commit a8972d5a49 upstream.
In jadard_prepare() a reset pulse is generated with the following
statements (delays ommited for clarity):
gpiod_set_value(jadard->reset, 1); --> Deassert reset
gpiod_set_value(jadard->reset, 0); --> Assert reset for 10ms
gpiod_set_value(jadard->reset, 1); --> Deassert reset
However, specifying second argument of "0" to gpiod_set_value() means to
deassert the GPIO, and "1" means to assert it. If the reset signal is
defined as GPIO_ACTIVE_LOW in the DTS, the above statements will
incorrectly generate the reset pulse (inverted) and leave it asserted
(LOW) at the end of jadard_prepare().
Fix reset behavior by inverting gpiod_set_value() second argument
in jadard_prepare(). Also modify second argument to devm_gpiod_get()
in jadard_dsi_probe() to assert the reset when probing.
Do not modify it in jadard_unprepare() as it is already properly
asserted with "1", which seems to be the intended behavior.
Fixes: 6b818c533d ("drm: panel: Add Jadard JD9365DA-H3 DSI panel")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240927135306.857617-1-hugo@hugovil.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927135306.857617-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d7e3fd6582 ]
The jcore-aic irqchip does not have separate interrupt numbers reserved for
cpu-local vs global interrupts. Therefore the device drivers need to
request the given interrupt as per CPU interrupt.
69a9dcbd2d ("clocksource/drivers/jcore: Use request_percpu_irq()")
converted the clocksource driver over to request_percpu_irq(), but failed
to do add all the required changes, resulting in a failure to register PIT
interrupts.
Fix this by:
1) Explicitly mark the interrupt via irq_set_percpu_devid() in
jcore_pit_init().
2) Enable and disable the per CPU interrupt in the CPU hotplug callbacks.
3) Pass the correct per-cpu cookie to the irq handler by using
handle_percpu_devid_irq() instead of handle_percpu_irq() in
handle_jcore_irq().
[ tglx: Massage change log ]
Fixes: 69a9dcbd2d ("clocksource/drivers/jcore: Use request_percpu_irq()")
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/all/20250216175545.35079-3-contact@artur-rojek.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3dbc0215e3 ]
Most kernel configs enable multiple Tegra SoC generations, causing this
typo to go unnoticed. But in the case where a kernel config is strictly
for Tegra186, this is a problem.
Fixes: 989863d7cb ("drm/nouveau/pmu: select implementation based on available firmware")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218-nouveau-gm10b-guard-v2-1-a4de71500d48@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5644c6b50f ]
The generic_map_lookup_batch currently returns EINTR if it fails with
ENOENT and retries several times on bpf_map_copy_value. The next batch
would start from the same location, presuming it's a transient issue.
This is incorrect if a map can actually have "holes", i.e.
"get_next_key" can return a key that does not point to a valid value. At
least the array of maps type may contain such holes legitly. Right now
these holes show up, generic batch lookup cannot proceed any more. It
will always fail with EINTR errors.
Rather, do not retry in generic_map_lookup_batch. If it finds a non
existing element, skip to the next key. This simple solution comes with
a price that transient errors may not be recovered, and the iteration
might cycle back to the first key under parallel deletion. For example,
Hou Tao <houtao@huaweicloud.com> pointed out a following scenario:
For LPM trie map:
(1) ->map_get_next_key(map, prev_key, key) returns a valid key
(2) bpf_map_copy_value() return -ENOMENT
It means the key must be deleted concurrently.
(3) goto next_key
It swaps the prev_key and key
(4) ->map_get_next_key(map, prev_key, key) again
prev_key points to a non-existing key, for LPM trie it will treat just
like prev_key=NULL case, the returned key will be duplicated.
With the retry logic, the iteration can continue to the key next to the
deleted one. But if we directly skip to the next key, the iteration loop
would restart from the first key for the lpm_trie type.
However, not all races may be recovered. For example, if current key is
deleted after instead of before bpf_map_copy_value, or if the prev_key
also gets deleted, then the loop will still restart from the first key
for lpm_tire anyway. For generic lookup it might be better to stay
simple, i.e. just skip to the next key. To guarantee that the output
keys are not duplicated, it is better to implement map type specific
batch operations, which can properly lock the trie and synchronize with
concurrent mutators.
Fixes: cb4d03ab49 ("bpf: Add generic support for lookup batch op")
Closes: https://lore.kernel.org/bpf/Z6JXtA1M5jAZx8xD@debian.debian/
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/85618439eea75930630685c467ccefeac0942e2b.1739171594.git.yan@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 487a3ea7b1 ]
nvme_validate_passthru_nsid() logs an err message whose format string is
split over 2 lines. There is a missing space between the two pieces,
resulting in log lines like "... does not match nsid (1)of namespace".
Add the missing space between ")" and "of". Also combine the format
string pieces onto a single line to make the err message easier to grep.
Fixes: e7d4b5493a ("nvme: factor out a nvme_validate_passthru_nsid helper")
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 578539e096 ]
nvme_tcp_init_connection() attempts to receive an ICResp PDU but only
checks that the return value from recvmsg() is non-negative. If the
sender closes the TCP connection or sends fewer than 128 bytes, this
check will pass even though the full PDU wasn't received.
Ensure the full ICResp PDU is received by checking that recvmsg()
returns the expected 128 bytes.
Additionally set the MSG_WAITALL flag for recvmsg(), as a sender could
split the ICResp over multiple TCP frames. Without MSG_WAITALL,
recvmsg() could return prematurely with only part of the PDU.
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd513e0434 ]
When compiling with W=1, a warning result for the function
nvme_tcp_set_queue_io_cpu():
host/tcp.c:1578: warning: Function parameter or struct member 'queue'
not described in 'nvme_tcp_set_queue_io_cpu'
host/tcp.c:1578: warning: expecting prototype for Track the number of
queues assigned to each cpu using a global per(). Prototype was for
nvme_tcp_set_queue_io_cpu() instead
Avoid this warning by using the regular comment format for the function
nvme_tcp_set_queue_io_cpu() instead of the kdoc comment format.
Fixes: 3219378987 ("nvme-tcp: Fix I/O queue cpu spreading for multiple controllers")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73f69c6be2 ]
PHY_CMN_CLK_CFG1 register has four fields being used in the driver: DSI
clock divider, source of bitclk and two for enabling the DSI PHY PLL
clocks.
dsi_7nm_set_usecase() sets only the source of bitclk, so should leave
all other bits untouched. Use newly introduced
dsi_pll_cmn_clk_cfg1_update() to update respective bits without
overwriting the rest.
While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to
make the code more readable and obvious.
Fixes: 1ef7c99d14 ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637380/
Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-3-0943b850722c@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a97bc924a ]
PHY_CMN_CLK_CFG1 register is updated by the PHY driver and by a mux
clock from Common Clock Framework:
devm_clk_hw_register_mux_parent_hws(). There could be a path leading to
concurrent and conflicting updates between PHY driver and clock
framework, e.g. changing the mux and enabling PLL clocks.
Add dedicated spinlock to be sure all PHY_CMN_CLK_CFG1 updates are
synchronized.
While shuffling the code, define and use PHY_CMN_CLK_CFG1 bitfields to
make the code more readable and obvious.
Fixes: 1ef7c99d14 ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/637378/
Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-2-0943b850722c@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5882578970 ]
PHY_CMN_CLK_CFG0 register is updated by the PHY driver and by two
divider clocks from Common Clock Framework:
devm_clk_hw_register_divider_parent_hw(). Concurrent access by the
clocks side is protected with spinlock, however driver's side in
restoring state is not. Restoring state is called from
msm_dsi_phy_enable(), so there could be a path leading to concurrent and
conflicting updates with clock framework.
Add missing lock usage on the PHY driver side, encapsulated in its own
function so the code will be still readable.
While shuffling the code, define and use PHY_CMN_CLK_CFG0 bitfields to
make the code more readable and obvious.
Fixes: 1ef7c99d14 ("drm/msm/dsi: add support for 7nm DSI PHY/PLL")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/637376/
Link: https://lore.kernel.org/r/20250214-drm-msm-phy-pll-cfg-reg-v3-1-0943b850722c@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 144429831f ]
What used to be the input_10_bits boolean - feeding into the lowest
bit of DSC_ENC - on MSM downstream turned into an accidental OR with
the full bits_per_component number when it was ported to the upstream
kernel.
On typical bpc=8 setups we don't notice this because line_buf_depth is
always an odd value (it contains bpc+1) and will also set the 4th bit
after left-shifting by 3 (hence this |= bits_per_component is a no-op).
Now that guards are being removed to allow more bits_per_component
values besides 8 (possible since commit 49fd30a715 ("drm/msm/dsi: use
DRM DSC helpers for DSC setup")), a bpc of 10 will instead clash with
the 5th bit which is convert_rgb. This is "fortunately" also always set
to true by MSM's dsi_populate_dsc_params() already, but once a bpc of 12
starts being used it'll write into simple_422 which is normally false.
To solve all these overlaps, simply replicate downstream code and only
set this lowest bit if bits_per_component is equal to 10. It is unclear
why DSC requires this only for bpc=10 but not bpc=12, and also notice
that this lowest bit wasn't set previously despite having a panel and
patch on the list using it without any mentioned issues.
Fixes: c110cfd175 ("drm/msm/disp/dpu1: Add support for DSC")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/636311/
Link: https://lore.kernel.org/r/20250211-dsc-10-bit-v1-1-1c85a9430d9a@somainline.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af0a4a2090 ]
Several DPU 5.x platforms are supposed to be using DPU_WB_INPUT_CTRL,
to bind WB and PINGPONG blocks, but they do not. Change those platforms
to use WB_SM8250_MASK, which includes that bit.
Fixes: 1f5bcc4316 ("drm/msm/dpu: enable writeback on SC8108X")
Fixes: ab2b03d73a ("drm/msm/dpu: enable writeback on SM6125")
Fixes: 47cebb740a ("drm/msm/dpu: enable writeback on SM8150")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/628876/
Link: https://lore.kernel.org/r/20241214-dpu-drop-features-v1-2-988f0662cb7e@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f69e54584 ]
The SM8450 and later chips have DPU_MDP_PERIPH_0_REMOVED feature bit
set, which means that those platforms have dropped some of the
registers, including the WD TIMER-related ones. Stop providing the
callback to program WD timer on those platforms.
Fixes: 100d7ef699 ("drm/msm/dpu: add support for SM8450")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/628874/
Link: https://lore.kernel.org/r/20241214-dpu-drop-features-v1-1-988f0662cb7e@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 669c285620 ]
If userspace is trying to achieve a timeout of zero, let 'em have it.
Only round up if the timeout is greater than zero.
Fixes: 4969bccd5f ("drm/msm: Avoid rounding down to zero jiffies")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/632264/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3fefbb30a ]
In case we have to retry the loop, we are missing to unlock+put the
folio. In that case, we will keep failing make_device_exclusive_range()
because we cannot grab the folio lock, and even return from the function
with the folio locked and referenced, effectively never succeeding the
make_device_exclusive_range().
While at it, convert the other unlock+put to use a folio as well.
This was found by code inspection.
Fixes: 8f187163eb ("nouveau/svm: implement atomic SVM access")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124181524.3584236-2-david@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd0f05b989 ]
CZ.NIC's Turris devices are based on Marvell EBU SoCs. Hence add a
dependency on ARCH_MVEBU, to prevent asking the user about these drivers
when configuring a kernel that cannot run on an affected CZ.NIC Turris
system.
Fixes: 992f1a3d4e ("platform: cznic: Add preliminary support for Turris Omnia MCU")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be6686b823 ]
The i.MX System Controller Management Interface firmware is only present
on Freescale i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent
asking the user about this driver when configuring a kernel without
Freescale i.MX platform support.
Fixes: 514b2262ad ("firmware: arm_scmi: Fix i.MX build dependency")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbe8f2fa97 ]
queue_limits_cancel_update() must only be called if
queue_limits_start_update() is called first. Remove the
queue_limits_cancel_update() calls from the raid*_set_limits() functions
because there is no corresponding queue_limits_start_update() call.
Cc: Christoph Hellwig <hch@lst.de>
Fixes: c6e56cf6b2 ("block: move integrity information into queue_limits")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-raid/20250212171108.3483150-1-bvanassche@acm.org/
Signed-off-by: Yu Kuai <yukuai@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab027c488f ]
'struct scmi_imx_misc_ctrl_set_in' has a zero length array in the end,
The sizeof will not count 'value[]', and hence Tx size will be smaller
than actual size for Tx,and SCMI firmware will flag this as protocol
error.
Fix this by enlarge the Tx size with 'num * sizeof(__le32)' to count in
the size of data.
Fixes: 61c9f03e22 ("firmware: arm_scmi: Add initial support for i.MX MISC protocol")
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Tested-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20250123063441.392555-1-peng.fan@oss.nxp.com>
(sudeep.holla: Commit rewording and replace hardcoded sizeof(__le32) value)
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8546cfd08a ]
The SMMU architecture requires wired interrupts to be edge triggered,
which does not align with the DT description for the RK3588. This leads
to interrupt storms, as the SMMU continues to hold the pin high and only
pulls it down for a short amount when issuing an IRQ. Update the DT
description to be in line with the spec and perceived reality.
Signed-off-by: Patrick Wildt <patrick@blueri.se>
Fixes: cd81d3a069 ("arm64: dts: rockchip: add rk3588 pcie and php IOMMUs")
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/Z6pxme2Chmf3d3uK@windev.fritz.box
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 517e8a7835 ]
On an aarch64 kernel with CONFIG_PAGE_SIZE_64KB=y,
arena_htab tests cause a segmentation fault and soft lockup.
The same failure is not observed with 4k pages on aarch64.
It turns out arena_map_free() is calling
apply_to_existing_page_range() with the address returned by
bpf_arena_get_kern_vm_start(). If this address is not page-aligned
the code ends up calling apply_to_pte_range() with that unaligned
address causing soft lockup.
Fix it by round up GUARD_SZ to PAGE_SIZE << 1 so that the
division by 2 in bpf_arena_get_kern_vm_start() returns
a page-aligned value.
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Reported-by: Colm Harrington <colm.harrington@oracle.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20250205170059.427458-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d798ce3f4c ]
Ensure that trusted PTR_TO_BTF_ID accesses perform PROBE_MEM handling in
raw_tp program. Without the previous fix, this selftest crashes the
kernel due to a NULL-pointer dereference. Also ensure that dead code
elimination does not kick in for checks on the pointer.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241104171959.2938862-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 5da7e15fb5 ("net: Add rx_skb of kfree_skb to raw_tp_null_args[].")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98380110bd ]
Correct the fault handling for the AXP717 by changing the i2c write
from regmap_update_bits() to regmap_write_bits(). The update bits
function does not work properly on a RW1C register where we must
write a 1 back to an existing register to clear it.
Additionally, as part of this testing I confirmed the behavior of
errors reappearing, so remove comment about assumptions.
Fixes: 6625767049 ("power: supply: axp20x_battery: add support for AXP717")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250131231455.153447-2-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3fb3cb4350 ]
Size of variable sd_gain equals four bytes - DA9150_QIF_SD_GAIN_SIZE.
Size of variable shunt_val equals two bytes - DA9150_QIF_SHUNT_VAL_SIZE.
The expression sd_gain * shunt_val is currently being evaluated using
32-bit arithmetic. So during the multiplication an overflow may occur.
As the value of type 'u64' is used as storage for the eventual result, put
ULL variable at the first position of each expression in order to give the
compiler complete information about the proper arithmetic to use. According
to C99 the guaranteed width for a variable of type 'unsigned long long' >=
64 bits.
Remove the explicit cast to u64 as it is meaningless.
Just for the sake of consistency, perform the similar trick with another
expression concerning 'iavg'.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: a419b4fd91 ("power: Add support for DA9150 Fuel-Gauge")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://lore.kernel.org/r/20250130090030.53422-1-a.vatoropin@crpt.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a1d939055a ]
According to the schematic, the lcdpwr_en pin is GPIO0_C4,
not GPIO1_C4.
Fixes: 4a8c1161b8 ("arm64: dts: rockchip: Add support for rk3588 based Cool Pi CM5 GenBook")
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20250113104825.2390427-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c78f4afbd9 ]
The following commit
bc235cdb42 ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]")
first introduced deadlock prevention for fentry/fexit programs attaching
on bpf_task_storage helpers. That commit also employed the logic in map
free path in its v6 version.
Later bpf_cgrp_storage was first introduced in
c4bcfb38a9 ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs")
which faces the same issue as bpf_task_storage, instead of its busy
counter, NULL was passed to bpf_local_storage_map_free() which opened
a window to cause deadlock:
<TASK>
(acquiring local_storage->lock)
_raw_spin_lock_irqsave+0x3d/0x50
bpf_local_storage_update+0xd1/0x460
bpf_cgrp_storage_get+0x109/0x130
bpf_prog_a4d4a370ba857314_cgrp_ptr+0x139/0x170
? __bpf_prog_enter_recur+0x16/0x80
bpf_trampoline_6442485186+0x43/0xa4
cgroup_storage_ptr+0x9/0x20
(holding local_storage->lock)
bpf_selem_unlink_storage_nolock.constprop.0+0x135/0x160
bpf_selem_unlink_storage+0x6f/0x110
bpf_local_storage_map_free+0xa2/0x110
bpf_map_free_deferred+0x5b/0x90
process_one_work+0x17c/0x390
worker_thread+0x251/0x360
kthread+0xd2/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Progs:
- A: SEC("fentry/cgroup_storage_ptr")
- cgid (BPF_MAP_TYPE_HASH)
Record the id of the cgroup the current task belonging
to in this hash map, using the address of the cgroup
as the map key.
- cgrpa (BPF_MAP_TYPE_CGRP_STORAGE)
If current task is a kworker, lookup the above hash
map using function parameter @owner as the key to get
its corresponding cgroup id which is then used to get
a trusted pointer to the cgroup through
bpf_cgroup_from_id(). This trusted pointer can then
be passed to bpf_cgrp_storage_get() to finally trigger
the deadlock issue.
- B: SEC("tp_btf/sys_enter")
- cgrpb (BPF_MAP_TYPE_CGRP_STORAGE)
The only purpose of this prog is to fill Prog A's
hash map by calling bpf_cgrp_storage_get() for as
many userspace tasks as possible.
Steps to reproduce:
- Run A;
- while (true) { Run B; Destroy B; }
Fix this issue by passing its busy counter to the free procedure so
it can be properly incremented before storage/smap locking.
Fixes: c4bcfb38a9 ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241221061018.37717-1-wuyun.abel@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5459cce6bf ]
Currently, only TCP supports strparser, but sockmap doesn't intercept
non-TCP connections to attach strparser. For example, with UDP, although
the read/write handlers are replaced, strparser is not executed due to
the lack of a read_sock operation.
Furthermore, in udp_bpf_recvmsg(), it checks whether the psock has data,
and if not, it falls back to the native UDP read interface, making
UDP + strparser appear to read correctly. According to its commit history,
this behavior is unexpected.
Moreover, since UDP lacks the concept of streams, we intercept it directly.
Fixes: 1fa1fe8ff1 ("bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0")
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-4-mrpre@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36b62df568 ]
'sk->copied_seq' was updated in the tcp_eat_skb() function when the action
of a BPF program was SK_REDIRECT. For other actions, like SK_PASS, the
update logic for 'sk->copied_seq' was moved to tcp_bpf_recvmsg_parser()
to ensure the accuracy of the 'fionread' feature.
It works for a single stream_verdict scenario, as it also modified
sk_data_ready->sk_psock_verdict_data_ready->tcp_read_skb
to remove updating 'sk->copied_seq'.
However, for programs where both stream_parser and stream_verdict are
active (strparser purpose), tcp_read_sock() was used instead of
tcp_read_skb() (sk_data_ready->strp_data_ready->tcp_read_sock).
tcp_read_sock() now still updates 'sk->copied_seq', leading to duplicate
updates.
In summary, for strparser + SK_PASS, copied_seq is redundantly calculated
in both tcp_read_sock() and tcp_bpf_recvmsg_parser().
The issue causes incorrect copied_seq calculations, which prevent
correct data reads from the recv() interface in user-land.
We do not want to add new proto_ops to implement a new version of
tcp_read_sock, as this would introduce code complexity [1].
We could have added noack and copied_seq to desc, and then called
ops->read_sock. However, unfortunately, other modules didn’t fully
initialize desc to zero. So, for now, we are directly calling
tcp_read_sock_noack() in tcp_bpf.c.
[1]: https://lore.kernel.org/bpf/20241218053408.437295-1-mrpre@163.com
Fixes: e5c6de5fa0 ("bpf, sockmap: Incorrectly handling copied_seq")
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-3-mrpre@163.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc27c52eea ]
We use map->freeze_mutex to prevent races between map_freeze() and
memory mapping BPF map contents with writable permissions. The way we
naively do this means we'll hold freeze_mutex for entire duration of all
the mm and VMA manipulations, which is completely unnecessary. This can
potentially also lead to deadlocks, as reported by syzbot in [0].
So, instead, hold freeze_mutex only during writeability checks, bump
(proactively) "write active" count for the map, unlock the mutex and
proceed with mmap logic. And only if something went wrong during mmap
logic, then undo that "write active" counter increment.
[0] https://lore.kernel.org/bpf/678dcbc9.050a0220.303755.0066.GAE@google.com/
Fixes: fc9702273e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Reported-by: syzbot+4dc041c686b7c816a71e@syzkaller.appspotmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250129012246.1515826-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98671a0fd1 ]
For all BPF maps we ensure that VM_MAYWRITE is cleared when
memory-mapping BPF map contents as initially read-only VMA. This is
because in some cases BPF verifier relies on the underlying data to not
be modified afterwards by user space, so once something is mapped
read-only, it shouldn't be re-mmap'ed as read-write.
As such, it's not necessary to check VM_MAYWRITE in bpf_map_mmap() and
map->ops->map_mmap() callbacks: VM_WRITE should be consistently set for
read-write mappings, and if VM_WRITE is not set, there is no way for
user space to upgrade read-only mapping to read-write one.
This patch cleans up this VM_WRITE vs VM_MAYWRITE handling within
bpf_map_mmap(), which is an entry point for any BPF map mmap()-ing
logic. We also drop unnecessary sanitization of VM_MAYWRITE in BPF
ringbuf's map_mmap() callback implementation, as it is already performed
by common code in bpf_map_mmap().
Note, though, that in bpf_map_mmap_{open,close}() callbacks we can't
drop VM_MAYWRITE use, because it's possible (and is outside of
subsystem's control) to have initially read-write memory mapping, which
is subsequently dropped to read-only by user space through mprotect().
In such case, from BPF verifier POV it's read-write data throughout the
lifetime of BPF map, and is counted as "active writer".
But its VMAs will start out as VM_WRITE|VM_MAYWRITE, then mprotect() can
change it to just VM_MAYWRITE (and no VM_WRITE), so when its finally
munmap()'ed and bpf_map_mmap_close() is called, vm_flags will be just
VM_MAYWRITE, but we still need to decrement active writer count with
bpf_map_write_active_dec() as it's still considered to be a read-write
mapping by the rest of BPF subsystem.
Similar reasoning applies to bpf_map_mmap_open(), which is called
whenever mmap(), munmap(), and/or mprotect() forces mm subsystem to
split original VMA into multiple discontiguous VMAs.
Memory-mapping handling is a bit tricky, yes.
Cc: Jann Horn <jannh@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250129012246.1515826-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: bc27c52eea ("bpf: avoid holding freeze_mutex during mmap operation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b3d638ca8 ]
KMSAN reported a use-after-free issue in eth_skb_pkt_type()[1]. The
cause of the issue was that eth_skb_pkt_type() accessed skb's data
that didn't contain an Ethernet header. This occurs when
bpf_prog_test_run_xdp() passes an invalid value as the user_data
argument to bpf_test_init().
Fix this by returning an error when user_data is less than ETH_HLEN in
bpf_test_init(). Additionally, remove the check for "if (user_size >
size)" as it is unnecessary.
[1]
BUG: KMSAN: use-after-free in eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
BUG: KMSAN: use-after-free in eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
eth_skb_pkt_type include/linux/etherdevice.h:627 [inline]
eth_type_trans+0x4ee/0x980 net/ethernet/eth.c:165
__xdp_build_skb_from_frame+0x5a8/0xa50 net/core/xdp.c:635
xdp_recv_frames net/bpf/test_run.c:272 [inline]
xdp_test_run_batch net/bpf/test_run.c:361 [inline]
bpf_test_run_xdp_live+0x2954/0x3330 net/bpf/test_run.c:390
bpf_prog_test_run_xdp+0x148e/0x1b10 net/bpf/test_run.c:1318
bpf_prog_test_run+0x5b7/0xa30 kernel/bpf/syscall.c:4371
__sys_bpf+0x6a6/0xe20 kernel/bpf/syscall.c:5777
__do_sys_bpf kernel/bpf/syscall.c:5866 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5864 [inline]
__x64_sys_bpf+0xa4/0xf0 kernel/bpf/syscall.c:5864
x64_sys_call+0x2ea0/0x3d90 arch/x86/include/generated/asm/syscalls_64.h:322
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xd9/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
free_pages_prepare mm/page_alloc.c:1056 [inline]
free_unref_page+0x156/0x1320 mm/page_alloc.c:2657
__free_pages+0xa3/0x1b0 mm/page_alloc.c:4838
bpf_ringbuf_free kernel/bpf/ringbuf.c:226 [inline]
ringbuf_map_free+0xff/0x1e0 kernel/bpf/ringbuf.c:235
bpf_map_free kernel/bpf/syscall.c:838 [inline]
bpf_map_free_deferred+0x17c/0x310 kernel/bpf/syscall.c:862
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa2b/0x1b60 kernel/workqueue.c:3310
worker_thread+0xedf/0x1550 kernel/workqueue.c:3391
kthread+0x535/0x6b0 kernel/kthread.c:389
ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
CPU: 1 UID: 0 PID: 17276 Comm: syz.1.16450 Not tainted 6.12.0-05490-g9bb88c659673 #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-3.fc41 04/01/2014
Fixes: be3d72a289 ("bpf: move user_size out of bpf_test_init")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20250121150643.671650-1-syoshida@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14ad6ed30a ]
Sabrina reported the following splat:
WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0
Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48
RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e
RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6
RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c
R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168
R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007
FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
gro_cells_init+0x1ba/0x270
xfrm_input_init+0x4b/0x2a0
xfrm_init+0x38/0x50
ip_rt_init+0x2d7/0x350
ip_init+0xf/0x20
inet_init+0x406/0x590
do_one_initcall+0x9d/0x2e0
do_initcalls+0x23b/0x280
kernel_init_freeable+0x445/0x490
kernel_init+0x20/0x1d0
ret_from_fork+0x46/0x80
ret_from_fork_asm+0x1a/0x30
</TASK>
irq event stamp: 584330
hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0
hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0
softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470
softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0
on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024)
is smaller than GRO_MAX_HEAD.
Such built additionally contains the revert of the single page frag cache
so that napi_get_frags() ends up using the page frag allocator, triggering
the splat.
Note that the underlying issue is independent from the mentioned
revert; address it ensuring that the small head cache will fit either TCP
and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb()
to select kmalloc() usage for any allocation fitting such cache.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: 3948b05950 ("net: introduce a config option to tweak MAX_SKB_FRAGS")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b6412e697 ]
Xiumei reported hitting the WARN in xfrm6_tunnel_net_exit while
running tests that boil down to:
- create a pair of netns
- run a basic TCP test over ipcomp6
- delete the pair of netns
The xfrm_state found on spi_byaddr was not deleted at the time we
delete the netns, because we still have a reference on it. This
lingering reference comes from a secpath (which holds a ref on the
xfrm_state), which is still attached to an skb. This skb is not
leaked, it ends up on sk_receive_queue and then gets defer-free'd by
skb_attempt_defer_free.
The problem happens when we defer freeing an skb (push it on one CPU's
defer_list), and don't flush that list before the netns is deleted. In
that case, we still have a reference on the xfrm_state that we don't
expect at this point.
We already drop the skb's dst in the TCP receive path when it's no
longer needed, so let's also drop the secpath. At this point,
tcp_filter has already called into the LSM hooks that may require the
secpath, so it should not be needed anymore. However, in some of those
places, the MPTCP extension has just been attached to the skb, so we
cannot simply drop all extensions.
Fixes: 68822bdf76 ("net: generalize skb freeing deferral to per-cpu lists")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/5055ba8f8f72bdcb602faa299faca73c280b7735.1739743613.git.sd@queasysnail.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a370295367 ]
The external PHY will undergo a soft reset twice during the resume process
when it wake up from suspend. The first reset occurs when the axienet
driver calls phylink_of_phy_connect(), and the second occurs when
mdio_bus_phy_resume() invokes phy_init_hw(). The second soft reset of the
external PHY does not reinitialize the internal PHY, which causes issues
with the internal PHY, resulting in the PHY link being down. To prevent
this, setting the mac_managed_pm flag skips the mdio_bus_phy_resume()
function.
Fixes: a129b41fe0 ("Revert "net: phy: dp83867: perform soft reset and retain established link"")
Signed-off-by: Nick Hu <nick.hu@sifive.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250217055843.19799-1-nick.hu@sifive.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4eae0ee0f1 ]
The arp_req_set_public() function is called with the rtnl lock held,
which provides enough synchronization protection. This makes the RCU
variant of dev_getbyhwaddr() unnecessary. Switch to using the simpler
dev_getbyhwaddr() function since we already have the required rtnl
locking.
This change helps maintain consistency in the networking code by using
the appropriate helper function for the existing locking context.
Since we're not holding the RCU read lock in arp_req_set_public()
existing code could trigger false positive locking warnings.
Fixes: 941666c2e3 ("net: RCU conversion of dev_getbyhwaddr() and arp_ioctl()")
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-2-d3d6892db9e1@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b5a28b38c ]
Add dedicated helper for finding devices by hardware address when
holding rtnl_lock, similar to existing dev_getbyhwaddr_rcu(). This prevents
PROVE_LOCKING warnings when rtnl_lock is held but RCU read lock is not.
Extract common address comparison logic into dev_addr_cmp().
The context about this change could be found in the following
discussion:
Link: https://lore.kernel.org/all/20250206-scarlet-ermine-of-improvement-1fcac5@leitao/
Cc: kuniyu@amazon.com
Cc: ushankar@purestorage.com
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250218-arm_fix_selftest-v5-1-d3d6892db9e1@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 4eae0ee0f1 ("arp: switch to dev_getbyhwaddr() in arp_req_set_public()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69ab34f705 ]
Fix how port range keys are handled in __skb_flow_bpf_to_target() by:
- Separating PORTS and PORTS_RANGE key handling
- Using correct key_ports_range structure for range keys
- Properly initializing both key types independently
This ensures port range information is correctly stored in its dedicated
structure rather than incorrectly using the regular ports key structure.
Fixes: 59fb9b62fb ("flow_dissector: Fix to use new variables for port ranges in bpf hook")
Reported-by: Qiang Zhang <dtzq01@gmail.com>
Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/
Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250218043210.732959-4-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e5796862c ]
This patch fixes a bug in TC flower filter where rules combining a
specific destination port with a source port range weren't working
correctly.
The specific case was when users tried to configure rules like:
tc filter add dev ens38 ingress protocol ip flower ip_proto udp \
dst_port 5000 src_port 2000-3000 action drop
The root cause was in the flow dissector code. While both
FLOW_DISSECTOR_KEY_PORTS and FLOW_DISSECTOR_KEY_PORTS_RANGE flags
were being set correctly in the classifier, the __skb_flow_dissect_ports()
function was only populating one of them: whichever came first in
the enum check. This meant that when the code needed both a specific
port and a port range, one of them would be left as 0, causing the
filter to not match packets as expected.
Fix it by removing the either/or logic and instead checking and
populating both key types independently when they're in use.
Fixes: 8ffb055bea ("cls_flower: Fix the behavior using port ranges with hw-offload")
Reported-by: Qiang Zhang <dtzq01@gmail.com>
Closes: https://lore.kernel.org/netdev/CAPx+-5uvFxkhkz4=j_Xuwkezjn9U6kzKTD5jz4tZ9msSJ0fOJA@mail.gmail.com/
Cc: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250218043210.732959-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62fab6eef6 ]
As explained in the previous patch, iterating for_each_netdev() and
gn->geneve_list during ->exit_batch_rtnl() could trigger ->dellink()
twice for the same device.
If CONFIG_DEBUG_LIST is enabled, we will see a list_del() corruption
splat in the 2nd call of geneve_dellink().
Let's remove for_each_netdev() in geneve_destroy_tunnels() and delegate
that part to default_device_exit_batch().
Fixes: 9593172d93 ("geneve: Fix use-after-free in geneve_find_dev().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250217203705.40342-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6093c5ec7 ]
Fix incorrect data offset read in the pd692x0_pi_get_pw_limit callback.
The issue was previously unnoticed as it was only used by the regulator
API and not thoroughly tested, since the PSE is mainly controlled via
ethtool.
The function became actively used by ethtool after commit 3e9dbfec49
("net: pse-pd: Split ethtool_get_status into multiple callbacks"),
which led to the discovery of this issue.
Fix it by using the correct data offset.
Fixes: a87e699c9d ("net: pse-pd: pd692x0: Enhance with new current limit and voltage read callbacks")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250217134812.1925345-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0a5e2bba3 ]
The regulator framework uses current limits, but the PSE standard and
known PSE controllers rely on power limits. Instead of converting
current to power within each driver, perform the conversion in the PSE
core. This avoids redundancy in driver implementation and aligns better
with the standard, simplifying driver development.
Remove at the same time the _pse_ethtool_get_status() function which is
not needed anymore.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: f6093c5ec7 ("net: pse-pd: pd692x0: Fix power limit retrieval")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 675d0e3cac ]
Setting the max_uA constraint in the regulator API imposes a current
limit during the regulator registration process. This behavior conflicts
with preserving the maximum PI power budget configuration across reboots.
Instead, compare the desired current limit to MAX_PI_CURRENT in the
pse_pi_set_current_limit() function to ensure proper handling of the
power budget.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: f6093c5ec7 ("net: pse-pd: pd692x0: Fix power limit retrieval")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5da7c4518 ]
Since commit under Fixes we set the window clamp in accordance
to newly measured rcvbuf scaling_ratio. If the scaling_ratio
decreased significantly we may put ourselves in a situation
where windows become smaller than rcvq_space, preventing
tcp_rcv_space_adjust() from increasing rcvbuf.
The significant decrease of scaling_ratio is far more likely
since commit 697a6c8cec ("tcp: increase the default TCP scaling ratio"),
which increased the "default" scaling ratio from ~30% to 50%.
Hitting the bad condition depends a lot on TCP tuning, and
drivers at play. One of Meta's workloads hits it reliably
under following conditions:
- default rcvbuf of 125k
- sender MTU 1500, receiver MTU 5000
- driver settles on scaling_ratio of 78 for the config above.
Initial rcvq_space gets calculated as TCP_INIT_CWND * tp->advmss
(10 * 5k = 50k). Once we find out the true scaling ratio and
MSS we clamp the windows to 38k. Triggering the condition also
depends on the message sequence of this workload. I can't repro
the problem with simple iperf or TCP_RR-style tests.
Fixes: a2cbb16039 ("tcp: Update window clamping condition")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20250217232905.3162187-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 857ae05549 ]
In the spirit of commit 91751e2482 ("vsock: prevent null-ptr-deref in
vsock_*[has_data|has_space]"), armorize the "impossible" cases with a
warning.
Fixes: 634f1a7110 ("vsock: support sockmap")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fb5bb169d ]
sockmap expects all vsocks to have a transport assigned, which is expressed
in vsock_proto::psock_update_sk_prot(). However, there is an edge case
where an unconnected (connectible) socket may lose its previously assigned
transport. This is handled with a NULL check in the vsock/BPF recv path.
Another design detail is that listening vsocks are not supposed to have any
transport assigned at all. Which implies they are not supported by the
sockmap. But this is complicated by the fact that a socket, before
switching to TCP_LISTEN, may have had some transport assigned during a
failed connect() attempt. Hence, we may end up with a listening vsock in a
sockmap, which blows up quickly:
KASAN: null-ptr-deref in range [0x0000000000000120-0x0000000000000127]
CPU: 7 UID: 0 PID: 56 Comm: kworker/7:0 Not tainted 6.14.0-rc1+
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:vsock_read_skb+0x4b/0x90
Call Trace:
sk_psock_verdict_data_ready+0xa4/0x2e0
virtio_transport_recv_pkt+0x1ca8/0x2acc
vsock_loopback_work+0x27d/0x3f0
process_one_work+0x846/0x1420
worker_thread+0x5b3/0xf80
kthread+0x35a/0x700
ret_from_fork+0x2d/0x70
ret_from_fork_asm+0x1a/0x30
For connectible sockets, instead of relying solely on the state of
vsk->transport, tell sockmap to only allow those representing established
connections. This aligns with the behaviour for AF_INET and AF_UNIX.
Fixes: 634f1a7110 ("vsock: support sockmap")
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdf5d13aa0 ]
Previously, after successfully flushing the xmit buffer to VIOS,
the tx_bytes stat was incremented by the length of the skb.
It is invalid to access the skb memory after sending the buffer to
the VIOS because, at any point after sending, the VIOS can trigger
an interrupt to free this memory. A race between reading skb->len
and freeing the skb is possible (especially during LPM) and will
result in use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
Read of size 4 at addr c00000024eb48a70 by task hxecom/14495
<...>
Call Trace:
[c000000118f66cf0] [c0000000018cba6c] dump_stack_lvl+0x84/0xe8 (unreliable)
[c000000118f66d20] [c0000000006f0080] print_report+0x1a8/0x7f0
[c000000118f66df0] [c0000000006f08f0] kasan_report+0x128/0x1f8
[c000000118f66f00] [c0000000006f2868] __asan_load4+0xac/0xe0
[c000000118f66f20] [c0080000046eac84] ibmvnic_xmit+0x75c/0x1808 [ibmvnic]
[c000000118f67340] [c0000000014be168] dev_hard_start_xmit+0x150/0x358
<...>
Freed by task 0:
kasan_save_stack+0x34/0x68
kasan_save_track+0x2c/0x50
kasan_save_free_info+0x64/0x108
__kasan_mempool_poison_object+0x148/0x2d4
napi_skb_cache_put+0x5c/0x194
net_tx_action+0x154/0x5b8
handle_softirqs+0x20c/0x60c
do_softirq_own_stack+0x6c/0x88
<...>
The buggy address belongs to the object at c00000024eb48a00 which
belongs to the cache skbuff_head_cache of size 224
==================================================================
Fixes: 032c5e8284 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250214155233.235559-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ee73c54a6 ]
Allow tracking of packets sent with send_subcrq direct vs
indirect. `ethtool -S <dev>` will now provide a counter
of the number of uses of each xmit method. This metric will
be useful in performance debugging.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241001163531.1803152-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: bdf5d13aa0 ("ibmvnic: Don't reference skb after sending to VIOS")
Signed-off-by: Sasha Levin <sashal@kernel.org>
