Whether AuxCCS can be properly supported depends on the support both from
the display side and non-display side of the driver.
Let us therefore allow for the non-display part to be queried via the
display parent interface.
The new interface replaces the HAS_AUX_CCS macro and we also remove the
FIXME from skl_universal_plane_create since now the xe will not advertise
the AuxCCS caps to start with so they do not need to be removed after
enumeration.
Also, by removing this build specific FIXME we come a step closer to fully
de-coupling display and non-display.
The existing HAS_AUX_CCS gets renamed to HAS_AUX_DIST since it is still
required for determining the need for PLANE_AUX_DIST programming.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
References: cf48bddd31 ("drm/i915/display: Disable AuxCCS framebuffers if built for Xe")
Cc: intel-gfx@lists.freedesktop.org
Cc: intel-xe@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com> # v1
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20251209120034.9143-1-tursulin@igalia.com
On C10 PHY PLLs the SSC is enabled by programming the
XELPDP_PORT_CLOCK_CTL / XELPDP_SSC_ENABLE_PLLB flag and the
PHY_C10_VDR_PLL 4..8 registers:
- If SSC is enabled XELPDP_SSC_ENABLE_PLLB is set and the
PHY_C10_VDR_PLL registers are programmed to non-zero values.
- If SSC is disabled XELPDP_SSC_ENABLE_PLLB is cleared and the
PHY_C10_VDR_PLL registers are programmed to zeroed-out values.
The driver's state checker verifies if the above settings are consistent,
i.e. if XELPDP_SSC_ENABLE_PLLB being set corresponds to the
PHY_C10_VDR_PLL registers being zeroed-out or not.
On WCL the BIOS programs non-zero values to the PHY_C10_VDR_PLL 4..8
registers, but does not set the XELPDP_SSC_ENABLE_PLLB flag. This will
trigger the following PLL state check warning during driver loading:
<4>[ 44.457809] xe 0000:00:02.0: [drm] PHY B: SSC enabled state (no), doesn't match PLL configuration (SSC-enabled)
<4>[ 44.457833] WARNING: CPU: 4 PID: 298 at drivers/gpu/drm/i915/display/intel_cx0_phy.c:2281 intel_cx0pll_readout_hw_state+0x221/0x620 [xe]
It's not clear whether the HW uses the PHY_C10_VDR_PLL 4..8 register
values if the XELPDP_SSC_ENABLE_PLLB flag is cleared, or just ignores
them in this case. Since the driver always programs the register values
according to the above, it still makes sense to verify that the
programming happened correctly.
To avoid the state check WARN during driver loading due to the way BIOS
programs the registers, convert the WARN to a debug message.
While at it clarify the debug message.
v2: Clarify the debug message. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251209153407.1791839-1-imre.deak@intel.com
Now as Selective Fetch is performing full frame update on async flip and
vblank evasion is done as needed we can allow async flip even when
Selective Fetch is enabled.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251204070718.1090778-4-jouni.hogander@intel.com
According to bspec selective fetch is not supported with async flips and
instructing full frame update on async flip.
v4:
- check crtc_state->async_flip_planes in
psr2_sel_fetch_pipe_state_supported
v3:
- rebase
- fix old_crtc_state->pipe_srcsz_early_tpt
- fix using intel_atomic_get_new_crtc_state
v2:
- check also crtc_state->async_flip_planes in
psr2_sel_fetch_plane_state_supported
Bspec: 55229
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251204070718.1090778-3-jouni.hogander@intel.com
Currently plane id bit is set in crtc_state->async_flip_planes only when
async flip toggle workaround is needed. We want to utilize
crtc_state->async_flip_planes further in Selective Fetch calculation.
v2:
- rework if-else if to if-if
- added comment updated
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251204070718.1090778-2-jouni.hogander@intel.com
Since the stolen memory hooks are function pointers, make some of them
optional instead of having to define them for xe.
insert_node, area_address, and area_size are only needed on platforms
not supported by xe.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patch.msgid.link/0dbb460e8bd1df29df98862d08fcdfda03912673.1764930576.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Call the stolen memory interface through the display parent interface.
This makes xe compat gem/i915_gem_stolen.h redundant, and it can be
removed.
v2: Rebase, convert one more call that appeared
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patch.msgid.link/350c82c49fe40f6319d14d309180e2e2752145ac.1764930576.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
intel_display_driver_probe_nogem() is too high of an abstraction level
to be looping and initializing individual CRTCs. Move this to
intel_crtc.c and repurpose intel_crtc_init() to initialize all
CRTCs. Make the original a static __intel_crtc_init() for initializing a
single CRTC.
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251204143235.3138973-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As everything else related to PSR and Panel Replay capabilities are moved
into intel_connector move sink_sync_latency as well.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-9-jouni.hogander@intel.com
As a preparation for MST Panel Replay we need to move Panel Replay sink
related data into intel_connector. Move sink support booleans as well
into intel_connector. Generally this is more correct place for this data so
move PSR versions as well.
Still sink_support and sink_panel_replay_support are kept to keep CAN_PSR
and CAN_PANEL_REPLAY macros. Plan is to keep them that way as they are
widely used from patch where connector is not available.
Later we might want to clear intel_dp->psr.sink_panel_replay_support if any
of the devices in branch is not supporting Panel Replay (mst).
v2:
- commit message updated
- Extra w/s removed
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-8-jouni.hogander@intel.com
As a preparation for MST Panel Replay we need to move Panel Replay sink
related data into intel_connector. Move Panel Replay DSC sink support data
as well into intel_connector.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-7-jouni.hogander@intel.com
Currently we are leaving pr_dpcd containing Panel Replay capability DPCD
registers as it is on disconnect. Clear it as well on disconnect.
v2: add FIXME
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-6-jouni.hogander@intel.com
As a preparation for MST Panel Replay we need to move Panel Replay sink
related data into intel_connector. Move pr_dpcd as well into
intel_connector. Generally this is more correct place for this data so move
psr_dpcd as well.
v2:
- move pr/psr_dpcd into *_caps substruct
- drop intel_dp from psr2_su_region_et_valid and
_panel_replay_compute_su_granularity parameters
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-5-jouni.hogander@intel.com
Currently we are checking Panel Replay capability DPCD register in
intel_alpm.c and writing PR_ALPM_CTL_ALLOW_LINK_OFF_BETWEEN_AS_SDP_AND_SU
and PR_ALPM_CTL_AS_SDP_TRANSMISSION_IN_ACTIVE_DISABLE in PR_ALPM_CTL
register base on the informaion. Instead of directly accessing
intel_dp->pr_dpcd compute the behavior during psr_compute_config and store
it in intel_crtc_state.
v2:
- inline added helpers
- use intel_dp_attached_dp instead of passing as a parameter
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-4-jouni.hogander@intel.com
Currently we are storing only one set of granularity information for panels
supporting both PSR and Panel Replay. As panel is informing own
granularities for PSR and Panel Replay they could be different. Let's use
own granularities for PSR and Panel Replay instead of having only one set
for both. This is done by having intel_connector::psr_caps and
panel_replay_caps both containing granularity information.
Also remove complexity of sharing granularity read between PSR and Panel
Replay.
v3:
- use cpu_to_le16 for default value
v2:
- use __le16 for two byte values in dpcd
- use sizeof instead of hardcoded size in reading dpcd
- drop unnecessarily passing intel_dp pointer
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-3-jouni.hogander@intel.com
As a preparation for MST Panel Replay implementation add psr_caps and
panel_replay_caps structures into intel_connector. These are supposed to
contain all sink information related to PSR and Panel Replay.
As a first step in moving Panel Replay and PSR sink data add panel
granularity information into these newly added caps structures.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251204104733.1106145-2-jouni.hogander@intel.com
Expose color pipeline and add ability to program it.
v2: Set bit to enable multisegmented lut
v3: s/drm_color_lut_32/drm_color_lut32 (Simon)
v4: - Fix dsb programming
- Remove multi-segment LUT, they will be added in later patches
- Add pipeline only to TGL+
- Code Refactor
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-16-uma.shankar@intel.com
Add helpers to program the 3D LUT registers and arm them.
LUT_3D_READY in LUT_3D_CLT is cleared off by the HW once
the LUT buffer is loaded into it's internal working RAM.
So by the time we try to load/commit new values, we expect
it to be cleared off. If not, log an error and return
without writing new values. Do it only when writing with MMIO.
There is no way to read register within DSB execution.
v2:
- Add information regarding LUT_3D_READY to commit message (Jani)
- Log error instead of a drm_warn and return without committing changes
if 3DLUT HW is not ready to accept new values.
- Refactor intel_color_crtc_has_3dlut()
Also remove Gen10 check (Suraj)
v3:
- Addressed review comments (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-15-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Extract the LUT and program plane post csc registers.
v2: Add DSB support
v3: Add support for single segment 1D LUT
v4:
- s/drm_color_lut_32/drm_color_lut32 (Simon)
- Move declaration to beginning of the function (Suraj)
- Remove multisegmented code, add it later
- Remove dead code for SDR planes, add it later
v5:
- Fix iterator issues
v6: Removed redundant variable (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-13-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add callback to program Pre-CSC LUT for TGL and beyond
v2: Add DSB support
v3: Add support for single segment 1D LUT color op
v4:
- s/drm_color_lut_32/drm_color_lut32/ (Simon)
- Change commit message (Suraj)
- Improve comments (Suraj)
- Remove multisegmented programming, to be added later
- Remove dead code for SDR planes, add when needed
BSpec: 50411, 50412, 50413, 50414
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-12-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add framework that will help in loading LUT to Pre/Post CSC color
blocks.
v2: Add dsb support
v3: Align enum names
v4: Propagate change in lut data to crtc_state
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-11-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add callback for setting CTM block in platforms D12 and beyond
v2:
- Add dsb support
- Pass plane_state as we are now doing a uapi to hw state copy
- Add support for 3x4 matrix
v3:
- Add relevant header file
- Fix typo (Suraj)
- Add callback to TGL+ (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-8-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When int_bits == 0, we lose the sign bit when we do the range check
and apply the mask.
Fix this by ensuring a minimum of one integer bit, which guarantees space
for the sign bit in fully fractional representations (e.g. S0.12)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-7-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add framework to program CSC. It enables copying of matrix from UAPI
to intel plane state. Also add helper functions which will eventually
program values to hardware.
Add a crtc state variable to track plane color change.
v2:
- Add crtc_state->plane_color_changed
- Improve comments (Suraj)
- s/intel_plane_*_color/intel_plane_color_* (Suraj)
v3:
- align parameters with open braces (Suraj)
- Improve commit message (Suraj)
v4:
- Re-arrange variable declaration (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-6-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a color pipeline with three colorops in the sequence
1D LUT - 3x4 CTM - 1D LUT
This pipeline can be used to do any color space conversion or HDR
tone mapping
v2: Change namespace to drm_plane_colorop*
v3: Use simpler/pre-existing colorops for first iteration
v4:
- s/*_tf_*/*_color_* (Jani)
- Refactor to separate files (Jani)
- Add missing space in comment (Suraj)
- Consolidate patch that adds/attaches pipeline property
v5:
- Limit MAX_COLOR_PIPELINES to 2.(Suraj)
Increase it as and when we add more pipelines.
- Remove redundant initialization code (Suraj)
v6:
- Use drm_plane_create_color_pipeline_property() (Arun)
Now MAX_COLOR_PIPELINES is 1
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-5-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add intel colorop create helper
v2:
- Make function names consistent (Jani)
- Remove redundant code related to colorop state
- Refactor code to separate files
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-4-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add data structure to store intel specific details of colorop
v2:
- Remove dead code
- Convert macro to function (Jani)
- Remove colorop state as it is not being used
- Refactor to separate file
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-3-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add macros to identify intel specific color blocks. It will help
in mapping drm_color_ops to intel color HW blocks
v2:- Prefix enums with INTEL_* (Jani, Suraj)
- Remove unnecessary comments (Jani)
- Commit message improvements (Suraj)
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-2-uma.shankar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The Makefile logic for building xe_sriov_vfio.o was added incorrectly,
as setting CONFIG_XE_VFIO_PCI=m means it doesn't get included into a
built-in xe driver:
ERROR: modpost: "xe_sriov_vfio_stop_copy_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_stop_copy_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_suspend_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_wait_flr_done" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_error" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_enter" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_device" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_resume_data_exit" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_data_write" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
ERROR: modpost: "xe_sriov_vfio_migration_supported" [drivers/vfio/pci/xe/xe-vfio-pci.ko] undefined!
WARNING: modpost: suppressed 3 unresolved symbol warnings because there were too many)
Check for CONFIG_XE_VFIO_PCI being enabled in the Makefile to decide whether to
include the object instead.
Fixes: bd45d46ffc ("drm/xe/pf: Export helpers for VFIO")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251204094154.1029357-1-arnd@kernel.org
(cherry picked from commit ef7de33544)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Disable cache read setting in the cacheability configuration
register as per the wa recommendation
Bspec: 79482, 74722, 68881
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251127115349.249120-4-vinod.govindapillai@intel.com
One of the FBC instances can utilize the reserved area of SoC
level cache for the fbc transactions to benefit reduced memory
system power especially in idle scenarios. Reserved area of the
system cache can be assigned to an fbc instance by configuring
the cacheability configuration register with offset of the
compressed frame buffer in stolen memoty of that fbc. There is
a limit to this reserved area which is programmable and for
xe3p_lpd the limit is defined as 2MB. The first FBC instance
enabled will utilize the system cache as of now.
v2: - better to track fbc sys cache usage from intel_display level,
sanitize the cacheability config register on probe (Matt)
- limit this for integrated graphics solutions, confirmed that
no default value set for cache range by hw (Gustavo)
v3: - changes related to the use of fbc substruct in intel_display
- use intel_de_write() instead of intel_rmw() by hardcoding the
default value fields
v4: - protect sys cache config accesses, sys cache usage status in
debugfs per fbc instance (Jani)
v5: - mutex_init and missing mutex_lock in sanitize call
v6: - changes to commit message and some obvious comments removed
Bspec: 68881, 74722
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251128113557.129192-1-vinod.govindapillai@intel.com
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
As FBC can utilize the system cache in xe3p_lpd onwards, we need
a provision to track which fbc instance is utilizing this cache.
A sub-struct at intel_display level to group all the fbc ops will
make fbc handling much easier. Introduce a fbc sub-struct and move
the fbc instance array into that.
v2: changes in commit message
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251127115349.249120-2-vinod.govindapillai@intel.com
CASF requires the second scaler for sharpness.
Do not expose the SHARPNESS_STRENGTH property if
the CRTC has fewer than two scalers.
v2: Modify header and commit message. [Ankit]
Signed-off-by: Nemesa Garg <nemesa.garg@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patch.msgid.link/20251126084152.3905905-1-nemesa.garg@intel.com
Bspec states that the new AUX power enable/disable sequences are
associated with the LT PHY. As such, use HAS_LT_PHY() instead of IP
checks in those paths in the driver code.
While at it, also move the comment that we can't use the power status
flag to the "else" branch, since that comment is not applicable for the
LT PHY.
Bspec: 68967
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Suggested-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-9-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
We will need to HAS_LT_PHY() that macro in code outside of LT PHY
implementation. Move its definition to intel_display_device.h.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-8-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
NVL uses the Lake Tahoe PHY for display output and the driver recently
added the macro HAS_LT_PHY() to allow selecting code paths specific for
that type of PHY.
While NVL uses Xe3p_LPD as display IP, the type of PHY is actually
defined at the SoC level, so use a platform check instead of display
version.
Bspec: 74199
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patch.msgid.link/20251202012306.9315-7-matthew.s.atwood@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
