[ Upstream commit 41b37312bd ]
pqi_report_phys_luns() fails to release the rpl_list buffer when
encountering an unsupported data format or when the allocation for
rpl_16byte_wwid_list fails. These early returns bypass the cleanup logic,
leading to memory leaks.
Consolidate the error handling by adding an out_free_rpl_list label and use
goto statements to ensure rpl_list is consistently freed on failure.
Compile tested only. Issue found using a prototype static analysis tool and
code review.
Fixes: 28ca6d876c ("scsi: smartpqi: Add extended report physical LUNs")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Tested-by: Don Brace <don.brace@microchip.com>
Acked-by: Don Brace <don.brace@microchip.com>
Link: https://patch.msgid.link/20260131093641.1008117-1-zilin@seu.edu.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5248d8474e ]
It is possible to have a task get stuck on waiting on the
NFS_LAYOUT_DRAIN in the following scenario
1. cpu a: waiter test NFS_LAYOUT_DRAIN (1) and plh_outstanding (1)
2. cpu b: atomic_dec_and_test() -> clear bit -> wake up
3. cpu c: sets NFS_LAYOUT_DRAIN again
4. cpu a: calls wait_on_bit() sleeps forever.
To expand on this we have say 2 outstanding pnfs write IO that get
ESTALE which causes both to call pnfs_destroy_layout() and set the
NFS_LAYOUT_DRAIN bit but the 1st one doesn't call the
pnfs_put_layout_hdr() yet (as that would prevent the 2nd ESTALE write
from trying to call pnfs_destroy_layout()). If the 1st ESTALE write
is the one that initially sets the NFS_LAYOUT_DRAIN so that new IO
on this file initiates new LAYOUTGET. Another new write would find
NFS_LAYOUT_DRAIN set and phl_outstanding>0 (step 1) and would
wait_on_bit(). LAYOUTGET completes doing step 2. Now, the 2nd of
ESTALE writes is calling pnfs_destory_layout() and set the
NFS_LAYOUT_DRAIN bit (step 3). Finally, the waiting write wakes up
to check the bit and goes back to sleep.
The problem revolves around the fact that if NFS_LAYOUT_INVALID_STID
was already set, it should not do the work of
pnfs_mark_layout_stateid_invalid(), thus NFS_LAYOUT_DRAIN will not
be set more than once for an invalid layout.
Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Fixes: 880265c77a ("pNFS: Avoid a live lock condition in pnfs_update_layout()")
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58b604dfc7 ]
Since wqe_size in ib_uverbs_unmarshall_recv() is user-provided and already
validated, but can still be large, add __GFP_NOWARN to suppress memory
allocation warnings for large sizes, consistent with the similar fix in
ib_uverbs_post_send().
Fixes: 67cdb40ca4 ("[IB] uverbs: Implement more commands")
Signed-off-by: Yi Liu <liuy22@mails.tsinghua.edu.cn>
Link: https://patch.msgid.link/20260129094900.3517706-1-liuy22@mails.tsinghua.edu.cn
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c655f45480 ]
On the Dell Latitude 7455, the firmware uses "LiP" with a lowercase 'i'
for the battery chemistry type, but only all-uppercase "LIP" was being
recognized. Add the CamelCase variant to the check to fix the "Unknown
battery technology" warning.
Fixes: 202ac22b8e ("power: supply: qcom_battmgr: Add lithium-polymer entry")
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260120235831.479038-1-val@packett.cool
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2306725991 ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `extcon` handle, means that the
`extcon` handle will be deallocated/unregistered _before_ the interrupt
handler (since `devm_` naturally deallocates in reverse allocation
order). This means that during removal, there is a race condition where
an interrupt can fire just _after_ the `extcon` handle has been
freed, *but* just _before_ the corresponding unregistration of the IRQ
handler has run.
This will lead to the IRQ handler calling `extcon_set_state_sync()` with
a freed `extcon` handle. Which usually crashes the system or otherwise
silently corrupts the memory...
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `extcon` handle.
Fixes: f8d7a3d211 ("power: supply: Add driver for pm8916 lbc")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://patch.msgid.link/e2a4cd2fcd42b6cd97d856c17c097289a2aed393.1769163273.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a57b1f07d2 ]
The @data buffer is 5 bytes, not 4, it has been extended for the need of
devices with an extra ID bytes.
Fixes: 34a956739d ("mtd: spinand: Add support for 5-byte IDs")
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cce81df7d ]
of_get_child_by_name() returns a node pointer with refcount incremented,
which must be released with of_node_put() when done. However, in
parse_fixed_partitions(), when dedicated is true (i.e., a "partitions"
subnode was found), the ofpart_node obtained from of_get_child_by_name()
is never released on any code path.
Add of_node_put(ofpart_node) calls on all exit paths when dedicated is
true to fix the reference count leak.
This bug was detected by our static analysis tool.
Fixes: 562b4e91d3 ("mtd: parsers: ofpart: fix parsing subpartitions")
Signed-off-by: Weigang He <geoffreyhe2@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b6f9d9b1e ]
In cxl_decoder_commit(), commit_end is incremented before verifying
whether the commit succeeded, and the CXL_DECODER_F_ENABLE bit in
cxld->flags is only set after a successful commit. As a result, if the
commit fails, commit_end has been incremented and cxld->reset() has no
effect since the flag is not set, so commit_end remains incorrectly
incremented. The inconsistency between commit_end and CXL_DECODER_F_ENABLE
causes failure during subsequent either commit or reset operations.
Fix this by incrementing commit_end only after confirming the commit
succeeded. Also, remove the ineffective cxld->reset() call. According to
CXL Spec r4.0 8.2.4.20.12 Committing Decoder Programming, since
cxld_await_commit() has cleared the decoder commit bit on failure, no
additional reset is required.
[dj: Fixed commit log 80 char wrapping. ]
[dj: Fix "Fixes" tag to correct hash length. ]
[dj: Change spec to r4.0. ]
Fixes: 176baefb2e ("cxl/hdm: Commit decoder state to hardware")
Signed-off-by: Yuxiong Wang <yuxiong.wang@linux.alibaba.com>
Acked-by: Huang Ying <ying.huang@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260129064552.31180-1-yuxiong.wang@linux.alibaba.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afcae7d7b8 ]
svc_rdma_accept() computes sc_sq_depth as the sum of rq_depth and the
number of rdma_rw contexts (ctxts). This value is used to allocate the
Send CQ and to initialize the sc_sq_avail credit pool.
However, when the device uses memory registration for RDMA operations,
rdma_rw_init_qp() inflates the QP's max_send_wr by a factor of three
per context to account for REG and INV work requests. The Send CQ and
credit pool remain sized for only one work request per context,
causing Send Queue exhaustion under heavy NFS WRITE workloads.
Introduce rdma_rw_max_sge() to compute the actual number of Send Queue
entries required for a given number of rdma_rw contexts. Upper layer
protocols call this helper before creating a Queue Pair so that their
Send CQs and credit accounting match the QP's true capacity.
Update svc_rdma_accept() to use rdma_rw_max_sge() when computing
sc_sq_depth, ensuring the credit pool reflects the work requests
that rdma_rw_init_qp() will reserve.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 00bd1439f4 ("RDMA/rw: Support threshold for registration vs scattering to local pages")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260128005400.25147-5-cel@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87bf646921 ]
I encontered the following warning:
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:249 at rxe_sched_task+0x1c8/0x238 [rdma_rxe], CPU#0: swapper/0/0
...
libsha1 [last unloaded: ip6_udp_tunnel]
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G C 6.19.0-rc5-64k-v8+ #37 PREEMPT
Tainted: [C]=CRAP
Hardware name: Raspberry Pi 4 Model B Rev 1.2
Call trace:
rxe_sched_task+0x1c8/0x238 [rdma_rxe] (P)
retransmit_timer+0x130/0x188 [rdma_rxe]
call_timer_fn+0x68/0x4d0
__run_timers+0x630/0x888
...
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:38 at rxe_sched_task+0x1c0/0x238 [rdma_rxe], CPU#0: swapper/0/0
...
WARNING: drivers/infiniband/sw/rxe/rxe_task.c:111 at do_work+0x488/0x5c8 [rdma_rxe], CPU#3: kworker/u17:4/93400
...
refcount_t: underflow; use-after-free.
WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x138/0x1a0, CPU#3: kworker/u17:4/93400
The issue is caused by a race condition between retransmit_timer() and
rxe_destroy_qp, leading to the Queue Pair's (QP) reference count dropping
to zero during timer handler execution.
It seems this warning is harmless because rxe_qp_do_cleanup() will flush
all pending timers and requests.
Example of flow causing the issue:
CPU0 CPU1
retransmit_timer() {
spin_lock_irqsave
rxe_destroy_qp()
__rxe_cleanup()
__rxe_put() // qp->ref_count decrease to 0
rxe_qp_do_cleanup() {
if (qp->valid) {
rxe_sched_task() {
WARN_ON(rxe_read(task->qp) <= 0);
}
}
spin_unlock_irqrestore
}
spin_lock_irqsave
qp->valid = 0
spin_unlock_irqrestore
}
Ensure the QP's reference count is maintained and its validity is checked
within the timer callbacks by adding calls to rxe_get(qp) and corresponding
rxe_put(qp) after use.
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Fixes: d946716325 ("RDMA/rxe: Rewrite rxe_task.c")
Link: https://patch.msgid.link/20260120074437.623018-1-lizhijian@fujitsu.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b9d253908 ]
The UVERBS_HANDLER(MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH) function
allocates memory for the device path using kobject_get_path(). If the
length of the device path exceeds the output buffer length, the function
returns -ENOSPC but does not free the allocated memory, resulting in a
memory leak.
Add a kfree() call to the error path to ensure the allocated memory is
properly freed.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: ec7ad65309 ("RDMA/mlx5: Introduce GET_DATA_DIRECT_SYSFS_PATH ioctl")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20260126074801.627898-1-zilin@seu.edu.cn
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1956f0a74c ]
ib_uverbs_post_send() uses cmd.wqe_size from userspace without any
validation before passing it to kmalloc() and using the allocated
buffer as struct ib_uverbs_send_wr.
If a user provides a small wqe_size value (e.g., 1), kmalloc() will
succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge,
and other fields will read beyond the allocated buffer, resulting in
an out-of-bounds read from kernel heap memory. This could potentially
leak sensitive kernel information to userspace.
Additionally, providing an excessively large wqe_size can trigger a
WARNING in the memory allocation path, as reported by syzkaller.
This is inconsistent with ib_uverbs_unmarshall_recv() which properly
validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before
proceeding.
Add the same validation for ib_uverbs_post_send() to ensure wqe_size
is at least sizeof(struct ib_uverbs_send_wr).
Fixes: c3bea3d2dc ("RDMA/uverbs: Use the iterator for ib_uverbs_unmarshall_recv()")
Signed-off-by: Yi Liu <liuy22@mails.tsinghua.edu.cn>
Link: https://patch.msgid.link/20260122142900.2356276-2-liuy22@mails.tsinghua.edu.cn
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bb0060f78 ]
nfslocaliod_workqueue is a non-memreclaim workqueue (it isn't
initialized with WQ_MEM_RECLAIM), see commit b9f5dd57f4
("nfs/localio: use dedicated workqueues for filesystem read and
write").
Use nfslocaliod_workqueue for LOCALIO's SYNC work.
Also, set PF_LOCAL_THROTTLE | PF_MEMALLOC_NOIO in
nfs_local_fsync_work.
Fixes: b9f5dd57f4 ("nfs/localio: use dedicated workqueues for filesystem read and write")
Signed-off-by: Mike Snitzer <snitzer@hammerspace.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 894f5c5593 ]
nfs_local_commit() doesn't need async cleanup of nfs_local_fsync_ctx,
so there is no need to use a kref.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: 9bb0060f78 ("NFS/localio: use GFP_NOIO and non-memreclaim workqueue in nfs_local_commit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 980ce2b02d ]
The function mtd_parser_tplink_safeloader_parse() allocates buf via
mtd_parser_tplink_safeloader_read_table(). If the allocation for
parts[idx].name fails inside the loop, the code jumps to the err_free
label without freeing buf, leading to a memory leak.
Fix this by freeing the temporary buffer buf in the err_free label.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 00a3588084 ("mtd: parsers: add TP-Link SafeLoader partitions table parser")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7b85137caf ]
The hibernate resume sequence involves loading a resume kernel that is just
used for loading the hibernate image before shifting back to the existing
kernel.
During that hibernate resume sequence the resume kernel may have loaded
the ccp driver. If this happens the resume kernel will also have called
PSP_CMD_TEE_RING_INIT but it will never have called
PSP_CMD_TEE_RING_DESTROY.
This is problematic because the existing kernel needs to re-initialize the
ring. One could argue that the existing kernel should call destroy
as part of restore() but there is no guarantee that the resume kernel did
or didn't load the ccp driver. There is also no callback opportunity for
the resume kernel to destroy before handing back control to the existing
kernel.
Similar problems could potentially exist with the use of kdump and
crash handling. I actually reproduced this issue like this:
1) rmmod ccp
2) hibernate the system
3) resume the system
4) modprobe ccp
The resume kernel will have loaded ccp but never destroyed and then when
I try to modprobe it fails.
Because of these possible cases add a flow that checks the error code from
the PSP_CMD_TEE_RING_INIT call and tries to call PSP_CMD_TEE_RING_DESTROY
if it failed. If this succeeds then call PSP_CMD_TEE_RING_INIT again.
Fixes: f892a21f51 ("crypto: ccp - use generic power management")
Reported-by: Lars Francke <lars.francke@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/CAD-Ua_gfJnQSo8ucS_7ZwzuhoBRJ14zXP7s8b-zX3ZcxcyWePw@mail.gmail.com/
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260116041132.153674-6-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d95f87a65b ]
The ring destroy command needs to be used in multiple places. Split
out the code to a helper.
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260116041132.153674-5-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 7b85137caf ("crypto: ccp - Send PSP_CMD_TEE_RING_DESTROY when PSP_CMD_TEE_RING_INIT fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e599d7871 ]
tee_init_ring() only declares PSP dead if the command times out.
If there is any other failure it is still considered fatal though.
Set psp_dead for other failures as well.
Fixes: 949a0c8dd3 ("crypto: ccp - Move direct access to some PSP registers out of TEE")
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260116041132.153674-3-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48d229c704 ]
After resuming from hibernate, TEE commands can time out and cause PSP
disables. Fix this by reinitializing the Trusted Application (TA) and
cancelling the pb workqueue in the hibernate callbacks to avoid these
errors.
ccp 0000:c4:00.2: tee: command 0x5 timed out, disabling PSP
amd-pmf AMDI0107:00: TEE enact cmd failed. err: ffff000e, ret:0
amd-pmf AMDI0107:00: TEE enact cmd failed. err: ffff000e, ret:0
amd-pmf AMDI0107:00: TEE enact cmd failed. err: ffff000e, ret:0
Fixes: ae82cef7d9 ("platform/x86/amd/pmf: Add support for PMF-TA interaction")
Reported-by: Lars Francke <lars.francke@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/CAD-Ua_gfJnQSo8ucS_7ZwzuhoBRJ14zXP7s8b-zX3ZcxcyWePw@mail.gmail.com/
Tested-by: Yijun Shen <Yijun.Shen@Dell.com>
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
[ML: Add more tags]
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260116041132.153674-2-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 962ae6892d ]
The commit 7e89efc6e9 ("Lock upstream bridge for pci_reset_function()")
added locking of the upstream bridge to the reset function. To catch
paths that are not properly locked, the commit 920f646892 ("Warn on
missing cfg_access_lock during secondary bus reset") added a warning
if the PCI configuration space was not locked during a secondary bus reset
request.
When a VFIO PCI device is released from userspace ownership, an attempt
to reset the PCI device function may be made. If so, and the upstream bridge
is not locked, the release request results in a warning:
pcieport 0000:00:00.0: unlocked secondary bus reset via:
pci_reset_bus_function+0x188/0x1b8
Add missing upstream bridge locking to vfio_pci_core_disable().
Fixes: 7e89efc6e9 ("PCI: Lock upstream bridge for pci_reset_function()")
Signed-off-by: Anthony Pighin <anthony.pighin@nokia.com>
Link: https://lore.kernel.org/r/BN0PR08MB695171D3AB759C65B6438B5D838DA@BN0PR08MB6951.namprd08.prod.outlook.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d8226cbbf ]
cadence_nand_cdma_send_and_wait() propagates negative errno values
from cadence_nand_cdma_send(), returns -ETIMEDOUT on failure and -EIO
when the CDMA engine reports a command failure.
However, it is declared as u32, causing error codes to wrap.
Change the return type to int to correctly propagate errors.
Fixes: ec4ba01e89 ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18ea78e2ae ]
When querying speed information for a representor in switchdev mode,
the code previously used the first device in the eswitch, which may not
match the device that actually owns the representor. In setups such as
multi-port eswitch or LAG, this led to incorrect port attributes being
reported.
Fix this by retrieving the correct core device from the representor's
eswitch before querying its port attributes.
Fixes: 27f9e0ccb6 ("net/mlx5: Lag, Add single RDMA device in multiport mode")
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260115-port-speed-query-fix-v2-1-3bde6a3c78e7@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebc2164a4c ]
During firmware reset in LAG mode, a race condition causes the driver
to hang indefinitely while waiting for UMR completion during device
unload. See [1].
In LAG mode the bond device is only registered on the master, so it
never sees sys_error events from the slave.
During firmware reset this causes UMR waits to hang forever on unload
as the slave is dead but the master hasn't entered error state yet, so
UMR posts succeed but completions never arrive.
Fix this by adding a sys_error notifier that gets registered before
MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device().
This ensures error events reach the bond device throughout teardown.
[1]
Call Trace:
__schedule+0x2bd/0x760
schedule+0x37/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.isra.6+0x2b5/0x4a0
__mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib]
? __xa_erase+0x4a/0xa0
? _cond_resched+0x15/0x30
? wait_for_completion+0x31/0x100
ib_dereg_mr_user+0x48/0xc0 [ib_core]
? rdmacg_uncharge_hierarchy+0xa0/0x100
destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x37/0x150 [ib_uverbs]
__uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs]
uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs]
ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
remove_client_context+0x8b/0xd0 [ib_core]
disable_device+0x8c/0x130 [ib_core]
__ib_unregister_device+0x10d/0x180 [ib_core]
ib_unregister_device+0x21/0x30 [ib_core]
__mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib]
auxiliary_bus_remove+0x1e/0x30
device_release_driver_internal+0x103/0x1f0
bus_remove_device+0xf7/0x170
device_del+0x181/0x410
mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core]
mlx5_disable_lag+0x253/0x260 [mlx5_core]
mlx5_lag_disable_change+0x89/0xc0 [mlx5_core]
mlx5_eswitch_disable+0x67/0xa0 [mlx5_core]
mlx5_unload+0x15/0xd0 [mlx5_core]
mlx5_unload_one+0x71/0xc0 [mlx5_core]
mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core]
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x116/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x22/0x40
Fixes: ede132a5cf ("RDMA/mlx5: Move events notifier registration to be after device registration")
Signed-off-by: Chiara Meiohas <cmeiohas@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260113-umr-hand-lag-fix-v1-1-3dc476e00cd9@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56c17ee151 ]
The file descriptor opened in isolate_cpus() when (!level) is true was
not being closed before returning, causing a file descriptor leak in
both the error path and the success path.
When write() fails at line 950, the function returns at line 953 without
closing the file descriptor. Similarly, on success, the function returns
at line 956 without closing the file descriptor.
Add close(fd) calls before both return statements to fix the resource
leak. This follows the same pattern used elsewhere in the same function
where file descriptors are properly closed before returning (see lines
1005 and 1027).
Fixes: 997074df65 ("tools/power/x86/intel-speed-select: Use cgroup v2 isolation")
Signed-off-by: Malaya Kumar Rout <mrout@redhat.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7874eeacfa ]
The commit e1168f0 ("RDMA/iwcm: Simplify cm_event_handler()")
changed the work submission logic to unconditionally call
queue_work() with the expectation that queue_work() would
have no effect if work was already pending. The problem is
that a free list of struct iwcm_work is used (for which
struct work_struct is embedded), so each call to queue_work()
is basically unique and therefore does indeed queue the work.
This causes a problem in the work handler which walks the work_list
until it's empty to process entries. This means that a single
run of the work handler could process item N+1 and release it
back to the free list while the actual workqueue entry is still
queued. It could then get reused (INIT_WORK...) and lead to
list corruption in the workqueue logic.
Fix this by just removing the work_list. The workqueue already
does this for us.
This fixes the following error that was observed when stress
testing with ucmatose on an Intel E830 in iWARP mode:
[ 151.465780] list_del corruption. next->prev should be ffff9f0915c69c08, but was ffff9f0a1116be08. (next=ffff9f0a15b11c08)
[ 151.466639] ------------[ cut here ]------------
[ 151.466986] kernel BUG at lib/list_debug.c:67!
[ 151.467349] Oops: invalid opcode: 0000 [#1] SMP NOPTI
[ 151.467753] CPU: 14 UID: 0 PID: 2306 Comm: kworker/u64:18 Not tainted 6.19.0-rc4+ #1 PREEMPT(voluntary)
[ 151.468466] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 151.469192] Workqueue: 0x0 (iw_cm_wq)
[ 151.469478] RIP: 0010:__list_del_entry_valid_or_report+0xf0/0x100
[ 151.469942] Code: c7 58 5f 4c b2 e8 10 50 aa ff 0f 0b 48 89 ef e8 36 57 cb ff 48 8b 55 08 48 89 e9 48 89 de 48 c7 c7 a8 5f 4c b2 e8 f0 4f aa ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90
[ 151.471323] RSP: 0000:ffffb15644e7bd68 EFLAGS: 00010046
[ 151.471712] RAX: 000000000000006d RBX: ffff9f0915c69c08 RCX: 0000000000000027
[ 151.472243] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f0a37d9c600
[ 151.472768] RBP: ffff9f0a15b11c08 R08: 0000000000000000 R09: c0000000ffff7fff
[ 151.473294] R10: 0000000000000001 R11: ffffb15644e7bba8 R12: ffff9f092339ee68
[ 151.473817] R13: ffff9f0900059c28 R14: ffff9f092339ee78 R15: 0000000000000000
[ 151.474344] FS: 0000000000000000(0000) GS:ffff9f0a847b5000(0000) knlGS:0000000000000000
[ 151.474934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 151.475362] CR2: 0000559e233a9088 CR3: 000000020296b004 CR4: 0000000000770ef0
[ 151.475895] PKRU: 55555554
[ 151.476118] Call Trace:
[ 151.476331] <TASK>
[ 151.476497] move_linked_works+0x49/0xa0
[ 151.476792] __pwq_activate_work.isra.46+0x2f/0xa0
[ 151.477151] pwq_dec_nr_in_flight+0x1e0/0x2f0
[ 151.477479] process_scheduled_works+0x1c8/0x410
[ 151.477823] worker_thread+0x125/0x260
[ 151.478108] ? __pfx_worker_thread+0x10/0x10
[ 151.478430] kthread+0xfe/0x240
[ 151.478671] ? __pfx_kthread+0x10/0x10
[ 151.478955] ? __pfx_kthread+0x10/0x10
[ 151.479240] ret_from_fork+0x208/0x270
[ 151.479523] ? __pfx_kthread+0x10/0x10
[ 151.479806] ret_from_fork_asm+0x1a/0x30
[ 151.480103] </TASK>
Fixes: e1168f09b3 ("RDMA/iwcm: Simplify cm_event_handler()")
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260112020006.1352438-1-jmoroni@google.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0beefd0e15 ]
In rxe_srq_from_init(), the queue pointer 'q' is assigned to
'srq->rq.queue' before copying the SRQ number to user space.
If copy_to_user() fails, the function calls rxe_queue_cleanup()
to free the queue, but leaves the now-invalid pointer in
'srq->rq.queue'.
The caller of rxe_srq_from_init() (rxe_create_srq) eventually
calls rxe_srq_cleanup() upon receiving the error, which triggers
a second rxe_queue_cleanup() on the same memory, leading to a
double free.
The call trace looks like this:
kmem_cache_free+0x.../0x...
rxe_queue_cleanup+0x1a/0x30 [rdma_rxe]
rxe_srq_cleanup+0x42/0x60 [rdma_rxe]
rxe_elem_release+0x31/0x70 [rdma_rxe]
rxe_create_srq+0x12b/0x1a0 [rdma_rxe]
ib_create_srq_user+0x9a/0x150 [ib_core]
Fix this by moving 'srq->rq.queue = q' after copy_to_user.
Fixes: aae0484e15 ("IB/rxe: avoid srq memory leak")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://patch.msgid.link/20260112015412.29458-1-jiashengjiangcool@gmail.com
Reviewed-by: Zhu Yanjun <yanjun.Zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83835f7c07 ]
This fixes the following error on the server side:
RTRS server session allocation failed: -EINVAL
caused by the caller of the `ib_dma_map_sg()`, which does not expect
less mapped entries, than requested, which is in the order of things
and can be easily reproduced on the machine with enabled IOMMU.
The fix is to treat any positive number of mapped sg entries as a
successful mapping and cache DMA addresses by traversing modified
SG table.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Roman Penyaev <r.peniaev@gmail.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Grzegorz Prajsner <grzegorz.prajsner@ionos.com>
Link: https://patch.msgid.link/20260107161517.56357-2-haris.iqbal@ionos.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39fe0eac6d ]
In `probe()`, `request_irq()` is called before allocating/registering a
`power_supply` handle. If an interrupt is fired between the call to
`request_irq()` and `power_supply_register()`, the `power_supply` handle
will be used uninitialized in `power_supply_changed()` in
`wm97xx_bat_update()` (triggered from the interrupt handler). This will
lead to a `NULL` pointer dereference since
Fix this racy `NULL` pointer dereference by making sure the IRQ is
requested _after_ the registration of the `power_supply` handle. Since
the IRQ is the last thing requests in the `probe()` now, remove the
error path for freeing it. Instead add one for unregistering the
`power_supply` handle when IRQ request fails.
Fixes: 7c87942aef ("wm97xx_battery: Use irq to detect charger state")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/97b55f0479a932eea7213844bf66f28a974e27a2.1766270196.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 688364a116 ]
bq27xxx_write(), bq27xxx_read_block(), and bq27xxx_write_block()
return -EPERM when the bus callback pointer is NULL. A NULL callback
indicates the operation is not supported by the bus/driver,
not that permission is denied.
Return -EOPNOTSUPP instead of -EPERM when di->bus.write/
read_bulk/write_bulk is NULL.
Fixes: 14073f6614 ("power: supply: bq27xxx: Add bulk transfer bus methods")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Matt Ranostay <matt@ranostay.sg>
Link: https://patch.msgid.link/20251204083436.1367-1-vulab@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36b0562922 ]
Some platforms expose reboot mode cells that are smaller than an
unsigned int, in which cases lead to write failures. Read the cell
first to determine actual size and only write the number of bytes the
cell can hold.
Fixes: 7a78a7f769 ("power: reset: nvmem-reboot-mode: use NVMEM as reboot mode write interface")
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Link: https://patch.msgid.link/20251214191529.2470580-1-akoskovich@pm.me
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d59cf3887 ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. Keep the old behavior of
just printing a warning in case of any failures during the IRQ request
and finishing the probe successfully.
Fixes: d2cec82c28 ("power: sbs-battery: Request threaded irq and fix dev callback cookie")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Phil Reid <preid@electromag.com.au>
Link: https://patch.msgid.link/0ef896e002495e615157b482d18a437af19ddcd0.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2febe375e ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: e86d69dd78 ("power_supply: Add support for Richtek RT9455 battery charger")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/1567d831e04c3e2fcb9e18dd36b7bcba4634581a.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b750812997 ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: f8d7a3d211 ("power: supply: Add driver for pm8916 lbc")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://patch.msgid.link/64d8dd3675a4e59fa32c3e0ef451f12d1f7ed18f.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62914959b3 ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 098bce1838 ("power: supply: Add pm8916 VM-BMS support")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://patch.msgid.link/2749c09ff81fcac87ae48147e216135450d8c067.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2ce982e2e ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 84d7b76874 ("power: Add battery driver for goldfish emulator")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/500a606bb6fb6f2bb8d797e19a00cea9dd7b03c1.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 642f33e34b ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 874b2adbed ("power: supply: cpcap-battery: Add a battery driver")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/81db58d610c9a51a68184f856cd431a934cccee2.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f0b1cb419 ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 5069185fc1 ("power: supply: bq25980: Add support for the BQ259xx family")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/8763035cadb959e14787b3837f2d3db61f6e1c34.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8005843369 ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: 32e4978bb9 ("power: supply: bq256xx: Introduce the BQ256XX charger driver")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/39da6da8cc060fa0382ca859f65071e791cb6119.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3291c51d46 ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle.
Fixes: a09209acd6 ("power: supply: act8945a_charger: Add status change update support")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Link: https://patch.msgid.link/bcf3a23b5187df0bba54a8c8fe09f8b8a0031dee.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4af8a98bb ]
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Commit 1c1f13a006 ("power: supply: ab8500: Move to componentized
binding") introduced this issue during a refactorization. Fix this racy
use-after-free by making sure the IRQ is requested _after_ the
registration of the `power_supply` handle.
Fixes: 1c1f13a006 ("power: supply: ab8500: Move to componentized binding")
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/ccf83a09942cb8dda3dff70b2682f2c2e9cb97f2.1766268280.git.waqar.hameed@axis.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0789f92990 ]
During a reset, software-generated WCs cannot be reported via
interrupts. This may cause the ULP to miss some WCs.
To avoid this, add check in the CQ arm process: if a hardware reset
has occurred and there are still unreported soft-WCs, notify the ULP
to handle the remaining WCs, thereby preventing any loss of completions.
Fixes: 626903e935 ("RDMA/hns: Add support for reporting wc as software mode")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84bd5d60f0 ]
DSCP is not supported in RoCEv1, but get_dscp() is still called. If
get_dscp() returns an error, it'll eventually cause create_ah to fail
even when using RoCEv1.
Correct the return value and avoid calling get_dscp() when using
RoCEv1.
Fixes: ee20cc17e9 ("RDMA/hns: Support DSCP")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260104064057.1582216-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddd6c8c873 ]
Some HCAs (e.g: ConnectX4) do not trigger a IB_EVENT_GID_CHANGE on
subnet prefix update from SM (PortInfo).
Since the commit d58c23c925 ("IB/core: Only update PKEY and GID caches
on respective events"), the GID cache is updated exclusively on
IB_EVENT_GID_CHANGE. If this event is not emitted, the subnet prefix in the
IPoIB interface’s hardware address remains set to its default value
(0xfe80000000000000).
Then rdma_bind_addr() failed because it relies on hardware address to
find the port GID (subnet_prefix + port GUID).
This patch fixes this issue by updating the GID cache on
IB_EVENT_CLIENT_REREGISTER event (emitted on PortInfo::ClientReregister=1).
Fixes: d58c23c925 ("IB/core: Only update PKEY and GID caches on respective events")
Signed-off-by: Etienne AUJAMES <eaujames@ddn.com>
Link: https://patch.msgid.link/aVUfsO58QIDn5bGX@eaujamesFR0130
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3572bdc3a ]
As rkey had been initialized to zero, the WARN_ON_ONCE should never been
triggered. Remove it.
Fixes: 9cb8374804 ("RDMA/rtrs: server: main functionality")
Signed-off-by: Honggang LI <honggangli@163.com>
Link: https://patch.msgid.link/20251224023819.138846-1-honggangli@163.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdb1634de3 ]
Running ethtool repeatedly with a transceiver unknown to the driver or
firmware will cause the driver to spam the kernel logs with "unknown
xcvr type" messages which can distract from real issues; and this isn't
interesting information outside of debugging. Fix this by rate limiting
the output so that there are still notifications but not so many that
they flood the log.
Using dev_dbg_once() would reduce the number of messages further, but
this would miss the case where a different unknown transceiver type is
plugged in, and its status is requested.
Fixes: 4d03e00a21 ("ionic: Add initial ethtool support")
Signed-off-by: Eric Joyner <eric.joyner@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260206224651.1491-1-eric.joyner@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 484e834d53 ]
Make sure the OUT DBELL base address reflects the
latest values written to it.
Fix:
Add a wait until the OUT DBELL base address register
is updated with the DMA ring descriptor address,
and modify the setup_oq function to properly
handle failures.
Fixes: 2c0c32c72b ("octeon_ep_vf: add hardware configuration APIs")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260206111510.1045092-4-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce8fe3fc4f ]
Make sure the OUT DBELL base address reflects the
latest values written to it.
Fix:
Add a wait until the OUT DBELL base address register
is updated with the DMA ring descriptor address,
and modify the setup_oq function to properly
handle failures.
Fixes: 0807dc76f3 ("octeon_ep: support Octeon CN10K devices")
Signed-off-by: Sathesh Edara <sedara@marvell.com>
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: Vimlesh Kumar <vimleshk@marvell.com>
Link: https://patch.msgid.link/20260206111510.1045092-3-vimleshk@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
