Avoid that the following error message is reported on the console
while loading an RDMA driver with I/O MMU support enabled:
DMAR: Allocating domain for mlx5_0 failed
Ensure that DMA mapping operations that use to_pci_dev() to
access to struct pci_dev see the correct PCI device. E.g. the s390
and powerpc DMA mapping operations use to_pci_dev() even with I/O
MMU support disabled.
This patch preserves the following changes of the DMA mapping updates
patch series:
- Introduction of dma_virt_ops.
- Removal of ib_device.dma_ops.
- Removal of struct ib_dma_mapping_ops.
- Removal of an if-statement from each ib_dma_*() operation.
- IB HW drivers no longer set dma_device directly.
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reported-by: Parav Pandit <parav@mellanox.com>
Fixes: commit 99db949403 ("IB/core: Remove ib_device.dma_device")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: parav@mellanox.com
Tested-by: parav@mellanox.com
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
All Soft-RoCE (rxe) is handled now in rdma-core user space library,
so the documentation. The patch below updates the documentation
link to that new location.
Reported-by: Josh Beavers <josh.beavers@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We want to return zero on success or negative error codes. The type
should be int and not u8.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
"goto err;" has it's own kfree_skb() call so it's a double free. We
only need to free on the "goto exit;" path.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Currently trace_handle_return() looks like this:
static inline enum print_line_t trace_handle_return(struct trace_seq *s)
{
return trace_seq_has_overflowed(s) ?
TRACE_TYPE_PARTIAL_LINE : TRACE_TYPE_HANDLED;
}
Where trace_seq_overflowed(s) is:
static inline bool trace_seq_has_overflowed(struct trace_seq *s)
{
return s->full || seq_buf_has_overflowed(&s->seq);
}
And seq_buf_has_overflowed(&s->seq) is:
static inline bool
seq_buf_has_overflowed(struct seq_buf *s)
{
return s->len > s->size;
}
Making trace_handle_return() into:
return (s->full || (s->seq->len > s->seq->size)) ?
TRACE_TYPE_PARTIAL_LINE :
TRACE_TYPE_HANDLED;
One would think this is not an issue to keep as an inline. But because this
is used in the TRACE_EVENT() macro, it is extended for every tracepoint in
the system. Taking a look at a single tracepoint x86_irq_vector (was the
first one I randomly chosen). As trace_handle_return is used in the
TRACE_EVENT() macro of trace_raw_output_##call() we disassemble
trace_raw_output_x86_irq_vector and do a diff:
- is the original
+ is the out-of-line code
I removed identical lines that were different just due to different
addresses.
--- /tmp/irq-vec-orig 2017-03-16 09:12:48.569384851 -0400
+++ /tmp/irq-vec-ool 2017-03-16 09:13:39.378153385 -0400
@@ -6,27 +6,23 @@
53 push %rbx
48 89 fb mov %rdi,%rbx
4c 8b a7 c0 20 00 00 mov 0x20c0(%rdi),%r12
e8 f7 72 13 00 callq ffffffff81155c80 <trace_raw_output_prep>
83 f8 01 cmp $0x1,%eax
74 05 je ffffffff8101e993 <trace_raw_output_x86_irq_vector+0x23>
5b pop %rbx
41 5c pop %r12
5d pop %rbp
c3 retq
41 8b 54 24 08 mov 0x8(%r12),%edx
- 48 8d bb 98 10 00 00 lea 0x1098(%rbx),%rdi
+ 48 81 c3 98 10 00 00 add $0x1098,%rbx
- 48 c7 c6 7b 8a a0 81 mov $0xffffffff81a08a7b,%rsi
+ 48 c7 c6 ab 8a a0 81 mov $0xffffffff81a08aab,%rsi
- e8 c5 85 13 00 callq ffffffff81156f70 <trace_seq_printf>
=== here's the start of the main difference ===
+ 48 89 df mov %rbx,%rdi
+ e8 62 7e 13 00 callq ffffffff81156810 <trace_seq_printf>
- 8b 93 b8 20 00 00 mov 0x20b8(%rbx),%edx
- 31 c0 xor %eax,%eax
- 85 d2 test %edx,%edx
- 75 11 jne ffffffff8101e9c8 <trace_raw_output_x86_irq_vector+0x58>
- 48 8b 83 a8 20 00 00 mov 0x20a8(%rbx),%rax
- 48 39 83 a0 20 00 00 cmp %rax,0x20a0(%rbx)
- 0f 93 c0 setae %al
+ 48 89 df mov %rbx,%rdi
+ e8 4a c5 12 00 callq ffffffff8114af00 <trace_handle_return>
5b pop %rbx
- 0f b6 c0 movzbl %al,%eax
=== end ===
41 5c pop %r12
5d pop %rbp
c3 retq
If you notice, the original has 22 bytes of text more than the out of line
version. As this is for every TRACE_EVENT() defined in the system, this can
become quite large.
text data bss dec hex filename
8690305 5450490 1298432 15439227 eb957b vmlinux-orig
8681725 5450490 1298432 15430647 eb73f7 vmlinux-handle
This change has a total of 8580 bytes in savings.
$ objdump -dr /tmp/vmlinux-orig | grep '^[0-9a-f]* <trace_raw_output' | wc -l
324
That's 324 tracepoints. But this does not include modules (which contain
many more tracepoints). For an allyesconfig build:
$ objdump -dr vmlinux-allyes-orig | grep '^[0-9a-f]* <trace_raw_output' | wc -l
1401
That's 1401 tracepoints giving us:
text data bss dec hex filename
137920629 140221067 53264384 331406080 13c0db00 vmlinux-allyes-orig
137827709 140221067 53264384 331313160 13bf7008 vmlinux-allyes-handle
92920 bytes in savings!!!
Link: http://lkml.kernel.org/r/20170315021431.13107-2-andi@firstfloor.org
Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Adding a hook into free_reserve_area() that informs ftrace that boot up init
text is being free, lets ftrace safely remove those init functions from its
records, which keeps ftrace from trying to modify text that no longer
exists.
Note, this still does not allow for tracing .init text of modules, as
modules require different work for freeing its init code.
Link: http://lkml.kernel.org/r/1488502497.7212.24.camel@linux.intel.com
Cc: linux-mm@kvack.org
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Requested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Register the function tracer right after the tracing buffers are initialized
in early boot up. This will allow function tracing to begin early if it is
enabled via the kernel command line.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
As tracing can now be enabled very early in boot up, even before some
critical system services (like scheduling), do not run the tracer selftests
until after early_initcall() is performed. If a tracer is registered before
such time, it is saved off in a list and the test is run when the system is
able to handle more diverse functions.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Removed the unused nreq and redundant index variables.
Moved hardcoded async and cq ring pages number to macro.
Reported-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Aditya Sarwade <asarwade@vmware.com>
Tested-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
bcm_sf2 does require the MDIO_BCM_UNIMAC driver which is now dependent
on OF_MDIO but also internally uses of_mdio.c provided routines which
are guarted with OF_MDIO.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 90eff9096c ("net: phy: Allow splitting MDIO bus/device support from PHYs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change basically codifies what I think was already the limitations on
the busy_poll and busy_read sysctl interfaces. We weren't checking the
lower bounds and as such could input negative values. The behavior when
that was used was dependent on the architecture. In order to prevent any
issues with that I am just disabling support for values less than 0 since
this way we don't have to worry about any odd behaviors.
By limiting the sysctl values this way it also makes it consistent with how
we handle the SO_BUSY_POLL socket option since the value appears to be
reported as a signed integer value and negative values are rejected.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Lebrun says:
====================
Performances improvement for IPv6 Segment Routing
This patch series improves the performances of IPv6 SR by optimizing skb head
reallocation and extending the use of dst_cache. The overall performances improve
by 35%.
Before patch series (SRH encap):
Result: OK: 7348320(c7347271+d1048) usec, 5000000 (1000byte,0frags)
680427pps 5443Mb/sec (5443416000bps) errors: 0
After patch series (SRH encap):
Result: OK: 4774543(c4774084+d459) usec, 5000000 (1000byte,0frags)
1047220pps 8377Mb/sec (8377760000bps) errors: 0
Baseline for plain IPv6 forwarding:
Result: OK: 4244144(c4243722+d422) usec, 5000000 (1000byte,0frags)
1178093pps 9424Mb/sec (9424744000bps) errors: 0
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We already use dst_cache in seg6_output, when handling locally generated
packets. We extend it in seg6_input, to also handle forwarded packets, and avoid
unnecessary fib lookups.
Performances for SRH encapsulation before the patch:
Result: OK: 5656067(c5655678+d388) usec, 5000000 (1000byte,0frags)
884006pps 7072Mb/sec (7072048000bps) errors: 0
Performances after the patch:
Result: OK: 4774543(c4774084+d459) usec, 5000000 (1000byte,0frags)
1047220pps 8377Mb/sec (8377760000bps) errors: 0
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
To insert or encapsulate a packet with an SRH, we need a large enough skb
headroom. Currently, we are using pskb_expand_head to inconditionally increase
the size of the headroom by the amount needed by the SRH (and IPv6 header).
If this reallocation is performed by another CPU than the one that initially
allocated the skb, then when the initial CPU kfree the skb, it will enter the
__slab_free slowpath, impacting performances.
This patch replaces pskb_expand_head with skb_cow_head, that will reallocate the
skb head only if the headroom is not large enough.
Performances for SRH encapsulation before the patch:
Result: OK: 7348320(c7347271+d1048) usec, 5000000 (1000byte,0frags)
680427pps 5443Mb/sec (5443416000bps) errors: 0
Performances after the patch:
Result: OK: 5656067(c5655678+d388) usec, 5000000 (1000byte,0frags)
884006pps 7072Mb/sec (7072048000bps) errors: 0
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use setup_deferrable_timer() instead of init_timer_deferrable() to
simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a filesystem is mounted on a nbd device and on a disconnect, because
of kill_bdev(), and resetting bdev size to zero, buffer_head mappings are
getting destroyed under mounted filesystem.
After a bdev size reset(i.e bdev->bd_inode->i_size = 0) on a disconnect,
followed by a sys_umount(),
generic_shutdown_super()->...
->__sync_blockdev()->...
-blkdev_writepages()->...
->do_invalidatepage()->...
-discard_buffer() is discarding superblock buffer_head assumed
to be in mapped state by ext4_commit_super().
[mlin: ported to 4.11-rc2]
Signed-off-by: Ratna Manoj Bolla <manoj.br@gmail.com
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We can't just set the timeout on the tagset, we have to set it on the
queue as it would have been setup already at this point.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We've been relying on the block layer to assume rq->errors being set
translates into -EIO. I noticed in testing that sometimes this isn't
true, and really there's not much of a reason to have a counter instead
of just using -EIO. So set it properly so we don't leak random numbers
to unsuspecting victims.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We can submit IO in a processes context, which means there can be
pending signals. This isn't a fatal error for NBD, but it does require
some finesse. If the signal happens before we transmit anything then we
are ok, just requeue the request and carry on. However if we've done a
partial transmit we can't allow anything else to be transmitted on this
socket until we transmit the remaining part of the request. Deal with
this by keeping track of how much we've sent for the current request,
and if we get an ERESTARTSYS during any part of our transmission save
the state of that request and requeue the IO. If anybody tries to
submit a request that isn't our pending request then requeue that
request until we are able to service the one that is pending.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently we return true in blk_mq_dispatch_rq_list() if we queued IO
successfully, but we really want to return whether or not the we made
progress. Progress includes if we got an error return. If we don't,
this can lead to a hang in blk_mq_sched_dispatch_requests() when a
driver is draining IO by returning BLK_MQ_QUEUE_ERROR instead of
manually ending the IO in error and return BLK_MQ_QUEUE_OK.
Tested-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
blkdev_issue_flush() is now always synchronous, and it no longer has a
flags argument. So remove the part of the comment about the WAIT flag.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block fixes from Jens Axboe:
"A few fixes for the current series that should go into -rc4. This
contains:
- a fix for a potential corruption of un-started requests from Ming.
- a blk-stat fix from Omar, ensuring we flush the stat batch before
checking nr_samples.
- a set of fixes from Sagi for the nvmeof family"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: don't complete un-started request in timeout handler
nvme-loop: handle cpu unplug when re-establishing the controller
nvme-rdma: handle cpu unplug when re-establishing the controller
nvmet-rdma: Fix a possible uninitialized variable dereference
nvmet: confirm sq percpu has scheduled and switched to atomic
nvme-loop: fix a possible use-after-free when destroying the admin queue
blk-stat: fix blk_stat_sum() if all samples are batched
reclaim path, tagged for stable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJY1QoTAAoJEEp/3jgCEfOLtnoH/0uj3Y2QUVHDo0Je9HkQhzVC
Mp2a/WzN1YO/wdYRdxs6LbVqMIukPJ5kKbKO3WIgpJZR9lxSM9k5Y0YC98YVBHuB
v1uuTPe60fmdJRYnoD4/SfwXiIiAF5/dzPp80SI4xQ9zN24dS1wBREkH2eXUeoKL
FCEoHUv7cJju1dGNbcGpv4MV75b0e+HHAxPuDG4fiUdT79Vp+wP7exx0lMkS9ub8
i5T1GU5gDDBR+SKhpqMIvNgR7s3zdInUs476tk6jz/o049BwybkLIuDhx0+x93/g
1Y1KXHYPCT3yZeL5kdJxM6Dul6wDYOsr2/wIPHzY0ym9RXqCEy/PFowJnL+7eWk=
=cTM6
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.11-rc4' of git://github.com/ceph/ceph-client
Pull ceph fix from Ilya Dryomov:
"A fix for a writeback deadlock caused by a GFP_KERNEL allocation on
the reclaim path, tagged for stable"
* tag 'ceph-for-4.11-rc4' of git://github.com/ceph/ceph-client:
libceph: force GFP_NOIO for socket allocations
- A couple of OMAP 4.11 regression fixes, including a boot regression for
SmartReflex, hypervisor mode in thumb2 mode, and reference counting of
device nodes
- A fix for cpu_idle on at91
- Minor DT fixes on across several platforms:
sunxi, bcm53xx, at91, nsp, ns2, ux500, omap
- A fix to correct an API change in the reset controllers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zKIg
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
- a couple of OMAP 4.11 regression fixes, including a boot regression
for SmartReflex, hypervisor mode in thumb2 mode, and reference
counting of device nodes
- a fix for cpu_idle on at91
- minor DT fixes on across several platforms: sunxi, bcm53xx, at91,
nsp, ns2, ux500, omap
- a fix to correct an API change in the reset controllers
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
arm64: dts: NS2: Add dma-coherent to relevant DT entries
reset: fix optional reset_control_get stubs to return NULL
ARM: sun8i: a23/a33: drop bl_en_pin GPIO pinmux in reference design DTSI
ARM: dts: sun7i: lamobo-r1: Fix CPU port RGMII settings
ARM: dts: NSP: GPIO reboot open-source
ARM: at91: pm: cpu_idle: switch DDR to power-down mode
ARM: dts: add the AB8500 clocks to the device tree
ARM: dts: imx6sx-udoo-neo: Fix reboot hang
ARM: sun8i: Fix the mali clock rate
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
ARM: dts: BCM5301X: Fix memory start address
ARM: dts: BCM5301X: Fix UARTs on bcm953012k
Revert "ARM: at91/dt: sama5d2: Use new compatible for ohci node"
ARM: OMAP2+: Release device node after it is no longer needed.
ARM: OMAP2+: Fix device node reference counts
ARM: OMAP2+: Remove legacy gpmc-nand.c
ARM: OMAP2+: gpmc-onenand: propagate error on initialization failure
ARM: dts: am335x-pcm953: Fix legacy wakeup source binding
ARM: omap2plus_defconfig: Enable INPUT_MOUSEDEV as loadable modules
ARM: dts: am57xx-idk: tpic2810 is on I2C bus, not SPI
...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJY1R3+AAoJELDendYovxMvw9sIAIGwXhdN9hh7vxIj8seVQyky
3Cr58C9kVfZfWSeZt8g/SEvswo45E64QprggoaMJZwMXVVltJhBhd2jnFkMgtTks
08gk1O3/bMxHd9lXfUBVNwuRpWLVn/r8i4D94j3mJvC6EX7BBZ/aR0Nmm7jRbL0t
RK6U1TpyKdVJmlZT7hwk+oQht56Ohfay+74Kh/Bww0YixjRB1xwedHHy5AHi9lRh
T8WXIFj8SRk7azhY42q383L1lbVzU1hIMLqQoLvsmtDTbFmliBJtvELWAduZJ99j
zUCr6QqJw2GgJ+YHGlI0XJVRbPA484B3ufl1AwQ6H2byeHq+ZxlUI1Bh7YHkLGc=
=3HTs
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.11b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Fixes for PM under Xen"
* tag 'for-linus-4.11b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/acpi: upload PM state from init-domain to Xen
xen/acpi: Replace hard coded "ACPI0007"
- Fix mapping of kernel image under certain kaslr offsets
- Hook up new statx syscall in asm-generic syscall table
- Update compat syscall table to match arch/arm/ (pkeys and statx)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJY1P3eAAoJELescNyEwWM0L50H/0grxwPzCW8onOPmpoKafeTA
dbbixNi1kc7m/kMiTEhw/+e7D03IXMNP7DsQzRjDCdUvQ28EiSl4+C3YVgDWknQi
YwmIxU9tEAJbj6UJDZoau2pZmW9AxT4vVEarTf0hIAK1q19dH9eU7Fldp0elVFKk
Vjt+xxrSki28GA33oEw3Ck5wzsiuOOC7+jKggOjXC7hzsl9yvHIuVJw1ydDwXByk
PMjmFZu4+j6gkLcNGtcPfyRjDmvxy/GrYRWIpBrt+39XspMdN3Jfp2cCtyXIpk5A
CZ8MZ2uqSWGHefpUJzvBPsYUgX6Ay550OmB8K5If7BXLhnGfOiTFaO+ImiVc2JI=
=C/x/
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There's a kaslr fix and then two patches to update our native and
compat syscall tables. Arnd asked that we take the addition of statx
to the asm-generic unistd.h via arm64, as he didn't have anything
queued in the asm-generic tree.
Summary:
- Fix mapping of kernel image under certain kaslr offsets
- Hook up new statx syscall in asm-generic syscall table
- Update compat syscall table to match arch/arm/ (pkeys and statx)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kaslr: Fix up the kernel image alignment
arm64: compat: Update compat syscalls
generic syscalls: Wire up statx syscall
We cannot select the option when SERIAL_8250 is not also set:
warning: (ARCH_GEMINI) selects SERIAL_OF_PLATFORM which has unmet direct dependencies (TTY && HAS_IOMEM && SERIAL_8250 && OF)
This removes the 'select' statement, requiring that users enable the
option manually. Alternatively, we could make it a conditional
'select SERIAL_OF_PLATFORM if SERIAL_8250' or also select a handful
of other symbols that it depends on.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull crypto fixes from Herbert Xu:
"This fixes regressions in the crypto ccp driver and the hwrng drivers
for amd and geode"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
hwrng: geode - Revert managed API changes
hwrng: amd - Revert managed API changes
crypto: ccp - Assign DMA commands to the channel's CCP
Jiri Pirko says:
====================
mlxsw: Query resources from firmware
Ido says:
Some parts of the driver already use the resource query mechanism, but
in other parts we still rely on hard coded values that may change over
time.
This patchset removes most of these remaining values and queries them
from the firmware instead.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
As explained in the previous patch, the cell size may change in future
devices, so query it from the firmware instead of hard coding it.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sizes and thresholds of the priority group (PG) buffers are
configured in cells, which represent a specific amount of bytes.
The cell size can vary in different devices, so it's better to query it
from the firmware than hard coding it.
Refactor the code dealing with this value into different functions, so
that it will be easier to make the conversion in the next patch.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of hard coding the size of the shared buffer in the driver,
query it from the firmware, as it may change in future devices.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently hard code the maximum number of ports in the driver, but
this may change in future devices, so query it from the firmware
instead.
Fallback to a maximum of 64 ports in case this number can't be queried.
This should only happen in SwitchX-2 for which this number is correct.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of hard coding the number of LPM trees in the driver, query it
from the firmware, as it may change in future devices.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When vmalloc_user is used to create memory that is supposed to be mmap'd
to user space, it is necessary for the mmap cookie (eg the offset) to be
aligned to SHMLBA.
This creates a situation where all virtual mappings of the same physical
page share the same virtual cache index and guarantees VIPT coherence.
Otherwise the cache is non-coherent and the kernel will not see writes
by userspace when reading the shared page (or vice-versa).
Reported-by: Josh Beavers <josh.beavers@gmail.com>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2017-03-23
This series contains updates to i40e and i40e.txt documentation.
Jake provides all the changes in the series which are centered around
ntuple filter fixes and additional support. Fixed the current
implementation of .set_rxnfc, where we were not reading the mask field
for filter entries which was resulting in filters not behaving as
expected and not working correctly. When cleaning up after disabling
flow director support, ensure that the default input set is correctly
reprogrammed. Since the hardware only supports a single input set for
all flows of that type, the driver shall only allow the input set to
change if there are no other configured filters for that flow type, so
add support to detect when we can update the input set for each flow
type. Align the driver to other drivers to partition the ring_cookie
value into 8bits of VF index, along with 32bits of queue number instead
of using the user-def field. Added support to parse the user-def field
into a data structure format to allow future extensions of the user-def
filed by keeping all the code that read/writes the field into a single
location. Added support for flexible payloads passed via ethtool
user-def field. We support a single flexible word (2byte) value per
protocol type, and we handle the FLX_PIT register using a list of
flexible entries so that each flow type may be configured separately.
Enabled flow director filters for SCTPv4 packets using the ethtool
ntuple interface to enable filters. Updated the documentation on the
i40e driver to include the newly added support to ntuple filters.
Reduced complexity of a if-continue-else-break section of code by
taking advantage of using hlist_for_each_entry_continue() instead.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 7e54d9d063.
After additional regression testing, several users are experiencing
kernel panics during shutdown on e1000e devices. Reverting this
change resolves the issue.
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A few fixes piled up:
* Fix a NULL-ptr dereference that happens in VT-d on some
platforms
* A fix for ARM MSI region reporting, so that a sane interface
makes it to a released kernel
* Fixes for leaf-checking in ARM io-page-table code
* Two fixes for IO/TLB flushing code on ARM Exynos platforms
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=EcLT
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v4.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"A few fixes piled up:
- fix a NULL-ptr dereference that happens in VT-d on some platforms
- a fix for ARM MSI region reporting, so that a sane interface makes
it to a released kernel
- fixes for leaf-checking in ARM io-page-table code
- two fixes for IO/TLB flushing code on ARM Exynos platforms"
* tag 'iommu-fixes-v4.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: Disambiguate MSI region types
iommu/exynos: Workaround FLPD cache flush issues for SYSMMU v5
iommu/exynos: Block SYSMMU while invalidating FLPD cache
iommu/vt-d: Fix NULL pointer dereference in device_to_iommu
iommu/io-pgtable-arm-v7s: Check for leaf entry before dereferencing it
iommu/io-pgtable-arm: Check for leaf entry before dereferencing it
We need to make sure that the cq work item does not
run when we are destroying the cq. Unlike flush_work,
cancel_work_sync protects against self-requeue of the
work item (which we can do in ib_cq_poll_work).
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>--
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Fix initialization of HS400-ES eMMC cards
- A couple of fixes for the mmc block device driver
- Resolved a compiler warning
MMC host:
- sdhci: Do not disable IRQs while waiting for clock
- sdhci-pci: Do not disable IRQs in sdhci_intel_set_power
- sdhci-of-arasan: Fix incorrect timeout clock
- mediatek: Fix bug for setting wrong clock frequency
- sdhci-of-at91: Use regulator to fix cmd timeout errors
- ushc: Fix NULL-deref at probe
- rockchip-dw-mshc: Rename RK1108 to RV1108 in DT
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=AB+h
-----END PGP SIGNATURE-----
Merge tag 'mmc-v4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull mmc fixes from Ulf Hansson:
"Here are a couple of mmc fixes intended for v4.11 rc4.
MMC core:
- Fix initialization of HS400-ES eMMC cards
- A couple of fixes for the mmc block device driver
- Resolved a compiler warning
MMC host:
- sdhci: Do not disable IRQs while waiting for clock
- sdhci-pci: Do not disable IRQs in sdhci_intel_set_power
- sdhci-of-arasan: Fix incorrect timeout clock
- mediatek: Fix bug for setting wrong clock frequency
- sdhci-of-at91: Use regulator to fix cmd timeout errors
- ushc: Fix NULL-deref at probe
- rockchip-dw-mshc: Rename RK1108 to RV1108 in DT"
* tag 'mmc-v4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci: Do not disable interrupts in sdhci_intel_set_power
mmc: sdhci: Do not disable interrupts while waiting for clock
mmc: ushc: fix NULL-deref at probe
mmc: sdhci-of-at91: Support external regulators
mmc: core: mmc_blk_rw_cmd_err - remove unused variable
mmc: mediatek: Fixed bug where clock frequency could be set wrong
mmc: block: Fix cmd error reset failure path
mmc: block: Fix is_waiting_last_req set incorrectly
mmc: core: Fix access to HS400-ES devices
mmc: sdhci-of-arasan: fix incorrect timeout clock
dt-bindings: rockchip-dw-mshc: rename RK1108 to RV1108
MotherBoard section has its "ranges" set to 0xE000_0000-0xF000_0000.
But UIO node maps 4 different areas in different memory locations
and all outside MB's ranges.
That obviously breaks UIO mappings in runtime.
Cc: Ruud Derwig <rderwig@synopsys.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-----BEGIN PGP SIGNATURE-----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=xT1A
-----END PGP SIGNATURE-----
Merge tag 'media/v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- dvb-usb-firmware: don't do DMA on stack
- coda/imx-vdoa: platform_driver should not be const
- bdisp: Clean up file handle in open() error path
- exynos-gsc: Do not swap cb/cr for semi planar formats
* tag 'media/v4.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] exynos-gsc: Do not swap cb/cr for semi planar formats
[media] bdisp: Clean up file handle in open() error path
[media] coda/imx-vdoa: platform_driver should not be const
[media] dvb-usb-firmware: don't do DMA on stack
Fix copy and paste error setting rt_ttl_propagate.
Fixes: 5b441ac878 ("mpls: allow TTL propagation to IP packets to be configured")
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Acked-by: Robert Shearman <rshearma@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Because sysctl_tcp_adv_win_scale could be changed any time, so there
is one race in tcp_win_from_space.
For example,
1.sysctl_tcp_adv_win_scale<=0 (sysctl_tcp_adv_win_scale is negative now)
2.space>>(-sysctl_tcp_adv_win_scale) (sysctl_tcp_adv_win_scale is postive now)
As a result, tcp_win_from_space returns 0. It is unexpected.
Certainly if the compiler put the sysctl_tcp_adv_win_scale into one
register firstly, then use the register directly, it would be ok.
But we could not depend on the compiler behavior.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Converting IPv4 address doesn't need 64-bit arithmetic.
Space savings: 10 bytes!
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-10 (-10)
function old new delta
in_aton 96 86 -10
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>