[ Upstream commit 08aae78604 ]
Previously loopback for MPV was supposed to be permanently enabled,
however other driver flows were able to over-ride that configuration and
disable it.
Add force_lb parameter that indicates that loopback should always be
enabled which prevents all other driver flows from disabling it.
Fixes: a9a9e68954 ("RDMA/mlx5: Fix vport loopback for MPV device")
Link: https://patch.msgid.link/r/cfc6b1f0f99f8100b087483cc14da6025317f901.1755088808.git.leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a7c18c485 ]
The mlx5 driver currently derives max_qp_wr directly from the
log_max_qp_sz HCA capability:
props->max_qp_wr = 1 << MLX5_CAP_GEN(mdev, log_max_qp_sz);
However, this value represents the number of WQEs in units of Basic
Blocks (see MLX5_SEND_WQE_BB), not actual number of WQEs. Since the size
of a WQE can vary depending on transport type and features (e.g., atomic
operations, UMR, LSO), the actual number of WQEs can be significantly
smaller than the WQEBB count suggests.
This patch introduces a conservative estimation of the worst-case WQE size
— considering largest segments possible with 1 SGE and no inline data or
special features. It uses this to derive a more accurate max_qp_wr value.
Fixes: 938fe83c8d ("net/mlx5_core: New device capabilities handling")
Link: https://patch.msgid.link/r/7d992c9831c997ed5c33d30973406dc2dcaf5e89.1755088725.git.leon@kernel.org
Reported-by: Chuck Lever <cel@kernel.org>
Closes: https://lore.kernel.org/all/20250506142202.GJ2260621@ziepe.ca/
Signed-off-by: Or Har-Toov <ohartoov@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbdd16b818 ]
Introduce a new HID quirk to indicate that this device has to be enabled
after the panel's backlight is enabled, and update the driver data for
the elan devices to enable this quirk. This cannot be a I2C HID quirk
because the kernel needs to acknowledge this before powering up the
device and read the VID/PID. When this quirk is enabled, register
.panel_enabled()/.panel_disabling() instead for the panel follower.
Also rename the *panel_prepare* functions into *panel_follower* because
they could be called in other situations now.
Fixes: bd3cba00dc ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens")
Fixes: d06651bebf ("HID: i2c-hid: elan: Add elan-ekth6a12nay timing")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250818115015.2909525-2-treapking@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2eb22214c1 ]
Some touch controllers have to be powered on after the panel's backlight
is enabled. To support these controllers, introduce .panel_enabled() and
.panel_disabling() to panel_follower_funcs and use them to power on the
device after the panel and its backlight are enabled.
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250818115015.2909525-1-treapking@chromium.org
Stable-dep-of: cbdd16b818 ("HID: i2c-hid: Make elan touch controllers power on after panel is enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba4b8886c2 ]
The duster register needs to be disabled on test patterns. While the
code is correctly doing so, the register address contained a typo, thus
not disabling the duster correctly. Fix the typo.
Fixes: e56616d7b2 ("media: i2c: Add driver for ST VD55G1 camera sensor")
Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01a80b6649 ]
IPU7 ISYS and PSYS auxiliary devices are released after
ipu7_bus_del_devices(), so driver can not reference the MMU devices
from ISYS and PSYS auxiliary devices, so move the MMUs cleanup before
releasing the auxiliary devices.
Fixes: b7fe4c0019 ("media: staging/ipu7: add Intel IPU7 PCI device driver")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
[Sakari Ailus: Drop extra newline.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b065bd213c ]
Commit fd40a63c63 ("drm/atomic: Let drivers decide which planes to
async flip") unintentionally disallowed no-op changes on non-primary
planes that the driver doesn't allow async flips on. This broke async
flips for compositors that disable the cursor plane in every async
atomic commit. To fix that, change drm_atomic_set_property to again
only run atomic_async_check if the plane would actually be changed by
the atomic commit.
Fixes: fd40a63c63 ("drm/atomic: Let drivers decide which planes to async flip")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4263
Signed-off-by: Xaver Hugl <xaver.hugl@kde.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20250822152849.87843-1-xaver.hugl@kde.org
[andrealmeid: fix checkpatch warning]
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 361fa7f813 ]
In otx2_cpt_dl_custom_egrp_create(), strscpy() is called with the length
of the source string rather than the size of the destination buffer.
This is fine as long as the destination buffer is larger than the source
string, but we should still use the destination buffer size instead to
call strscpy() as intended. And since 'tmp_buf' is a fixed-size buffer,
we can safely omit the size argument and let strscpy() infer it using
sizeof().
Fixes: d9d7749773 ("crypto: octeontx2 - add apis for custom engine groups")
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4aa8961b1b ]
At least some panels using the LSB register are not happy with the
unconditional increase of the command buffer to 3 bytes.
With the BOE NE14QDM in my Dell Latitude 7455, the recent patches for
luminance based brightness have introduced a regression: the brightness
range stopped being contiguous and became nonsensical (it probably was
interpreting the last 2 bytes of the buffer and not the first 2).
Change from using a fixed sizeof() to a length variable that's only
set to 3 when luminance is used. Let's leave the default as 2 even for
the single-byte version, since that's how it worked before.
Fixes: f2db78e37f ("drm/dp: Modify drm_edp_backlight_set_level")
Signed-off-by: Val Packett <val@packett.cool>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250706204446.8918-1-val@packett.cool
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e8f4c2b2b ]
mount -t f2fs -o checkpoint=disable:10% /dev/vdb /mnt/f2fs/
mount -t f2fs -o remount,checkpoint=enable /dev/vdb /mnt/f2fs/
kernel log:
F2FS-fs (vdb): Adjust unusable cap for checkpoint=disable = 204440 / 10%
If we has assigned checkpoint=enable mount option, unusable_cap{,_perc}
parameters of checkpoint=disable should be reset, then calculation and
log print could be avoid in adjust_unusable_cap_perc().
Fixes: 1ae18f71cb ("f2fs: fix checkpoint=disable:%u%%")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edb35b1ffc ]
Check for NULL return value with dma_alloc_coherent(), because DMA
address is not always set by dma_alloc_coherent() on failure.
Fixes: 7726618639 ("scsi: myrs: Add Mylex RAID controller (SCSI interface)")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://lore.kernel.org/r/20250725083112.43975-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68889dfd54 ]
When sk_alloc() allocates a socket, mem_cgroup_sk_alloc() sets
sk->sk_memcg based on the current task.
MPTCP subflow socket creation is triggered from userspace or
an in-kernel worker.
In the latter case, sk->sk_memcg is not what we want. So, we fix
it up from the parent socket's sk->sk_memcg in mptcp_attach_cgroup().
Although the code is placed under #ifdef CONFIG_MEMCG, it is buried
under #ifdef CONFIG_SOCK_CGROUP_DATA.
The two configs are orthogonal. If CONFIG_MEMCG is enabled without
CONFIG_SOCK_CGROUP_DATA, the subflow's memory usage is not charged
correctly.
Let's move the code out of the wrong ifdef guard.
Note that sk->sk_memcg is freed in sk_prot_free() and the parent
sk holds the refcnt of memcg->css here, so we don't need to use
css_tryget().
Fixes: 3764b0c565 ("mptcp: attach subflow socket to parent cgroup")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Link: https://patch.msgid.link/20250815201712.1745332-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad70c6bc77 ]
For a direct attached device, attached_phy contains the local phy id.
For a device behind an expander, attached_phy contains the remote phy
id, not the local phy id.
The pm8001_ha->phy array only contains the phys of the HBA. It does not
contain the phys of the expander.
Thus, you cannot use attached_phy to index the pm8001_ha->phy array,
without first verifying that the device is directly attached.
Use the pm80xx_get_local_phy_id() helper to make sure that we use the
local phy id to index the array, regardless if the device is directly
attached or not.
Fixes: 869ddbdcae ("scsi: pm80xx: corrected SATA abort handling sequence.")
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-21-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4ec98303f ]
Avoid duplicated code by adding a helper to get the local phy id.
No functional changes intended.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-20-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: ad70c6bc77 ("scsi: pm80xx: Fix pm8001_abort_task() for chip_8006 when using an expander")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35e388696c ]
Make use of the dev_parent_is_expander() helper.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-19-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: ad70c6bc77 ("scsi: pm80xx: Fix pm8001_abort_task() for chip_8006 when using an expander")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5eb72c92e ]
Many libsas drivers check if the parent of the device is an expander.
Create a helper that the libsas drivers will use in follow up commits.
Suggested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-15-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stable-dep-of: ad70c6bc77 ("scsi: pm80xx: Fix pm8001_abort_task() for chip_8006 when using an expander")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 251be2f603 ]
Since commit f7b705c238 ("scsi: pm80xx: Set phy_attached to zero when
device is gone") UBSAN reports:
UBSAN: array-index-out-of-bounds in drivers/scsi/pm8001/pm8001_sas.c:786:17
index 28 is out of range for type 'pm8001_phy [16]'
on rmmod when using an expander.
For a direct attached device, attached_phy contains the local phy id.
For a device behind an expander, attached_phy contains the remote phy
id, not the local phy id.
I.e. while pm8001_ha will have pm8001_ha->chip->n_phy local phys, for a
device behind an expander, attached_phy can be much larger than
pm8001_ha->chip->n_phy (depending on the amount of phys of the
expander).
E.g. on my system pm8001_ha has 8 phys with phy ids 0-7. One of the
ports has an expander connected. The expander has 31 phys with phy ids
0-30.
The pm8001_ha->phy array only contains the phys of the HBA. It does not
contain the phys of the expander. Thus, it is wrong to use attached_phy
to index the pm8001_ha->phy array for a device behind an expander.
Thus, we can only clear phy_attached for devices that are directly
attached.
Fixes: f7b705c238 ("scsi: pm80xx: Set phy_attached to zero when device is gone")
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-14-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eeee108607 ]
Commit 0f630c58e3 ("scsi: pm80xx: Do not use libsas port ID") broke
support for expanders. After the commit, devices behind an expander are
no longer detected.
Simply reverting the commit restores support for devices behind an
expander.
Instead of reverting the commit (and reintroducing a helper to get the
port), get the port directly from the lldd_port pointer in struct
asd_sas_port.
Fixes: 0f630c58e3 ("scsi: pm80xx: Do not use libsas port ID")
Suggested-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20250814173215.1765055-13-cassel@kernel.org
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f059e4732 ]
Use kvfree() to free memory allocated by kvzalloc() instead of kfree().
Avoid potential memory management issue considering kvzalloc() can
internally choose to use either kmalloc() or vmalloc() based on memory
request and current system memory state. Hence, use more appropriate
kvfree() which automatically determines correct free method to avoid
potential hard to debug memory issues. Fix this issue discovered by
running spatch static analysis tool using coccinelle script -
scripts/coccinelle/api/kfree_mismatch.cocci
Fixes: 52929c2142 ("fwctl/mlx5: Support for communicating with mlx5 fw")
Link: https://patch.msgid.link/r/aKAjCoF9cT3VEbSE@bhairav-test.ee.iitb.ac.in
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efaa2d815a ]
Compile-testing this driver is only possible when the AMBA bus driver is
available in the kernel:
x86_64-linux-ld: drivers/char/hw_random/nomadik-rng.o: in function `nmk_rng_remove':
nomadik-rng.c:(.text+0x67): undefined reference to `amba_release_regions'
x86_64-linux-ld: drivers/char/hw_random/nomadik-rng.o: in function `nmk_rng_probe':
nomadik-rng.c:(.text+0xee): undefined reference to `amba_request_regions'
x86_64-linux-ld: nomadik-rng.c:(.text+0x18d): undefined reference to `amba_release_regions'
The was previously implied by the 'depends on ARCH_NOMADIK', but needs to be
specified for the COMPILE_TEST case.
Fixes: d5e93b3374 ("hwrng: Kconfig - Add helper dependency on COMPILE_TEST")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e53be21dd ]
sg_nents_for_len() returns an int which is negative in case of error.
Fixes: 472b04444c ("crypto: keembay - Add Keem Bay OCS HCU driver")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf4e4b97d0 ]
The function dc_stream_set_cursor_attributes() currently dereferences
the `stream` pointer and nested members `stream->ctx->dc->current_state`
without checking for NULL.
All callers of these functions, such as in
`dcn30_apply_idle_power_optimizations()` and
`amdgpu_dm_plane_handle_cursor_update()`, already perform NULL checks
before calling these functions.
Fixes below:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c:336 dc_stream_program_cursor_attributes()
error: we previously assumed 'stream' could be null (see line 334)
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c
327 bool dc_stream_program_cursor_attributes(
328 struct dc_stream_state *stream,
329 const struct dc_cursor_attributes *attributes)
330 {
331 struct dc *dc;
332 bool reset_idle_optimizations = false;
333
334 dc = stream ? stream->ctx->dc : NULL;
^^^^^^
The old code assumed stream could be NULL.
335
--> 336 if (dc_stream_set_cursor_attributes(stream, attributes)) {
^^^^^^
The refactor added an unchecked dereference.
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_stream.c
313 bool dc_stream_set_cursor_attributes(
314 struct dc_stream_state *stream,
315 const struct dc_cursor_attributes *attributes)
316 {
317 bool result = false;
318
319 if (dc_stream_check_cursor_attributes(stream, stream->ctx->dc->current_state, attributes)) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Here.
This function used to check for if stream as NULL and return false at
the start. Probably we should add that back.
Fixes: 4465dd0e41 ("drm/amd/display: Refactor SubVP cursor limiting logic")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Ray Wu <ray.wu@amd.com>
Cc: Dillon Varone <dillon.varone@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Dillon Varone <Dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ad82f9db1 ]
Commit eefb83790a ("misc: pci_endpoint_test: Add doorbell test case")
added NO_BAR (-1) to the pci_barno enum which, in practical terms,
changes the enum from an unsigned int to a signed int. If the user
passes a negative number in pci_endpoint_test_ioctl() then it results in
an array underflow in pci_endpoint_test_bar().
Fixes: eefb83790a ("misc: pci_endpoint_test: Add doorbell test case")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/aIzzZ4vc6ZrmM9rI@suswa
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab81f2f79c ]
When devm_add_action_or_reset() fails, it calls the passed cleanup
function. Hence the caller must not repeat that cleanup.
Replace the "goto err_regulator_free" by the actual freeing, as there
will never be a need again for a second user of this label.
Fixes: 75996c92f4 ("PCI/pwrctrl: Add pwrctrl driver for PCI slots")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # V4H Sparrow Hawk
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/7b1386e6162e70e6d631c87f6323d2ab971bc1c5.1755100324.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0485e864a ]
EUD_MODE_MANAGER2 register is mapped to a memory region that is marked
as read-only for operating system running at EL1, enforcing access
restrictions that prohibit direct memory-mapped writes via writel().
Attempts to write to this region from HLOS can result in silent failures
or memory access violations, particularly when toggling EUD (Embedded
USB Debugger) state. To ensure secure register access, modify the driver
to use qcom_scm_io_writel(), which routes the write operation to Qualcomm
Secure Channel Monitor (SCM). SCM has the necessary permissions to access
protected memory regions, enabling reliable control over EUD state.
SC7280, the only user of EUD is also affected, indicating that this could
never have worked on a properly fused device.
Fixes: 9a1bf58ccd ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)")
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250731-eud_mode_manager_secure_access-v8-1-4a5dcbb79f41@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 186e8f2bdb ]
The kthread_run() function returns error pointers so the
max3421_hcd->spi_thread pointer can be either error pointers or NULL.
Check for both before dereferencing it.
Fixes: 05dfa5c9bc ("usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aJTMVAPtRe5H6jug@stanley.mountain
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04864af849 ]
Use the "adjusted_mode" for the dsi configuration check, as that is the
more appropriate display_mode for validation, and later bridge enable.
Also, fix the mode_valid_check parameter from false to true, as the dsi
configuration check is taking place during the check-phase, and the
crtc_* mode values are not expected to be populated yet.
Fixes: a53d987756 ("drm/bridge: cdns-dsi: Move DSI mode check to _atomic_check()")
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250723-cdns-dsi-impro-v5-1-e61cc06074c2@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7bb14b61b7 ]
The boot firmware may disable the U3 port early during boot and leave it
up to the controller or PHY driver to re-enable U3 when needed.
The Rockchip USBDP PHY driver currently does this for RK3576 and RK3588,
something the Rockchip Naneng Combo PHY driver never does for RK3568.
This may result in USB 3.0 ports being limited to only using USB 2.0 or
in special cases not working at all on RK3568.
Write to PIPE_GRF USB3OTGx_CON1 reg to ensure the U3 port is enabled
when a PHY with PHY_TYPE_USB3 mode is used.
Fixes: 7160820d74 ("phy: rockchip: add naneng combo phy for RK3568")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250723072324.2246498-1-jonas@kwiboo.se
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc322d13cf ]
The zoran_fh structure is a wrapper around v4l2_fh. Its usage has been
mostly removed by commit 83f89a8bcb ("media: zoran: convert to vb2"),
but the structure stayed by mistake. It is now used in a single
location, assigned from a void pointer and then recast to a void
pointer, without being every accessed. Drop it.
Fixes: 83f89a8bcb ("media: zoran: convert to vb2")
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a84eeacbf9 ]
steelseries_srws1_probe() still does not use devm_kzalloc() and
devm_led_classdev_register(), so there is a lot of code to safely manage
heap, which reduces readability and may cause memory leaks due to minor
patch mistakes in the future.
Therefore, it should be changed to use devm_kzalloc() and
devm_led_classdev_register() to easily and safely manage heap.
Also, the current steelseries driver mainly checks sd->quriks to determine
which product a specific HID device is, which is not the correct way.
remove(), unlike probe(), does not receive struct hid_device_id as an
argument, so it must check hdev unconditionally to know which product
it is.
However, since struct steelseries_device and struct steelseries_srws1_data
have different structures, if SRWS1 is removed in remove(), converts
hdev->dev, which is initialized to struct steelseries_srws1_data,
to struct steelseries_device and uses it. This causes various
memory-related bugs as completely unexpected values exist in member
variables of the structure.
Therefore, in order to modify probe() and remove() to work properly,
Arctis 1, 9 should be added to HID_USB_DEVICE and some functions should be
modified to check hdev->product when determining HID device product.
Fixes: a0c76896c3 ("HID: steelseries: Add support for Arctis 1 XBox")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26a8bf978a ]
Some users report that the LED blinking breaks AP mode somehow. Most
likely the LED code and the dynamic mechanism are trying to access the
hardware registers at the same time. Fix it by locking rtwdev->mutex
before setting the LED and unlocking it after.
Fixes: 4b6652bc6d ("wifi: rtw88: Add support for LED blinking")
Closes: https://github.com/lwfinger/rtw88/issues/305
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/ed69fa07-8678-4a40-af44-65e7b1862197@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b2cd50921 ]
generic/091 may fail, then it bisects to the bad commit ba8dac350f
("f2fs: fix to zero post-eof page").
What will cause generic/091 to fail is something like below Testcase #1:
1. write 16k as compressed blocks
2. truncate to 12k
3. truncate to 20k
4. verify data in range of [12k, 16k], however data is not zero as
expected
Script of Testcase #1
mkfs.f2fs -f -O extra_attr,compression /dev/vdb
mount -t f2fs -o compress_extension=* /dev/vdb /mnt/f2fs
dd if=/dev/zero of=/mnt/f2fs/file bs=12k count=1
dd if=/dev/random of=/mnt/f2fs/file bs=4k count=1 seek=3 conv=notrunc
sync
truncate -s $((12*1024)) /mnt/f2fs/file
truncate -s $((20*1024)) /mnt/f2fs/file
dd if=/mnt/f2fs/file of=/mnt/f2fs/data bs=4k count=1 skip=3
od /mnt/f2fs/data
umount /mnt/f2fs
Analisys:
in step 2), we will redirty all data pages from #0 to #3 in compressed
cluster, and zero page #3,
in step 3), f2fs_setattr() will call f2fs_zero_post_eof_page() to drop
all page cache post eof, includeing dirtied page #3,
in step 4) when we read data from page #3, it will decompressed cluster
and extra random data to page #3, finally, we hit the non-zeroed data
post eof.
However, the commit ba8dac350f ("f2fs: fix to zero post-eof page") just
let the issue be reproduced easily, w/o the commit, it can reproduce this
bug w/ below Testcase #2:
1. write 16k as compressed blocks
2. truncate to 8k
3. truncate to 12k
4. truncate to 20k
5. verify data in range of [12k, 16k], however data is not zero as
expected
Script of Testcase #2
mkfs.f2fs -f -O extra_attr,compression /dev/vdb
mount -t f2fs -o compress_extension=* /dev/vdb /mnt/f2fs
dd if=/dev/zero of=/mnt/f2fs/file bs=12k count=1
dd if=/dev/random of=/mnt/f2fs/file bs=4k count=1 seek=3 conv=notrunc
sync
truncate -s $((8*1024)) /mnt/f2fs/file
truncate -s $((12*1024)) /mnt/f2fs/file
truncate -s $((20*1024)) /mnt/f2fs/file
echo 3 > /proc/sys/vm/drop_caches
dd if=/mnt/f2fs/file of=/mnt/f2fs/data bs=4k count=1 skip=3
od /mnt/f2fs/data
umount /mnt/f2fs
Anlysis:
in step 2), we will redirty all data pages from #0 to #3 in compressed
cluster, and zero page #2 and #3,
in step 3), we will truncate page #3 in page cache,
in step 4), expand file size,
in step 5), hit random data post eof w/ the same reason in Testcase #1.
Root Cause:
In f2fs_truncate_partial_cluster(), after we truncate partial data block
on compressed cluster, all pages in cluster including the one post eof
will be dirtied, after another tuncation, dirty page post eof will be
dropped, however on-disk compressed cluster is still valid, it may
include non-zero data post eof, result in exposing previous non-zero data
post eof while reading.
Fix:
In f2fs_truncate_partial_cluster(), let change as below to fix:
- call filemap_write_and_wait_range() to flush dirty page
- call truncate_pagecache() to drop pages or zero partial page post eof
- call f2fs_do_truncate_blocks() to truncate non-compress cluster to
last valid block
Fixes: 3265d3db1f ("f2fs: support partial truncation on compressed inode")
Reported-by: Jan Prusakowski <jprusakowski@google.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fe1c6bec5 ]
Should cast type of folio->index from pgoff_t to loff_t to avoid overflow
while left shift operation.
Fixes: 3265d3db1f ("f2fs: support partial truncation on compressed inode")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e75ce11790 ]
If reserve_root mount option is not assigned, __allow_reserved_blocks()
will return false, it's not correct, fix it.
Fixes: 7e65be49ed ("f2fs: add reserved blocks for root user")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 260dcf5b06 ]
GCC 16 enables -Werror=unused-but-set-variable= which results in build
error with the following message.
drivers/gpu/drm/radeon/r600_cs.c: In function ‘r600_texture_size’:
drivers/gpu/drm/radeon/r600_cs.c:1411:29: error: variable ‘level’ set but not used [-Werror=unused-but-set-variable=]
1411 | unsigned offset, i, level;
| ^~~~~
cc1: all warnings being treated as errors
make[6]: *** [scripts/Makefile.build:287: drivers/gpu/drm/radeon/r600_cs.o] Error 1
level although is set, but in never used in the function
r600_texture_size. Thus resulting in dead code and this error getting
triggered.
Fixes: 60b212f8dd ("drm/radeon: overhaul texture checking. (v3)")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57a75fa9d5 ]
The pci_epc_get() function returns error pointers. It never returns NULL.
Update the check to match.
Fixes: 1c3b002c6b ("PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/aIzCdV8jyBeql-Oa@stanley.mountain
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d22db6d07 ]
When power management is not enabled in the kernel build, the newly
added hibernation changes cause a link failure:
arm-linux-gnueabi-ld: drivers/gpu/drm/amd/amdgpu/amdgpu_drv.o: in function `amdgpu_pmops_thaw':
amdgpu_drv.c:(.text+0x1514): undefined reference to `pm_hibernate_is_recovering'
Make the power management code in this driver conditional on
CONFIG_PM and CONFIG_PM_SLEEP
Fixes: 530694f54d ("drm/amdgpu: do not resume device in thaw for normal hibernation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250714081635.4071570-1-arnd@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
