Commit graph

388,138 commits

Author SHA1 Message Date
Charles Keepax
5be9c5b477 ASoC: wm5110: Correct rate control for DSP4
Reported-by: Dennis May <dennis.may@wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-14 15:59:55 +01:00
Julia Lawall
61cb48c3f9 scripts/coccinelle: check for field address argument to kfree
The argument to kfree should not be the address of a structure field.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-14 15:33:08 +02:00
Nicolas Palix
c00b511026 Coccinelle: Update the Coccinelle section of MAINTAINERS
Add Michal Marek and the misc branch of the kbuild tree
in the Coccinelle section of MAINTAINERS.

Signed-off-by: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-14 15:31:10 +02:00
Nicolas Palix
1f0a6742dd Coccinelle: Make 'report' the default mode
It appears that the 'report' mode is the one always
provided by the semantic patches included in the kernel.
It is thus more natural to select it by default.

The 'chain' mode is however kept and the 'patch' mode
is still the first tried in that case.

Signed-off-by: Nicolas Palix <nicolas.palix@imag.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-06-14 15:26:47 +02:00
Bob Peterson
512cbf02fd GFS2: fix regression in dir_double_exhash
Recent commit e8830d8 introduced a bug in function dir_double_exhash;
it was failing to set h in the fall-back case. This patch corrects it.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-06-14 13:27:17 +01:00
Valentin Ilie
bda7eb2763 NFC: mei_phy: Clean up file
Fix checkpatch warnings.
Replace __attribute__((__packed__)) with __packed.
Replace spaces with tabs.

Signed-off-by: Valentin Ilie <valentin.ilie@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:45:11 +02:00
Samuel Ortiz
4ca546e554 NFC: llcp: Fix the well known services endianness
The WKS (Well Known Services) bitmask should be transmitted in big endian
order. Picky implementations will refuse to establish an LLCP link when the
WKS bit 0 is not set to 1. The vast majority of implementations out there
are not that picky though...

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:45:10 +02:00
Samuel Ortiz
f768b34017 NFC: llcp: Set the LLC Link Management well known service bit
In order to advertise our LLCP support properly and to follow the LLCP
specs requirements, we need to initialize the WKS (Well-Known Services)
bitfield to 1 as SAP 0 is the only mandatory supported service.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:45:09 +02:00
Samuel Ortiz
2635a4bdfa NFC: llcp: Do not send pending Tx frames when the remote is not ready
When we receive a RNR, the remote is busy processing the last received
frame. We set a local flag for that, and we should send a SYMM when it
is set instead of sending any pending frame.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:45:08 +02:00
Samuel Ortiz
b4011239a0 NFC: llcp: Fix non blocking sockets connections
Without the new LLCP_CONNECTING state, non blocking sockets will be
woken up with a POLLHUP right after calling connect() because their
state is stuck at LLCP_CLOSED.
That prevents userspace from implementing any proper non blocking
socket based NFC p2p client.

Cc: stable@vger.kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:45:07 +02:00
Thierry Escande
7cbe0ff3e4 NFC: Add a nfc hardware simulation driver
This driver declares two virtual NFC devices supporting NFC-DEP protocol.
An LLCP connection can be established between them and all packets sent
from one device is sent back to the other, acting as loopback devices.

Once established, the LLCP link can be disconnected by disabling the target
device (with rfkill, nfctool, or neard disable-adapter test script).

Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:45:06 +02:00
Thierry Escande
f1b79dc891 NFC: Fix a potential memory leak
In nfc_llcp_tx_work() the sk_buff is not freed when the llcp_sock
is null and the PDU is an I one.

Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:45:06 +02:00
Thierry Escande
17f7ae16ae NFC: Keep socket alive until the DISC PDU is actually sent
This patch keeps the socket alive and therefore does not remove
it from the sockets list in the local until the DISC PDU has been
actually sent. Otherwise we would reply with DM PDUs before sending
the DISC one.

Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:45:05 +02:00
Thierry Escande
58e3dd1558 NFC: Rename nfc_llcp_disconnect() to nfc_llcp_send_disconnect()
nfc_llcp_send_disconnect() already exists but is not used.
nfc_llcp_disconnect() naming is not consistent with other PDU
sending functions.
This patch removes nfc_llcp_send_disconnect() and renames
nfc_llcp_disconnect()

Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:45:04 +02:00
Olivier Guiter
86eca4e71f NFC: pn533: Fix ACR122 related debug output
Instead of dumping ACR122 frames as errors, we use the print_hex_dump()
dynamic debug APIs.
We also print an accurate IC version, as the ACR122 is pn532 based.

Signed-off-by: Olivier Guiter <olivier.guiter@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:45:03 +02:00
Samuel Ortiz
be0856535c NFC: Add secure element enablement netlink API
Enabling or disabling an NFC accessible secure element through netlink
requires giving both an NFC controller and a secure element indexes.
Once enabled the secure element will handle card emulation once polling
starts.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:45:02 +02:00
Samuel Ortiz
c531c9ec29 NFC: Add secure element enablement internal API
Called via netlink, this API will enable or disable a specific secure
element. When a secure element is enabled, it will handle card emulation
and more generically ISO-DEP target mode, i.e. all target mode cases
except for p2p target mode.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:45:01 +02:00
Samuel Ortiz
ee656e9d09 NFC: Remove and free all SEs when releasing an NFC device
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:45:00 +02:00
Samuel Ortiz
2757c3723c NFC: Send netlink events for secure elements additions and removals
When an NFC driver or host controller stack discovers a secure element,
it will call nfc_add_se(). In order for userspace applications to use
these secure elements, a netlink event will then be sent with the SE
index and its type. With that information userspace applications can
decide wether or not to enable SEs, through their indexes.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:44:59 +02:00
Samuel Ortiz
fed7c25ec0 NFC: Add secure elements addition and removal API
This API will allow NFC drivers to add and remove the secure elements
they know about or detect. Typically this should be called (asynchronously
or not) from the driver or the host interface stack detect_se hook.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:44:58 +02:00
Samuel Ortiz
0a946301c2 NFC: Extend and fix the internal secure element API
Secure elements need to be discovered after enabling the NFC controller.
This is typically done by the NCI core and the HCI drivers (HCI does not
specify how to discover SEs, it is left to the specific drivers).
Also, the SE enable/disable API explicitely takes a SE index as its
argument.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:44:53 +02:00
Samuel Ortiz
0b456c418a NFC: Remove the static supported_se field
Supported secure elements are typically found during a discovery process
initiated when the NFC controller is up and running. For a given NFC
chipset there can be many configurations (embedded SE or not, with or
without a SIM card wired to the NFC controller SWP interface, etc...) and
thus driver code will never know before hand which SEs are available.
So we remove this field, it will be replaced by a real SE discovery
mechanism.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:44:19 +02:00
Samuel Ortiz
322bce957e NFC: pn533: Copy NFCID2 through ATR_REQ
When using NFC-F we should copy the NFCID2 buffer that we got from
SENSF_RES through the ATR_REQ NFCID3 buffer. Not doing so violates
NFC Forum digital requirement #189.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:44:18 +02:00
Samuel Ortiz
31c44464ac NFC: pn533: Use 0x3 for SENSF_REQ Time Slot Number (TSN)
LLCP validation requires TSN to be 0x03 for type F.

Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:44:17 +02:00
Frederic Danis
391d8a2da7 NFC: Add NCI over SPI receive
Before any operation, driver interruption is de-asserted to prevent
race condition between TX and RX.

Transaction starts by emitting "Direct read" and acknowledged mode
bytes. Then packet length is read allowing to allocate correct NCI
socket buffer. After that payload is retrieved.

A delay after the transaction can be added.
This delay is determined by the driver during nci_spi_allocate_device()
call and can be 0.

If acknowledged mode is set:
- CRC of header and payload is checked
- if frame reception fails (CRC error): NACK is sent
- if received frame has ACK or NACK flag: unblock nci_spi_send()

Payload is passed to NCI module.

At the end, driver interruption is re asserted.

Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:44:16 +02:00
Frederic Danis
ee9596d467 NFC: Add NCI over SPI send
Before any operation, driver interruption is de-asserted to prevent
race condition between TX and RX.

The NCI over SPI header is added in front of NCI packet.
If acknowledged mode is set, CRC-16-CCITT is added to the packet.
Then the packet is forwarded to SPI module to be sent.

A delay after the transaction is added.
This delay is determined by the driver during nci_spi_allocate_device()
call and can be 0.

After data has been sent, driver interruption is re-asserted.

If acknowledged mode is set, nci_spi_send will block until
acknowledgment is received.

Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:44:15 +02:00
Frederic Danis
8a00a61b0e NFC: Add basic NCI over SPI
The NFC Forum defines a transport interface based on
Serial Peripheral Interface (SPI) for the NFC Controller
Interface (NCI).

This module implements the SPI transport of NCI, calling SPI module
directly to read/write data to NFC controller (NFCC).

NFCC driver should provide functions performing device open and close.
It should also provide functions asserting/de-asserting interruption
to prevent TX/RX race conditions.
NFCC driver can also fix a delay between transactions if needed by
the hardware.

Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 13:44:03 +02:00
Nicolin Chen
f5055f9373 ASoC: wm8962: Enable start-up and normal bias after reset in runtime resume
This part of bias settings are essential for WM8962 to power up. Without it
"wm8962 0-001a: DC servo timed out" might be prompted due to power-up failure
that happens to FLL if being used.

The driver's also bringing the bias down in the suspend path so it needs to be
powered up in the resume path for symmetry.

According to dapm_pre_sequence_async(), DAPM would call pm_runtime_get_sync()
to let driver finish the bias settings in pm_runtime_resume() before the bias
level being set to STANDBY. So no need to worry about disordered settings for
VMID of WM8962.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-14 12:43:16 +01:00
Lars-Peter Clausen
efc77e36ae ASoC: dapm: Add snd_soc_dapm_switch to the power up/down sequence table
The power up/down sequence order for DAPM switch widgets is not explicitly
initialized, causing them to be run always as the first widget type for both
power up and down. Move it to the same position in the sequence as other mixer
widget types.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-14 12:35:23 +01:00
Lars-Peter Clausen
656ca9d327 ASoC: dapm: Remove unused long_name field from snd_soc_dapm_path struct
Since commit 85762e71 ("ASoC: dapm: Implement mixer control sharing") the
long_name field of the snd_soc_dapm_path struct is unused. All of the name
handling now happens entirely in dapm_create_or_share_mixmux_kcontrol(). So we
can remove the long_name field from the snd_soc_dapm_path struct.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-14 12:34:11 +01:00
Lars-Peter Clausen
8872293fc3 ASoC: dapm: Add a helper function to free a DAPM path
We have the same code for freeing a DAPM path in three different locations.
Introduce a new helper function to take care of this.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-14 12:34:11 +01:00
Lars-Peter Clausen
58fee775b7 ASoC: dapm: Remove unnecessary loop
The condition 'i == item' is only true when, well, 'i' equals 'item'.
So just use 'item' directly as the index into the array.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-14 12:34:10 +01:00
Lars-Peter Clausen
6b75bf0c5b ASoC: dapm: Setup private_free callback for dapm kcontrols
The private data containing the widget list that is a assigned to a DAPM
kcontrol is never freed. Setup the private_free for DAPM kcontrols to take care
of this.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-14 12:34:10 +01:00
Mark Brown
41139938cd ASoC: SPEAr: Hide component drivers in Kconfig
The individual component drivers are only useful with a machine driver and
should be selected by the machine drivers so shouldn't have help text of
their own in order to hide them in interactive configuration.

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-14 12:28:46 +01:00
Mark Brown
6df2610c15 ASoC: SPEAr: Add dependency on dmaengine helpers
I'd be very surprised if anyone has used the Kconfig...

Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-14 12:26:20 +01:00
Steven Whitehouse
6d4ade986f GFS2: Add atomic_open support
I've restricted atomic_open to only operate on regular files, although
I still don't understand why atomic_open should not be possible also for
directories on GFS2. That can always be added in later though, if it
makes sense.

The ->atomic_open function can be passed negative dentries, which
in most cases means either ENOENT (->lookup) or a call to d_instantiate
(->create). In the GFS2 case though, we need to actually perform the
look up, since we do not know whether there has been a new inode created
on another node. The look up calls d_splice_alias which then tries to
rehash the dentry - so the solution here is to simply check for that
in d_splice_alias. The same issue is likely to affect any other cluster
filesystem implementing ->atomic_open

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "J. Bruce Fields" <bfields fieldses org>
Cc: Jeff Layton <jlayton@redhat.com>
2013-06-14 11:17:15 +01:00
Emil Goode
55dafe5dc2 ASoC: Fix double assignment of .owner in struct snd_soc_card
In struct snd_soc_card zylonite .owner is assigned THIS_MODULE
twice, remove one of them.

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-14 11:00:03 +01:00
Joe Perches
adc88ffc40 frv: Convert use of typedef ctl_table to struct ctl_table
This typedef is unnecessary and should just be removed.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-06-14 11:56:07 +02:00
Jean-Christophe PLAGNIOL-VILLARD
8ea2c86449 Merge branch 'fbdev-3.11' of git://gitorious.org/linux-omap-dss2/linux into fbdev/for-next 2013-06-14 17:52:18 +08:00
Mark Brown
384b834558 Merge branch 'fix/wm8962' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-wm8962
Conflicts:
	sound/soc/codecs/wm8962.c
2013-06-14 10:16:06 +01:00
Nicolin Chen
2e7ee15ced ASoC: wm8962: Remove remaining direct register cache accesses
Also fix return values for headphone switch updates.

Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org
2013-06-14 10:13:53 +01:00
Steve Capper
af07484863 ARM64: mm: THP support.
Bring Transparent HugePage support to ARM. The size of a
transparent huge page depends on the normal page size. A
transparent huge page is always represented as a pmd.

If PAGE_SIZE is 4KB, THPs are 2MB.
If PAGE_SIZE is 64KB, THPs are 512MB.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-14 09:52:41 +01:00
Steve Capper
d03bb1455f ARM64: mm: Raise MAX_ORDER for 64KB pages and THP.
The buddy allocator has a default MAX_ORDER of 11, which is too
low to allocate enough memory for 512MB Transparent HugePages if
our base page size is 64KB.

This patch introduces MAX_ZONE_ORDER and sets it to 14 when 64KB
pages are used in conjuction with THP, otherwise the default value
of 11 is used.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-14 09:52:40 +01:00
Steve Capper
084bd29810 ARM64: mm: HugeTLB support.
Add huge page support to ARM64, different huge page sizes are
supported depending on the size of normal pages:

PAGE_SIZE is 4KB:
   2MB - (pmds) these can be allocated at any time.
1024MB - (puds) usually allocated on bootup with the command line
         with something like: hugepagesz=1G hugepages=6

PAGE_SIZE is 64KB:
 512MB - (pmds) usually allocated on bootup via command line.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-14 09:52:40 +01:00
Steve Capper
59911ca432 ARM64: mm: Move PTE_PROT_NONE bit.
Under ARM64, PTEs can be broadly categorised as follows:
   - Present and valid: Bit #0 is set. The PTE is valid and memory
     access to the region may fault.

   - Present and invalid: Bit #0 is clear and bit #1 is set.
     Represents present memory with PROT_NONE protection. The PTE
     is an invalid entry, and the user fault handler will raise a
     SIGSEGV.

   - Not present (file or swap): Bits #0 and #1 are clear.
     Memory represented has been paged out. The PTE is an invalid
     entry, and the fault handler will try and re-populate the
     memory where necessary.

Huge PTEs are block descriptors that have bit #1 clear. If we wish
to represent PROT_NONE huge PTEs we then run into a problem as
there is no way to distinguish between regular and huge PTEs if we
set bit #1.

To resolve this ambiguity this patch moves PTE_PROT_NONE from
bit #1 to bit #2 and moves PTE_FILE from bit #2 to bit #3. The
number of swap/file bits is reduced by 1 as a consequence, leaving
60 bits for file and swap entries.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-14 09:52:19 +01:00
Steve Capper
072b1b62a6 ARM64: mm: Make PAGE_NONE pages read only and no-execute.
If we consider the following code sequence:

	my_pte = pte_modify(entry, myprot);
	x = pte_write(my_pte);
	y = pte_exec(my_pte);

If myprot comes from a PROT_NONE page, then x and y will both be
true which is undesireable behaviour.

This patch sets the no-execute and read-only bits for PAGE_NONE
such that the code above will return false for both x and y.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-14 09:42:46 +01:00
Steve Capper
f6bc87c39d ARM64: mm: Restore memblock limit when map_mem finished.
In paging_init the memblock limit is set to restrict any addresses
returned by early_alloc to fit within the initial direct kernel
mapping in swapper_pg_dir. This allows map_mem to allocate puds,
pmds and ptes from the initial direct kernel mapping.

The limit stays low after paging_init() though, meaning any
bootmem allocations will be from a restricted subset of memory.
Gigabyte huge pages, for instance, are normally allocated from
bootmem as their order (18) is too large for the default buddy
allocator (MAX_ORDER = 11).

This patch restores the memblock limit when map_mem has finished,
allowing gigabyte huge pages (and other objects) to be allocated
from all of bootmem.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2013-06-14 09:40:39 +01:00
Steve Capper
dfa5e237e9 mm: thp: Correct the HPAGE_PMD_ORDER check.
All Transparent Huge Pages are allocated by the buddy allocator.

A compile time check is in place that fails when the order of a
transparent huge page is too large to be allocated by the buddy
allocator. Unfortunately that compile time check passes when:
HPAGE_PMD_ORDER == MAX_ORDER
( which is incorrect as the buddy allocator can only allocate
memory of order strictly less than MAX_ORDER. )

This patch updates the compile time check to fail in the above
case.

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
2013-06-14 09:40:28 +01:00
Steve Capper
53313b2c91 x86: mm: Remove general hugetlb code from x86.
huge_pte_alloc, huge_pte_offset and follow_huge_p[mu]d have
already been copied over to mm.

This patch removes the x86 copies of these functions and activates
the general ones by enabling:
CONFIG_ARCH_WANT_GENERAL_HUGETLB

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
2013-06-14 09:40:15 +01:00
Steve Capper
9e5fc74c30 mm: hugetlb: Copy general hugetlb code from x86 to mm.
The huge_pte_alloc, huge_pte_offset and follow_huge_p[mu]d
functions in x86/mm/hugetlbpage.c do not rely on any architecture
specific knowledge other than the fact that pmds and puds can be
treated as huge ptes.

To allow other architectures to use this code (and reduce the need
for code duplication), this patch copies these functions into mm,
replaces the use of pud_large with pud_huge and provides a config
flag to activate them:
CONFIG_ARCH_WANT_GENERAL_HUGETLB

If CONFIG_ARCH_WANT_HUGE_PMD_SHARE is also active then the
huge_pmd_share code will be called by huge_pte_alloc (othewise we
call pmd_alloc and skip the sharing code).

Signed-off-by: Steve Capper <steve.capper@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
2013-06-14 09:40:01 +01:00