Use a signed int for the returned size, because when other options are
dropped, the size can be negative, e.g. to send an echo ADD_ADDR with a
v4 address, and no port.
The behaviour is not changed, because it was working as expected with an
overflow. But it is clearer like this, and it will help later on.
Even if, for the moment, only the ADD_ADDR size can be negative in some
cases, a signed int is now used for all mptcp_established_options_*()
helpers, not to mismatch the type, and as a question of uniformity.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-1-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
George Moussalem says:
====================
IPQ5018: Add and enable GEPHY RX and TX clocks
This patch series addresses a missing hardware description issue for
the Qualcomm IPQ5018 Internal Ethernet PHY, where the data paths fail
to function correctly unless their dedicated RX and TX clocks are
explicitly enabled.
Further testing revealed that leaving these clocks unmanaged by the
kernel, they were inadvertently left enabled by the bootloader / QSDK
platform, which masked the issue. Testing a fresh network configuration
path exposed that the data link fails to work without explicit software
gating.
To correctly introduce the required multi-clock properties, the IPQ5018
binding definition must first be split away from the shared
qca,ar803x.yaml schema. This isolation is required because ar803x
references the generic ethernet-phy.yaml, which enforces a strict
single-clock limit constraint.
- Patch 1: Moves the clocks property and its restriction out of the
generic ethernet-phy.yaml schema to individual bindings files
that need it to allow for PHYs that require multiple clocks.
- Patch 2: Add clocks property to qca,ar803x.yaml for the IPQ5018 PHY.
- Patch 3: Updates the Qualcomm AT803x PHY driver framework to acquire,
enable, and gate these clocks upon link state changes for
runtime power optimization.
====================
Link: https://patch.msgid.link/20260608-ipq5018-gephy-clocks-v4-0-fb2ccd56894b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Further testing revealed that the RX and TX clocks of the IPQ5018 PHY
need to be explicitly enabled. As such, add the required clocks to the
schema.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://patch.msgid.link/20260608-ipq5018-gephy-clocks-v4-2-fb2ccd56894b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The clocks property has a restriction to maximum one.
Yet, some PHYs may require more than 1 clock such as the IPQ5018 PHY
which requires two clocks for RX and TX. As such, increase maxItems to
two.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://patch.msgid.link/20260608-ipq5018-gephy-clocks-v4-1-fb2ccd56894b@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lowpan_nhc_do_uncompression() looks up an NHC descriptor while holding
lowpan_nhc_lock. If the descriptor has no uncompress callback, the error
path drops the lock before printing nhc->name.
lowpan_nhc_del() removes descriptors under the same lock and then relies
on synchronize_net() before the owning module can be unloaded. That only
waits for net RX RCU readers. lowpan_header_decompress() is also exported
and can be reached from callers that are not necessarily covered by the net
core RX critical section, for example the Bluetooth 6LoWPAN L2CAP receive
path.
This leaves a race where one task drops lowpan_nhc_lock in the error path,
another task unregisters and frees the matching descriptor after
synchronize_net() returns, and the first task then dereferences nhc->name
for the warning.
With the post-unlock window widened, KASAN reports:
BUG: KASAN: slab-use-after-free in lowpan_nhc_do_uncompression+0x1f4/0x220
Read of size 8
lowpan_nhc_do_uncompression
lowpan_header_decompress
Fix this by printing the warning before dropping lowpan_nhc_lock, so the
descriptor name is read while unregister is still excluded. The malformed
packet is still rejected with -ENOTSUPP.
Fixes: 92aa7c65d2 ("6lowpan: add generic nhc layer interface")
Cc: stable@vger.kernel.org
Reported-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Reported-by: Yuxiang Yang <yangyx22@mails.tsinghua.edu.cn>
Reported-by: Ao Wang <wangao@seu.edu.cn>
Reported-by: Xuewei Feng <fengxw06@126.com>
Reported-by: Qi Li <qli01@tsinghua.edu.cn>
Reported-by: Ke Xu <xuke@tsinghua.edu.cn>
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://patch.msgid.link/20260609080054.4541-1-zhaoyz24@mails.tsinghua.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CONFIG_GILBARCONAP option has never been defined by the kernel, but
is referred to by drivers/net/ethernet/freescale/fec_main.c. Remove this
reference to eliminate dead code.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260609045200.32606-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PFCP uses dev_get_tstats64() as its ndo_get_stats64 callback, but
pfcp_link_setup() does not request NETDEV_PCPU_STAT_TSTATS. The net
core therefore leaves dev->tstats NULL for PFCP devices.
Creating a PFCP rtnetlink device can immediately ask the new netdev for
stats while building the RTM_NEWLINK notification. That reaches
dev_get_tstats64() and dereferences the NULL dev->tstats pointer.
Set pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS during PFCP link setup so
the net core allocates the storage expected by dev_get_tstats64().
Fixes: 76c8764ef3 ("pfcp: add PFCP module")
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20260609232244.1602027.c569f6c530f6.pfcp-missing-tstats-link-create-oops@trailofbits.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_verify_asconf() and sctp_verify_param() only validate ADD_IP, DEL_IP,
and SET_PRIMARY parameters against a fixed minimum size of sizeof(struct
sctp_addip_param) + sizeof(struct sctp_paramhdr). This ensures the outer
parameter is large enough to contain an embedded address parameter header,
but does not verify that the embedded address parameter's declared length
fits within the bounds of the outer parameter.
Later, sctp_process_param() and sctp_process_asconf_param() extract the
embedded address parameter and pass it to af->from_addr_param(), which uses
the address parameter length to parse the variable-length address payload.
A malformed peer can therefore advertise an embedded address parameter
length that exceeds the remaining bytes in the enclosing parameter.
Validate that addr_param->p.length does not exceed the space available
after the sctp_addip_param header before processing the embedded address
parameter. Reject malformed parameters when the embedded address length
extends beyond the enclosing parameter bounds.
This prevents out-of-bounds reads when parsing malformed parameters carried
in INIT or ASCONF processing paths.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: sashiko <sashiko-bot@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/7838b86b69f52add28808fb59034c8f992e97b2d.1781043268.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mr_table.cache_resolve_queue_len is always updated under
spin_lock_bh(&mfc_unres_lock).
Let's convert it to u32.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609222013.1550355-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ccm_tx_work_expired() re-arms itself via queue_delayed_work() using
the configured exp_interval converted by interval_to_us(). When
exp_interval is BR_CFM_CCM_INTERVAL_NONE or out of range,
interval_to_us() returns 0, causing the worker to fire immediately in
a tight loop that allocates skbs until OOM.
Fix this by validating exp_interval at configuration time:
- Constrain IFLA_BRIDGE_CFM_CC_CONFIG_EXP_INTERVAL to the valid range
[BR_CFM_CCM_INTERVAL_3_3_MS, BR_CFM_CCM_INTERVAL_10_MIN] in the
netlink policy so userspace cannot set an invalid value.
- Reject starting CCM TX in br_cfm_cc_ccm_tx() when exp_interval has
not yet been configured (defaults to 0 from kzalloc).
Fixes: 2be665c394 ("bridge: cfm: Netlink SET configuration Interface.")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609065116.2818837-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
net: fib: Fix two use-after-free in drivers during RCU dump.
syzbot reported fib_info UAF in netdevsim, and the same bug
exists in rocker and mlxsw.
Patch 1 fixes it, and Patch 2 fixes the same type of bug of
fib_rule.
====================
Link: https://patch.msgid.link/20260610061744.2030996-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rocker_router_fib_event() calls fib_rule_get() during RCU dump.
If the fib_rule is dying, refcount_inc() will complain about it.
Let's call refcount_inc_not_zero() in fib_rules_dump().
Fixes: 5d7bfd1419 ("ipv4: fib_rules: Dump FIB rules when registering FIB notifier")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260610061744.2030996-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnx2x_init_one() falls through to the common memory cleanup path for
several failures after probe has already acquired additional resources.
If register_netdev() fails after bnx2x_set_int_mode(), MSI/MSI-X remains
enabled. If later failures happen after bnx2x_iov_init_one(), PF SR-IOV
state can be left allocated. Also, failures after bnx2x_vfpf_acquire()
must release the PF resources before freeing the VF-PF mailbox allocated
by bnx2x_vf_pci_alloc().
Add error labels matching the resource acquisition order so probe failure
disables MSI/MSI-X, removes SR-IOV state, releases VF-PF resources,
deallocates VF PCI resources, and then frees the common driver memory.
Also clear PCI drvdata before freeing the netdev on probe failure.
Cc: stable+noautosel@kernel.org # untested fix to unlikely error path
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260609074610.1968721-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dwc_pcie_rasdes_debugfs_init() returns success when the controller has no
RAS DES capability, leaving pci->debugfs->rasdes_info unset. The common
debugfs teardown path still calls dwc_pcie_rasdes_debugfs_deinit(), which
dereferences rasdes_info unconditionally.
Return early when no RAS DES state was allocated. In that case no RAS DES
mutex was initialized, so there is nothing to destroy.
Fixes: 4fbfa17f9a ("PCI: dwc: Add debugfs based Silicon Debug support for DWC")
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
[mani: reworded subject]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/0f97352506d8d813f70f441de4d63fcd5b7d1c3e.1779123847.git.shuvampandey1@gmail.com
The flow classifier falls back to addr_fold() for fields that are missing
from packet headers. In map mode, userspace controls mask, xor, rshift,
addend and divisor, and can observe the resulting classid through class
statistics. This allows a tc classifier in a user/network namespace to
recover the 32-bit folded value of skb->sk, skb_dst() or skb_nfct().
Align with standard kernel practices for pointer hashing and replace the
XOR folding with a keyed siphash (which is cryptographically secure)
Fixes: e5dfb81518 ("[NET_SCHED]: Add flow classifier")
Reported-by: Kyle Zeng <kylebot@openai.com>
Tested-by: Kyle Zeng <kylebot@openai.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260610101839.14135-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The qca8k dsa switch can use either an external or internal mdio bus.
This depends on whether the mdio node is defined under the switch node
itself. Upon registering the internal mdio bus, the internal_mdio_bus
of the dsa switch is assigned to this bus. When an external mdio bus is
used, the driver still uses the internal_mdio_bus id which is used to
create the device names of the leds.
This leads to the leds being prefixed with '(efault)' as the
internal_mii_bus is null. So let's fix this by adding a null check and
use the devicename of the external bus instead when an external bus is
configured.
Fixes: 1e264f9d29 ("net: dsa: qca8k: add LEDs basic support")
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260608-qca8k-leds-fix-v3-1-a915bb2f37ae@outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-7.1-rc8).
Conflicts:
drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c
f67aead16e ("net: txgbe: rework service event handling")
57d39faed4 ("net: txgbe: improve functions of AML 40G devices")
net/rds/info.c
512db8267b ("rds: mark snapshot pages dirty in rds_info_getsockopt()")
6e94eeb2a2 ("rds: convert to getsockopt_iter")
Adjacent changes:
include/net/sock.h
1ee90b77b7 ("net: guard timestamp cmsgs to real error queue skbs")
f0de88303d ("net: make is_skb_wmem() available to modules")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Three more fixes for the DMA-mapping code, related to PCI P2PDMA, DMA
debug and DMA link ranges API (Li RongQing and Jason Gunthorpe).
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaisf2gAKCRCJp1EFxbsS
RASLAP953EuMof1qqGoMSNpDMIYNO0392Tdqyiq+nm1BwnLWfgEA/Q0m9yVtxbR7
zP/dxo+H95OforpTNJYdEWnXOBaAbwM=
=o0ql
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-7.1-2026-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fix from Marek Szyprowski:
"Three more fixes for the DMA-mapping code, related to PCI P2PDMA, DMA
debug and DMA link ranges API (Li RongQing and Jason Gunthorpe)"
* tag 'dma-mapping-7.1-2026-06-11' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
iommu/dma: Do not try to iommu_map a 0 length region in swiotlb
dma-debug: fix physical address retrieval in debug_dma_sync_sg_for_device
dma-mapping: direct: fix missing mapping for THRU_HOST_BRIDGE segments
Onur has been involved with the Rust for Linux project for a year now. He
works on the Tyr driver for Arm Mali GPUs [1] and has been driving the
`ww_mutex` series and the SRCU abstractions, as well as improving the
core Rust support in several areas.
In addition, he is already a reviewer of the `RUST [SYNC]` entry and has
been involved with upstream Rust -- for instance, he led the bootstrap
team for two years.
His expertise with the language and its toolchain will be very useful to
have around in the future. Thus add him to the `RUST` entry as reviewer.
Link: https://rust-for-linux.com/tyr-gpu-driver [1]
Acked-by: Onur Özkan <work@onurozkan.dev>
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260611055538.61425-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Alexandre has been involved with the Rust for Linux project for more
than a year now. He is one of the main contributors to Nova [1], the
Rust driver for NVIDIA GPUs, and has authored core Rust infrastructure
motivated by that work, such as the `num` module with the `Bounded`
integer type, the `register!` and `bitfield!` macros, as well as
improvements to abstractions like DMA.
He maintains the nova-core driver, as well as the `RUST [NUM]`, `RUST
[BITFIELD]` and `RUST [INTEROP]` entries. In addition, he has been very
active reviewing Rust code in the mailing list.
He also proposed and implemented the `int_lowest_highest_one` feature
in the Rust standard library [2], which we should eventually use in
the kernel.
His experience maintaining a major Rust GPU driver and the abstractions
it needs will be very useful to have around in the future. Thus add him
to the `RUST` entry as reviewer.
Link: https://rust-for-linux.com/nova-gpu-driver [1]
Link: https://github.com/rust-lang/rust/issues/145203 [2]
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260611055538.61425-3-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Tamir has been involved with the Rust for Linux project for more than
a year and a half now. He has been working on improving the integration
between the kernel and the Rust language and tooling: he led the effort
to replace the kernel's own `CStr` type with the standard library's,
and reworked the rust-analyzer integration, among other things.
He is already the maintainer of the `RUST [RUST-ANALYZER]` and `XARRAY API
[RUST]` entries. In addition, he has been active reviewing Rust code in
the mailing list.
He is also a long-time contributor to the upstream Rust project, including
on topics that matter for the Linux kernel [1].
His expertise with the language and its tooling will be very useful to
have around in the future. Thus add him to the `RUST` entry as reviewer.
Link: https://github.com/rust-lang/rust/pull/139994 [1]
Acked-by: Tamir Duberstein <tamird@kernel.org>
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260611055538.61425-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Daniel has been involved with the Rust for Linux project for more than
three years now. He is the lead of the Tyr driver for Arm Mali GPUs
[1] and submitted many of the core abstractions that drivers need: the
`irq` module, system resources, `IoMem`, the regulator API, the `bits`
module, the basic USB abstractions... He is also working on the initial
Rust V4L2 support [2].
He is already a maintainer and reviewer of several Rust-related entries,
and he has been very active reviewing Rust code in the mailing list.
His experience building Rust drivers and the APIs they require will be
very useful to have around in the future. Thus add him to the `RUST`
entry as reviewer.
Link: https://rust-for-linux.com/tyr-gpu-driver [1]
Link: https://lore.kernel.org/rust-for-linux/20250818-v4l2-v1-0-6887e772aac2@collabora.com/ [2]
Acked-by: Daniel Almeida <daniel.almeida@collabora.com>
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260611055538.61425-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The driver accesses the message payload (msg[0]) without checking if
the length is greater than zero. The parent MFD driver can produce a
payload with a length of 0, in which case msg[0] would be uninitialized
or stale.
Add a check to return early if len is less than 1.
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/aintAvTyw4CVb5hG@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver acquires the micro->lock spinlock in process context (in
micro_key_start() and micro_key_stop()) without disabling interrupts.
However, this lock is also acquired in hardirq context by the MFD core
rx handler (micro_rx_msg()) which is called from the serial ISR.
This can lead to a lock inversion deadlock if the interrupt fires on the
same CPU while the process context holds the lock.
Fix this by using guard(spinlock_irq) instead of guard(spinlock) in
micro_key_start() and micro_key_stop() to disable interrupts while
holding the lock.
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/aij-pfaKK-Nna7wf@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When the topology filename contains "dummy" and tplg_cnt is 0, the
function returns -EINVAL directly without freeing the tplg_files
allocated by kcalloc() at line 2497. This leaks memory on every
such topology load attempt.
Fix this by setting ret = -EINVAL and jumping to the out: label,
which already handles the kfree(tplg_files) cleanup.
Fixes: 99c159279c ("ASoC: SOF: don't check the existence of dummy topology")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Dongdong <zhaodongdong@kylinos.cn>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/tencent_3EED6D778DC52C3703A2D1EE8119372E8E08@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
bui duc phuc <phucduc.bui@gmail.com> says:
This series converts mutex and spinlock handling in Mediatek ASoC drivers
to use guard() helpers.
Most patches are straightforward conversions to guard() helpers with no
functional change intended.
One exception is mt8192-afe-gpio, where the mutex release point moves from
immediately before dev_warn() to scope exit. However, the affected path
only emits a warning and immediately returns -EINVAL, without any further
processing.
Compile-tested only.
Link: https://patch.msgid.link/20260610102021.83273-1-phucduc.bui@gmail.com
Clean up the code using guard() for mutex & spin locks.
Merely code refactoring, and no behavior change.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260610102021.83273-9-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the explicit mutex_lock()/mutex_unlock() pair to guard(mutex)
to simplify the locking logic and automatically release the mutex on
all exit paths.
This changes the mutex release point from immediately before dev_warn()
to automatic cleanup at scope exit. However, the affected path only emits
a warning and immediately returns -EINVAL, without any further processing.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260610102021.83273-6-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During randconfig testing, I came across a lot of warnings for the newly
added carryless multiplication function triggering excessive stack usage
from spilling temporary variables to the stack:
lib/crypto/gf128hash.c:166:1: error: stack frame size (1192) exceeds limit (1024) in 'polyval_mul_generic' [-Werror,-Wframe-larger-than]
In addition to the possible risk of overflowing the kernel stack,
the generated object code surely performs very poorly.
This only happens on architectures that don't provide uint128_t
(which should be all 32-bit architectures on modern compilers), but
though I tested random x86 and arm configs, I only saw this with arm's
CONFIG_THUMB2_KERNEL, which adds more pressure to the register allocator.
The testing was done using clang-22, I don't know if gcc has the same
problem. Marking clmul32() as noinline_for_stack experimentally shows
all of the affected builds to completely solve the problem, reducing
the stack usage to a few bytes as expected.
Since u64 arithmetic frequently leads to compilers badly optimizing
32-bit targets, keeping clmul32 out of line is likely to help on
other 32-bit configurations as well when they run into this problem,
though it may also result in a small performance degradation in
configurations that would benefit from inlining.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260611125952.3387258-1-arnd@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
bui duc phuc <phucduc.bui@gmail.com> says:
This series converts spinlock handling in the Rockchip sound drivers
to use guard() helpers.
The changes are code cleanup only and should have no functional impact.
Link: https://patch.msgid.link/20260604033554.96996-1-phucduc.bui@gmail.com
bui duc phuc <phucduc.bui@gmail.com> says:
This series reorders the runtime resume clock enable sequence in the
Rockchip SPDIF and PDM drivers to enable the bus clock before the
functional controller clock.
It also updates the SPDIF DT binding clock descriptions to match the
actual clock usage in the driver.
Additionally, this v2 adds two new patches addressing issues reported
by the Sashiko AI Review tool regarding regcache sync failure handling
and runtime PM resume status validation.
Testing:
- Patch 1: Verified (dt_binding_check passed).
- Patches 2 to 5: Compile tested only. Please help test if you have
the relevant Rockchip hardware.
Link: https://patch.msgid.link/20260602101608.45137-1-phucduc.bui@gmail.com
rockchip_pdm_set_fmt() calls pm_runtime_get_sync() before accessing
hardware registers, but ignores its return value.
If the runtime resume fails, the function continues to perform register
accesses while the device state is undefined.
Replace pm_runtime_get_sync() with pm_runtime_resume_and_get() and
return early on failure to avoid unpowered register accesses.
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260522110302.349421F000E9@smtp.kernel.org/
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260602101608.45137-6-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If regcache_sync() fails during runtime resume, the driver disables the
clocks and returns an error. However, the regmap cache-only mode is left
disabled.
Restore cache-only mode in the error path so subsequent register accesses
continue to use the cache while the device is inactive.
Reported-by: Sashiko AI Review <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260522103713.6C09D1F000E9@smtp.kernel.org/
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260602101608.45137-5-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable the 'hclk' bus clock before the 'clk' controller clock during
runtime resume.
The bus clock provides the register access interface, so enable it before
the controller clock. This also makes the resume sequence the reverse of
the suspend sequence, which keeps the clock ordering consistent.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260602101608.45137-4-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
