Remove if condition that is always true. It is useless and
makes the code less readable.
Signed-off-by: Marcelo Aloisio da Silva <marcelo.as@aol.com>
Link: https://lore.kernel.org/r/20220215023926.GA52339@snoopy
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
_rtw_free_sta_priv() always returns _SUCCESS and it's return value
isn't checked either.
So it makes sense to mark it as void instead of u32.
Signed-off-by: Vihas Makwana <makvihas@gmail.com>
Link: https://lore.kernel.org/r/20220213173424.39935-1-makvihas@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GB-PC1 uses some of the rgmii2 pins (22 - 33) as GPIO. Therefore, the
rgmii2 bus cannot be used on this device.
Overwrite pinctrl-0 property under the ethernet node without rgmii2_pins on
the GB-PC1 devicetree.
Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220215081725.3463-2-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix pinctrl-0 items under the ethernet node to be size-1 items.
Current notation would be used on specifications with non-zero cells.
Fixes: 0a93c0d758 ("staging: mt7621-dts: fix pinctrl properties for ethernet")
Reported-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220215081725.3463-1-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The r8188eu driver does no longer access rf path b registers via
PHYRegDef.
Change the PHYRegDef array in struct hal_data_8188e to a single
variable that holds the register addresses for rf path a. Remove
the initialisation of path b register addresses.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All callers of phy_RFSerialRead set the eRFPath parameter to
RF_PATH_A. Remove the parameter and use RF_PATH_A directly.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All callers of rtl8188e_PHY_QueryRFReg set the eRFPath parameter
to RF_PATH_A. Remove the parameter and use RF_PATH_A directly.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rf registers can be read by rtw_wx_read_rf or via the private ioctl 0x0B.
The latter calls rtw_dbg_port. Limit rf register reads to path a in
rtw_debug_port.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3b011b097c ("staging: r8188eu: limit rf register writes to
path a") limits rf register writes by private ioctls to RF_PATH_A.
Apart from private ioctls, the rest of the driver uses only path a.
This patch limits rf register reads by the private ioctl 0x0D, which
calls rtw_wx_read_rf, to path a.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The path variable is always 0 in bb_reg_dump. Remove the path variable
and replace the constant 0 with RF_PATH_A to make it clearer that path
a is used.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only caller of phy_RFSerialWrite sets the eRFPath parameter
to RF_PATH_A. Remove the parameter and use RF_PATH_A directly.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All callers of rtl8188e_PHY_SetRFReg set the eRFPath parameter
to RF_PATH_A. Remove the parameter and use RF_PATH_A directly.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3b011b097c ("staging: r8188eu: limit rf register writes to
path a") limited the rtw_wx_write_rf function to write only rf registers
for path a.
The private ioctl 0x0B invokes the rtw_dbg_port function. This ioctl
can also be used for writing rf registers. We should limit these register
writes to rf path a as well.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We've already limited the rtw_wx_write_rf function to RF_PATH_A in commit
3b011b097c ("staging: r8188eu: limit rf register writes to path a").
Set RF_PATH_A explicitly when we call rtl8188e_PHY_SetRFReg. This will
make it easier later to verify that all callers of rtl8188e_PHY_SetRFReg
use path a.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no need to store the usb device speed in struct dvobj_priv.
We can read the speed from struct usb_device. dvobj_priv has a pointer
to the usb_device.
Reorder one if-statement to make the code clearer.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220209192842.99399-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
checkpatch.pl emits the following warning:
CHECK: Prefer kzalloc(sizeof(*pcmd)...) over kzalloc(sizeof(struct cmd_obj)...)
+ pcmd = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
CHECK: Prefer kzalloc(sizeof(*psetkeyparm)...) over kzalloc(sizeof(struct setkey_parm)...)
+ psetkeyparm = kzalloc(sizeof(struct setkey_parm), GFP_KERNEL).
According to the above "CHECK[S]", use the preferred style in the two kzalloc()
of rtw_set_key().
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20220208180426.27455-2-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keep the success path and error path separate in rtw_usb_if1_init() and
drop the "status" variable.
Also, remove do-nothing gotos.
Reviewed-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vihas Makwana <makvihas@gmail.com>
Link: https://lore.kernel.org/r/20220209190752.7232-1-makvihas@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MT7621 system controller node is already providing the clocks for the whole
system but must also serve as a reset provider. Hence, add reset controller
related code to the clock driver itself. To get resets properly ready for
the rest of the world we need to move platform driver initialization process
to 'arch_initcall'.
CC: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220210094859.927868-3-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make system controller a reset provider for all the peripherals in the
MT7621 SoC adding '#reset-cells' property.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220210094859.927868-2-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'destroy_workqueue()' already drains the queue before destroying it,
so there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220210060205.1607792-1-chi.minghao@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'destroy_workqueue()' already drains the queue before destroying it,
so there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220210060411.1607928-1-chi.minghao@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace "struct list_head head = LIST_HEAD_INIT(head)" with
"LIST_HEAD(head)" to simplify the code.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/r/20220209032645.38305-1-cai.huoqing@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace "struct list_head head = LIST_HEAD_INIT(head)" with
"LIST_HEAD(head)" to simplify the code.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/r/20220209032715.38437-1-cai.huoqing@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device needs data about the antenna configuration. This information
in provided by PDS (Platform Data Set, this is the wording used in WF200
documentation) files.
Until now, the driver had to parse the PDS file before to send it. This
solution was not acceptable for the vanilla kernel. We have slightly
changed the PDS format so it is now an array of Type-Length-Value.
This patch allows to support new format and keep compatibility with
legacy format.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
probe: allow new PDS format
Link: https://lore.kernel.org/r/20220211162659.528333-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIJZmoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZdoH/04d8zUhM3Fd3ACB
V/ONtOXmkfP2mEJSjb7cXTN1EM2SlOBdSnSsEw09FtGhjHABjOnLho4J5ixk9TH8
zNMNI3EMksM2T9KadHwxv8Vvp1LTrWRzMbws8tOCPA0RkOpikJfClC8CzRAyidJ3
cAbbDH/Jl1GnVZ8bpKmv2auYt+kNVGb0cwJ2W8phCwwkL7sLky5tgYeaGiJEXbJf
Tfi/3qtFdmYjD8wtYnCfzjnB7suG5nF7rGEnxCIxNi+IA4DieUv2c1KchuoaBfT9
df364VjKaGT3j+GB07ksQ/8mkwWiRXsCzOXAyMZSZaWjdMD4aAhCTJak5j7/TvGC
wtgHPww=
=/CMW
-----END PGP SIGNATURE-----
Merge 5.17-rc4 into staging-testing
We need the staging driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Move -Wunsligned-access to W=1 builds to avoid sprinkling warnings for
the latest Clang
- Fix missing fclose() in Kconfig
- Fix Kconfig to touch dep headers correctly when KCONFIG_AUTOCONFIG is
overridden.
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmIJNo4VHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGfkcQAJy0r6+XHQj/s/avH/KiicyFuPhl
VHDFqVjVsfhgrtw3+gbgP7J9piNPwf2H9vcbjD+HOqEGWPLMZh+pi5PxEhVSZ1AD
IgYM38xaLdGD5FPVFgFW7IpUOJ06c1CeYZkXWUEQm2vSbY9A9aJWFdAgNqlJfyS2
ApiVQybTaBMZoF/MPhpMeeW9IlBYzupfw4cNTkMx7wwi582DZharypxxyyKwsgW2
2T7e8luSTBWK4Qee6PDs1M3CtTSEITARGjQCrY38IU72pGsY45/if0BkK9XIBqCM
j1JA9339ceKYK9qG0vGLmTbP4q2vfWXoW//UFZYxAr5LvPUgA5ILKjXUT7nfMwYw
sWFbD0cMOnakC+FBnKdd+uYSr7aZul93+QkLXgLtHh7eJvFWbtd+e6oNaayTs0b1
e28Sme0zG6h1L/YeGTEFI0uBiB17FmSG7iU5JK0ech948AnF7IAtvO/xRZ4hNC/l
0eDACv+sMyVRjQdniKytXWpKq3KLB1KjSnxJZ85yQqAXhNwm5xafWUdIOAyvHz5Z
xiaEdD5Ac1q1AEORqUh19x4mAzxnvijF3iZnsZr7+ipE1RWdTXVVmWhyOeh1kx0f
4kJfI1IYbHyZUYcN6KT5Lusi6GZA3nbQTfFkjo9J328xivPrBTBYJQrk9R13MqI2
a6dpCAmbVtfPXGU7
=AOMt
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix the truncated path issue for HAVE_GCC_PLUGINS test in Kconfig
- Move -Wunsligned-access to W=1 builds to avoid sprinkling warnings
for the latest Clang
- Fix missing fclose() in Kconfig
- Fix Kconfig to touch dep headers correctly when KCONFIG_AUTOCONFIG is
overridden.
* tag 'kbuild-fixes-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix failing to generate auto.conf
kconfig: fix missing fclose() on error paths
Makefile.extrawarn: Move -Wunaligned-access to W=1
kconfig: let 'shell' return enough output for deep path names
- Don't install an hotplug notifier for GICV3-ITS on systems which do not
need it to prevent a warning in the notifier about inconsistent state
- Add the missing device tree matching for the T-HEAD PLIC variant so the
related SoC is properly supported.
-----BEGIN PGP SIGNATURE-----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=QWzW
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2022-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Interrupt chip driver fixes:
- Don't install an hotplug notifier for GICV3-ITS on systems which do
not need it to prevent a warning in the notifier about inconsistent
state
- Add the missing device tree matching for the T-HEAD PLIC variant so
the related SoC is properly supported"
* tag 'irq-urgent-2022-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Add missing thead,c900-plic match string
dt-bindings: update riscv plic compatible string
irqchip/gic-v3-its: Skip HP notifier when no ITS is registered
-----BEGIN PGP SIGNATURE-----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=+cTD
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
"Fix a case where objtool would mistakenly warn about instructions
being unreachable"
* tag 'objtool_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Merge annotate_reachable() into _BUG_FLAGS() asm
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmII99AACgkQEsHwGGHe
VUp03RAAo2KE+kb5kbMRqF0eJjGCl34EGbcfkl2Kr+M1tbi7aG41VbnGuZIyHoOQ
U6ZnN8v/ft5tQy7PfXrZW7iNKQgLrdEOfI6lUoyr5LGgJprXj/SSJvFMngfypuQi
mPhkvRs+hTIe4ylQvbqQKgQxFIMgF90+XsdmBz0vaJDun8dkOr8ghS2bBPHf1y4o
1sQ14SgDCU0hVtPhH5HQQIcanqmHXNbYreXuTToHRwgqy4CcoX5vaQQUGgjQK5SK
ektmDxGiBI90jscL+ZoXg730dchXku04WY5tfoYJazUnIMKNSlpmTGQLBsQnlDf5
Cxi94h91GYaLM0u44OICyfHNPUi+xx19o31dzBnNviSpKLKoK/lquFCNUXNqVn9E
lwOhMysSYOuxgtnYqLXMUSQWMwY3rbISrUqPOR7vMYzg/b+LKPTc76I9B7C9/UYW
6lKCchDicAAv/rLh1+0JOOKWTaz1F8dVasxRCRGYreL8ZxT14jsB41sn4xxSRXRZ
d/iEobh/LFL1c37ju0sWdHj5fSK9c4pPIM560o2ftBwGypvryVdBFDpbe3B1W/AD
IJXRsVW3LU7BbnGEXYcobcX5vXeBKULtcTliS9VTQjIQVZkcqPp7t8GSJOMf9qos
k889Fi9NfQktaUQDQztTujmwuQrP7JPaejrmvQU0xwam88ZkvwM=
=yZ3t
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"Prevent softlockups when tearing down large SGX enclaves"
* tag 'x86_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Silence softlockup detection when releasing large enclaves
-----BEGIN PGP SIGNATURE-----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=mhs3
-----END PGP SIGNATURE-----
Merge tag '5.17-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small smb3 reconnect fixes and an error log clarification"
* tag '5.17-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: mark sessions for reconnection in helper function
cifs: call helper functions for marking channels for reconnect
cifs: call cifs_reconnect when a connection is marked
[smb3] improve error message when mount options conflict with posix
- Don't register a hotplug notifier on GICv3 systems that advertise
LPI support, but have no ITS to make use of it
- Add missing DT matching for the thead,c900-plic variant of the
SiFive PLIC
-----BEGIN PGP SIGNATURE-----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=LhM1
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Don't register a hotplug notifier on GICv3 systems that advertise
LPI support, but have no ITS to make use of it
- Add missing DT matching for the thead,c900-plic variant of the
SiFive PLIC
Link: https://lore.kernel.org/r/20220211110038.1179155-1-maz@kernel.org
