The core kernel already supports parallel bringup of secondary
CPUs (aka HOTPLUG_PARALLEL). The x86 and MIPS architectures
already use HOTPLUG_PARALLEL and ARM is also moving toward it.
On RISC-V, there is no arch specific global data accessed in the
RISC-V secondary CPU bringup path so enabling HOTPLUG_PARALLEL for
RISC-V would only require:
1) Providing RISC-V specific arch_cpuhp_kick_ap_alive()
2) Calling cpuhp_ap_sync_alive() from smp_callin()
This patch is tested natively with OpenSBI on QEMU RV64 virt machine
with 64 cores and also tested with KVM RISC-V guest with 32 VCPUs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Link: https://patch.msgid.link/20250905122512.71684-1-apatel@ventanamicro.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Replace goto-based error handling with early return pattern in
imx_dsp_rproc_{start,stop}() functions, and simplify if-else logic.
No functional changes, only code structure improvements for better
maintainability.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-12-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
strcpy() has been deprecated [1] because it performs no bounds checking
on the destination buffer, which can lead to buffer overflows. Replace
it with the safer strscpy_pad(), and use kmalloc() instead of kzalloc()
because strscpy_pad() zero-pads the destination buffer and therefore
avoids writing to it twice.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20251119135217.233084-1-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is no user of enum imx_rproc_method after moved to ops based
method. Remove it.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-11-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Introduce imx_dsp_rproc_reset_ctr_{start, stop, detect_mode}() helper
functions for i.MX variants using IMX_RPROC_RESET_CONTROLLER to manage
remote processors.
Allows the removal of the IMX_RPROC_RESET_CONTROLLER switch-case blocks
from imx_dsp_rproc_[start,stop,detect_mode](), resulting in cleaner and
more maintainable code.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-10-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Introduce imx_dsp_rproc_scu_api_{start, stop, detect_mode}() helper
functions for i.MX variants using IMX_RPROC_SCU_API to manage remote
processors.
Allows the removal of the IMX_RPROC_SCU_API switch-case blocks from
imx_dsp_rproc_[start,stop,detect_mode](), resulting in cleaner and more
maintainable code.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-9-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The panel operated in low-power mode, with exception of changing the
brightness levels.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-11-6cd55471e84e@ixit.cz
Compatible should correspond to the panel used and the driver currently
supports only AMS628NW01 panel. Adapt the internal driver structures to
reflect the name.
Original, not very descriptive, compatible is kept to ensure compatibility
with older device-trees.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-9-6cd55471e84e@ixit.cz
Initialising at max brightness is not necessary.
Half brightness is much more comfortable.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-8-6cd55471e84e@ixit.cz
This corrects the host initialisation sequence so that we can send
DSI/DCS commands in prepare().
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-7-6cd55471e84e@ixit.cz
Introducing the macro make the code a bit clearer.
Looking at other Samsung drivers, I assume it's lvl2, thou due to not
available documentation it's only educated guess.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-6-6cd55471e84e@ixit.cz
It's not possible to send DSI panel commands in the .unprepare. Move it
to .disable and do similar for prepare, where we move the display on to
the .enable.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-5-6cd55471e84e@ixit.cz
Recently we documented, there is more than vddio regulator, adapt the
driver to work with VCI and POC regulator.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-4-6cd55471e84e@ixit.cz
Remove leftover from s6e3fc2x01 support drop and clarify supported panel.
The Samsung SOFEF00 DDIC is used in multiple phones, so describe it
properly and generalize.
Fixes: e1eb7293ab ("drm/panel: samsung-sofef00: Drop s6e3fc2x01 support")
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-3-6cd55471e84e@ixit.cz
Reason for moving from simple panel is this DDIC has three supplies,
while panel-simple-dsi is limited to one.
Previous compatible only described the DDIC, but didn't include panel
connected to it. Let's fix it, and offer bindings authors two
compatibles to distinguish the connected panel.
Basic description for SOFEF00 DDIC with attached panels
- Samsung AMS601NT22 6.01 inch, 1080x2160 pixels, 18:9 ratio
- Samsung AMS628NW01 6.28 inch, 1080x2280 pixels, 19:9 ratio
There is only one user which uses samsung,sofef00 and it's updated to
comply within this patch series.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251119-sofef00-rebuild-v3-1-6cd55471e84e@ixit.cz
Introduce imx_dsp_rproc_mmio_{start, stop, detect_mode}() helper functions
for i.MX variants using IMX_RPROC_MMIO to manage remote processors.
Allows the removal of the IMX_RPROC_MMIO switch-case blocks from
imx_dsp_rproc_[start,stop,detect_mode](), resulting in cleaner and more
maintainable code.
No functional changes.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-8-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
W552946AAA is a panel by Wanchanglong. This panel utilizes the
Ilitek ILI9881D controller.
W552946AAA is similar to W552946ABA, but the W552946AAA only
uses 2 lanes.
Tested on rk3506g-evb1-v10.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251106020632.92-6-kernel@airkyi.com
Like w552946aba, w552946aaa uses the Ilitek ILI9881D controller chip,
and it supports up to 2 lanes.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251106020632.92-2-kernel@airkyi.com
Move the imx_dsp_rproc_dcfg structure definitions closer to
imx_dsp_rproc_of_match to prepare for adding start/stop/detect_mode ops for
each i.MX variant.
Avoids the need to declare function prototypes such as
'static int imx_dsp_rproc_mbox_init(struct imx_dsp_rproc *priv)' at the
beginning of the file, improving code organization and readability.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-7-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The ronbo-rb070d30 controles the various gpios for reset, standby,
vertical and horizontal flip using the non-sleeping gpiod_set_value()
function.
Switch to using gpiod_set_value_cansleep() when controlling reset_gpio to
support GPIO providers that may sleep, such as I2C GPIO expanders.
This fixes noisy complaints in kernel log for gpio providers that do
sleep.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251117-imx8mp-hb-iiot-v3-5-bf1a4cf5fa8e@solid-run.com
Add missing ref on panel-common.yaml for this dsi panel so that common
properties can be shared.
Drop reset-gpios and backlight as they are already in panel-common.
Switch from additionalProperties to unevaluatedProperties so that common
panel properties are available without repeating them in this binding.
Notably panel-common defines the "port" property for linking panels to a
source - which was missing from this panel. Mark it as required.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251117-imx8mp-hb-iiot-v3-2-bf1a4cf5fa8e@solid-run.com
Allow each platform to provide its own implementation of start/stop/
detect_mode operations, and prepare to eliminate the need for multiple
switch-case statements.
Improve code readability and maintainability by encapsulating
platform-specific behavior.
No functional changes.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-6-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The DRM_DEV_ERROR() has been deprecated, and use dev_err_probe()
can be better. The other reason is that dev_err_probe() help avoid
unexpected repeated err logs during defered probing.
Signed-off-by: Abhishek Rajput <abhiraj21put@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251117064702.222424-1-abhiraj21put@gmail.com
Drop extra space between return and zero.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-5-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Add support for the Raystar RFF500F-AWH-DNN 5.0" TFT 840x480 LVDS panel.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251115025827.3113790-3-festevam@gmail.com
Use dev_err_probe() to simplify the code. No functional change.
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-4-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Samsung LTL106AL01 is a 10.6" FWXGA (1366x768) simple LVDS panel found in
Microsoft Surface RT tablet.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251110091440.5251-6-clamor95@gmail.com
The LD070WX3 is a Color Active Matrix Liquid Crystal Display with an
integral Light Emitting Diode (LED) backlight system. The matrix employs
a-Si Thin Film Transistor as the active element. It is a transmissive type
display operating in the normally Black mode. This TFT-LCD has 7.0 inches
diagonally measured active display area with WXGA resolution (800 by 1280
pixel array).
LG LD070WX3-SL01 MIPI DSI panel was treated as simple DSI panel when it is
actually not and requires proper setup for correct work. Simple panel work
relied on preliminary configuration done by bootloader.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251110091440.5251-3-clamor95@gmail.com
LG LD070WX3-SL01 was mistakenly documented as a simple DSI panel, which it
clearly is not. Address this by adding the proper schema for this panel.
There is only one user of this panel binding in the mainline Linux kernel,
which is the Nvidia tablet Tegra Note 7. Its panel is broken anyway since
it cannot initialize properly if the bootloader does not leave a
pre-initialized panel. It also cannot suspend or re-initialize properly,
since no DSI configuration is set and it has a loose regulator which
relies on an always-on property rather than being hooked to the panel
where it belongs.
Tegra Note 7 device tree is adjusted as a part of this series.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251110091440.5251-2-clamor95@gmail.com
Current code on the cleanup path just disables runtime PM for a device.
Using resource managed version devm_pm_runtime_enable() registers a cleanup
callback that sets autosuspend to false and then disables runtime PM for
a device. So, basically the same functionality as we don't use autosuspend
anyway.
As a result, the .remove callback is no longer needed, reducing boilerplate
code.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-3-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Replace manual rproc_add() and cleanup logic with devm_rproc_add(), which
ties the remoteproc lifecycle to the device's lifecycle. This simplifies
error handling and ensures proper cleanup.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-2-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Refactor imx_dsp_attach_pm_domains() to use devm_pm_domain_attach_list()
directly, removing manual detach logic and simplifying resource management.
Also replace verbose error handling in imx_dsp_rproc_probe() with
dev_err_probe() for cleaner and more consistent error reporting.
No functional changes.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Tested-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20251119-imx-dsp-2025-11-19-v4-1-adafd342d07b@nxp.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
A multi-thread customer workload with large memory footprint uses
fork()/exec() to run some external programs every tens seconds. When
running the workload on an arm64 server machine, it's observed that
quite some CPU cycles are spent in the TLB flushing functions. While
running the workload on the x86_64 server machine, it's not. This
causes the performance on arm64 to be much worse than that on x86_64.
During the workload running, after fork()/exec() write-protects all
pages in the parent process, memory writing in the parent process
will cause a write protection fault. Then the page fault handler
will make the PTE/PDE writable if the page can be reused, which is
almost always true in the workload. On arm64, to avoid the write
protection fault on other CPUs, the page fault handler flushes the TLB
globally with TLBI broadcast after changing the PTE/PDE. However, this
isn't always necessary. Firstly, it's safe to leave some stale
read-only TLB entries as long as they will be flushed finally.
Secondly, it's quite possible that the original read-only PTE/PDEs
aren't cached in remote TLB at all if the memory footprint is large.
In fact, on x86_64, the page fault handler doesn't flush the remote
TLB in this situation, which benefits the performance a lot.
To improve the performance on arm64, make the write protection fault
handler flush the TLB locally instead of globally via TLBI broadcast
after making the PTE/PDE writable. If there are stale read-only TLB
entries in the remote CPUs, the page fault handler on these CPUs will
regard the page fault as spurious and flush the stale TLB entries.
To test the patchset, make the usemem.c from
vm-scalability (https://git.kernel.org/pub/scm/linux/kernel/git/wfg/vm-scalability.git).
support calling fork()/exec() periodically. To mimic the behavior of
the customer workload, run usemem with 4 threads, access 100GB memory,
and call fork()/exec() every 40 seconds. Test results show that with
the patchset the score of usemem improves ~40.6%. The cycles% of TLB
flush functions reduces from ~50.5% to ~0.3% in perf profile.
Signed-off-by: Huang Ying <ying.huang@linux.alibaba.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Yin Fengwei <fengwei_yin@linux.alibaba.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Reviewed-by: David Hildenbrand (Red Hat) <david@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The page faults may be spurious because of the racy access to the page
table. For example, a non-populated virtual page is accessed on 2
CPUs simultaneously, thus the page faults are triggered on both CPUs.
However, it's possible that one CPU (say CPU A) cannot find the reason
for the page fault if the other CPU (say CPU B) has changed the page
table before the PTE is checked on CPU A. Most of the time, the
spurious page faults can be ignored safely. However, if the page
fault is for the write access, it's possible that a stale read-only
TLB entry exists in the local CPU and needs to be flushed on some
architectures. This is called the spurious page fault fixing.
In the current kernel, there is spurious fault fixing support for pte,
but not for huge pmd because no architectures need it. But in the
next patch in the series, we will change the write protection fault
handling logic on arm64, so that some stale huge pmd entries may
remain in the TLB. These entries need to be flushed via the huge pmd
spurious fault fixing mechanism.
Signed-off-by: Huang Ying <ying.huang@linux.alibaba.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Yin Fengwei <fengwei_yin@linux.alibaba.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This is the only Kconfig symbol that depends on OF while selecting the common
driver for several chips. Drop this unneeded dependency and make the component
available on non-OF systems along with wider compile test.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251111105320.750131-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20251111052451.3687740-1-nichen@iscas.ac.cn
Signed-off-by: Lee Jones <lee@kernel.org>
We need to directly allocate the cred's LSM state for the initial task
when we initialize the LSM framework. Unfortunately, this results in a
RCU related type mismatch, use the unrcu_pointer() macro to handle this
a bit more elegantly.
The explicit type casting still remains as we need to work around the
constification of current->cred in this particular case.
Reviewed-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
ops_execute() calculates the size of a fence array based on
XE_MAX_GT_PER_TILE, while the code that actually fills in the fence
array uses a for_each_tlb_inval() iterator. This works out okay today
since both approaches come up with the same number of invalidation
fences (2: primary GT invalidation + media GT invalidation), but could
be problematic in the future if there isn't a 1:1 relationship between
TLBs needing invalidation and potential GTs on the tile.
Adjust the allocation code to use the same for_each_tlb_inval()
counting logic as the code that fills the array to future-proof the
code.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20251118202604.3715782-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Allowing irq_work to be scheduled while trying to suspend has shown
to cause problems as some architectures interpret the pending
interrupts as a reason to not suspend. This became a problem for
printk() with the introduction of NBCON consoles. With every
printk() call, NBCON console printing kthreads are woken by queueing
irq_work. This means that irq_work continues to be queued due to
printk() calls late in the suspend procedure.
Avoid this problem by preventing printk() from queueing irq_work
once console suspending has begun. This applies to triggering NBCON
and legacy deferred printing as well as klogd waiters.
Since triggering of NBCON threaded printing relies on irq_work, the
pr_flush() within console_suspend_all() is used to perform the final
flushing before suspending consoles and blocking irq_work queueing.
NBCON consoles that are not suspended (due to the usage of the
"no_console_suspend" boot argument) transition to atomic flushing.
Introduce a new global variable @console_irqwork_blocked to flag
when irq_work queueing is to be avoided. The flag is used by
printk_get_console_flush_type() to avoid allowing deferred printing
and switch NBCON consoles to atomic flushing. It is also used by
vprintk_emit() to avoid klogd waking.
Add WARN_ON_ONCE(console_irqwork_blocked) to the irq_work queuing
functions to catch any code that attempts to queue printk irq_work
during the suspending/resuming procedure.
Cc: stable@vger.kernel.org # 6.13.x because no drivers in 6.12.x
Fixes: 6b93bb41f6 ("printk: Add non-BKL (nbcon) console basic infrastructure")
Closes: https://lore.kernel.org/lkml/DB9PR04MB8429E7DDF2D93C2695DE401D92C4A@DB9PR04MB8429.eurprd04.prod.outlook.com
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://patch.msgid.link/20251113160351.113031-3-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Currently printk_trigger_flush() only triggers legacy offloaded
flushing, even if that may not be the appropriate method to flush
for currently registered consoles. (The function predates the
NBCON consoles.)
Since commit 6690d6b527 ("printk: Add helper for flush type
logic") there is printk_get_console_flush_type(), which also
considers NBCON consoles and reports all the methods of flushing
appropriate based on the system state and consoles available.
Update printk_trigger_flush() to use
printk_get_console_flush_type() to appropriately flush registered
consoles.
Suggested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/stable/20251113160351.113031-2-john.ogness%40linutronix.de
Tested-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://patch.msgid.link/20251113160351.113031-2-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Add new definition for Amlogic SoCs, include S6, S7, S7D.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20251119-soc-info-s6-s7-s7d-v3-2-1764c1995c04@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
