This will allow to read the table once, and not any time the command is
sent. The actual use of this will be in a later patch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.61801b78a2cb.I710a766888f370a75b47116fec29d41c106b13ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This will now be called from another opmode we are writing.
iwl_fill_lari_config will only be used for the older ones.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.9bb7fbc592a6.I8850691eac7c8471257f3031e8c05905afc72f70@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case the BIOS allows it, instruct the firmware to use the external 32
KHz clock.
The op mode specific implementation (i.e. reading the BIOS table) will
come in a later patch.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.9aae3f74fee0.I25ae45ef02b9ea387b512f974c1f3e5367a537e5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove the version suffix from the latest version of the range
request command structs and the range response notification structs.
In addition, don't use MVM in the API file as it is not MVM specific.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212073923.294b7109e0be.I229ceef5933e825815d84c33855cadd62687ee04@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This information is exposed to userspace but not drivers. Make this
field public so that drivers are also able to access it. The information
is for example useful for link selection to determine whether the BSS
corresponding to an MLO link has been seen in a recent scan.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250212082137.b682ee7aebc8.I0f7cca9effa2b1cee79f4f2eb8b549c99b4e0571@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since the new_metric and last_hop_metric variables can reach
the MAX_METRIC(0xffffffff) value, an integer overflow may occur
when multiplying them by 10/9. It can lead to incorrect behavior.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: a8d418d9ac ("mac80211: mesh: only switch path when new metric is at least 10% better")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Link: https://patch.msgid.link/20250212082124.4078236-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix a possible integer promotion issue in mac80211 in ieee80211_ml_epcs()
Fixes: de86c5f608 ("wifi: mac80211: Add support for EPCS configuration")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20250214074721.1613549-1-ilan.peer@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20250219203240.141272-1-eahariha@linux.microsoft.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Count open monitor interfaces regardless of the monitor interface type.
The new counter virt_monitors takes over counting interfaces depending
on the virtual monitor interface while monitors is used for all active
monitor interfaces.
This fixes monitor packet mirroring when using MONITOR_FLAG_ACTIVE or
NO_VIRTUAL_MONITOR interfaces.
Fixes: 286e696770 ("wifi: mac80211: Drop cooked monitor support")
Reported-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Closes: https://lore.kernel.org/r/cc715114-4e3b-619a-49dc-a4878075e1dc@quicinc.com
Signed-off-by: Alexander Wetzel <Alexander@wetzel-home.de>
Tested-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250220094139.61459-1-Alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The reference to il_rate_mcs is inside of an #ifdef, causing a W=1 warning:
drivers/net/wireless/intel/iwlegacy/4965-rs.c:189:38: error: unused variable 'il_rate_mcs' [-Werror,-Wunused-const-variable]
static const struct il_rate_mcs_info il_rate_mcs[RATE_COUNT] = {
Replace the #ifdef with a PTR_IF() for better compile time analysis.
The dead code will still get eliminated, but the warning goes away.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250225145359.1126786-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Major changes are listed below:
rtw88:
* preparation to support RTL8814AU
rtw89:
* switch using wiphy_lock and wiphy_work
* add BB context to manipulate two PHY as preparation of MLO
* improve BT-coexistence mechanism to play A2DP smoothly
* firmware file can contain regd table
-----BEGIN PGP SIGNATURE-----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=arTU
-----END PGP SIGNATURE-----
Merge tag 'rtw-next-2025-02-10-v2' of https://github.com/pkshih/rtw
Ping-Ke says:
====================
rtw-next patches for v6.15
Major changes are listed below:
rtw88:
* preparation to support RTL8814AU
rtw89:
* switch using wiphy_lock and wiphy_work
* add BB context to manipulate two PHY as preparation of MLO
* improve BT-coexistence mechanism to play A2DP smoothly
* firmware file can contain regd table
====================
Link: https://lore.kernel.org/linux-wireless/b65fae15-79bf-40fa-8acc-63d87ae35e19@RTEXMBS04.realtek.com.tw/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to hardware design constraints, a reset handshake may be
necessary even when the firmware has already crashed, with
the dump descriptions indicating which parts should be done
before/after the handshake, if needed. Implement that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.9296e3113d42.Ifb32703fd06a644d08a86b7af1b990738e3c8134@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is a bit that tells the firmware to wait for the
PHY_CONFIGURATION_CMD before completing its init sequence.
Clarify this in the comment.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.097510347ae2.Ica00b4b30163a21bf993fa968dd406ee4023fc9e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We'll have devices that are EHT capable but don't support 320 MHz and
those devices look like the 320 MHz capable devices, but have distinct
subsystem ID.
We already had the same type of differentiation for HE devices that
support 160 MHz or not.
Enhance that mechanism and now the _IWL_DEV_INFO macro gets an
indication whether the bandwidth should be limited for that specific
device.
The subsystem ID gives a binary answer about the bandwidth limitation
and iwl_pci_find_dev_info() compares this to the list of _IWL_DEV_INFO
entries.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.1ba406c538a5.I6e24123f60a764aedfeaaac8768c26e136c320cf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Re-probing if we had 2 firmware crash within 3 minutes is really too
aggressive. Drastically reduce the threshold to 7 seconds.
After 7 seconds, a new firmware crash will be considered "new" and not
cause a PCI re-probe.
This allows to pass tests that cause a firmware crash every 10 seconds
and expect to see no impact on the traffic.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.38f912b047f4.I03f0c10ae9e7ecea639431f3e089b757cc8a4347@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As MLO link configuration is supported by mac80211, indicate
support for MLO link reconfiguration in station mode.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
----------------
depends on "wifi: ieee80211: Add some missing MLO related definitions"
Link: https://patch.msgid.link/20250205145347.92d19705d2b9.Id07fa3ebad6bc23ecf6e91868f67150ce70f47b0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We're adding a new IWLMLD opmode for just BZ and later
devices. If that's enabled but IWLMVM isn't, the build
fails because 22000 family configs aren't built but BZ
and later refer to it. Rather than trying to make some
new file to build it in all cases, just copy the small
struct.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.1d6186c23bee.I3c61a6c9e0db3ba6eea4dac63e1547945ad01703@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Despite not being able to sustain the full 320 MHz throughput
even at MCS 9, enable 320 MHz on slow PCIe links. This may in
some cases result in frames being dropped (on the air) by the
firmware if they cannot be delivered to the host, but it can
still be better to use 320 MHz.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.1e5356a3b124.I1224023721aaeff8ebcaa47dff88613c7fd0533a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During reprobe, the sw state is being destroyd, and so is the
connection. When the peer STA is being removed, the opmode sends a
command to flush the TXQs of the STA and uses iwl_trans_wait_txq_empty.
This one warns if the FW is not alive, but it really shouldn't if
there is a FW error - and return silently instead, just like we do when
sending a hcmd.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250205145347.76425b10e5a0.I3bf0de2eb090a8b94c4e36d93dd91df61fadb808@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Created a common function iwl_add_mcc_to_tas_block_list() to handle the
operations previously performed by iwl_mld_add_to_tas_block_list() and
iwl_mvm_add_to_tas_block_list(). moved this new function to regulatory.c
to better reflect its purpose and improve code organization.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.157d26fb7f02.I87e20e967835bc895be390daf1c6637e20b52aae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Renamed iwl_mvm_eval_dsm_rfi() to iwl_rfi_is_enabled_in_bios() to better
reflect the function's operation. Additionally, moved the function to the
regulatory.c file for better organization. optimize local variable
usage in it.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.b7ac9d05234e.Ieb623d7e8dca6bb6a5733682b31e4ff1e39373f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we disassociate we may need to send a deauth frame.
Regardless of this decision, we need to flush the queues to drop all the
packets on the Tx queues.
The flow looks like this:
1) Flush packets waiting on the queues (drop=true)
2) Prepare Tx to send the deauth
3) Build the deauth header
4) send the deauth
5) Flush the deauth packet (drop=false)
6) Complete_tx
Step 3 and 4 are done in ieee80211_send_deauth_disassoc() and that
function must be called even if we decide not to send the deauth
frame because we need step 3 for cfg80211.
This means that if we want to send the deauth frame, we need all the
steps, but if we don't want to send the deauth frame we still want step
1 and 3.
Change the code to do that.
Also, prevent sending the deauth frame if we are in the middle of a CSA
with mode=1 in which case we won't be able to send the frame anyway.
This caused issues in iwlwifi at step 5 since the firmware wouldn't
send the frame and we'd be stuck flushing with drop=false.
Implement this in ieee80211_set_disassoc() which has many callers.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.480bfea605e0.I91131eed942e49b9885d73f4180a3c9c26691c62@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This wiphy work is canceled when the iface is stopped,
and shouldn't be queued for a non-running iface.
If it happens to be queued for a non-running iface (due to a bug)
it can cause a corruption of wiphy_work_list when ieee80211_setup_sdata
is called. Make sure to cancel it in this case and warn on.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250205110958.99204c767c10.I84ce27a239059f6009cee197b252549a11426046@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With the previous patch to no longer access deflink for aggregation
it seems we no longer access the deflink for MLO stations (MLDs) so
we can allow removing the assoc link.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.05bc2175cea2.I8f62609a682fdf3f703872d0fce63ab6a4780a7e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a station has connected with MLO (as indicated by valid_links
being non-zero, even if that may have just a single bit set), it
necessarily supports EHT/aggregation, so we don't need to check
the deflink for those cases.
Add conditions so we can support removing the link it/we used to
associate on.
Note that we still use the statistics in the deflink, but that's
a whole different story we will need to address separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.daf2a9e367f2.Id2c2dfbbe7451cc900ed88c5a81b33c55b4ab1cf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We might not have called drv_mgd_prepare_tx(), so only call
drv_mgd_complete_tx() under the same conditions.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.e091fc39a351.Ie6a3cdca070612a0aa4b3c6914ab9ed602d1f456@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the original commit 15fae3410f ("mac80211: notify driver on
mgd TX completion") I evidently made a mistake and placed the
call in the "associated" if, rather than the "assoc_data". Later
I noticed the missing call and placed it in commit c042600c17
("wifi: mac80211: adding missing drv_mgd_complete_tx() call"),
but didn't remove the wrong one. Remove it now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.6ed954179bbf.Id8ef8835b7e6da3bf913c76f77d201017dc8a3c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This will be used by the low level driver.
Note that link_id will be 0 in case of a non-MLO authentication.
Also fix a call-site of mgd_prepare_tx() where the link_id was not
populated.
Update the documentation to reflect the current state
ieee80211_prep_tx_info::link_id is also available in mgd_complete_tx().
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.6a590f189ce5.I1fc5c0da26b143f5b07191eb592f01f7083d55ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a few tests for ieee80211_determine_chan_mode that check that
mac80211 will not try to connect to an AP if an advertised basic rate is
not supported.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.530c81eb7fdc.Ia77f5efdf9efb70d2766a3d6bf425553bcb308e8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
So far we did not verify the HT and VHT basic MCS set. However, in
P802.11REVme/D7.0 (6.5.4.2.4) says that the MLME-JOIN.request shall
return an error if the VHT and HT basic set requirements are not met.
Given broken APs, apply VHT basic MCS/NSS set checks only in
strict mode.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.e2d8d4095f6b.I66bcf6c2de3b9d3325e4ffd9f573f4cd26ce5685@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since we use hwsim for testing e.g. the hostapd implementation,
enable strict mode to catch errors that would otherwise not be
caught.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.85bee694f09c.I61ec37d20fe97699d47fce252dc4ae2e4475fc51@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a strict mode where we disable certain workarounds and have
additional checks such as, for now, that VHT capabilities from
association response match those from beacon/probe response. We
can extend the checks in the future.
Make it an opt-in setting by the driver so it can be set there
in some driver-specific way, for example. Also allow setting
this one hw flag through the hwflags debugfs, by writing a new
strict=0 or strict=1 value.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.5cecb0469479.I4a69617dc60ba0d6308416ffbc3102cfd08ba068@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add processing of negotiated TTLM tear down frame.
Handle this frame similar to the way a locally initiated
tear down is handled.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.860691076786.I32df71182c25c5f84e4534f40efe1316926b8249@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for configuring EPCS state:
- When EPCS is enabled, send an EPCS enable request action frame
to the AP. When the AP replies with EPCS enable response, enable
EPCS by applying the QoS parameters provided by the AP. Do so for
all the valid MLD links. Once EPCS is enabled, support processing
of unsolicited EPCS enable response frames.
- When EPCS is disabled, send an EPCS teardown request to the AP
and apply the QoS parameters as obtained from the last received
beacons. Do so for all the valid links.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.7a90afd7e140.I3f602d65f5c1fd849d6c70b12307dda33aa91ccb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The function first updates the link configuration and then
calls the driver to set the link parameters. Since the call
to the driver might sleep, split the function such that
the link configuration could be done without calling the
driver. This would be useful in cases that WMM parameters
need to be configured, but the current locking doesn't allow
to call the driver.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.b1cedcf93763.I65783c102d44127035838f97fab64ec4df5c40f3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
