Allowing byte aligned memory provides a nice testing ground for
direct-io.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than kmap the the request bio segment for each sector, do
the mapping just once.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
No need to mix errno and blk_status_t error types. Just use the standard
block layer type.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It always returns success, so the code that saves the errors status, but
proceeds without checking it looks a bit odd. Clean this up.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_advance_io_iter() and ublk_copy_io_pages() currently open-code the
iteration over the request's bvecs. Switch to the rq_for_each_segment()
macro provided by blk-mq to avoid reaching into the bio internals and
simplify the code.
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_copy_user_pages()/ublk_copy_io_pages() currently uses
iov_iter_get_pages2() to extract the pages from the iov_iter and
memcpy()s between the bvec_iter and the iov_iter's pages one at a time.
Switch to using copy_to_iter()/copy_from_iter() instead. This avoids the
user page reference count increments and decrements and needing to split
the memcpy() at user page boundaries. It also simplifies the code
considerably.
Ming reports a 40% throughput improvement when issuing I/O to the
selftests null ublk server with zero-copy disabled.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IORING_SETUP_NO_MMAP rings remain user accessible even before the ctx
setup is finalised, so use WRITE_ONCE consistently when initialising
rings.
Fixes: 03d89a2de2 ("io_uring: support for user allocated memory for rings/sqes")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a refcount to struct io_zcrx_ifq to reverse the refcounting
relationship i.e. rings now reference ifqs instead. As a result of this,
remove ctx->refs that an ifq holds on a ring via the page pool memory
provider.
This ref ifq->refs is held by internal users of an ifq, namely rings and
the page pool memory provider associated with an ifq. This is needed to
keep the ifq around until the page pool is destroyed.
Since ifqs now no longer hold refs to ring ctx, there isn't a need to
split the cleanup of ifqs into two: io_shutdown_zcrx_ifqs() in
io_ring_exit_work() while waiting for ctx->refs to drop to 0, and
io_unregister_zcrx_ifqs() after. Remove io_shutdown_zcrx_ifqs().
Signed-off-by: David Wei <dw@davidwei.uk>
Co-developed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for removing the ref on ctx->refs held by an ifq and
removing io_shutdown_zcrx_ifqs(), move io_unregister_zcrx_ifqs() down
such that it can call io_zcrx_scrub().
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for removing ifq->ctx and making ifq lifetime independent
of ring ctx, add user_struct and mm_struct to io_zcrx_ifq.
In the ifq cleanup path, these are the only fields used from the main
ring ctx to do accounting. Taking a copy in the ifq allows ifq->ctx to
be removed later, including the ctx->refs held by the ifq.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add io_zcrx_ifq arg to io_zcrx_free_area(). A QOL change to reduce line
widths.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refactor io_{un}account_mem() to take user_struct and mm_struct
directly, instead of accessing it from the ring ctx.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refactor io_free_region() to take user_struct directly, instead of
accessing it from the ring ctx.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove io_ring_ctx arg from io_region_pin_pages() and
io_region_allocate_pages() that isn't used.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that start_server_str enforces SO_REUSEADDR, there's no need to keep
using start_reusport_server in tc_tunnel, especially since it only uses
one server at a time.
Replace start_reuseport_server with start_server_str in tc_tunnel test.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-start-server-soreuseaddr-v1-2-1bbd9c1f8d65@bootlin.com
Some tests have to stop/start a server multiple time with the same
listening address. Doing so without SO_REUSADDR leads to failures due to
the socket still being in TIME_WAIT right after the first instance
stop/before the second instance start. Instead of letting each test
manually set SO_REUSEADDR on their servers, it can be done automatically
by start_server_addr for all tests (and without any major downside).
Enforce SO_REUSEADDR in start_server_addr for all tests.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-start-server-soreuseaddr-v1-1-1bbd9c1f8d65@bootlin.com
No zone plugs are allocated when a zone is opened by calling Zone Append
on it. This makes the cached zone reporting report incorrectly empty
zones if the file system is unmounted and report zones is called after
that, e.g. by xfstests test cases using the scratch device.
Fix this by recording if zone append was used on a device, and disable
cached reporting for the device until a ZONE_RESET_ALL happens that
guarantees all zones are empty.
We could probably do even better using a per-zone flag, but the practical
use cache for zone reporting after the initial mount are rather limited,
so let's keep things simple for now.
Fixes: 31f0656a4a ("block: introduce blkdev_report_zones_cached()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
disk->zones_cond is allocated for all zoned devices, but
disk_free_zone_resources skips it when the zone write plug hash is not
allocated, leaking the allocation for non-mq devices that don't emulate
zone append. This is reported by kmemleak-enabled xfstests for various
tests that use simple device mapper targets.
Fix this by moving all code that requires writes plugs from
disk_free_zone_resources into disk_destroy_zone_wplugs_hash_table
and executing the rest of the code, including the disk->zones_cond
freeing unconditionally.
Fixes: 6e945ffb65 ("block: use zone condition to determine conventional zones")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ECSPI in i.MX51 and i.MX53 support target mode. Current code only support
i.MX53. Remove is_imx53_ecspi() check for target mode to support i.MX51.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Link: https://patch.msgid.link/20251027110256.543314-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20251106-restricted-pointers-stm-v1-1-7d03eb5020ba@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
cgroup_task_dead() is called from finish_task_switch() which runs with
preemption disabled and doesn't allow scheduling even on PREEMPT_RT. The
function needs to acquire css_set_lock which is a regular spinlock that can
sleep on RT kernels, leading to "sleeping function called from invalid
context" warnings.
css_set_lock is too large in scope to convert to a raw_spinlock. However,
the unlinking operations don't need to run synchronously - they just need
to complete after the task is done running.
On PREEMPT_RT, defer the work through irq_work. While the work doesn't need
to happen immediately, it can't be delayed indefinitely either as the dead
task pins the cgroup and task_struct can be pinned indefinitely. Use the
lazy version of irq_work to allow batching and lower impact while ensuring
timely completion.
v2: Use IRQ_WORK_INIT_LAZY instead of immediate irq_work and add explanation
for why the work can't be delayed indefinitely (Sebastian Andrzej Siewior).
Fixes: d245698d72 ("cgroup: Defer task cgroup unlink until after the task is done switching out")
Reported-by: Calvin Owens <calvin@wbinvd.org>
Link: https://lore.kernel.org/r/20251104181114.489391-1-calvin@wbinvd.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Fix typo "handul" to "handful" and remove outdated limitation
stating only generic netlink is supported (we have netlink-raw).
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251105192908.686458-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for NVIDIA VRS (Voltage Regulator Specification) RTC device
driver. NVIDIA VRS is a Power Management IC (PMIC) that implements a
power sequencing solution with I2C interface. The device includes RTC
which provides functionality to get/set system time, retain system
time across boot, wake system from suspend and shutdown state.
Supported platforms:
- NVIDIA Jetson AGX Orin Developer Kit
- NVIDIA IGX Orin Development Kit
- NVIDIA Jetson Orin NX Developer Kit
- NVIDIA Jetson Orin Nano Developer Kit
Signed-off-by: Shubhi Garg <shgarg@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251007135738.487694-4-shgarg@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add device tree bindings for NVIDIA VRS (Voltage Regulator Specification)
RTC device. NVIDIA VRS is a Power Management IC (PMIC) that implements a
power sequencing solution with I2C interface. The device includes RTC
which provides functionality to get/set system time, retain system
time across boot, wake system from suspend and shutdown state.
Supported platforms:
- NVIDIA Jetson AGX Orin Developer Kit
- NVIDIA IGX Orin Development Kit
- NVIDIA Jetson Orin NX Developer Kit
- NVIDIA Jetson Orin Nano Developer Kit
Signed-off-by: Shubhi Garg <shgarg@nvidia.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251007135738.487694-2-shgarg@nvidia.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Wait until a PHY becomes ready in the probe callback by
using read_poll_timeout function.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20251105133126.3221948-1-fujita.tomonori@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__unregister_trace_fprobe() checks tf->tuser to put it when removing
tprobe. However, disable_trace_fprobe() does not use it and only calls
unregister_fprobe(). Thus it forgets to disable tracepoint_user.
If the trace_fprobe has tuser, put it for unregistering the tracepoint
callbacks when disabling tprobe correctly.
Link: https://lore.kernel.org/all/176244794466.155515.3971904050506100243.stgit@devnote2/
Fixes: 2867495dea ("tracing: tprobe-events: Register tracepoint when enable tprobe event")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Beau Belgrave <beaub@linux.microsoft.com>
Reviewed-by: Beau Belgrave <beaub@linux.microsoft.com>
Since __tracepoint_user_init() calls tracepoint_user_register() without
initializing tuser->tpoint with given tracpoint, it does not register
tracepoint stub function as callback correctly, and tprobe does not work.
Initializing tuser->tpoint correctly before tracepoint_user_register()
so that it sets up tracepoint callback.
I confirmed below example works fine again.
echo "t sched_switch preempt prev_pid=prev->pid next_pid=next->pid" > /sys/kernel/tracing/dynamic_events
echo 1 > /sys/kernel/tracing/events/tracepoints/sched_switch/enable
cat /sys/kernel/tracing/trace_pipe
Link: https://lore.kernel.org/all/176244793514.155515.6466348656998627773.stgit@devnote2/
Fixes: 2867495dea ("tracing: tprobe-events: Register tracepoint when enable tprobe event")
Reported-by: Beau Belgrave <beaub@linux.microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Beau Belgrave <beaub@linux.microsoft.com>
Reviewed-by: Beau Belgrave <beaub@linux.microsoft.com>
The Radxa ROCK 5B+/5T USB Type-C port supports Dual Role Data and
should also act as a host. However, currently, when acting as a host,
only self-powered devices work.
Since the ROCK 5B+ supports Dual Role Power, set the power-role
property to "dual" and the try-power-role property to "sink". (along
with related properties)
The ROCK 5T should only support the "source" power-role.
This allows the port to act as a host, supply power to the port, and
allow bus-powered devices to work.
Note that on the ROCK 5T, with this patch applied, it has been
observed that some bus-powered devices do not work correctly. Also,
it has been observed that after connecting a device (and the data-role
switches to host), connecting a host device does not switch the
data-role back to the device role. These issues should be addressed
separately.
Note that there is a separate known issue where USB 3.0 SuperSpeed
devices do not work when oriented in reverse. This issue should also be
addressed separately. (USB 2.0/1.1 devices work in both orientations)
Fixes: 67b2c15d8f ("arm64: dts: rockchip: add USB-C support for ROCK 5B/5B+/5T")
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://patch.msgid.link/20251104085227.820-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Some Apple EFI firmwares do not provide the SMBIOS Protocol,
causing efi_get_smbios_record() to fail. This prevents retrieval of
system information such as product name, which is needed by
apple_set_os() to enable the integrated GPU on dual-graphics Intel
MacBooks.
Add a fallback that directly parses the SMBIOS entry point table when
the protocol is unavailable.
Signed-off-by: Francesco Pompo <francescopompo2@gmail.com>
[ardb: cosmetic tweaks]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When the device was first added, there was a problem with the bluetooth
controller that manifested when DMA was enabled for the underlying UART
interface. At some point in the intervening time the problem appears to
have been resolved. Add the UART rx and tx channels back to re-enable
UART.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://patch.msgid.link/20251105205708.732125-6-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
Given that tg3_get_rxnfc() only handles ETHTOOL_GRXRINGS, then this
function becomes useless now, and it is removed.
This also fixes the behavior for devices without MSIX support.
Previously, the function would return -EOPNOTSUPP, but now it correctly
returns 1.
The functionality remains the same: return the current queue count
if the device is running, otherwise return the minimum of online
CPUs and TG3_RSS_MAX_NUM_QS.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20251105-grxrings_v1-v1-1-54c2caafa1fd@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 64cf7d058a ("tracing: Have trace_marker use per-cpu data to read
user space") made an update that fixed both trace_marker and
trace_marker_raw. But the small difference made to trace_marker_raw had a
blatant bug in it that any basic testing would have uncovered.
Unfortunately, the self tests have tests for trace_marker but nothing for
trace_marker_raw which allowed the bug to get upstream.
Add basic selftests to test trace_marker_raw so that this doesn't happen
again.
Link: https://lore.kernel.org/r/20251014145149.3e3c1033@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Extend the iavf driver to support Receive Side Scaling (RSS)
configuration for GTP (GPRS Tunneling Protocol) flows using ethtool.
The implementation introduces new RSS flow segment headers and hash field
definitions for various GTP encapsulations, including:
- GTPC
- GTPU (IP, Extension Header, Uplink, Downlink)
- TEID-based hashing
The ethtool interface is updated to parse and apply these new flow types
and hash fields, enabling fine-grained traffic distribution for GTP-based
mobile workloads.
This enhancement improves performance and scalability for virtualized
network functions (VNFs) and user plane functions (UPFs) in 5G and LTE
deployments.
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Consolidate updates to the Protocol Type (PTYPE) bitmap definitions
across multiple flow types in the Intel ICE driver to support GTP
(GPRS Tunneling Protocol) encapsulated traffic.
Enable improved Receive Side Scaling (RSS) configuration for both user
and control plane GTP flows.
Cover a wide range of protocol and encapsulation scenarios, including:
- MAC OFOS and IL
- IPv4 and IPv6 (OFOS, IL, ALL, no-L4)
- TCP, SCTP, ICMP
- GRE OF
- GTPC (control plane)
Expand the PTYPE bitmap entries to improve classification and
distribution of GTP traffic across multiple queues, enhancing
performance and scalability in mobile network environments.
Co-developed-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Co-developed-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Co-developed-by: Jie Wang <jie1x.wang@intel.com>
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Co-developed-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Enhance TCAM priority logic to avoid conflicts between RSS profiles
with overlapping PTGs and attributes.
Track used PTG and attribute combinations.
Ensure higher-priority profiles override lower ones.
Add helper for setting TCAM flags and masks.
Ensure RSS rule consistency and prevent unintended matches.
Co-developed-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This commit implements the core RSS context management and configuration
logic for GTP (GTPU) protocol support in VF RSS operations.
Key implementation features:
- GTPU hash context management with pre/post processing functions
- Context index calculation and mapping for different GTPU scenarios
- Integration with main RSS configuration flow via wrapper functions
- Support for IPv4/IPv6 GTPU RSS configurations
- Rollback mechanism for handling RSS rule conflicts
- Hash context reset and cleanup functionality
The implementation provides comprehensive GTPU RSS support by:
1. Adding ice_add_rss_cfg_pre_gtpu() for preprocessing GTPU contexts
2. Adding ice_add_rss_cfg_post_gtpu() for postprocessing configurations
3. Adding ice_calc_gtpu_ctx_idx() for context index calculation
4. Integrating GTPU logic into ice_add_rss_cfg_wrap() and
ice_rem_rss_cfg_wrap()
5. Supporting context tracking in VF hash_ctx structures
This completes the GTP RSS infrastructure enabling VFs to configure
RSS hashing on GTP-encapsulated traffic.
Co-developed-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Co-developed-by: Jie Wang <jie1x.wang@intel.com>
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Co-developed-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Co-developed-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Co-developed-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add virtchnl protocol header and field definitions for advanced RSS
configuration including GTPC, GTPU, L2TPv2, ECPRI, PPP, GRE, and IP
fragment headers.
- Define new virtchnl protocol header types
- Add RSS field selectors for tunnel protocols
- Extend static mapping arrays for protocol field matching
- Add L2TPv2 session ID and length+session ID field support
This provides the foundational definitions needed for VF RSS
configuration of tunnel protocols.
Co-developed-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Co-developed-by: Jie Wang <jie1x.wang@intel.com>
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Co-developed-by: Junfeng Guo <junfeng.guo@intel.com>
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Co-developed-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Co-developed-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>