The KSZ9031RNX reference manual [1] DS00002117K page 62 FIGURE 7-5:
POWER-UP/POWER-DOWN/RESET TIMING Note 2 states, that after the
de-assertion of reset, wait a minimum of 100 us before starting
programming on the MIIM (MDC/MDIO) interface. Set DT property
reset-deassert-us to three times that, 300 us, to provide ample
time between reset deassertion and MDIO access.
The KSZ9031RNX reference manual [1] DS00002117K page 62 TABLE 7-4:
POWER-UP/POWER-DOWN/RESET TIMING PARAMETERS row tSR Stable supply
voltages to de-assertion of reset is at minimum 10 ms. Set DT
property reset-assert-us to 10ms because the KSZ9031RNX RM does
not explicitly spell out how long the reset has to be asserted,
but this at least covers the worst case scenario.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/KSZ9031RNX-Data-Sheet-DS00002117.pdf
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505034325.167797-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The KSZ9031RNX reference manual [1] DS00002117K page 62 FIGURE 7-5:
POWER-UP/POWER-DOWN/RESET TIMING Note 2 states, that after the
de-assertion of reset, wait a minimum of 100 us before starting
programming on the MIIM (MDC/MDIO) interface. Set DT property
reset-deassert-us to three times that, 300 us, to provide ample
time between reset deassertion and MDIO access.
The KSZ9031RNX reference manual [1] DS00002117K page 62 TABLE 7-4:
POWER-UP/POWER-DOWN/RESET TIMING PARAMETERS row tSR Stable supply
voltages to de-assertion of reset is at minimum 10 ms. Set DT
property reset-assert-us to 10ms because the KSZ9031RNX RM does
not explicitly spell out how long the reset has to be asserted,
but this at least covers the worst case scenario.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/KSZ9031RNX-Data-Sheet-DS00002117.pdf
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505034325.167797-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use standard clock-controller node name for the CS2000-CP.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260504225704.115125-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use standard clock-controller node name for the CS2000-CP.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260504225704.115125-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use standard clock-controller node name for the CS2000-CP.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260504225704.115125-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use standard clock-controller node name for the CS2000-CP.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260504225704.115125-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use standard clock-controller node name for the CS2000-CP.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260504225704.115125-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the Renesas R-Car M3Le (R8A779MD) SoC, a variant of the
R-Car M3-N (R8A77965) SoC. The Renesas M3Le SoC is a register-compatible
variant of the R8A77965 (M3-N) with reduced set of peripherals.
Signed-off-by: Nguyen Tran <nguyen.tran.pz@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260504144534.43745-7-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document the compatible value for the Renesas R-Car M3Le (R8A779MD)
SoC and the Renesas Geist development board. The Renesas M3Le SoC is
a register-compatible variant of the R8A77965 (M3-N) with reduced set
of peripherals. The Geist board is derived from Renesas Salvator-X/XS
boards, with adjustment for the R8A779MD SoC.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260504144534.43745-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Document backward compatibility support for the CS2500 chip, which is a
drop-in replacement for the CS2000 chip.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260504144534.43745-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Move all differences into panel-aa104xd12.dtsi, rename OF_GRAPH links to
generic lvds_panel_out and lvds_panel_in names, and parametrize the LVDS
output in use using RENESAS_LVDS_OUTPUT macro. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260504143751.42753-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable the PCIE1 slot available on the RZ/V2N EVK.
Note, the PCIE_REFCLK comes from 5L35023B versa clock generator, once the
support for this clock generator is added, the fixed clock node can be
removed and can be replaced with a reference to the clock generator.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260501105116.33452-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The SoC dtsi already defines the du node with its ports hierarchy,
including the du_out_rgb endpoint node under port@0. There is no need
to redefine the entire ports/port@0 structure in the board-level dtsi.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260420132211.1350656-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/N2H (R9A09G087) SoC has an MTU3 block.
Add support for it.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260410163530.383818-11-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/T2H (R9A09G077) SoC has an MTU3 block.
Add support for it.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260410163530.383818-10-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The TCIU8 interrupt used to be documented in earlier revisions of the
user manuals, but has since been removed. The corresponding entry is
now marked as reserved in the interrupt mapping tables of all supported
SoCs.
- Page 486, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/G2UL
Rev.1.40 User Manual
- Page 363, Table 8.2 Interrupt Mapping (6/13) in the Renesas RZ/Five
Rev.1.30 User Manual
- Page 528, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/G2L
and RZ/G2LC Rev.1.50 User Manual
- Page 540, Table 8.2 Interrupt mapping (7/13) in the Renesas RZ/V2L
Rev.1.50 User Manual
Remove the TCIU8 interrupt. This does not cause any breakage as the
driver does not make use of the interrupts.
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260410163530.383818-9-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On multi-socket platforms each socket has its own BPMP that is
registered with the kernel, so the existing single fixed "bpmp"
debugfs directory name cannot accommodate more than one instance.
Group the per-socket BPMP debugfs entries under a shared top-level
/sys/kernel/debug/bpmp/ directory, with each socket's BPMP device
under a "<numa-node-id>-bpmp" subdirectory:
/sys/kernel/debug/bpmp/0-bpmp/...
/sys/kernel/debug/bpmp/1-bpmp/...
For a multi-socket platform, the root debugfs bpmp/ directory is created
by the first BPMP device that is populated. For single-socket platforms,
the existing directory structure is preserved.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra BPMP debugfs code returns -ENOMEM for most cases where calls
to debugfs_create_dir() or debugfs_create_file() fail. These debugfs
functions return an ERR_PTR with the actual error code on failure.
Therefore, update the Tegra BPMP debugfs code to propagate the actual
error code on failure.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra238 PMC is largely similar to that found on earlier chips, but
not completely compatible. Add support for the PMC on Tegra238.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra PMC power-off handler exists solely to reboot the Nexus 7 into
a special bootloader mode when a USB cable is connected, so that the
bootloader can display battery status instead of powering off. There is
no reason to register it on any other Tegra board.
Guard the registration behind of_machine_is_compatible("asus,grouper")
and rename the handler to tegra_pmc_grouper_power_off_handler to make
its scope explicit. The of_machine_is_compatible() check inside the
handler itself is now redundant and is removed.
This also avoids occupying SYS_OFF_PRIO_FIRMWARE on boards that have
other handlers at that priority level.
Assisted-by: Claude:claude-sonnet-4-6
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The 'powergate' debugfs node is used to show the state of the powergates
but for some devices the 'num_powergates' is 0 and so it displays
nothing. Therefore, only populate this debugfs entry for devices where
num_powergates is greater than 0.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
None of this legacy code is needed on 64-bit ARM devices, so it can be
moved behind a corresponding preprocessor guard. This more cleanly
separates out the legacy code from code needed on current platforms.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
All callers of these functions have been replaced by their variants
taking a PMC context as an input, so they are no longer used and can be
removed.
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
For legacy purposes, an early PMC context is needed to support certain
drivers and functionalities. However, when the PMC driver is probed in
the later boot stages, the early context is no longer needed. Allocate
the PMC context dynamically at probe time so that it can be used going
forward.
While at it, rename the early PMC context to more accurately reflect
what it is used for. It's technically not only for early boot stages,
but also to support some code that doesn't have a way of obtaining the
correct context otherwise (e.g. no access to device tree).
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The driver doesn't make use of the value that was explicitly assigned to
the .driver_data members. Drop the assignment. While touching the array,
convert it to use named initialization which is easier to understand.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260515165135.498505-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260515164848.497608-2-u.kleine-koenig@baylibre.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
* fix order calculation for kho_unpreserve_pages() to make sure sure that
the order calculation in kho_unpreserve_pages() mathes the order
calculation in kho_preserve_pages().
* fix math in calculation of KHO_TREE_MAX_DEPTH to make it work with 16KB
pages.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmobGd4ACgkQOQOGJssO
/ZGaRQf/a0vTak489XqXhddHkulyMnif1UEEYsltxQ8bJkC0SRx+v/PcC0Uf2g7+
n/1vQZxWGUlLawjMDhubCWp2JawRZh9/rzPfb96z3nsjUckaQI3sKdEe7fK9jIVL
2y2QHa26RJj7dlEcJbUToSgVbRrP8qJbiUVjo1i3ViVFsevj1gaNBo8h8oJa694z
S1wXndBz7HYdSNuRgMc5rGUbzgVu9rl2rdTHR6ecRUfTVuQr1ZYrb7v6wi4AI3XL
KZp6TXmDuvPikJwoWsQtBRK5VmLQxsCa5ryu4M+GEBOwezNZex29Yi2TrZWZ2KZk
ViCFzYQLHY7RUrlhL7+tGN2SiLYKqg==
=LtZL
-----END PGP SIGNATURE-----
Merge tag 'liveupdate-fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux
Pull liveupdate fixes from Mike Rapoport:
"Two kexec handover regression fixes:
- fix order calculation for kho_unpreserve_pages() to make sure sure
that the order calculation in kho_unpreserve_pages() mathes the
order calculation in kho_preserve_pages().
- fix math in calculation of KHO_TREE_MAX_DEPTH to make it work with
16KB pages"
* tag 'liveupdate-fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/liveupdate/linux:
kho: fix order calculation for kho_unpreserve_pages()
kho: fix KHO_TREE_MAX_DEPTH for non-4KB page sizes
After refactoring of memblock_free_late() and free_init_pages() it became
possible to call memblock_free() after memblock init data was discarded.
Make sure memblock_free() does not touch memblock.reserved unless it is
called early enough or when ARCH_KEEP_MEMBLOCK is enabled.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmobERsACgkQOQOGJssO
/ZGiqQgArOfAxLDWWinyherNcejWY+GKsNdWNYoGOv8UEw2oTTBmjyrOqHrGcevQ
YlLjBxc2v9LzW9wCRnW0ngoq6/28ABLwyLpB+sMyHU8KaJDyYnAhfe7xt59aqE2N
JuQaSRY8irZG8g2Yks2ZWIPbDoIXJVvGI342L96OYLO63eehV9u5e7kbBebOZpH1
JlnbsaMGjhh2RgLrWWEy4EW1NZ5bYHer6fmCVIlUWtz9X67OjKD5na8bdi9ADEay
Wu2CjYwZFdScM4FQ8r2l9UHxjnU8EQKRxVOm2+hO8wRiE3efzezDCp5Laacvf9o6
KLrkVONfYUpScis3qLpNZly3IjAeVw==
=H1VN
-----END PGP SIGNATURE-----
Merge tag 'fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix regression from memblock_free_late() refactoring
After refactoring of memblock_free_late() and free_init_pages() it
became possible to call memblock_free() after memblock init data was
discarded.
Make sure memblock_free() does not touch memblock.reserved unless it
is called early enough or when ARCH_KEEP_MEMBLOCK is enabled"
* tag 'fixes-2026-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: don't touch memblock arrays when memblock_free() is called late
Clean up the adapter registration error labels by making sure that also
the last one is named after what it does.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Clean up bus id allocation by using a common helper and deferring it
until it is needed during adapter registration.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Adapters can be looked up by their id using i2c_get_adapter() which
takes a reference to the embedded struct device.
Remove the adapter from the IDR before tearing it down during
deregistration (and on registration failure) to make sure its resources
are not accessed after having been freed (e.g. the device name).
Fixes: 35fc37f818 ("i2c: Limit core locking to the necessary sections")
Cc: stable@vger.kernel.org # 2.6.31
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Adapters can be looked up based on their id using i2c_get_adapter()
which takes a reference to the embedded struct device.
Make sure that the adapter (including its struct device) has been
initialised before adding it to the IDR to avoid accessing uninitialised
data which could, for example, lead to NULL-pointer dereferences or
use-after-free.
Note that the i2c-dev chardev, which is registered from a bus notifier,
currently uses i2c_get_adapter() so the adapter needs to be added to the
IDR before registration.
Fixes: 6e13e64184 ("i2c: Add i2c_add_numbered_adapter()")
Cc: stable@vger.kernel.org # 2.6.22
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Runtime PM is disabled by driver core when deregistering a device (and
on registration failure) but add an explicit disable to balance the
enable call when adapter registration fails for symmetry.
Fixes: 23a698fe65 ("i2c: core: treat EPROBE_DEFER when acquiring SCL/SDA GPIOs")
Cc: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Clients can be registered from bus notifier callbacks so the debugfs
directory needs to be created before registering the adapter as clients
use that directory as their debugfs parent.
Move debugfs creation before adapter registration to avoid having
clients create their debugfs directories in the debugfs root (which is
also more likely to fail due to name collisions).
Note that failure to allocate the adapter name must now be handled
explicitly as debugfs_create_dir() cannot handle a NULL name (unlike
device_add() which returns an error).
Fixes: 73febd775b ("i2c: create debugfs entry per adapter")
Cc: stable@vger.kernel.org # 6.8
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Drivers must not probe defer after having registered devices as that
will trigger a probe loop if the devices bind to a driver (cf. commit
fbc35b45f9 ("Add documentation on meaning of -EPROBE_DEFER")).
Move the recovery initialisation, where the GPIO lookup may fail, before
registering the adapter to prevent this.
Fixes: 75820314de ("i2c: core: add generic I2C GPIO recovery")
Cc: stable@vger.kernel.org # 5.9
Cc: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
If adapter registration ever fails the release callback would trigger a
NULL-pointer dereference as the completion struct has not been
initialised.
Note that before the offending commit this would instead have resulted
in a minor memory leak of the adapter name.
Fixes: 3f8c4f5e9a ("i2c: core: fix reference leak in i2c_register_adapter()")
Cc: stable@vger.kernel.org
Cc: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Clients may be registered from bus notifier callbacks when the adapter
is registered. On a subsequent error during registration, the adapter
references taken by such clients prevent the wait for the references to
be released from ever completing.
Fix this by refactoring client deregistration and deregistering also on
late adapter registration failures.
Fixes: f8756c67b3 ("i2c: core: call of_i2c_setup_smbus_alert in i2c_register_adapter")
Cc: stable@vger.kernel.org # 4.15
Cc: Phil Reid <preid@electromag.com.au>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Make sure to tear down the host notify irq domain on adapter
registration failure to avoid leaking it.
This issue was flagged by Sashiko when reviewing another adapter
registration fix.
Fixes: 4d5538f588 ("i2c: use an IRQ to report Host Notify events, not alert")
Cc: stable@vger.kernel.org # 4.10
Cc: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
MCC_ALLOWED_AP_TYPE_CMD exceeds the fixed copied host-command buffer
and triggers warnings in the gen2 enqueue path when command
0xc05 is sent.
Use IWL_HCMD_DFL_NOCOPY as it was done before the offending commit.
Fixes: 078df640ef ("wifi: iwlwifi: mld: add support for iwl_mcc_allowed_ap_type_cmd v2")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260529085453.9af349ab459b.I348df3980764c15efce0099a35fe8a88fb2a6ee2@changeid
TX power constraints must be sent to the firmware before link
activation. If not, the firmware will use default power values.
Fix this by moving the iwl_mld_send_ap_tx_power_constraint_cmd()
call from iwl_mld_start_ap_ibss() to iwl_mld_assign_vif_chanctx(),
before iwl_mld_activate_link() for AP interfaces. Also update
the guard in the function to allow it to run before link activation
for AP interfaces.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260529085453.06c94b01efd2.Id43bdfe5eb030061c23348779687ba71b5f58182@changeid
Convert the repeated register save/restore sequences into macros,
trading some level of implementation trickiness for conciseness (more
than one register can be saved/restored with one invocation) and a
smaller chance of cut and paste errors between VMX and SVM files.
This becomes more useful with the upcoming support for APX, which
would need to add 32 lines to the VM entry/exit paths.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the SEV-ES entry code to use macros for saving guest GPRs,
following VMX/SVM paths. Drop now-unused register offsets and
__VCPU_REGS_* defines.
No functional change intended.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Link: https://patch.msgid.link/20260512011502.53072-4-chang.seok.bae@intel.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the register save/restore sequences in the SVM entry into macros,
following the VMX code. Drop the now-redundant register offset defines.
No functional change intended.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Link: https://patch.msgid.link/20260512011502.53072-3-chang.seok.bae@intel.com/
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Convert the repeated register save/restore sequences into macros,
trading some level of implementation trickiness for conciseness (more
than one register can be saved/restored with one invocation) and a
smaller chance of cut and paste errors.
This is particularly useful in preparation for extended GPR support;
upcoming support for APX would need to add 32 lines to the VM entry/exit
paths.
No functional change intended.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Link: https://lore.kernel.org/6e67df0e-e5f0-43f5-aa86-22e8b01b75d2@redhat.com
Link: https://patch.msgid.link/20260512011502.53072-2-chang.seok.bae@intel.com/
[Keep kvm_vcpu_regs.h and put the macros in there. -Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All buses have been converted from driver_set_override() to the generic
driver_override infrastructure introduced in commit cb3d1049f4
("driver core: generalize driver_override in struct device").
Buses now either opt into the generic sysfs callbacks via the
bus_type::driver_override flag, or use device_set_driver_override() /
__device_set_driver_override() directly.
Thus, remove the now-unused driver_set_override() helper.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260505133935.3772495-6-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
