Add dt-bindings for the USB3 QMP PHY found on the Qualcomm IPQ5210 SoC. The
IPQ5210 PHY is compatible with the IPQ9574 PHY, so add it as a fallback-
compatible entry using a oneOf construct rather than a plain enum entry.
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608103344.2740174-3-varadarajan.narayanan@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the QUSB2 PHY compatible for the IPQ5210 SoC. The IPQ5210 PHY is
compatible with the IPQ6018 QUSB2 PHY, so allow it to use
qcom,ipq6018-qusb2-phy as the fallback compatible.
Signed-off-by: Varadarajan Narayanan <varadarajan.narayanan@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608103344.2740174-2-varadarajan.narayanan@oss.qualcomm.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Remove IB_QP_RATE_LIMIT from the qp_state_table and instead
pass it through ib_modify_qp_is_ok() unconditionally. This
delegates rate limit attribute validation to the individual
drivers that support it.
As rate limit support expands to additional QP types and transitions
across different vendors, centralizing this policy in the core becomes
impractical. Each driver is better positioned to enforce its own
supported QP types and transitions over non-standard attributes.
Future support for non-standard attributes will be handled per vendor
driver instead of in generic IB core qp_state_table.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-8-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Rate limit transition validation for RC QPs currently relies on
the IB core qp_state_table. Add a driver-level helper to validate
the rate limit attribute directly during QP modify, ensuring it
is only accepted for RC QPs in INIT->RTR, RTR->RTS and RTS->RTS
transitions.
This makes the driver responsible for rate limit validation
and prepares for a follow-up IB core change that delegates
IB_QP_RATE_LIMIT and all future non-standard modify attributes
handling to individual vendor drivers.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-7-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Rate limit transition validation for RC QPs currently relies on
the IB core qp_state_table. Add a driver-level helper to validate
the rate limit attribute directly during QP modify, ensuring it
is only accepted for RC QPs in INIT->RTR, RTR->RTS and RTS->RTS
transitions.
This makes the driver responsible for rate limit validation
and prepares for a follow-up IB core change that delegates
IB_QP_RATE_LIMIT and all future non-standard modify attributes
handling to individual vendor drivers.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-6-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When querying device, report packet pacing capabilities for UD and
UC QPs when device supports it.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-5-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Allow passing a rate limit attribute in modify QP flows even when the
QP is in a state that does not support packet pacing programming in
the lower layers.
When the user sets a rate limit during a QP transition that is not to
RTS, store the value in the mlx5 QP struct and program it to FW when
the QP later transitions to RTS, which is the state that allows
configuring the rate limit index in the QP context.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-4-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Rate limiting is currently supported only for raw packet QPs, where
the packet pacing index is programmed into the SQC during SQ modify.
Extend rate limit support to UD and UC QPs by setting the pacing
index in the QPC during RTR2RTS and RTS2RTS transitions.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-3-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Refactor the raw packet QP modify path to extract rate limit
configuration into a qp_rl_parse() helper that parses user attributes,
and a qp_rl_prepare() helper that handles FW rate limit table
adjustments before the SQ modify itself.
Use qp_rl_commit() to commit changes to QP once FW call
succeeds, and qp_rl_rollback() to rollback changes done to
the FW rate limit table in the prepare stage, in case the
modify operation fails.
These helpers will be reused for extending rate limit support to
additional QP types in the following patch.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-2-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add the needed capabilities in mlx5_ifc to support packet pacing for UC
and UD QPs.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260524-packet-pacing-v1-1-3d79439f8d08@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The mixel_lvds_phy_reset() function pairs pm_runtime_resume_and_get()
with pm_runtime_put(). The asynchronous variant queues a work item
to handle the idle check and potential suspend, which can be cancelled
by a subsequent pm_runtime_disable() call if probe fails after the reset.
Switch to pm_runtime_put_sync() to run the idle check and suspend
synchronously.
Fixes: 06ff622d61 ("phy: freescale: Add i.MX8qm Mixel LVDS PHY support")
Reported-by: sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260605-lvds-v2-1-3ce7539d1104%40gmail.com
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260609-lvds-phy-v1-1-6ad790c6d0ea@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
npc_cn20k_apply_custom_kpu() overwrites KPU profile entries with custom
firmware values and then calls npc_cn20k_update_action_entries_n_flags()
over all entries. Since the same function already ran during default
profile initialisation, entries not overridden by the custom firmware
get their flags translated twice, corrupting the CN20K-specific values.
Fix this by extracting the per-entry translation into a helper
npc_cn20k_translate_action_flags() and calling it as each custom entry
is loaded, removing the redundant batch call at the end.
Fixes: ef992a0f12 ("octeontx2-af: npc: cn20k: MKEX profile support")
Cc: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Nitin Shetty J <nshettyj@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260608095455.1499203-1-nshettyj@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski says:
====================
net: shaper: follow ups to recent fixes
As discussed previously on the patch set with real fixes the xa_locking
in shapers is a little confusing, remove it.
Link: https://lore.kernel.org/20260506000628.1501691-2-kuba@kernel.org
The remaining three patches are an attempt to silence AI reviewers,
I believe Sashiko was complaining about these non-issues. Not adding
Reported tags since these are false positives.
====================
Link: https://patch.msgid.link/20260609183224.1108521-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Various AI scan tools may complain that we don't support resuming
the cap dump. This is true, but the cap dumps are tiny.
net_shaper_nl_cap_pre_dumpit() sets up the dump for just
one device, so the size of the dump scales with NET_SHAPER_SCOPE_MAX (3).
We don't expect them to ever need more than a 4kB page.
Document this.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609183224.1108521-5-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If we fail to insert a node into the XArray in net_shaper_pre_insert()
we can free it directly - it was never visible to the RCU readers.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609183224.1108521-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The shaper insertion and update code takes xa_lock() explicitly.
Paolo explained that the locking was purely to avoid re-taking
the lock in loops. But it may be mis-read as if it was expecting
readers to be fenced off by xa_lock. Readers of XArray are purely
under RCU. Remove explicit taking of xa_lock().
All writers to hierarchy->shapers are serialized by the netdev
instance lock (or run after netdev is made inaccessible to readers).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609183224.1108521-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Rg2q
-----END PGP SIGNATURE-----
Merge tag 'nf-26-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Revalidate bridge ports, add missing NULL checks to fetch the bridge
device by the port. From Florian Westphal.
2) Fix netdevice refcount leak in the error path of nft_fwd hardware
offload function, also from Florian.
3) Unregister helper expectfn callback on conntrack helper module
removal, otherwise dangling pointer remains in place,
from Weiming Shi.
4) Fix possible pointer infoleak in getsockopt() IPT_SO_GET_ENTRIES,
From Kyle Zeng.
5) Validate that device MAC header is present before nf_syslog
accesses it. From Xiang Mei.
6-8) Three patches to address a possible infoleak of stale stack
data in three nf_tables expressions, due to mismatch in the
_init() and _eval() function which is possible since 14fb07130c.
From Davide Ornaghi and Florian Westphal.
netfilter pull request 26-06-10
* tag 'nf-26-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register
netfilter: nft_fib: fix stale stack leak via the OIFNAME register
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
netfilter: nf_log: validate MAC header was set before dumping it
netfilter: x_tables: avoid leaking percpu counter pointers
netfilter: nf_conntrack: destroy stale expectfn expectations on unregister
netfilter: nf_tables_offload: drop device refcount on error
netfilter: revalidate bridge ports
====================
Link: https://patch.msgid.link/20260610161629.214092-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The "invalid position" error occurred when the DMA position descriptor
returned an invalid address value (e.g., pos = -1048838144). This happened
because the `bytes_to_frames()` function returns a signed value, but when
`addr < runtime->dma_addr`, the subtraction produces a negative result that
gets interpreted as a large unsigned integer in comparisons.
when the addr is abnormal, for example,the DMA controller is abnormal in
hardware,x=0 should not be a point(x == runtime->buffer_size),but a range,
which includes the addr address being less than runtime ->dma1-adr, and
the addr exceeding the DMA address range.the value of pos should not better
a negative，return 0, maybe better.
[ 32.834431][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 32.845019][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 32.855588][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 32.866145][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 32.995394][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 33.006025][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
[ 33.016748][ 2] soc-audio soc-audio: invalid position: , pos = -1048838144
Signed-off-by: Li Jun <lijun01@kylinos.cn>
[Remove XRUN reporting I'd mistakenly avised adding on prior review -- broonie]
Link: https://patch.msgid.link/20260611010045.3668574-1-lijun01@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Breno Leitao says:
====================
net: rds: convert rds to getsockopt_iter
This series continues the conversion of the remaining proto_ops getsockopt
callbacks to the new getsockopt_iter callback introduced in commit
67fab22a7a ("net: add getsockopt_iter callback to proto_ops"), this time
for RDS.
RDS is a little more involved than the protocols converted so far, because
the RDS_INFO_* options snapshot kernel state directly into the destination
buffer: the info producers memcpy into the pages under a spinlock via
kmap_atomic() and so must not fault.
The conversion preserves that model — it obtains the same page array and
starting offset from opt->iter_out with iov_iter_extract_pages(),
preallocating the array so the iterator fills it in place, and leaves
the rds_info_iterator / rds_info_copy machinery and all producer
callbacks unchanged; kernel (ITER_KVEC) buffers remain unsupported on
the RDS_INFO path, as before.
I've vibe-coded a kselftest exercising both the simple options and the
RDS_INFO_* snapshot path, feel free to drop it in case this is not
useful.
Signed-off-by: Breno Leitao <leitao@debian.org>
====================
Link: https://patch.msgid.link/20260608-getsock_more-v3-0-706ecf2ea332@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert RDS socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
The RDS_INFO_* snapshot path in rds_info_getsockopt() used to pin the
userspace buffer with pin_user_pages_fast() on the raw optval address;
the info producers then memcpy into those pages under a spinlock via
kmap_atomic() and so must not fault. Obtain the same page array and
starting offset from opt->iter_out with iov_iter_extract_pages(), which
pins for write because iter_out is ITER_DEST.
The page array is preallocated here (sized with iov_iter_npages()) and
passed in, so iov_iter_extract_pages() fills it in place rather than
allocating one for us; RDS therefore keeps ownership of the array on
every return path and frees it itself. The rds_info_iterator /
rds_info_copy machinery and all producer callbacks are unchanged.
Kernel buffers (ITER_KVEC) are not page-backed in a way the info
producers can use, so the RDS_INFO path returns -EOPNOTSUPP for them;
this matches the previous behaviour, where a kernel-buffer getsockopt
hit the WARN_ONCE() path in do_sock_getsockopt() and returned
-EOPNOTSUPP. The simple RDS_RECVERR and SO_RDS_TRANSPORT options keep
working for kernel buffers via copy_to_iter().
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260608-getsock_more-v3-2-706ecf2ea332@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a kselftest that exercises the RDS getsockopt() paths converted to
the getsockopt_iter() / sockopt_t callback:
- RDS_RECVERR and SO_RDS_TRANSPORT, which return their int value through
copy_to_iter() and report the written length in opt->optlen.
- RDS_INFO_*, which obtains the userspace buffer pages with
iov_iter_extract_pages() (including a non-zero starting page offset)
and lets the info producers copy the snapshot in under a spinlock.
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260608-getsock_more-v3-1-706ecf2ea332@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=vhay
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2026-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2026-06-10
1) xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
Propagate SKBFL_SHARED_FRAG when paged fragments are moved between
skbs so ESP can decide whether in-place crypto is safe.
2) xfrm: iptfs: fix use-after-free on first_skb in __input_process_payload
Replace the unlocked read of xtfs->ra_newskb with a local flag so a
concurrent reassembly can no longer free first_skb between
spin_unlock and the post-loop check.
3) xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx()
Prune the inexact bin under xfrm_policy_lock so a concurrent
xfrm_hash_rebuild() can no longer free it before xfrm_policy_kill()
dereferences it.
4) xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
Move hrtimer_cancel() for the output and drop timers ahead of their
spinlocks, breaking the softirq/lock cycle that could deadlock
against the timer callbacks on SMP.
5) xfrm: espintcp: do not reuse an in-progress partial send
Fail a new send when espintcp_push_msgs() returns with emsg->len
still set, so a blocking caller can no longer overwrite ctx->partial
while a previous transfer still owns it.
6) esp: fix page frag reference leak on skb_to_sgvec failure
Add a flag to esp_ssg_unref() to unconditionally unref the source
scatterlist, releasing the old page references that are otherwise
leaked when the second skb_to_sgvec() in esp_output_tail() fails.
Please pull or let me know if there are problems.
ipsec-2026-06-10
* tag 'ipsec-2026-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
esp: fix page frag reference leak on skb_to_sgvec failure
xfrm: espintcp: do not reuse an in-progress partial send
xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx()
xfrm: iptfs: fix use-after-free on first_skb in __input_process_payload
xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
====================
Link: https://patch.msgid.link/20260610140800.2562818-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
addrconf_get_prefix_route() can return the fib6_null_entry sentinel
entry which has a NULL fib6_table pointer. Therefore, before setting the
route's expiration time, check that we are not working with this entry,
as otherwise a NPD will be triggered [1].
Note that the other callers of addrconf_get_prefix_route() are not
susceptible to this bug:
1. addrconf_prefix_rcv(): Requests a route with the 'RTF_ADDRCONF |
RTF_PREFIX_RT' flags which are not set on fib6_null_entry.
2. modify_prefix_route(): Fixed by commit a747e02430 ("ipv6: avoid
possible NULL deref in modify_prefix_route()").
3. __ipv6_ifa_notify(): Calls ip6_del_rt() which specifically checks for
fib6_null_entry and returns an error.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[...]
Call Trace:
<TASK>
__kasan_check_byte (mm/kasan/common.c:573)
lock_acquire.part.0 (kernel/locking/lockdep.c:5842 (discriminator 1))
_raw_spin_lock_bh (kernel/locking/spinlock.c:182 (discriminator 1))
cleanup_prefix_route (net/ipv6/addrconf.c:1280)
ipv6_del_addr (net/ipv6/addrconf.c:1342)
inet6_addr_del.isra.0 (net/ipv6/addrconf.c:3119)
inet6_rtm_deladdr (net/ipv6/addrconf.c:4812)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6997)
netlink_rcv_skb (net/netlink/af_netlink.c:2555)
netlink_unicast (net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1899)
__sock_sendmsg (net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
Fixes: 5eb902b8e7 ("net/ipv6: Remove expired routes with a separated list of routes.")
Reported-by: Ji'an Zhou <eilaimemedsnaimel@gmail.com>
Reviewed-by: David Ahern <dahern@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609145448.768318-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski says:
====================
selftests: drv-net: so_txtime: trivial fixes
I noticed that so_txtime is only passing on NIPA setups which are
looped within a single host. The cross-machine cases just flat out
fail. The initial bug is obvious - the test does not deploy the binary.
But even with that I think more work would be needed to sync the
time / adjust the expectations for a dual-machine test.
Willem promised to follow up on the fundamental issues with 2-host
setups :)
v1: https://lore.kernel.org/20260608173305.372987-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20260609180803.1093428-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test needs more work, and it fails in non-obvious way
when IPv4 connectivity is not available:
# Exception| CMD[remote]: /tmp/vjquwblf/gukinuzqso_txtime -4 -c mono -t 1780939014114542914 -S None -D None a,0 -r
# Exception| EXIT: -15
Explicitly check for IPv4 support to make the future triage
less painful.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609180803.1093428-3-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test seems to be written with a single-host loopback
in mind. We need to deploy the binary to remote before
we run it. This is just fixing an obvious issue, but
more work will be needed to make the dual-host setup
work reliably. Most of the runs still fail with:
FAIL: start time already passed
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609180803.1093428-2-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jiawen Wu says:
====================
net: txgbe: fix module identification
For AML devices, there are some issues where the wrong module
indentified then configure PHY failed.
The module info buffers should be initialized to 0 before the firmware
returns information. And DECLARE_PHY_INTERFACE_MASK() does not guarantee
zeroed contents, so explicitly clear the temporary interface masks before
setting supported interfaces.
Rework txgbe_identify_module() to validate module identifiers through
explicit type checks instead of relying on transceiver_type heuristics.
When using the SFP module, transceiver_type could be a random value,
because it was read from an invalid register.
====================
Link: https://patch.msgid.link/20260608070842.36504-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
DECLARE_PHY_INTERFACE_MASK() does not guarantee zeroed contents. Add a
new macro DECLARE_PHY_INTERFACE_MASK_ZERO(), make the stack variable to
be zeroed before setting supported interfaces.
Fixes: 57d39faed4 ("net: txgbe: improve functions of AML 40G devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260608070842.36504-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rework txgbe_identify_module() to validate module identifiers through
explicit type checks instead of relying on transceiver_type heuristics.
When using the SFP module, transceiver_type could be a random value,
because it was read from an invalid register.
Fixes: 57d39faed4 ("net: txgbe: improve functions of AML 40G devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260608070842.36504-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The module info buffer should be initialized to 0 before the firmware
returns information. Otherwise, there is a risk that the buffer field
not filled by the firmware is random value.
Fixes: 343929799a ("net: txgbe: Support to handle GPIO IRQs for AML devices")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260608070842.36504-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
DB8540 support was removed in commit b6d09f7807 ("pinctrl: nomadik:
Drop U8540/9540 support"), but a couple small pieces of related code
remained in <gpio/gpio-nomadik.h>. Remove them.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260610205007.44881-1-enelsonmoore@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
I.e. from now on it's a boot time requirement for the CPU to support it.
( This was preceded by the removal of all non-CX8 platform build
options, so it should have no functional effects in theory. )
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ahmed S . Darwish <darwi@linutronix.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250425084216.3913608-14-mingo@kernel.org
Now that the Kconfig space always enables CONFIG_X86_TSC (on x86),
remove !CONFIG_X86_TSC code from the x86 arch code.
We still keep the Kconfig option to catch any eventual code still
pending in maintainer or non-mainline trees, plus some drivers
have raw TSC timestamping hacks that use CONFIG_X86_TSC.
It's also still possible to disable TSC support runtime.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ahmed S . Darwish <darwi@linutronix.de>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250425084216.3913608-13-mingo@kernel.org
Change resource declaration using DEFINE_RES_*() macros.
DEFINE_DMA_RES() is for a single dma channel, not a range, so used twice.
Also, some drivers assume IRQ resources are from index 1, so just to stay
uniform, moved IRQ resource at index 1.
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Til Kaiser says:
====================
net: mvpp2: fix XDP RX buffer handling
This is v5 of the earlier XDP_PASS fix. The XDP_PASS change is
retained, and the series also fixes related RX/XDP buffer handling
issues found during review.
Tested with tools/testing/selftests/drivers/net/xdp.py on mvpp2
hardware.
====================
Link: https://patch.msgid.link/20260607134943.21996-1-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When an XDP program uses bpf_xdp_adjust_head() or bpf_xdp_adjust_tail()
and then returns XDP_PASS, mvpp2 still builds the skb from fixed offsets
derived from the original RX descriptor. Packet geometry changes made by
the XDP program are therefore discarded before the skb reaches the stack.
Update rx_offset and rx_bytes from xdp.data and xdp.data_end for
XDP_PASS. This makes skb_reserve() and skb_put() reflect the packet seen
by XDP, and makes RX byte accounting for XDP_PASS follow the length of the
skb passed to the network stack.
Keep a separate rx_sync_size for page-pool recycling on skb allocation
failure, which must stay tied to the received buffer range.
Non-PASS verdicts continue to account the descriptor length because no skb
is passed up in those cases.
Fixes: 07dd0a7aae ("mvpp2: add basic XDP support")
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://patch.msgid.link/20260607134943.21996-5-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RX error path returns the current descriptor buffer to the hardware
BM pool. That is only valid while the driver still owns the buffer.
mvpp2_rx_refill() can fail after the current buffer has been handed to
XDP or attached to an skb. In those cases mvpp2_run_xdp() may have
recycled, redirected, or queued the page for XDP_TX, and an skb free also
retires the data buffer. Returning such a buffer to BM lets hardware DMA
into memory that is no longer owned by the RX ring.
Refill the BM pool before handing the current buffer to XDP or to the
skb. If the allocation fails there, drop the packet and return the
still-owned current buffer to BM, preserving the pool depth. Once the
refill succeeds, later local drops retire/free the current buffer instead
of returning it to BM.
Fixes: 07dd0a7aae ("mvpp2: add basic XDP support")
Fixes: d6526926de ("net: mvpp2: fix memory leak in mvpp2_rx")
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://patch.msgid.link/20260607134943.21996-4-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mvpp2 has short and long BM pools, and short pool buffers can be smaller
than PAGE_SIZE. The XDP path nevertheless initializes every xdp_buff with
PAGE_SIZE as frame size.
XDP helpers use frame_sz to validate tail growth and to derive the hard
end of the data area. Advertising PAGE_SIZE for short buffers can let
bpf_xdp_adjust_tail() grow a packet past the real allocation, corrupting
memory or later tripping skb tailroom checks.
Initialize the XDP buffer with bm_pool->frag_size so XDP tailroom matches
the actual buffer backing the packet.
Fixes: 07dd0a7aae ("mvpp2: add basic XDP support")
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://patch.msgid.link/20260607134943.21996-3-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mvpp2 programs the RX queue packet offset, so hardware writes received
data at dma_addr + MVPP2_SKB_HEADROOM. The current CPU sync starts at
dma_addr and only covers rx_bytes + MVPP2_MH_SIZE bytes, which syncs the
unused headroom and misses the same number of bytes at the packet tail.
On non-coherent DMA systems this can leave the CPU reading stale cache
contents for the end of the received frame.
Use dma_sync_single_range_for_cpu() with MVPP2_SKB_HEADROOM as the range
offset so the sync covers the Marvell header and packet data actually
written by hardware.
Fixes: e1921168bb ("mvpp2: sync only the received frame")
Signed-off-by: Til Kaiser <mail@tk154.de>
Link: https://patch.msgid.link/20260607134943.21996-2-mail@tk154.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Just like for the other two Rust proc macros, remove the artifacts in
`mrproper`.
This should have been part of commit 5060549804 ("rust: zerocopy-derive:
enable support in kbuild").
Link: https://patch.msgid.link/20260610143025.368801-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
