mlx5_eswitch_cleanup() calls destroy_workqueue() while holding the
devlink lock through mlx5_uninit_one(). E-Switch workqueue workers also
need the devlink lock, but previously took it before checking whether
their work item was stale. This can deadlock when cleanup waits for a
worker that is blocked on the same devlink lock.
Mode changes have the same ordering hazard: the mode-change path holds
devlink lock while tearing down the current mode, and old work may still
be pending on the E-Switch workqueue.
Fix this by making esw_wq_handler() check the generation counter before
attempting to take devlink lock. The worker uses devl_trylock(); if the
lock is busy and the work is still current, it sleeps on an E-Switch wait
queue with a short timeout. Invalidation increments the generation
counter and wakes the wait queue, so stale workers exit without spinning
or blocking cleanup.
Invalidate work at the earliest safe operation boundary. Cleanup
invalidates before destroy_workqueue(), and QoS cleanup runs after the
workqueue is destroyed. Mode teardown unregisters the work-producing
notifiers first, then invalidates the queue before tearing down
FDB/QoS/rate-node state. This prevents new notifier work from capturing
the new generation while still making old work stale before expensive
teardown starts.
mlx5_devlink_eswitch_mode_set() now relies on
mlx5_eswitch_disable_locked() for the mode-change invalidation instead
of incrementing the generation after disable. mlx5_eswitch_disable()
gets the same coverage. SR-IOV enable/disable paths invalidate before VF
state changes so work against the old VF count or mode is discarded.
Remove the conditional generation increment in
mlx5_eswitch_event_handler_unregister(); mlx5_eswitch_disable_locked()
now handles it unconditionally after the relevant notifiers are
unregistered.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260428051018.219093-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each E-Switch work item requires the same boilerplate: acquire the
devlink lock, check whether the work is stale, dispatch to the
appropriate handler, and release the lock. Factor this out.
Add a func callback to mlx5_host_work so the generic handler
esw_wq_handler() can dispatch to the right function without
duplicating locking logic. Introduce mlx5_esw_add_work() as the
single enqueue point: it stamps the work item with the current
generation counter and queues it onto the E-Switch work queue.
Refactor esw_vfs_changed_event_handler() to match the new contract:
it no longer receives work_gen or out as parameters. It queries
mlx5_esw_query_functions() itself and owns the kvfree() of the
result. The devlink lock is acquired and released by esw_wq_handler()
before dispatching, so the handler runs with the lock already held.
Update mlx5_esw_funcs_changed_handler() to use mlx5_esw_add_work().
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260428051018.219093-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The generation counter in mlx5_esw_functions is used to detect stale
work items on the E-Switch work queue. Move it from mlx5_esw_functions
to the top-level mlx5_eswitch struct so it can guard all work types,
not just function-change events.
This is a mechanical refactor: no behavioral change.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260428051018.219093-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
VMBUS ring buffers must be page aligned. Therefore, the current value of
24K presents a challenge on ARM64 kernels (with 64K pages). So, use
VMBUS_RING_SIZE() to ensure they are always aligned and large enough to
hold all of the relevant data.
Cc: stable@vger.kernel.org
Fixes: 77ffe33363 ("hv_sock: use HV_HYP_PAGE_SIZE for Hyper-V communication")
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260428125339.13963-1-hamzamahfooz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When configuring the link parameters in forced mode for the AQR-105, the
Extended Next Page bit gets advertised for Multi-Gigabit modes.
This is done through bit 12 of MDIO_AN_ADVERTISE in MDIO_MMD_AN. This
contains a copy of the MII_ADVERTISE, for which 802.3 defines bit 12 as
the Extended Next Page advertising. This bit used to be marked as
reserved, but a proper define for it was added in :
commit e7a62edd34 ("net: phy: qcom: at803x: Use the correct bit to disable extended next page")
Let's use it instead of the ADVERTISE_RESV definition, making the code
more self-documenting.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260428125827.238469-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
net: psp: add more validation
Address some AI code-scan issues with the PSP code.
I don't think any of these are real bugs, but they may
become bugs in the future. The two real bugs discovered
were posted separately for net. AI reports 3 more which
seem plain wrong (rx SPI "leak" on error etc.).
====================
Link: https://patch.msgid.link/20260428205352.1247325-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
psp_dev_rcv() is called from the NIC driver's RX completion path
before the frame reaches ip_rcv_core(), so the IP header has not
been validated in SW, yet. We expect that the device has done
all this validation, but let's also add the SW checks, to avoid
surprises.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260428205352.1247325-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In psp_dev_create(), the DEV_ADD_NTF netlink notification is sent
before the device is published to the netdev via rcu_assign_pointer().
IIRC this is intentional because a single PSP device is expected
to be shared with multiple netdevs. So we are trying to default to
not having the netdev info. We can change it if someone complains
but for now just add a comment that it's intentional.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260428205352.1247325-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Code checkers / AI scans will complain that we have already modified
the packet by the time we realize that protocol is not IP.
Move the skb->protocol check to before skb_push()/memmove() so that
the skb is not left in a corrupted state when the function returns
false for an unsupported protocol. psp_dev_rcv() follows similar
pattern.
Today this path is unreachable because both in-tree callers (mlx5 and
netdevsim) only reach psp_dev_encapsulate() from TCP socket TX paths
where skb->protocol is always ETH_P_IP or ETH_P_IPV6, and both drop
the skb on a false return, anyway.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260428205352.1247325-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We had some issues with a suspected traffic imbalance on an RSS
context. Make sure the tests cover the RXFH field selection
vs additional contexts.
Tested-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20260428203624.1224387-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The IPv4/IPv6 and routing code is not very well separated from
the TCP/UDP code. Scope it down properly by providing a more
accurate file list, instead of net/ipv4/ and net/ipv6/
Now that the entry is more accurately representing layer 3
and routing merge in the nexthop entry into it.
Add Ido Schimmel as a co-maintainer, Ido's git history speaks
for itself.
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260428203924.1229169-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Minor clarifications in the README:
- call out what linters we expect to be clean
- make it clear that by "frameworks" we mean code under lib/
not just factoring code out in the same file
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qstats_overlimit_inc() is only used to increment per cpu overlimits.
It can use this_cpu_inc() to avoid this_cpu_ptr() extra cost
and avoid potential store tearing.
Change qstats_overlimit_inc() name and its argument type.
Also add a WRITE_ONCE() in qdisc_qstats_overlimit() to prevent
store tearing.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/0 grow/shrink: 0/7 up/down: 0/-91 (-91)
Function old new delta
tcf_skbmod_act 772 764 -8
tcf_police_act 733 725 -8
tcf_gate_act 318 310 -8
tcf_pedit_act 1295 1284 -11
tcf_mirred_to_dev 1126 1114 -12
tcf_ife_act 1077 1061 -16
tcf_mirred_act 1324 1296 -28
Total: Before=24274627, After=24274536, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260428070919.3109557-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit db359fccf2 ("mm: introduce a new page type for page pool in
page type") added a page_type field to struct net_iov at the same
offset as struct page::page_type, so that page_pool_set_pp_info() can
call __SetPageNetpp() uniformly on both pages and net_iovs.
The page-type API requires the field to hold the UINT_MAX "no type"
sentinel before a type can be set; for real struct page that invariant
is established by the page allocator on free. struct net_iov is not
allocated through the page allocator, so the field is left as zero
(io_uring zcrx, which uses __GFP_ZERO) or as slab garbage (devmem,
which uses kvmalloc_objs() without zeroing). When the page pool then
calls page_pool_set_pp_info() on a freshly-bound niov,
__SetPageNetpp()'s VM_BUG_ON_PAGE(page->page_type != UINT_MAX) fires
and the kernel BUGs. Triggered in selftests by io_uring zcrx setup
through the fbnic queue restart path:
kernel BUG at ./include/linux/page-flags.h:1062!
RIP: 0010:page_pool_set_pp_info (./include/linux/page-flags.h:1062
net/core/page_pool.c:716)
Call Trace:
<TASK>
net_mp_niov_set_page_pool (net/core/page_pool.c:1360)
io_pp_zc_alloc_netmems (io_uring/zcrx.c:1089 io_uring/zcrx.c:1110)
fbnic_fill_bdq (./include/net/page_pool/helpers.h:160
drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:906)
__fbnic_nv_restart (drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2470
drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2874)
fbnic_queue_start (drivers/net/ethernet/meta/fbnic/fbnic_txrx.c:2903)
netdev_rx_queue_reconfig (net/core/netdev_rx_queue.c:137)
__netif_mp_open_rxq (net/core/netdev_rx_queue.c:234)
io_register_zcrx (io_uring/zcrx.c:818 io_uring/zcrx.c:903)
__io_uring_register (io_uring/register.c:931)
__do_sys_io_uring_register (io_uring/register.c:1029)
do_syscall_64 (arch/x86/entry/syscall_64.c:63
arch/x86/entry/syscall_64.c:94)
</TASK>
The same path is reachable through devmem dmabuf binding via
netdev_nl_bind_rx_doit() -> net_devmem_bind_dmabuf_to_queue().
Add a net_iov_init() helper that stamps ->owner, ->type and the
->page_type sentinel, and use it from both the devmem and io_uring
zcrx niov init loops.
Fixes: db359fccf2 ("mm: introduce a new page type for page pool in page type")
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Acked-by: Byungchul Park <byungchul@sk.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20260428025320.853452-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies. Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260427070127.18471-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nft_fwd_neigh can be used in egress chains (NF_NETDEV_EGRESS). When the
forwarding rule targets the same device or two devices forward to each
other, neigh_xmit() triggers dev_queue_xmit() which re-enters
nf_hook_egress(), causing infinite recursion and stack overflow.
Move the nf_get_nf_dup_skb_recursion() accessor and NF_RECURSION_LIMIT
to the shared header nf_dup_netdev.h as a static inline, so that
nft_fwd_netdev can use the recursion counter directly without exported
function call overhead. Guard neigh_xmit() with the same recursion
limit already used in nf_do_netdev_egress().
[ Updated to cache the nf_get_nf_dup_skb_recursion pointer. --pablo ]
Fixes: f87b9464d1 ("netfilter: nft_fwd_netdev: Support egress hook")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ttl field has been decremented already and evaluation of this rule
would proceed, just drop this packet instead if there is no destination
device to forwards this packet. This is exactly what nf_dup already does
in this case.
Moreover, check for headroom and call skb_expand_head() like in the IP
output path to ensure there is sufficient headroom when forwarding this
via neigh_xmit().
Fixes: d32de98ea7 ("netfilter: nft_fwd_netdev: allow to forward packets via neighbour layer")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
skb_try_make_writable() only works on clones and uncloned packets might
have their network header in paged fragments.
nft_fwd needs to work for the ingress and egress hooks, but the egress
hook where skb->data points to the mac header, use skb_network_offset()
to include the mac header. The flowtable is fine since it already uses
the transport offset.
Fixes: d32de98ea7 ("netfilter: nft_fwd_netdev: allow to forward packets via neighbour layer")
Fixes: 7d20868717 ("netfilter: nf_flow_table: move ipv4 offload hook code to nf_flow_table")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
On L1VH, debugfs stats pages are overlay pages: the kernel allocates
them and registers the GPAs with the hypervisor via
HVCALL_MAP_STATS_PAGE2. These overlay mappings persist in the
hypervisor across kexec. If the kexec'd kernel reuses those physical
pages, the hypervisor's overlay semantics cause a machine check
exception.
Fix this by calling mshv_debugfs_exit() from the reboot notifier,
which issues HVCALL_UNMAP_STATS_PAGE for each mapped stats page before
kexec. This releases the overlay bindings so the physical pages can be
safely reused. Guard mshv_debugfs_exit() against being called when
init failed.
Signed-off-by: Jork Loeser <jloeser@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The reboot notifier that tears down the SynIC cpuhp state guards the
cleanup with hv_root_partition(), so on L1VH (where
hv_root_partition() is false) SINT0, SINT5, and SIRBP are never
cleaned up before kexec. The kexec'd kernel then inherits stale
unmasked SINTs and an enabled SIRBP pointing to freed memory.
Remove the hv_root_partition() guard so the cleanup runs for all
parent partitions.
Signed-off-by: Jork Loeser <jloeser@linux.microsoft.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The SynIC is shared between VMBus and MSHV. VMBus owns the message
page (SIMP), event flags page (SIEFP), global enable (SCONTROL),
and SINT2. MSHV adds SINT0, SINT5, and the event ring page (SIRBP).
Currently mshv_synic_cpu_init() redundantly enables SIMP, SIEFP, and
SCONTROL that VMBus already configured, and mshv_synic_cpu_exit()
disables all of them. This is wrong because MSHV can be torn down
while VMBus is still active. In particular, a kexec reboot notifier
tears down MSHV first. Disabling SCONTROL, SIMP, and SIEFP out
from under VMBus causes its later cleanup to write SynIC MSRs while
SynIC is disabled, which the hypervisor does not tolerate.
Restrict MSHV to managing only the resources it owns:
- SINT0, SINT5: mask on cleanup, unmask on init
- SIRBP: enable/disable as before
- SIMP, SIEFP, SCONTROL: leave to VMBus when it is active (L1VH
and nested root partition); on a non-nested root partition VMBus
does not run, so MSHV must enable/disable them
While here, fix the SIEFP and SIRBP memremap() and virt_to_phys()
calls to use HV_HYP_PAGE_SHIFT/HV_HYP_PAGE_SIZE instead of
PAGE_SHIFT/PAGE_SIZE. The hypervisor always uses 4K pages for SynIC
register GPAs regardless of the kernel page size, so using PAGE_SHIFT
produces wrong addresses on ARM64 with 64K pages.
Note that initialization order matters - VMBUS first, MSHV second,
and the reverse on de-init. Ideally, we would want a dedicated SYNIC
driver that replaces the cross-dependencies with a clear API and
dynamic tracking. Such refactor should go into its own dedicated
series, outside of this kexec fix series.
Signed-off-by: Jork Loeser <jloeser@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Reviewed-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The kernel maintains a table of minimum expected microcode revisions for
Intel CPUs in intel-ucode-defs.h. Systems with microcode older than
these revisions are flagged with X86_BUG_OLD_MICROCODE.
The static list of microcode revisions needs to be updated periodically
in response to releases of the official microcode at:
https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files.git.
Introduce a simple script to extract the revision information from the
microcode files and print it in the precise format expected by the
microcode header.
Maintaining the script in the kernel tree ensures a central location
that a submitter can use to generate the kernel-specific update. This
not only reduces the possibility of errors but also makes it easier to
validate the changes for reviewers and maintainers.
Typically, someone at Intel would see a new public release, wait for at
least three months to ensure the update is stable, run this script to
refresh the intel-ucode-defs.h file, and send a patch upstream to update
the mainline and stable versions.
Having a standard update script and a defined process minimizes the
ambiguity when refreshing the old microcode list. As always, there can
be exceptions to this process which should be supported with appropriate
justification.
Originally-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260407014226.1169040-3-sohil.mehta@intel.com
Update the minimum expected revisions of Intel microcode based on the
microcode-20251111 (November 2025) release.
Add an SPDX header as well as a comment to specify that the file is
auto-generated. While at it, remove an extra space before the model
field to match the formatting of the other fields.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260407014226.1169040-2-sohil.mehta@intel.com
Today we skip calling change_conf for negotiates and session setup
requests. This can be a problem for mchan as the immediate next call
after session setup could be due to an I/O that is made on the
mount point. For single channel, this is not a problem as
there will be several calls after setting up session.
This change enforces calling change_conf when the total credits contain
enough for reservations for echoes and oplocks. We expect this to happen
during the last session setup response. This way, echoes and oplocks are
not disabled before the first request to the server. So if that first
request is an open, it does not need to disable requesting leases.
Cc: <stable@vger.kernel.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, smb2_compound_op() allocates
struct smb2_compound_vars *vars using GFP_ATOMIC, although
smb2_compound_op() can sleep when it calls compound_send_recv()
before vars is freed.
Allocate vars using GFP_KERNEL.
Signed-off-by: Fredric Cover <fredric.cover.lkernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Replace the placeholder reference with a description of how Kbuild
generates offset header files such as include/generated/asm-offsets.h.
Remove the corresponding TODO entry now that this is documented.
Signed-off-by: Piyush Patle <piyushpatle228@gmail.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260410221257.191517-1-piyushpatle228@gmail.com
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
strcpy() has been deprecated [1] because it performs no bounds checking
on the destination buffer, which can lead to buffer overflows. While the
current code works correctly, replace strcpy() with the safer strscpy()
to follow secure coding best practices. Use ->body.kvp_register.version
directly as the destination buffer and remove the local variable.
[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Clang warns (or errors with CONFIG_WERROR=y / W=e):
fs/ntfs/runlist.c:755:6: error: variable 'rl' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
755 | if (overflows_type(lowest_vcn, vcn)) {
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
fs/ntfs/runlist.c:971:9: note: uninitialized use occurs here
971 | kvfree(rl);
| ^~
...
rl has not been allocated at this point so the 'goto err_out' should
really just be a return of the error pointer -EIO.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
NTFS could store a filename as paired WIN32 and DOS $FILE_NAME attributes
for directories. But ntfs_delete() deleted both attributes for unlinking
a directory, but it also called drop_nlink() for each attributes.
This could trigger warnings when unlinking directories.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
When Nouveau boots with GSP-RM, it bypasses several traditional code
paths to allow GSP-RM to handle those features. In particular,
some VBIOS parsing is skipped, and a side effect is that the VBIOS
is not exposed in the DRM debugfs entries.
Fix this by updating the drm BIOS struct (nvbios) with the VBIOS data
from the nvkm BIOS struct (nvkm_bios). This happens normally in
NVInitVBIOS(), but that function is skipped when booting with GSP-RM.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://patch.msgid.link/20260428202825.1123719-1-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The driver already assumes little endian in a lot of locations. For
example, all the code that reads RPCs out of the command queue just
directly interprets the bytes.
Make this explicit in Kconfig.
Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Link: https://patch.msgid.link/20260407-fix-kconfig-v2-1-6b4fb06c690c@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Make kvp_register() return an error code instead of silently ignoring
failures, and propagate the error from kvp_handle_handshake() instead of
returning success.
This propagates both kzalloc_obj() and hvutil_transport_send() failures
to kvp_handle_handshake() and thus to kvp_on_msg().
Fixes: 245ba56a52 ("Staging: hv: Implement key/value pair (KVP)")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Long Li <longli@microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
That was missed when importing the header.
Reported-by: Doru Blânzeanu <dblanzeanu@linux.microsoft.com>
Reported-by: Magnus Kulke <magnuskulke@linux.microsoft.com>
Fixes: e68bda71a2 ("hyperv: Add new Hyper-V headers in include/hyperv")
Cc: stable@kernel.org
Reviewed-by: Easwar Hariharan <easwar.hariharan@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
These were the only two allocations in the policy loading logic
that were not already using kzalloc_objs() for the policy
data structures. Fix these to be consistent with the rest and
to protect against ill-formed policy.
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Update the query_esw_functions command to support a new response layout
that can report data for multiple network functions. Setting bit 14 of
the op_mod field selects the v1 layout with network_function_params
entries instead of the legacy host_params_context.
The query_host_net_function_v1 read-only capability indicates firmware
support for layout version 1, and query_host_net_function_num_max
advertises the maximum number of network function entries.
Define a new network_function_params layout and a net_function_params
union that groups host_params_context and network_function_params.
Rework the query_esw_functions output to use a flexible array of this
union, and adjust existing driver callers to use it.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260428053851.220089-5-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Drop the unused host_sf_enable array from
mlx5_ifc_query_esw_functions_out_bits layout. This field has been
deprecated in firmware and is not referenced by the mlx5 driver, so it
can be safely removed.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260428053851.220089-4-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add a function_id_type field to the enable_hca and disable_hca command
input layouts in mlx5_ifc.h to allow using vhca_id as the function index
instead of function_id. The new field support by firmware is indicated
by the function_id_type_vhca_id capability bit, which is already exposed
in hca caps.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260428053851.220089-3-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Rename the vport number enums MLX5_VPORT_PF to MLX5_VPORT_HOST_PF and
MLX5_VPORT_FIRST_VF to MLX5_VPORT_FIRST_HOST_VF to indicate that these
vport indices represent the host PF and its VFs. This prepares the code
for upcoming support of an additional PF type.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260428053851.220089-2-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There currently isn't a max limit an event probe can be. One could make an
event greater than PAGE_SIZE, which makes the event useless because if
it's bigger than the max event that can be recorded into the ring buffer,
then it will never be recorded.
A event probe should never need to be greater than 3K, so make that the
max size. As long as the max is less than the max that can be recorded
onto the ring buffer, it should be fine.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 93ccae7a22 ("tracing/kprobes: Support basic types on dynamic events")
Link: https://patch.msgid.link/20260428122302.706610ba@gandalf.local.home
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
alloc_workqueue_va() forwards its va_list to __alloc_workqueue() which
ultimately feeds vsnprintf(). __alloc_workqueue() already carries
__printf(1, 0); the new wrapper needs the same annotation so format
string checking propagates through the forwarding.
Fixes: 0de4cb473a ("workqueue: fix devm_alloc_workqueue() va_list misuse")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604300347.2LgXyteh-lkp@intel.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
When a driver creates a new MR during rereg_user_mr, a race window
exists between rdma_alloc_commit_uobject() for the new MR and the point
where the code reads that MR to populate the response keys.
A concurrent rereg_mr or destroy_mr could destroy the MR in this window
and cause UAF in the first thread.
Racing flow between two rereg_mr calls:
CPU0 CPU1
---- ----
rereg_user_mr(mr_handle)
uobj_get_write(mr_handle) -> mr0
mr1 = driver→rereg()
rdma_alloc_commit_uobject(mr1)
// mr1 replaced mr0 and is unlocked
uobj_put_destroy(mr0)
rereg_user_mr(mr_handle)
uobj_get_write(mr_handle) -> mr1
mr2 = driver→rereg()
rdma_alloc_commit_uobject(mr2)
// mr2 replaced mr1 and is unlocked
uobj_put_destroy(mr1)
// Destroys mr1!
resp.lkey = mr1->lkey; // UAF - mr1 was freed!
resp.rkey = mr1->rkey; // UAF - mr1 was freed!
Fix by storing lkey/rkey in local variables before the new MR is
unlocked and using the local variables to set the user response.
Fixes: 6e0954b11c ("RDMA/uverbs: Allow drivers to create a new HW object during rereg_mr")
Link: https://patch.msgid.link/r/20260427-security-bug-fixes-v3-4-4621fa52de0e@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Maher Sanalla <msanalla@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When resolving an RDMA-CM IPv6 address, ib_nl_ip_send_msg() sends a
netlink request to the userspace daemon to perform IP-to-GID
resolution in certain cases. The function allocates the netlink message
buffer using nla_total_size(sizeof(size)), which passes 8 bytes (the
size of size_t) instead of 16 bytes (the size of an IPv6 address).
This results in an 8-byte under-allocation.
This is currently masked by nlmsg_new() over-allocation of the skb
in its internal logic. However, the code remains incorrect.
Fix the issue by supplying the proper IPv6 address length to
nla_total_size().
Fixes: ae43f82867 ("IB/core: Add IP to GID netlink offload")
Link: https://patch.msgid.link/r/20260427-security-bug-fixes-v3-3-4621fa52de0e@nvidia.com
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A potential race condition exists between mlx5_core_destroy_dct() and
mlx5_core_create_dct() that can lead to a use-after-free.
After _mlx5_core_destroy_dct() releases the DCT to firmware, the DCTN
can be immediately reallocated for a new DCT being created concurrently.
If the create path stores the new DCT in the xarray before the destroy path
erases it, the destroy will incorrectly delete the new DCT's entry.
Later accesses then hit freed memory.
Fix by replacing the unconditional xa_erase_irq() with xa_cmpxchg_irq()
that only erases the entry if it hasn't already been replaced (still
contains XA_ZERO_ENTRY), preserving any newly created DCT.
Fixes: afff248998 ("RDMA/mlx5: Handle DCT QP logic separately from low level QP interface")
Link: https://patch.msgid.link/r/20260427-security-bug-fixes-v3-2-4621fa52de0e@nvidia.com
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
CRI Wa_14026633728 requires MERTOA buffer to be allocated in device memory,
not system memory (which is the default for OA buffers).
v2: Move WA to xe_device_wa_oob.rules and use XE_DEVICE_WA() (Matt Roper)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260427221133.2500532-4-ashutosh.dixit@intel.com
OA buffer mmap can currently only mmap OA buffer in system memory. CRI
MERTOA buffer can be located in device memory. Switch OA buffer mmap to
using drm_gem_mmap_obj, which can handle mmap's of both system and device
memory buffers.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260427221133.2500532-3-ashutosh.dixit@intel.com
OA code should have used xe_map layer to begin with. In CRI, the OA buffer
can be located both in system and device memory. For these reasons, move OA
code to use the xe_map layer when accessing the OA buffer.
v2: Use xe_map layer and put_user in xe_oa_copy_to_user (Umesh)
v3: To avoid performance impact in v2, revert to v1 but move
xe_map_copy_to_user() to xe_map.h
v4: Use bounce buffer and copy_to_user in xe_oa_copy_to_user
v5: Fix offsets in oa_timestamp() and oa_timestamp_clear() (Umesh)
v6: Rename head/tail in helper args to report_offset (Umesh)
v7: Add xe_assert in xe_oa_copy_to_user (Umesh)
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260427221133.2500532-2-ashutosh.dixit@intel.com
Fix the order in sel_kill_sb() to match other pseudo filesystems.
This does not currently matter for selinuxfs per se but could
in the future, e.g. with SELinux namespaces and multiple selinuxfs
instances.
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
