Commit graph

678,699 commits

Author SHA1 Message Date
Neil Armstrong
e624f516d9 drm: bridge: dw-hdmi: Add Documentation on supported input formats
This patch adds a new DRM documentation entry and links to the input
format table added in the dw_hdmi header.

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 17:48:21 +02:00
Neil Armstrong
def23aa7e9 drm: bridge: dw-hdmi: Switch to V4L bus format and encodings
Switch code to use the newly introduced V4L bus formats IDs instead of custom
defines. Also use the V4L encoding defines.

Some display pipelines can only provide non-RBG input pixels to the HDMI TX
Controller, this patch takes the pixel format from the plat_data if provided.

Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 17:48:21 +02:00
Laurent Pinchart
a23d6265f0 drm: bridge: dw-hdmi: Extract PHY interrupt setup to a function
In preparation for adding PHY operations to handle RX SENSE and HPD,
group all the PHY interrupt setup code in a single location and extract
it to a separate function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
[narmstrong: renamed dw_hdmi_fb_registered to dw_hdmi_setup_i2c]
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 17:48:21 +02:00
Icenowy Zheng
d7bb5b9661 ARM: sunxi: h3/h5: switch apb0-related clocks to r_ccu
Now we have driver for the PRCM CCU, switch to use it instead of
old-style clock nodes for apb0-related clocks in sunxi-h3-h5.dtsi .

The mux 3 of R_CCU is still the internal oscillator, which is said to be
16MHz plus minus 30%, and get a measured value of 15MHz~16MHz on my two
H3 boards and one H5 board.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-04 17:45:24 +02:00
Icenowy Zheng
ec4279053a arm64: allwinner: a64: add R_PIO pinctrl node
Allwinner A64 have a dedicated pin controller to manage the PL pin bank.
As the driver and the required clock support are added, add the device
node for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-04 17:45:09 +02:00
Icenowy Zheng
791a9e001d arm64: allwinner: a64: add r_ccu node
A64 SoC have a CCU (r_ccu) in PRCM block.

Add the device node for it.

The mux 3 of R_CCU is an internal oscillator, which is 16MHz according
to the user manual, and has only 30% accuracy based on our experience
on older SoCs. The real mesaured value of it on two Pine64 boards is
around 11MHz, which is around 70% of 16MHz.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-04 17:44:57 +02:00
Sagi Grimberg
6ecda70ea9 nvme-loop: handle cpu unplug when re-establishing the controller
If a cpu unplug event has occured, we need to take the minimum
of the provided nr_io_queues and the number of online cpus,
otherwise we won't be able to connect them as blk-mq mapping
won't dispatch to those queues.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-04 09:44:43 -06:00
Sagi Grimberg
d476983ea0 nvme-loop: fix a possible use-after-free when destroying the admin queue
we need to destroy the nvmet sq and let it finish gracefully
before continue to cleanup the queue.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
2017-04-04 09:44:41 -06:00
Icenowy Zheng
cdb8b80b60 clk: sunxi-ng: add support for PRCM CCUs
SoCs after A31 has a clock controller module in the PRCM part.

Support the clock controller module on H3/5 and A64 now.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-04 17:43:52 +02:00
Icenowy Zheng
d4879bda91 dt-bindings: update device tree binding for Allwinner PRCM CCUs
Many Allwinner SoCs after A31 have a CCU in PRCM block.

Give the ones on H3 and A64 compatible strings.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-04 17:43:45 +02:00
Patrick Menschel
86daa3d30b ARM: dts: sun7i: Add can0_pins_a pinctrl settings
The A20 SoC has an on-board CAN controller. This patch adds
the pinctrl settings for pins PH20 and PH21.

This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-04 17:42:22 +02:00
Patrick Menschel
d2a20efbb1 ARM: dts: sun7i: Add CAN node
The A20 SoC has an on-board CAN controller.
This patch adds the device node.

The CAN controller is inherited from the A10 SoC and uses the same driver.

This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-04 17:42:10 +02:00
Patrick Menschel
908370f6cd ARM: dts: sun4i: Add can0_pins_a pinctrl settings
The A10 SoC has an on-board CAN controller. This patch adds the
pinctrl settings for pins PH20 and PH21.

This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-04 17:41:48 +02:00
Patrick Menschel
adb83474c1 ARM: dts: sun4i: Add CAN node
The A10 SoC has an on-board CAN controller.
This patch adds the device node.

This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt

Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2017-04-04 17:41:47 +02:00
Philipp Zabel
62e24c5775 reset: add exported __reset_control_get, return NULL if optional
Rename the internal __reset_control_get/put functions to
__reset_control_get/put_internal and add an exported
__reset_control_get equivalent to __of_reset_control_get
that takes a struct device parameter.
This avoids the confusing call to __of_reset_control_get in
the non-DT case and fixes the devm_reset_control_get_optional
function to return NULL if RESET_CONTROLLER is enabled but
dev->of_node == NULL.

Fixes: bb475230b8 ("reset: make optional functions really optional")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ramiro Oliveira <Ramiro.Oliveira@synopsys.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2017-04-04 17:36:10 +02:00
Akshay Bhat
57e83fb9b7 can: hi311x: Add Holt HI-311x CAN driver
This patch adds support for the Holt HI-311x CAN controller. The HI311x
CAN controller is capable of transmitting and receiving standard data
frames, extended data frames and remote frames. The HI311x interfaces
with the host over SPI.

Datasheet: www.holtic.com/documents/371-hi-3110_v-rev-jpdf.do

Signed-off-by: Akshay Bhat <nodeax@gmail.com>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-04 17:35:59 +02:00
Akshay Bhat
20a1e35511 can: holt_hi311x: document device tree bindings
Document the HOLT HI-311x CAN device tree bindings.

Signed-off-by: Akshay Bhat <nodeax@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-04 17:35:58 +02:00
Mario Kicherer
8e8cda6d73 can: initial support for network namespaces
This patch adds initial support for network namespaces. The changes only
enable support in the CAN raw, proc and af_can code. GW and BCM still
have their checks that ensure that they are used only from the main
namespace.

The patch boils down to moving the global structures, i.e. the global
filter list and their /proc stats, into a per-namespace structure and passing
around the corresponding "struct net" in a lot of different places.

Changes since v1:
 - rebased on current HEAD (2bfe01e)
 - fixed overlong line

Signed-off-by: Mario Kicherer <dev@kicherer.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-04 17:35:58 +02:00
Sean Paul
9eb8902e27 Merge tag 'topic/synopsys-media-formats-2017-04-03' of git://anongit.freedesktop.org/git/drm-misc into drm-misc-next
Media formats for synopsys HDMI  TX Controller

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170403163544.kcw5kk52tgku5xua@art_vandelay
2017-04-04 11:34:31 -04:00
Sean Paul
c829a33253 Merge airlied/drm-next into drm-misc-next
Backmerging in order to pull vmwgfx [1] and the new synopsys media
format [2] reqs.

[1]- http://patchwork.freedesktop.org/patch/msgid/20170331233255.GA38850@syeh-m02
[2]- http://patchwork.freedesktop.org/patch/msgid/20170403163544.kcw5kk52tgku5xua@art_vandelay

Signed-off-by: Sean Paul <seanpaul@chromium.org>
2017-04-04 11:26:14 -04:00
Liang Chen
09047cf4bc dt-bindings: add binding for rk3328-grf
This adds the compatible for the General Register Files on the new rk3328.

Signed-off-by: Liang Chen <cl@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2017-04-04 17:21:07 +02:00
Jon Hunter
18236a1488 arm64: tegra: Update the Tegra132 flowctrl compatible string
Update the Tegra132 flowctrl compatible string to include
"nvidia,tegra132-flowctrl" so it is aligned with the flowctrl binding
documentation.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-04 17:15:05 +02:00
Alexandre Courbot
dfd7a3845a arm64: tegra: Add GPU node for Tegra186
Add the DT node for the GP10B GPU on Tegra186.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-04 17:15:05 +02:00
Arnaldo Carvalho de Melo
9c0899f157 perf tools: Don't die on a print function
Trying to remove die() calls from library functions, postponing exiting
to the tool main code.

Link: http://lkml.kernel.org/n/tip-ackxq5nqe39gunln3tkczs42@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-04 12:11:07 -03:00
Arnaldo Carvalho de Melo
f05082b547 perf tools: Handle allocation failures gracefully
The callers of perf_read_values__enlarge_counters() already propagate
errors, so just print some debug diagnostics and handle allocation
failures gracefully, not trying to do silly things like 'a =
realloc(a)'.

Link: http://lkml.kernel.org/n/tip-nsmmh7uzpg35rzcl9nq7yztp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-04 12:05:37 -03:00
Yegor Yefremov
dabf54dd1c can: ti_hecc: Convert TI HECC driver to DT only driver
This patch converts TI HECC driver to DT only driver. This results in
removing ti_hecc.h containing now obsolete platform data.

Former transceiver_switch callback function will be now modelled via
regulator API.

Signed-off-by: Anton Glukhov <anton.a.glukhov@gmail.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-04 16:55:26 +02:00
Yegor Yefremov
869a78a2be can: ti_hecc: Add TI HECC DT binding documentation
DT binding documentation for TI High End CAN Controller

Signed-off-by: Anton Glukhov <anton.a.glukhov@gmail.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-04-04 16:55:26 +02:00
Arnaldo Carvalho de Melo
427748068a perf tools: Remove die() call
We can just use the exit() right after the branch calling die().

Link: http://lkml.kernel.org/n/tip-90athn06d7atf2jkpfvq1iic@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-04 11:36:22 -03:00
Jens Axboe
8945927cb7 Merge branch 'nvme-4.11-rc' of git://git.infradead.org/nvme into for-linus
Sagi writes:

We have one spec mis-match fix from Roland and several sparse fixes from
Christoph.
2017-04-04 08:35:01 -06:00
Alban Crequy
696ced4fb1 tracing/kprobes: expose maxactive for kretprobe in kprobe_events
When a kretprobe is installed on a kernel function, there is a maximum
limit of how many calls in parallel it can catch (aka "maxactive"). A
kernel module could call register_kretprobe() and initialize maxactive
(see example in samples/kprobes/kretprobe_example.c).

But that is not exposed to userspace and it is currently not possible to
choose maxactive when writing to /sys/kernel/debug/tracing/kprobe_events

The default maxactive can be as low as 1 on single-core with a
non-preemptive kernel. This is too low and we need to increase it not
only for recursive functions, but for functions that sleep or resched.

This patch updates the format of the command that can be written to
kprobe_events so that maxactive can be optionally specified.

I need this for a bpf program attached to the kretprobe of
inet_csk_accept, which can sleep for a long time.

This patch includes a basic selftest:

> # ./ftracetest -v  test.d/kprobe/
> === Ftrace unit tests ===
> [1] Kprobe dynamic event - adding and removing	[PASS]
> [2] Kprobe dynamic event - busy event check	[PASS]
> [3] Kprobe dynamic event with arguments	[PASS]
> [4] Kprobes event arguments with types	[PASS]
> [5] Kprobe dynamic event with function tracer	[PASS]
> [6] Kretprobe dynamic event with arguments	[PASS]
> [7] Kretprobe dynamic event with maxactive	[PASS]
>
> # of passed:  7
> # of failed:  0
> # of unresolved:  0
> # of untested:  0
> # of unsupported:  0
> # of xfailed:  0
> # of undefined(test bug):  0

BugLink: https://github.com/iovisor/bcc/issues/1072
Link: http://lkml.kernel.org/r/1491215782-15490-1-git-send-email-alban@kinvolk.io

Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2017-04-04 10:32:03 -04:00
Ladi Prosek
1fb883bb82 KVM: nVMX: initialize PML fields in vmcs02
L2 was running with uninitialized PML fields which led to incomplete
dirty bitmap logging. This manifested as all kinds of subtle erratic
behavior of the nested guest.

Fixes: 843e433057 ("KVM: VMX: Add PML support in VMX")
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-04-04 16:24:43 +02:00
Mauro Carvalho Chehab
7ca0ef3da0 Linux 4.11-rc5
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJY4ZYkAAoJEHm+PkMAQRiGsq4H/R4PMXDoe2XhSSk7IoT97pXV
 /A8np/scAPjzEgYUidbb54OSqWwsPRuPGWONTFeSrE2u0L4wln/REI91jg7QetLq
 IisncExlYeJ/XQ+iO0ZZh9fLbqwIlEJFdSXmyIFr3m/TBxe8a61C8j93oNgM1tHT
 yuwzlq7c3sLq2hsmUG2HyL2kJsEfRasv4Rk0yhFuti12zVsBoTW4qmZuMauq+gdf
 f7cSYgiHhPTdb2o+azg5O7uYNHaQQBxdUMlIuhhYtVOUq+pFDO23SLHSFIW2NwOm
 Zn5R6CFSrLsCw0Bx0v8Xlc151QUbaRK4h9lhUhkBr6d3uNShU1NQ9JojpSvYwBo=
 =vP6E
 -----END PGP SIGNATURE-----

Merge tag 'v4.11-rc5' into patchwork

Linux 4.11-rc5

* tag 'v4.11-rc5': (1168 commits)
  Linux 4.11-rc5
  tty: pl011: fix earlycon work-around for QDF2400 erratum 44
  kasan: do not sanitize kexec purgatory
  drivers/rapidio/devices/tsi721.c: make module parameter variable name unique
  mm/hugetlb.c: don't call region_abort if region_chg fails
  kasan: report only the first error by default
  hugetlbfs: initialize shared policy as part of inode allocation
  mm: fix section name for .data..ro_after_init
  mm, hugetlb: use pte_present() instead of pmd_present() in follow_huge_pmd()
  mm: workingset: fix premature shadow node shrinking with cgroups
  mm: rmap: fix huge file mmap accounting in the memcg stats
  mm: move mm_percpu_wq initialization earlier
  mm: migrate: fix remove_migration_pte() for ksm pages
  nfs: flexfiles: fix kernel OOPS if MDS returns unsupported DS type
  NFSv4.1 fix infinite loop on IO BAD_STATEID error
  serial: 8250_EXAR: fix duplicate Kconfig text and add missing help text
  tty/serial: atmel: fix TX path in atmel_console_write()
  tty/serial: atmel: fix race condition (TX+DMA)
  serial: mxs-auart: Fix baudrate calculation
  irqchip/mips-gic: Fix Local compare interrupt
  ...
2017-04-04 11:11:43 -03:00
Jan Beulich
ac4cde398a xenbus: remove transaction holder from list before freeing
After allocation the item is being placed on the list right away.
Consequently it needs to be taken off the list before freeing in the
case xenbus_dev_request_and_reply() failed, as in that case the
callback (xenbus_dev_queue_reply()) is not being called (and if it
was called, it should do both).

Fixes: 5584ea250a
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-04-04 10:11:06 -04:00
Ladi Prosek
ab007cc94f KVM: nVMX: do not leak PML full vmexit to L1
The PML feature is not exposed to guests so we should not be forwarding
the vmexit either.

This commit fixes BSOD 0x20001 (HYPERVISOR_ERROR) when running Hyper-V
enabled Windows Server 2016 in L1 on hardware that supports PML.

Fixes: 843e433057 ("KVM: VMX: Add PML support in VMX")
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-04-04 16:11:06 +02:00
Alexandre Courbot
bf594a896c dt-bindings: Add documentation for GP10B GPU
GP10B's definition is mostly similar to GK20A's and GM20B's. The only
noticeable difference is the use of power domains instead of a regulator
for power supply.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-04 16:08:18 +02:00
Jon Hunter
1116d5a7af clk: tegra: Don't reset PLL-CX if it is already enabled
Commit 8dce89a1c2 ("clk: tegra: Don't warn for PLL defaults
unnecessarily") changed the tegra210_pllcx_set_defaults() function
causing the PLL to always be reset regardless of whether it is in-use.
This function was changed so that resetting of the PLL will only be
skipped if the PLL is enabled AND 'pllcx->params->defaults_set' is not
true. However, the 'pllcx->params->defaults_set' is always true and
hence, the PLL is now always reset. This causes the boot to fail on the
Tegra210 Smaug where the PLL is already enabled and in-use. Fix this by
only resetting the PLL if not in-use and only printing the warning that
the defaults are not set after we have checked the default settings.

Fixes: 8dce89a1c2 ("clk: tegra: Don't warn for PLL defaults unnecessarily")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-04 16:06:05 +02:00
Koji Matsuoka
0dda563e57 drm: rcar-du: Add HDMI outputs to R8A7795 device description
Update the device description with the two available HDMI outputs.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:04:21 +03:00
Koji Matsuoka
dc4aedbf7c drm: rcar-du: Add DPLL support
The implementation hardcodes a workaround for the H3 ES1.x SoC
regardless of the SoC revision, as the workaround can be safely applied
on all devices in the Gen3 family without any side effect.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:04:19 +03:00
Laurent Pinchart
4739a0d40b drm: rcar-du: Skip disabled outputs
When a DT node connected to a DU output is disabled no bridge will ever
be instantiated for it. Skip the output in that case.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:04:17 +03:00
Koji Matsuoka
40d0fa7095 drm: rcar-du: Add Gen3 HDMI encoder support
The R-Car Gen3 SoCs include on-chip DesignWare HDMI encoders. Support
them with a platform driver to provide platform glue data to the dw-hdmi
driver.

The driver is a complete rewrite of code coming from the Renesas BSP,
save for the values in the PHY parameters table.

Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
2017-04-04 17:04:13 +03:00
Laurent Pinchart
907c1bbd51 dt-bindings: display: renesas: Add R-Car Gen3 HDMI TX DT bindings
The Renesas R-Car Gen3 SoCs use a Synopsys DWC HDMI TX encoder IP. Add
corresponding device tree bindings based on the DWC HDMI TX bindings
model.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
2017-04-04 17:04:10 +03:00
Laurent Pinchart
381ddfe478 drm: rcar-du: Hardcode encoders types to DRM_MODE_ENCODER_NONE
Unlike the connector type, the encoder type is unused by userspace. As
it is equally unused in the driver, except in a single location where
the connector type can be used instead, hardcode it to
DRM_MODE_ENCODER_NONE. This allow removing all code that tries to
determine (unsuccessfully in case a bridge is used) the encoder type.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:04:04 +03:00
Laurent Pinchart
5c602531fe drm: rcar-du: Replace manual bridge implementation with DRM bridge
The rcar-du driver contains a manual implementation of HDMI and VGA
bridges. Use DRM bridges to replace it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:04:02 +03:00
Laurent Pinchart
e947eccbeb drm: rcar-du: Add support for LVDS mode selection
Retrieve the LVDS mode from the panel and configure the LVDS encoder
accordingly. LVDS mode selection is static as LVDS panels can't be
hot-plugged on any of the device supported by the driver. Support for
dynamic mode selection can be implemented in the future when needed.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:03:57 +03:00
Laurent Pinchart
bf7149f342 drm: rcar-du: Use the DRM panel API
Instead of parsing the panel device tree node manually, use the panel
API to delegate panel handling to a panel driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:03:56 +03:00
Laurent Pinchart
06711e6385 drm: rcar-du: Document the vsps property in the DT bindings
The property is used by the driver but is missing from the DT bindings.
Document it.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:03:54 +03:00
Laurent Pinchart
eff7fd6ba5 drm: rcar-du: Remove wait field from rcar_du_device structure
The field is a left-over from the switch to the atomic commit helper.
It's unused, remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:03:52 +03:00
Jacopo Mondi
3115345577 drm: rcar-du: Make sure the VSP is initialized on platforms that need it
On Gen3 platforms planes are managed by the external VSP compositor on
behalf of DRM/KMS. If VSP compositor support is not enabled in the DU
driver, the VSP initialization stub routine is called. Return an error
from that stub to fail explicitly, otherwise the device won't be usable
and the driver will crash.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[Clarified commit message]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:03:50 +03:00
Laurent Pinchart
a8fd12233e drm: rcar-du: Use DRM core's atomic commit helper
The DRM core atomic helper now supports asynchronous commits natively.
The custom rcar-du implementation isn't needed anymore, remove it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:03:48 +03:00
Laurent Pinchart
15b181a309 drm: rcar-du: Clear handled event pointer in CRTC state
The atomic commit helper requires drivers to clear the event pointer
stored in the CRTC state when the event is handled. In preparation to
using the helper, fix the driver.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2017-04-04 17:03:47 +03:00