"Acoustic Tuning" debugfs node is a bridge to the acoustic tuning tool
which can tune the chips' acoustic effect.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250507094616.210-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
CS35L63 is a Mono Class-D PC Smart Amplifier, with Speaker Protection
and Audio Enhancement Algorithms.
CS35L63 uses a similar control interface to CS35L56 so support for
it can be added into the CS35L56 driver.
CS35L63 only has SoundWire and I2C control interfaces.
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
SOF will load the function topologies by default. However, user may want
to use the monolithic topology. Add a flag amd a module parameter to
allow user specify the topology or not using function topologies.
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Fix a small bug that can cause the sof_sdw machine driver to fail probe
after the first time it has probed. Also do some minor tidy up on the
handling of the platform_component of the dai links.
Merge series from "Peng Fan (OSS)" <peng.fan@oss.nxp.com>:
This patchset is separate from [1], and not merging changes in one
patch. So separate changes into three patches for each chip.
- sort headers
- Drop legacy platform support
- Convert to GPIO descriptors
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use devm_gpiod_get_optional to get GPIO descriptor with default
polarity GPIOD_OUT_LOW, set consumer name.
- Use gpiod_set_value_cansleep to configure output value.
I not have platforms to test, just do the patches with my best efforts,
and make build pass.
[1] https://lore.kernel.org/all/20250408-asoc-gpio-v1-0-c0db9d3fd6e9@nxp.com/
Initialize current_be_id to 0 in SOF based AMD generic SoundWire machine
driver to handle the unlikely case when there are no devices connected to
a DAI.
In this case create_sdw_dailink() would return without touching the passed
pointer to current_be_id.
Found by gcc -fanalyzer
Cc: stable@vger.kernel.org
Fixes: 6d8348ddc5 ("ASoC: amd: acp: refactor SoundWire machine driver code")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20250506120823.3621604-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Initialize current_be_id to 0 in AMD legacy stack(NO DSP enabled) SoundWire
generic machine driver code to handle the unlikely case when there are no
devices connected to a DAI.
In this case create_sdw_dailink() would return without touching the passed
pointer to current_be_id.
Found by gcc -fanalyzer
Cc: stable@vger.kernel.org
Fixes: 2981d9b078 ("ASoC: amd: acp: add soundwire machine driver for legacy stack")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20250506120823.3621604-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Check subset of link mask when matching the machine driver,
rule is superset match should be ordered before subset matches.
Priority: mockup > most links > most bit link-mask > alphabetical
Reorder acpi_link_adr & sdw_machine tables per defined criteria:
1.Mock Test 1st
2.Most links 1st
3.link_mask with more bit first
4.link_number number order
5.Alphabetical order
Signed-off-by: Naveen Manohar <naveen.m@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20250506014930.5408-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use devm_gpiod_get_optional to get GPIO descriptor with default
polarity GPIOD_OUT_LOW, set consumer name.
- Use gpiod_set_value_cansleep to configure output value.
Checking the current driver using legacy GPIO API, the
reset value is first output HIGH, then LOW, then HIGH.
Checking the datasheet, the device remains in Power-down state until
RESET pin is brought high.
Since the driver has been here for quite long time and no complain on
the reset flow, still follow original flow when using GPIOD
descriptors.
Per datasheet, the DTS polarity should be GPIOD_ACTIVE_LOW. The binding
example use value 0(GPIOD_ACTIVE_HIGH) which seems wrong.
And the binding use reset-gpio as example, not same as driver using
"cirrus,reset-gpio", and there is no in-tree DTS has the device,
so all should be fine with this patch.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250506-csl42x-v3-9-e9496db544c4@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no in-tree user of "include/sound/cs42l52.h", so move
'struct cs42l52_platform_data ' to cs42l52.c and remove the header file.
And platform data is mostly for legacy platforms that create devices
non using device tree. So drop cs42l52.h to prepare using GPIOD API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250506-csl42x-v3-8-e9496db544c4@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use devm_gpiod_get_optional to get GPIO descriptor with default
polarity GPIOD_OUT_LOW, set consumer name.
- Use gpiod_set_value_cansleep to configure output value.
Checking the current driver using legacy GPIO API, the
reset value is first output HIGH, then LOW, then HIGH.
Checking the datasheet, Hold RESET LOW (active) until all the power
supply rails have risen to greater than or equal to the minimum
recommended operating voltages.
Since the driver has been here for quite long time and no complain on
the reset flow, still follow original flow when using GPIOD
descriptors.
Per datasheet, the DTS polarity should be GPIOD_ACTIVE_LOW. The binding
example use value 0(GPIOD_ACTIVE_HIGH) which seems wrong. There is
no in-tree DTS has the device, so all should be fine.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250506-csl42x-v3-6-e9496db544c4@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no in-tree user of "include/sound/cs42l56.h", so move
'struct cs42l73_platform_data ' to cs42l73.c and remove the header file.
And platform data is mostly for legacy platforms that create devices
non using device tree. So drop cs42l73.h to prepare using GPIOD API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250506-csl42x-v3-5-e9496db544c4@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use devm_gpiod_get_optional to get GPIO descriptor with default
polarity GPIOD_OUT_LOW, set consumer name.
- Use gpiod_set_value_cansleep to configure output value.
Checking the current driver using legacy GPIO API, the
nreset value is first output HIGH, then LOW, then HIGH.
Checking the datasheet, nreset is should be held low after power
on, when nreset is high, it starts to work.
Since the driver has been here for quite long time and no complain on
the nreset flow, still follow original flow when using GPIOD
descriptors.
Commit 944004eb56 ("gpiolib: of: add a quirk for reset line for Cirrus
CS42L56 codec") added quirks, so the gpio request API will work as before.
Per datasheet, the DTS polarity should be GPIOD_ACTIVE_LOW. The binding
example use value 0(GPIOD_ACTIVE_HIGH) which seems wrong. There is
no in-tree DTS has the device, so all should be fine.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250506-csl42x-v3-3-e9496db544c4@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no in-tree user of "include/sound/cs42l56.h", so move
'struct cs42l56_platform_data' to cs42l56.c and remove the header file.
And platform data is mostly for platforms that create
devices non using device tree. CS42L56 is a discontinued product,
there is less possibility that new users will use legacy method
to create devices. So drop cs42l56.h to prepare using GPIOD API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250506-csl42x-v3-2-e9496db544c4@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
User can disable the loading function topology feature.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250506113311.45487-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
User will expect the specified topology is used when
override_tplg_filename is set. However, the using function topologies
feature may use the function topologies instead of the specified
topology.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250506113311.45487-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SOF driver will load required function topologies dynamically. However,
we prefer using the monolithic topology. Add a flag to allow user not
using the function topologies.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250506113311.45487-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On CS35L63 the DIE_STS registers are populated by the Firmware from
OTP, so the driver can read these registers directly, rather than
obtaining them from OTP.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-6-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
CS35L63 uses a similar control interface to CS35L56 so support for
it can be added into the CS35L56 driver.
New regmap configs have been added to support CS35L63.
CS35L63 only has SoundWire and I2C control interfaces.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-5-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Registers to set Mute, Volume and Posture are inside firmware,
which means they should be added to the list of registers set inside
firmware, in case they vary across Device or Revision.
These three registers are also used for controls, so additional
handling is required to be able to obtain and set the register inside
ALSA controls.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-4-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Firmware based registers may be different addresses across different
device ids and revision ids. Create a structure to store and access
these addresses.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is to prepare for further products using slightly different
regmap configs.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-2-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP on i.MX8MP doesn't have a direct reset line so according to hardware
design team in order to handle assert/deassert/reset functionality we
need to use a combination of control bits from two modules. Audio block
control module for Run/Stall control of the DSP and DAP module in order
to do software reset.
In a first step, for i.MX8MP we are switching on using the reset
controller API to handle the DSP Run/Stall bits i.MX8MP. This comes with
the advantage of offering a better probe ordering and a more natural way
of abstracting the Audio block control bits.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Tested-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250505114251.57018-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Philipp Stanner <phasta@kernel.org>:
A year ago we spent quite some work trying to get PCI into better shape.
Some pci_ functions can be sometimes managed with devres, which is
obviously bad. We want to provide an obvious API, where pci_ functions
are never, and pcim_ functions are always managed.
Thus, everyone enabling his device with pcim_enable_device() must be
ported to pcim_ functions. Porting all users will later enable us to
significantly simplify parts of the PCI subsystem. See here [1] for
details.
This patch series does that for sound.
Feel free to squash the commits as you see fit.
P.
[1] https://elixir.bootlin.com/linux/v6.14-rc4/source/drivers/pci/devres.c#L18
The static platform_component name string is overwritten on card tear
down by sof_link_unload(). After this has happened the NULL check
on it in asoc_sdw_init_simple_dai_link() will fail when the driver
is reprobed, causing the machine driver to fail probe. However, it
also turns out that the ASoC core sets this string for all topology
systems in soc_check_tplg_fes() anyway, after the aforementioned
NULL check. So there is no need for the machine driver to set
the platform name to anything meaningful at all.
Replace all the platform_component stuff with some simple place
holders and importantly since the core tampers with the
snd_soc_dai_link_component in multiple places allocate a new one
for each usage.
Fixes: 59f8b622d5 ("ASoC: intel/sdw_utils: refactor init_dai_link() and init_simple_dai_link()")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250505141409.2614010-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no point in passing num_platforms into
asoc_sdw_init_simple_dai_link(). Firstly, as a single pointer for the
component name is passed in only a single string can be passed and
secondly if it is a complex DAI with multiple platforms it would make
more sense to use asoc_sdw_init_dai_link().
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250505141409.2614010-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The error checks for pcim_iomap() have the function return -EINVAL.
-ENOMEM is a more appropriate error code.
Replace -EINVAL with -ENOMEM.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250425081742.61623-6-phasta@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Remove the call to pci_release_regions(), since pcim_ functions do
cleanup automatically.
Pass 0 as length parameter to pcim_iomap(), which is the standard way
for ioremapping an entire BAR.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20250425081742.61623-5-phasta@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Remove the goto jump to pci_release_regions(), since pcim_ functions
clean up automatically.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20250425081742.61623-4-phasta@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
pci_request_regions() is a hybrid function which becomes managed if
pcim_enable_device() was called before. This hybrid nature is deprecated
and should not be used anymore.
Replace pci_request_regions() with the always-managed function
pcim_request_all_regions().
Remove surplus calls to PCI release functions, since pcim_ functions do
cleanup automatically.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250425081742.61623-3-phasta@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Just a couple of build fixes on ARM64.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCaBfAmwAKCRCMstVUGiXM
g6N3AQDBWY9AcYbSO/3UnFwi8OSvA89vEDMPhALzg7KIlPGxAQD/e0lWHS39wf3d
1fhRGyMGZCM8PEogrjdw01ZYT9rzJAI=
=poAK
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.15-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Just a couple of build fixes on arm64"
* tag 'perf-tools-fixes-for-v6.15-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf tools: Fix in-source libperf build
perf tools: Fix arm64 build by generating unistd_64.h
- Fix read out of bounds bug in tracing_splice_read_pipe()
The size of the sub page being read can now be greater than a page. But
the buffer used in tracing_splice_read_pipe() only allocates a page size.
The data copied to the buffer is the amount in sub buffer which can
overflow the buffer. Use min((size_t)trace_seq_used(&iter->seq), PAGE_SIZE)
to limit the amount copied to the buffer to a max of PAGE_SIZE.
- Fix the test for NULL from "!filter_hash" to "!*filter_hash"
The add_next_hash() function checked for NULL at the wrong pointer level.
- Do not use the array in trace_adjust_address() if there are no elements
The trace_adjust_address() finds the offset of a module that was stored in
the persistent buffer when reading the previous boot buffer to see if the
address belongs to a module that was loaded in the previous boot. An array
is created that matches currently loaded modules with previously loaded
modules. The trace_adjust_address() uses that array to find the new offset
of the address that's in the previous buffer. But if no module was
loaded, it ends up reading the last element in an array that was never
allocated. Check if nr_entries is zero and exit out early if it is.
- Remove nested lock of trace_event_sem in print_event_fields()
The print_event_fields() function iterates over the ftrace_events list and
requires the trace_event_sem semaphore held for read. But this function is
always called with that semaphore held for read. Remove the taking of the
semaphore and replace it with lockdep_assert_held_read(&trace_event_sem);
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaBeXEBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qvXFAP9JNgi0+ainOppsEP6u9KH+sttxKl76
14EslzuPqbzgOwD/Sm00a8n7m858iv6UN3AAW9AsX2QK5yG0Wbvterm8FgI=
=s9qk
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix read out of bounds bug in tracing_splice_read_pipe()
The size of the sub page being read can now be greater than a page.
But the buffer used in tracing_splice_read_pipe() only allocates a
page size. The data copied to the buffer is the amount in sub buffer
which can overflow the buffer.
Use min((size_t)trace_seq_used(&iter->seq), PAGE_SIZE) to limit the
amount copied to the buffer to a max of PAGE_SIZE.
- Fix the test for NULL from "!filter_hash" to "!*filter_hash"
The add_next_hash() function checked for NULL at the wrong pointer
level.
- Do not use the array in trace_adjust_address() if there are no
elements
The trace_adjust_address() finds the offset of a module that was
stored in the persistent buffer when reading the previous boot buffer
to see if the address belongs to a module that was loaded in the
previous boot. An array is created that matches currently loaded
modules with previously loaded modules. The trace_adjust_address()
uses that array to find the new offset of the address that's in the
previous buffer. But if no module was loaded, it ends up reading the
last element in an array that was never allocated.
Check if nr_entries is zero and exit out early if it is.
- Remove nested lock of trace_event_sem in print_event_fields()
The print_event_fields() function iterates over the ftrace_events
list and requires the trace_event_sem semaphore held for read. But
this function is always called with that semaphore held for read.
Remove the taking of the semaphore and replace it with
lockdep_assert_held_read(&trace_event_sem)
* tag 'trace-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not take trace_event_sem in print_event_fields()
tracing: Fix trace_adjust_address() when there is no modules in scratch area
ftrace: Fix NULL memory allocation check
tracing: Fix oob write in trace_seq_to_buffer()
Camm noticed that on parisc a SIGFPE exception will crash an application with
a second SIGFPE in the signal handler. Dave analyzed it, and it happens
because glibc uses a double-word floating-point store to atomically update
function descriptors. As a result of lazy binding, we hit a floating-point
store in fpe_func almost immediately.
When the T bit is set, an assist exception trap occurs when when the
co-processor encounters *any* floating-point instruction except for a double
store of register %fr0. The latter cancels all pending traps. Let's fix this
by clearing the Trap (T) bit in the FP status register before returning to the
signal handler in userspace.
The issue can be reproduced with this test program:
root@parisc:~# cat fpe.c
static void fpe_func(int sig, siginfo_t *i, void *v) {
sigset_t set;
sigemptyset(&set);
sigaddset(&set, SIGFPE);
sigprocmask(SIG_UNBLOCK, &set, NULL);
printf("GOT signal %d with si_code %ld\n", sig, i->si_code);
}
int main() {
struct sigaction action = {
.sa_sigaction = fpe_func,
.sa_flags = SA_RESTART|SA_SIGINFO };
sigaction(SIGFPE, &action, 0);
feenableexcept(FE_OVERFLOW);
return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308);
}
root@parisc:~# gcc fpe.c -lm
root@parisc:~# ./a.out
Floating point exception
root@parisc:~# strace -f ./a.out
execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
...
rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} ---
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} ---
+++ killed by SIGFPE +++
Floating point exception
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Reported-by: Camm Maguire <camm@maguirefamily.org>
Cc: stable@vger.kernel.org
avoid spurious interrupts, in altera_edac
-----BEGIN PGP SIGNATURE-----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=0/C/
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v6.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Test the correct structure member when handling correctable errors
and avoid spurious interrupts, in altera_edac
* tag 'edac_urgent_for_v6.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/altera: Set DDR and SDMMC interrupt mask before registration
EDAC/altera: Test the correct error reg offset
running at VMPL >0.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6nPf
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix SEV-SNP memory acceptance from the EFI stub for guests
running at VMPL >0"
* tag 'x86-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/sev: Support memory acceptance in the EFI stub under SVSM
- Require group events for branch counter groups and
PEBS counter snapshotting groups to be x86 events.
- Fix the handling of counter-snapshotting of non-precise
events, where counter values may move backwards a bit,
temporarily, confusing the code.
- Restrict perf/KVM PEBS to guest-owned events.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=F7wJ
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf fixes from Ingo Molnar:
- Require group events for branch counter groups and
PEBS counter snapshotting groups to be x86 events.
- Fix the handling of counter-snapshotting of non-precise
events, where counter values may move backwards a bit,
temporarily, confusing the code.
- Restrict perf/KVM PEBS to guest-owned events.
* tag 'perf-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
perf/x86/intel/ds: Fix counter backwards of non-precise events counters-snapshotting
perf/x86/intel: Check the X86 leader for pebs_counter_event_group
perf/x86/intel: Only check the group flag for X86 leader
Commit:
d54d610243 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")
provided a fix for SEV-SNP memory acceptance from the EFI stub when
running at VMPL #0. However, that fix was insufficient for SVSM SEV-SNP
guests running at VMPL >0, as those rely on a SVSM calling area, which
is a shared buffer whose address is programmed into a SEV-SNP MSR, and
the SEV init code that sets up this calling area executes much later
during the boot.
Given that booting via the EFI stub at VMPL >0 implies that the firmware
has configured this calling area already, reuse it for performing memory
acceptance in the EFI stub.
Fixes: fcd042e864 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250428174322.2780170-2-ardb+git@google.com
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
This patch series contains
- ACP sof stack improvements
- Add support for ACP7.1 platform.
- Soundwire IO support for ACP7.0 & ACP7.1 platforms
Link: https://github.com/thesofproject/linux/pull/5392
is_midr_in_range_list() reads beyond the end of these arrays.
-----BEGIN PGP SIGNATURE-----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=fddi
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Add missing sentinels to the arm64 Spectre-BHB MIDR arrays, otherwise
is_midr_in_range_list() reads beyond the end of these arrays"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
A bunch of small fixes. Mostly driver specific.
- An OOB access fix in core UMP rawmidi conversion code
- Fix for ASoC DAPM hw_params widget sequence
- Make retry of usb_set_interface() errors for flaky devices
- Fix redundant USB MIDI name strings
- Quirks for various HP and ASUS models with HD-audio, and
Jabra Evolve 65 USB-audio
- Cirrus Kunit test fixes
- Various fixes for ASoC Intel, stm32, renesas, imx-card, and
simple-card
-----BEGIN PGP SIGNATURE-----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=sF2D
-----END PGP SIGNATURE-----
Merge tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes. Mostly driver specific.
- An OOB access fix in core UMP rawmidi conversion code
- Fix for ASoC DAPM hw_params widget sequence
- Make retry of usb_set_interface() errors for flaky devices
- Fix redundant USB MIDI name strings
- Quirks for various HP and ASUS models with HD-audio, and
Jabra Evolve 65 USB-audio
- Cirrus Kunit test fixes
- Various fixes for ASoC Intel, stm32, renesas, imx-card, and
simple-card"
* tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ASoC: amd: ps: fix for irq handler return status
ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers
ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers
ASoC: stm32: sai: add a check on minimal kernel frequency
ASoC: stm32: sai: skip useless iterations on kernel rate loop
ALSA: hda/realtek - Add more HP laptops which need mute led fixup
ALSA: hda/realtek: Fix built-mic regression on other ASUS models
ASoC: Intel: catpt: avoid type mismatch in dev_dbg() format
ALSA: usb-audio: Fix duplicated name in MIDI substream names
ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx
ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013
ASoC: amd: acp: Fix devm_snd_soc_register_card(acp-pdm-mach) failure
ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot
ASoC: amd: acp: Fix NULL pointer deref on acp resume path
ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS()
ASoC: soc-acpi-intel-ptl-match: add empty item to ptl_cs42l43_l3[]
...
A fairly small pile of fixes, plus one new compatible string addition to
the Synopsis driver for a new platform. The most notable thing is the
fix for divide by zeros in spi-mem if an operation has no dummy bytes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgVU+4ACgkQJNaLcl1U
h9DtiQf/WFONuTRhVXKO7yn3W3ZPP0zWi9RjKH/n8ZW7R6My7y3XwYraPKHsCYvf
xr856tK0hsY2k8Gg7zvE0oCAu+K4kSSV6IXumbj55MMWameermAL8WXgFl/yhFvT
nuU6Rp7EgOY1sl+UUChggb1Kr1xz5MMbrnuECKynFpzxx0RGNymrLNHcC2pl2yF/
nSBwMu2pWTh8SZUoxxDqfH3PQvpyq6i7V28zZ/J9XHz7GhfVwjA6U1xZlXjUuqyq
zP4oABUmktqCaySgRM3aj5mhoIfG/Ywxz8jAt9+hE/Bpo7a5tpxMBVzhBfbPYT3g
x7vYsAJ9yMw9DIdOykuyZ/pcuKPbdg==
=kk6A
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A fairly small pile of fixes, plus one new compatible string addition
to the Synopsis driver for a new platform.
The most notable thing is the fix for divide by zeros in spi-mem if an
operation has no dummy bytes"
* tag 'spi-fix-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: tegra114: Don't fail set_cs_timing when delays are zero
spi: spi-qpic-snand: fix NAND_READ_LOCATION_2 register handling
spi: spi-mem: Add fix to avoid divide error
spi: dt-bindings: snps,dw-apb-ssi: Add compatible for SOPHGO SG2042 SoC
spi: dt-bindings: snps,dw-apb-ssi: Merge duplicate compatible entry
spi: spi-qpic-snand: propagate errors from qcom_spi_block_erase()
spi: stm32-ospi: Fix an error handling path in stm32_ospi_probe()
