Just a single fix to use standard and generic nodes names for SCMI
power domain controller and clock controller devicetree nodes.
-----BEGIN PGP SIGNATURE-----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=36FY
-----END PGP SIGNATURE-----
Merge tag 'juno-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt
ARMv8 Juno fix for v5.14
Just a single fix to use standard and generic nodes names for SCMI
power domain controller and clock controller devicetree nodes.
* tag 'juno-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Update SCPI nodes as per the YAML schema
Link: https://lore.kernel.org/r/20210611075805.2813712-1-sudeep.holla@arm.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix interrupt cells, GPIO controller node names in accordance
with new YAML schemas.
- Add proper compatible strings for Broadcomm Wifi and BT.
- Fix upp and add some mount matrices for accelerometers so
e.g. UI:s work as they should.
- Drop the DRDY pin assignment for a non-existing pin on a
magnetometer.
-----BEGIN PGP SIGNATURE-----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=Yyrj
-----END PGP SIGNATURE-----
Merge tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Some Ux500 DTS updates for v5.14:
- Fix interrupt cells, GPIO controller node names in accordance
with new YAML schemas.
- Add proper compatible strings for Broadcomm Wifi and BT.
- Fix upp and add some mount matrices for accelerometers so
e.g. UI:s work as they should.
- Drop the DRDY pin assignment for a non-existing pin on a
magnetometer.
* tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Fix orientation of Janice accelerometer
ARM: dts: href: Mount matrices for TVK R2
ARM: dts: ux500: Fix some compatible strings
ARM: dts: ux500: Drop drdy pin assignment from magnetometer
ARM: dts: ux500: Fix orientation of accelerometer
ARM: dts: ux500: Rename gpio-controller node
ARM: dts: ux500: Fix interrupt cells
Link: https://lore.kernel.org/r/CACRpkdYh9kZJU6PAxghPRGBco_61wRZgUnTZr_3qvySPCo5rBw@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
please pull the following:
- Zhen fixes the Broadcom stingray serial node unit names to fix a DT
binding warning
-----BEGIN PGP SIGNATURE-----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=6wtT
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.14/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoCs changes for 5.14,
please pull the following:
- Zhen fixes the Broadcom stingray serial node unit names to fix a DT
binding warning
* tag 'arm-soc/for-5.14/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: normalize the node name of the UART devices
Link: https://lore.kernel.org/r/20210610194836.309869-2-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
for 5.14, please pull the following:
- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
files to resolve a number of DT binding check warnings pertaining to
NAND, pinmux, clocks, SPI
- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
causing regressions on the Raspberry Pi 4B
- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
off that variant properly
- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
re-organization work and finally adding the DTS file proper
-----BEGIN PGP SIGNATURE-----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=ZmMv
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.14, please pull the following:
- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
files to resolve a number of DT binding check warnings pertaining to
NAND, pinmux, clocks, SPI
- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
causing regressions on the Raspberry Pi 4B
- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
off that variant properly
- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
re-organization work and finally adding the DTS file proper
* tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Add reference to RPi 400
ARM: dts: Add Raspberry Pi 400 support
ARM: dts: bcm283x: Fix up GPIO LED node names
dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
ARM: dts: Move BCM2711 RPi specific into separate dtsi
ARM: dts: bcm283x: Fix up MMC node names
ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible
Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"
ARM: dts: BCM5301X: Fixup SPI binding
dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema
ARM: dts: BCM5301X: Fix pinmux subnodes names
ARM: dts: Hurricane 2: Fix NAND nodes names
ARM: dts: BCM63xx: Fix NAND nodes names
ARM: NSP: dts: fix NAND nodes names
ARM: Cygnus: dts: fix NAND nodes names
ARM: brcmstb: dts: fix NAND nodes names
ARM: dts: BCM5301X: Fix NAND nodes names
Link: https://lore.kernel.org/r/20210610194836.309869-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Highlights:
-----------
MCU part:
- Fixes for Yaml verifications
MPU part:
- Configure qspi's mdma transfer to block for stm32mp151
- ST boards:
- Fixes for yaml verifications
- DH boards:
- Fixes for yaml verifications
- Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.
- Odyssey boards:
- fix Sd card detectection (gpio line updated)
- fix eMMC VQMMC suuply (use vdd instead of v3v3)
-----BEGIN PGP SIGNATURE-----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=RUQs
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.14, round 1
Highlights:
-----------
MCU part:
- Fixes for Yaml verifications
MPU part:
- Configure qspi's mdma transfer to block for stm32mp151
- ST boards:
- Fixes for yaml verifications
- DH boards:
- Fixes for yaml verifications
- Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.
- Odyssey boards:
- fix Sd card detectection (gpio line updated)
- fix eMMC VQMMC suuply (use vdd instead of v3v3)
* tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: fix stpmic node for stm32mp1 boards
ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM
ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM
ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM
ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply
ARM: dts: stm32: add a new DCMI pins group on stm32mp15
ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
dt-bindings: net: document ptp_ref clk in dwmac
ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings
ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
ARM: dts: stm32: fix RCC node name on stm32f429 MCU
ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin
ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151
ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2
ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2
ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM
Link: https://lore.kernel.org/r/e4bfb255-63fb-74a8-d591-eb09821c93ee@foss.st.com
Signed-off-by: Olof Johansson <olof@lixom.net>
1. Several cleanups and alignment with dtschema. This includes removal
of unused properties and fixing LED brightness property.
2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for
example from Suspend to RAM where the PMIC RTC's power is still
supplied).
3. Disable unused/not implemented camera on GT-I9100.
-----BEGIN PGP SIGNATURE-----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=8yS0
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.14
1. Several cleanups and alignment with dtschema. This includes removal
of unused properties and fixing LED brightness property.
2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for
example from Suspend to RAM where the PMIC RTC's power is still
supplied).
3. Disable unused/not implemented camera on GT-I9100.
* tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Disable unused camera input for I9100
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU3/XU4 family
ARM: dts: exynos: enable PMIC wakeup from suspend on SMDK5420
ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale Octa
ARM: dts: exynos: enable PMIC wakeup from suspend on P4 Note
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid X/U3
ARM: dts: exynos: enable PMIC wakeup from suspend on Midas
ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU
ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale
ARM: dts: exynos: enable PMIC wakeup from suspend on Origen4412
ARM: dts: exynos: enable PMIC wakeup from suspend on Itop Core
ARM: dts: s5pv210: remove unused Atmel touchscreen properties in Goni
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4
ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1
ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3
ARM: dts: exynos: replace legacy MMS114 touchscreen x/y properties in GT-N7100
ARM: dts: exynos: align Broadcom WiFi with dtschema
Link: https://lore.kernel.org/r/20210610074055.12474-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- IBM Rainier and Everest LED descriptions. These systems have a large
number of LEDs attached via expanders.
- Ampere Mt Jade updates, as OpenBMC bringup continues for this
machine.
- Updated 64MB flash layout for systems using OpenBMC on NOR root file
systems.
- Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
so a new device tree is added to support A0 and A1.
- Update all command lines for early serial output.
-----BEGIN PGP SIGNATURE-----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=UxVn
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt
ASPEED device tree updates for 5.14
- IBM Rainier and Everest LED descriptions. These systems have a large
number of LEDs attached via expanders.
- Ampere Mt Jade updates, as OpenBMC bringup continues for this
machine.
- Updated 64MB flash layout for systems using OpenBMC on NOR root file
systems.
- Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
so a new device tree is added to support A0 and A1.
- Update all command lines for early serial output.
* tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
ARM: dts: aspeed: everest: Add pcie cable card indicator leds
ARM: dts: aspeed: everest: Add vrm and other indicator leds
ARM: dts: aspeed: everest: Add dimm indicator leds
ARM: dts: aspeed: everest: Add pcie slot indicator leds
ARM: dts: aspeed: everest: Add nvme and fan indicator leds
ARM: dts: aspeed: everest: Add system level indicator leds
ARM: dts: aspeed-g5: Add SCU phandle to GFX node
ARM: dts: aspeed: Everest: Add directly controlled LEDs
ARM: dts: aspeed: Rainier 4U: Remove fan updates
ARM: dts: aspeed: Everest: Fix cable card PCA chips
ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout
ARM: dts: aspeed: mtjade: switch to 64MB flash layout
ARM: dts: aspeed: mtjade: Add PSU support
ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
ARM: dts: aspeed: Set earlycon boot argument
ARM: dts: aspeed-g6: Add pinctrl settings
ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0
ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.
Link: https://lore.kernel.org/r/CACPK8XduV9F=piu1qh56g+YNOZOBYTW7b2Y=XVYafpYDwWmDYA@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Mostly just clean-up for device tree binding checks with
few other clean-up patches:
- Drop ov5640 sensor for dra76-evm, it's just one of the
optional additional sensors and makes hard to use any of
the other options, TI is using the devicetree overlay
snippets for these
- Group the phandles in osd3358-sm-red to make the files
more readable
- A series of gpio clean-up patches to follow the binding
documentation
- Move ti,no-reset related properties to the target module
level, the ti-sysc driver handles them also in the child
but they really belong to the target module
- Drop the unnecessary uart compatible entries to make the
binding check to work
- Mailbox related updates to make the binding check to
work
-----BEGIN PGP SIGNATURE-----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=5lho
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps for v5.14 merge window
Mostly just clean-up for device tree binding checks with
few other clean-up patches:
- Drop ov5640 sensor for dra76-evm, it's just one of the
optional additional sensors and makes hard to use any of
the other options, TI is using the devicetree overlay
snippets for these
- Group the phandles in osd3358-sm-red to make the files
more readable
- A series of gpio clean-up patches to follow the binding
documentation
- Move ti,no-reset related properties to the target module
level, the ti-sysc driver handles them also in the child
but they really belong to the target module
- Drop the unnecessary uart compatible entries to make the
binding check to work
- Mailbox related updates to make the binding check to
work
* tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node
ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes
ARM: dts: OMAP2420: Drop interrupt-names from mailbox node
ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes
ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes
ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
ARM: dts: omap5-board-common: align gpio hog names with dt-schema
ARM: dts: omap3: align gpio hog names with dt-schema
ARM: dts: am437x: align gpio hog names with dt-schema
ARM: dts: am335x: align GPIO hog names with dt-schema
ARM: dts: osd3358-sm-red: group in the same phandle all its properties
ARM: dts: dra76-evm: remove ov5640
Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
- GPIO extender support for the Falcon development board,
- Switches support for the ALT development board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYLCiTgAKCRCKwlD9ZEnx
cNB6AP40CBtMLlW/h/DGCvm3iW8bRwHrBiuXeYrcHeJh1DoXFQEA3foLN4s5FZIQ
ZXFFOAgGVMHQft1o0qL0nO0ytw7zhg8=
=YIvB
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.14
- GPIO extender support for the Falcon development board,
- Switches support for the ALT development board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: alt: Add SW2 as GPIO keys
ARM: dts: renesas: Move enable-method to CPU nodes
arm64: dts: renesas: beacon: Fix USB ref clock references
arm64: dts: renesas: beacon: Fix USB extal reference
ARM: dts: rcar-gen1: Correct internal delay for i2c[123]
arm64: dts: renesas: eagle: Add x1 clock
ARM: dts: koelsch: Rename sw2 to keyboard
ARM: dts: r8a7779, marzen: Fix DU clock names
arm64: dts: renesas: v3msk: Fix memory size
arm64: dts: renesas: condor: Switch eMMC bus to 1V8
arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders
arm64: dts: renesas: beacon kit: Setup AVB refclk
arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list
ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list
Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
- MAINTAINERS fix for the DTS files
- Drop a duplicate ethernet node on the RUT1xx DTS
- Add device_type to the PCI node
- Fix up some DTS syntax so it agrees with the schemas merged
for the v5.14 merge window
-----BEGIN PGP SIGNATURE-----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=/Twf
-----END PGP SIGNATURE-----
Merge tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Gemini device tree updates for the v5.14 kernel:
- MAINTAINERS fix for the DTS files
- Drop a duplicate ethernet node on the RUT1xx DTS
- Add device_type to the PCI node
- Fix up some DTS syntax so it agrees with the schemas merged
for the v5.14 merge window
* tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: gemini: remove xxx-cells from display
ARM: dts: gemini-dlink-dir-685: Remove address from display port
ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c
ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c
ARM: dts: gemini: convert obsolete SPI properties
ARM: dts: gemini: use the right rtc compatible
ARM: dts: gemini: add device_type on pci
ARM: dts: gemini-rut1xx: remove duplicate ethernet node
ARM: dts: gemini: rename mdio to the right name
MAINTAINERS: gemini: add missing dts pattern
Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add ethernet to the boards
- Add PCI hosts to the boards
- Create an expansion bus around the flash memory
- Add the beeper to NSLU2 completing the NSLU2 DTS
-----BEGIN PGP SIGNATURE-----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=W/eR
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
IXP4xx DTS updates for the v5.14 kernel:
- Add ethernet to the boards
- Add PCI hosts to the boards
- Create an expansion bus around the flash memory
- Add the beeper to NSLU2 completing the NSLU2 DTS
* tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Fix up the IXP4xx ethernet nodes
ARM: dts: ixp4xx: Add beeper to the NSLU2
ARM: dts: ixp4xx: Create a proper expansion bus
ARM: dts: ixp4xx: Add PCI hosts
ARM: dts: ixp4xx: Add ethernet
Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
On some STM32 MP15 boards, stpmic node is not correct which generates
warnings running "make dtbs_check W=1" command. Issues are:
-"regulator-active-discharge" is not a boolean but an uint32.
-"regulator-over-current-protection" is not a valid entry for vref_ddr.
-LDO4 has a fixed voltage (3v3) so min/max entries are not allowed.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fix the following dtbs_check warning:
spi-flash@0: $nodename:0: 'spi-flash@0' does not match '^flash(@.*)?$'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fix the following dtbs_check warning:
eth@1,0: $nodename:0: 'eth@1,0' does not match '^ethernet(@.*)?$'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fix the following dtbs_check warning:
touchscreen@38: 'linux,wakeup' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: kernel@dh-electronics.com
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The Seeed SoM-STM32MP157C device tree had the eMMC’s (SDMMC2) VQMMC
supply set to v3v3 (buck4), the same as the VMMC supply. That was
incorrect, as on the SoM, the VQMMC supply is provided from vdd (buck3)
instead.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add initial DTSI for RZ/G2{L,LC} SoC's.
File structure:
r9a07g044.dtsi => RZ/G2L family SoC common parts
r9a07g044l1.dtsi => RZ/G2L R9A07G044L1 SoC specific parts
r9a07g044l2.dtsi => RZ/G2L R9A07G044L2 SoC specific parts
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210609153230.6967-11-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Clock definitions for the Renesas RZ/G2L (R9A07G044) SoC, shared by
driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYMIU6AAKCRCKwlD9ZEnx
cLTzAQDCHXUk8nXxbehYjdcDP7X3xEVh5OeZwSAKbwxKQvWtoQEAnlOysnT1LF0m
iNERFlisNuaR2hKXseifgf/7EIHRZQU=
=YzeJ
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a07g044-dt-binding-defs-tag' into renesas-arm-dt-for-v5.14
Renesas RZ/G2L DT Binding Definitions
Clock definitions for the Renesas RZ/G2L (R9A07G044) SoC, shared by
driver and DT source files.
The Seeed Odyssey-STM32MP157C board has a 20-pin DVP camera output.
stm32mp15-pinctrl.dtsi contained one pin state definition for the DCMI
interface, dcmi-0, AKA phandle dcmi_pins_a. This definition was
incompatible with the pins used on the Odyssey board, where:
- there are 8 data pins instead of 12,
- DCMI_HSYNC is available at PA4 instead of PH8,
- DCMI_D0 is at PC6 instead of PH9,
- DCMI_D3 is at PE1 instead of PH12,
- DCMI_D4 is at PE11 instead of PH14,
- DCMI_D5 is at PD3 instead of PI4,
- DCMI_D6 is at PE13 instead of PB8,
- DCMI_D7 is at PB9 instead of PE6.
Add the DCMI pins used on the Odyssey board as a new DCMI pin state
definition, dcmi-1, AKA phandle dcmi_pins_b.
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
It prevents the following warning:
pin-controller@50002000: 'ltdc' does not match any of the regexes:
'-[0-9]*$', '^gpio@[0-9a-f]*$', 'pinctrl-[0-9]+'
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
ptp_ref clk has been added in DT but not documented which makes yaml
validation failed:
ethernet@5800a000: clocks: [[6, 105], [6, 103], [6, 104], [6, 123],
[6, 169], [6, 112]] is too long
ethernet@5800a000: clock-names: ['stmmaceth', 'mac-clk-tx', 'mac-clk-rx',
'eth-ck', 'ptp_ref', 'ethstp'] is too long
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
It fixes the following warning seen running "make dtbs_check W=1"
Warning (simple_bus_reg): /soc/stmmac-axi-config: missing or empty
reg/ranges property
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Update node name to avoid a DT schema validation issue seen with
"make dtbs_check W=1". It also cleans picntrl dtsi files for f429/f469 MCU.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This adds a reference to the dts of the Raspberry Pi 400,
so we don't need to maintain the content in arm64.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Link: https://lore.kernel.org/r/1622981777-5023-8-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
The Raspberry Pi 400 is like a Pi 4 B designed into a keyboard. But there
are some minor differences:
- higher CPU clock rate (1.8 GHz)
- different Wifi chip (BCM43456)
- power off is now handled via GPIO
- no ACT LED
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-7-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
There is a lot of Raspberry Pi specific stuff (neither SoC or board
specific) for the BCM2711 which is currently in the RPi 4 B dts. In order
to avoid copy & paste for every new BCM2711 based Raspberry Pi, move it
into a separate dtsi.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-4-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
The BCM2711 has a slightly different VEC than the one found in the older
SoCs. Now that we support the new variant, add its compatible to the
device tree.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210520150344.273900-5-maxime@cerno.tech
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
This reverts commit 278407a53c.
The original change breaks USB config on Raspberry Pi Zero and Pi 4 B,
because it exceeds the total fifo size of 4080. A naive attempt to reduce
g-tx-fifo-size doesn't help on Raspberry Pi Zero. So better go back.
Fixes: 278407a53c ("ARM: dts: bcm283x: increase dwc2's RX FIFO size")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/1622293371-5997-1-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
"make dtbs_check":
arm64/boot/dts/renesas/r8a779a0-falcon.dt.yaml: interrupt-controller@f1000000: 'power-domains' does not match any of the regexes: '^(msi-controller|gic-its|interrupt-controller)@[0-9a-f]+$', '^gic-its@', '^interrupt-controller@[0-9a-f]+$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
Remove the "power-domains" property, as the GIC on R-Car V3U is
always-on, and not part of a clock domain.
Fixes: 834c310f54 ("arm64: dts: renesas: Add Renesas R8A779A0 SoC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/a9ae5cbc7c586bf2c6b18ddc665ad7051bd1d206.1622560236.git.geert+renesas@glider.be
These are leds on the IBM proprietary PCIE cards called cable cards.
Cable cards have 2 ports on them and each port has an indicator led.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-7-joel@jms.id.au
This commit adds indicator leds for vrms, processors, opencapi
connectors, tpm, planar, power distribution card and dasd
backplane and are driven by PIC16F882.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-6-joel@jms.id.au
These are the indicator leds for nvme slots and fans and are
driven by PCA9552.
Signed-off-by: Vishwanatha Subbanna <vishwa@linux.vnet.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210607031259.475020-3-joel@jms.id.au
