Commit graph

388,138 commits

Author SHA1 Message Date
Eric Bénard
4812e74616 ARM: mx28: add auart3 2 pins pinmux to imx28.dtsi
Add auart3 2 pins configuration on its main pads

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 15:43:28 +08:00
Eric Bénard
f8040cf597 ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi
Add auart2 2 pins configuration on its main pads

Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 15:43:28 +08:00
Fabio Estevam
2046338dcb ARM: mxs: Use soc bus infrastructure
Using the soc bus infrastructure is helpful for reporting several SoC related
information such as: family, machine, SoC name and SoC revision.

$ cat /sys/bus/soc/devices/soc0/family
Freescale MXS Family

$ cat /sys/bus/soc/devices/soc0/machine
Freescale i.MX28 Evaluation Kit

$ cat /sys/bus/soc/devices/soc0/soc_id
i.MX28

$ cat /sys/bus/soc/devices/soc0/revision
TO1.2

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 15:41:48 +08:00
Fabio Estevam
115581cfc9 ARM: dts: mx28: Adjust the digctl compatible string
MX28 has the same DIGCTL block as MX23, so adjust the compatible string to
reflect that.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 15:41:48 +08:00
Maxime Ripard
9250b07123 ARM: mxs: Remove init_irq declaration in machine description
Commit ebafed7a ("ARM: irq: Call irqchip_init if no init_irq function is
specified") removed the need to explictly setup the init_irq field in
the machine description when using only irqchip_init. Remove that
declaration for mxs as well.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-17 15:41:48 +08:00
Kuninori Morimoto
53332005bf ARM: shmobile: Remove Bonito board support
Remove board support for the r8a7740 based Bonito board

The r8a7740 SoC support code is still kept around since it
is in use by the Armadillo800eva board which is basically a more
recent board where the design is based on Bonito.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:31 +09:00
Magnus Damm
b24bd7e97b ARM: shmobile: Remove AP4EVB board support
Remove board support for the sh7372 based AP4EVB board

The sh7372 SoC support code is still kept around since it
is in use by the Mackerel board which is basically a more
recent board where the design is based on AP4EVB.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:31 +09:00
Magnus Damm
21ba05a6c2 ARM: shmobile: Remove mach/memory.h
Remove mach-shmobile memory.h since it is no longer needed.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:30 +09:00
Magnus Damm
3c2b1042d2 ARM: shmobile: Remove MEMORY_START/SIZE
Remove CONFIG_MEMORY_START and CONFIG_MEMORY_SIZE from mach-shmobile.

Boards should use DT to specify their memory setup. Boards that still
not support DT may pass ATAGS with memory information from the boot
loader. If those ATAGS turn out to be incorrect then appended DTB with
memory information should be used as a workaround.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:30 +09:00
Magnus Damm
6946999598 ARM: shmobile: Enable ARM_PATCH_PHYS_VIRT
Adjust mach-shmobile to add a select for CONFIG_ARM_PATCH_PHYS_VIRT
and at the same time remove NEED_MACH_MEMORY_H.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:29 +09:00
Magnus Damm
4f6da36f7e ARM: shmobile: Remove old SCU boot code
Remove shmobile_secondary_vector_scu now when all SCU enabled
SMP platforms instead make use of shmobile_boot_scu. This
removes two inline virtual to physical address conversions.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:29 +09:00
Magnus Damm
a188bfcafa ARM: shmobile: EMEV2 SMP with SCU boot fn and args
Let EMEV2 make use of shmobile_boot_fn and shmobile_boot_arg
together with shmobile_boot_scu and the SCU base address.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:28 +09:00
Magnus Damm
abfa04eb12 ARM: shmobile: sh73a0 SMP with SCU boot fn and args
Let sh73a0 make use of shmobile_boot_fn and shmobile_boot_arg
together with shmobile_boot_scu and the SCU base address.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:28 +09:00
Magnus Damm
af642310aa ARM: shmobile: r8a7779 SMP with SCU boot fn and args
Let r8a7779 make use of shmobile_boot_fn and shmobile_boot_arg
together with shmobile_boot_scu and the SCU base address.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:27 +09:00
Magnus Damm
bfabbcc679 ARM: shmobile: Add SCU boot function using argument
Add a shmoible_boot_scu function that assumes that the base address
of the SCU is passed in r0. This code is free from inline virtual
to physical address conversion.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:27 +09:00
Magnus Damm
ebe72ab90a ARM: shmobile: Add SMP boot function and argument
Add code for mach-shmobile to allow specifying boot function
and argument. Will initially be used for SMP together with SCU
but may in the future also be used for deep sleep resume. This
patch removes one inline virtual to physical address conversion.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:07:27 +09:00
Magnus Damm
e26f406740 ARM: shmobile: Rework sh7372 sleep code to use virt_to_phys()
Instead of having a hard coded virt-to-phys address
conversion code in sleep-sh7372.S, rework the code
to do the conversion in C using virt_to_phys().

This removes the need for PLAT_PHYS_OFFSET which
in turn is needed for ARCH_MULTIPLATFORM.

Signed-off-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: squashed in build fix posted as
 "ARM: shmobile: sh7372 build fix for SUSPEND=n && CPU_IDLE=n"]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 16:06:47 +09:00
Arnd Bergmann
ea4a21a298 gpio/omap: omap_gpio_init_context stub must be inline
The bug fix 352a2d5bf "gpio/omap: ensure gpio context is initialised"
has caused a new warning for omap1_defconfig:

drivers/gpio/gpio-omap.c:1465:13: warning: 'omap_gpio_init_context' defined but not used [-Wunused-function]
 static void omap_gpio_init_context(struct gpio_bank *p) {}
             ^

The solution is to mark the stub function as 'static inline' so
it gets left out of the build when unused.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 08:26:40 +02:00
Stephen Boyd
83bf2db916 gpio: msm-v1: Remove errant __devinit to fix compile
Commit 7bce696 (gpio: Make gpio-msm-v1 into a platform driver,
2013-03-04) was based on an older kernel where __devinit still
existed. Remove the erroneous __devinit marking.

Cc: David Brown <davidb@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 07:54:05 +02:00
Wolfram Sang
713b7ef835 gpio: devres: make comments proper
The free-function mentioned "interrupt" instead of "GPIO". While we are
here, use "GPIO" (capital letters) consistently.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 07:53:00 +02:00
Michal Simek
78c7d8d289 GPIO: xilinx: Enable driver for Xilinx zynq
Enable gpio driver for usage on Xilinx ARM zynq platform.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 07:51:55 +02:00
Michal Simek
6090a0fa5c DT: Add documentation for gpio-xilinx
Describe gpio-xilinx binding.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 07:48:42 +02:00
Michal Simek
9f7f0b2bbc GPIO: xilinx: Use BIT macro
Use BIT macro from linux/bitops.h.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 07:47:33 +02:00
Michal Simek
cc090d61d1 GPIO: xilinx: Use __raw_readl/__raw_writel IO functions
This driver can be used on Xilinx ARM Zynq platform
where in_be32/out_be32 functions are not implemented.
Use __raw_readl/__raw_writel functions which are
implemented on Microblaze and PowerPC.
For ARM readl/writel functions are used instead.

The correct way how to implement this is to detect
endians directly on IP. But for the gpio case
without interrupt connected(it means without
interrupt logic) there are just 2 registers
data and tristate where auto detection can't be done.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 07:46:18 +02:00
Michal Simek
74600ee017 GPIO: xilinx: Add support for dual channel
Supporting the second channel in the driver.
Offset is 0x8 and both channnels share the same
IRQ.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 07:42:30 +02:00
Michal Simek
6f8bf50031 GPIO: xilinx: Simplify driver probe function
Simplification is done by using OF helper function
which increase readability of code and remove
(if (var) var = be32_to_cpup;) assignment.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-17 07:38:50 +02:00
Michal Simek
88cd4e882d ARM: zynq: Not to rewrite jump code when starting address is 0x0
This configuration is used by remoteproc.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-06-17 07:35:31 +02:00
Guennadi Liakhovetski
0a6ea54ff0 pinctrl: r8a7790: fix two pin numbers
Fix two erroneous MMCIF1 pin numbers on r8a7790.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-17 11:20:52 +09:00
Tejun Heo
a4244454df percpu-refcount: use RCU-sched insted of normal RCU
percpu-refcount was incorrectly using preempt_disable/enable() for RCU
critical sections against call_rcu().  6a24474da8 ("percpu-refcount:
consistently use plain (non-sched) RCU") fixed it by converting the
preepmtion operations with rcu_read_[un]lock() citing that there isn't
any advantage in using sched-RCU over using the usual one; however,
rcu_read_[un]lock() for the preemptible RCU implementation -
CONFIG_TREE_PREEMPT_RCU, chosen when CONFIG_PREEMPT - are slightly
more expensive than preempt_disable/enable().

In a contrived microbench which repeats the followings,

 - percpu_ref_get()
 - copy 32 bytes of data into percpu buffer
 - percpu_put_get()
 - copy 32 bytes of data into percpu buffer

rcu_read_[un]lock() used in percpu_ref_get/put() makes it go slower by
about 15% when compared to using sched-RCU.

As the RCU critical sections are extremely short, using sched-RCU
shouldn't have any latency implications.  Convert to RCU-sched.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Kent Overstreet <koverstreet@google.com>
Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rusty Russell <rusty@rustcorp.com.au>
2013-06-16 16:12:26 -07:00
Maxime Ripard
d3ae078eb8 ARM: sunxi: dt: Add Allwinner A10s DTSI
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-06-16 20:50:16 +02:00
Maxime Ripard
81265dfb1c ARM: sunxi: Add Allwinner A10s machine compatible
The A10s is a SoC member of the Allwinner sun5i family. It is basically
an A13 with an EMAC and an HDMI controller.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-06-16 20:49:30 +02:00
Greg Kroah-Hartman
bad15f2c38 Third round of IIO new stuff, cleanups and staging graduations for the 3.11
cycle.
 
 1) Add clock consumer support and device tree bindings to adf4350.
    The clock consumer part depends on a not so optional 'optional'
    implementation of clock_round_rate which is not present for pxa27x.
    It will be shortly and as no one actually uses this chip with that
    sub arch as far as we know, no need to delay the inclusion in the
    meantime. See
    http://lkml.indiana.edu/hypermail/linux/kernel/1306.1/00023.html
    for the brief discussion.  This may be the first non soc specific driver
    that makes use of that function.
 
 2) AD7303 DAC new driver.
 
 3) ADIS16130 minor fixes and improvements plus move out of staging.
 
 4) AD7291 improvements to bring it inline with more recent drivers.
 
 5) Update to the sysfs ABI doc to fix some out of date paths.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.20 (GNU/Linux)
 
 iQIcBAABAgAGBQJRve0gAAoJEFSFNJnE9BaI1zwP/jLgKrp+9l1W9ZORDEm9YrPw
 BlnLhAIOgbeO2kZf6UEAo//0yYJ1C7fTGPfx65J9sFeIx5oiqH9/JKJkQKholX32
 uvrz/uPtPBUD8O3g4hc1fokRocHc0JR5jDzJUCkVq9Sbw5Ed9ufNAUWxZ44oFTHj
 6oGKJQG8Whhdh2S/E9NHspXxp70Fqg6v8CKG/dQ6hnrrBOHoL5QTJidsiZIXxJDy
 fRknSrp6KTcDJxOyUGzV/yVRLrXCvH97Op+oxpMZB4j1RVxKlQ8yjNMKaCO3yWnl
 WH2wVx1WytwbkfjwrJTxfHERNs0pPjcp7bA/C34FnPfgGA4dTv6TBYcSYQN3ZHzt
 W/Pdy28p/xptXNATNb27N9nRWXh+1fQnCdYECrB5d4K6JfG4eMo0q6r+HcFr96kO
 zc0zH7HtNBBR4CT0MKo5OWs7/srv7guI5gL5Hu6uMgRG+yrSRaRkDNQz9IEnIQyQ
 KWRFNpgnAIWNWmUpm0kWWShLFmLcI0uWz0g+6aGFnVc01HXFItLuhY959liiVxI8
 7DFBhXi/A2t9yE9q5qj74OL+L4fuYwSRxzDQbN98js8zqAWGNDS1XF4wRXAwOG8m
 5m8OhbYKNilEh7hsuIq5o67WVxbaE2XJzZgNVeL/GiAVtctprENdBdOT2XDOLc/a
 LiKQND/qJTNY39YIHBFI
 =MiTn
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-3.11c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Third round of IIO new stuff, cleanups and staging graduations for the 3.11
cycle.

1) Add clock consumer support and device tree bindings to adf4350.
   The clock consumer part depends on a not so optional 'optional'
   implementation of clock_round_rate which is not present for pxa27x.
   It will be shortly and as no one actually uses this chip with that
   sub arch as far as we know, no need to delay the inclusion in the
   meantime. See
   http://lkml.indiana.edu/hypermail/linux/kernel/1306.1/00023.html
   for the brief discussion.  This may be the first non soc specific driver
   that makes use of that function.

2) AD7303 DAC new driver.

3) ADIS16130 minor fixes and improvements plus move out of staging.

4) AD7291 improvements to bring it inline with more recent drivers.

5) Update to the sysfs ABI doc to fix some out of date paths.
2013-06-16 11:46:05 -07:00
Jay Agarwal
ff49fad1d9 ARM: tegra30: clocks: Fix pciex clock registration
Registering pciex as peripheral clock instead of fixed clock
as tegra_perih_reset_assert(deassert) api of this clock api
gives warning and ultimately does not succeed to assert(deassert)

Signed-off-by: Jay Agarwal <jagarwal@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-16 11:25:45 -07:00
Al Viro
8177a9d79c lseek(fd, n, SEEK_END) does *not* go to eof - n
When you copy some code, you are supposed to read it.  If nothing else,
there's a chance to spot and fix an obvious bug instead of sharing it...

X-Song: "I Got It From Agnes", by Tom Lehrer
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ Tom Lehrer? You're dating yourself, Al ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-16 08:10:53 -10:00
Jiang Liu
c805a5b7ca h8300: add missing definition for read_barries_depends()
Add missing definition for read_barries_depends() for h8300 to fix error:
kernel/task_work.c: In function 'task_work_cancel':
kernel/task_work.c:38:3: error: implicit declaration of function 'read_barrier_depends' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[1]: *** [kernel/task_work.o] Error 1
make: *** [kernel] Error 2

Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
2013-06-16 13:47:48 +02:00
Geert Uytterhoeven
c0b81e0036 frv: head.S - Remove commented-out initialization code
The commented-out calls to processor_init() and unit_init() seem to have
been copied from mn10300, when starting the frv port. Remove them.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:47 +02:00
Geert Uytterhoeven
e3ccbc3444 cris: Wire up asm-generic/vga.h
When compiling several DRM related files:

include/video/vga.h:22:21: fatal error: asm/vga.h: No such file or directory

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:45 +02:00
Geert Uytterhoeven
cb1ff5f90e parport: disable PC-style parallel port support on cris
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:44 +02:00
Geert Uytterhoeven
3535629264 console: Disable VGA text console support on cris
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:43 +02:00
Geert Uytterhoeven
acf836301e cris: Switch cris to drivers/Kconfig
allmodconfig:

drivers/video/console/fonts.c:71:2: error: #error No fonts configured.

This is caused by cris not using the generic drivers/Kconfig, and thus not
traversing drivers/video/console/Kconfig.
As the build system does traverse drivers/video/console/Makefile, fonts.c
was compiled with an inconsistent configuration.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:42 +02:00
Geert Uytterhoeven
cd07f4f3bb cris: Wire up asm-generic/xor.h
crypto/xor.c:25:21: fatal error: asm/xor.h: No such file or directory

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
2013-06-16 13:47:41 +02:00
Geert Uytterhoeven
decd48ccbe cris: Switch to asm-generic/linkage.h
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
2013-06-16 13:47:39 +02:00
Geert Uytterhoeven
0dad16fd4e cris: Provide inb_p() and outb_p()
drivers/block/hd.c: In function 'check_status':
drivers/block/hd.c:256:2: error: implicit declaration of function 'inb_p' [-Werror=implicit-function-declaration]
drivers/block/hd.c: In function 'controller_ready':
drivers/block/hd.c:297:3: error: implicit declaration of function 'outb_p' [-Werror=implicit-function-declaration]

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:38 +02:00
Geert Uytterhoeven
95f40de9df cris: Provide <asm/kvm_para.h>
In file included from include/linux/kvm_para.h:4:0,
                 from kernel/watchdog.c:28:
include/uapi/linux/kvm_para.h:26:26: fatal error: asm/kvm_para.h: No such file or directory

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:37 +02:00
Geert Uytterhoeven
6a89a9dba2 cris/kgdb: Remove sections protected by #ifdef PROCESS_SUPPORT
When enabled, it doesn't build anyway:

arch/cris/arch-v10/kernel/kgdb.c: In function 'copy_registers_from_stack':
arch/cris/arch-v10/kernel/kgdb.c:631:2: error: unknown type name 'stack_registers'
arch/cris/arch-v10/kernel/kgdb.c:631:24: error: 'stack_registers' undeclared (first use in this function)
arch/cris/arch-v10/kernel/kgdb.c:631:24: note: each undeclared identifier is reported only once for each function it appears in
arch/cris/arch-v10/kernel/kgdb.c:631:41: error: expected expression before ')' token
arch/cris/arch-v10/kernel/kgdb.c:635:11: error: request for member 'r' in something not a structure or union
arch/cris/arch-v10/kernel/kgdb.c:636:29: error: 'stack_list' undeclared (first use in this function)
arch/cris/arch-v10/kernel/kgdb.c:637:16: error: request for member 'pc' in something not a structure or union
arch/cris/arch-v10/kernel/kgdb.c:638:18: error: request for member 'dccr' in something not a structure or union
arch/cris/arch-v10/kernel/kgdb.c:639:17: error: request for member 'srp' in something not a structure or union
arch/cris/arch-v10/kernel/kgdb.c: In function 'copy_registers_to_stack':
arch/cris/arch-v10/kernel/kgdb.c:648:2: error: unknown type name 'stack_registers'
arch/cris/arch-v10/kernel/kgdb.c:648:24: error: 'stack_registers' undeclared (first use in this function)
arch/cris/arch-v10/kernel/kgdb.c:648:41: error: expected expression before ')' token
arch/cris/arch-v10/kernel/kgdb.c:652:4: error: request for member 'r' in something not a structure or union
arch/cris/arch-v10/kernel/kgdb.c:654:3: error: request for member 'pc' in something not a structure or union
arch/cris/arch-v10/kernel/kgdb.c:655:3: error: request for member 'dccr' in something not a structure or union
arch/cris/arch-v10/kernel/kgdb.c:656:3: error: request for member 'srp' in something not a structure or union
arch/cris/arch-v10/kernel/kgdb.c: In function 'write_stack_register':
arch/cris/arch-v10/kernel/kgdb.c:702:2: error: unknown type name 'stack_registers'
arch/cris/arch-v10/kernel/kgdb.c:702:24: error: 'stack_registers' undeclared (first use in this function)
arch/cris/arch-v10/kernel/kgdb.c:702:41: error: expected expression before ')' token
arch/cris/arch-v10/kernel/kgdb.c:707:4: error: request for member 'r' in something not a structure or union
arch/cris/arch-v10/kernel/kgdb.c:710:3: error: 'stack_list' undeclared (first use in this function)
arch/cris/arch-v10/kernel/kgdb.c:713:4: error: request for member 'pc' in something not a structure or union
arch/cris/arch-v10/kernel/kgdb.c:716:4: error: request for member 'srp' in something not a structure or union
arch/cris/arch-v10/kernel/kgdb.c:719:4: error: request for member 'dccr' in something not a structure or union
arch/cris/arch-v10/kernel/kgdb.c: In function 'stub_is_stopped':
arch/cris/arch-v10/kernel/kgdb.c:827:36: error: 'pos' undeclared (first use in this function)
arch/cris/arch-v10/kernel/kgdb.c: In function 'handle_exception':
arch/cris/arch-v10/kernel/kgdb.c:1064:40: error: 'number_of_tasks' undeclared (first use in this function)
arch/cris/arch-v10/kernel/kgdb.c:1125:8: error: implicit declaration of function 'os_is_started' [-Werror=implicit-function-declaration]

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:36 +02:00
Geert Uytterhoeven
de666cf0a6 cris/kgdb: Fix buffer overflow in getpacket()
arch/cris/arch-v10/kernel/kgdb.c: In function 'handle_exception':
arch/cris/arch-v10/kernel/kgdb.c:534:17: warning: array subscript is above array bounds [-Warray-bounds]

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:34 +02:00
Geert Uytterhoeven
e42e3980ad cris/kgdb: Remove obsolete USED*() macros
handle_exception and internal_stack are now global

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:33 +02:00
Geert Uytterhoeven
6408ac4997 cris/kgdb: Make symbols used from asm global
arch/cris/arch-v10/kernel/built-in.o: In function `kgdb_handle_breakpoint':
(.text+0x2c3e): undefined reference to `reg'
arch/cris/arch-v10/kernel/built-in.o: In function `kgdb_handle_breakpoint':
(.text+0x2c48): undefined reference to `reg'
arch/cris/arch-v10/kernel/built-in.o: In function `kgdb_handle_breakpoint':
(.text+0x2c50): undefined reference to `reg'
arch/cris/arch-v10/kernel/built-in.o: In function `kgdb_handle_breakpoint':
(.text+0x2c58): undefined reference to `reg'
arch/cris/arch-v10/kernel/built-in.o: In function `kgdb_handle_breakpoint':
(.text+0x2c60): undefined reference to `reg'
arch/cris/arch-v10/kernel/built-in.o:(.text+0x2c68): more undefined references to `reg' follow
arch/cris/arch-v10/kernel/built-in.o: In function `is_static':
kgdb.c:(.text+0x2d46): undefined reference to `internal_stack'
kgdb.c:(.text+0x2d4e): undefined reference to `handle_exception'
kgdb.c:(.text+0x2d54): undefined reference to `reg'
kgdb.c:(.text+0x2d5c): undefined reference to `reg'
kgdb.c:(.text+0x2d64): undefined reference to `reg'
kgdb.c:(.text+0x2d6c): undefined reference to `reg'
kgdb.c:(.text+0x2d74): undefined reference to `reg'
arch/cris/arch-v10/kernel/built-in.o:kgdb.c:(.text+0x2d7c): more undefined references to `reg' follow
arch/cris/arch-v10/kernel/built-in.o: In function `kgdb_handle_serial':
(.text+0x2ef6): undefined reference to `internal_stack'
arch/cris/arch-v10/kernel/built-in.o: In function `kgdb_handle_serial':
(.text+0x2efe): undefined reference to `handle_exception'
arch/cris/arch-v10/kernel/built-in.o: In function `goback':
kgdb.c:(.text+0x2f04): undefined reference to `reg'
kgdb.c:(.text+0x2f0c): undefined reference to `reg'
kgdb.c:(.text+0x2f14): undefined reference to `reg'
kgdb.c:(.text+0x2f1c): undefined reference to `reg'
kgdb.c:(.text+0x2f24): undefined reference to `reg'
arch/cris/arch-v10/kernel/built-in.o:kgdb.c:(.text+0x2f2c): more undefined references to `reg' follow

Make reg, internal_stack, and handle_exception global to fix this.
Rename reg to cris_reg as it's a too generic name for a global symbol.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:24 +02:00
Geert Uytterhoeven
d6c97e1ccb cris/kgdb: Use #ifdef PROCESS_SUPPORT where needed
arch/cris/arch-v10/kernel/kgdb.c:354:12: warning: 'current_thread_c' defined but not used [-Wunused-variable]
arch/cris/arch-v10/kernel/kgdb.c:355:12: warning: 'current_thread_g' defined but not used [-Wunused-variable]
arch/cris/arch-v10/kernel/kgdb.c:359:18: warning: 'reg_g' defined but not used [-Wunused-variable]
arch/cris/arch-v10/kernel/kgdb.c:622:1: warning: 'copy_registers' defined but not used [-Wunused-function]

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:23 +02:00
Geert Uytterhoeven
4bf01dda08 cris/kgdb: Kill forward declarations for static functions
Move some functions around and kill forward declarations for static
functions. This fixes:

arch/cris/arch-v10/kernel/kgdb.c:255:13: warning: 'copy_registers_from_stack' declared 'static' but never defined [-Wunused-function]
arch/cris/arch-v10/kernel/kgdb.c:259:13: warning: 'copy_registers_to_stack' declared 'static' but never defined [-Wunused-function]
arch/cris/arch-v10/kernel/kgdb.c:267:12: warning: 'write_stack_register' declared 'static' but never defined [-Wunused-function]

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:22 +02:00