Add a new file encapsulating most of the PCI NHI specifics
(intentionally leaving some odd cookies behind to make the layering
simpler). Most notably, separate out nhi_probe() to make it easier to
register other types of NHIs.
Also, fold in Intel Icelake (nhi_ops.c) support to contain all
PCIe-related bits in pci.c.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Not all USB4/TB implementations are based on a PCIe-attached
controller. In order to make way for these, start off with moving the
pci_device reference out of the main tb_nhi structure.
Encapsulate the existing struct in a new tb_nhi_pci, that shall also
house all properties that relate to the parent bus. Similarly, any
other type of controller will be expected to contain tb_nhi as a
member.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The unload_page callback expects the return value of load_page() as its
argument: ret = load_page(va); unload(ret). Fix the rollback code in
simple_ring_buffer_init_mm() where the descriptor's VA is used instead
of the loaded page address.
Link: https://patch.msgid.link/20260512141614.1759430-1-vdonnefort@google.com
Fixes: 635923081c ("tracing: load/unload page callbacks for simple_ring_buffer")
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
nr_subbufs in the ring buffer metadata is always initialized to zero
because it is assigned from cpu_buffer->nr_pages before the page
initialization loop has run. While nr_subbufs is not currently read
by the kernel, it should reflect the actual buffer geometry in the
meta page for correctness.
Move the assignment after the page loop so that cpu_buffer->nr_pages
holds the final count.
Link: https://patch.msgid.link/20260512135420.99194-1-devnexen@gmail.com
Fixes: 34e5b958bd ("tracing: Introduce simple_ring_buffer")
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On real hardware, panic and machine reboot may not flush hardware cache
to memory. This means the persistent ring buffer, which relies on a
coherent state of memory, may not have its events written to the buffer
and they may be lost. Moreover, there may be inconsistency with the
counters which are used for validation of the integrity of the
persistent ring buffer which may cause all data to be discarded.
To avoid this issue, stop recording of the ring buffer on panic and
flush the cache of the ring buffer's memory.
Fixes: e645535a95 ("tracing: Add option to use memmapped memory for trace boot instance")
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://patch.msgid.link/177751969602.2136606.12031934362587643488.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When tracing is active while reading the trace file, if the iterator
reading the buffer detects that the writer has passed the iterator head,
it will reset and set a "missed events" flag. This flag is passed to the
output processing to show the user that events were missed:
CPU:4 [LOST EVENTS]
The problem is that the flag is reset after it is checked in
ring_buffer_iter_dropped(). But the "trace" file iterates over all the CPU
ring buffers and it will check if they are dropped when figuring out which
buffer to print next. This prematurely clears the missed_events flag if
the CPU buffer with the missed events is not the one that is printed next.
On the iteration where the CPU buffer with the missed events is printed,
the check if it had missed events would return false and the output does
not show that events were missed.
Do not reset the missed_events flag when checking if there were missed
events, but instead clear it when moving the iterator head to the next
event.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260520220801.4fd09d13@fedora
Fixes: c9b7a4a72f ("ring-buffer/tracing: Have iterator acknowledge dropped events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix the pidfd leak in kselftest_harness.h's __wait_for_test() where
childfd = syscall(__NR_pidfd_open, t->pid, 0) is never closed.
Fixes: 73a3cde976 ("selftests: harness: Implement test timeouts through pidfd")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://patch.msgid.link/a82e275ccfb2609a1984d90ab559fa3af78f1e81.1776678050.git.tanggeliang@kylinos.cn
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
When a buffer is freed either by LRU eviction or because it is unset,
the lockref is marked as dead instantly, which prevents the buffer from
being used after finding it in the buffer hash in xfs_buf_lookup and
xfs_buf_find_insert. But the latter will then not add the new buffer to
the hash because it already found an existing buffer.
Fix this using in two places: Remove the buffer from the hash before
marking the lockref dead so that that no buffer with a dead lockref can
be found in the hash, but if we find one in xfs_buf_find_insert due to
store reordering, handle this case correctly instead of returning an
unhashed buffer.
Fixes: 67fe430397 ("xfs: don't keep a reference for buffers on the LRU")
Reported-by: Andrey Albershteyn <aalbersh@redhat.com>
Reported-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Andrey Albershteyn <aalbersh@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Both GNU and BSD makes share a "token pipe" between their instances, as
a result a -j $BIGNUM invocation results in multicore perf problems in
the poll handler.
Avoiding the store will reduce it a little bit. However, the crux of the
problem is the locked queuing up in poll_wait().
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20260516021852.256932-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Symlinks can't appear as opened file.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Link: https://patch.msgid.link/295235c7-7f68-4554-bb6f-85398beca350@p183
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Drop the hard-coded length argument and use the simpler QSTR(). Inline
the code and drop the local variable.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260505114242.158883-2-thorsten.blum@linux.dev
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Christoph Hellwig <hch@lst.de> says:
Due to an almost comical failure on my part, my work in progress test
case failed to create any file system on a 64k block size loop device,
and then tried to mount it, leading to a probe of file system built
into my kernel. Roughly the first half of the series are file systems
that actually crashed, but I fixed up all the pattern of missing
error handling that I saw.
* patches from https://patch.msgid.link/20260511071701.2456211-1-hch@lst.de:
omfs: handle set_blocksize failures
ntfs3: handle set_blocksize failures
minix: handle set_blocksize failures
isofs: handle set_blocksize failures
affs: handle set_blocksize failures
befs: handle set_blocksize failures
jfs: handle set_blocksize failures
qnx4: handle set_blocksize failures
hpfs: handle set_blocksize failures
bfs: handle set_blocksize failures
Link: https://patch.msgid.link/20260511071701.2456211-1-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
omfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511071701.2456211-11-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
ntfs3 uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511071701.2456211-10-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
minix uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511071701.2456211-9-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
isofs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511071701.2456211-8-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
affs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511071701.2456211-7-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
befs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511071701.2456211-6-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
jfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511071701.2456211-5-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
qnx4 uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511071701.2456211-4-hch@lst.de
Acked-by: Anders Larsen <al@alarsen.net>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
hpfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511071701.2456211-3-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
bfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511071701.2456211-2-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
This document is motivated by the ongoing maintenance burden that
abandoned and untestable filesystems impose on VFS developers, blocking
infrastructure changes such as folio conversions and iomap migration.
This week alone, two new filesystems were proposed on linux-fsdevel
(VMUFAT and FTRFS), highlighting the need for documented guidelines
that new filesystem authors can refer to before submission.
Multiple recent discussions on linux-fsdevel have touched on the
criteria for merging new filesystems and for deprecating old ones,
covering topics such as modern VFS interface adoption, testability,
userspace utilities, maintainer commitment, and user base viability.
Add Documentation/filesystems/adding-new-filesystems.rst describing
the technical requirements and community expectations for merging a
new filesystem into the kernel. The guidelines cover:
- Alternatives to consider before proposing a new in-kernel filesystem
- Technical requirements: modern VFS interfaces (iomap, folios,
fs_context mount API), testability, and userspace utilities
- Community expectations: identified maintainers, demonstrated
commitment, sustained backing, and a clear user base
- Ongoing obligations after merging, including the risk of deprecation
for unmaintained filesystems
Link: https://lore.kernel.org/linux-fsdevel/20260411151155.321214-1-adrianmcmenamin@gmail.com/
Link: https://lore.kernel.org/linux-fsdevel/20260413142357.515792-1-aurelien@hackers.camp/
Link: https://lore.kernel.org/linux-fsdevel/yndtg2jbj55fzd2kkhsmel4pp5ll5xfvfiaqh24tdct3jiqosd@jzbfzf3rrxrd/
Link: https://lore.kernel.org/linux-fsdevel/20260124091742.GA43313@macsyma.local/
Link: https://lore.kernel.org/lkml/20260111140345.3866-1-linkinjeon@kernel.org/
Cc: Christian Brauner <brauner@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Assisted-by: Cursor:claude-4-opus
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260422125212.1743006-1-amir73il@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
If d_flags isn't what we expect, then it's good to display it. Add a new
DENTRY_WARN_ONCE() macro that also displays d_flags for the dentry.
Change D_FLAG_VERIFY() to call that instead of a generic WARN_ON_ONCE().
Change the existing hlist_unhashed() check in dentry_free() to use the
new macro, and add checks for other invariants of a dead dentry. Notably:
1) Ensure that DCACHE_LRU_LIST and DCACHE_SHRINK_LIST are not set.
2) Ensure that d_lockref is negative
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260422-dcache-warn-v1-1-50155e1b40b6@kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Currently, writing to 'core_pattern' or 'suid_dumpable' sysctl nodes
always triggers validate_coredump_safety(), even if the values have
not changed. This results in redundant warning messages in dmesg:
"Unsafe core_pattern used with fs.suid_dumpable=2..."
This patch optimizes the procfs handlers to only invoke the safety
validation when an actual change in the configuration is detected:
1. In proc_dostring_coredump(), compare the new core_pattern string
with the existing one using strncmp().
2. In proc_dointvec_minmax_coredump(), check if the new suid_dumpable
value differs from the previous one.
This keeps the kernel log clean from repetitive warnings when
re-applying the same sysctl settings.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://patch.msgid.link/20260410080918.2319-1-lirongqing@baidu.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com> says:
This series is a preparation for
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 23ff24080dfd..aebd3a5e90af 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -477,7 +477,11 @@ struct rpmsg_device_id {
struct i2c_device_id {
char name[I2C_NAME_SIZE];
- kernel_ulong_t driver_data; /* Data private to the driver */
+ union {
+ /* Data private to the driver */
+ kernel_ulong_t driver_data;
+ const void *driver_data_ptr;
+ };
};
/* pci_epf */
and this requires that .driver_data is assigned via a named initializer
for static data. This requirement isn't a bad one because named
initializers are also much better readable than list initializers.
The union added to struct i2c_device_id enables further cleanups like:
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 8a082ff034dd..b2aac7348d22 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1429,7 +1429,7 @@ static int kxcjk1013_probe(struct i2c_client *client)
if (id) {
name = id->name;
- data->info = (const struct kx_chipset_info *)(id->driver_data);
+ data->info = id->driver_data_ptr;
} else {
name = iio_get_acpi_device_name_and_data(&client->dev, &ddata);
data->info = ddata;
@@ -1630,11 +1630,11 @@ static const struct dev_pm_ops kxcjk1013_pm_ops = {
};
static const struct i2c_device_id kxcjk1013_id[] = {
- { .name = "kxcjk1013", .driver_data = (kernel_ulong_t)&kxcjk1013_info },
- { .name = "kxcj91008", .driver_data = (kernel_ulong_t)&kxcj91008_info },
- { .name = "kxtj21009", .driver_data = (kernel_ulong_t)&kxtj21009_info },
- { .name = "kxtf9", .driver_data = (kernel_ulong_t)&kxtf9_info },
- { .name = "kx023-1025", .driver_data = (kernel_ulong_t)&kx0231025_info },
+ { .name = "kxcjk1013", .driver_data_ptr = &kxcjk1013_info },
+ { .name = "kxcj91008", .driver_data_ptr = &kxcj91008_info },
+ { .name = "kxtj21009", .driver_data_ptr = &kxtj21009_info },
+ { .name = "kxtf9", .driver_data_ptr = &kxtf9_info },
+ { .name = "kx023-1025", .driver_data_ptr = &kx0231025_info },
{ }
};
MODULE_DEVICE_TABLE(i2c, kxcjk1013_id);
that are an improvement for readability (again!) and it keeps some
properties of the pointers (here: being const) without having to pay
attention for that. (I didn't find a good example in sound/soc, so an
iio driver was used to demonstrate the gain.)
My additional motivation for this effort is CHERI[1]. This is a hardware
extension that uses 128 bit pointers but unsigned long is still 64 bit.
So with CHERI you cannot store pointers in unsigned long variables.
The first patch drops a few empty remove callbacks that I found while
working on patch #2. The second converts all hwmon drivers to use named
initializers.
Link: https://patch.msgid.link/cover.1778692164.git.u.kleine-koenig@baylibre.com
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
While touching all these arrays, unify indention and usage of commas.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/ae2ff4898eb340bd8bcafb7b75443eb4a0ce3e76.1778692164.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A remove callback that does nothing has the same semantic (apart from a
debug output) as no such callback at all as i2c_device_remove() just does:
if (driver->remove) {
dev_dbg(dev, "remove\n");
driver->remove(client);
}
Remove these useless callbacks.
While touching the driver structs, unify indention.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/3afd8230634dd68ac7c1885ee2b01da377349f89.1778692164.git.u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPI controller API is asymmetric in that a controller is allocated
and registered in two step, while it is freed as part of deregistration.
[1]
This is especially unfortunate as any driver data is freed along with
the controller, something which has lead to use-after-free bugs during
deregistration when drivers tear down resources after deregistering the
controller (or tear down resources that may still be in use before
deregistering the controller in an attempt to work around the API).
To reduce the risk of such bugs being introduced a device managed
allocation interface was added, but this arguably made things even less
consistent as now whether the controller gets freed as part of
deregistration depends on how it was allocated. [2][3]
With most drivers converted to use managed allocation in preparation for
fixing the API, the remaining 16 drivers can be converted in one
tree-wide change. Ten of those drivers use the bitbang interface and can
be converted by simply removing the extra reference already taken by
spi_bitbang_start() (and updating the two bitbang drivers that use
managed allocation). [4]
Fix the API inconsistency by no longer dropping a reference when
deregistering non-devres allocated controllers.
[1] 68b892f1fd ("spi: document odd controller reference handling")
[2] 5e844cc37a ("spi: Introduce device-managed SPI controller allocation")
[3] 3f174274d2 ("spi: fix misleading controller deregistration kernel-doc")
[4] 702a4879ec ("spi: bitbang: Let spi_bitbang_start() take a reference to master")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260521073816.766596-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
After commit 059b7dbd20 ("vsock/virtio: fix potential unbounded skb
queue"), virtio_transport_inc_rx_pkt() subtracts per-skb overhead from
buf_alloc when checking whether a new packet fits. This reduces the
effective receive buffer below what the user configured via
SO_VM_SOCKETS_BUFFER_SIZE, causing legitimate data packets to be
silently dropped and applications that rely on the full buffer size
to deadlock.
Also, the reduced space is not communicated to the remote peer, so
its credit calculation accounts more credit than the receiver will
actually accept, causing data loss (there is no retransmission).
With this approach we currently have failures in
tools/testing/vsock/vsock_test.c. Test 18 sometimes fails, while
test 22 always fails in this way:
18 - SOCK_STREAM MSG_ZEROCOPY...hash mismatch
22 - SOCK_STREAM virtio credit update + SO_RCVLOWAT...send failed:
Resource temporarily unavailable
Fix by allowing at most `buf_alloc * 2` as the total budget for payload
plus skb overhead in virtio_transport_inc_rx_pkt(), similar to how
SO_RCVBUF is doubled to reserve space for sk_buff metadata.
This preserves the full buf_alloc for payload under normal operation,
while still bounding the skb queue growth.
With this patch, all tests in tools/testing/vsock/vsock_test.c are
now passing again.
Fixes: 059b7dbd20 ("vsock/virtio: fix potential unbounded skb queue")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260518090656.134588-3-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When there is no more space to queue an incoming packet, the packet is
silently dropped. This causes data loss without any notification to
either peer, since there is no retransmission.
Under normal circumstances, this should never happen. However, it could
happen if the other peer doesn't respect the credit, or if the skb
overhead, which we recently began to take into account with commit
059b7dbd20 ("vsock/virtio: fix potential unbounded skb queue"),
is too high.
Fix this by resetting the connection and setting the local socket error
to ENOBUFS when virtio_transport_recv_enqueue() can no longer queue a
packet, so both peers are explicitly notified of the failure rather than
silently losing data.
Fixes: ae6fcfbf5f ("vsock/virtio: discard packets if credit is not respected")
Cc: stable@vger.kernel.org
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260518090656.134588-2-sgarzare@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If a kcontrol update comes to a control right at the same time when the
PCM containing the control is started up then there is a small window when
a race can happen:
while the widget is set up the swidget->setup_mutex is taken in topology
level and if the control update comes at this point, it will be stopped
within sof_ipc4_set_get_kcontrol_data() with the mutex and it will be
blocked until the swidget setup is done, which will clear the control's
IPC message payload.
To avoid such race, use local copy of the template IPC message instead of
the template directly. This will ensure data integrity in case of
concurrent updates during initialization.
Link: https://github.com/thesofproject/linux/issues/5734
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260520141349.9625-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Wei Fang says:
====================
Add preliminary NETC switch support for i.MX94
i.MX94 NETC (v4.3) integrates 802.1Q Ethernet switch functionality, the
switch provides advanced QoS with 8 traffic classes and a full range of
TSN standards capabilities. It has 3 user ports and 1 CPU port, and the
CPU port is connected to an internal ENETC through the pseduo link, so
instead of a back-to-back MAC, the lightweight "pseudo MAC" is used at
both ends of the pseudo link to transfer Ethernet frames. The pseudo
link provides a zero-copy interface (no serialization delay) and lower
power (less logic and memory).
Like most Ethernet switches, the NETC switch also supports a proprietary
switch tag, is used to carry in-band metadata information about frames.
This in-band metadata information can include the source port from which
the frame was received, what was the reason why this frame got forwarded
to the entity, and for the entity to indicate the precise destination
port of a frame. The NETC switch tag is added to frames after the source
MAC address. There are three types of switch tags, and each type has 1
to 4 subtypes, more details are as follows.
Forward switch tag (Type = 0): Represents forwarded frames.
- SubType = 0 - Normal frame processing.
To_Port switch tag (Type = 1): Represents frames that are to be sent to
a specific switch port.
- SubType = 0. No request to perform timestamping.
- SubType = 1. Request to perform one-step timestamping.
- SubType = 2. Request to perform two-step timestamping.
- SubType = 3. Request to perform both one-step timestamping and
two-step timestamping.
To_Host switch tag (Type = 2): Represents frames redirected or copied to
the switch management port.
- SubType = 0. Received frames redirected or copied to the switch
management port.
- SubType = 1. Received frames redirected or copied to the switch
management port with captured timestamp at the switch port where
the frame was received.
- SubType = 2. Transmit timestamp response (two-step timestamping).
Currently, this patch set supports Forward tag, SubType 0 of To_Port tag
and SubType 0 of To_Host tag. More tags will be supported in the future.
In addition, the switch supports NETC Table Management Protocol (NTMP),
some switch functionality is controlled using control messages sent to
the hardware using BD ring interface with 32B descriptors similar to the
packet Transmit BD ring used on ENETC. This interface is referred to as
the command BD ring. This is used to configure functionality where the
underlying resources may be shared between different entities or being
too large to configure using direct registers.
For this patch set, we have supported the following tables through the
command BD ring interface.
FDB Table: It contains forwarding and/or filtering information about MAC
addresses. The FDB table is used for MAC learning lookups and MAC
forwarding lookups.
VLAN Filter Table: It contains configuration and control information for
each VLAN configured on the switch.
Buffer Pool Table: It contains buffer pool configuration and operational
information. Each entry corresponds to a buffer pool. Currently, we use
this table to implement flow control feature on each port.
Ingress Port Filter Table: It contains a set of filters each capable of
classifying incoming traffic using a mix of L2, L3, and L4 parsed and
arbitrary field data. We use this table to implement host flood support
to the switch port.
The switch also supports other tables, and we will add more advanced
features through them in the future.
====================
Link: https://patch.msgid.link/20260518082506.1318236-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement the ethtool private statistics interface to expose additional
port-level and MAC-level counters that are not covered by the standard
IEEE 802.3 statistics. The pMAC counters are only reported when the port
supports Frame Preemption (802.1Qbu/802.3br).
Note that although rtnl_link_stats64 provides some standard statistics
such as rx octets, rx frame errors, rx dropped packets, and tx packets,
these are overall port statistics. The NETC switch supports preemption
on each port, and each port has two MACs (eMAC and pMAC). The driver
private statistics are used to obtain statistics for each MAC, allowing
users to perform analysis and debugging.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-16-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Each user port of the NETC switch supports 802.3 basic and mandatory
managed objects statistic counters and IETF Management Information
Database (MIB) package (RFC2665) and Remote Network Monitoring (RMON)
counters. And all of these counters are 64-bit registers. In addition,
some user ports support preemption, so these ports have two MACs, MAC
0 is the express MAC (eMAC), MAC 1 is the preemptible MAC (pMAC). So
for ports that support preemption, the statistics are the sum of the
pMAC and eMAC statistics.
Note that the current switch driver does not support preemption, all
frames are sent and received via the eMAC by default. The statistics
read from the pMAC should be zero.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-15-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The buffer pool is a quantity of memory available for buffering a group
of flows (e.g. frames having the same priority, frames received from the
same port), while waiting to be transmitted on a port. The buffer pool
tracks internal memory consumption with upper bound limits and optionally
a non-shared portion when associated with a shared buffer pool. Currently
the shared buffer pool is not supported, it will be added in the future.
For i.MX94, the switch has 4 ports and 8 buffer pools, so each port is
allocated two buffer pools. For frames with priorities of 0 to 3, they
will be mapped to the first buffer pool; For frames with priorities of
4 to 7, they will be mapped to the second buffer pool. Each buffer pool
has a flow control on threshold and a flow control off threshold. By
setting these threshold, add the flow control support to each port.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-14-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Expand the NETC switch driver with several foundational features:
- FDB and MDB management
- STP state handling
- MTU configuration
- Port setup/teardown
- Host flooding support
At this stage, the driver operates only in standalone port mode. Each
port uses VLAN 0 as its PVID, meaning ingress frames are internally
assigned VID 0 regardless of whether they arrive tagged or untagged.
Note that this does not inject a VLAN 0 header into the frame, the VID
is used purely for subsequent VLAN processing within the switch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-13-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Different versions of NETC switches have different numbers of ports and
MAC capabilities. Add .phylink_get_caps() to struct netc_switch_info,
allowing each NETC switch version to implement its own callback for
obtaining MAC capabilities.
Implement the phylink_mac_ops callbacks: .mac_config(), .mac_link_up(),
and .mac_link_down(). Note that flow-control configuration is not yet
supported in .mac_link_up(), but will be implemented in a subsequent
patch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260518082506.1318236-12-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For i.MX94 series, the NETC IP provides full 802.1Q Ethernet switch
functionality, advanced QoS with 8 traffic classes, and a full range of
TSN standards capabilities. The switch has 3 user ports and 1 CPU port,
the CPU port is connected to an internal ENETC. Since the switch and the
internal ENETC are fully integrated within the NETC IP, no back-to-back
MAC connection is required. Instead, a light-weight "pseudo MAC" is used
between the switch and the ENETC. This translates to lower power (less
logic and memory) and lower delay (as there is no serialization delay
across this link).
Introduce the initial NETC switch driver with basic probe and remove
functionality. More features will be added in subsequent patches.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-11-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The NXP NETC switch tag is a proprietary header added to frames after the
source MAC address. The switch tag has 3 types, and each type has 1 ~ 4
subtypes, the details are as follows.
Forward NXP switch tag (Type=0): Represents forwarded frames.
- SubType = 0 - Normal frame processing.
To_Port NXP switch tag (Type=1): Represents frames that are to be sent
to a specific switch port.
- SubType = 0. No request to perform timestamping.
- SubType = 1. Request to perform one-step timestamping.
- SubType = 2. Request to perform two-step timestamping.
- SubType = 3. Request to perform both one-step timestamping and
two-step timestamping.
To_Host NXP switch tag (Type=2): Represents frames redirected or copied
to the switch management port.
- SubType = 0. Received frames redirected or copied to the switch
management port.
- SubType = 1. Received frames redirected or copied to the switch
management port with captured timestamp at the switch port where
the frame was received.
- SubType = 2. Transmit timestamp response (two-step timestamping).
In addition, the length of different type switch tag is different, the
minimum length is 6 bytes, the maximum length is 14 bytes. Currently,
Forward tag, SubType 0 of To_Port tag and Subtype 0 of To_Host tag are
supported. More tags will be supported in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-10-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All the tables of NETC switch are managed through the command BD ring,
but unlike ENETC, the switch has two command BD rings, if the current
ring is busy, the switch driver can switch to another ring to manage
the table. Currently, the NTMP driver does not support multiple rings.
Therefore, update ntmp_select_and_lock_cbdr() to select a appropriate
ring to execute the command for the switch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-9-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ingress port filter table (IPFT )contains a set of filters each
capable of classifying incoming traffic using a mix of L2, L3, and L4
parsed and arbitrary field data. As a result of a filter match, several
actions can be specified such as on whether to deny or allow a frame,
overriding internal QoS attributes associated with the frame and setting
parameters for the subsequent frame processing functions, such as stream
identification, policing, ingress mirroring. Each entry corresponds to a
filter. The ingress port filter entries are added using a precedence
value. If a frame matches multiple entries, the entry with the higher
precedence is used. Currently, this patch only adds "Add" and "Delete"
operations to the ingress port filter table. These two interfaces will
be used by both ENETC driver and NETC switch driver.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-8-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The buffer pool table contains buffer pool configuration and operational
information. Each entry corresponds to a buffer pool. The Entry ID value
represents the buffer pool ID to access.
The buffer pool table is a static bounded index table, buffer pools are
always present and enabled. It only supports Update and Query operations,
This patch only adds ntmp_bpt_update_entry() helper to support updating
the specified entry of the buffer pool table. Query action to the table
will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-7-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The VLAN filter table contains configuration and control information for
each VLAN configured on the switch. Each VLAN entry includes the VLAN
port membership, which FID to use in the FDB lookup, which spanning tree
group to use, the egress frame modification actions to apply to a frame
exiting form this VLAN, and various configuration and control parameters
for this VLAN.
The VLAN filter table can only be managed by the command BD ring using
table management protocol version 2.0. The table supports Add, Delete,
Update and Query operations. And the table supports 3 access methods:
Entry ID, Exact Match Key Element and Search. But currently we only add
the ntmp_vft_add_entry() helper to support the upcoming switch driver to
add an entry to the VLAN filter table. Other interfaces will be added in
the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-6-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The FDB table is used for MAC learning lookups and MAC forwarding lookups.
Each table entry includes information such as a FID and MAC address that
may be unicast or multicast and a forwarding destination field containing
a port bitmap identifying the associated port(s) with the MAC address.
FDB table entries can be static or dynamic. Static entries are added from
software whereby dynamic entries are added either by software or by the
hardware as MAC addresses are learned in the datapath.
The FDB table can only be managed by the command BD ring using table
management protocol version 2.0. Table management command operations Add,
Delete, Update and Query are supported. And the FDB table supports three
access methods: Entry ID, Exact Match Key Element and Search. This patch
adds the following basic supports to the FDB table.
ntmp_fdbt_update_entry() - update the configuration element data of a
specified FDB entry
ntmp_fdbt_delete_entry() - delete a specified FDB entry
ntmp_fdbt_add_entry() - add an entry into the FDB table
ntmp_fdbt_search_port_entry() - Search the FDB entry on the specified
port based on RESUME_ENTRY_ID.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-5-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
