Commit graph

388,138 commits

Author SHA1 Message Date
Wei Yongjun
4674d0fecb NFC: pn533: Fix error return code in pn533_probe()
Fix to return -ENOMEM in the nfc device alloc error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 00:18:58 +02:00
Arron Wang
a69bdc1ecd NFC: pn544: Remove Felica and Jewel device presence check
There is no builtin command for driver to check the presence of
Felica and Jewel device, it is more reasonable for the userspace
daemon neard to build seperate commands to check the presence of
the card.

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 00:18:58 +02:00
Arron Wang
9c59844005 NFC: pn544: Identify Type F NFC-DEP through NFCID2
NFCID2 is defined as the first 2 manufacturer ID (IDm) bytes.
NFC DEP (NFC peer to peer) devices Type-F NFCID2 must start with
0x01fe according to the NFC Digital Specification.
By checking those first 2 bytes we send the right command either to the
reader gate when NFCID2 != 0x1fe (The NFC tag case) or to the NFCIP1 gate
when seeing an NFC DEP device (The NFC peer to peer case).

Without this fix, Felica (Type F) tags are not properly detected with this
driver.

Signed-off-by: Arron Wang <arron.wang@intel.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-14 00:18:58 +02:00
NeilBrown
725d6e579f md/raid10: check In_sync flag in 'enough()'.
It isn't really enough to check that the rdev is present, we need to
also be sure that the device is still In_sync.

Doing this requires using rcu_dereference to access the rdev, and
holding the rcu_read_lock() to ensure the rdev doesn't disappear while
we look at it.

Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-14 08:10:27 +10:00
NeilBrown
635f6416a2 md/raid10: locking changes for 'enough()'.
As 'enough' accesses conf->prev and conf->geo, which can change
spontanously, it should guard against changes.
This can be done with device_lock as start_reshape holds device_lock
while updating 'geo' and end_reshape holds it while updating 'prev'.

So 'error' needs to hold 'device_lock'.

On the other hand, raid10_end_read_request knows which of the two it
really wants to access, and as it is an active request on that one,
the value cannot change underneath it.

So change _enough to take flag rather than a pointer, pass the
appropriate flag from raid10_end_read_request(), and remove the locking.

All other calls to 'enough' are made with reconfig_mutex held, so
neither 'prev' nor 'geo' can change.

Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-14 08:10:27 +10:00
Jingoo Han
b29bebd66d md: replace strict_strto*() with kstrto*()
The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-14 08:10:26 +10:00
Hannes Reinecke
90f5f7ad4f md: Wait for md_check_recovery before attempting device removal.
When a device has failed, it needs to be removed from the personality
module before it can be removed from the array as a whole.
The first step is performed by md_check_recovery() which is called
from the raid management thread.

So when a HOT_REMOVE ioctl arrives, wait briefly for md_check_recovery
to have run.  This increases the chance that the ioctl will succeed.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Neil Brown <nfbrown@suse.de>
2013-06-14 08:10:26 +10:00
NeilBrown
3f6bbd3ffd dm-raid: silence compiler warning on rebuilds_per_group.
This doesn't really need to be initialised, but it doesn't hurt,
silences the compiler, and as it is a counter it makes sense for it to
start at zero.

Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-14 08:10:26 +10:00
Jonathan Brassow
a4dc163a55 DM RAID: Fix raid_resume not reviving failed devices in all cases
DM RAID:  Fix raid_resume not reviving failed devices in all cases

When a device fails in a RAID array, it is marked as Faulty.  Later,
md_check_recovery is called which (through the call chain) calls
'hot_remove_disk' in order to have the personalities remove the device
from use in the array.

Sometimes, it is possible for the array to be suspended before the
personalities get their chance to perform 'hot_remove_disk'.  This is
normally not an issue.  If the array is deactivated, then the failed
device will be noticed when the array is reinstantiated.  If the
array is resumed and the disk is still missing, md_check_recovery will
be called upon resume and 'hot_remove_disk' will be called at that
time.  However, (for dm-raid) if the device has been restored,
a resume on the array would cause it to attempt to revive the device
by calling 'hot_add_disk'.  If 'hot_remove_disk' had not been called,
a situation is then created where the device is thought to concurrently
be the replacement and the device to be replaced.  Thus, the device
is first sync'ed with the rest of the array (because it is the replacement
device) and then marked Faulty and removed from the array (because
it is also the device being replaced).

The solution is to check and see if the device had properly been removed
before the array was suspended.  This is done by seeing whether the
device's 'raid_disk' field is -1 - a condition that implies that
'md_check_recovery -> remove_and_add_spares (where raid_disk is set to -1)
-> hot_remove_disk' has been called.  If 'raid_disk' is not -1, then
'hot_remove_disk' must be called to complete the removal of the previously
faulty device before it can be revived via 'hot_add_disk'.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-14 08:10:25 +10:00
Jonathan Brassow
f381e71b04 DM RAID: Break-up untidy function
DM RAID:  Break-up untidy function

Clean-up excessive indentation by moving some code in raid_resume()
into its own function.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-14 08:10:25 +10:00
Jonathan Brassow
9092c02d94 DM RAID: Add ability to restore transiently failed devices on resume
DM RAID: Add ability to restore transiently failed devices on resume

This patch adds code to the resume function to check over the devices
in the RAID array.  If any are found to be marked as failed and their
superblocks can be read, an attempt is made to reintegrate them into
the array.  This allows the user to refresh the array with a simple
suspend and resume of the array - rather than having to load a
completely new table, allocate and initialize all the structures and
throw away the old instantiation.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: NeilBrown <neilb@suse.de>
2013-06-14 08:10:24 +10:00
Grant Likely
706b78f37f dtc: ensure #line directives don't consume data from the next line
Previously, the #line parsing regex ended with ({WS}+[0-9]+)?. The {WS}
could match line-break characters. If the #line directive did not contain
the optional flags field at the end, this could cause any integer data on
the next line to be consumed as part of the #line directive parsing. This
could cause syntax errors (i.e. #line parsing consuming the leading 0
from a hex literal 0x1234, leaving x1234 to be parsed as cell data,
which is a syntax error), or invalid compilation results (i.e. simply
consuming literal 1234 as part of the #line processing, thus removing it
from the cell data).

Fix this by replacing {WS} with [ \t] so that it can't match line-breaks.

Convert all instances of {WS}, even though the other instances should be
irrelevant for any well-formed #line directive. This is done for
consistency and ultimate safety.

[Cherry picked from DTC commit a1ee6f068e1c8dbc62873645037a353d7852d5cc]

Reported-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-06-13 22:12:15 +01:00
Grant Likely
2a6a08ca5e dtc: Update generated files to output from Bison 2.5
This patch merely updates the generated dtc parser and lexer files to
the output generated by Bison 2.5. The previous versions were generated
from version 2.4.1. The only reason for this commit is to minimize the
diff on the next commit which fixes a bug in the DTC #line directive
parsing. Otherwise the Bison changes would be intermingled with the
functional changes.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2013-06-13 22:12:14 +01:00
Benjamin Herrenschmidt
d25d86949b of: Fix locking vs. interrupts
The OF code uses irqsafe locks everywhere except in a handful of functions
for no obvious reasons. Since the conversion from the old rwlocks, this
now triggers lockdep warnings when used at interrupt time. At least one
driver (ibmvscsi) seems to be doing that from softirq context.

This converts the few non-irqsafe locks into irqsafe ones, making them
consistent with the rest of the code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-13 22:12:14 +01:00
Ian Campbell
b0a4d8b3cf kbuild: make sure we clean up DTB temporary files
Various temporary files used when building DTB files were not suffixed with
.tmp and therefore were not cleaned up by "make clean".

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-06-13 22:12:13 +01:00
Linus Torvalds
25e33ed9c7 ACPI fix for 3.10-rc6
- ACPI fix for an issue causing ACPI video driver to attempt to bind
   to devices it shouldn't touch from Rafael J Wysocki.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRugxCAAoJEKhOf7ml8uNsOhYP/iDqV7Ey0b1omkGhxRdZhtX8
 JsCvELn4sfPzf+JIzsuuS5fStnMNNvDdoFfERoMp4ObtDFPhCUDLkrz6y62MY57J
 VAwqdudhw8HBynn/XZRwGj2q0Z/ZWBZyBNufJIGL+v6d1gYGXV35mSIdiIUWsoKa
 sNQapGAybdgX0oq6DQ9uOu9916qraaugMuLpcst1M7oifwLH97IB1P7FN87+vbsk
 2eDbli++QZcf8FwzbU9Xz3Xwx4rA1T+vSd+da+a1UGczAd/5qLe3LhmFqrmpqOcw
 pGOV6PAGdikAose8iW9Mnxfn5SqaKH0AE8L9SS2Ut5WZf9unHLWA74F+GefUK/Rv
 nHnXIzwK2cVbzkx93udLngoZTXYn1N0GcZB9j2rRH+QxRmLoZJlGoDDKP3cpitZt
 azCxGxHtS2xgi0f9OpyFLtaD8gBP9E8swYfYJIllcb+KySkL8yQEpF7U1z6wNgNZ
 doOQNxzNl8bSkNRp0pZygyd/T7qFYgasZEF67OkuWF8K6T9wlAdTdUpC0bWieT+d
 cZblo7qG+AFbTQYIOjvEzi0Cz9BhBMW2ifihz2xhy3kBemlgepK0tNuGO7OBw3ye
 U+rllXlrM1TUrwGCpvfM8wuJ/xRSzmRS1onzg6iO4NBW4UUzn9Z3bsp/YCY3azSI
 FNKBL3vi6dtN7LaGM0dj
 =1N+6
 -----END PGP SIGNATURE-----

Merge tag 'acpi-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "This is an alternative fix for the regression introduced in 3.9 whose
  previous fix had to be reverted right before 3.10-rc5, because it
  broke one of the Tony's machines.

  In this one the check is confined to the ACPI video driver (which is
  the only one causing the problem to happen in the first place) and the
  Tony's box shouldn't even notice it.

   - ACPI fix for an issue causing ACPI video driver to attempt to bind
     to devices it shouldn't touch from Rafael J Wysocki."

* tag 'acpi-3.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: Do not bind to device objects with a scan handler
2013-06-13 13:09:50 -07:00
Linus Torvalds
cb03dc094a Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
 "Another set of fixes, the biggest bit of this is yet another tweak to
  the UEFI anti-bricking code; apparently we finally got some feedback
  from Samsung as to what makes at least their systems fail.  This set
  should actually fix the boot regressions that some other systems (e.g.
  SGI) have exhibited.

  Other than that, there is a patch to avoid a panic with particularly
  unhappy memory layouts and two minor protocol fixes which may or may
  not be manifest bugs"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix typo in kexec register clearing
  x86, relocs: Move __vvar_page from S_ABS to S_REL
  Modify UEFI anti-bricking code
  x86: Fix adjust_range_size_mask calling position
2013-06-13 13:08:51 -07:00
Linus Torvalds
cb7e9704d5 Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fixes from Paul McKenney:
 "I must confess that this past merge window was not RCU's best showing.
  This series contains three more fixes for RCU regressions:

   1.   A fix to __DECLARE_TRACE_RCU() that causes it to act as an
        interrupt from idle rather than as a task switch from idle.
        This change is needed due to the recent use of _rcuidle()
        tracepoints that can be invoked from interrupt handlers as well
        as from idle.  Without this fix, invoking _rcuidle() tracepoints
        from interrupt handlers results in splats and (more seriously)
        confusion on RCU's part as to whether a given CPU is idle or not.
        This confusion can in turn result in too-short grace periods and
        therefore random memory corruption.

   2.   A fix to a subtle deadlock that could result due to RCU doing
        a wakeup while holding one of its rcu_node structure's locks.
        Although the probability of occurrence is low, it really
        does happen.  The fix, courtesy of Steven Rostedt, uses
        irq_work_queue() to avoid the deadlock.

   3.   A fix to a silent deadlock (invisible to lockdep) due to the
        interaction of timeouts posted by RCU debug code enabled by
        CONFIG_PROVE_RCU_DELAY=y, grace-period initialization, and CPU
        hotplug operations.  This will not occur in production kernels,
        but really does occur in randconfig testing.  Diagnosis courtesy
        of Steven Rostedt"

* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu: Fix deadlock with CPU hotplug, RCU GP init, and timer migration
  rcu: Don't call wakeup() with rcu_node structure ->lock held
  trace: Allow idle-safe tracepoints to be called from irq
2013-06-13 12:36:42 -07:00
Peter Hutterer
257867dc8d Input: MT - Specify that ABS_MT_SLOT must have a minimum of 0
This is effectively already in force through input_mt_init_slots, and uinput
too ignores the actual minimum.

Since slots are a kernel-genenerated axis only, non-zero minimums make
little sense and are likely to cause errors. Better to treat a non-zero
minimum as kernel bug if it ever happens.

Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2013-06-13 21:32:00 +02:00
Dave Chinner
ade1335afe xfs: ensure btree root split sets blkno correctly
For CRC enabled filesystems, the BMBT is rooted in an inode, so it
passes through a different code path on root splits than the
freespace and inode btrees. This is much less traversed by xfstests
than the other trees. When testing on a 1k block size filesystem,
I've been seeing ASSERT failures in generic/234 like:

XFS: Assertion failed: cur->bc_btnum != XFS_BTNUM_BMAP || cur->bc_private.b.allocated == 0, file: fs/xfs/xfs_btree.c, line: 317

which are generally preceded by a lblock check failure. I noticed
this in the bmbt stats:

$ pminfo -f xfs.btree.block_map

xfs.btree.block_map.lookup
    value 39135

xfs.btree.block_map.compare
    value 268432

xfs.btree.block_map.insrec
    value 15786

xfs.btree.block_map.delrec
    value 13884

xfs.btree.block_map.newroot
    value 2

xfs.btree.block_map.killroot
    value 0
.....

Very little coverage of root splits and merges. Indeed, on a 4k
filesystem, block_map.newroot and block_map.killroot are both zero.
i.e. the code is not exercised at all, and it's the only generic
btree infrastructure operation that is not exercised by a default run
of xfstests.

Turns out that on a 1k filesystem, generic/234 accounts for one of
those two root splits, and that is somewhat of a smoking gun. In
fact, it's the same problem we saw in the directory/attr code where
headers are memcpy()d from one block to another without updating the
self describing metadata.

Simple fix - when copying the header out of the root block, make
sure the block number is updated correctly.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
2013-06-13 14:18:02 -05:00
Tejun Heo
bc497bd33b percpu-refcount: implement percpu_ref_cancel_init()
Normally, percpu_ref_init() initializes and percpu_ref_kill()
initiates destruction which completes asynchronously.  The
asynchronous destruction can be problematic in init failure path where
the caller wants to destroy half-constructed object - distinguishing
half-constructed objects from the usual release method can be painful
for complex objects.

This patch implements percpu_ref_cancel_init() which synchronously
destroys the percpu_ref without invoking release.  To avoid
unintentional misuses, the function requires the ref to have finished
percpu_ref_init() but never used and triggers WARN otherwise.

v2: Explain the weird name and usage restriction in the function
    comment.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Kent Overstreet <koverstreet@google.com>
2013-06-13 11:08:27 -07:00
Tejun Heo
acac7883ee percpu-refcount: add __must_check to percpu_ref_init() and don't use ACCESS_ONCE() in percpu_ref_kill_rcu()
Two small changes.

* Unlike most init functions, percpu_ref_init() allocates memory and
  may fail.  Let's mark it with __must_check in case the caller
  forgets.

* percpu_ref_kill_rcu() is unnecessarily using ACCESS_ONCE() to
  dereference @ref->pcpu_count, which can be misleading.  The pointer
  is guaranteed to be valid and visible and can't change underneath
  the function.  Drop ACCESS_ONCE().

Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-13 11:08:26 -07:00
Linus Torvalds
dcae7f2dfc Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
 "Three kvm related memory management fixes, a fix for show_trace, a fix
  for early console output and a patch from Ben to help prevent compile
  errors in regard to irq functions (or our lack thereof)"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: Implement IRQ functions if !PCI
  s390/sclp: fix new line detection
  s390/pgtable: make pgste lock an explicit barrier
  s390/pgtable: Save pgste during modify_prot_start/commit
  s390/dumpstack: fix address ranges for asynchronous and panic stack
  s390/pgtable: Fix guest overindication for change bit
2013-06-13 11:02:31 -07:00
Tejun Heo
6f3d828f0f cgroup: remove cgroup->count and use
cgroup->count tracks the number of css_sets associated with the cgroup
and used only to verify that no css_set is associated when the cgroup
is being destroyed.  It's superflous as the destruction path can
simply check whether cgroup->cset_links is empty instead.

Drop cgroup->count and check ->cset_links directly from
cgroup_destroy_locked().

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2013-06-13 10:55:18 -07:00
Tejun Heo
ddd69148bd cgroup: drop unnecessary RCU dancing from __put_css_set()
__put_css_set() does RCU read access on @cgrp across dropping
@cgrp->count so that it can continue accessing @cgrp even if the count
reached zero and destruction of the cgroup commenced.  Given that both
sides - __css_put() and cgroup_destroy_locked() - are cold paths, this
is unnecessary.  Just making cgroup_destroy_locked() grab css_set_lock
while checking @cgrp->count is enough.

Remove the RCU read locking from __put_css_set() and make
cgroup_destroy_locked() read-lock css_set_lock when checking
@cgrp->count.  This will also allow removing @cgrp->count.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2013-06-13 10:55:18 -07:00
Tejun Heo
54766d4a1d cgroup: rename CGRP_REMOVED to CGRP_DEAD
We will add another flag indicating that the cgroup is in the process
of being killed.  REMOVING / REMOVED is more difficult to distinguish
and cgroup_is_removing()/cgroup_is_removed() are a bit awkward.  Also,
later percpu_ref usage will involve "kill"ing the refcnt.

 s/CGRP_REMOVED/CGRP_DEAD/
 s/cgroup_is_removed()/cgroup_is_dead()

This patch is purely cosmetic.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2013-06-13 10:55:18 -07:00
Tejun Heo
5de0107e63 cgroup: clean up css_[try]get() and css_put()
* __css_get() isn't used by anyone.  Fold it into css_get().

* Add proper function comments to all css reference functions.

This patch is purely cosmetic.

v2: Typo fix as per Li.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2013-06-13 10:55:17 -07:00
Tejun Heo
f4f4be2bd2 cgroup: use kzalloc() instead of kmalloc()
There's no point in using kmalloc() instead of the clearing variant
for trivial stuff.  We can live dangerously elsewhere.  Use kzalloc()
instead and drop 0 inits.

While at it, do trivial code reorganization in cgroup_file_open().

This patch doesn't introduce any functional changes.

v2: I was caught in the very distant past where list_del() didn't
    poison and the initial version converted list_del()s to
    list_del_init()s too.  Li and Kent took me out of the stasis
    chamber.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Kent Overstreet <koverstreet@google.com>
Acked-by: Li Zefan <lizefan@huawei.com>
2013-06-13 10:55:17 -07:00
Tejun Heo
69d0206c79 cgroup: bring some sanity to naming around cg_cgroup_link
cgroups and css_sets are mapped M:N and this M:N mapping is
represented by struct cg_cgroup_link which forms linked lists on both
sides.  The naming around this mapping is already confusing and struct
cg_cgroup_link exacerbates the situation quite a bit.

>From cgroup side, it starts off ->css_sets and runs through
->cgrp_link_list.  From css_set side, it starts off ->cg_links and
runs through ->cg_link_list.  This is rather reversed as
cgrp_link_list is used to iterate css_sets and cg_link_list cgroups.
Also, this is the only place which is still using the confusing "cg"
for css_sets.  This patch cleans it up a bit.

* s/cgroup->css_sets/cgroup->cset_links/
  s/css_set->cg_links/css_set->cgrp_links/
  s/cgroup_iter->cg_link/cgroup_iter->cset_link/

* s/cg_cgroup_link/cgrp_cset_link/

* s/cgrp_cset_link->cg/cgrp_cset_link->cset/
  s/cgrp_cset_link->cgrp_link_list/cgrp_cset_link->cset_link/
  s/cgrp_cset_link->cg_link_list/cgrp_cset_link->cgrp_link/

* s/init_css_set_link/init_cgrp_cset_link/
  s/free_cg_links/free_cgrp_cset_links/
  s/allocate_cg_links/allocate_cgrp_cset_links/

* s/cgl[12]/link[12]/ in compare_css_sets()

* s/saved_link/tmp_link/ s/tmp/tmp_links/ and a couple similar
  adustments.

* Comment and whiteline adjustments.

After the changes, we have

	list_for_each_entry(link, &cont->cset_links, cset_link) {
		struct css_set *cset = link->cset;

instead of

	list_for_each_entry(link, &cont->css_sets, cgrp_link_list) {
		struct css_set *cset = link->cg;

This patch is purely cosmetic.

v2: Fix broken sentences in the patch description.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2013-06-13 10:55:17 -07:00
Tejun Heo
5abb885573 cgroup: consistently use @cset for struct css_set variables
cgroup.c uses @cg for most struct css_set variables, which in itself
could be a bit confusing, but made much worse by the fact that there
are places which use @cg for struct cgroup variables.
compare_css_sets() epitomizes this confusion - @[old_]cg are struct
css_set while @cg[12] are struct cgroup.

It's not like the whole deal with cgroup, css_set and cg_cgroup_link
isn't already confusing enough.  Let's give it some sanity by
uniformly using @cset for all struct css_set variables.

* s/cg/cset/ for all css_set variables.

* s/oldcg/old_cset/ s/oldcgrp/old_cgrp/.  The same for the ones
  prefixed with "new".

* s/cg/cgrp/ for cgroup variables in compare_css_sets().

* s/css/cset/ for the cgroup variable in task_cgroup_from_root().

* Whiteline adjustments.

This patch is purely cosmetic.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2013-06-13 10:55:17 -07:00
Tejun Heo
3fc3db9a3a cgroup: remove now unused css_depth()
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
2013-06-13 10:55:17 -07:00
John W. Linville
b70727e8a6 Merge branch 'for-linville-ath10k' of git://github.com/kvalo/ath6kl 2013-06-13 13:54:21 -04:00
Li Zefan
f047cecf2c cpuset: fix to migrate mm correctly in a corner case
Before moving tasks out of empty cpusets, update_tasks_nodemask()
is called, which calls do_migrate_pages(xx, from, to). Then those
tasks are moved to an ancestor, and do_migrate_pages() is called
again.

The first time: from = node_to_be_offlined, to = empty.
The second time: from = empty, to = ancestor's nodemask.

so looks like no pages will be migrated.

Fix this by:

- Don't call update_tasks_nodemask() on empty cpusets.
- Pass cs->old_mems_allowed to do_migrate_pages().

v4: added comment in cpuset_hotplug_update_tasks() and rephased comment
    in cpuset_attach().

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-13 10:51:22 -07:00
Thomas Petazzoni
5fb2038d61 arm: mvebu: disable DEBUG_LL/EARLY_PRINTK in defconfig
Now that we have two different addresses for the UART, depending on
which bootloader is used, it is no longer desirable to enable
earlyprintk by default in the defconfig. Users who need earlyprintk
support will have to enable it explicitly, and select the right UART
configuration depending on their platform.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-13 17:48:59 +00:00
Thomas Petazzoni
c2804cd694 arm: mvebu: add another earlyprintk Kconfig option
In order to support both old and new bootloaders, we add a new Kconfig
option for the earlyprintk UART selection. The existing option allows
to work with old bootloaders (that keep the internal registers mapped
at 0xd0000000), while the newly introduced option allows to work with
new bootloaders (that remap the internal registers at 0xf1000000).

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-13 17:48:52 +00:00
Thomas Petazzoni
d834d26ae2 arm: mvebu: don't hardcode the physical address for mvebu-mbus
Since the mvebu-mbus driver doesn't yet have a DT binding (and this DT
binding may not necessarily be ready for 3.11), the physical address
of the mvebu-mbus registers are currently hardcoded. This doesn't play
well with the fact that the internal registers base address may be
different depending on the bootloader.

In order to have only one central place for the physical address of
the internal registers, we now use of_translate_address() to translate
the mvebu-mbus register offsets into the real physical address, by
using DT-based address translation. This will go away once the
mvebu-mbus driver gains a proper DT binding.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-13 17:48:46 +00:00
Thomas Petazzoni
580ff0eea1 arm: mvebu: don't hardcode a physical address in headsmp.S
Now that the coherency_init() function is called a bit earlier, we can
actually read the physical address of the coherency unit registers
from the Device Tree, and communicate that to the headsmp.S code,
which avoids hardcoding a physical address.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-13 17:48:40 +00:00
Li Zefan
88fa523bff cpuset: allow to move tasks to empty cpusets
Currently some cpuset behaviors are not friendly when cpuset is co-mounted
with other cgroup controllers.

Now with this patchset if cpuset is mounted with sane_behavior option,
it behaves differently:

- Tasks will be kept in empty cpusets when hotplug happens and take
  masks of ancestors with non-empty cpus/mems, instead of being moved to
  an ancestor.

- A task can be moved into an empty cpuset, and again it takes masks of
  ancestors, so the user can drop a task into a newly created cgroup without
  having to do anything for it.

As tasks can reside in empy cpusets, here're some rules:

- They can be moved to another cpuset, regardless it's empty or not.

- Though it takes masks from ancestors, it takes other configs from the
  empty cpuset.

- If the ancestors' masks are changed, those tasks will also be updated
  to take new masks.

v2: add documentation in include/linux/cgroup.h

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-13 10:48:33 -07:00
Thomas Petazzoni
488275beda arm: mvebu: remove hardcoded static I/O mapping
Now that we have removed the need of the static I/O mapping for early
initialization reasons, and fixed the registers area length that were
broken, we can get rid of the static I/O mapping. Only the earlyprintk
mapping needs to be set up, using the debug_ll_io_init() helper
function.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-13 17:48:33 +00:00
Li Zefan
5c5cc62321 cpuset: allow to keep tasks in empty cpusets
To achieve this:

- We call update_tasks_cpumask/nodemask() for empty cpusets when
hotplug happens, instead of moving tasks out of them.

- When a cpuset's masks are changed by writing cpuset.cpus/mems,
we also update tasks in child cpusets which are empty.

v3:
- do propagation work in one place for both hotplug and unplug

v2:
- drop rcu_read_lock before calling update_task_nodemask() and
  update_task_cpumask(), instead of using workqueue.
- add documentation in include/linux/cgroup.h

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-13 10:48:32 -07:00
Li Zefan
070b57fcac cpuset: introduce effective_{cpumask|nodemask}_cpuset()
effective_cpumask_cpuset() returns an ancestor cpuset which has
non-empty cpumask.

If a cpuset is empty and the tasks in it need to update their
cpus_allowed, they take on the ancestor cpuset's cpumask.

This currently won't change any behavior, but it will later allow us
to keep tasks in empty cpusets.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-13 10:48:32 -07:00
Li Zefan
33ad801dfb cpuset: record old_mems_allowed in struct cpuset
When we update a cpuset's mems_allowed and thus update tasks'
mems_allowed, it's required to pass the old mems_allowed and new
mems_allowed to cpuset_migrate_mm().

Currently we save old mems_allowed in a temp local variable before
changing cpuset->mems_allowed. This patch changes it by saving
old mems_allowed in cpuset->old_mems_allowed.

This currently won't change any behavior, but it will later allow
us to keep tasks in empty cpusets.

v3: restored "cpuset_attach_nodemask_to = cs->mems_allowed"

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-13 10:48:32 -07:00
Thomas Petazzoni
3e0a8f2396 arm: mvebu: move cache and mvebu-mbus initialization later
Current, the L2 cache and the mvebu-mbus drivers are initialized at
->init_early() time. However, at ->init_early() time, ioremap() only
works if a static I/O mapping has already been put in place. If it's
not the case, it tries to do a memory allocation with kmalloc() which
is not possible so early at this stage of the initialization.

Since we want to get rid of the static I/O mapping, we cannot
initialize the L2 cache driver and the mvebu-mbus driver so early. So,
we move their initialization to the ->init_time() level, which is
slightly later (so ioremap() works properly), but sufficiently early
to be before the call of the ->smp_prepare_cpus() hook, which creates
an address decoding window for the BootROM, which requires the
mvebu-mbus driver to be properly initialized.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-13 17:48:26 +00:00
Thomas Petazzoni
865e0527d2 arm: mvebu: avoid hardcoded virtual address in coherency code
Now that the coherency_get_cpu_count() function no longer requires a
very early mapping of the coherency unit registers, we can avoid the
hardcoded virtual address in coherency.c. However, the coherency
features are still used quite early, so we need to do the of_iomap()
early enough, at the ->init_timer() level, so we have the call of
coherency_init() at this point.

Unfortunately, at ->init_timer() time, it is not possible to register
a bus notifier, so we add a separate coherency_late_init() function
that gets called as as postcore_initcall(), when bus notifiers are
available.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-13 17:48:20 +00:00
Thomas Petazzoni
b21dcafea3 arm: mvebu: remove dependency of SMP init on static I/O mapping
The ->smp_init_cpus() function is called very early during boot, at a
point where dynamic I/O mappings are not yet possible. However, in the
Armada 370/XP implementation of this function, we have to get the
number of CPUs. We used to do that by accessing a hardware register,
which requires relying on a static I/O mapping set up by
->map_io(). Not only this requires hardcoding a virtual address, but
it also prevents us from removing the static I/O mapping.

So this commit changes the way used to get the number of CPUs: we now
use the Device Tree, which is a representation of the hardware, and
provides us the number of available CPUs. This is also more accurate,
because it potentially allows to boot the Linux kernel on only a
number of CPUs given by the Device Tree, instead of unconditionally on
all CPUs.

As a consequence, the coherency_get_cpu_count() function becomes no
longer used, so we remove it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-13 17:48:13 +00:00
Jason Cooper
fdc0b43fbb mvebu cleanup for v3.11 (round 3)
- mvebu
     - mark functions in armada-370-xp.c as static
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRpPQMAAoJEAi3KVZQDZAe2mMH/ivHRhYK47xruZKxSQAUemMG
 a8c9sDKSZK9m4Fca5r3dsx9VaBSLZjbkFm8iykZnukiMEl5wD9gMMinCuUxY01pv
 eY2VOC40yPD0LRQYfFi0CoUxwK2NyetGvALlt3UaBj3v8lTruEjod3JExH7Nnv3h
 DbASwUcNyK9cQAaY1CMgaZTgoXygvZ1CZqU4Vcu78uTl0ob5mK9kEXsXIBdA8Pac
 Ba6ipLNl5fjsZkAUI6KDlgu4dxbMdvi/3IU+AHVpyjqjlPrvCKVeRahdUjRwJS2s
 pToGfzr0i7t5L5JB0MYQiHvxTI6mtEyePsx2wMFUBL29DafYJDrc/3s7wiwN+m0=
 =fHxJ
 -----END PGP SIGNATURE-----

Merge tag 'tags/cleanup-3.11-3' into mvebu/regmap

mvebu cleanup for v3.11 (round 3)

 - mvebu
    - mark functions in armada-370-xp.c as static
2013-06-13 17:47:57 +00:00
Jason Cooper
ad9d6156a6 mvebu fixes non-critical for v3.11 (round 1)
- mvebu
     - fix register area length in dtsi for ethernet and sata
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJRpPK5AAoJEAi3KVZQDZAeY0IH/2zCJX+nmBBw9omcrDg3lXaU
 YKrpL6d/sV1Y+gyC6Xa8OLvmOZFndwt5ePh6RRprM7wDybw5JE6inCXtLUN31f0W
 ARjX6asJkPk/NqDx8Bhs+OzI157cGHKnDOTzemE0dMVtN4dBnEApKMB2w+8pzGPK
 SirwBvHuaIf5eNdIv9Vnj/UguMH7UKuPb7xKnq52FavkRcHWXXJNIDEibzwOOoBG
 KRjk1yBL3Spva51UwZ2Mgv+8J71y5KOGBUjEIHbVwcxl7lPQ37fP1yWDlreG0qdV
 xDTiB1wwfg8/IH/M+2z0AAKK4s/ngfLujZZZsHL9HrTudstThEaTi9T6scLtqOM=
 =BmX7
 -----END PGP SIGNATURE-----

Merge tag 'tags/fixes-non-3.11-1' into mvebu/regmap

mvebu fixes non-critical for v3.11 (round 1)

 - mvebu
    - fix register area length in dtsi for ethernet and sata
2013-06-13 17:47:18 +00:00
John W. Linville
3100cdd8bf Merge branch 'for-linville' of git://github.com/kvalo/ath6kl 2013-06-13 13:33:39 -04:00
Sujith Manoharan
fca97d763d ath9k: Fix ANI trigger threshold
Since raising/lowering the limits based on INI has
been changed, the error limit for OFDM has to be 1000,
not 3500.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-13 13:32:29 -04:00
Christian Lamparter
9ad86ed39d carl9170: add support for the new rate control API
With the new rate control API, the driver can now apply the
tx rate to outgoing frames just before they are uploaded to
the device. This is important because the rate control can
now react to fading or improving links a bit sooner.

Also, the driver no longer needs to sort the outgoing frames
for sample attempts (which affected the size of A-MPDUs and
the throughput of the link). For aggregated data frames, the
driver (and rate control) needs only to calculate and apply
a single set of tx rates to every subframe of the whole
aggregate.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-13 13:32:28 -04:00