Much like commit 19f953e743 ("fbdev: fb_pm2fb: Avoid potential divide
by zero error"), we also need to prevent that same crash from happening
in the udlfb driver as it uses pixclock directly when dividing, which
will crash.
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Helge Deller <deller@gmx.de>
Fixes: 59277b679f ("Staging: udlfb: add dynamic modeset support")
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Much like commit 19f953e743 ("fbdev: fb_pm2fb: Avoid potential divide
by zero error"), we also need to prevent that same crash from happening
in the udlfb driver as it uses pixclock directly when dividing, which
will crash.
Cc: Helge Deller <deller@gmx.de>
Assisted-by: gregkh_clanker_t1000
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Even kernels after 2.6 have seq-file support.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260410143234.43610-2-wsa+renesas@sang-engineering.com>
The InterWave PM patch added snd_interwave_restore_regs() and
snd_interwave_restore_memory() as static helpers, but both are used only
from the resume path under CONFIG_PM.
On configurations without CONFIG_PM, such as alpha allyesconfig, this
leaves both helpers unused and triggers -Wunused-function warnings with
W=1.
Move the PM-only helpers into the existing CONFIG_PM section. Keep
__snd_interwave_restore_regs() outside the guard because it is also used
during probe-time initialization.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604101958.x16oNkfo-lkp@intel.com/
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260410-alsa-interwave-pm-warning-fix-v1-1-434d14c9c262@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We introduced the upper bound checks of the packet sizes by the
ep->maxframesize for avoiding the URB submission errors. However, the
check was applied at an incorrect place in the function
snd_usb_endpoint_set_params() where ep->maxframesize isn't defined
yet; the value is defined at a bit later position. So this ended up
with a failure at the first run while the second run works.
For fixing it, move the check at the correct place, right after the
calculation of ep->maxframesize in the same function.
Fixes: 7fe8dec3f6 ("ALSA: usb-audio: Cap the packet size pre-calculations")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221292
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260410143220.1676344-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The WCN39xx family of WiFi/BT chips incorporates a simple PMU, spreading
voltages over internal rails. Implement support for using powersequencer
for this family of QCA devices in addition to using regulators.
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add device coredump support for Scorpious Peak2F product.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add support for Intel Bluetooth Scorpious Peak2F core.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add device coredump support for Scorpious Peak2 product.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add DSBR support for Scorpious Peak2 cores onwards.
Refer commit eb9e749c01 ("Bluetooth: btintel: Allow configuring drive
strength of BRI") for details about DSBR.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add support for Intel Bluetooth Scorpious Peak2 core.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use hardware variant instead of CNVi to send dsbr command.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If FW image has hybrid signature (ECDSA and LMS) then send CSS header,
ECDSA public key, ECDSA signature, LMS public key, LMS signature and
command buffer to device.
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Core 6.0, Vol 3, Part A, 3.4.3:
"... If the payload size of any K-frame exceeds the receiver's MPS, the
receiver shall disconnect the channel..."
This fixes L2CAP/LE/CFC/BV-27-C (running together with 'l2test -r -P
0x0027 -V le_public -I 100').
Signed-off-by: Christian Eggers <ceggers@arri.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
Add MT7902 Bluetooth SDIO support by introducing chip data and
registering the device ID.
Runtime PM is not yet supported by the driver, but normal operation
is unaffected.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add MT7902 device ID and firmware filename to enable MCU firmware
loading.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add SDIO device ID (0x790a) for MediaTek MT7902 to sdio_ids.h.
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use struct_size(), which provides additional compile-time checks for
structures with flexible array members (e.g., __must_be_array()), to
determine the allocation size for a new 'struct hci_drv_rp_read_info'.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add USB device ID (04ca:3807) for a Lite-On Wireless_Device containing
a MediaTek MT7921 (MT7920) Bluetooth chipset found in Acer laptops.
Without this entry, btusb binds via the generic USB class-based wildcard
match but never sets the BTUSB_MEDIATEK flag. This means btmtk never
triggers firmware loading, and the driver sends a raw HCI Reset that
the uninitialized chip cannot respond to, resulting in:
Bluetooth: hci0: Opcode 0x0c03 failed: -110
The information in /sys/kernel/debug/usb/devices about the Bluetooth
device is listed as the below:
T: Bus=03 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#=5 Spd=480 MxCh=0
P: Vendor=04ca ProdID=3807 Rev=1.00
S: Manufacturer=MediaTek Inc.
S: Product=Wireless_Device
S: SerialNumber=000000000
C: #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none)
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Dylan Eray <dylan.eray6@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Replace snprintf("%s", ...) with the faster and more direct strscpy().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The BT core skips calling the hci_dev's shutdown method when the HCI
is unregistered. This means that qca_power_off() was not getting called
leaving BT powered on.
This causes regulators / pwrseq providers to not get disabled which also
causes problem when re-loading the module because regulators and pwrseq
providers have an enablecount which now has never dropped to 0, causing
the BT to not get properly reset between rmmod and re-load which causes
initialization failure on the re-load.
Fix this by calling qca_power_off() from qca_close() when BT has not
already been powered off through a qca_hci_shutdown() call.
hci_ldisc.c will call qca_close() after freeing the hdev, so this
means that qca_power_off() can now no longer deref hu->hdev, change
the logging in qca_power_off() to no longer use hu->hdev.
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The function called qca_power_off() is actually the hci_dev shutdown
handler, rename it to qca_hci_shutdown() to make this clear.
While the qca_power_shutdown() function is actually the counter-part
of qca_power_on() rename it to qca_power_off() to make this clear.
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch adds the device ID for the BCM4343A2 module, found e.g.
in the muRata 1YN WiFi+BT combined device. The required firmware
file is named 'BCM4343A2.hcd'.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Whenever new chipset support is added to the driver code,
we ended up adding chipset name to the last of the switch case
arising code readability issue because of improper sorting of
the chipset names in various places of the code.
Refactor code such a way that new chipset can be added easily
in the code without compromising code readability.
Signed-off-by: Vivek Sahu <vivek.sahu@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a new flag 'BTMTK_FIRMWARE_DL_RETRY'.
If an error occurs during mt79xx firmware download process, this flag
will be set and cleared after a reset. If the flag is already set and
firmware still cannot be loaded successfully after a reset, no further
reset attempts will be made. In other words, if there is a problem during
firmware download, only one reset will be attempted.
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
To prevent abnormal controller states, it is necessary to check
status in another part of the mt79xx firmware setup. During this
process, receiving the 'BTMTK_WMT_PATCH_PROGRESS' status is unexpected.
If this occurs, it should be treated as an error, and driver must be
prevented from continuing execution.
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CXL is linked before fwctl in drivers/Makefile. Both use `module_init, so
`cxl_pci_driver_init()` runs first. When `cxl_pci_probe()` calls
`fwctl_register()` and then `device_add()`, fwctl_class is not yet
registered because fwctl_init() hasn't run, causing `class_to_subsys()` to
return NULL and skip knode_class initialization.
On device removal, `class_to_subsys()` returns non-NULL, and
`device_del()` calls `klist_del()` on the uninitialized knode, triggering
a NULL pointer dereference.
Fixes: 858ce2f56b ("cxl: Add FWCTL support to CXL")
Link: https://patch.msgid.link/r/20260409051902.40218-1-icheng@nvidia.com
Signed-off-by: Richard Cheng <icheng@nvidia.com>
Reviewed-by: Kai-Heng Feng <kaihengf@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If retries are exhausted, driver should not do futher operation.
During mt79xx firmware download process, if the retry count reaches0,
driver will return an -EIO error and release the firmware resources.
Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There is no point in having the label since all it does is return the
value in the 'err' variable. Instead make every goto return directly
and remove the label.
Signed-off-by: Dongyang Jin <jindongyang@kylinos.cn>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Some controller firmwares (eg for MT7925) continuously send invalid ISO
packet, which result to "ISO unknown handle" error spam in logs. It's
not important to show all of them to the user.
Rate limit these ISO error messages, similarly as we do for SCO.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add a con_id parameter to skl_int3472_register_led() to allow callers
to specify both the LED name suffix and lookup con_id instead of
hardcoding "privacy". This prepares for registering additional LED
types with different names.
While at it, rename the privacy LED's GPIO con_id from "privacy-led"
to "privacy" in int3472_get_con_id_and_polarity() and pass it
directly to skl_int3472_register_led(), reducing churn when adding
new LED types.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Link: https://patch.msgid.link/20260401203638.1601661-4-mnencia@kcore.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rename the privacy LED type, struct member, and functions from "pled"
to "led" in preparation for supporting additional LED types beyond
just the privacy LED.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Link: https://patch.msgid.link/20260401203638.1601661-3-mnencia@kcore.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Introduce a local struct int3472_pled pointer in the LED registration,
unregistration, and brightness callback functions to avoid repeatedly
dereferencing int3472->pled. In the brightness callback, use
container_of() to get the int3472_pled struct directly instead of
going through int3472_discrete_device.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Link: https://patch.msgid.link/20260401203638.1601661-2-mnencia@kcore.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
drm_connector_attach_hdr_output_metadata_property() always returns zero,
since drm_object_attach_property() returns void. No caller checks the
return value, so change the return type to void.
Also fix a typo in the kerneldoc ("HDR_OUTPUT_METADA" -> "HDR_OUTPUT_METADATA").
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260330133446.3265938-2-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
This is the Chinese translation subtree for 7.1. It includes
the following changes:
- Add the rust docs translation
- Fix an inconsistent statement in dev-tools/testing-overview
- sync process/2.Process.rst with English version
Above patches are tested by 'make htmldocs'
Signed-off-by: Alex Shi <alexs@kernel.org>
-----BEGIN PGP SIGNATURE-----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=hxBc
-----END PGP SIGNATURE-----
Merge tag 'Chinese-docs-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/alexs/linux into tmp
Chinese translation docs for 7.1
This is the Chinese translation subtree for 7.1. It includes
the following changes:
- Add the rust docs translation
- Fix an inconsistent statement in dev-tools/testing-overview
- sync process/2.Process.rst with English version
Above patches are tested by 'make htmldocs'
Signed-off-by: Alex Shi <alexs@kernel.org>
Currently, foo-sram is allowed, but foo-bar-sram is not.
Allow it so that more complex names aren't unnecessarily simplified.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260409-topic-sram_dtbindings_misc-v2-1-59dc6b0dec45@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
* arm64/for-next/perf:
: Perf updates
perf/arm-cmn: Fix resource_size_t printk specifier in arm_cmn_init_dtc()
perf/arm-cmn: Fix incorrect error check for devm_ioremap()
perf: add NVIDIA Tegra410 C2C PMU
perf: add NVIDIA Tegra410 CPU Memory Latency PMU
perf/arm_cspmu: nvidia: Add Tegra410 PCIE-TGT PMU
perf/arm_cspmu: nvidia: Add Tegra410 PCIE PMU
perf/arm_cspmu: Add arm_cspmu_acpi_dev_get
perf/arm_cspmu: nvidia: Add Tegra410 UCF PMU
perf/arm_cspmu: nvidia: Rename doc to Tegra241
perf/arm-cmn: Stop claiming entire iomem region
arm64: cpufeature: Use pmuv3_implemented() function
arm64: cpufeature: Make PMUVer and PerfMon unsigned
KVM: arm64: Read PMUVer as unsigned
* arm64/for-next/read-once:
: Fixes for __READ_ONCE() with CONFIG_LTO=y
arm64, compiler-context-analysis: Permit alias analysis through __READ_ONCE() with CONFIG_LTO=y
arm64: Optimize __READ_ONCE() with CONFIG_LTO=y
* for-next/misc:
: Miscellaneous cleanups/fixes
arm64: rsi: use linear-map alias for realm config buffer
arm64: Kconfig: fix duplicate word in CMDLINE help text
arm64: mte: Skip TFSR_EL1 checks and barriers in synchronous tag check mode
arm64/hwcap: Generate the KERNEL_HWCAP_ definitions for the hwcaps
arm64: kexec: Remove duplicate allocation for trans_pgd
arm64: mm: Use generic enum pgtable_level
arm64: scs: Remove redundant save/restore of SCS SP on entry to/from EL0
arm64: remove ARCH_INLINE_*
* for-next/tlbflush:
: Refactor the arm64 TLB invalidation API and implementation
arm64: mm: __ptep_set_access_flags must hint correct TTL
arm64: mm: Provide level hint for flush_tlb_page()
arm64: mm: Wrap flush_tlb_page() around __do_flush_tlb_range()
arm64: mm: More flags for __flush_tlb_range()
arm64: mm: Refactor __flush_tlb_range() to take flags
arm64: mm: Refactor flush_tlb_page() to use __tlbi_level_asid()
arm64: mm: Simplify __flush_tlb_range_limit_excess()
arm64: mm: Simplify __TLBI_RANGE_NUM() macro
arm64: mm: Re-implement the __flush_tlb_range_op macro in C
arm64: mm: Inline __TLBI_VADDR_RANGE() into __tlbi_range()
arm64: mm: Push __TLBI_VADDR() into __tlbi_level()
arm64: mm: Implicitly invalidate user ASID based on TLBI operation
arm64: mm: Introduce a C wrapper for by-range TLB invalidation
arm64: mm: Re-implement the __tlbi_level macro as a C function
* for-next/ttbr-macros-cleanup:
: Cleanups of the TTBR1_* macros
arm64/mm: Directly use TTBRx_EL1_CnP
arm64/mm: Directly use TTBRx_EL1_ASID_MASK
arm64/mm: Describe TTBR1_BADDR_4852_OFFSET
* for-next/kselftest:
: arm64 kselftest updates
selftests/arm64: Implement cmpbr_sigill() to hwcap test
* for-next/feat_lsui:
: Futex support using FEAT_LSUI instructions to avoid toggling PAN
arm64: armv8_deprecated: Disable swp emulation when FEAT_LSUI present
arm64: Kconfig: Add support for LSUI
KVM: arm64: Use CAST instruction for swapping guest descriptor
arm64: futex: Support futex with FEAT_LSUI
arm64: futex: Refactor futex atomic operation
KVM: arm64: kselftest: set_id_regs: Add test for FEAT_LSUI
KVM: arm64: Expose FEAT_LSUI to guests
arm64: cpufeature: Add FEAT_LSUI
* for-next/mpam: (40 commits)
: Expose MPAM to user-space via resctrl:
: - Add architecture context-switch and hiding of the feature from KVM.
: - Add interface to allow MPAM to be exposed to user-space using resctrl.
: - Add errata workaoround for some existing platforms.
: - Add documentation for using MPAM and what shape of platforms can use resctrl
arm64: mpam: Add initial MPAM documentation
arm_mpam: Quirk CMN-650's CSU NRDY behaviour
arm_mpam: Add workaround for T241-MPAM-6
arm_mpam: Add workaround for T241-MPAM-4
arm_mpam: Add workaround for T241-MPAM-1
arm_mpam: Add quirk framework
arm_mpam: resctrl: Call resctrl_init() on platforms that can support resctrl
arm64: mpam: Select ARCH_HAS_CPU_RESCTRL
arm_mpam: resctrl: Add empty definitions for assorted resctrl functions
arm_mpam: resctrl: Update the rmid reallocation limit
arm_mpam: resctrl: Add resctrl_arch_rmid_read()
arm_mpam: resctrl: Allow resctrl to allocate monitors
arm_mpam: resctrl: Add support for csu counters
arm_mpam: resctrl: Add monitor initialisation and domain boilerplate
arm_mpam: resctrl: Add kunit test for control format conversions
arm_mpam: resctrl: Add support for 'MB' resource
arm_mpam: resctrl: Wait for cacheinfo to be ready
arm_mpam: resctrl: Add rmid index helpers
arm_mpam: resctrl: Convert to/from MPAMs fixed-point formats
arm_mpam: resctrl: Hide CDP emulation behind CONFIG_EXPERT
...
* for-next/hotplug-batched-tlbi:
: arm64/mm: Enable batched TLB flush in unmap_hotplug_range()
arm64/mm: Reject memory removal that splits a kernel leaf mapping
arm64/mm: Enable batched TLB flush in unmap_hotplug_range()
* for-next/bbml2-fixes:
: Fixes for realm guest and BBML2_NOABORT
arm64: mm: Remove pmd_sect() and pud_sect()
arm64: mm: Handle invalid large leaf mappings correctly
arm64: mm: Fix rodata=full block mapping support for realm guests
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Update ID_AA64SMFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ZFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64FPFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR2_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update SMIDR_EL1 to DDI0601 2025-06
* for-next/generic-entry:
: More arm64 refactoring towards using the generic entry code
arm64: Check DAIF (and PMR) at task-switch time
arm64: entry: Use split preemption logic
arm64: entry: Use irqentry_{enter_from,exit_to}_kernel_mode()
arm64: entry: Consistently prefix arm64-specific wrappers
arm64: entry: Don't preempt with SError or Debug masked
entry: Split preemption from irqentry_exit_to_kernel_mode()
entry: Split kernel mode logic from irqentry_{enter,exit}()
entry: Move irqentry_enter() prototype later
entry: Remove local_irq_{enable,disable}_exit_to_user()
entry: Fix stale comment for irqentry_enter()
* for-next/acpi:
: arm64 ACPI updates
ACPI: AGDI: fix missing newline in error message
In passthrough mode, dm-cache defers write submission until after
metadata commit completes via the invalidate_committed() continuation.
On commit error, invalidate_committed() calls invalidate_complete() to
end the bio and free the migration struct, after which it should return
immediately.
The patch 4ca8b8bd95 ("dm cache: fix write hang in passthrough mode")
omitted this early return, causing execution to fall through into the
success path on error. This results in use-after-free on the migration
struct in the subsequent calls.
Fix by adding the missing return after the invalidate_complete() call.
Fixes: 4ca8b8bd95 ("dm cache: fix write hang in passthrough mode")
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/dm-devel/adjMq6T5RRjv_uxM@stanley.mountain/
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
