Commit graph

1,461,726 commits

Author SHA1 Message Date
Punit Agrawal
7991fda619 arm64: acpi: Drop message logging SPCR default console
Commit f5a4af3c75 ("ACPI: Add acpi=nospcr to disable ACPI SPCR as
default console on ARM64") introduced a command line parameter to
prevent using SPCR provided console as default. It also introduced a
message to log this choice.

Drop the message as it is not particularly useful and can be incorrect
in situations where no SPCR is provided by the firmware.

Link: https://lore.kernel.org/all/aQN0YWUYaPYWpgJM@willie-the-truck/
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2025-11-07 14:23:33 +00:00
Punit Agrawal
eeb8c19896 Revert "ACPI: Suppress misleading SPCR console message when SPCR table is absent"
This reverts commit bad3fa2fb9.

Commit bad3fa2fb9 ("ACPI: Suppress misleading SPCR console message
when SPCR table is absent") mistakenly assumes acpi_parse_spcr()
returning 0 to indicate a failure to parse SPCR. While addressing the
resultant incorrect logging it was deemed that dropping the message is
a better approach as it is not particularly useful.

Roll back the commit introducing the bug as a step towards dropping
the log message.

Link: https://lore.kernel.org/all/aQN0YWUYaPYWpgJM@willie-the-truck/
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2025-11-07 14:23:33 +00:00
Catalin Marinas
535fdfc5a2 arm64: Use load LSE atomics for the non-return per-CPU atomic operations
The non-return per-CPU this_cpu_*() atomic operations are implemented as
STADD/STCLR/STSET when FEAT_LSE is available. On many microarchitecture
implementations, these instructions tend to be executed "far" in the
interconnect or memory subsystem (unless the data is already in the L1
cache). This is in general more efficient when there is contention as it
avoids bouncing cache lines between CPUs. The load atomics (e.g. LDADD
without XZR as destination), OTOH, tend to be executed "near" with the
data loaded into the L1 cache.

STADD executed back to back as in srcu_read_{lock,unlock}*() incur an
additional overhead due to the default posting behaviour on several CPU
implementations. Since the per-CPU atomics are unlikely to be used
concurrently on the same memory location, encourage the hardware to to
execute them "near" by issuing load atomics - LDADD/LDCLR/LDSET - with
the destination register unused (but not XZR).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/e7d539ed-ced0-4b96-8ecd-048a5b803b85@paulmck-laptop
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Palmer Dabbelt <palmer@dabbelt.com>
[will: Add comment and link to the discussion thread]
Signed-off-by: Will Deacon <will@kernel.org>
2025-11-07 14:20:07 +00:00
Daniel del Castillo
453a73000c Documentation: nova: Update the todo list
This small patch updates the nova todo list to
remove some tasks that have been solved lately:
* COHA is solved in this patch series
* TRSM was solved recently [1]

[1] https://lore.kernel.org/rust-for-linux/DCEJ9SV4LBJL.11EUZVXX6EB9H@nvidia.com/

Signed-off-by: Daniel del Castillo <delcastillodelarosadaniel@gmail.com>
[acourbot@nvidia.com: set prefix to "Documentation: nova:".]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251104193756.57726-4-delcastillodelarosadaniel@gmail.com>
2025-11-07 23:10:44 +09:00
Daniel del Castillo
3577e265e4 gpu: nova-core: Simplify DmaObject::from_data in nova-core/dma.rs
This patch solves one of the existing mentions of COHA, a task
in the Nova task list about improving the `CoherentAllocation` API.
It uses the `write` method from `CoherentAllocation`.

Signed-off-by: Daniel del Castillo <delcastillodelarosadaniel@gmail.com>
[acourbot@nvidia.com: set prefix to "gpu: nova-core:".]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251104193756.57726-3-delcastillodelarosadaniel@gmail.com>
2025-11-07 23:10:44 +09:00
Daniel del Castillo
571ce401a7 gpu: nova-core: Fix capitalization of some comments
Some comments that already existed didn't start with a capital
letter, this patch fixes that.

Signed-off-by: Daniel del Castillo <delcastillodelarosadaniel@gmail.com>
[acourbot@nvidia.com: set prefix to "gpu: nova-core:".]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251104193756.57726-2-delcastillodelarosadaniel@gmail.com>
2025-11-07 23:10:44 +09:00
Daniel del Castillo
473f778592 gpu: nova-core: Simplify transmute and transmute_mut in fwsec.rs
This patch solves one of the existing mentions of COHA, a task
in the Nova task list about improving the `CoherentAllocation` API.
It uses the new `from_bytes` method from the `FromBytes` trait as
well as the `as_slice` and `as_slice_mut` methods from
`CoherentAllocation`.

Signed-off-by: Daniel del Castillo <delcastillodelarosadaniel@gmail.com>
[acourbot@nvidia.com: set prefix to "gpu: nova-core:".]
[acourbot@nvidia.com: fix merge conflict after imports refactor.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251104193756.57726-1-delcastillodelarosadaniel@gmail.com>
2025-11-07 23:10:44 +09:00
John Hubbard
173c99b85a gpu: nova-core: apply the one "use" item per line policy
As per [1], we need one "use" item per line, in order to reduce merge
conflicts. Furthermore, we need a trailing ", //" in order to tell
rustfmt(1) to leave it alone.

This does that for the entire nova-core driver.

[1] https://docs.kernel.org/rust/coding-guidelines.html#imports

Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
[acourbot@nvidia.com: remove imports already in prelude as pointed out
by Danilo.]
[acourbot@nvidia.com: remove a few unneeded trailing `//`.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251107021006.434109-1-jhubbard@nvidia.com>
2025-11-07 23:10:44 +09:00
Peter Zijlstra
2093d8cf80 perf/x86/intel: Optimize PEBS extended config
Similar to enable_acr_event, avoid the branch.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2025-11-07 15:08:23 +01:00
Peter Zijlstra
02da693f66 perf/x86/intel: Check PEBS dyn_constraints
Handle the interaction between ("perf/x86/intel: Update dyn_constraint
base on PEBS event precise level") and ("perf/x86/intel: Add a check
for dynamic constraints").

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2025-11-07 15:08:23 +01:00
Kan Liang
bd24f9beed perf/x86/intel: Add a check for dynamic constraints
The current event scheduler has a limit. If the counter constraint of an
event is not a subset of any other counter constraint with an equal or
higher weight. The counters may not be fully utilized.

To workaround it, the commit bc1738f6ee ("perf, x86: Fix event
scheduler for constraints with overlapping counters") introduced an
overlap flag, which is hardcoded to the event constraint that may
trigger the limit. It only works for static constraints.

Many features on and after Intel PMON v6 require dynamic constraints. An
event constraint is decided by both static and dynamic constraints at
runtime. See commit 4dfe3232cc ("perf/x86: Add dynamic constraint").
The dynamic constraints are from CPUID enumeration. It's impossible to
hardcode it in advance. It's not practical to set the overlap flag to all
events. It's harmful to the scheduler.

For the existing Intel platforms, the dynamic constraints don't trigger
the limit. A real fix is not required.

However, for virtualization, VMM may give a weird CPUID enumeration to a
guest. It's impossible to indicate what the weird enumeration is. A
check is introduced, which can list the possible breaks if a weird
enumeration is used.

Check the dynamic constraints enumerated for normal, branch counters
logging, and auto-counter reload.
Check both PEBS and non-PEBS constratins.

Closes: https://lore.kernel.org/lkml/20250416195610.GC38216@noisy.programming.kicks-ass.net/
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20250512175542.2000708-1-kan.liang@linux.intel.com
2025-11-07 15:08:23 +01:00
Dapeng Mi
bb5f13df3c perf/x86/intel: Add counter group support for arch-PEBS
Base on previous adaptive PEBS counter snapshot support, add counter
group support for architectural PEBS. Since arch-PEBS shares same
counter group layout with adaptive PEBS, directly reuse
__setup_pebs_counter_group() helper to process arch-PEBS counter group.

Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-13-dapeng1.mi@linux.intel.com
2025-11-07 15:08:22 +01:00
Dapeng Mi
52448a0a73 perf/x86/intel: Setup PEBS data configuration and enable legacy groups
Different with legacy PEBS, arch-PEBS provides per-counter PEBS data
configuration by programing MSR IA32_PMC_GPx/FXx_CFG_C MSRs.

This patch obtains PEBS data configuration from event attribute and then
writes the PEBS data configuration to MSR IA32_PMC_GPx/FXx_CFG_C and
enable corresponding PEBS groups.

Please notice this patch only enables XMM SIMD regs sampling for
arch-PEBS, the other SIMD regs (OPMASK/YMM/ZMM) sampling on arch-PEBS
would be supported after PMI based SIMD regs (OPMASK/YMM/ZMM) sampling
is supported.

Co-developed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-12-dapeng1.mi@linux.intel.com
2025-11-07 15:08:22 +01:00
Dapeng Mi
e89c5d1f29 perf/x86/intel: Update dyn_constraint base on PEBS event precise level
arch-PEBS provides CPUIDs to enumerate which counters support PEBS
sampling and precise distribution PEBS sampling. Thus PEBS constraints
should be dynamically configured base on these counter and precise
distribution bitmap instead of defining them statically.

Update event dyn_constraint base on PEBS event precise level.

Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-11-dapeng1.mi@linux.intel.com
2025-11-07 15:08:22 +01:00
Dapeng Mi
2721e8da2d perf/x86/intel: Allocate arch-PEBS buffer and initialize PEBS_BASE MSR
Arch-PEBS introduces a new MSR IA32_PEBS_BASE to store the arch-PEBS
buffer physical address. This patch allocates arch-PEBS buffer and then
initialize IA32_PEBS_BASE MSR with the buffer physical address.

Co-developed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-10-dapeng1.mi@linux.intel.com
2025-11-07 15:08:22 +01:00
Dapeng Mi
d21954c8a0 perf/x86/intel: Process arch-PEBS records or record fragments
A significant difference with adaptive PEBS is that arch-PEBS record
supports fragments which means an arch-PEBS record could be split into
several independent fragments which have its own arch-PEBS header in
each fragment.

This patch defines architectural PEBS record layout structures and add
helpers to process arch-PEBS records or fragments. Only legacy PEBS
groups like basic, GPR, XMM and LBR groups are supported in this patch,
the new added YMM/ZMM/OPMASK vector registers capturing would be
supported in the future.

Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-9-dapeng1.mi@linux.intel.com
2025-11-07 15:08:21 +01:00
Dapeng Mi
167cde7dc9 perf/x86/intel/ds: Factor out PEBS group processing code to functions
Adaptive PEBS and arch-PEBS share lots of same code to process these
PEBS groups, like basic, GPR and meminfo groups. Extract these shared
code to generic functions to avoid duplicated code.

Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-8-dapeng1.mi@linux.intel.com
2025-11-07 15:08:21 +01:00
Dapeng Mi
8807d92270 perf/x86/intel/ds: Factor out PEBS record processing code to functions
Beside some PEBS record layout difference, arch-PEBS can share most of
PEBS record processing code with adaptive PEBS. Thus, factor out these
common processing code to independent inline functions, so they can be
reused by subsequent arch-PEBS handler.

Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-7-dapeng1.mi@linux.intel.com
2025-11-07 15:08:21 +01:00
Dapeng Mi
d243d0bb64 perf/x86/intel: Initialize architectural PEBS
arch-PEBS leverages CPUID.23H.4/5 sub-leaves enumerate arch-PEBS
supported capabilities and counters bitmap. This patch parses these 2
sub-leaves and initializes arch-PEBS capabilities and corresponding
structures.

Since IA32_PEBS_ENABLE and MSR_PEBS_DATA_CFG MSRs are no longer existed
for arch-PEBS, arch-PEBS doesn't need to manipulate these MSRs. Thus add
a simple pair of __intel_pmu_pebs_enable/disable() callbacks for
arch-PEBS.

Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-6-dapeng1.mi@linux.intel.com
2025-11-07 15:08:20 +01:00
Dapeng Mi
5e4e355ae7 perf/x86/intel: Correct large PEBS flag check
current large PEBS flag check only checks if sample_regs_user contains
unsupported GPRs but doesn't check if sample_regs_intr contains
unsupported GPRs.

Of course, currently PEBS HW supports to sample all perf supported GPRs,
the missed check doesn't cause real issue. But it won't be true any more
after the subsequent patches support to sample SSP register. SSP
sampling is not supported by adaptive PEBS HW and it would be supported
until arch-PEBS HW. So correct this issue.

Fixes: a47ba4d77e ("perf/x86: Enable free running PEBS for REGS_USER/INTR")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-5-dapeng1.mi@linux.intel.com
2025-11-07 15:08:20 +01:00
Dapeng Mi
ee98b8bfc7 perf/x86/intel: Replace x86_pmu.drain_pebs calling with static call
Use x86_pmu_drain_pebs static call to replace calling x86_pmu.drain_pebs
function pointer.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-4-dapeng1.mi@linux.intel.com
2025-11-07 15:08:20 +01:00
Dapeng Mi
7e772a93eb perf/x86: Fix NULL event access and potential PEBS record loss
When intel_pmu_drain_pebs_icl() is called to drain PEBS records, the
perf_event_overflow() could be called to process the last PEBS record.

While perf_event_overflow() could trigger the interrupt throttle and
stop all events of the group, like what the below call-chain shows.

perf_event_overflow()
  -> __perf_event_overflow()
    ->__perf_event_account_interrupt()
      -> perf_event_throttle_group()
        -> perf_event_throttle()
          -> event->pmu->stop()
            -> x86_pmu_stop()

The side effect of stopping the events is that all corresponding event
pointers in cpuc->events[] array are cleared to NULL.

Assume there are two PEBS events (event a and event b) in a group. When
intel_pmu_drain_pebs_icl() calls perf_event_overflow() to process the
last PEBS record of PEBS event a, interrupt throttle is triggered and
all pointers of event a and event b are cleared to NULL. Then
intel_pmu_drain_pebs_icl() tries to process the last PEBS record of
event b and encounters NULL pointer access.

To avoid this issue, move cpuc->events[] clearing from x86_pmu_stop()
to x86_pmu_del(). It's safe since cpuc->active_mask or
cpuc->pebs_enabled is always checked before access the event pointer
from cpuc->events[].

Closes: https://lore.kernel.org/oe-lkp/202507042103.a15d2923-lkp@intel.com
Fixes: 9734e25fbf ("perf: Fix the throttle logic for a group")
Reported-by: kernel test robot <oliver.sang@intel.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-3-dapeng1.mi@linux.intel.com
2025-11-07 15:08:19 +01:00
Dapeng Mi
c7f69dc073 perf/x86: Remove redundant is_x86_event() prototype
2 is_x86_event() prototypes are defined in perf_event.h. Remove the
redundant one.

Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251029102136.61364-2-dapeng1.mi@linux.intel.com
2025-11-07 15:08:19 +01:00
Charles Keepax
6985defd1d
regmap: sdw-mbq: Reorder regmap_mbq_context struct for better packing
Avoid a hole in struct regmap_mbq_context by shuffling the members
slightly. Pahole before:

struct regmap_mbq_context {
        struct device *            dev;                  /*     0     8 */
        struct sdw_slave *         sdw;                  /*     8     8 */
        struct regmap_sdw_mbq_cfg  cfg;                  /*    16    32 */
        int                        val_size;             /*    48     4 */

        /* XXX 4 bytes hole, try to pack */

        bool                       (*readable_reg)(struct device *, unsigned int); /*    56     8 */

        /* size: 64, cachelines: 1, members: 5 */
        /* sum members: 60, holes: 1, sum holes: 4 */
};

Pahole after:

struct regmap_mbq_context {
        struct device *            dev;                  /*     0     8 */
        struct sdw_slave *         sdw;                  /*     8     8 */
        bool                       (*readable_reg)(struct device *, unsigned int); /*    16     8 */
        struct regmap_sdw_mbq_cfg  cfg;                  /*    24    32 */
        int                        val_size;             /*    56     4 */

        /* size: 64, cachelines: 1, members: 5 */
        /* padding: 4 */
};

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251107104551.1553526-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-11-07 14:07:04 +00:00
Yicong Yang
7ab06ea41a arch_topology: Provide a stub topology_core_has_smt() for !CONFIG_GENERIC_ARCH_TOPOLOGY
The arm_pmu driver is using topology_core_has_smt() for retrieving
the SMT implementation which depends on CONFIG_GENERIC_ARCH_TOPOLOGY.
The config is optional on arm platforms so provide a
!CONFIG_GENERIC_ARCH_TOPOLOGY stub for topology_core_has_smt().

Fixes: c3d78c34ad ("perf: arm_pmuv3: Don't use PMCCNTR_EL0 on SMT cores")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511041757.vuCGOmFc-lkp@intel.com/
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Yicong Yang <yangyccccc@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
2025-11-07 13:45:02 +00:00
Robin Murphy
2d7a824807 perf/arm-ni: Fix and optimise register offset calculation
LKP points out an operator precedence oversight in the new NoC S3
support that, annoyingly, my local W=1 build didn't flag. In fixing
that, we can also take the similarly-missed opportunity to cache the
version check itself at event_init time.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511041749.ok8zDP6u-lkp@intel.com/
Fixes: 8fa08f8835 ("perf/arm-ni: Add NoC S3 support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2025-11-07 13:42:46 +00:00
Paul E. McKenney
204ab51445 refscale: Do not disable interrupts for tests involving local_bh_enable()
Some kernel configurations prohibit invoking local_bh_enable() while
interrupts are disabled.  However, refscale disables interrupts to reduce
OS noise during the tests, which results in splats.  This commit therefore
adds an ->enable_irqs flag to the ref_scale_ops structure, and refrains
from disabling interrupts when that flag is set.  This flag is set for
the "bh" and "incpercpubh" scale_type module-parameter values.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2025-11-07 14:37:17 +01:00
Paul E. McKenney
448b66a7aa refscale: Add non-atomic per-CPU increment readers
This commit adds refscale readers based on READ_ONCE() and WRITE_ONCE()
that are unprotected (can lose counts, "refscale.scale_type=incpercpu"),
preempt-disabled ("refscale.scale_type=incpercpupreempt"),
bh-disabled ("refscale.scale_type=incpercpubh"), and irq-disabled
("refscale.scale_type=incpercpuirqsave").  On my x86 laptop, these are
about 4.3ns, 3.8ns, and 7.3ns per pair, respectively.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2025-11-07 14:37:17 +01:00
Paul E. McKenney
bdba8330ad refscale: Add this_cpu_inc() readers
This commit adds refscale readers based on this_cpu_inc() and
this_cpu_inc() ("refscale.scale_type=percpuinc").  On my x86 laptop,
these are about 4.5ns per pair.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2025-11-07 14:37:17 +01:00
Paul E. McKenney
057df3eaca refscale: Add preempt_disable() readers
This commit adds refscale readers based on preempt_disable() and
preempt_enable() ("refscale.scale_type=preempt").  On my x86 laptop, these
are about 2.8ns.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2025-11-07 14:37:17 +01:00
Paul E. McKenney
78a731cefc refscale: Add local_bh_disable() readers
This commit adds refscale readers based on local_bh_disable() and
local_bh_enable() ("refscale.scale_type=bh").  On my x86 laptop, these
are about 4.9ns.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2025-11-07 14:37:17 +01:00
Paul E. McKenney
edd6f78b75 refscale: Add local_irq_disable() and local_irq_save() readers
This commit adds refscale readers based on local_irq_disable() and
local_irq_enable() ("refscale.scale_type=irq") and on local_irq_save()
and local_irq_restore ("refscale.scale_type=irqsave").  On my x86 laptop,
these are about 2.8ns and 7.5ns per enable/disable pair, respectively.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2025-11-07 14:37:17 +01:00
Jani Nikula
2750f6765d drm/i915/psr: fix pipe to vblank conversion
First, we can't assume pipe == crtc index. If a pipe is fused off in
between, it no longer holds. intel_crtc_for_pipe() is the only proper
way to get from a pipe to the corresponding crtc.

Second, drivers aren't supposed to access or index drm->vblank[]
directly. There's drm_crtc_vblank_crtc() for this.

Use both functions to fix the pipe to vblank conversion.

Fixes: f02658c46c ("drm/i915/psr: Add mechanism to notify PSR of pipe enable/disable")
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: stable@vger.kernel.org # v6.16+
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/20251106200000.1455164-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2025-11-07 15:33:28 +02:00
Jie Gan
aa5edd1b5e coresight: tpdm: remove redundant check for drvdata
Remove the redundant check for drvdata data because the drvdata here
already has been guarranted to be non-NULL.

Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20251107-fix_tpdm_redundant_check-v1-1-b63468a2dd73@oss.qualcomm.com
2025-11-07 13:31:17 +00:00
John Ogness
187de7c212 printk: nbcon: Allow unsafe write_atomic() for panic
There may be console drivers that have not yet figured out a way
to implement safe atomic printing (->write_atomic() callback).
These drivers could choose to only implement threaded printing
(->write_thread() callback), but then it is guaranteed that _no_
output will be printed during panic. Not even attempted.

As a result, developers may be tempted to implement unsafe
->write_atomic() callbacks and/or implement some sort of custom
deferred printing trickery to try to make it work. This goes
against the principle intention of the nbcon API as well as
endangers other nbcon drivers that are doing things correctly
(safely).

As a compromise, allow nbcon drivers to implement unsafe
->write_atomic() callbacks by providing a new console flag
CON_NBCON_ATOMIC_UNSAFE. When specified, the ->write_atomic()
callback for that console will _only_ be called during the
final "hope and pray" flush attempt at the end of a panic:
nbcon_atomic_flush_unsafe().

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/lkml/b2qps3uywhmjaym4mht2wpxul4yqtuuayeoq4iv4k3zf5wdgh3@tocu6c7mj4lt
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/all/swdpckuwwlv3uiessmtnf2jwlx3jusw6u7fpk5iggqo4t2vdws@7rpjso4gr7qp/ [1]
Link: https://lore.kernel.org/all/20251103-fix_netpoll_aa-v4-1-4cfecdf6da7c@debian.org/ [2]
Link: https://patch.msgid.link/20251027161212.334219-2-john.ogness@linutronix.de
[pmladek@suse.com: Fix build with rework/nbcon-in-kdb branch.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
2025-11-07 14:30:52 +01:00
Zhang Chujun
53afec2c8f tracing/tools: Fix incorrcet short option in usage text for --threads
The help message incorrectly listed '-t' as the short option for
--threads, but the actual getopt_long configuration uses '-e'.
This mismatch can confuse users and lead to incorrect command-line
usage. This patch updates the usage string to correctly show:
	"-e, --threads NRTHR"
to match the implementation.

Note: checkpatch.pl reports a false-positive spelling warning on
'Run', which is intentional.

Link: https://patch.msgid.link/20251106031040.1869-1-zhangchujun@cmss.chinamobile.com
Signed-off-by: Zhang Chujun <zhangchujun@cmss.chinamobile.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2025-11-07 07:59:37 -05:00
Paul E. McKenney
f2b7d6252c torture: Permit negative kvm.sh --kconfig numberic arguments
This commit loosens the kvm.sh script's regular expressions to permit
negative-valued Kconfig options, for example:

	--kconfig CONFIG_CMDLINE_LOG_WRAP_IDEAL_LEN=-1

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2025-11-07 13:57:38 +01:00
Paul E. McKenney
37827223f8 srcu: Add SRCU_READ_FLAVOR_FAST_UPDOWN CPP macro
This commit adds the SRCU_READ_FLAVOR_FAST_UPDOWN=0x8 macro
and adjusts rcutorture to make use of it.  In this commit, both
SRCU_READ_FLAVOR_FAST=0x4 and the new SRCU_READ_FLAVOR_FAST_UPDOWN
test SRCU-fast.  When the SRCU-fast-updown is added, the new
SRCU_READ_FLAVOR_FAST_UPDOWN macro will test it when passed to the
rcutorture.reader_flavor module parameter.

The old SRCU_READ_FLAVOR_FAST macro's value changed from 0x8 to 0x4.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: <bpf@vger.kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2025-11-07 13:57:38 +01:00
Paul E. McKenney
3ed04e3f03 rcu: Mark diagnostic functions as notrace
The rcu_lockdep_current_cpu_online(), rcu_read_lock_sched_held(),
rcu_read_lock_held(), rcu_read_lock_bh_held(), rcu_read_lock_any_held()
are used by tracing-related code paths, so putting traces on them is
unlikely to make anyone happy.  This commit therefore marks them all
"notrace".

Reported-by: Leon Hwang <leon.hwang@linux.dev>
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2025-11-07 13:57:37 +01:00
Marco Crivellari
24e3848a2e RAS/CEC: Replace use of system_wq with system_percpu_wq
Switch to using system_percpu_wq because system_wq is going away as part of
a workqueue restructuring.

Currently if a user enqueues a work item using schedule_delayed_work() the
used workqueue is "system_wq" (per-cpu workqueue) while queue_delayed_work()
uses WORK_CPU_UNBOUND (used when a CPU is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use of
WORK_CPU_UNBOUND again.

This lack of consistency cannot be addressed without refactoring the API.
For more details see those commits and the Link tag below.

  128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
  930c2ea566 ("workqueue: Add new WQ_PERCPU flag")

  [ bp: Massage commit message. ]

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de
2025-11-07 13:48:28 +01:00
Matthew Brost
0995c2fc39 drm/xe: Enforce correct user fence signaling order using
Prevent application hangs caused by out-of-order fence signaling when
user fences are attached. Use drm_syncobj (via dma-fence-chain) to
guarantee that each user fence signals in order, regardless of the
signaling order of the attached fences. Ensure user fence writebacks to
user space occur in the correct sequence.

v7:
 - Skip drm_syncbj create of error (CI)

Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251031234050.3043507-2-matthew.brost@intel.com
(cherry picked from commit adda4e855a)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-11-07 03:55:19 -08:00
Christoph Hellwig
86a9ce21f5 block: don't return 1 for the fallback case in blkdev_get_zone_info
blkdev_do_report_zones returns the number of reported zones, but
blkdev_get_zone_info returns 0 or an errno.  Translate to the expected
return value in blkdev_report_zone_fallback.

Fixes: b037d41762fd ("block: introduce blkdev_get_zone_info()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2025-11-07 04:38:28 -07:00
Mario Limonciello (AMD)
d23550efc6 x86/microcode/AMD: Add more known models to entry sign checking
Two Zen5 systems are missing from need_sha_check(). Add them.

Fixes: 50cef76d5c ("x86/microcode/AMD: Load only SHA256-checksummed patches")
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/20251106182904.4143757-1-superm1@kernel.org
2025-11-07 12:12:21 +01:00
Jouni Högander
b11a020d91 drm/xe: Do clean shutdown also when using flr
Currently Xe driver is triggering flr without any clean-up on
shutdown. This is causing random warnings from pending related works as the
underlying hardware is reset in the middle of their execution.

Fix this by performing clean shutdown also when using flr.

Fixes: 501d799a47 ("drm/xe: Wire up device shutdown handler")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20251031122312.1836534-1-jouni.hogander@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
(cherry picked from commit a4ff26b7c8)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-11-07 03:05:32 -08:00
Tejas Upadhyay
9cd27eec87 drm/xe: Move declarations under conditional branch
The xe_device_shutdown() function was needing a few declarations
that were only required under a specific condition. This change
moves those declarations to be within that conditional branch
to avoid unnecessary declarations.

Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251007100208.1407021-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit 15b3036045)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-11-07 03:05:20 -08:00
Balasubramani Vivekanandan
95af8f4fdc drm/xe/guc: Synchronize Dead CT worker with unbind
Cancel and wait for any Dead CT worker to complete before continuing
with device unbinding. Else the worker will end up using resources freed
by the undind operation.

Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Fixes: d2c5a5a926 ("drm/xe/guc: Dead CT helper")
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20251103123144.3231829-6-balasubramani.vivekanandan@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 4926713391)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
2025-11-07 03:01:54 -08:00
Jason Gunthorpe
5cb637d942 iommupt: Documentation fixes
Some adjustments pointed out by Randy:

 "decodes an full 64-bit" -> "decodes the full 64 bit"

 Correct the function parameter name for iova_to_phys()

 Use the recommended section heading style.

Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: ab0b572847 ("genpt: Add Documentation/ files")
Fixes: 879ced2bab ("iommupt: Add the AMD IOMMU v1 page table format")
Fixes: 9d4c274cd7 ("iommupt: Add iova_to_phys op")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2025-11-07 11:12:03 +01:00
Bagas Sanjaya
e4dfaf25df iommupt: Describe @bitnr parameter
Sphinx reports kernel-doc warnings when making htmldocs:

WARNING: ./drivers/iommu/generic_pt/pt_common.h:361 function parameter 'bitnr' not described in 'pt_test_sw_bit_acquire'
WARNING: ./drivers/iommu/generic_pt/pt_common.h:371 function parameter 'bitnr' not described in 'pt_set_sw_bit_release'

Describe @bitnr to squash them.

Fixes: bcc64b57b4 ("iommupt: Add basic support for SW bits in the page table")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2025-11-07 11:07:04 +01:00
Bagas Sanjaya
6573d552e2 Documentation: genpt: Don't use code block marker before iommu_amdv1.c include listing
Stephen Rothwell reports htmldocs warning when merging iommu tree:

Documentation/driver-api/generic_pt.rst:32: WARNING: Literal block expected; none found. [docutils]

This is because of duplicate double colon code block markers: one after
generic_pt/fmt/iommu_amdv1.c and the one in its preceding paragraph. The
resulting htmldocs, however, only marks the include listing (after the
former) up as it should be.

Drop the latter to fix the warning.

Fixes: ab0b572847 ("genpt: Add Documentation/ files")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251106143925.578e411b@canb.auug.org.au/
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2025-11-07 11:07:04 +01:00
Marco Crivellari
9393a3a420 thunderbolt: Replace use of system_wq with system_percpu_wq
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.

This lack of consistency cannot be addressed without refactoring the API.

This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:

commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")

Replace system_wq with system_percpu_wq, keeping the old behavior.
The old wq (system_wq) will be kept for a few release cycles.

Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2025-11-07 10:41:51 +01:00