dlfb_ops_mmap() uses remap_pfn_range() to map vmalloc framebuffer pages
to userspace but sets no vm_ops on the VMA. This means the kernel cannot
track active mmaps. When dlfb_realloc_framebuffer() replaces the backing
buffer via FBIOPUT_VSCREENINFO, existing mmap PTEs are not invalidated.
On USB disconnect, dlfb_ops_destroy() calls vfree() on the old pages
while userspace PTEs still reference them, resulting in a use-after-free:
the process retains read/write access to freed kernel pages.
Add vm_operations_struct with open/close callbacks that maintain an
atomic mmap_count on struct dlfb_data. In dlfb_realloc_framebuffer(),
check mmap_count and return -EBUSY if the buffer is currently mapped,
preventing buffer replacement while userspace holds stale PTEs.
Tested with PoC using dummy_hcd + raw_gadget USB device emulation.
Signed-off-by: Rajat Gupta <rajgupt@qti.qualcomm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
The i2c block on the Apple silicon t8122 (M3) SoC is compatible with the
existing driver. Add "apple,t8122-i2c" as SoC specific compatible under
"apple,t8103-i2c" used by the deriver.
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Bitwise OR | operator has a higher precedence than the ternary ?:
operatior. It will be incorrectly evaluated as:
new->data[1] |= (FIELD_PREP(...) | dev_data->ats_enabled) ? DTE_FLAG_IOTLB : 0;
Wrap the conditional operation in parentheses to enforce the
correct evaluation order.
Fixes: 93eee2a49c ("iommu/amd: Refactor logic to program the host page table in DTE")
Signed-off-by: Weinan Liu <wnliu@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
- Debugfs multi-LRC engine info (Xin Wang, 2 commits)
Expose multi-LRC engine classes in the debugfs engine info output
and improve the output readability.
- drm/drm_ras: Add clear-error-counter netlink command to drm_ras
Cross-subsystem Changes:
Core Changes:
- drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- drm/i915/display: switch to including common step file directly
Driver Changes:
- Engine initialization cleanup (Matt Roper, 10 commits)
Clean up engine initialization code inherited from i915 by moving
hardware programming (CCS enablement, HWSTAM, GFX_MODE, BLIT_CCTL,
STOP_RING) into the RTP infrastructure. This makes the programming
visible and verifiable via debugfs, and applies consistently across
both normal and execlist init paths. Also fixes the name/definition
of GFX_MODE, marks BCS engines as belonging to the GT forcewake
domain, and drops the now-unused xe_hw_engine_mmio_write32() helper.
- PF fair scheduling auto-provisioning (Michal Wajdeczko, 13 commits)
Fix several corner cases in SR-IOV PF scheduling policy provisioning,
then auto-provision PF and all VFs with 16ms execution-quantum and
preemption-timeout defaults. This prevents a VF from monopolizing
the GPU by submitting workloads without gaps, without requiring the
user to configure sysfs manually.
- System Controller support for CRI/Xe3p (Anoop Vijay + Raag Jadav, 10 commits)
Add xe_sysctrl infrastructure for communicating with the System
Controller firmware entity on CRI/Xe3p discrete GPU platforms via a
mailbox interface. Includes type definitions, register definitions,
mailbox communication, initialization, power management, interrupt
handling, and event dispatch. Builds on this to add initial RAS
correctable error handling, using sysctrl interrupts to receive
threshold-crossed events.
- PXP state machine fixes (Daniele Ceraolo Spurio, 4 commits)
Fix PXP state machine handling: reject PXP sessions on PTL platforms
with older GSC firmware that does not support it, fix the restart
flag not being cleared after jumping back in pxp_start, remove
incorrect handling of an impossible state during suspend, and clean
up termination status on failure.
- Reset/wedge/unload corner case fixes (Zhanjun Dong + Matthew Brost, 5 commits)
Fix memory leaks and fence signal failures that occurred during GPU
reset, device wedging, and driver unload by forcefully tearing down
remaining exec queues in GuC submit fini, always killing queues in
pause/abort, and triggering queue cleanup when not in wedged mode 2.
Also ensures GuC CT state transitions via STOP before DISABLED.
- Wedge path memory allocation fixes (Matthew Brost, 3 commits)
Avoid GFP_KERNEL allocations in xe_device_declare_wedged(), which
runs in the DMA-fence signaling path. Also drops the
guc_submit_wedged_fini devm registration from xe_guc_submit_wedge()
to clean up the wedge shutdown sequence.
- PAT type cleanup and invalid index hardening (Xin Wang, 3 commits)
Standardize pat_index fields to u16 across the driver, default
XE_CACHE_NONE_COMPRESSION to XE_PAT_INVALID_IDX (matching
WB_COMPRESSION), and introduce xe_cache_pat_idx() — a macro helper
that validates cache_mode bounds and asserts on invalid PAT indices
before returning the index.
- Reject unsafe PAT indices for CPU cached memory (Jia Yao, 2 commits)
Reject incoherent (coh_none) PAT indices for CPU cached memory in
both the madvise ioctl and vm_bind with CPU_ADDR_MIRROR flag, closing
a security gap where the GPU could bypass CPU caches and observe
stale or sensitive data.
- OA improvements for CRI device memory (Ashutosh Dixit, 3 commits)
Move OA buffer access to the xe_map layer to support both system and
device memory (required for CRI), switch OA buffer mmap to use
drm_gem_mmap_obj, and implement workaround Wa_14026633728.
- xe_drm.h documentation fixes (Shuicheng Lin, 6 commits)
Fix multiple documentation issues in the xe_drm.h UAPI header:
typos, spelling errors, grammar, wrong names and references,
kernel-doc cross-reference syntax, and broken code examples.
- kernel-doc syntax fixes in xe headers (Shuicheng Lin, 4 commits)
Fix kernel-doc syntax issues across xe header files: missing '@'
prefixes on member tags, stale/mismatched member tags, comment
syntax errors, and type/parameter name mismatches in references.
- Buffer object and DMA-buf resource leak fixes (Shuicheng Lin, 4 commits)
Fix resource leaks on error paths: DMA-buf attachment leak in
xe_gem_prime_import(), BO leak in xe_dma_buf_init_obj() on
allocation failure, and BO leaks in xe_bo_init_locked() on GGTT
flag validation and unaligned size validation failures.
- Include guard cleanup (Shuicheng Lin, 5 commits)
Fix and standardize include guards across xe header files: normalize
double-underscore guards to single, add missing leading/trailing
underscores, add missing _H suffixes, and add guards to previously
unprotected headers.
- VF CCS memory pool (Satyanarayana K V P, 2 commits)
Switch VF CCS read/write operations from the DRM sub-allocator to
DRM mm, fixing allocation failures in fence-disabled mode where
the sub-allocator's hole cursor assumption breaks. Also introduces
a general BO-backed memory pool with shadow support using drm_mm.
- i915/xe step definition unification (Jani Nikula, 3 commits)
Complete the migration to the shared intel_step header: switch xe
from its own xe_step enum to the shared intel_step naming and
definitions, and update i915 display code to include the common
step header directly.
- Xe3p GT tuning fixes (3 commits)
Three Xe3p GT tuning corrections: fix the register offset for
GAMSTLB_CTRL, stop applying the CCCHKNREG1 tuning from Xe3p onward
(no longer needed), and mark ROW_CHICKEN5 as a masked register.
- Forcewake cleanup in GT and GuC PC (Raag Jadav, 3 commits)
Drop a redundant forcewake reference in xe_gt, reorder forcewake
usage in xe_guc_pc_fini_hw() to avoid a redundant hold, and convert
xe_guc_pc_stop() to void since it can no longer fail.
- SVM garbage collector fix on close (Matthew Brost, 2 commits)
Disable the SVM garbage collector work item when an SVM is closed
to prevent use-after-free when the GC fires after the SVM is freed.
- Admin-only PF mode (Satyanarayana K V P, 2 commits)
Derive an "admin-only PF" mode flag from xe_device state instead of
using a local flag, and restrict device query responses when running
in admin-only PF mode to avoid exposing internal state.
- Enable hwmon energy attributes and accepted power limit for CRI (2 commits)
Enable energy consumption hwmon attributes for the CRI platform and
add support for reading the accepted (sustained) power limit via
hwmon.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCafNROQAKCRC4FpNVCsYG
v31cAQCS/7wH9kwyUxQZOgs/HfuZvbgu5IyrGxaDSrHY7twRtAD7BhvkfOcyB9VK
6M2a7Y+QiVICgwjuDiwXikJalmRBmQE=
=Y9j3
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2026-04-30' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Debugfs multi-LRC engine info (Xin Wang, 2 commits)
Expose multi-LRC engine classes in the debugfs engine info output
and improve the output readability.
- drm/drm_ras: Add clear-error-counter netlink command to drm_ras
Cross-subsystem Changes:
Core Changes:
- drm/gpusvm: Reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- drm/i915/display: switch to including common step file directly
Driver Changes:
- Engine initialization cleanup (Matt Roper, 10 commits)
Clean up engine initialization code inherited from i915 by moving
hardware programming (CCS enablement, HWSTAM, GFX_MODE, BLIT_CCTL,
STOP_RING) into the RTP infrastructure. This makes the programming
visible and verifiable via debugfs, and applies consistently across
both normal and execlist init paths. Also fixes the name/definition
of GFX_MODE, marks BCS engines as belonging to the GT forcewake
domain, and drops the now-unused xe_hw_engine_mmio_write32() helper.
- PF fair scheduling auto-provisioning (Michal Wajdeczko, 13 commits)
Fix several corner cases in SR-IOV PF scheduling policy provisioning,
then auto-provision PF and all VFs with 16ms execution-quantum and
preemption-timeout defaults. This prevents a VF from monopolizing
the GPU by submitting workloads without gaps, without requiring the
user to configure sysfs manually.
- System Controller support for CRI/Xe3p (Anoop Vijay + Raag Jadav, 10 commits)
Add xe_sysctrl infrastructure for communicating with the System
Controller firmware entity on CRI/Xe3p discrete GPU platforms via a
mailbox interface. Includes type definitions, register definitions,
mailbox communication, initialization, power management, interrupt
handling, and event dispatch. Builds on this to add initial RAS
correctable error handling, using sysctrl interrupts to receive
threshold-crossed events.
- PXP state machine fixes (Daniele Ceraolo Spurio, 4 commits)
Fix PXP state machine handling: reject PXP sessions on PTL platforms
with older GSC firmware that does not support it, fix the restart
flag not being cleared after jumping back in pxp_start, remove
incorrect handling of an impossible state during suspend, and clean
up termination status on failure.
- Reset/wedge/unload corner case fixes (Zhanjun Dong + Matthew Brost, 5 commits)
Fix memory leaks and fence signal failures that occurred during GPU
reset, device wedging, and driver unload by forcefully tearing down
remaining exec queues in GuC submit fini, always killing queues in
pause/abort, and triggering queue cleanup when not in wedged mode 2.
Also ensures GuC CT state transitions via STOP before DISABLED.
- Wedge path memory allocation fixes (Matthew Brost, 3 commits)
Avoid GFP_KERNEL allocations in xe_device_declare_wedged(), which
runs in the DMA-fence signaling path. Also drops the
guc_submit_wedged_fini devm registration from xe_guc_submit_wedge()
to clean up the wedge shutdown sequence.
- PAT type cleanup and invalid index hardening (Xin Wang, 3 commits)
Standardize pat_index fields to u16 across the driver, default
XE_CACHE_NONE_COMPRESSION to XE_PAT_INVALID_IDX (matching
WB_COMPRESSION), and introduce xe_cache_pat_idx() — a macro helper
that validates cache_mode bounds and asserts on invalid PAT indices
before returning the index.
- Reject unsafe PAT indices for CPU cached memory (Jia Yao, 2 commits)
Reject incoherent (coh_none) PAT indices for CPU cached memory in
both the madvise ioctl and vm_bind with CPU_ADDR_MIRROR flag, closing
a security gap where the GPU could bypass CPU caches and observe
stale or sensitive data.
- OA improvements for CRI device memory (Ashutosh Dixit, 3 commits)
Move OA buffer access to the xe_map layer to support both system and
device memory (required for CRI), switch OA buffer mmap to use
drm_gem_mmap_obj, and implement workaround Wa_14026633728.
- xe_drm.h documentation fixes (Shuicheng Lin, 6 commits)
Fix multiple documentation issues in the xe_drm.h UAPI header:
typos, spelling errors, grammar, wrong names and references,
kernel-doc cross-reference syntax, and broken code examples.
- kernel-doc syntax fixes in xe headers (Shuicheng Lin, 4 commits)
Fix kernel-doc syntax issues across xe header files: missing '@'
prefixes on member tags, stale/mismatched member tags, comment
syntax errors, and type/parameter name mismatches in references.
- Buffer object and DMA-buf resource leak fixes (Shuicheng Lin, 4 commits)
Fix resource leaks on error paths: DMA-buf attachment leak in
xe_gem_prime_import(), BO leak in xe_dma_buf_init_obj() on
allocation failure, and BO leaks in xe_bo_init_locked() on GGTT
flag validation and unaligned size validation failures.
- Include guard cleanup (Shuicheng Lin, 5 commits)
Fix and standardize include guards across xe header files: normalize
double-underscore guards to single, add missing leading/trailing
underscores, add missing _H suffixes, and add guards to previously
unprotected headers.
- VF CCS memory pool (Satyanarayana K V P, 2 commits)
Switch VF CCS read/write operations from the DRM sub-allocator to
DRM mm, fixing allocation failures in fence-disabled mode where
the sub-allocator's hole cursor assumption breaks. Also introduces
a general BO-backed memory pool with shadow support using drm_mm.
- i915/xe step definition unification (Jani Nikula, 3 commits)
Complete the migration to the shared intel_step header: switch xe
from its own xe_step enum to the shared intel_step naming and
definitions, and update i915 display code to include the common
step header directly.
- Xe3p GT tuning fixes (3 commits)
Three Xe3p GT tuning corrections: fix the register offset for
GAMSTLB_CTRL, stop applying the CCCHKNREG1 tuning from Xe3p onward
(no longer needed), and mark ROW_CHICKEN5 as a masked register.
- Forcewake cleanup in GT and GuC PC (Raag Jadav, 3 commits)
Drop a redundant forcewake reference in xe_gt, reorder forcewake
usage in xe_guc_pc_fini_hw() to avoid a redundant hold, and convert
xe_guc_pc_stop() to void since it can no longer fail.
- SVM garbage collector fix on close (Matthew Brost, 2 commits)
Disable the SVM garbage collector work item when an SVM is closed
to prevent use-after-free when the GC fires after the SVM is freed.
- Admin-only PF mode (Satyanarayana K V P, 2 commits)
Derive an "admin-only PF" mode flag from xe_device state instead of
using a local flag, and restrict device query responses when running
in admin-only PF mode to avoid exposing internal state.
- Enable hwmon energy attributes and accepted power limit for CRI (2 commits)
Enable energy consumption hwmon attributes for the CRI platform and
add support for reading the accepted (sustained) power limit via
hwmon.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/afNSeZJHC3X2m3-N@fedora
Currently, the driver may repeatedly call reinit_completion() during
transfer which contains multiple messages, while another thread is
waiting for the completion.
This happens during transfer with more than 1 message, invoked via
stm32f7_i2c_xfer_core() -> stm32f7_i2c_xfer_msg(). After invoking the
stm32f7_i2c_xfer_msg() to start transfer, stm32f7_i2c_xfer_core()
calls wait_for_completion_timeout() to wait for completion of the
transfer of all messages. When the first message transfer completes,
the hard IRQ handler triggers, and detects transfer completion, which
leads to stm32f7_i2c_isr_event_thread() IRQ thread being started. The
stm32f7_i2c_isr_event_thread() calls stm32f7_i2c_xfer_msg() in case
there are more messages.
Without this change, the second and later stm32f7_i2c_xfer_msg() would
call reinit_completion() on the completion which is still being waited
for in stm32f7_i2c_xfer_core(). Fix this by moving the reinit_completion()
into stm32f7_i2c_xfer_core(), together with wait_for_completion_timeout().
Since stm32f7_i2c_xfer_core() now waits for completion of the entire
transfer, increase the default timeout. This fixes sporadic transfer
timeouts on STM32MP25xx during kernel boot.
Fixes: aeb068c572 ("i2c: i2c-stm32f7: add driver")
Signed-off-by: Marek Vasut <marex@nabladev.com>
[wsa: reworded commit subject]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add the T7 SOC compatible which fallback to AXG compatible.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Currently the code enqueue work items using {queue|mod}_delayed_work(),
using system_long_wq. This workqueue should be used when long works are
expected, but it is a per-cpu workqueue.
This is important because queue_delayed_work() queue the work using:
queue_delayed_work_on(WORK_CPU_UNBOUND, ...);
Note that WORK_CPU_UNBOUND = NR_CPUS.
This would end up calling __queue_delayed_work() that does:
if (housekeeping_enabled(HK_TYPE_TIMER)) {
// [....]
} else {
if (likely(cpu == WORK_CPU_UNBOUND))
add_timer_global(timer);
else
add_timer_on(timer, cpu);
}
So when cpu == WORK_CPU_UNBOUND the timer is global and is
not using a specific CPU. Later, when __queue_work() is called:
if (req_cpu == WORK_CPU_UNBOUND) {
if (wq->flags & WQ_UNBOUND)
cpu = wq_select_unbound_cpu(raw_smp_processor_id());
else
cpu = raw_smp_processor_id();
}
Because the wq is not unbound, it takes the CPU where the timer
fired and enqueue the work on that CPU.
The consequence of all of this is that the work can run anywhere,
depending on where the timer fired.
Recently, a new unbound workqueue specific for long running work has
been added:
c116737e97 ("workqueue: Add system_dfl_long_wq for long unbound works")
So change system_long_wq with system_dfl_long_wq so that the work may
benefit from scheduler task placement.
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
[wsa: remove FIXME as well]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Split the old contents from gpio.h for clarity. Ideally any driver
that still includes linux/gpio.h can now be ported over to use
either linux/gpio/legacy.h or linux/gpio/consumer.h, with the
original file getting removed once that is complete.
No functional changes intended for now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260428154522.2861492-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
If we use the generic GPIO lib for MMIO in the Altera driver
we do not only cut down on the code, we also get get/set_multiple
for free.
Keep the local raw spinlock instead of reusing the bgpio spinlock
because it makes the gpiochip and irqchip nicely orthogonal.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20260427-gpio-mmio-more-v3-3-fe1882351424@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
If the user did not pass a parent in the struct gpio_chip
then use the device used for devres as parent.
This is quite intuitive and can help avoiding having to
assign parent explicitly in every driver using devres
to add the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20260427-gpio-mmio-more-v3-1-fe1882351424@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The YUV24 format is missing an entry in the v4l2_format_info().
The YUV24 format is the packed YUV 4:4:4 formats with 8 bits
per component.
Fixes: 0376a51fbe ("media: v4l: Add packed YUV444 24bpp pixel format")
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The function hantro_run() is declared but never defined nor used, remove
the dangling declaration.
Signed-off-by: Rouven Czerwinski <rouven.czerwinski@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
If V4L2 device fails to register, then SRAM still be claimed and as a
result driver will not be able to probe again.
cedrus 1c0e000.video-codec: Failed to claim SRAM
cedrus 1c0e000.video-codec: Failed to probe hardware
cedrus 1c0e000.video-codec: probe with driver cedrus failed with error -16
cedrus_hw_remove undoes everything that was previously done by
cedrus_hw_probe, such as disabling runtime power management and
releasing the claimed SRAM and reserved memory region.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Fixes: 50e761516f ("media: platform: Add Cedrus VPU decoder driver")
Acked-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
According to the documentation struct v4l2_fh has to be cleaned up with
v4l2_fh_exit() before being freed. [1]
Currently there is no actual bug here, when v4l2_fh_exit() isn't called.
v4l2_fh_exit() in this case only destroys internal mutex. But it may
change in the future, when v4l2_fh_init/v4l2_fh_exit will be enhanced.
1. https://docs.kernel.org/driver-api/media/v4l2-fh.html
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Fixes: 50e761516f ("media: platform: Add Cedrus VPU decoder driver")
Cc: stable@vger.kernel.org
Acked-by: Paul Kocialkowski <paulk@sys-base.io>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
handle_dynamic_resolution change requires that the state_lock be acquired
based on the lockdep_assert_held. However, the
handle_dynamic_resolution_change call in initialize_sequence does not
properly obtain the lock before calling.
Since the v4l2_ctrl_find and s_ctrl can sleep, they should not be called
while a lock is already held. Store off the fbc_buf_count then properly
update control once lock has been freed.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Tested-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Possible use after free if IRQ thread manages to obtain spinlock between
m2m_ctx release and wave5_release function removing stream instance from
list of active instances. The IRQ thread looks for the m2m_ctx which is
freed so null pointer dereference occurs.
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The VDPU383 support for hevc and h264 use structs with bitfields to
represent the SPS and PPS.
Because the fields are mostly unaligned and numerous, it brings compiler
issues, especially with clang.
To prevent that, switch to using the global bitwriter previously
introduced instead.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Currently, the common code files for hevc and h264 use structs with
bitfields to represent the HW RPS buffer.
Because the bitfields are mostly unaligned and numerous, it brings compiler
issues, especially with clang.
To prevent that, switch to using the global bitwriter previously
introduced instead.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Both rkvdec-h264.c and rkvdec-hevc.c use their own bitwriter
function and macros.
Move to using the global one introduced before.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The use of structures with bitfields is good when the values are
somewhat aligned.
More mis-alignement means that compilers need to do more gymnastics
to edit the fields values.
Some cases have been reported with CLang on specific architectures
like armhf and hexagon, where the compiler would allocate a bigger
local stack than needed or even completely freeze during compilation.
Some fixes have been provided to ease the issues, but the real fix
here is to use a bitwriter instead of heavily unaligned bitfields.
This is a preparation commit to provide a global bitwriter interface
for the whole driver.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Some pixel formats can only be produced if the decoder outputs
reference pictures directly. In some cases, such as AV1 film-grain,
the use of the post-processor is strictly required. In this case,
only enumerate the post-processor supported formats. The exception is
when V4L2_FMTDESC_FLAG_ENUM_ALL is set, in this case, we enumerate
everything regardless of the state.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Fixes: bcd4f091cf ("media: verisilicon: Use V4L2_FMTDESC_FLAG_ENUM_ALL flag")
Cc: stable@vger.kernel.org
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In devm_drm_panel_bridge_add() error path the pointer error should be
extracted from dp->plat_data->next_bridge but instead it is extracted
from bridge, which is a valid pointer and not part of this error path.
Extract error pointer from correct variable.
Detected by Smatch:
drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:1489 analogix_dp_bind()
warn: passing a valid pointer to 'PTR_ERR'
Fixes: 1b86a69b61 ("drm/bridge: analogix_dp: Apply panel_bridge helper")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Damon Ding <damon.ding@rock-chips.com>
Link: https://patch.msgid.link/20260429030840.704252-1-ethantidmore06@gmail.com
[Luca: add lkp report lines]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605032334.MuQfn1mP-lkp@intel.com/
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The HT check now only applies in strict mode since APs
were found to be broken. Mark it as such.
Fixes: 711a9c018a ("wifi: mac80211: skip ieee80211_verify_sta_ht_mcs_support check in non-strict mode")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Wave5 encoder is capable of reading in numerous raw pixel formats.
Expose these formats and properly configure encoder if selected.
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Tested-by: Brandon Brnich <b-brnich@ti.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Constrained Baseline Profile (CBP) and Baseline Profile (BP) have been
treated as the same.
Introduce the ability to differentiate between the two.
Fixes: 9707a6254a ("media: chips-media: wave5: Add the v4l2 layer")
Cc: stable@vger.kernel.org
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Tested-by: Brandon Brnich <b-brnich@ti.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Implement V4L2_CID_MPEG_VIDEO_BACKGROUND_DETECTION in the Wave5 encoder
driver. When enabled, the hardware detects background regions in a frame
and uses fewer bits or skip mode to encode them, reducing bitrate for
streams with stationary scenes.
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a generic V4L2 boolean control V4L2_CID_MPEG_VIDEO_BACKGROUND_DETECTION
that allows encoders to detect background regions in a frame and use fewer
bits or skip mode to encode them, potentially reducing bitrate for streams
with stationary scenes.
Signed-off-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nas Chung <nas.chung@chipsnmedia.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
During encoder processing, there is a case where the IRQ response could
return the buffer back to userspace via v4l2_m2m_buf_done call. In this
time, userspace could queue up this same buffer before start_encode removes
the index from the ready queue. This would then lead to a case where the
buffer in the ready queue could be a self loop due to the
WRITE_ONCE(prev->next, new) call in __list_add.
When __list_del is finally called, the loop is already made so nothing
points back to ready queue list head and pointers are poisoned.
A buffer should not be marked as DONE before the buffer is removed from
m2m ready queue. Move removal entirely to finish_encode.
Fixes: 9707a6254a ("media: chips-media: wave5: Add the v4l2 layer")
Cc: stable@vger.kernel.org
Signed-off-by: Brandon Brnich <b-brnich@ti.com>
Tested-by: Jackson Lee <jackson.lee@chipsnmedia.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Since a recent fix the mtk_jpeg_release function cancels any pending
or running work present in the driver workqueue using
cancel_work_sync function.
Currently, only the multicore based variants use this workqueue and they
have the jpeg_worker platform data field initialized with a workqueue
callback function. For the others, this field value remain NULL by
default.
The cancel_work_sync function is unconditionally called in
mtk_jpeg_release function, even for the variants that do not use the
workqueue. This call generates a WARN_ON print in __flush_work because
the workqueue callback function presence check fails in __flush_work
function (used by cancel_work_sync).
So, to avoid these warnings, call cancel_work_sync only if a workqueue
callback is defined in platform data.
Fixes: 34c519feef ("media: mtk-jpeg: fix use-after-free in release path due to uncancelled work")
Cc: stable@vger.kernel.org
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Allwinner video engine sits behind the MBUS that is represented as
an interconnect.
Make sure that the interconnect properties are valid in the binding.
Fixes: d41662e52a ("media: dt-bindings: media: allwinner,sun4i-a10-video-engine: Add R40 compatible")
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Cedrus consumes H.264 ref_pic_list0/ref_pic_list1 entries from the
stateless slice control and later uses their indices to look up
decode->dpb[] in _cedrus_write_ref_list().
Rejecting such controls in cedrus_try_ctrl() would break existing
userspace, since stateless H.264 reference lists may legitimately carry
out-of-range indices for missing references. Instead, guard the actual
DPB lookup in Cedrus and skip entries whose indices do not fit the fixed
V4L2_H264_NUM_DPB_ENTRIES array.
This keeps the fix local to the driver use site and avoids out-of-bounds
reads from malformed or unsupported reference list entries.
Fixes: e000e1fa4b ("media: uapi: h264: Update reference lists")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
HEVC slice parameters are shared stateless V4L2 controls, but the common
validation path does not verify the active L0/L1 reference counts before
driver-specific code consumes them.
The original report came from Cedrus, but the active count bounds are
not Cedrus-specific. Validate them in the common HEVC slice control path
so stateless HEVC drivers get the same basic guarantees as soon as the
control is queued.
Do not reject ref_idx_l0/ref_idx_l1 entries here. Existing userspace may
use out-of-range sentinel values such as 0xff for missing references, and
some hardware can use that information for concealment. Keep this common
check limited to the active reference counts.
Fixes: d395a78db9 ("media: hevc: Add decode params control")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
feature_data is defined as __s16 in the header.
Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
We have to report ENOMEM if no buffer is allocated.
Typo dropped a "!". Restore it.
Fixes: 50acaad3d2 ("media: rc: ttusbir: respect DMA coherency rules")
Cc: stable@vger.kernel.org
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Recursive eventfd wakeups must defer io_uring eventfd signaling because
eventfd_signal_mask() rejects reentry from eventfd wakeup handlers. The
io_ev_fd ops bit tracks an outstanding deferred signal so that the same
rcu_head is not queued twice.
That bit is only set today. Once the first deferred callback runs, later
recursive notifications still see the bit set and skip queueing another
deferred signal. This can leave new completions without a matching
eventfd wake after the first recursive deferral.
Clear the pending bit before issuing the deferred signal. If the wakeup
path recurses while the callback runs, a new signal can be queued for
the next RCU grace period while the current callback keeps its reference
until it returns.
Signed-off-by: Yufan Chen <ericterminal@gmail.com>
Fixes: 60b6c075e8 ("io_uring/eventfd: move to more idiomatic RCU free usage")
Link: https://patch.msgid.link/20260503175710.37209-1-yufan.chen@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IORING_UNREGISTER_NAPI disables NAPI busy polling, but it currently
leaves any previously tracked NAPI IDs on the ring context. The normal
wait path only checks whether the list is empty before entering the busy
poll helper, so an unregistered ring can still observe stale entries and
run an unexpected busy poll pass.
Make unregister switch the context to inactive and free the tracked
entries. Do the same inactive transition while changing the tracking
strategy, and recheck the expected tracking mode under napi_lock before
inserting a newly learned NAPI ID. This prevents a racing poll path from
repopulating the list after unregister or reconfiguration.
Also make the busy poll dispatcher ignore inactive mode explicitly.
Signed-off-by: Yufan Chen <ericterminal@gmail.com>
Fixes: 6bf90bd8c5 ("io_uring/napi: add static napi tracking strategy")
Link: https://patch.msgid.link/20260503175610.35521-1-yufan.chen@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When a CRTC is moved to a different transcoder (e.g. on DP-MST stream
allocation), PIPE_SCANLINE and PIPE_FRMCNT can return values latched
from the previous transcoder/mode for up to one vblank period after
the new pipe is enabled. The vblank evasion code in
intel_pipe_update_start()/end() then samples a stale or boundary
scanline and the frame counter ticks during the critical section,
producing diagnostic errors of the form:
[243.348405] xe 0000:00:02.0: [drm] *ERROR* Atomic update failure on
pipe B (start=300 end=301) time 61 us, min 2128, max 2161, scanline
start 1200, end 2165
[248.536260] xe 0000:00:02.0: [drm] *ERROR* Atomic update failure on
pipe B (start=561 end=562) time 61 us, min 2128, max 2161, scanline
start 2162, end 2167
Here "scanline start 1200" is the vblank_start of a previously
programmed mode on a different transcoder, while "2162" is the current
mode's vblank_start sampled before any real frame has been emitted.
Both indicate a stale read rather than a real evasion miss.
Wait for one vblank after crtc_enable() to give the new transcoder a
chance to start producing live PIPE_SCANLINE/FRMCNT values before any
subsequent atomic commit enters the vblank evasion section. This adds
at most one frame of latency on modeset, which is invisible to users.
Reproduced with igt@kms_rotation_crc@sprite-rotation-180 on a DP-MST
sink; with this patch the failures no longer occur.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Pranay Samala <pranay.samala@intel.com>
Link: https://patch.msgid.link/20260429042650.3335718-1-suraj.kandpal@intel.com
TTM pool shrinking frees pages by calling __free_pages() directly,
which bypasses updates to NR_GPU_ACTIVE and leaves GPU MM accounting
out of sync.
Introduce a helper, __free_pages_gpu_account(), and use it for all page
frees in ttm_pool.c so GPU MM statistics are updated consistently.
Reported-by: Kenneth Crudup <kenny@panix.com>
Fixes: ae80122f38 ("drm/ttm: use gpu mm stats to track gpu memory allocations. (v4)")
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Kenneth Crudup <kenny@panix.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260502065338.2720646-1-matthew.brost@intel.com
The KMS framework uses two slightly different definitions for the state
concept. For a given object (plane, CRTC, encoder, etc., so
drm_$OBJECT_state), the state is the entire state of that object.
However, at the device level, drm_atomic_state refers to a state update
for a limited number of objects.
Thus, drm_atomic_state isn't the entire device state, but only the full
state of some objects in that device. This has been an endless source of
confusion and thus bugs.
We can rename the drm_atomic_state structure to drm_atomic_commit to
make it less confusing.
This patch was created using:
rg -l drm_atomic_state | \
xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g'
mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org
Commit 62e7dd0a39 ("smb: common: change the data type of num_aces
to le16") split struct smb_acl's __le32 num_aces field into __le16
num_aces and __le16 reserved. The reserved field corresponds to Sbz2
in the MS-DTYP ACL wire format, which must be zero [1].
When building an ACL descriptor in build_sec_desc(), we are using a
kmalloc()'ed descriptor buffer and writing the fields explicitly using
le16() writes now. This never writes to the 2 byte reserved field,
leaving it as uninitialized heap data.
When the reserved field happens to contain non-zero slab garbage,
Samba rejects the security descriptor with "ndr_pull_security_descriptor
failed: Range Error", causing chmod to fail with EINVAL.
Change kmalloc() to kzalloc() to ensure the entire buffer is
zero-initialized.
Fixes: 62e7dd0a39 ("smb: common: change the data type of num_aces to le16")
Cc: stable@vger.kernel.org
Signed-off-by: Bjoern Doebel <doebel@amazon.de>
Assisted-by: Kiro:claude-opus-4.6
[1] https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-dtyp/20233ed8-a6c6-4097-aafa-dd545ed24428
Signed-off-by: Steve French <stfrench@microsoft.com>
It is possible that SMB2_open_init may not set lease context based
on the requested oplock level. This can happen when leases have been
temporarily or permanently disabled. When this happens, we will have
open_cached_dir making an open without lease context and the response
will anyway be rejected by open_cached_dir (thereby forcing a close to
discard this open). That's unnecessary two round-trips to the server.
This change adds a check before making the open request to the server
to make sure that SMB2_open_init did add the expected lease context
to the open in open_cached_dir.
Cc: <stable@vger.kernel.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When timer interrupt arrives in guest kernel, guest kernel clears the
timer interrupt and program timer with the next incoming event.
During this stage, timer tick is -1 and timer interrupt status is
disabled in ESTAT register. KVM hypervisor need write zero with timer
tick register and wait timer interrupt injection from HW side, and
then clear timer interrupt.
So there is 2 cycle delay in KVM hypervisor to emulate such scenery,
and the delay is unnecessary if there is no need to clear the timer
interrupt.
Here move 2 cycle delay into timer clear scenery and add timer ESTAT
checking after delay, and set max timer expire value if timer interrupt
does not arrive still.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
With passthrough HW timer, timer interrupt is injected by HW. When
inject emulated CPU interrupt by software such SIP0/SIP1/IPI, HW timer
interrupt may be lost.
Here check whether there is timer tick value inversion before and after
injecting emulated CPU interrupt by software, timer enabling by reading
timer cfg register is skipped. If the timer tick value is detected with
changing, then timer should be enabled. And inject a timer interrupt by
software if there is.
Cc: <stable@vger.kernel.org>
Fixes: f45ad5b8aa ("LoongArch: KVM: Implement vcpu interrupt operations").
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When AVEC interrupt controller is emulated in user space, AVEC interrupt
is injected by software like SIP0/SIP1/TI/IPI interrupts. Here also move
the AVEC interrupt injection in switch loop.
Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
kvm_flush_pte() is the only caller that directly assigns *pte instead
of using the kvm_set_pte() wrapper. Use the wrapper for consistency with
the rest of the file.
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In the ldptr (0x24...0x27) opcode decoding path, the default case only
breaks out but without setting "ret" value to EMULATE_FAIL. This leaves
run->mmio.len uninitialized (stale from a previous MMIO operation) while
"ret" value remains EMULATE_DO_MMIO, causing the code to proceed with an
incorrect MMIO length.
Add "ret = EMULATE_FAIL" to match the other default branches in the same
function (e.g. the 0x28...0x2e and 0x38 cases).
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
