Driver core expects devices to be dynamically allocated and will, for
example, complain loudly if a device that lacks a release function is
ever freed.
Use root_device_register() to allocate and register the root device
instead of open coding using a static device.
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patch.msgid.link/20260424104011.2616970-1-johan@kernel.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Extend the existing Tegra186 GPIO controller driver with support for the
GPIO controller found on Tegra238.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Link: https://patch.msgid.link/20260514124835.108532-2-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Extend the existing Tegra186 GPIO controller device tree bindings with
support for the GPIO controllers found on Tegra238. Tegra238 has two
GPIO controllers: the main controller and always-on (AON) controller.
The number of pins is slightly different, but the programming model
remains the same.
Add a new header, include/dt-bindings/gpio/nvidia,tegra238-gpio.h,
that defines port IDs as well as the TEGRA238_MAIN_GPIO() helper,
both of which are used in conjunction to create a unique specifier
for each pin.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260514124835.108532-1-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Regions with a BO are checked against the BO size, but the SRAM
region is not. The SRAM region doesn't have a BO, but the command stream
region size should be checked against the SRAM size. The job's
"sram_size" isn't useful here because an evil userspace could lie about
the size.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260513185434.1667045-1-robh@kernel.org
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Introduce device-managed helpers for clocksource registration.
The clocksource framework currently provides __clocksource_register_scale()
along with convenience wrappers for Hz and kHz registration. However,
drivers must handle error paths and cleanup manually, typically by pairing
registration with an explicit clocksource_unregister() call.
Add a devm-based variant, __devm_clocksource_register_scale(), along with
devm_clocksource_register_hz() and devm_clocksource_register_khz() helpers.
These helpers register the clocksource and attach a devres action to
automatically unregister it on driver detach or probe failure.
This simplifies driver code by:
* removing explicit cleanup paths
* ensuring correct teardown ordering
* aligning with the devm-based resource management model widely used
across the kernel
While drivers can open-code devm_add_action_or_reset(), providing a
dedicated helper avoids duplication, reduces boilerplate, and ensures
consistent usage across drivers, following patterns used in other
subsystems.
This is also particularly useful for drivers built as modules, where
device-managed resource handling avoids manual cleanup in remove paths and
ensures correct teardown on module unload.
This helper is self-contained and can be adopted progressively by drivers.
No functional change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260506153831.605159-1-daniel.lezcano@oss.qualcomm.com
Before, when rtla got a signal, it stopped the main trace but not the
record trace. With "--on-end trace", this can lead to
save_trace_to_file() failing to keep up, especially on a debug kernel.
Plus, it adds post-stoppage noise to the trace file.
Signed-off-by: Crystal Wood <crwood@redhat.com>
Fixes: c73cab9dbe ("rtla/timerlat_hist: Stop timerlat tracer on signal")
Fixes: a4dfce7559 ("rtla/timerlat_top: Stop timerlat tracer on signal")
Fixes: 3aadb65db5 ("rtla/timerlat: Add action on end feature")
Link: https://lore.kernel.org/r/20260512173731.2151841-1-crwood@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Add unit tests covering all functions in the actions module, including
both valid and invalid inputs and all action types, except for
actions_perform(), where only shell and continue actions are tested.
To support testing multiple modules, the unit test build was modified so
that it links the entire rtla-in.o file. For this to work, the main()
function in rtla.c was declared weak, so that the unit test main is able
to override it.
Other included minor changes to unit tests are:
- Make unit test output verbose to show which tests are being run, now
that we have more than 3 tests.
- Add unit_tests file to .gitignore.
- Split unit test sources to one file per test suite, and keep only
main() function in unit_tests.c.
- Fix Makefile dependencies so that "make unit-tests" will rebuild the
binary with the changes in the commit.
Also with the linking the entire rtla-in.o file, it now has rtla's
nr_cpus symbol, so the declaration in utils unit tests is made extern.
Assisted-by: Composer:composer-2-fast
Link: https://lore.kernel.org/r/20260424140244.958495-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Add a new script check-cgroup-match.sh that retrieves the cgroup of the
main rtla process and compares it to the cgroup of the rtla workload
threads.
Add a new test based on this script, for both osnoise and timerlat
tools, testing the variant of -C without argument (which sets the cgroup
of the workload to the cgroup of the rtla main process).
Note that this has to be tested in kernel mode to be significant for
timerlat tool, as user workloads inherit the parent rtla process cgroup
even without the option.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-10-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Add runtime test for rtla-timerlat's -k/--kernel-threads and
-u/--user-threads options using get_workload_pids.sh to check whether
the appropriate threads are being created.
The tests are implemented for both top and hist. Additionally, all tests
related to timerlat threads are moved to a separate section in the test
files. The latter is also done for rtla-osnoise tests.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-9-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Add a runtime test for -H/--house-keeping option for both osnoise and
timerlat tools, with affinity checking similar to what is done for
-c/--cpus.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-8-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Cover all options regarding histogram formatting for both
rtla-osnoise-hist and rtla-timerlat-hist tools. All options also have
output checking using positive or negative match, except for
-b/--bucket-size and -E/--entries, which cannot be tested in isolated
due to the output depending on the actual data collected.
Old -E/--entries test for rtla-osnoise was replaced with a new one
equivalent to the timerlat one.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-7-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
rtla-timerlat-top's --aa-only option is currently only tested for return
value.
Extend the tests to also check that only auto-analysis is being done via
a negative match for the "Timer Latency" text in the top header, and
further split the test case into two:
- one test case for --aa-only stopping on threshold
- one test case for --aa-only exiting without threshold being hit
For both cases, the expected output ("analyzing it" or "Max latency was"
respectively) is checked against in addition to the negative match.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-6-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
For testing the -a/--auto option in timerlat tool, the string "analyzing
it" is matched against to make sure auto-analysis was triggered.
Use the same string as a negative match for --aa-only option test.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-5-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
RTLA runtime tests verify the -c/--cpus options, but do not check
whether the correct affinity is actually applied.
Add a script named check-cpus.sh that retrieves the affinity of all
workload threads and use it to check the -c/--cpus option for both
osnoise and timerlat tools.
Also add missing -c/--cpus test for osnoise.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-4-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
RTLA runtime tests that check workload processes (currently the test
case "verify -P/--priority" of timerlat.t and "verify the --priority/-P
param" of osnoise.t) use "pgrep timerlatu/" or "pgrep osnoise/"
respectively to identify the workload.
Make them more robust by adding a get_workload_pids() helper that
finds the main rtla process and returns the PIDs of all siblings other
than the test script itself, plus all child processes of kthreadd that
have the osnoise/timerlat kthread pattern comm.
This filters out any spurious processes not related to the running test
that happen to have "timerlatu/" or "osnoise/" in their command, for
example, a user grepping the same names at the time of the running of
the test.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-3-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
RTLA runtime tests currently do not cover both tool variants for osnoise
and timerlat properly. Many tests applicable to both tools are only
tested for one tool, selected randomly.
Introduce two new shell functions, check_top_hist() and
check_top_q_hist(). The functions use the same syntax as check() and run
check() on the arguments twice: once replacing the "TOOL" string in the
command with "top" (or "top -q"), once replacing it with "hist". The top
-q variant is used for tests relying on messages printed after aborting
the RTLA main loop with a starting new line, which only happens for top
tools in quiet mode; without -q, the top output is printed on the same
line and the matches would fail.
Tests that are applicable to both top and hist tools were modified to
the run for both; additionally, tests that were already done for both
tools were migrated to the new shell functions, unless the test command
or matches differ between the tools. Additional tests were added to test
tool-specific help messages.
Reviewed-by: Wander Lairson Costa <wander@redhat.com>
Link: https://lore.kernel.org/r/20260423130558.882022-2-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Fix --dump-task to --dump-tasks in timerlat_hist usage string
and getopt_long table for consistency with timerlat_top.
Add missing --dump-tasks to timerlat_top usage synopsis.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Fixes: 2091336b9a ("rtla/timerlat_hist: Add auto-analysis support")
Link: https://lore.kernel.org/r/20260414185223.65353-1-costa.shul@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
'struct configfs_item_operations' and 'configfs_group_operations' are not
modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
6677 2776 64 9517 252d drivers/infiniband/core/cma_configfs.o
After:
=====
text data bss dec hex filename
6901 2552 64 9517 252d drivers/infiniband/core/cma_configfs.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/6acd9c8a79b868b5e541a7e080a6b4b145e4fd4f.1778923041.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Most drivers do this already, but some open-code a memset. Switch
all instances found. qedr_copy_qp_uresp() is already called with
zeroed memory so that memset is redundant.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
All of these are fully initialized so no bugs are being fixed. Add
the missing initializer as a precaution against future changes.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
At some point the response structs were added and rdma-core is using
them, but the kernel was not changed to use them as well. Replace
the open-coded copy with the right struct and ib_respond_udata().
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The Mellanox drivers have a pattern where they compute the response
length they think they need based on what the user asked for, then
blindly write that ignoring the provided size limit on the response
structure.
Drop this and just use ib_respond_udata() which caps the response
struct to the user's memory, which is fine for what mlx5 is doing.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
These cases carefully work around 32-bit unpadded structures, but
the min integrated into ib_respond_udata() handles this
automatically. Zero-initialize data that would not have been copied.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Convert the pattern:
ib_copy_to_udata(udata, &resp, sizeof(resp));
Using Coccinelle:
@@
identifier resp;
expression udata;
@@
- ib_copy_to_udata(udata, &resp, sizeof(resp))
+ ib_respond_udata(udata, resp)
Run another pass with AI to propagate the return code correctly and
remove redundant prints.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Use copy_to_user() directly since the data is not being placed in the
udata response memory.
It is unclear why this is trying to do two copies, but leave it alone.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Convert the pattern:
if (udata->inlen && !ib_is_udata_cleared(udata, 0, udata->inlen))
Using Coccinelle:
virtual patch
virtual context
virtual report
@@
expression udata;
@@
(
- udata->inlen && !ib_is_udata_cleared(udata, 0, udata->inlen)
+ !ib_is_udata_in_empty(udata)
|
- udata->inlen > 0 && !ib_is_udata_cleared(udata, 0, udata->inlen)
+ !ib_is_udata_in_empty(udata)
)
@@
expression udata;
@@
- udata && udata->inlen && !ib_is_udata_cleared(udata, 0, udata->inlen)
+ !ib_is_udata_in_empty(udata)
These cases are already checking for zeroed data that the kernel does
not understand.
Run another pass with AI to propagate the return code correctly and
remove redundant prints.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
While being more verbose using a named initializer yields easier to
understand code and doesn't rely on the two hidden zeros in the
PCI_VDEVICE macro.
While at it, also drop the explicit zero in the terminating entry.
This doesn't introduce any changes to the compiled result of the array,
which was confirmed on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260507075437.2669363-2-u.kleine-koenig@baylibre.com
Reviewed-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Simplify umem allocation by using flexible array member.
Add __counted_by to get extra runtime analysis.
Suggested-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Bernard Metzler <bernard.metzler@linux.dev>
Link: https://patch.msgid.link/20260511141149.52362-1-bernard.metzler@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The variable 'rc' is initialized to 0 and returned at the end of
bng_re_process_qp_event(), but it is never modified in between.
Simplify the function by removing the redundant variable and returning 0
directly. This cleans up the code and avoids potential compiler warnings
about unused variables.
Signed-off-by: Rohit Chavan <roheetchavan@gmail.com>
Link: https://patch.msgid.link/20260505085709.1755534-1-roheetchavan@gmail.com
Reviewed-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
hns RoCE supports 4 congestion control algorithms. Each algorihm
involves multiple parameters. Support configuring these parameters
by debugfs.
Here are some examples of this feature:
* The directory structure:
$ ls /sys/kernel/debug/hns_roce/0000\:35\:00.0/
dcqcn_cc_param dip_cc_param hc3_cc_param ldcp_cc_param
$ ls /sys/kernel/debug/hns_roce/0000\:35\:00.0/dcqcn_cc_param/
ai al alp ashift cnp_time f g lifespan max_speed tkp tmp
* Read the value of a param:
$ cat /sys/kernel/debug/hns_roce/0000\:35\:00.0/dcqcn_cc_param/ai
1
* Set a new value for a param:
$ echo 2 > /sys/kernel/debug/hns_roce/0000\:35\:00.0/dcqcn_cc_param/ai
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260507012148.1079712-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The debugfs file was created before seq->read and seq->data were set,
leaving a small window where userspace could access an uninitialized
seqfile.
Move debugfs_create_file() after the assignments to avoid this issue.
Also, inline the original init_debugfs_seqfile() since it is not a
really necessary helper.
Fixes: ca7ad04cd5 ("RDMA/hns: Add debugfs to hns RoCE")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20260507012148.1079712-2-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Simplify the calculation of medium blue flame registers by using the
max() macro instead of open-coded ternary logic. This improves
readability and aligns with the subsystem's preference for using
standard kernel helpers.
Signed-off-by: Rohit Chavan <roheetchavan@gmail.com>
Link: https://patch.msgid.link/20260505100550.1810139-1-roheetchavan@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
imm_buf->len is a user-controlled uint32_t received from the network.
Adding it to imm_data_offset without overflow checking allows a
malicious initiator to send len=0xFFFFFFFF, causing req_size to wrap
around to a small value, bypassing the bounds check, and subsequently
passing a ~4GB length to sg_init_one().
Use check_add_overflow() to detect wrapping before the comparison.
Fixes: 5dabcd0456 ("RDMA/srpt: Add support for immediate data")
Reported-by: Carlos Bilbao (Lambda) <carlos.bilbao@kernel.org>
Signed-off-by: Sara Venkatesh <sarajvenkatesh@gmail.com>
Link: https://patch.msgid.link/20260504080036.3482415-1-sarajvenkatesh@gmail.com
Reviewed-by: Carlos Bilbao (Lambda) <carlos.bilbao@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The conversion from seconds to jiffies is currently performed by
multiplying the value by 1000 and passing it to msecs_to_jiffies().
Use the more direct secs_to_jiffies() helper instead. This simplifies the
code, improves readability, and avoids the manual multiplication step
by using the dedicated kernel API.
Signed-off-by: Rohit Chavan <roheetchavan@gmail.com>
Link: https://patch.msgid.link/20260505075308.1754861-1-roheetchavan@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The functions kfree() and kvfree() can occasionally trigger a long
chain of calls or face contention in the slab allocator. Executing
these inside a spinlock increases the risk of CPU stalls and increases
lock contention under heavy event load.
Move the memory freeing logic out of the critical sections in devx.c
by using temporary lists and local flags. This narrows the lock's
scope to only protect the list integrity and state transitions.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://patch.msgid.link/20260503023349.1959-1-lirongqing@baidu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
MLX5_IB_METHOD_DEVX_SUBSCRIBE_EVENT() links event_sub into sub_list
before initializing the fields used by the shared error path.
If eventfd_ctx_fdget() then fails, the unwind path dereferences
event_sub->ev_file in uverbs_uobject_put() and calls
subscribe_event_xa_dealloc() with an unset xa_key_level1.
subscribe_event_xa_alloc() creates the XA entry exactly once for a given
key_level1, on the first occurrence of that key. The unwind path must
therefore call subscribe_event_xa_dealloc() exactly once for it as well.
Enforce that by adding devx_key_in_sub_list() and calling
subscribe_event_xa_dealloc() only when the last matching pending entry is
being cleaned up.
Fixes: 7597385371 ("IB/mlx5: Enable subscription for device events over DEVX")
Signed-off-by: Prathamesh Deshpande <prathameshdeshpande7@gmail.com>
Link: https://patch.msgid.link/20260428224319.37682-1-prathameshdeshpande7@gmail.com
Reviewed-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
mlx5r_umr_update_xlt() allocates and DMA maps an XLT buffer with
mlx5r_umr_create_xlt(). The buffer is released by the common cleanup path
through mlx5r_umr_unmap_free_xlt().
After mlx5_odp_populate_xlt() became fallible, its error path returned
directly and skipped that cleanup. This leaks the XLT DMA mapping and
buffer. If the emergency XLT page was used, it also leaves
xlt_emergency_page_mutex locked.
Break out of the loop so execution falls through the existing cleanup path.
Fixes: 1efe8c0670 ("RDMA/core: Convert UMEM ODP DMA mapping to caching IOVA and page linkage")
Signed-off-by: Prathamesh Deshpande <prathameshdeshpande7@gmail.com>
Link: https://patch.msgid.link/20260426132356.22264-1-prathameshdeshpande7@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
EFA devices added support for CRC16 checksum on admin responses and to
expose it to the driver the API version increased to 0.2. Add a check
for support on device init and if supported validate the checksum on
each admin response the driver receives. If the checksum validation
failed, drop the CQE.
Add the CRC16 module to Kconfig to have the in-tree dependency.
Reviewed-by: Firas Jahjah <firasj@amazon.com>
Reviewed-by: Michael Margolin <mrgolin@amazon.com>
Signed-off-by: Yonatan Nachum <ynachum@amazon.com>
Link: https://patch.msgid.link/20260409074905.3126023-1-ynachum@amazon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Create a virtual TUN net device with RXE support, then run rping
server and client to invoke networking packets, finally compare both
*port_xmit_data* and *port_rcv_data* of such device.
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20260414062948.671658-5-zhenwei.pi@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
In RXE, hardware counters are already supported, but not in a
standardized manner. For instance, user-space monitoring tools like
atop only read from the *counters* directory. Therefore, it is
necessary to add perf management support to RXE.
Also use rxe_counter_get instead of raw atomic64_read in hw-counters.
Signed-off-by: zhenwei pi <zhenwei.pi@linux.dev>
Link: https://patch.msgid.link/20260414062948.671658-4-zhenwei.pi@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Suggested by Leon, remove the rxe_ib_device_get_netdev() wrapper and
the RXE_PORT definition. These additions do not improve readability,
and RXE has always had only a single port.
Signed-off-by: zhenwei pi <zhenwei.pi@linux.dev>
Link: https://patch.msgid.link/20260414062948.671658-2-zhenwei.pi@linux.dev
Signed-off-by: Leon Romanovsky <leon@kernel.org>
If bt_num is 3 or 2, then the expressions like
l0_idx * chunk_ba_num + l1_idx are computed in 32-bit
arithmetic before being assigned to a u64 index field,
which can lead to overflow.
Cast the first operand to u64 to ensure the arithmetic
is performed in 64-bit.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2f49de21f3 ("RDMA/hns: Optimize mhop get flow for multi-hop addressing")
Signed-off-by: Alexander Chesnokov <Alexander.Chesnokov@kaspersky.com>
Link: https://patch.msgid.link/20260413091527.39990-1-Alexander.Chesnokov@kaspersky.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The responder CQE path determines the link layer via
rdma_port_get_link_layer(). Use qp->port instead of
hardcoding port 1, which can mis-decode completions on
multi-port devices.
Signed-off-by: Chenguang Zhao <zhaochenguang@kylinos.cn>
Link: https://patch.msgid.link/20260410074046.2044595-1-zhaochenguang@kylinos.cn
Signed-off-by: Leon Romanovsky <leon@kernel.org>
mlx5_ib_alloc_transport_domain() allocates a transport domain and then
may fail in mlx5_ib_enable_lb(). In that case, the allocated TD is leaked.
Fix this by deallocating the TD when mlx5_ib_enable_lb() returns an
error. Also return 0 explicitly in the no-loopback-capability success
branch, and move dev->lb.mutex initialization to mlx5_ib_stage_init_init().
Fixes: 146d2f1af3 ("IB/mlx5: Allocate a Transport Domain for each ucontext")
Signed-off-by: Prathamesh Deshpande <prathameshdeshpande7@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
