Add the CLK_PLLDSI0_DIV7 and CLK_PLLDSI1_DIV7 fixed-factor clocks to
the r9a09g047 SoC clock driver.
These clocks are required to enable LVDS0 and LVDS1 output support.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/e50c1721e1dc160e8b4518e8c5172f10cba4b58b.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add support for the PLLDSI{0,1} clocks in the r9a09g047 CPG driver.
Introduce CLK_PLLDSI{0,1} also, introduce the
rzg3e_cpg_pll_dsi{0,1}_limits structures to describe the frequency
constraints specific to the RZ/G3E SoC.
On Renesas RZ/G3E:
- PLLDSI0 maximum output frequency: 1218 MHz
- PLLDSI1 maximum output frequency: 609 MHz
These limits are enforced through the newly added
RZG3E_CPG_PLL_DSI{0,1}_LIMITS().
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/d26ec5349b0eb7ddb7d244fc53d1111a8530328f.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add PLLDSI clk mux support to select PLLDSI clock from different clock
sources.
Introduce the DEF_PLLDSI_SMUX() macro to define these muxes and register
them in the clock driver.
Extend the determine_rate callback to calculate and propagate PLL
parameters via rzv2h_get_pll_dtable_pars() when LVDS output is selected,
using a new helper function rzv2h_cpg_plldsi_smux_lvds_determine_rate().
The CLK_SMUX2_DSI{0,1}_CLK clock multiplexers select between two paths
with different duty cycles:
- CDIV7_DSIx_CLK (LVDS path, parent index 0): asymmetric H/L=4/3 duty (4/7)
- CSDIV_DSIx (DSI/RGB path, parent index 1): symmetric 50% duty (1/2)
Implement rzv2h_cpg_plldsi_smux_{get,set}_duty_cycle clock operations to
allow the DRM driver to query and configure the appropriate clock path
based on the required output duty cycle.
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/24d3853ca2522df21e6a071a23e23ba4ca4b7276.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Replace vmwgfx's vblank timer with DRM's common implementation. The
timer handling is almost identical with a few additional bug fixes in
the common code.
Replace most of vmwgfx's vmw_vkms_get_vblank_timestamp() with the
shared helper drm_crtc_vblank_get_vblank_timeout(). The common helper
also works in the presence of delayed vblank timeouts that modify the
vblank counter concurrently.
Set the timeout handler to vmw_vkms_handle_vblank_timeout(). In addition
to handling vblank events, this function also controls CRC generation.
Remove all the hrtimer-related code from vmwgfx. DRM vblank timers
provides this.
v2:
- only cancel vblank timer in CRTC cleanup if vkms_enabled (Zack)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260427150250.699768-4-tzimmermann@suse.de
Decouple vblank handling from the underlying hrtimer. This will be
helpful for replacing vmwgfx's vblank timer with DRM's common
implementation.
The new helper vmw_vkms_handle_vblank_timeout() can later be used as
callback for DRM's handle_vblank call as-is. The helper also keeps the
current semantics for restarting the timer. It returns true to restart
the next vblank timeout even if it could not acquire vmwgfx's vblank
lock.
The remaining code in vmw_vkms_vblank_simulate() will be replaced by
the DRM implementation in a later patch.
v2:
- clarify return-value semantics in commit message (Zack)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260427150250.699768-3-tzimmermann@suse.de
Use the calculated duration of a frame as stored in the vblank state
for the lock-waiting timeout. Decouples the waiting from the details
of the vblank implementation. Both values should be equal.
This will be helpful for replacing vmwgfx's vblank timer with DRM's
common implementation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20260427150250.699768-2-tzimmermann@suse.de
gfs2_qd_dealloc(), called as an RCU callback from gfs2_qd_dispose(),
accesses the superblock object sdp through qd->qd_sbd after freeing qd.
It does so to decrement sd_quota_count and wake up sd_kill_wait.
However, by the time the RCU callback runs, gfs2_put_super() may have
already freed sdp via free_sbd(). This can happen when
gfs2_quota_cleanup() is called during unmount: it disposes of quota
objects via call_rcu() and then waits on sd_kill_wait with a 60-second
timeout. If the timeout expires, or if gfs2_gl_hash_clear() triggers
additional qd_put() calls that schedule more RCU callbacks after the
wait completes, gfs2_put_super() will proceed to free the superblock
while RCU callbacks referencing it are still pending.
Add an rcu_barrier() before free_sbd() in gfs2_put_super() to ensure
all pending RCU callbacks (including gfs2_qd_dealloc) have completed
before the superblock is freed.
Fixes: a475c5dd16 ("gfs2: Free quota data objects synchronously")
Reported-by: syzbot+42a37bf8045847d8f9d2@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=42a37bf8045847d8f9d2
Tested-by: syzbot+42a37bf8045847d8f9d2@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Tristan Madani <tristan@talencesecurity.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Move the conversion from drm_format to vs_format to atomic_check, which
is before the point of no return and can properly bail out.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260331060126.1291966-5-zhengxingda@iscas.ac.cn
The `drm_atomic_helper_check_plane_state()` helper function needs to be
called even if the plane is bound to no CRTCs.
Remove the early return in the primary plane's atomic_check, and use
NULL for crtc_state in this situation.
Fixes: dbf21777ca ("drm: verisilicon: add a driver for Verisilicon display controllers")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260331060126.1291966-4-zhengxingda@iscas.ac.cn
Create a subclass of drm_plane_state to store hardware-specific state
information (e.g. hardware plane format settings) in the future.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260331060126.1291966-3-zhengxingda@iscas.ac.cn
This is for further proper invalid drm_format handling before committing
the plane state change.
The return value is not yet checked yet, and will be checked in
atomic_check in the future.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260331060126.1291966-2-zhengxingda@iscas.ac.cn
Add a new driver for loading binary firmware to configuration
RAM using "SPI passive mode" on Efinix FPGAs.
Efinix passive SPI configuration requires chip select to remain asserted
from reset until the complete bitstream and trailing idle clocks have
been transferred, so the driver keeps CS active with cs_change and locks
the SPI bus for the duration of configuration.
Signed-off-by: Ian Dannapel <iansdannapel@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260416144237.373852-4-iansdannapel@gmail.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Use the return value of scnprintf() to keep track of the current string
length and also replace strlcat() with scnprintf(). Return the string
length directly instead of calling strlen(buf).
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260503101102.298782-2-thorsten.blum@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ts73xx-fpga driver currently only matches by platform device name,
which prevents it from being probed when the device is described in a
device tree. Add an of_device_id table so the driver can match against
the "technologic,ts7300-fpga" compatible string.
The TS-7350 and TS-7390 use different FPGAs with a different programming
interface, so while the driver is named "ts73xx-fpga", it doesn't apply
to them.
Signed-off-by: Phil Pemberton <philpem@philpem.me.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20260409122016.3940462-3-philpem@philpem.me.uk
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Add device tree binding documentation for the Altera Cyclone II FPGA
found on Technologic Systems (now EmbeddedTS) TS-7300 boards, programmed
via the memory-mapped interface in the CPLD.
Signed-off-by: Phil Pemberton <philpem@philpem.me.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260409122016.3940462-2-philpem@philpem.me.uk
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
pattern_write() reports -EFAULT when copy_from_user() fails, but
pattern_read() converts copy_to_user() failures into a zero-length read.
That makes a userspace buffer fault look like EOF instead of reporting the
actual error.
Return -EFAULT from pattern_read() when copying the pattern data to
userspace fails, and update the file offset only after a successful copy.
Fixes: 315a3d57c6 ("ALSA: Implement the new Virtual PCM Test Driver")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260501-alsa-pcmtest-pattern-read-efault-v1-1-53e1e8c11dda@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use a flexible array member to simplify allocation slightly.
Add the header as flexible array members require full definitions.
Remove null check and just kfree. The former is not needed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260430210413.31185-1-rosenp@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The I2C_SMBUS_I2C_BLOCK_DATA case in stub_xfer() uses data->block[0]
as the transfer length. The existing check only clamps it to avoid
overrunning the chip->words[256] register array, but does not validate
it against I2C_SMBUS_BLOCK_MAX (32), which is the limit of the union
i2c_smbus_data.block buffer (34 bytes total). The driver is a
development/test tool (CONFIG_I2C_STUB=m, not built by default)
that must be loaded with a chip_addr= parameter.
A local user with access to /dev/i2c-* can issue an I2C_SMBUS ioctl
with I2C_SMBUS_I2C_BLOCK_DATA and data->block[0] > 32, causing
stub_xfer() to read or write past the end of the union
i2c_smbus_data.block buffer:
BUG: KASAN: stack-out-of-bounds in stub_xfer (drivers/i2c/i2c-stub.c:223)
Read of size 1 at addr ffff88800abcfd92 by task exploit/81
Call Trace:
<TASK>
stub_xfer (drivers/i2c/i2c-stub.c:223)
__i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:593)
i2c_smbus_xfer (drivers/i2c/i2c-core-smbus.c:536)
i2cdev_ioctl_smbus (drivers/i2c/i2c-dev.c:391)
i2cdev_ioctl (drivers/i2c/i2c-dev.c:478)
__x64_sys_ioctl (fs/ioctl.c:583)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
The bug exists because i2c-stub implements .smbus_xfer directly,
bypassing the I2C_SMBUS_BLOCK_MAX validation in
i2c_smbus_xfer_emulated(). The I2C_SMBUS_BLOCK_DATA case in the same
function correctly validates against I2C_SMBUS_BLOCK_MAX, but the
I2C_SMBUS_I2C_BLOCK_DATA case does not.
Fix by rejecting transfers with data->block[0] == 0 or
data->block[0] > I2C_SMBUS_BLOCK_MAX with -EINVAL, consistent with
both the I2C_SMBUS_BLOCK_DATA case in the same function and the
I2C_SMBUS_I2C_BLOCK_DATA validation in i2c_smbus_xfer_emulated().
Fixes: 4710317891 ("i2c-stub: Implement I2C block support")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
... and PCI device helpers.
The various struct pci_device_id arrays were initialized mostly by list
expressions, some of them using the PCI_DEVICE macros. This isn't easily
readable if you're not into PCI. Using named initializers is more
explicit and thus easier to parse. Also use PCI_DEVICE* helper macros to
assign .vendor, .device, .subvendor and .subdevice where appropriate and
skip explicit assignments of 0 (which the compiler takes care of).
The secret plan is to make struct pci_device_id::driver_data an
anonymous union (similar to
https://lore.kernel.org/all/cover.1776579304.git.u.kleine-koenig@baylibre.com/)
and that requires named initializers. But it's also a nice cleanup on
its own.
This change doesn't introduce changes to the compiled pci_device_id
array. Tested on x86 and arm64.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260430135255.279393-2-u.kleine-koenig@baylibre.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since commit d021985504 ("x86/fpu: Improve crypto performance by
making kernel-mode FPU reliably usable in softirqs"), kernel_fpu_begin()
calls fpregs_lock() which uses local_bh_disable() instead of the
previous preempt_disable(). This sets SOFTIRQ_OFFSET in preempt_count
during the entire EFI runtime service call, causing in_interrupt() to
return true in normal task context.
The graceful page fault handler efi_crash_gracefully_on_page_fault()
uses in_interrupt() to bail out for faults in real interrupt context.
With SOFTIRQ_OFFSET now set, the handler always bails out, leaving EFI
firmware page faults unhandled. This escalates to die() which also sees
in_interrupt() as true and calls panic("Fatal exception in interrupt"),
resulting in a hard system freeze. On systems with buggy firmware that
triggers page faults during EFI runtime calls (e.g., accessing unmapped
memory in GetTime()), this causes an unrecoverable hang instead of the
expected graceful EFI_ABORTED recovery.
Fix by replacing in_interrupt() with !in_task(). This preserves the
original intent of bailing for interrupts or NMI faults, while no longer
falsely triggering from the FPU code path's local_bh_disable().
Fixes: d021985504 ("x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
[ardb: Sashiko spotted that using 'in_hardirq() || in_nmi()' leaves a
window where a softirq may be taken before fpregs_lock() is
called, but after efi_rts_work.efi_rts_id has been assigned,
and any page faults occurring in that window will then be
misidentified as having been caused by the firmware. Instead,
use !in_task(), which incorporates in_serving_softirq(). ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The datasheet of lontium-lt8912b doesn't require blanking during
the HFP period. Thus use LP during HFP.
Tested with a samsung-dsim (i.MX8 MM) and a tc358768 DPI to DSI bridge
as the DSI host.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20250728150059.2642055-1-max.oss.09@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Generation of a test pattern output is a useful tool for panel bringup and
debugging, and very simple to support with this chip.
The value of REG_VID_CHA_ACTIVE_LINE_LENGTH_LOW needs to be divided by two
for the test pattern to work in dual LVDS mode. While not clearly stated in
the datasheet, this is needed according to the DSI Tuner [0] output. And
some dual-LVDS panels refuse to show any picture without this division by
two.
[0] https://www.ti.com/tool/DSI-TUNER
Reviewed-by: Louis Chauvet <louis.chauvet@boootlin.com>
Link: https://patch.msgid.link/20260416-ti-sn65dsi83-dual-lvds-fixes-and-test-pattern-v3-1-143886aebc6b@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The GPIO_LINE_DIRECTION_* definitions have just recently been exposed to
gpio consumers.h by breaking them out in a separate defs.h file.
Use this to validate the gpio direction instead of the hard-coded literal.
Signed-off-by: Nikola Z. Ivanov <zlatistiv@gmail.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The VSPD block on the RZ/G3E SoC is identical to the one found on the
RZ/G2L SoC.
No driver changes are required, as `renesas,r9a07g044-vsp2` will be used
as a fallback compatible string on the RZ/G3E SoC.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/c1e2eb36af01e0cddd8050ba70847c3a0821c91e.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The FCPVD block on the RZ/G3E SoC is identical to the one found on the
RZ/G2L SoC.
No driver changes are required, as `renesas,fcpv` will be used as a
fallback compatible string on the RZ/G3E SoC.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/5aaf561a66c24639477a99d3861ca969a81673f0.1775636898.git.tommaso.merciai.xr@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The VSPD block on the RZ/G3L SoC is identical to the one found on the
RZ/G2L SoC. Document RZ/G3L VSPD.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260330105637.130189-1-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The FCPVD block on the RZ/G3L SoC is identical to the one found on the
RZ/G2L SoC. Document RZ/G3L FCPVD IP.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260330110012.131273-1-biju.das.jz@bp.renesas.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
On R-Car X5H, PRR is inside the MFIS memory block, so we need to access
it similar to e.g. RZ/G2L.
Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260402112709.13002-4-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Renesas R-Car MFIS offers multiple features but most importantly
mailboxes and hwspinlocks. Because they share a common register space
and a common register unprotection mechanism, a single driver was chosen
to handle all dependencies. (MFD and auxiliary bus have been tried as
well, but they failed because of circular dependencies.)
In this first step, the driver implements common register access and a
mailbox controller. hwspinlock support will be added incrementally, once
the subsystem allows out-of-directory drivers.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Jassi Brar <jassisinghbrar@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260402112709.13002-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
When request_irq() succeeds but gsc_common_setup() fails later,
the IRQ is never released. Fix this by adding proper error handling
with goto labels to ensure resources are released in LIFO order.
Detected by Smatch:
drivers/parisc/lasi.c:216 lasi_init_chip() warn: 'lasi->gsc_irq.irq'
from request_irq() not released on lines: 207.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202604180957.4QdAIxP6-lkp@intel.com/
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Document the Renesas Multifunctional Interface (MFIS) as found on the
Renesas R-Car X5H (r8a78000) SoC. MFIS includes features like Mailbox/HW
Spinlock/Product Register/Error Injection/Error Detection and the likes.
Family-compatible values are not introduced here because MFIS is usually
very different per SoC.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260402112709.13002-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The return value of kzalloc_flex() is used without
ensuring that the allocation succeeded, and the
pointer is dereferenced unconditionally.
Guard the access to the allocated structure to
avoid a potential NULL pointer dereference if the
allocation fails.
Fixes: 980cd426a2 ("staging: rtl8723bs: replace rtw_zmalloc() with kzalloc()")
Cc: stable <stable@kernel.org>
Signed-off-by: Shyam Sunder Reddy Padira <shyamsunderreddypadira@gmail.com>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://patch.msgid.link/20260414071308.4781-2-shyamsunderreddypadira@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While fuzzing with Syzkaller, a persistent `schedule_timeout: wrong
timeout value` warning was observed, accompanied by SMBus controller
state machine corruption.
The I2C_TIMEOUT ioctl accepts a user-provided timeout in multiples of
10 ms. The user argument is checked against INT_MAX, but it is
subsequently multiplied by 10 before being passed to msecs_to_jiffies().
A malicious user can pass a large value (e.g., 429496729) that passes
the `arg > INT_MAX` check but overflows when multiplied by 10. This
results in a truncated 32-bit unsigned value that bypasses the
internal `(int)m < 0` check in `msecs_to_jiffies()`.
The truncated value is then assigned to `client->adapter->timeout`
(a signed 32-bit int), which is reinterpreted as a negative number.
When passed to wait_for_completion_timeout(), this negative value
undergoes sign extension to a 64-bit unsigned long, triggering the
`schedule_timeout` warning and causing premature returns. This leaves
the SMBus state machine in an unrecoverable state, constituting a
local Denial of Service (DoS).
Fix this by bounding the user argument to `INT_MAX / 10`.
Signed-off-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
[wsa: move the comment as well]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Move generic crtc-ish modeset related functions under a new modeset
sub-struct of struct intel_display. Rename struct intel_display_funcs to
intel_modeset_funcs to make it a little bit more specific. Remove the
funcs sub-struct.
The funcs sub-struct of struct intel_display seems unnecessary. Instead
of display->funcs.FEATURE, prefer display->FEATURE.funcs.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patch.msgid.link/7849de3a5c9755639c179917c6a298de9ac832c0.1777537663.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move cdclk related functions under cdclk sub-struct of struct
intel_display.
The funcs sub-struct of struct intel_display seems unnecessary. Instead
of display->funcs.FEATURE, prefer display->FEATURE.funcs.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patch.msgid.link/a3cadca7cfd03486404af497fa62efb8e2d2adcd.1777537663.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move dpll related functions under dpll sub-struct of struct
intel_display.
The funcs sub-struct of struct intel_display seems unnecessary. Instead
of display->funcs.FEATURE, prefer display->FEATURE.funcs.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patch.msgid.link/02efd924d7efdf42655f5c9bfd0f79a6df5fe2b4.1777537663.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move hotplug irq related functions under hotplug sub-struct of struct
intel_display.
The funcs sub-struct of struct intel_display seems unnecessary. Instead
of display->funcs.FEATURE, prefer display->FEATURE.funcs.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patch.msgid.link/9419cff5038d60a6c95c247b83f54b6559067e0d.1777537663.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move watermark related functions under wm sub-struct of struct
intel_display.
The funcs sub-struct of struct intel_display seems unnecessary. Instead
of display->funcs.FEATURE, prefer display->FEATURE.funcs.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patch.msgid.link/6b74ab66692dce20b2a6a8cb8cfdef222b2983ca.1777537663.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move fdi related functions under fdi sub-struct of struct intel_display.
The funcs sub-struct of struct intel_display seems unnecessary. Instead
of display->funcs.FEATURE, prefer display->FEATURE.funcs.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patch.msgid.link/c48bad63ec94259773d05ef056268b02e119d635.1777537663.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move color related functions under color sub-struct of struct
intel_display.
The funcs sub-struct of struct intel_display seems unnecessary. Instead
of display->funcs.FEATURE, prefer display->FEATURE.funcs.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patch.msgid.link/77cc5dd365f3346c4cbbe7a5d883bca413138c94.1777537663.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move audio related functions under audio sub-struct of struct
intel_display.
The funcs sub-struct of struct intel_display seems unnecessary. Instead
of display->funcs.FEATURE, prefer display->FEATURE.funcs.
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patch.msgid.link/60d626286b77c2faa9ff0518855dd083906b24be.1777537663.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Drop the separate kernel and user macros in favor of calling a single #VC
C handler which multiplexes between the kernel and user #VC entry points
by looking at CS's RPL.
Zap unused DEFINE_IDTENTRY_VC while at it.
There should be no functionality change resulting from this - just code
simplification.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikunj A. Dadhania <nikunj@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Tested-by: Nikunj A. Dadhania <nikunj@amd.com>
Link: https://patch.msgid.link/20260420164352.32129-1-bp@kernel.org
The ELAN0678 touchpad (04F3:3195) found in the Lenovo ThinkPad X13
exhibits excessive smoothing when the I2C bus runs at 400KHz, making
the touchpad feel sluggish when plugged into AC power. This is the
same issue previously fixed for ELAN06FA.
The device's ACPI table (Lenovo TP-R22) specifies 0x00061A80 (400KHz)
for the I2cSerialBusV2 descriptor. Forcing the bus to 100KHz eliminates
the sluggish behavior.
Signed-off-by: Niels Franke <nielsfranke@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[wsa: kept the sorting]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
