Commit graph

678,699 commits

Author SHA1 Message Date
Vivien Didelot
64014fe67b net: dsa: mv88e6xxx: unconditionally set ATU trunk
Set the trunk member of the mv88e6xxx_atu_entry structure regardless its
value, so that uninitialized structures gets the correct boolean value.

Note that no mainline code is affected by the current behavior.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 22:04:51 -07:00
Vlad Yasevich
382ed72480 ipv6: add support for NETDEV_RESEND_IGMP event
This patch adds support for NETDEV_RESEND_IGMP event similar
to how it works for IPv4.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 22:02:21 -07:00
Jarno Rajahalme
b768b16de5 openvswitch: Fix refcount leak on force commit.
The reference count held for skb needs to be released when the skb's
nfct pointer is cleared regardless of if nf_ct_delete() is called or
not.

Failing to release the skb's reference cound led to deferred conntrack
cleanup spinning forever within nf_conntrack_cleanup_net_list() when
cleaning up a network namespace:

   kworker/u16:0-19025 [004] 45981067.173642: sched_switch: kworker/u16:0:19025 [120] R ==> rcu_preempt:7 [120]
   kworker/u16:0-19025 [004] 45981067.173651: kernel_stack: <stack trace>
=> ___preempt_schedule (ffffffffa001ed36)
=> _raw_spin_unlock_bh (ffffffffa0713290)
=> nf_ct_iterate_cleanup (ffffffffc00a4454)
=> nf_conntrack_cleanup_net_list (ffffffffc00a5e1e)
=> nf_conntrack_pernet_exit (ffffffffc00a63dd)
=> ops_exit_list.isra.1 (ffffffffa06075f3)
=> cleanup_net (ffffffffa0607df0)
=> process_one_work (ffffffffa0084c31)
=> worker_thread (ffffffffa008592b)
=> kthread (ffffffffa008bee2)
=> ret_from_fork (ffffffffa071b67c)

Fixes: dd41d33f0b ("openvswitch: Add force commit.")
Reported-by: Yang Song <yangsong@vmware.com>
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 21:56:11 -07:00
David S. Miller
25501837d8 Merge branch 'dsa-mv88e6xxx-fix-chip-definitions'
Vivien Didelot says:

====================
net: dsa: fix chip definitions

The definitions of some of the mv88e6xxx_ops and mv88e6xxx_info
structures are misordered and erroneous for 88E6191 and 88E6391.

This patch series cleans that up.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 21:52:53 -07:00
Vivien Didelot
63709570cd net: dsa: mv88e6xxx: remove 88E6391 ops
We don't support 88E6391 anywhere in the code, so remove the unused
mv88e6391_ops structure.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 21:52:52 -07:00
Vivien Didelot
2cf4cefb69 net: dsa: mv88e6xxx: fix 88E6191 ops
The mv88e6xxx_info structure for the 88E6191 chip was pointing the
mv88e6391_ops definition instead of mv88e6191_ops. Fix this.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 21:52:52 -07:00
Vivien Didelot
16e329aea9 net: dsa: mv88e6xxx: reorder 88E6341 definitions
The related mv88e6xxx_ops structure was misplaced. Reorder it correctly
to fix this.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 21:52:52 -07:00
Vivien Didelot
990e27b033 net: dsa: mv88e6xxx: reorder 88E6141 definitions
The related mv88e6xxx_ops and mv88e6xxx_info structure were misplaced.
Reorder them correctly to fix this.

Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 21:52:52 -07:00
Arnd Bergmann
16b8b6de32 rocker: fix Wmaybe-uninitialized false-positive
gcc-7 reports a warning that earlier versions did not have:

drivers/net/ethernet/rocker/rocker_ofdpa.c: In function 'ofdpa_port_stp_update':
arch/x86/include/asm/string_32.h:79:22: error: '*((void *)&prev_ctrls+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized]
   *((short *)to + 2) = *((short *)from + 2);
   ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/rocker/rocker_ofdpa.c:2218:7: note: '*((void *)&prev_ctrls+4)' was declared here

This is clearly a variation of the warning about 'prev_state' that
was shut up using uninitialized_var().

We can slightly simplify the code and get rid of the warning by unconditionally
saving the prev_state and prev_ctrls variables. The inlined memcpy is not
particularly expensive here, as it just has to read five bytes from one or
two cache lines.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 21:42:32 -07:00
Harninder Rai
7a5d73479f arm64: dts: Add support for FSL's LS1088A SoC
LS1088A contains eight ARM v8 CortexA53 processor cores
with 32 KB L1-D cache and 32 KB L1-I cache

Features summary
 Eight 32-bit / 64-bit ARM v8 Cortex-A53 CPUs
  - Arranged as two clusters of four cores sharing a 1 MB L2 cache
  - Speed Up to 1.5 GHz
  - Support for cluster power-gating.
 Cache coherent interconnect (CCI-400)
  - Hardware-managed data coherency
  - Up to 700 MHz
 One 64-bit DDR4 SDRAM memory controller with ECC
 Data path acceleration architecture 2.0 (DPAA2)
 Three PCIe 3.0 controllers
 One serial ATA (SATA 3.0) controller
 Three high-speed USB 3.0 controllers with integrated PHY

 Following levels of DTSI/DTS files have been created for the LS1088A
  SoC family:

         - fsl-ls1088a.dtsi:
                 DTS-Include file for NXP LS1088A SoC.

         - fsl-ls1088a-qds.dts:
                 DTS file for NXP LS1088A QDS board.

         - fsl-ls1088a-rdb.dts:
                 DTS file for NXP LS1088A RDB board

Signed-off-by: Harninder Rai <harninder.rai@nxp.com>
Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com>`
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-29 11:53:19 +08:00
Al Viro
839cc2954c arc: switch to RAW_COPY_USER
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28 23:41:31 -04:00
Zhenyu Wang
8bcad07a45 drm/i915/gvt: fix error return check for copy_gma_to_hva()
From commit 73dec95e6b ("drm/i915: Emit to ringbuffer directly"),
copy_gma_to_hva() now returns copied data length instead of 0, so
need to change error return check for that.

Note: Looks this is caused by backmerge conflict resolving, so
4.11-rc4 is not impacted as commit 73dec95e6b ("drm/i915: Emit to
ringbuffer directly") is not in 4.11. But need to fix this before I
can apply 4.12 stuff against drm-intel-next correctly.

Fixes: e5c1ff1475 ("Backmerge tag 'v4.11-rc4' into drm-next")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-03-29 13:38:01 +10:00
Horia Geantă
85b85c5695 arm64: dts: ls1012a: add crypto node
LS1012A has a SEC v5.4 security engine.

Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-03-29 11:02:32 +08:00
Chuck Lever
23abec20aa svcrdma: set XPT_CONG_CTRL flag for bc xprt
Same change as Kinglong Mee's fix for the TCP backchannel service.

Fixes: 5283b03ee5 ("nfs/nfsd/sunrpc: enforce transport...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-03-28 21:25:55 -04:00
Talat Batheesh
e497ec680c net/mlx5: Avoid dereferencing uninitialized pointer
In NETDEV_CHANGEUPPER event the upper_info field is valid
only when linking is true. Otherwise it should be ignored.

Fixes: 7907f23adc (net/mlx5: Implement RoCE LAG feature)
Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Reviewed-by: Aviv Heller <avivh@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 18:07:15 -07:00
David S. Miller
c552a50e5c Merge branch 'qed-load-unload-mfw'
Yuval Mintz says:

====================
qed: load/unload mfw series

This series correct the unload flow and greatly enhances its
initialization flow in regard to interactions between driver
and management firmware.

Patch #1 makes sure unloading is done under management-firmware's
'criticial section' protection.

Patches #2 - #4 move driver into using a newer scheme for loading
in regard to the MFW; This newer scheme would help cleaning the device
in case a previous instance has dirtied it [preboot, PDA, etc.].

Patches #5 - #6 let driver inform management-firmware on number of
resources which are dependent on the non-management firmware used.
Patch #7 then uses a new resource [BDQ] instead of some set value.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 18:05:24 -07:00
Mintz, Yuval
d0d40a73f1 qed: Use BDQ resource for storage protocols
Until now, qed used some port-defined value as BDQ index for both iSCSI
and FCoE.

As management firmware now treats BDQ as a resource and tells each PF
its BDQ-range, start using a valure from that range instead.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 18:05:24 -07:00
Tomer Tayar
9c8517c40f qed: Utilize resource-lock based scheme
Management firmware is used as an arbiter between the various PFs
in matters of resources, but some of the resources that need to
be divided are dependent on the non-management firmware used,
so management firmware first needs to be told how many resources
there are before trying to divide them.

As part of the initialization sequence, driver would first inform
the management firmware of the available resources under
a dedicated resource lock, and afterwards request for various
resources which might be based on the previous set values.

Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 18:05:24 -07:00
Tomer Tayar
95691c9cea qed: Support management-based resource locking
Global locking can't properly be used to synchronize between different
PFs in all scenarios, as those instances might reside in different
logical partitions [e.g., when a PF is assigned via PDA to some VM].

The management firmware provides a generic infrastructure for
device locks. For each 'resource', it's guaranteed it could be acquired
by at most a single PF at any given time [or by management firmware].

This patch adds the necessary logic in qed for utilizing said
infrastructure, implementing lock/unlock internal APIs.

Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 18:05:23 -07:00
Mintz, Yuval
18a69e368b qed: Send pf-flr as part of initialization
During HW initialization, driver would set various registers to their
needed values - but it assumes all registers start at their reset-value,
so there's no need to re-configure a register's default value.

This assumption might be incorrect, e.g., in case of preboot driver
running and initializing the driver prior to our driver.

To overcome this, we now ask management firmware to initiate a PF-flr
early during the initialization sequence. That would return everything
in the PF's scope back to default and prevent previous configurations
from still being applied.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 18:05:23 -07:00
Tomer Tayar
5d24bcf189 qed: Move to new load request scheme
Management firmware is used as an arbiter between the various PFs
in regard to loading - it causes the various PFs to load/unload
sequentially and informs each of its appropriate rule in the init.

But the existing flow is too weak to handle some scenarios where
PFs aren't properly cleaned prior to loading.
The significant scenarios falling under this criteria:
  a. Preboot drivers in some environment can't properly unload.
  b. Unexpected driver replacement [kdump, PDA].

Modern management firmware supports a more intricate loading flow,
where the driver has the ability to overcome previous limitations.
This moves qed into using this newer scheme.

Notice new scheme is backward compatible, so new drivers would
still be able to load properly on top of older management firmwares
and vice versa.

Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 18:05:23 -07:00
Mintz, Yuval
c0c2d0b49e qed: hw_init() to receive parameter-struct
We'll soon need additional information, so start by changing
the infrastructure to receive the initializing variables
via a parameter struct.

Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 18:05:23 -07:00
Tomer Tayar
1226337ad9 qed: Correct HW stop flow
Management firmware is used as arbiter between different PFs
which are loading/unloading, but in order to use the synchronization
it offers the contending configurations need to be applied either
between their LOAD_REQ <-> LOAD_DONE or UNLOAD_REQ <-> UNLOAD_DONE
management firmware commands.

Existing HW stop flow utilizes 2 different functions: qed_hw_stop() and
qed_hw_reset() which don't abide this requirement; Most of the closure
is doing outside the scope of the unload request.

This patch removes qed_hw_reset() and places the relevant stop
functionality underneath the management firmware protection.

Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 18:05:23 -07:00
David S. Miller
30b38236e1 Merge branch 'tipc-subscription-refcount-simplifications'
Parthasarathy Bhuvaragan says:

====================
tipc: subscription refcount simplifications

The first patch makes the subscription refcount cleanup lockless and
the second updates the subscription refcount policy.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 18:03:33 -07:00
Ying Xue
7efea60dcf tipc: adjust the policy of holding subscription kref
When a new subscription object is inserted into name_seq->subscriptions
list, it's under name_seq->lock protection; when a subscription is
deleted from the list, it's also under the same lock protection;
similarly, when accessing a subscription by going through subscriptions
list, the entire process is also protected by the name_seq->lock.

Therefore, if subscription refcount is increased before it's inserted
into subscriptions list, and its refcount is decreased after it's
deleted from the list, it will be unnecessary to hold refcount at all
before accessing subscription object which is obtained by going through
subscriptions list under name_seq->lock protection.

Signed-off-by: Ying Xue <ying.xue@windriver.com>
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 18:03:33 -07:00
Ying Xue
139bb36f75 tipc: advance the time of deleting subscription from subscriber->subscrp_list
After a subscription object is created, it's inserted into its
subscriber subscrp_list list under subscriber lock protection,
similarly, before it's destroyed, it should be first removed from
its subscriber->subscrp_list. Since the subscription list is
accessed with subscriber lock, all the subscriptions are valid
during the lock duration. Hence in tipc_subscrb_subscrp_delete(), we
remove subscription get/put and the extra subscriber unlock/lock.

After this change, the subscriptions refcount cleanup is very simple
and does not access any lock.

Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 18:03:32 -07:00
Jonas Jensen
c2b341a620 net: moxa: fix TX overrun memory leak
moxart_mac_start_xmit() doesn't care where tx_tail is, tx_head can
catch and pass tx_tail, which is bad because moxart_tx_finished()
isn't guaranteed to catch up on freeing resources from tx_tail.

Add a check in moxart_mac_start_xmit() stopping the queue at the
end of the circular buffer. Also add a check in moxart_tx_finished()
waking the queue if the buffer has TX_WAKE_THRESHOLD or more
free descriptors.

While we're at it, move spin_lock_irq() to happen before our
descriptor pointer is assigned in moxart_mac_start_xmit().

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=99451

Signed-off-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 18:02:05 -07:00
Arnd Bergmann
589a1a2e63 stmmac: use netif_set_real_num_{rx,tx}_queues
A driver must not access the two fields directly but should instead use
the helper functions to set the values and keep a consistent internal
state:

ethernet/stmicro/stmmac/stmmac_main.c: In function 'stmmac_dvr_probe':
ethernet/stmicro/stmmac/stmmac_main.c:4083:8: error: 'struct net_device' has no member named 'real_num_rx_queues'; did you mean 'real_num_tx_queues'?

Fixes: a8f5102af2 ("net: stmmac: TX and RX queue priority configuration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 18:00:34 -07:00
Arnd Bergmann
af109a2cf6 isdn: kcapi: avoid uninitialized data
gcc-7 points out that the AVMB1_ADDCARD ioctl results in an unintialized
value ending up in the cardnr parameter:

drivers/isdn/capi/kcapi.c: In function 'old_capi_manufacturer':
drivers/isdn/capi/kcapi.c:1042:24: error: 'cdef.cardnr' may be used uninitialized in this function [-Werror=maybe-uninitialized]
   cparams.cardnr = cdef.cardnr;

This has been broken since before the start of the git history, so
either the value is not used for anything important, or the ioctl
command doesn't get called in practice.

Setting the cardnr to zero avoids the warning and makes sure
we have consistent behavior.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:59:33 -07:00
Bjorn Andersson
2b62425045 soc: qcom: smd-rpm: Add msm8996 compatibility
With the RPM driver transitioned to RPMSG we can reuse the SMD-RPM
driver ontop of GLINK for 8996, without any modifications.

Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:58:08 -07:00
Bjorn Andersson
395a48053a soc: qcom: smd: Remove standalone driver
Remove the standalone SMD implementation as we have transitioned the
client drivers to use the RPMSG based one.

Also remove all dependencies on QCOM_SMD from Kconfig files, in order to
keep them selectable in the absence of the removed symbol.

Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:58:07 -07:00
Bjorn Andersson
5052de8def soc: qcom: smd: Transition client drivers from smd to rpmsg
By moving these client drivers to use RPMSG instead of the direct SMD
API we can reuse them ontop of the newly added GLINK wire-protocol
support found in the 820 and 835 Qualcomm platforms.

As the new (RPMSG-based) and old SMD implementations are mutually
exclusive we have to change all client drivers in one commit, to make
sure we have a working system before and after this transition.

Acked-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Kalle Valo <kvalo@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:58:07 -07:00
Roopa Prabhu
def499c929 vxlan: don't age NTF_EXT_LEARNED fdb entries
vxlan driver already implicitly supports installing
of external fdb entries with NTF_EXT_LEARNED. This
patch just makes sure these entries are not aged
by the vxlan driver. An external entity managing these
entries will age them out. This is consistent with
the use of NTF_EXT_LEARNED in the bridge driver.

Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:57:16 -07:00
Xin Long
f9ba3501d5 sctp: change to save MSG_MORE flag into assoc
David Laight noticed the support for MSG_MORE with datamsg->force_delay
didn't really work as we expected, as the first msg with MSG_MORE set
would always block the following chunks' dequeuing.

This Patch is to rewrite it by saving the MSG_MORE flag into assoc as
David Laight suggested.

asoc->force_delay is used to save MSG_MORE flag before a msg is sent.
All chunks in queue would not be sent out if asoc->force_delay is set
by the msg with MSG_MORE flag, until a new msg without MSG_MORE flag
clears asoc->force_delay.

Note that this change would not affect the flush is generated by other
triggers, like asoc->state != ESTABLISHED, queue size > pmtu etc.

v1->v2:
  Not clear asoc->force_delay after sending the msg with MSG_MORE flag.

Fixes: 4ea0c32f5f ("sctp: add support for MSG_MORE")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: David Laight <david.laight@aculab.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:56:15 -07:00
David S. Miller
2a69ca7148 Merge branch 'net-dpipe'
Jiri Pirko says:

====================
Add support for pipeline debug (dpipe)

Arkadi says:

While doing the hardware offloading process much of the hardware
specifics cannot be presented. An example for such is the routing
LPM algorithm which differ in hardware implementation from the
kernel software implementation. The only information the user receives
is whether specific route is offloaded or not, but he cannot really
understand the underlying implementation nor get the specific statistics
related to that process.

Another example is ACL offload using TC which is commonly implemented
using TCAM memory. Currently there is no capability to gain visibility
into the TCAM structure and to debug suboptimal resource allocation.

This patchset introduces capability for exporting the ASICs pipeline
abstraction via devlink infrastructure, which should serve as an
complementary tool. This infrastructure allows the user to get visibility
into the ASIC by modeling it as a set of match/action tables.

The main objects defined:
Table - abstraction for a single pipeline stage. Contains the
        available match/actions and counter availability.
Entry - entry in a specific table with specific matches/actions
        values and dedicated counter.
Header/field - tuples which describes the tables behavior.

As an example one of the ASIC's L3 blocks will be modeled. The egress
rif (router interface) table is the final step in the L3 pipeline
processing which does match on the internal rif index which was
determined before by the routing logic. The erif table determines
whether to forward or drop the packet and updates the corresponding
rif L3 statistics.

To expose this internal resources a special metadata header will
be introduced that describes the internal information gathered by
the ASIC's pipeline and contains the following fields: rif_port_index,
forward and drop.

Some internal hardware resources have direct mapping to kernel
objects. For example the rif_port_index is mapped to the net-devices
ifindex. By providing this mapping the users gains visibility into
the offloading process.

Follow-up work will include exporting more L3 tables which will give
visibility into the routing process.

First stage is adding support for dpipe in devlink. Next add support
in spectrum driver. Finally implement egress router interface
(erif) table for spectrum ASIC as an example.

---
v1->v2: Please see individual patches
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:11:56 -07:00
Arkadi Sharshevsky
2ba5999f00 mlxsw: spectrum: Add Support for erif table entries access
Implement dpipe's table ops for erif table which provide:
1. Getting the entries in the table with the associate values.
	- match on "mlxsw_meta:erif_index"
	- action on "mlxsw_meta:forwared_out"
2. Synchronize the hardware in case of enabling/disabling counters which
   mean removing erif counters from all interfaces.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:11:55 -07:00
Arkadi Sharshevsky
fd1b9d4192 mlxsw: spectrum_router: Add rif helper functions
Add rif helper function to access the rif index and rif devices ifindex.
This functions will be used by dpipe in order to dump the rif table.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:11:55 -07:00
Arkadi Sharshevsky
e0c0afd8aa mlxsw: spectrum: Support for counters on router interfaces
Add support for counter allocation on router interfaces. The allocation
depends on the counter state of relevant table. In case the counting is
disabled or no counters left the counter index will be set as invalid.

Also a counter pool for router allocation is added.

Signed-off-by: Arakdi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:11:55 -07:00
Arkadi Sharshevsky
ba73e97a63 mlxsw: reg: Add Router Interface Counter Register
The RICNT register retrieves per port performance counter. It will be
used to query the router interfaces statistics.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:11:55 -07:00
Arkadi Sharshevsky
d54b70feb6 mlxsw: spectrum: Add definition for egress rif table
Add definition for egress router interface table. This table describes
the final part in the routing pipeline. This table matches the egress
interface index (rif index, which is set by the previous stages and
determine the out port) and makes the decision of forwarding the packet
towards the L2 logic or dropping it.

The metadata header is added to represent this internal information.
The rif index field is mapped logically to netdevice ifindex.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:11:54 -07:00
Arkadi Sharshevsky
230ead0141 mlxsw: spectrum: Add placeholder for dpipe
Add placeholder for dpipe. Support for specific tables and headers will
be introduced in following patches. The headers are shared between all
mlxsw_sp instances.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:11:54 -07:00
Arkadi Sharshevsky
0f630fcbe5 mlxsw: reg: Add counter fields to RITR register
Update RITR for counter support. This allows adding counters for
ASIC's router ports.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:11:54 -07:00
Arkadi Sharshevsky
1555d204e7 devlink: Support for pipeline debug (dpipe)
The pipeline debug is used to export the pipeline abstractions for the
main objects - tables, headers and entries. The only support for set is
for changing the counter parameter on specific table.

The basic structures:

Header - can represent a real protocol header information or internal
         metadata. Generic protocol headers like IPv4 can be shared
         between drivers. Each driver can add local headers.

Field - part of a header. Can represent protocol field or specific ASIC
        metadata field. Hardware special metadata fields can be mapped
        to different resources, for example switch ASIC ports can have
        internal number which from the systems point of view is mapped
        to netdeivce ifindex.

Match - represent specific match rule. Can describe match on specific
        field or header. The header index should be specified as well
        in order to support several header instances of the same type
        (tunneling).

Action - represents specific action rule. Actions can describe operations
         on specific field values for example like set, increment, etc.
         And header operation like add and delete.

Value - represents value which can be associated with specific match or
        action.

Table - represents a hardware block which can be described with match/
        action behavior. The match/action can be done on the packets
        data or on the internal metadata that it gathered along the
        packets traversal throw the pipeline which is vendor specific
        and should be exported in order to provide understanding of
        ASICs behavior.

Entry - represents single record in a specific table. The entry is
        identified by specific combination of values for match/action.

Prior to accessing the tables/entries the drivers provide the header/
field data base which is used by driver to user-space. The data base
is split between the shared headers and unique headers.

Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28 17:11:54 -07:00
Jaegeuk Kim
c541a51b8c f2fs: fix wrong max cost initialization
This patch fixes missing increased max cost caused by a patch that we increased
cose of data segments in greedy algorithm.

Cc: <stable@vger.kernel.org> # v4.10+
Fixes: b9cd20619 "f2fs: node segment is prior to data segment selected victim"
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-03-28 15:49:27 -07:00
Al Viro
3a0e75adec xtensa: get rid of zeroing, use RAW_COPY_USER
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28 18:24:07 -04:00
Al Viro
0b46a94e84 xtensa: switch to generic extable.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28 18:24:07 -04:00
Al Viro
3f763453e6 kill __copy_from_user_nocache()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28 18:24:05 -04:00
Al Viro
2ef59f2856 unicore32: get rid of zeroing and switch to RAW_COPY_USER
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28 18:24:04 -04:00
Al Viro
122b05ddf5 amd64: get rid of zeroing
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28 18:24:04 -04:00
Al Viro
a668ce3a00 um: switch to RAW_COPY_USER
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-03-28 18:24:03 -04:00