie.
The Exynos patch is pretty big, it is fixing unbroken a breakage
caused by yours truly when trying to figure out the merge mess with
the different Samsung platforms for this merge window. Sorry about
that. We have countered this situation by assigning a Samsung pin
control submaintainer to catch stuff earlier.
Summary:
- Make the Acer Chromebook keyboard work again with the Intel
Cherryview driver.
- Fix a merge error in the Exynos 5433 driver"
* tag 'pinctrl-v4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: cherryview: Add a quirk to make Acer Chromebook keyboard work again
pinctrl: samsung: Add missing part for PINCFG_TYPE_DRV of Exynos5433
It is required to know the PWM clock source frequency to calculate the
PWM period.
In driver, the clock source frequency of the PWM does not get change
and, hence, get the clock source frequency in driver init. Get this
values later for period calculation from pwm_config().
This will help in avoiding the clock call for getting clock rate in the
pwm_config() each time.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
GPIO-only driver operation never clears the SLEEP bit, which can cause
the GPIOs to become unusable.
Example:
1. user requests first PWM -> driver clears SLEEP bit
2. user frees last PWM -> driver sets SLEEP bit
3. user requests GPIO
4. user switches GPIO on -> output does not turn on
because SLEEP bit is set
Prevent this behaviour by letting the runtime PM framework control the
SLEEP bit. This will put the chip to SLEEP if no PWMs/GPIOs are exported
or in use.
Fixes: bccec89f0a ("Allow any of the 16 PWMs to be used as a GPIO")
Reported-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Signed-off-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
drivers/pwm/pwm-mediatek.c:210:3-8: No need to set .owner here. The core will do it.
Remove .owner field if calls are used which set it automatically
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
CC: John Crispin <john@phrozen.org>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
For very short periods, the result of the division might overflow the
unsigned long hz variable (on 32-bit architectures). Avoid that by
making it an unsigned long long. While at it, also remove an unneeded
local variable whose only purpose is to store a temporary computation.
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
I'm hitting the BUG in nfsd4_max_reply() at fs/nfsd/nfs4proc.c:2495 when
client sends an operation the server doesn't support.
in nfsd4_max_reply() it checks for NULL rsize_bop but a non-supported
operation wouldn't have that set.
Cc: Kinglong Mee <kinglongmee@gmail.com>
Fixes: 2282cd2c05 "NFSD: Get response size before operation..."
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit ef65aaede2 ("smb2: Enforce sec= mount option") changed the
behavior of a mount command to enforce a specified security mechanism
during mounting. On another hand according to the spec if SMB3 server
doesn't respond with a security context it implies that it supports
NTLMSSP. The current code doesn't keep it in mind and fails a mount
for such servers if no security mechanism is specified. Fix this by
indicating that a server supports NTLMSSP if a security context isn't
returned during negotiate phase. This allows the code to use NTLMSSP
by default for SMB3 mounts.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Russell King says:
====================
mvmdio updates
This series of patches update mvmdio for Armada 8k CP110. A number of
issues were found:
1. The driver fails to disable an interrupt when something goes wrong
in the probe function.
2. The interrupt is specified in DT to be optional, but the driver
unconditionally writes to the interrupt mask register, which may
not exist.
3. The DT binding specifies
"reg: address and length of the SMI register"
however, when supporting the interrupt, the size must cover the
interrupt register as well. Update the binding documentation
with this information that was previously omitted.
4. If the register size is too small, have the driver print an error
and disable use of the interrupt.
5. Armada 8k needs three clocks for the MDIO interface, otherwise the
SoC hangs (since it is part of one of the ethernet interfaces.)
GOP clock, MG core clock and MG clock are needed on 8k. Augment the
binding and driver to allow three clocks to be specified.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow up to three clocks to be specified and enabled for the orion-mdio
interface, which are required for this interface to be accessible on
Armada 8k platforms.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Armada 8040 needs three clocks to be enabled for MDIO accesses to work.
Update the binding to allow the extra clocks to be specified.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Disable the MDIO interrupt, falling back to polled mode, if the resource
size does not allow us to access the interrupt registers. All current
DT bindings use a size of 0x84, which allows access, but verifying it is
good practice.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct the Marvell Orion MDIO binding document to properly reflect the
cases where an interrupt is present. Augment the examples to show this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pre-existing write to disable interrupts on the remove path happens
whether we have an interrupt or not. While this may seem to be a good
idea, this driver is re-used in many different implementations, some
where the binding only specifies four bytes of register space. This
access causes us to access registers outside of the binding.
Make it conditional on the interrupt being present, which is the same
condition used when enabling the interrupt in the first place.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the mvmdio driver has an interrupt, it enables the "done" interrupt
after requesting its interrupt handler. However, probe failure results
in the interrupt being left enabled. Disable it on the failure path.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In https://lkml.org/lkml/2017/2/2/16 I reported a build error that I
believed was caused by wrong uapi includes. The synthom was fixed by
Arnaldo in:
commit 2f7db55579 ("perf tools: Fix include of linux/mman.h")
but I was wrong attributing the problem to the uapi include.
The root cause was that I was using ARCH=x86_64, hence using the wrong
uapi include path. This explains why no one else ran into this build
problem.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170412064919.92449-8-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Besides memory allocation failure, tips.txt may fail to load because the
file is not found (a more likely cause).
Communicate that to the user in tips failure warning.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170412064919.92449-5-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This change is a follow up of https://lkml.org/lkml/2017/2/2/16
The patch above avoided redefining CC, CXX and PKG_CONFIG in feature
detection. The patch was not merged due to a unsolved concern with the
-MD flag.
Later, commit c8c188679c ("tools build: Use the same CC for feature
detection and actual build") did the change for CC and CXX but not
PKG_CONFIG.
This patch makes PKG_CONFIG consistent with CC and CXX and moves the -MD
to CFLAGS, as suggested by Jiri in the thread above.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170412064919.92449-3-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The build of JVMTI depends on LIBELF (-lelf). Make Makefile.conf
check this dependendancy and notify user when not present.
v2: Comma nitpicking.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Tested-by: Kim Phillips <kim.phillips@arm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170412170745.26620-1-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Consequently refer to external PA instead of inverting the logic and
use an internal PA capability flag which is a bit confusing.
Currently this is used for Rt3352 only, but MT7620A also allows for an
external PA which will be supported by a follow up patch.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
When driver is going to sleep, it does not leave LPS/IPS, thus the
BTCoex may have mismatch when driver wakes up. To avoid that, BTCoex
needs to clear the IPS/LPS state when it receives a pnp notify, then
it can properly set up the hw when driver wakes up.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
When wifi is on a 5G channel, the 5G signal will not interfere bt 2.4G
signal, and they can transmit simultaneously, hence there is no need to
switch antenna between wifi and bt.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
When wifi is scanning and not connected, set the tdma and coex table
properly to control the priority of the packets to make the wifi bt
coexistence operate smoothly
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
With bt inquiry, the wifi may start as a softap or the wifi and bt are
busy, we take these scenarios into consider to avoid bt inquiry to
degrade the performance of the network
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Move the bt disable flag to a global structure to indicate that bt is
turned off.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
If the device has wifi mode only, there is no need to initiate the
hardware for wifi and bt coexistence, so just return to avoid it.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
When wifi is associating or authenticating, set the coex table for wifi
to establish link. These packets should have higher priority.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
To support miracast and P2P, the chip may operate under concurrent mode,
In this situation, do not aggregate tx packet and properly set the rx
aggregation size.
We detect it by monitoring the number of link established.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Set antenna control path if PTA is in control of the packet path of wifi
and bt. If wifi is turned off, tell the PTA about it.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The antenna position setting is useless for 1 antenna chip.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
For newer fw, the coex table setting needs to be modified to operate
correctly.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This function checks if wifi has changed its statusi. It will be needed
in the future.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
For ap mode, adjust fw settings to operate properly.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Clear the hid_exist flag by monitoring the packet counter.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
These bt information are displayed in display coex
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Let bt control the aggregation size to improve stability.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
If we don't limit the rx aggregation size, and set tdma instead, the bt profile can
get more stable.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>