Commit graph

678,699 commits

Author SHA1 Message Date
Gary R Hook
51de7dd02d crypto: ccp - Remove redundant cpu-to-le32 macros
Endianness is dealt with when the command descriptor is
copied into the command queue. Remove any occurrences of
cpu_to_le32() found elsewhere.

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-05 21:58:34 +08:00
Fabien DESSENNE
8fbbcbdd1d ARM: configs: stm32: Add crypto support
Add STM32 crypto support in stm32_defconfig file.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-05 21:58:34 +08:00
Fabien DESSENNE
2e3db29318 ARM: dts: stm32: enable CRC on stm32746g-eval board
Enable the CRC (CRC32 crypto) on stm32746g-eval board

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-05 21:58:34 +08:00
Fabien DESSENNE
115d691fc3 ARM: dts: stm32: Add CRC support to stm32f746
Add CRC (CRC32 crypto) support to stm32f746.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-05 21:58:34 +08:00
Fabien DESSENNE
b51dbe9091 crypto: stm32 - Support for STM32 CRC32 crypto module
This module registers a CRC32 ("Ethernet") and a CRC32C (Castagnoli)
algorithm that make use of the STMicroelectronics STM32 crypto hardware.

Theses algorithms are compatible with the little-endian generic ones.
Both algorithms use ~0 as default seed (key).
With CRC32C the output is xored with ~0.

Using TCRYPT CRC32C speed test, this shows up to 900% speedup compared
to the crc32c-generic algorithm.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-05 21:58:33 +08:00
Fabien DESSENNE
c0a680c4cc dt-bindings: Document STM32 CRC bindings
Document device tree bindings for the STM32 CRC (crypto CRC32)

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-05 21:58:33 +08:00
Herbert Xu
c6dc060906 Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Merge the crypto tree to resolve conflict between caam changes.
2017-04-05 21:57:07 +08:00
Dan Carpenter
c800460086 qed: Add a missing error code
We should be returning -ENOMEM if qed_mcp_cmd_add_elem() fails.  The
current code returns success.

Fixes: 4ed1eea82a ("qed: Revise MFW command locking")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:53:42 -07:00
Dan Carpenter
2c099ccbd0 net: sched: choke: remove some dead code
We accidentally left this dead code behind after commit 5952fde10c
("net: sched: choke: remove dead filter classify code").

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:53:42 -07:00
Dan Carpenter
781159fb9c liquidio: clear the correct memory
There is a cut and paste bug here so we accidentally clear the first
few bytes of "resp" a second time instead clearing "ctx".

Fixes: 50c0add534 ("liquidio: refactor interrupt moderation code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:53:42 -07:00
James Hogan
fb8ea062a8 metag/usercopy: Add early abort to copy_to_user
When copying to userland on Meta, if any faults are encountered
immediately abort the copy instead of continuing on and repeatedly
faulting, and worse potentially copying further bytes successfully to
subsequent valid pages.

Fixes: 373cd784d0 ("metag: Memory handling")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Cc: stable@vger.kernel.org
2017-04-05 14:49:42 +01:00
James Hogan
2257211942 metag/usercopy: Fix alignment error checking
Fix the error checking of the alignment adjustment code in
raw_copy_from_user(), which mistakenly considers it safe to skip the
error check when aligning the source buffer on a 2 or 4 byte boundary.

If the destination buffer was unaligned it may have started to copy
using byte or word accesses, which could well be at the start of a new
(valid) source page. This would result in it appearing to have copied 1
or 2 bytes at the end of the first (invalid) page rather than none at
all.

Fixes: 373cd784d0 ("metag: Memory handling")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Cc: stable@vger.kernel.org
2017-04-05 14:49:36 +01:00
James Hogan
ef62a2d81f metag/usercopy: Drop unused macros
Metag's lib/usercopy.c has a bunch of copy_from_user macros for larger
copies between 5 and 16 bytes which are completely unused. Before fixing
zeroing lets drop these macros so there is less to fix.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-metag@vger.kernel.org
Cc: stable@vger.kernel.org
2017-04-05 14:49:26 +01:00
Joao Pinto
03cf65a959 net: stmmac: rx queue to dma channel mapping fix
In hardware configurations where multiple queues are active,
the rx queue needs to be mapped into a dma channel, even if
a single rx queue is used.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:47:26 -07:00
Tobias Klauser
ab044f8e3e batman-adv: Use net_device_stats from struct net_device
Instead of using a private copy of struct net_device_stats in struct
batadv_priv, use stats from struct net_device.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2017-04-05 15:41:24 +02:00
Wei Yongjun
62277de758 ring-buffer: Fix return value check in test_ringbuffer()
In case of error, the function kthread_run() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().

Link: http://lkml.kernel.org/r/1466184839-14927-1-git-send-email-weiyj_lk@163.com

Cc: stable@vger.kernel.org
Fixes: 6c43e554a ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-05 09:36:52 -04:00
Joe Perches
1f37b177fd phy/ethtool: Add missing SPEED_<foo> strings
Add all the currently available SPEED_<foo> strings.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:36:06 -07:00
David S. Miller
5422e5a390 Merge branch 'bnxt_en-WoL-selftest-XDP_TX-optimize'
Michael Chan says:

====================
bnxt_en: Updates for net-next.

Main changes are to add WoL and selftest features, optimize XDP_TX by
using short BDs, and to cap the usage of MSIX.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:24:28 -07:00
Michael Chan
68a946bb81 bnxt_en: Cap the msix vector with the max completion rings.
The current code enables up to the maximum MSIX vectors in the PCIE
config space without considering the max completion rings available.
An MSIX vector is only useful when it has an associated completion
ring, so it is better to cap it.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:24:26 -07:00
Michael Chan
932dbf83ba bnxt_en: Use short TX BDs for the XDP TX ring.
No offload is performed on the XDP_TX ring so we can use the short TX
BDs.  This has the effect of doubling the size of the XDP TX ring so
that it now matches the size of the rx ring by default.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:24:26 -07:00
Michael Chan
67fea463fd bnxt_en: Add interrupt test to ethtool -t selftest.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:24:26 -07:00
Michael Chan
91725d89b9 bnxt_en: Add PHY loopback to ethtool self-test.
It is necessary to disable autoneg before enabling PHY loopback,
otherwise link won't come up.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:24:26 -07:00
Michael Chan
f7dc1ea6c4 bnxt_en: Add ethtool mac loopback self test.
The mac loopback self test operates in polling mode.  To support that,
we need to add functions to open and close the NIC half way.  The half
open mode allows the rings to operate without IRQ and NAPI.  We
use the XDP transmit function to send the loopback packet.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:24:26 -07:00
Michael Chan
eb51365846 bnxt_en: Add basic ethtool -t selftest support.
Add the basic infrastructure and only firmware tests initially.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:24:26 -07:00
Michael Chan
f65a2044a8 bnxt_en: Add suspend/resume callbacks.
Add suspend/resume callbacks using the newer dev_pm_ops method.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:24:26 -07:00
Michael Chan
5282db6c79 bnxt_en: Add ethtool set_wol method.
And add functions to set and free magic packet filter.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:24:26 -07:00
Michael Chan
8e202366dd bnxt_en: Add ethtool get_wol method.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:24:26 -07:00
Michael Chan
d196ece740 bnxt_en: Add pci shutdown method.
Add pci shutdown method to put device in the proper WoL and power state.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:24:26 -07:00
Michael Chan
c1ef146a5b bnxt_en: Add basic WoL infrastructure.
Add code to driver probe function to check if the device is WoL capable
and if Magic packet WoL filter is currently set.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:24:26 -07:00
Michael Chan
8eb992e876 bnxt_en: Update firmware interface spec to 1.7.6.2.
Features added include WoL and selftest.

Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05 06:24:26 -07:00
Horia Geantă
40c98cb57c crypto: caam - fix RNG deinstantiation error checking
RNG instantiation was previously fixed by
commit 62743a4145 ("crypto: caam - fix RNG init descriptor ret. code checking")
while deinstantiation was not addressed.

Since the descriptors used are similar, in the sense that they both end
with a JUMP HALT command, checking for errors should be similar too,
i.e. status code 7000_0000h should be considered successful.

Cc: <stable@vger.kernel.org> # 3.13+
Fixes: 1005bccd7a ("crypto: caam - enable instantiation of all RNG4 state handles")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-05 21:20:17 +08:00
Horia Geantă
33fa46d7b3 crypto: caam - fix invalid dereference in caam_rsa_init_tfm()
In case caam_jr_alloc() fails, ctx->dev carries the error code,
thus accessing it with dev_err() is incorrect.

Cc: <stable@vger.kernel.org> # 4.8+
Fixes: 8c419778ab ("crypto: caam - add support for RSA algorithm")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-05 21:20:16 +08:00
Horia Geantă
ec360607a2 crypto: caam - fix JR platform device subsequent (re)creations
The way Job Ring platform devices are created and released does not
allow for multiple create-release cycles.

JR0 Platform device creation error
JR0 Platform device creation error
caam 2100000.caam: no queues configured, terminating
caam: probe of 2100000.caam failed with error -12

The reason is that platform devices are created for each job ring:

        for_each_available_child_of_node(nprop, np)
                if (of_device_is_compatible(np, "fsl,sec-v4.0-job-ring") ||
                    of_device_is_compatible(np, "fsl,sec4.0-job-ring")) {
                        ctrlpriv->jrpdev[ring] =
                                of_platform_device_create(np, NULL, dev);

which sets OF_POPULATED on the device node, but then it cleans these up:

        /* Remove platform devices for JobRs */
        for (ring = 0; ring < ctrlpriv->total_jobrs; ring++) {
                if (ctrlpriv->jrpdev[ring])
                        of_device_unregister(ctrlpriv->jrpdev[ring]);
        }

which leaves OF_POPULATED set.

Use of_platform_populate / of_platform_depopulate instead.
This allows for a bit of driver clean-up, jrpdev is no longer needed.

Logic changes a bit too:
-exit in case of_platform_populate fails, since currently even QI backend
depends on JR; true, we no longer support the case when "some" of the JR
DT nodes are incorrect
-when cleaning up, caam_remove() would also depopulate RTIC in case
it would have been populated somewhere else - not the case for now

Cc: <stable@vger.kernel.org>
Fixes: 313ea293e9 ("crypto: caam - Add Platform driver for Job Ring")
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Suggested-by: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-05 21:20:15 +08:00
Karthik Ananthapadmanabha
1aed89640a mwifiex: apply radar flag
When IEEE80211_CHAN_RADAR is set by cfg80211, passive scan must be
performed. In mwifiex,active scan is performed even though flag is
set from cfg80211. mwifiex_reg_apply_radar_flags() function added
in this patch correctly uses radar flag.

Signed-off-by: Karthik Ananthapadmanabha <karthida@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:54:52 +03:00
Yan-Hsuan Chuang
495d36e668 rtlwifi: btcoex: 23b 2ant: new fw use h2c to control GNT_BT
Earlier versions of the FW did not support h2c to set GNT_BT, but later
versions have that capability. Hence we check the FW version and decide
whether to use h2c or just write to the register.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:53:30 +03:00
Yan-Hsuan Chuang
a66a4176b7 rtlwifi: btcoex: 23b 2ant: add comments to describe how duration adjusted
Since btcoex uses static variables to store the cumulative information
on the wifi status, some tricks are used that are a bit obscure. We add
some comments about the criteria we use to adjust wifi duration.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:53:30 +03:00
Yan-Hsuan Chuang
44e9a5340e rtlwifi: btcoex: 23b 2ant: finer bt power adjustment
The bt can specify a power level to decrease. Rather than decreasing by a
fixed value (usually 2), this change makes the driver fit to the
environment more quickly.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:53:29 +03:00
Yan-Hsuan Chuang
7ff9809322 rtlwifi: btcoex: 23b 2ant: remove redundant bt stack report
New ICs have hardware mailbox to deliver bt information instead of doing
it by driver itself, so remove them.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:53:29 +03:00
Yan-Hsuan Chuang
f36714fbfa rtlwifi: btcoex: 23b 2ant: coex table fine tune
set coex table fine tune, for register settings

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:53:28 +03:00
Yan-Hsuan Chuang
3f957062c9 rtlwifi: btcoex: 23b 2ant: adjust wifi duration for bt a2dp
The larger the bt a2dp bit pool is, the more time bt needs to receive
them. If we do not adjust the wifi duration, the voice quality will be
low. Hence we reduce the time that wifi holds, to improve the a2dp
service.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:53:28 +03:00
Yan-Hsuan Chuang
e4782bc6ce rtlwifi: btcoex: 23b 2ant: less sensitive to tx rate penalty
modify h2c parameter so that the rate suffers less penalty from retry

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:53:27 +03:00
Yan-Hsuan Chuang
55e9e37da2 rtlwifi: btcoex: 23b 2ant: monitor wifi counter for allocate tdma time
If there are too many CRC error packets, it means the wifi is operating
under low quality circumstances. If so, we need to reallocate the
resources of wifi and bt

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:53:27 +03:00
Yan-Hsuan Chuang
61d802619b rtlwifi: btcoex: 23b 2ant: detect if bt is slave, and modify tdma
if the bt is slave, it may receive packet at any time, so we
need to mark them as high priority packets to avoid packet loss.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:53:27 +03:00
Yan-Hsuan Chuang
155305f5b0 rtlwifi: btcoex: 23b 2ant: add btc8723b2ant_limited_rx to reduce agg size
For wifi and bt coexistence, if the aggregation size of wifi is too
large, the transmission time of the aggregated packet could be too long
and the bt packets might "cut off" the wifi packet. We need to reduce
the aggregation size to improve wifi performance.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:53:26 +03:00
Yan-Hsuan Chuang
c6821613e6 rtlwifi: btcoex: follow linux coding style
Fix a number of checkpatch.pl warnings. In addition, some variable and
function names are shortened, and/or renamed to be more consistent.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:53:25 +03:00
Yan-Hsuan Chuang
27a31a60a4 rtlwifi: btcoex: remove unused functions
A number of functions in the Bluetooth Coexistence routines are not used,
and can be removed.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Pkshih <pkshih@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:53:25 +03:00
Karthik Ananthapadmanabha
38c51d03ce mwifiex: add missing IEs related to TDLS operation
In mwifiex,IEs such as supported channels, supported operating classes
20/40 BSS COexistence are missing and also extra QOS capabilities IE
is added during TDLS discovery response, TDLS setup request and
TDLS setupresponse.
This patch adds require IEs and also removes extra IE.

Signed-off-by: Karthik Ananthapadmanabha <karthida@marvell.com>
Signed-off-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:51:57 +03:00
Jan Glauber
621c4fe3cc EDAC, thunderx: Fix L2C MCI interrupt disable
Fix a typo that disabled the MCI interrupts using the wrong bitmask.

Signed-off-by: Jan Glauber <jglauber@cavium.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Sergey Temerkhanov <s.temerkhanov@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/20170405102739.6301-1-jglauber@cavium.com
Signed-off-by: Borislav Petkov <bp@suse.de>
2017-04-05 14:46:05 +02:00
Colin Ian King
5ea8078961 wlcore: fix spelling mistakes in wl1271_warning
trivial fix to spelling mistakes in wl1271_warning error message, change
iligal to invalid and opperation to operation.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:45:29 +03:00
Brian Norris
755b37c93a mwifiex: catch mwifiex_fw_dpc() errors properly in reset
When resetting the device, we take a synchronous firmware-loading code
path, which borrows a lot from the asynchronous path used at probe time.
We don't catch errors correctly though, which means that in the PCIe
driver, we may try to dereference the 'adapter' struct after
mwifiex_fw_dpc() has freed it. See this (erronous) print in
mwifiex_pcie_reset_notify():

	mwifiex_dbg(adapter, INFO, "%s, successful\n", __func__);

Let's instead refactor the synchronous (or "!req_fw_nowait") path so
that we propagate errors and handle them properly.

This fixes a use-after-free issue in the PCIe driver, as well as a
misleading debug message ("successful"). It looks like the SDIO driver
doesn't have these problems, since it doesn't do anything after
mwifiex_reinit_sw().

Fixes: 4c5dae59d2 ("mwifiex: add PCIe function level reset support")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05 15:44:04 +03:00