Commit graph

678,699 commits

Author SHA1 Message Date
Andy Shevchenko
e2c518c6c9 NFC: pn544: Convert to use GPIO descriptor
Since we got rid of platform data, the driver may use
GPIO descriptor directly.

This change fixes a potential issue of double freeing GPIOs in ACPI
case by converting to devm_gpiod_get().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05 10:04:12 +02:00
Andy Shevchenko
e7f6ccaab1 NFC: pn544: Get rid of platform data
Legacy platform data must go away. We are on the safe side here since
there are no users of it in the kernel.

If anyone by any odd reason needs it the GPIO lookup tables and
built-in device properties at your service.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2017-04-05 10:01:19 +02:00
Dhinakaran Pandiyan
b64b7a605d drm/i915: Typo fix - 'pipe bpc' to 'pipe bpp'
Noticed this while I was looking at some debug output,
 [drm:intel_hdmi_compute_config [i915]] picking bpc to 12 for HDMI output
 [drm:intel_hdmi_compute_config [i915]] forcing pipe bpc to 36 for HDMI

I believe the second line should be pipe *bpp*

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1491329765-14340-1-git-send-email-dhinakaran.pandiyan@intel.com
2017-04-05 10:54:50 +03:00
Marcin Rokicki
37ff1b0df3 ath10k: clean header files from bad block comments
Fix output from checkpatch.pl like:

 Block comments use a trailing */ on a separate line

Signed-off-by: Marcin Rokicki <marcin.rokicki@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-05 10:45:21 +03:00
Marcin Rokicki
53c8d48bb7 ath10k: use octal permission representation
Fix output from checkpatch.pl like:
 Symbolic permissions 'S_IRUSR' are not preferred.
 Consider using octal permissions '0400'.

Signed-off-by: Marcin Rokicki <marcin.rokicki@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-05 10:43:44 +03:00
Sergei Shtylyov
5f4c8cafe1 pinctrl: sh-pfc: r8a7794: Swap ATA signals
All R8A7794 manuals I have here (0.50 and 1.10) agree that the PFC driver
has ATAG0# and ATAWR0# signals in IPSR12 swapped -- fix this.

Fixes: 43c4436e2f ("pinctrl: sh-pfc: add R8A7794 PFC support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-04-05 09:41:29 +02:00
Marcin Rokicki
d6dfe25c8b ath10k: fix block comments style
Fix output from checkpatch.pl like:
 Block comments use a trailing */ on a separate lin

Signed-off-by: Marcin Rokicki <marcin.rokicki@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-05 10:41:03 +03:00
Jan Kara
f410ff6554 audit: Abstract hash key handling
Audit tree currently uses inode pointer as a key into the hash table.
Getting that from notification mark will be somewhat more difficult with
coming fsnotify changes. So abstract getting of hash key from the audit
chunk and inode so that we can change the method to obtain a key easily.

Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
CC: Paul Moore <paul@paul-moore.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2017-04-05 09:39:37 +02:00
Maharaja Kennadyrajan
e871fb6396 ath10k: fix the Transmit Power Control stats display format
This patch helps to fix TPC stats to display the stats
properly. Here cosmetic change has been done to print the
TPC stats for all the cases 1.CDD 2.STBC 3.TXBF

Signed-off-by: Maharaja Kennadyrajan <c_mkenna@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-05 10:39:15 +03:00
Mohammed Shafi Shajakhan
fb7fa766a8 ath10k: remove obselete Copy Engine comments
Remove obselete Copy Engine comments referring to the function
ath10k_ce_sendlist_send as this function was removed long time back
by the commit 2e761b5a52 ("ath10k: remove ce_sendlist_send").

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-05 10:38:41 +03:00
Mohammed Shafi Shajakhan
03e463a419 ath10k: enable a HTC debug message during insufficient tx credits
Add an ath10k HTC debug message when insufficient tx credits
are available to send the WMI commands. This is very useful
in debugging issues like 'tx credit starvation' that could
possibly happen with multiclient setup with constant roaming

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-05 10:37:41 +03:00
Mohammed Shafi Shajakhan
d94475c2f9 ath10k: cancel coverage class work during stop and restart
It seems set_coverage_class_work is not cancelled anywhere,
though I could not find a crash/warning  with this existing
design, its safer to cancel it during stop() and also before
restarting the hardware.

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-05 10:36:49 +03:00
Venkateswara Rao Naralasetty
fefcd11535 ath10k: fix station nss computation
If station advertises diffferent NSS capabilities in Rx_mcs set
of HT and VHT IEs in assoc req, the current NSS computation
logic configures the NSS support only based on Rx_mcs set of
HT capabilities in the driver. This is configuring the station
NSS capabilities incorreclty in the target.

For example, if station advertise Rx_mcs set as 2 spatial streams
in HT capabilities and 1 spatial streams in VHT capabilities in
assoc request, as per current logic we are calculating nss from
HT capabilities and the driver sets peer_num_spatial_streams as
2 for the station which is configured in VHT 1*1.

This patchs fix this issue by calculating the nss from VHT cap if
station supports vht.

Signed-off-by: Venkateswara Rao Naralasetty <c_vnaral@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-05 10:35:51 +03:00
Johan Hovold
ebeb36670e ath9k_htc: fix NULL-deref at probe
Make sure to check the number of endpoints to avoid dereferencing a
NULL-pointer or accessing memory beyond the endpoint array should a
malicious device lack the expected endpoints.

Fixes: 36bcce4306 ("ath9k_htc: Handle storage devices")
Cc: stable <stable@vger.kernel.org>     # 2.6.39+
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-05 10:34:55 +03:00
Mohammed Shafi Shajakhan
a7595a820b ath10k: fix NAPI enable/disable symmetry for AHB interface
Move NAPI enable to 'ath10k_ahb_hif_start' from
'ath10k_ahb_hif_power_up'. This is to maintain the symmetry
of calling napi_enable() from ath10k_ahb_hif_start() so that it
matches with  napi_disable() being called from ath10k_pci_hif_stop().

This change is based on the crash fix from Kalle for PCI interface in
commit 1427228d58 ("ath10k: fix napi crash during rmmod when probe
firmware fails").

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2017-04-05 10:33:26 +03:00
Daniel Vetter
04ee39ba9f drm: Only take crtc lock in get_gamma ioctl
We don't call into drivers at all here, this is enough. Also, we can
reduce the critical section a bit to simplify the code.
crtc->gamma_size is set up once at driver load and then invariant, so
also doesn't need any protection.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-8-daniel.vetter@ffwll.ch
2017-04-05 09:27:39 +02:00
Daniel Vetter
eb8eb02ed8 drm: Drop modeset_lock_all from the getproperty ioctl
Properties, i.e. the struct drm_property specifying the type and value
range of a property, not the instantiation on a given object, are
invariant over the lifetime of a driver.

Hence no locking at all is needed, we can just remove it.

While at it give the function some love and simplify it, to get it
under the 80 char limit:
- Straighten the loops to reduce the nesting.
- use u64_to_user_ptr casting helper
- use put_user for fixed u64 copies.

Note there's a small behavioural change in that we now copy parts of
the values to userspace if the arrays are a bit too small. Since
userspace will immediately retry anyway, this doesn't matter.

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-7-daniel.vetter@ffwll.ch
2017-04-05 09:27:16 +02:00
Daniel Vetter
c2d855649e drm: drop modeset_lock_all from drm_state_info
If we push the locks down we don't have to take them all at the same
time.

Aside: Making dump_info fully safe should be fairly simple, if we
protect the ->state pointers with rcu. Simply putting a
synchronize_rcu() into the drm_atomic_state free function should be
all that's roughly needed. Well except we shouldn't block in there, so
better to put that into a work_struct. But I've not set out to fix
that little issue.

Cc: Rob Clark <robdclark@gmail.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-6-daniel.vetter@ffwll.ch
2017-04-05 09:27:07 +02:00
Daniel Vetter
a5b8444e28 drm/atomic-helper: remove modeset_lock_all from helper_resume
Atomic code rely shouldn't rely on the magic hidden acquire context.

v2: Remove unused config local var (gcc).

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-5-daniel.vetter@ffwll.ch
2017-04-05 09:26:54 +02:00
Daniel Vetter
b260ac3ebe drm: Remove drm_modeset_legacy_acquire_ctx and crtc->acquire_ctx
With all the callers of drm_modeset_lock_crtc gone, and all the places
it was formerly used properly wiring the acquire ctx through, we can
remove this.

The only hidden context magic we still have is now the global one.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-4-daniel.vetter@ffwll.ch
2017-04-05 09:26:45 +02:00
Daniel Vetter
b95ff0319a drm: Remove drm_modeset_(un)lock_crtc
The last user, the cursor ioctl, can just open-code this too. We
simply have to move the acquire ctx dance from the universal function
up into the top-level ioctl handler.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-3-daniel.vetter@ffwll.ch
2017-04-05 09:26:07 +02:00
Daniel Vetter
5f27502655 drm: Make drm_modeset_lock_crtc internal
This is only for legacy paths that need to grab the crtc/plane lock
combo. If you want to lock a crtc, just use drm_modeset_lock().

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403083304.9083-2-daniel.vetter@ffwll.ch
2017-04-05 09:25:37 +02:00
Cohen, Eugene
540f4c0e89 efi/libstub: Skip GOP with PIXEL_BLT_ONLY format
The UEFI Specification permits Graphics Output Protocol (GOP) instances
without direct framebuffer access. This is indicated in the Mode structure
with a PixelFormat enumeration value of PIXEL_BLT_ONLY. Given that the
kernel does not know how to drive a Blt() only framebuffer (which is only
permitted before ExitBootServices() anyway), we should disregard such
framebuffers when looking for a GOP instance that is suitable for use as
the boot console.

So modify the EFI GOP initialization to not use a PIXEL_BLT_ONLY instance,
preventing attempts later in boot to use an invalid screen_info.lfb_base
address.

Signed-off-by: Eugene Cohen <eugene@hp.com>
[ Moved the Blt() only check into the loop and clarified that Blt() only GOPs are unusable by the kernel. ]
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: <stable@vger.kernel.org> # v4.7+
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: leif.lindholm@linaro.org
Cc: linux-efi@vger.kernel.org
Cc: lorenzo.pieralisi@arm.com
Fixes: 9822504c1f ("efifb: Enable the efi-framebuffer platform driver ...")
Link: http://lkml.kernel.org/r/20170404152744.26687-2-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-05 09:20:18 +02:00
Kalle Valo
09e40034f3 Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
ath.git patches for 4.12. Major changes:

ath10k

* improve firmware download time for QCA6174 and QCA9377, especially
  helps resume time

ath9k_htc

* add support AirTies 1eda:2315 AR9271 device
2017-04-05 10:14:09 +03:00
Chen-Yu Tsai
68f37d8624 clk: sunxi-ng: a33: Add offset and minimum value for DDR1 PLL N factor
The DDR1 PLL on the A33 is an oddball amongst the A33 CCU clocks.
It is a clock multiplier, with the effective multiplier in the
range of 12 ~ 255 and no offset between the multiplier value and
the value programmed into the register.

Implement the zero offset and minimum value of 12 for this clock.

Fixes: d05c748bd7 ("clk: sunxi-ng: Add A33 CCU support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 09:03:02 +02:00
Chen-Yu Tsai
25eb035c3f clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks
The CPU cluster PLLs on the A80 are NP clocks that are atypical in two ways:

  - The P factor is 1 bit wide, and translates to a /1 or /4 divider.

  - The P factor should only be used for output frequencies lower than
    288 MHz. The N factor has a lower limit of 12, which likely contributed
    to this extra divider.

According to the user manual, the clocks can only go as low as 200 MHz.
The vendor BSP kernel does not even define operating points below 360
MHz for these clocks. The lower end for cpufreq in the vendor kernel is
even higher. The mainline Linux kernel doesn't support cpufreq for the
A80 at the moment. This means the lower frequencies are untested, and
will likely remain unused.

The new sunxi-ng style clocks don't support the quirks listed above.
Instead of trying to work the quirks in for something of little usage,
we re-model the clocks into N-type multipler clocks, with P fixed at 1.
At probe time we check if P is set to 4, and fix it up if needed. This
is highly unlikely though.

Fixes: b8eb71dcdd ("clk: sunxi-ng: Add A80 CCU")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 09:02:56 +02:00
Chen-Yu Tsai
cf719012b2 clk: sunxi-ng: mult: Support PLL lock detection
Some PLL clocks are N (multiplier) type clocks, or can be simplified
as such. An example of the former is the DDR1 PLL clock on the A33.
An example of the latter is the CPU PLL clock on the A80, in which
the P divider is only used for low frequencies that are of little
use. Both clocks support PLL lock detection.

The mult clock macro implies support for this, but that is not true.
The field is simply discarded. This patch adds proper support for it.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 09:01:41 +02:00
Patrick Menschel
cb44b46d8e ARM: dts: sun7i: fix device node ordering
This patch changes the device node position of ps20 and ps21 to fix
ordering by rising physical address.

From

uart7: serial@01c29c00
i2c0: i2c@01c2ac00
i2c1: i2c@01c2b000
i2c2: i2c@01c2b400
i2c3: i2c@01c2b800
i2c4: i2c@01c2c000
gmac: ethernet@01c50000
hstimer@01c60000
gic: interrupt-controller@01c81000
ps20: ps2@01c2a000
ps21: ps2@01c2a400

to

uart7: serial@01c29c00
ps20: ps2@01c2a000
ps21: ps2@01c2a400
i2c0: i2c@01c2ac00
i2c1: i2c@01c2b000
i2c2: i2c@01c2b400
i2c3: i2c@01c2b800
i2c4: i2c@01c2c000
gmac: ethernet@01c50000
hstimer@01c60000
gic: interrupt-controller@01c81000

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 08:20:52 +02:00
Patrick Menschel
a2294bd618 ARM: dts: sun4i: fix device node ordering
This patch changes the device node position of ps20 and ps21 to fix
ordering by rising physical address.

From

uart7: serial@01c29c00
i2c0: i2c@01c2ac00
i2c1: i2c@01c2b000
i2c2: i2c@01c2b400
ps20: ps2@01c2a000
ps21: ps2@01c2a400

to

uart7: serial@01c29c00
ps20: ps2@01c2a000
ps21: ps2@01c2a400
i2c0: i2c@01c2ac00
i2c1: i2c@01c2b000
i2c2: i2c@01c2b400

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-05 08:20:30 +02:00
Ingo Molnar
11e445e9b4 perf/core improvements and fixes:
User visible:
 
 - Add missing number of samples in 'perf annotate --stdio -l --show-total-period'
   (Taeung Song)
 
 Vendor events updates:
 
 - Add uncore_arb Intel vendor events in JSON format (Andi Kleen)
 
 - Add uncore vendor events for Intel's Sandy Bridge, Ivy Bridge,
   Haswell, Broadwell and Skylake architectures (Andi Kleen)
 
 - Add missing UNC_M_DCLOCKTICKS Intel Broadwell DE uncore vendor event (Andi Kleen)
 
 Infrastructure:
 
 - Remove some more die() calls, avoiding sudden death in library code
   (Arnaldo Carvalho de Melo)
 
 - Add argument support for SDT events in powerpc (Ravi Bangoria)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJY5Da/AAoJENZQFvNTUqpApG0P/jt4ZhAvCWGek/9aspP9mecc
 afb84XMvdxiZ/54fFNbch9AbX2I9F6q0HUpfb5nlrd78wjU7mb1ZLL3nT3ChEqZ1
 2WYUU+INMalxvMRDnvheT4fR3ZGJtOfhn5vCWTO8IWfAzBPEkcVzNvwbKgKbur5u
 FImUcN4+bMuZOrpawiPgQahrsRAjkwjoBgCtPXLy5OZJAU2SFwHZla5eTapFFu7S
 7W3AK55Wod/EV1PLd9SURcvqV1lGZNa4Bzo2yw12NyOp/U8vT1h3N8DxZJuju9RJ
 1CdQAssv1EcH5pAB8Q3WXkqTynphioivvdXdzKn9pgUSHCUSd19EtquzK1nH2T04
 Hu8Yn//3zdvpdmg1prz4oifQMDP18YdkOY0n+9OwT5KK+3HPY7Ii9W5Fw+DkPNfw
 JivJqfkra/H8BvShYhmQ4qLcPoNAb9kBrZI+ZPnjsJHl3ktmn3RtpdwPlUAwPb2/
 OcAnHcQQASAxAW/iDRTZaC8GkSfi6F61hMlTy+ryNl7Adp+1tELStPaKqTo3CRXQ
 HsrBQPwPH1fIdvtgk+kd7bfsjbMeOYu0t/moWfWwzu4AbrUcEFbpfZxH7fYChjdz
 pmYqYsXigwlNIA0ATgSkxVVtSxbUyrgpzgl+IFaRx5sM0GUt3MABdG6bjH1tupdg
 yCC1g/SEVE3EFvcZGrUW
 =vSTJ
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-4.12-20170404' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

- Add missing number of samples in 'perf annotate --stdio -l --show-total-period'
  (Taeung Song)

Vendor events updates:

- Add uncore_arb Intel vendor events in JSON format (Andi Kleen)

- Add uncore vendor events for Intel's Sandy Bridge, Ivy Bridge,
  Haswell, Broadwell and Skylake architectures (Andi Kleen)

- Add missing UNC_M_DCLOCKTICKS Intel Broadwell DE uncore vendor event (Andi Kleen)

Infrastructure changes:

- Remove some more die() calls, avoiding sudden death in library code
  (Arnaldo Carvalho de Melo)

- Add argument support for SDT events in powerpc (Ravi Bangoria)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-04-05 07:40:16 +02:00
Sebastian Ott
561ecb0cf6 s390/pci: remove forward declaration
Move a struct definition to get rid of a forward declaration.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-04-05 07:35:24 +02:00
Sebastian Ott
b18601b076 s390/pci: increase the PCI_NR_FUNCTIONS default
Users complained that they are hitting the limit of 64 functions (some
physical functions can spawn lots of virtual functions). Double the
default limit. With the latest savings in static data usage this
increases the image size by only 520 bytes.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-04-05 07:35:23 +02:00
Sebastian Ott
b0c8ce897a s390/pci: reduce iomap size (even more)
Commit c506fff3d3 ("s390/pci: resize iomap") reduced the iomap
to NR_FUNCTIONS * PCI_BAR_COUNT elements. Since we only support
functions with 64bit BARs we can cut that number in half.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-04-05 07:35:22 +02:00
Sebastian Ott
4e0cca7d64 s390/pci: remove duplicated define
Address space identifiers are already defined in <asm/pci_insn.h>.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-04-05 07:35:21 +02:00
Sebastian Ott
02f5cb9fe8 s390/pci: remove unused function
barsize was never used. Get rid of it.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-04-05 07:35:20 +02:00
Martin Schwidefsky
cab36c262e s390: use 64-bit lctlg to load task pid to cr4 on context switch
The 32-bit lctl instruction is quite a bit slower than the 64-bit
counter part lctlg. Use the faster instruction.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2017-04-05 07:35:14 +02:00
Christian König
89bb5752c0 drm/amdgpu: use TTM_PL_FLAG_CONTIGUOUS v2
Implement AMDGPU_GEM_CREATE_VRAM_CONTIGUOUS using TTM_PL_FLAG_CONTIGUOUS
instead of a placement limit. That allows us to better handle CPU
accessible placements.

v2: prevent virtual BO start address from overflowing

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04 23:34:27 -04:00
Christian König
f75e237c41 drm/amdgpu: move adjust_mc_addr into amdgpu_gart_funcs
We should probably rename amdgpu_gart_funcs sooner or later.

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04 23:34:21 -04:00
Christian König
f7d015b90d drm/amdgpu: cleanup logic in amdgpu_vm_flush
Remove some of the extra checks where they don't hurt us.

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04 23:34:15 -04:00
Christian König
c0e51931a1 drm/amdgpu: cleanup coding style in amdgpu_vm_flush
Abort early if there is nothing todo and correctly indent the "if"s.

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04 23:34:09 -04:00
Christian König
641e940089 drm/amdgpu: coding style of amdgpu_vm_is_gpu_reset
The name is a bit confusing and the extra "? true : false" is superflous.

Additional to that remove setting the reset counter directly after checking it.

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04 23:34:03 -04:00
Christian König
6332ab906a drm/amdgpu: remove VMID first tracking
Not used any more.

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04 23:33:57 -04:00
Christian König
eb60ef2b4d drm/amdgpu: move VM related defines into amdgpu_vm.h
Try to clean up amdgpu.h.

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04 23:33:50 -04:00
Christian König
5a9b8e8a0b drm/amdgpu: fix VMHUB order to match the hardware
Match our defines with what the hw uses.

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04 23:33:44 -04:00
Christian König
b94e433660 drm/amdgpu: drop alpha support
We will probably never see this combination.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04 23:33:43 -04:00
Christian König
c8b26bd1d2 drm/ttm: add TTM_PL_FLAG_CONTIGUOUS v2
This allows drivers to specify if they need a contiguous allocation or not.

v2: use space instead of tab

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04 23:33:42 -04:00
Christian König
ea642c3216 drm/ttm: add io_mem_pfn callback
This allows the driver to handle io_mem mappings on their own.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04 23:33:42 -04:00
Christian König
018b7fc3a9 drm/ttm: cleanup and optimize ttm_bo_mem_compat v2
No need to implement the same logic twice. Also check if the busy placements
are identical to the already scanned placements before checking them.

v2: improve check even more as suggested by Michel.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04 23:33:41 -04:00
Alex Deucher
76e15e029b drm/amdgpu/vi: add defines for KIQ packets
Make it clearer how these packets work.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04 23:33:41 -04:00
Alex Deucher
1fdc639b7a drm/amdgpu/soc15: Fix static checker warnings
vega10 is the only soc15 asic at the moment so these
warnings are invalid, but add a default case to silence
the warnings.

Fixes: 220ab9bd1c: "drm/amdgpu: soc15 enable (v3)"
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-04-04 23:33:26 -04:00