Replace leading spaces with tabs in the of_device_id table
entries to comply with kernel coding style.
Signed-off-by: Rahman Mahmutović <mahmutovicrahman5@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for the Analog Devices AD5706R, a 4-channel 16-bit
current output digital-to-analog converter with SPI interface.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add device tree binding documentation for the Analog Devices
AD5706R 4-channel 16-bit current output digital-to-analog converter.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
clamp() expects compatible operand types. The period calculation uses
nanosecond constants, while the local target variable was narrower than
the upper bound expression.
Make target unsigned long and use unsigned long bounds, including
NSEC_PER_USEC for the upper limit. This keeps the operands naturally
aligned without adding casts.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giorgi Tchankvetadze <giorgitchankvetadze1997@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for the AD4880, a dual-channel 20-bit 40MSPS SAR ADC with
integrated fully differential amplifiers (FDA).
The AD4880 has two independent ADC channels, each with its own SPI
configuration interface. The driver uses spi_new_ancillary_device() to
create an additional SPI device for the second channel, allowing both
channels to share the same SPI bus with different chip selects.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add support for the AD4880, a dual-channel 20-bit 40MSPS SAR ADC
with integrated fully differential amplifiers (FDA).
The AD4880 has two independent ADC channels, each with its own SPI
configuration interface. This requires:
- Two entries in reg property for primary and secondary channel
chip selects
- Two io-backends entries for the two data channels
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Add a new function to get an IIO backend by its index in the
io-backends device tree property. This is useful for multi-channel
devices that have multiple backends, where looking up by index is
more straightforward than using named backends.
Extract __devm_iio_backend_fwnode_get_by_index() from the existing
__devm_iio_backend_fwnode_get(), taking the index directly as a
parameter. The new public API devm_iio_backend_get_by_index() uses
the index to find the backend reference in the io-backends property,
avoiding the need for io-backend-names.
Reviewed-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The mount-matrix property supplies a 3x3 matrix that is used
to transform the values from the gyroscope to get vector
values that are relative to the way the sensor has been mounted
on the device. When the property is not specified, the identity
matrix is used.
This change adds mount-matrix as an optional property to the
dt-bindings for the bmg160 gyroscope.
Signed-off-by: Vishwas Rajashekar <vishwas.dev@vrajashkr.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Enable audio on the RZ/G3L SMARC EVK by linking SSI0 with the DA7212
audio CODEC. The SSI0 signals are multiplexed with SD2 and are selected
by switch SW_SD2_EN#. Add regulator nodes regulator-{1p8v,3p3v} to the
SoM DTSI for reuse by eMMC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260528074615.91110-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The RZ/G3L SMARC SoM has a Versa 5P35023B clock generator to generate
the following clocks:
- ref: Not connected,
- se1: AUDIO_MCK (11.2896 or 12.2880 MHz),
- se2: RZ_AUDIO_CLK_B (11.2896 MHz),
- se3: RZ_AUDIO_CLK_C (12.2880 MHz),
- diff{1,1B}: ET{0,1}_PHY_CLK (25 MHz),
- diff2{2,2B}: Not connected.
Enable the Vversa 5P35023B clock generator on the RZ/G3L SoM DTSI.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260528074615.91110-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable I2C{2,3} on the RZ/G3L SMARC EVK board. I2C3 is enabled by
setting SW SYS.2 to the OFF position.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260528070239.33352-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RZ/G3L SMARC EVK has 3 user buttons called USER_SW1, USER_SW2 and
USER_SW3. Instantiate the gpio-keys driver for these buttons by
removing place holders and replacing proper pins for the buttons.
USER_SW{1,2,3} are configured as wakeup-sources, so they can wake up the
system during s2idle.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260528070239.33352-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable the xSPI0 and xSPI1 controllers on the RZ/T2H N2H EVK board.
Configure the xSPI0 controller interface to 1-bit (x1) mode, even though
the connected MX25LW51245 octal flash device supports octal mode. Add a
corresponding inline hardware comment detailing this restriction;
operating in octal mode causes the BootROM to fail loading the
first-stage bootloader following a Watchdog Timer (WDT) reset.
Configure the xSPI1 controller interface connected to the AT25SF128A
flash device for 4-bit (x4) mode to utilize all available data lines.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260527202430.606341-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Sort the pinmux entries for both GMAC ctrl nodes in port order (A/B/C and
D/E/F respectively) and remove the extra blank line before the second
pinmux assignment.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260524092016.46346-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the Geist board based on the Renesas R-Car R8A779MD (M3Le)
SoC, a register-compatible variant of the R8A77965 (M3-N) with reduced set
of peripherals.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Nguyen Tran <nguyen.tran.pz@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://patch.msgid.link/20260522172000.15096-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add DMA properties to the serial nodes on the RZ/G2L SoC.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260520132315.944117-1-claudiu.beznea@kernel.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the max-frequency property set to 133333333 Hz (133.33 MHz) to both
SDHI0 and SDHI1 MMC controller nodes in the RZ/V2L (r9a07g054) device
tree, increasing performance by ca. 33%.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260520115144.60067-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the max-frequency property set to 133333333 Hz (133.33 MHz) to both
SDHI0 and SDHI1 MMC controller nodes in the RZ/{G2L,G2LC} (r9a07g044)
device tree, increasing performance by ca. 33%.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260520115144.60067-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add the max-frequency property set to 133333333 Hz (133.33 MHz) to both
SDHI0 and SDHI1 MMC controller nodes in the RZ/{G2UL,Five} (r9a07g043)
device tree, increasing performance by ca. 33%.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260520115144.60067-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Describe the MFIS and MFIS SCP instances which are used for various
tasks including inter-processor communication. Remove the PRR node
because it is part of MFIS on R-Car X5H and should be handled using the
MFIS compatible. Also, describe the S-TCM transport area used for shared
memory mailboxing.
Signed-off-by: Vinh Nguyen <vinh.nguyen.xz@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260519074702.3308-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fully describe all available DRAM in the DT, and describe regions which
are not accessible because they are used by firmware in reserved-memory
nodes.
Replace the first memory bank memory@60600000 with memory@40000000 and a
518 MiB long reserved-memory no-map subnode. This memory region is used
by other cores in the system.
Reserve 32 kiB of memory at 0x8c100000 for parameters shared by IPL,
SCP, TFA BL31 and TEE.
Reserve 512 kiB of memory at 0x8c200000 for TFA BL31. The upcoming
upstream TFA 2.15 BL31 uses memory from 0x8c200000..0x8c242fff; rounding
up to 512 kiB is slight future-proofing.
Reserve 32 MiB of memory at 0x8c400000 for OPTEE-OS, which is the entire
OPTEE-OS TZ protected DRAM area.
Neither TFA BL31 nor OPTEE-OS modify the DT passed to Linux in any way
with any new reserved-memory {} nodes to reserve memory areas used by
the TFA BL31 or OPTEE-OS to prevent the next stage from using those
areas, which lets Linux use all of the available DRAM as it is described
in the DT that was passed in by U-Boot, including the areas that are
newly utilized by TFA BL31 or OPTEE-OS.
In case of high DRAM utilization, unless the memory used by TFA BL31 or
OPTEE-OS is properly reserved, Linux may use and corrupt the memory used
by TFA BL31 or OPTEE-OS, which would lead to the system becoming
unresponsive.
Fixes: ad142a4ef7 ("arm64: dts: renesas: r8a78000: Add initial Ironhide board support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260517163212.18016-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The HW user manual for the Renesas RZ/T2H and the RZ/N2H states that for
SDR104, SDR50, and HS200 to work properly the eMMC/SDHI interface pins
have to be configured as specified below:
- SDn_CLK pin - drive strength: Ultra High, slew rate: Fast,
- Other SDn_* pins: drive strength: High, slew rate: Fast,
Schmitt trigger: disabled (not applicable to SDn_RST pins).
HS DDR and DDR50 are currently not supported, and for every other bus
mode the eMMC/SDHI interface pins should be configured as specified
below:
- SDn_CLK pin - drive strength: High, slew rate: Fast,
- Other SDn_* pins: drive strength: Middle, slew rate: Fast,
Schmitt trigger: disabled (not applicable to SDn_RST pins).
Adjust the pin definitions accordingly.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20260514210220.7616-1-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas R-Car X5H (R8A78000) SoC contains Arm CoreLink GIC-720AE
Generic Interrupt Controller with Multi View capability. Firmware has
access to configuration View 0, Linux kernel has access to View 1.
The Arm CoreLink GIC-720AE Generic Interrupt Controller Technical
Reference Manual, currently latest r2p1 [1], chapter "5. Programmers
model for GIC-720AE", subchapter "5.4 Redistributor registers
for control and physical LPIs summary", part "5.4.3 GICR_TYPER,
Redistributor Type Register", "Table 5-50: GICR_TYPER bit descriptions"
on page 200, clarifies register "GICR_TYPER" bit 4 "Last" behavior
in Multi View setup as follows:
Last
Last Redistributor:
0 ... This Redistributor is not the last Redistributor on the chip.
1 ... This Redistributor is the last Redistributor on the chip.
When GICD_CFGID.VIEW == 1, for views 1, 2, or 3 this bit
always returns 1.
On this SoC, GICD_CFGID.VIEW is 1 and the Linux kernel has access to
View 1, therefore Linux kernel GICv3 driver will interpret register
"GICR_TYPER" bit 4 "Last" = 1 in the first Redistributor in continuous
Redistributor page as that first Redistributor being the one and only
Redistributor and will stop processing the continuous Redistributor
page further. This will prevent the other Redistributors from being
recognized by the system and used for other PEs.
Because the hardware indicates that the continuous Redistributor page
is not continuous for View 1, 2, or 3, describe every Redistributor
separately in the DT. This makes all Redistributors for all cores
accessible in Linux.
[1] https://documentation-service.arm.com/static/69ef3c1cd35efd294e335c43
Arm® CoreLink™ GIC-720AE Generic Interrupt Controller
Revision: r2p1 / Issue 12 / 102666_0201_12_en
Fixes: 63500d12cf ("arm64: dts: renesas: Add R8A78000 SoC support")
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260514125328.20954-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Describe SMC based PSCI access in SoC DT. The system can interact with
TFA BL31 PSCI provider running on the Cortex-A cores via SMC calls.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260513225037.49803-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The RZ/V2N SoC provides an internal RTC, which is enabled in the DT.
The RZ/V2N EVK board also includes an external RTC in the RAA215300
PMIC.
Add an "rtc0" alias pointing to the on-SoC RTC node to ensure a stable
device numbering.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260506155804.3984418-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The RZ/V2H SoC provides an internal RTC, which is enabled in the DT.
The RZ/V2H EVK board also includes an external RTC in the RAA215300
PMIC.
Add an "rtc0" alias pointing to the on-SoC RTC node to ensure a stable
device numbering.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260506155804.3984418-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add audio_clk1 and audio_clk2 fixed-clock nodes to the RZ/G3L (r9a08g046)
SoC DTSI. These clocks are external to the SoC and their frequencies are
board-dependent, so they are defined with clock-frequency = <0> as
placeholders that must be overridden in board-level DTS files.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505123708.134069-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add i2c{0..3} device nodes to RZ/G3L ("R9A08G046") SoC DTSI.
As the place holders for i2c0 is removed, add the pincontrol
device nodes to make it functional on the board DTS.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505070206.7932-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
We need to properly map camss WM index to our internal WM client
instance. Today we only support RDI interfaces with the RDI_WM
macro, introduce a __wm_to_client helper to support any interface.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add PIX path support to the CSID-340 driver. The hardware exposes a
dedicated PIX interface in addition to the existing RDI paths, but
the driver only supported RDI stream configuration so far.
The PIX path is configured similarly to RDI but requires decode-format
to be specified.
The PIX pipeline can subsequently perform further processing,
including scaling, cropping, and statistics.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The CSID-340 block uses different register offsets for the PIX and RDI
interfaces, but the driver previously indexed these registers directly
with the camss port number. This happened to work for RDI because the
port index matches the RDI register layout, but this assumption breaks
with upcoming PIX interface support
Introduce an explicit port-to-interface mapping and use the mapped iface
index when programming CSID_CFG0 and CSID_CTRL. This replaces the
standalone __csid_ctrl_rdi() helper and simplifies the RDI stream setup
path.
Also correct the CSID_CFG0/CTRL base offsets and clean up the code in
preparation for full PIX path support.
Like RDI, PIX outputs Bayer frames but can also achieve some image
processing such as scaling, cropping and generating statitics (e.g.
histogram), it also offer more flexebility in term of image alignment
and stride. All of that can then later be leveraged to improve
software or hardware frames post-processing.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The former RDI-specific register definitions (CSID_RDI_CFG0/CTRL) are
renamed to unified CSID_CFG0/CSID_CTRL variants, as their layout is
interface agnostic. This refactoring provides the foundation for
extending csid-340 with missing PIX interface/path support.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The KSZ9031RNX reference manual [1] DS00002117K page 62 FIGURE 7-5:
POWER-UP/POWER-DOWN/RESET TIMING Note 2 states, that after the
de-assertion of reset, wait a minimum of 100 us before starting
programming on the MIIM (MDC/MDIO) interface. Set DT property
reset-deassert-us to three times that, 300 us, to provide ample
time between reset deassertion and MDIO access.
The KSZ9031RNX reference manual [1] DS00002117K page 62 TABLE 7-4:
POWER-UP/POWER-DOWN/RESET TIMING PARAMETERS row tSR Stable supply
voltages to de-assertion of reset is at minimum 10 ms. Set DT
property reset-assert-us to 10ms because the KSZ9031RNX RM does
not explicitly spell out how long the reset has to be asserted,
but this at least covers the worst case scenario.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/KSZ9031RNX-Data-Sheet-DS00002117.pdf
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505034325.167797-12-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The KSZ9031RNX reference manual [1] DS00002117K page 62 FIGURE 7-5:
POWER-UP/POWER-DOWN/RESET TIMING Note 2 states, that after the
de-assertion of reset, wait a minimum of 100 us before starting
programming on the MIIM (MDC/MDIO) interface. Set DT property
reset-deassert-us to three times that, 300 us, to provide ample
time between reset deassertion and MDIO access.
The KSZ9031RNX reference manual [1] DS00002117K page 62 TABLE 7-4:
POWER-UP/POWER-DOWN/RESET TIMING PARAMETERS row tSR Stable supply
voltages to de-assertion of reset is at minimum 10 ms. Set DT
property reset-assert-us to 10ms because the KSZ9031RNX RM does
not explicitly spell out how long the reset has to be asserted,
but this at least covers the worst case scenario.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/KSZ9031RNX-Data-Sheet-DS00002117.pdf
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505034325.167797-11-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The KSZ9031RNX reference manual [1] DS00002117K page 62 FIGURE 7-5:
POWER-UP/POWER-DOWN/RESET TIMING Note 2 states, that after the
de-assertion of reset, wait a minimum of 100 us before starting
programming on the MIIM (MDC/MDIO) interface. Set DT property
reset-deassert-us to three times that, 300 us, to provide ample
time between reset deassertion and MDIO access.
The KSZ9031RNX reference manual [1] DS00002117K page 62 TABLE 7-4:
POWER-UP/POWER-DOWN/RESET TIMING PARAMETERS row tSR Stable supply
voltages to de-assertion of reset is at minimum 10 ms. Set DT
property reset-assert-us to 10ms because the KSZ9031RNX RM does
not explicitly spell out how long the reset has to be asserted,
but this at least covers the worst case scenario.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/KSZ9031RNX-Data-Sheet-DS00002117.pdf
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505034325.167797-10-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The KSZ9031RNX reference manual [1] DS00002117K page 62 FIGURE 7-5:
POWER-UP/POWER-DOWN/RESET TIMING Note 2 states, that after the
de-assertion of reset, wait a minimum of 100 us before starting
programming on the MIIM (MDC/MDIO) interface. Set DT property
reset-deassert-us to three times that, 300 us, to provide ample
time between reset deassertion and MDIO access.
The KSZ9031RNX reference manual [1] DS00002117K page 62 TABLE 7-4:
POWER-UP/POWER-DOWN/RESET TIMING PARAMETERS row tSR Stable supply
voltages to de-assertion of reset is at minimum 10 ms. Set DT
property reset-assert-us to 10ms because the KSZ9031RNX RM does
not explicitly spell out how long the reset has to be asserted,
but this at least covers the worst case scenario.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/KSZ9031RNX-Data-Sheet-DS00002117.pdf
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505034325.167797-9-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The KSZ9031RNX reference manual [1] DS00002117K page 62 FIGURE 7-5:
POWER-UP/POWER-DOWN/RESET TIMING Note 2 states, that after the
de-assertion of reset, wait a minimum of 100 us before starting
programming on the MIIM (MDC/MDIO) interface. Set DT property
reset-deassert-us to three times that, 300 us, to provide ample
time between reset deassertion and MDIO access.
The KSZ9031RNX reference manual [1] DS00002117K page 62 TABLE 7-4:
POWER-UP/POWER-DOWN/RESET TIMING PARAMETERS row tSR Stable supply
voltages to de-assertion of reset is at minimum 10 ms. Set DT
property reset-assert-us to 10ms because the KSZ9031RNX RM does
not explicitly spell out how long the reset has to be asserted,
but this at least covers the worst case scenario.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/KSZ9031RNX-Data-Sheet-DS00002117.pdf
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505034325.167797-8-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The KSZ9031RNX reference manual [1] DS00002117K page 62 FIGURE 7-5:
POWER-UP/POWER-DOWN/RESET TIMING Note 2 states, that after the
de-assertion of reset, wait a minimum of 100 us before starting
programming on the MIIM (MDC/MDIO) interface. Set DT property
reset-deassert-us to three times that, 300 us, to provide ample
time between reset deassertion and MDIO access.
The KSZ9031RNX reference manual [1] DS00002117K page 62 TABLE 7-4:
POWER-UP/POWER-DOWN/RESET TIMING PARAMETERS row tSR Stable supply
voltages to de-assertion of reset is at minimum 10 ms. Set DT
property reset-assert-us to 10ms because the KSZ9031RNX RM does
not explicitly spell out how long the reset has to be asserted,
but this at least covers the worst case scenario.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/KSZ9031RNX-Data-Sheet-DS00002117.pdf
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505034325.167797-7-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The KSZ9031RNX reference manual [1] DS00002117K page 62 FIGURE 7-5:
POWER-UP/POWER-DOWN/RESET TIMING Note 2 states, that after the
de-assertion of reset, wait a minimum of 100 us before starting
programming on the MIIM (MDC/MDIO) interface. Set DT property
reset-deassert-us to three times that, 300 us, to provide ample
time between reset deassertion and MDIO access.
The KSZ9031RNX reference manual [1] DS00002117K page 62 TABLE 7-4:
POWER-UP/POWER-DOWN/RESET TIMING PARAMETERS row tSR Stable supply
voltages to de-assertion of reset is at minimum 10 ms. Set DT
property reset-assert-us to 10ms because the KSZ9031RNX RM does
not explicitly spell out how long the reset has to be asserted,
but this at least covers the worst case scenario.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/KSZ9031RNX-Data-Sheet-DS00002117.pdf
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505034325.167797-6-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The KSZ9031RNX reference manual [1] DS00002117K page 62 FIGURE 7-5:
POWER-UP/POWER-DOWN/RESET TIMING Note 2 states, that after the
de-assertion of reset, wait a minimum of 100 us before starting
programming on the MIIM (MDC/MDIO) interface. Set DT property
reset-deassert-us to three times that, 300 us, to provide ample
time between reset deassertion and MDIO access.
The KSZ9031RNX reference manual [1] DS00002117K page 62 TABLE 7-4:
POWER-UP/POWER-DOWN/RESET TIMING PARAMETERS row tSR Stable supply
voltages to de-assertion of reset is at minimum 10 ms. Set DT
property reset-assert-us to 10ms because the KSZ9031RNX RM does
not explicitly spell out how long the reset has to be asserted,
but this at least covers the worst case scenario.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/KSZ9031RNX-Data-Sheet-DS00002117.pdf
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505034325.167797-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The KSZ9031RNX reference manual [1] DS00002117K page 62 FIGURE 7-5:
POWER-UP/POWER-DOWN/RESET TIMING Note 2 states, that after the
de-assertion of reset, wait a minimum of 100 us before starting
programming on the MIIM (MDC/MDIO) interface. Set DT property
reset-deassert-us to three times that, 300 us, to provide ample
time between reset deassertion and MDIO access.
The KSZ9031RNX reference manual [1] DS00002117K page 62 TABLE 7-4:
POWER-UP/POWER-DOWN/RESET TIMING PARAMETERS row tSR Stable supply
voltages to de-assertion of reset is at minimum 10 ms. Set DT
property reset-assert-us to 10ms because the KSZ9031RNX RM does
not explicitly spell out how long the reset has to be asserted,
but this at least covers the worst case scenario.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/KSZ9031RNX-Data-Sheet-DS00002117.pdf
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260505034325.167797-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
