Commit graph

388,138 commits

Author SHA1 Message Date
Geert Uytterhoeven
4bb77a9dfa cris/kgdb: Remove unused static int do_printk
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:20 +02:00
Geert Uytterhoeven
7fc6a8ba23 cris/kgdb: Properly split long lines in asm
arch/cris/arch-v10/kernel/kgdb.c:1273:6: warning: missing terminating " character [enabled by default]
arch/cris/arch-v10/kernel/kgdb.c:1359:1: warning: missing terminating " character [enabled by default]
arch/cris/arch-v10/kernel/kgdb.c:1370:6: warning: missing terminating " character [enabled by default]
arch/cris/arch-v10/kernel/kgdb.c:1457:1: warning: missing terminating " character [enabled by default]
arch/cris/arch-v10/kernel/kgdb.c:1273:6: warning: missing terminating " character [enabled by default]
arch/cris/arch-v10/kernel/kgdb.c:1273:1: error: missing terminating " character
arch/cris/arch-v10/kernel/kgdb.c:1274:3: error: expected string literal before '.' token
arch/cris/arch-v10/kernel/kgdb.c:1359:1: warning: missing terminating " character [enabled by default]
arch/cris/arch-v10/kernel/kgdb.c:1359:1: error: missing terminating " character
arch/cris/arch-v10/kernel/kgdb.c:1370:6: warning: missing terminating " character [enabled by default]
arch/cris/arch-v10/kernel/kgdb.c:1370:1: error: missing terminating " character
arch/cris/arch-v10/kernel/kgdb.c:1457:1: warning: missing terminating " character [enabled by default]
arch/cris/arch-v10/kernel/kgdb.c:1457:1: error: missing terminating " character

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2013-06-16 13:47:19 +02:00
Geert Uytterhoeven
7e973d79df c6x: Wire up asm-generic/xor.h
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Mark Salter <msalter@redhat.com>
Tested-by: Mark Salter <msalter@redhat.com>
2013-06-16 13:47:17 +02:00
Geert Uytterhoeven
b5cc489145 avr32: atmel_default_console_device depends on CONFIG_SERIAL_ATMEL
allnoconfig:

arch/avr32/mach-at32ap/built-in.o: In function `at32_select_gpio':
(.init.text+0x548): undefined reference to `atmel_default_console_device'

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
2013-06-16 13:47:16 +02:00
Doug Anderson
5ace03fb6a pinctrl: exynos: reorder xyz_irq_unmask() so future patch can ack
This patch does nothing but reorder the functions to improve the
readability of a future patch.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 12:01:55 +02:00
Doug Anderson
5ae8cf7980 pinctrl: exynos: Add spinlocks to irq_mask and irq_unmask
The patch:
  1984695 pinctrl: samsung: Protect bank registers with a spinlock

...added spinlocks to protect many accesses.  However, the irq_mask
and irq_unmask functions still do an unprotected read/modify/write.
Add the spinlock there.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Tomasz Figa <t.figa@samsung.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 12:01:54 +02:00
Patrice Chotard
ce06f40740 pinctrl: abx500: fix build warning
pinctrl-abx500.c: In function 'abx500_gpio_dbg_show_one':
pinctrl-abx500.c:534:14: warning: 'pud' may be used
uninitialized in this function [-Wuninitialized]

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:57:33 +02:00
Heiko Stübner
d3e5116119 pinctrl: add pinctrl driver for Rockchip SoCs
This driver adds support the Cortex-A9 based SoCs from Rockchip,
so at least the RK2928, RK3066 (a and b) and RK3188.
Earlier Rockchip SoCs seem to use similar mechanics for gpio
handling so should be supportable with relative small changes.
Pull handling on the rk3188 is currently a stub, due to it being
a bit different to the earlier SoCs.

Pinmuxing as well as gpio (and interrupt-) handling tested on
a rk3066a based machine.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:57:32 +02:00
Heiko Stübner
7db9af4b6e pinctrl: add function to parse generic pinconfig properties from a dt node
pinconf_generic_parse_dt_config() takes a node as input and generates an
array of generic pinconfig values from the properties of this node.

As I couldn't find a mechanism to count the number of properties of a node
the function uses internally an array to accept one of parameter and copies
the real present options to a smaller variable at its end.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:57:32 +02:00
Mugunthan V N
5c0e3580cb drivers: net: davinci_mdio: use pinctrl PM helpers
This utilize the new pinctrl core PM helpers to transition
the driver to "default" and "sleep" states.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:57:32 +02:00
Mugunthan V N
739683b48d drivers: net: cpsw: use pinctrl PM helpers
This utilize the new pinctrl core PM helpers to transition
the driver to "default" and "sleep" states.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:57:32 +02:00
Linus Walleij
f1c9cf074b spi: pl022: use pinctrl PM helpers
This utilize the new pinctrl core PM helpers to transition
the driver to "sleep" and "idle" states, cutting away some
boilerplate code.

Cc: Hebbar Gururaja <gururaja.hebbar@ti.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:57:32 +02:00
Maxime Ripard
7f884b6483 pinctrl: sunxi: Add external interrupt functions
The A10 and A13 has a few pins that can be muxed into a particular
function that can be used as an interrupt source. Add the available
pins for such functions to the A10 and A13 description array.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:57:32 +02:00
Maxime Ripard
60242db1a7 pinctrl: sunxi: Add external interrupts support
The port controller IP found in the Allwinner A10 and A13 can use few of
the pins it manage as an interrupt source, called external interrupts in
the datasheet.

The number of these external interrupts are SoCs specific, but the
current upper limit is 32. In order to work, the external interrupts'
pins have to be muxed to a specific function to generate an interrupt.

This patch adds the irqchip and the needed logic to use the PIO
controller as an interrupt controller.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:57:31 +02:00
Maxime Ripard
814d4f2e15 pinctrl: sunxi: Search the description array by pin id
Avoid to use expensive string manipulation functions and search by pin
id when possible.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:53 +02:00
Thomas Abraham
79bae27ff9 pinctrl: exynos5440: fix issues reported by prevent tool
This patch fixes issues reported by prevent tool.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
[Drop hunk already in-tree from a patch by Wei Yongjun]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:52 +02:00
Manjunathappa, Prakash
6f924b0b7c pinctrl: pinctrl-single: pin names for pinctrl-single.bits
Take care to name pin names as
register-offset.bit-pos-of-pin-in-register in case configuring multiple
pins in register.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:52 +02:00
Manjunathappa, Prakash
4e7e8017a8 pinctrl: pinctrl-single: enhance to configure multiple pins of different modules
Add support to configure multiple pins in each register, existing
implementation added by [1] does not support full fledge multiple pin
configuration in single register, reports a pin clash when different
modules configure different bits of same register. The issue reported
and discussed here
http://www.spinics.net/lists/arm-kernel/msg235213.html

With pinctrl-single,bits-per-mux property specified, use function-mask
property to find out number pins to configure. Allocate and register
pin control functions based sub mask.

Tested on da850/omap-l138 EVM.
does not support variable submask for pins.
does not support pinconf.

[1] "pinctrl: pinctrl-single: Add pinctrl-single,bits type of mux"
(9e605cb68a),

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Reported-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:52 +02:00
Linus Walleij
ac844b6271 i2c: nomadik: use pinctrl PM helpers
This utilize the new pinctrl core PM helpers to transition
the driver to "sleep" and "idle" states, cutting away some
boilerplate code.

Cc: Hebbar Gururaja <gururaja.hebbar@ti.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:52 +02:00
Linus Walleij
2b996fc500 tty: serial: modify PL011 driver to use pinctrl PM helpers
This augments the PL011 UART driver to utilize the new pinctrl
core PM helpers to transition the driver to default and sleep
states, cutting away some boilerplate code.

Cc: Hebbar Gururaja <gururaja.hebbar@ti.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:52 +02:00
Linus Walleij
14005ee270 drivers: pinctrl sleep and idle states in the core
If a device have sleep and idle states in addition to the
default state, look up these in the core and stash them in
the pinctrl state container.

Add accessor functions for pinctrl consumers to put the pins
into "default", "sleep" and "idle" states passing nothing but
the struct device * affected.

Solution suggested by Kevin Hilman, Mark Brown and Dmitry
Torokhov in response to a patch series from Hebbar
Gururaja.

Cc: Hebbar Gururaja <gururaja.hebbar@ti.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:52 +02:00
Heiko Stübner
7970cb770d pinctrl: add pinconf-generic define for a pin-default pull
There exist controllers that don't support to set the pull to up or down
separately but instead automatically set the pull direction based on
embedded knowledge inside the controller, for example depending on the
selected mux function of the pin.

Therefore this patch adds another config option to use this default
pull-state for a pin where it is not possible to know or decide if the
pin will be pulled up or down.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:51 +02:00
Jingchang Lu
78bafc6618 pinctrl: add VF610 pinctrl driver
Adds Freescale Vybrid VF610 pin controller
driver to IMX common pinctrl driver framework.

Signed-off-by: Jingchang Lu <b35083@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:51 +02:00
Jingchang Lu
bf5a530971 pinctrl: imx: add VF610 support to imx pinctrl framework
On some platforms such as VF610, offset of mux and pad ctrl register
may be zero, and the mux_mode and config_val are in one 32-bit register.
This patch adds support to imx core pinctrl framework to handle these
cases.

Signed-off-by: Jingchang Lu <b35083@freescale.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:51 +02:00
James Hogan
7bbc87b801 Documentation/pinctrl.txt: fix typo "with with"
Fix typo in "communicate directly with with the pinctrl subsystem".

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:51 +02:00
Patrice Chotard
d2752ae54d pinctrl: abx500: fix abx500_gpio_dbg_show_one() to show pull up/down
- rework abx500_gpio_dbg_show_one() to take in account pull up/down
  feature available on AB8540 only.
- add abx500_get_pull_updown() needed by abx500_gpio_dbg_show_one()
- rename abx500_config_pull_updown() to abx500_set_pull_updown()

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:51 +02:00
Patrice Chotard
9ed3cd3338 pinctrl: abx500: allow to set pull up
On ABx500 chip family, all pins support only pull down except for
AB8540 which supports pull up/down on some pins.
Rework abx500_pin_config_set to be able to set pull up on
pins which support this feature.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:51 +02:00
Patrice Chotard
10a8be5414 pinctrl: abx500: fix abx500_config_pull_updown
Fix abx500_config_pull_updown() to set correct bit in
AB8540_GPIO_PULL_UPDOWN_REG.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:50 +02:00
James Hogan
a2df4269ca pinconf-generic: add BIAS_BUS_HOLD pinconf
Add a new PIN_CONFIG_BIAS_BUS_HOLD pin configuration for a bus holder
pin mode (also known as bus keeper, or repeater). This is a weak latch
which drives the last value on a tristate bus. Another device on the bus
can drive the bus high or low before going tristate to change the value
driven by the pin.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:50 +02:00
James Hogan
73ae368cd3 pinconf-generic: add drive strength to debugfs output
Add the drive strength pinconf to debugfs output (with the unit "mA").

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:50 +02:00
Patrice Chotard
b0bb6426e4 pinctrl: abx500: suppress unused mutex
Suppress a mutex which was initialized on probe
and destroyed on remove but never used.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:50 +02:00
Barry Song
bc8d25a405 pinctrl: sirf: save the status in suspend and restore after resuming
this patch saves the status of pinctrl registers and restore them while
resuming. this makes all drivers have coherent status for pinmux after
suspending and resuming.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:50 +02:00
Linus Walleij
44d5f7bbea pinctrl: sink pinctrldev_list_mutex
The pinctrldev_list_mutex is sinked into the functions that
actually traverse the list and lock it there. The code makes
much more sense in this way. All the callers are in
non-performance critical paths and the code is way more
readable this way.

Also refactor the function get_pinctrl_dev_from_devname() to
follow the design pattern of get_pinctrl_dev_from_of_node()
which is slightly simpler.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:50 +02:00
Barry Song
3370dc916c pinctrl:sirf:re-arch and add support for new SiRFatlas6 SoC
atlas6 is a SoC very similar with primaII, the register layput of
pinctrl is same, but the pads, groups and functions of atlas6 have
different layout with prima2, this patch
1. pull the definition of pads, groups and functions out of the
pinctrl-sirf driver,and put them into soc-specific files
2. add pads, groups and functions tables for atlas6
3. let pads, groups and functions tables become the config data of
   the related dt compatible node, so the pinctrl-sirf can support
   all SiRF SoCs with the config data as private data.

In this patch,we create a sirf dir, and let
the old drivers/pinctrl/pinctrl-sirf.c =
        drivers/pinctrl/sirf/pinctrl-prima2.c +
        drivers/pinctrl/sirf/pinctrl-sirf.c

drivers/pinctrl/sirf/pinctrl-atlas6.c is a newly created file for the
pin layout of atlas6.

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:49 +02:00
Laurent Navet
76cda6ec39 drivers: pinctrl: vt8500: use devm_ioremap_resource()
Replace a call to deprecated devm_request_and_ioremap by devm_ioremap_resource.

Found with coccicheck and this semantic patch:
 scripts/coccinelle/api/devm_ioremap_resource.cocci

Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:49 +02:00
Sebastian Hesselbarth
bbd7b275db pinctrl: dove: add PMU functions to pinctrl
Dove power management unit can mux some special functions to mpp0-15.
This patch adds support to set/get the current PMU function mapped
to the corresponding mpp pins. The device tree documentation is also
updated accordingly.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:49 +02:00
Wolfram Sang
8ec136d0f3 drivers/pinctrl/spear: don't check resource with devm_ioremap_resource
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:49 +02:00
Shawn Guo
4fdf774fc9 pinctrl: enable build of pinctrl-imx6sl driver
The pinctrl-imx6sl is in place.  Enable the build of it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:49 +02:00
Wolfram Sang
f50b9e12db drivers/pinctrl: don't check resource with devm_ioremap_resource
devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:49 +02:00
Jingoo Han
dbf850c687 pinctrl: u300: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:48 +02:00
Jingoo Han
3e6eeafc9c pinctrl: sirf: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:48 +02:00
Jingoo Han
59eb14dcc6 pinctrl: mxs: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:48 +02:00
Jingoo Han
c87feeeb1e pinctrl: coh901: remove unnecessary platform_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d06310
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-16 11:56:48 +02:00
Sedat Dilek
851f665725 kconfig/lxdialog: Add definitions for mininimum (re)size values
Commit c8dc68ad0f ("kconfig/lxdialog: support resize") added support
for resizing, but forgot to collect all hardcoded values at one single
place.

Also add a definition for the check for a minimum screen/window size
of 80x19.

[ ChangeLog v3:
  * Rename MENU_{HEIGTH,WIDTH}_MIN -> MENUBOX_{HEIGTH,WIDTH}_MIN
  ChangeLog v2:
  * Rename WIN_{HEIGTH,WIDTH}_MIN -> WINDOW_{HEIGTH,WIDTH}_MIN
  * Mention the check for a minimum screen/window size in the changelog
  * Add a comment above the block of new definitions ]

Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2013-06-16 11:09:56 +02:00
Arve Hjønnevåg
fbe98bb9ed kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on
The defconfig and Kconfig combination below, which is based on 3.10-rc4
Kconfigs, resulted in several options getting set to "m" instead of "y".

defconfig.choice:
---8<---
CONFIG_MODULES=y
CONFIG_USB_ZERO=y
---8<---

Kconfig.choice:
---8<---
menuconfig MODULES
	bool "Enable loadable module support"

config CONFIGFS_FS
	tristate "Userspace-driven configuration filesystem"

config OCFS2_FS
        tristate "OCFS2 file system support"
        depends on CONFIGFS_FS
        select CRC32

config USB_LIBCOMPOSITE
	tristate
	select CONFIGFS_FS

choice
	tristate "USB Gadget Drivers"
	default USB_ETH

config USB_ZERO
	tristate "Gadget Zero (DEVELOPMENT)"
	select USB_LIBCOMPOSITE

config USB_ETH
	tristate "Ethernet Gadget (with CDC Ethernet support)"
	select USB_LIBCOMPOSITE

endchoice

config CRC32
        tristate "CRC32/CRC32c functions"
        default y

choice
        prompt "CRC32 implementation"
        depends on CRC32
        default CRC32_SLICEBY8

config CRC32_SLICEBY8
        bool "Slice by 8 bytes"

endchoice
---8<---

$ scripts/kconfig/conf --defconfig=defconfig.choice Kconfig.choice

would result in:

.config:
---8<---
CONFIG_MODULES=y
CONFIG_CONFIGFS_FS=m
CONFIG_USB_LIBCOMPOSITE=m
CONFIG_USB_ZERO=m
CONFIG_CRC32=y
CONFIG_CRC32_SLICEBY8=y
---8<---

when the expected result would be:

.config:
---8<---
CONFIG_MODULES=y
CONFIG_CONFIGFS_FS=y
CONFIG_USB_LIBCOMPOSITE=y
CONFIG_USB_ZERO=y
CONFIG_CRC32=y
CONFIG_CRC32_SLICEBY8=y
---8<---

Signed-off-by: Arve Hjønnevåg <arve@android.com>
[yann.morin.1998@free.fr: add the resulting .config to commit log,
                          remove unneeded USB_GADGET from the defconfig]
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
2013-06-16 11:00:30 +02:00
Haojian Zhuang
045779942c clk: gate: add CLK_GATE_HIWORD_MASK
In Rockchip Cortex-A9 based chips, they don't use paradigm of
reading-changing-writing the register contents.  Instead they
use a hiword mask to indicate the changed bits.

When b1 should be set as gate, it also needs to indicate the change
by setting hiword mask (b1 << 16).

The patch adds gate flag for this usage.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-15 20:23:53 -07:00
Haojian Zhuang
d57dfe7508 clk: divider: add CLK_DIVIDER_HIWORD_MASK flag
In both Hisilicon & Rockchip Cortex-A9 based chips, they don't use the
paradigm of reading-changing-writing the register contents.
Instead they use a hiword mask to indicate the changed bits.

When b01 should be set as setting divider, it also needs to indicate
the change by setting hiword mask (b11 << 16).

The patch adds divider flag for this usage.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-15 20:23:49 -07:00
Haojian Zhuang
ba492e9007 clk: mux: add CLK_MUX_HIWORD_MASK
In both Hisilicon & Rockchip Cortex-A9 based chips, they don't use the
paradigm of reading-changing-writing the register contents.
Instead they use a hiword mask to indicate the changed bits.

When b01 should be set as switching mux, it also needs to indicate
the change by setting hiword mask (b11 << 16).

The patch adds mux flag for this usage.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Mike Turquette <mturquette@linaro.org>
2013-06-15 20:23:36 -07:00
Rafael J. Wysocki
592a55d835 PM / AVS: SmartReflex: misc. cleanups for v3.11
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJRukQ5AAoJEFk3GJrT+8Zl4P8QAI1KZL6dzhUTktwPUGOvtrjG
 XIu63FXpKmDUoD9ul3kirsvv1oj18ewZ1i/q0A1yOTkQvvHYKOKlSQHY351CM5qk
 tMdriFEsfhfJcVMQHh3aJWQG7Es0bYq1Qr4Se/rqXbO+bM94bAgGulGR8wOYKfLG
 WlKLn8CIkQ3uKYOpBhj96KVaOTtmyFxjuqNNNyuhW0/AnxilXPEiRp33+SYUmfzM
 KfPTrcjccKxVqrcWg8d0RvVWY/tt/HVXqtmpn35PsfTR88XvLxfESaipxJuRkTMC
 3MUn8iuUMkpG4KUXuYCX9znIUbVooFsjqwQs71Tbxh1tcjp0gkGdJCyNt6H2lQlO
 2wFMdcYVuF6McF5kH69bBAqLoJtf76+s3iB5ZvOD1RGWCDmO8appO5xN6ANJwsfE
 25YMmBrU3e7ZrVIB6rl8xavxr1Zn70uEew8mnh5bMzPJhUzfhPdaigmYaH9HaYWZ
 ANcHqmMu7HW97ZOMdPzYhF/UrVozUTvElUqZXAlyL2rmJSPloj9Oxc8OUL7SzHui
 bHJC7rR4qZybrjnEJfvaOq/HfPzH6800S2z0d5bD9eUI9kadI2zi2ISIgaFahLZF
 XexKd2insf6lbBu/prbTDEFwST1gZD42J5FC7nNWkgxpaHZ/05NGKaJbrqs/5TGr
 DD+dpfc59osTP6tlZGIh
 =3I+w
 -----END PGP SIGNATURE-----

Merge tag 'omap-pm-v3.11/avs' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into pm-omap

Pull PM / AVS: SmartReflex: misc. cleanups for 3.11 from Kevin Hilman.
2013-06-16 01:30:46 +02:00
Chris Wilson
19b2dbde57 drm/i915: Restore fences after resume and GPU resets
Stéphane Marchesin found that fences for pinned objects (i.e. the
scanout) were not being restored upon resume, leading to corruption on
the display and reference counting issues. This is due to a bug in

commit 312817a39f [2.6.38]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Mon Nov 22 11:50:11 2010 +0000

    drm/i915: Only save and restore fences for UMS

that zapped the pinned fences even though they were in use.
Fortuitously, whilst we forced a VT switch during suspend and resume,
no fences were ever pinned at the time. However, we now can do
switchless S3 transitions and so the old bug finally surfaces.

Reported-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-06-16 01:10:45 +02:00