tcp_v6_early_demux() has a single caller : ip6_rcv_finish_core().
Move it to net/ipv6/ip6_input.c and mark it static, for possible
compiler/linker optimizations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260304022706.1062459-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xgene_xfi_mdio_read() prints "write failed" when the MDIO management
interface remains busy and the read times out. Update the message to
"read failed" to match the operation.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260304195755.2468204-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nix_smq_flush_enadis_xoff() compares PF_FUNC values with the FUNC bits
masked off, but one operand applied the mask before extracting PF_FUNC
via TXSCH_MAP_FUNC().
Apply RVU_PFVF_FUNC_MASK after TXSCH_MAP_FUNC() for the TL2 scheduler
queue operand, matching the existing handling of the other operand and
making the comparison consistent and clearer.
No functional change intended.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20260304193950.2467391-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use struct_group() to group the three fields in tcp_out_options that are
read unconditionally by tcp_options_write() and bpf_skops_write_hdr_opt()
(mss, bpf_opt_len, num_sack_blocks), then replace the full-struct memset
with a targeted memset of only that group.
struct tcp_out_options is 40 bytes without MPTCP and 96 bytes with
CONFIG_MPTCP=y (typical distro config). Every remaining field is either
assigned before first use by tcp_established_options()/tcp_syn_options(),
or gated behind its OPTION_* flag in tcp_options_write(). This memset
runs on every transmitted TCP packet, so shrinking it from 96 (or 40)
bytes to 4 bytes reduces per-packet overhead on the hot path.
Assembly comparison (x86-64, GCC 13, CONFIG_MPTCP=y):
Before: rep stos zeroing 96 bytes (5 instructions, 12 8-byte stores)
After: movl $0x0 zeroing 4 bytes (1 instruction, 1 store)
Also add opts->options = 0 at the top of tcp_syn_options(), which
already used |= without a prior clear. tcp_established_options() already
clears opts->options at its top.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Keita Morisaki <kmta1236@gmail.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260304111517.2088694-1-kmta1236@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Realtek RTL8211F-VD has the same LED configuration
and registers as RTL8211F.
Use the existing LED related functions for this chip,
so it is possible to also use the netdev trigger.
Tested on ROCK Pi E.
Signed-off-by: Kryštof Černý <cleverline1mc@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260304-rtl8211fvd-add-leds-v2-1-d50bd8a50f08@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rx_packets should report the number of frames successfully received:
unicast + multicast + broadcast. Subtracting ifOutDiscards (a TX
counter) is incorrect and can undercount RX packets. RX drops are
already reported via rx_dropped (e.g. etherStatsDropEvents), so
there is no need to adjust rx_packets.
This patch removes the subtraction of ifOutDiscards from rx_packets
in rtl8365mb_stats_update().
Link: https://lore.kernel.org/netdev/878777925.105015.1763423928520@mail.yahoo.com/
Fixes: 4af2950c50 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260303-realtek_namiltd_fix2-v1-1-bfa433d3401e@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The functions `[Pin]Init::__[pinned_]init` and `ptr::write` called from
the `init!` macro require the passed pointer to be aligned. This fact is
ensured by the creation of field accessors to previously initialized
fields.
Since we missed this very important fact from the beginning [1],
document it in the code.
Link: https://rust-for-linux.zulipchat.com/#narrow/channel/561532-pin-init/topic/initialized.20field.20accessor.20detection/with/576210658 [1]
Fixes: 90e53c5e70 ("rust: add pin-init API core")
Cc: <stable@vger.kernel.org> # 6.6.y, 6.12.y: 42415d163e: rust: pin-init: add references to previously initialized fields
Cc: <stable@vger.kernel.org> # 6.6.y, 6.12.y, 6.18.y, 6.19.y
Signed-off-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260302140424.4097655-2-lossin@kernel.org
[ Updated Cc: stable@ tags as discussed. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Gary noticed [1] that the initializer macros as well as the `[Pin]Init`
traits cannot support unaligned fields, since they use operations that
require aligned pointers. This means that any code using structs with
unaligned fields in pin-init is unsound.
By default, the `init!` macro generates references to initialized fields,
which makes the compiler check that those fields are aligned. However,
we added the `#[disable_initialized_field_access]` attribute to avoid
this behavior in commit ceca298c53 ("rust: pin-init: internal: init:
add escape hatch for referencing initialized fields"). Thus remove the
`#[disable_initialized_field_access]` attribute from `init!`, which is
the only safe way to create an initializer handling unaligned fields.
If support for in-place initializing structs with unaligned fields is
required in the future, we could figure out a solution. This is tracked
in [2].
Reported-by: Gary Guo <gary@garyguo.net>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/561532-pin-init/topic/initialized.20field.20accessor.20detection/with/576210658 [1]
Link: https://github.com/Rust-for-Linux/pin-init/issues/112 [2]
Fixes: ceca298c53 ("rust: pin-init: internal: init: add escape hatch for referencing initialized fields")
Signed-off-by: Benno Lossin <lossin@kernel.org>
Acked-by: Janne Grunau <j@jannau.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260302140424.4097655-1-lossin@kernel.org
[ Adjusted tags and reworded as discussed. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When building with an out directory (O=), absolute paths can end up in the
file name in `#[track_caller]` or the panic message. This is not desirable
as this leaks the exact path being used to build the kernel and means that
the same location can appear in two forms (relative or absolute).
This is reported by Asahi [1] and is being workaround in [2] previously to
force everything to be absolute path. Using absolute path for everything
solves the inconsistency, however it does not address the reproducibility
issue. So, fix this by remap all absolute paths to srctree to relative path
instead.
This is previously attempted in commit dbdffaf50f ("kbuild, rust: use
-fremap-path-prefix to make paths relative") but that was reverted as
remapping debug info causes some tool (e.g. objdump) to be unable to find
sources. Therefore, use `--remap-path-scope` to only remap macros but leave
debuginfo untouched. `--remap-path-scope` is only stable in Rust 1.95, so
use `rustc-option` to detect its presence. This feature has been available
as `-Zremap-path-scope` for all versions that we support; however due to
bugs in the Rust compiler, it does not work reliably until 1.94. I opted to
not enable it for 1.94 as it's just a single version that we missed.
This change can be validated by building a kernel with O=, strip debug info
on vmlinux, and then check if the absolute path exists in `strings
vmlinux`, e.g. `strings vmlinux |grep \/home`.
Reported-by: Janne Grunau <j@jannau.net>
Reported-by: Asahi Lina <lina+kernel@asahilina.net>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/288089-General/topic/Per-call-site.20data.20and.20lock.20class.20keys/near/572466559 [1]
Link: 54ab888788 [2]
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Nicolas Schier <nsc@kernel.org> # kbuild
Link: https://patch.msgid.link/20260226152112.3222886-1-gary@kernel.org
[ Reworded for few typos. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Enable drivers commonly used for these boards.
- CONFIG_*TWL*: PMIC mostly used on these devices so enable all functions.
Especially charging is required to avoid having battery drained.
- missing SoC functions (watchdog, thermal, sound)
- TI WiLink chipset support to provide WLAN for
- GTA04A5, Pandaboards, OpenPandora, Moverio BT200
- HCILL to provide Bluetooth on boards with TI WiLink
combo chips
- TCA6507 LEDs: some are used as GPIO os GTA04A4 to provide
Power.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Link: https://patch.msgid.link/20260220184336.616623-1-andreas@kemnade.info
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
After commit 295d8398c6 ("kbuild: specify output names separately for
each emission type from rustc"), the preferred pattern is to ask rustc to
emit dependency information into $(depfile) directly, and after commit
2185242fad ("kbuild: remove sed commands after rustc rules"), the
post-processing to remove comments is no longer necessary as fixdep can
handle comments directly. Thus, emit dep-info into $(depfile) directly and
remove the mv and sed invocation.
This fixes the issue where a non-ignored .d file is emitted during
compilation and removed shortly afterwards.
[ Like Gary mentioned in Zulip, this likely happened due to rebasing
the builds part of the old `syn` work I had. - Miguel ]
Reported-by: Onur Özkan <work@onurozkan.dev>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/288089-General/topic/syn.20artifact.20being.20tracked.20by.20git/with/575467879
Fixes: 7dbe46c0b1 ("rust: kbuild: add proc macro library support")
Signed-off-by: Gary Guo <gary@garyguo.net>
Tested-by: Onur Özkan <work@onurozkan.dev>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260224072957.214979-1-gary@garyguo.net
[ Reworded for a couple of typos. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Use the correct struct member names to avoid kernel-doc warnings:
Warning: include/linux/platform_data/voltage-omap.h:27 struct member
'volt_nominal' not described in 'omap_volt_data'
Warning: include/linux/platform_data/voltage-omap.h:27 struct member
'vp_errgain' not described in 'omap_volt_data'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260226051309.556228-1-rdunlap@infradead.org
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Replace scnprintf("%s", ...) with the faster and more direct strscpy().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260224144552.585272-1-thorsten.blum@linux.dev
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Enable the ITE IT66121 HDMI bridge driver to support HDMI output on
the BeagleBone Green with the Seeed Studio HDMI cape.
Enable CONFIG_DRM_TILCDC as a module on multi_v7_defconfig to provide
display support for TI AM335x-based SoCs in this kernel configuration.
Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260216-feature_bbge-v2-2-22805cfdbf62@bootlin.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
PVC supports GT error reporting via vector registers along with
error status register. Add support to report these errors and
update respective counters. Incase of Subslice error reported
by vector register, process the error status register
for applicable bits.
The counter is embedded in the xe drm ras structure and is
exposed to the userspace using the drm_ras generic netlink
interface.
$ sudo ynl --family drm_ras --do get-error-counter \
--json '{"node-id":0, "error-id":1}'
{'error-id': 1, 'error-name': 'core-compute', 'error-value': 0}
Co-developed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260304074412.464435-11-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Introduces the DRM RAS infrastructure over generic netlink.
The new interface allows drivers to expose RAS nodes and their
associated error counters to userspace in a structured and extensible
way. Each drm_ras node can register its own set of error counters, which
are then discoverable and queryable through netlink operations. This
lays the groundwork for reporting and managing hardware error states
in a unified manner across different DRM drivers.
Currently it only supports error-counter nodes. But it can be
extended later.
The registration is also not tied to any drm node, so it can be
used by accel devices as well.
It uses the new and mandatory YAML description format stored in
Documentation/netlink/specs/. This forces a single generic netlink
family namespace for the entire drm: "drm-ras".
But multiple-endpoints are supported within the single family.
Any modification to this API needs to be applied to
Documentation/netlink/specs/drm_ras.yaml before regenerating the
code:
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml --mode uapi --header \
-o include/uapi/drm/drm_ras.h
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml --mode kernel \
--header -o drivers/gpu/drm/drm_ras_nl.h
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml \
--mode kernel --source -o drivers/gpu/drm/drm_ras_nl.c
Cc: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: netdev@vger.kernel.org
Co-developed-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260304074412.464435-8-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Allow overlays to be applied to am335x BeagleBoard boards. This adds
around ~40% to the total size of the DTB files on average.
Signed-off-by: Kory Maincent (TI) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260216-feature_bbge-v2-1-22805cfdbf62@bootlin.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Create a device tree for the 10 inch variants (P5100, P5110, P5113)
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260303203017.511-9-bavishimithil@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Create a device tree for the 7 inch variants (P3100, P3110, P3113)
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260303203017.511-8-bavishimithil@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add samsung-espresso7 codename for the 7 inch variant
Add samsung-espresso10 codename for the 10 inch variant
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260303203017.511-7-bavishimithil@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Create common device tree for Samsung Espresso series devices
Create a shared device tree for all variants first.
Device-specific trees will be added later based on screen size.
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260303203017.511-6-bavishimithil@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The LTN070NL01 is a 7.0 inch 1024x600, 24 bit, VESA Compatible, TFT
display panel
The LTN101AL03 is a 10.1 inch 800x1280, 24 bit, VESA Compatible, TFT
display panel
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20260303203017.511-5-bavishimithil@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add a dedicated DTS file for the TWL6032 PMIC (Phoenix Lite). Already
has driver support with TWL6030 (Phoenix) since both of them are so
similar, some nodes can be reused from TWL6030 as well
This can be included in the board files like twl6030
Example:
...
&i2c1 {
twl: twl@48 {
reg = <0x48>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
interrupt-parent = <&gic>;
};
};
/include/ "twl6032.dtsi"
...
Used in devices like samsung-espresso, amazon-jem, epson-embt2ws etc
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Reviewed-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260303203017.511-2-bavishimithil@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
platform_get_irq_byname() will return a negative value if an error
happens, so it should be checked and not just passed directly into
devm_request_threaded_irq() hoping all will be ok.
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Maíra Canal <mcanal@igalia.com>
Cc: Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022339-cornflake-t-shirt-2471@gregkh
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The hardware revision for TSMC 3nm-based Qualcomm SOCs should be 7.2,
this can be confirmed from REG_DSI_7nm_PHY_CMN_REVISION_ID0, the value
is 0x27, which means hardware revision is 7.2
No functional change.
Fixes: 1337d7ebfb ("drm/msm/dsi/phy: Add support for SM8750")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/707414/
Link: https://lore.kernel.org/r/20260226122958.22555-2-mitltlatltl@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The Glymur platform has four DisplayPort controllers. The hardware
supports four streams (MST) per controller. However, on Glymur the first
three controllers only have two streams wired to the display subsystem,
while the fourth controller operates in single-stream mode.
Add a dedicated clause for the Glymur compatible to require the register
ranges for all four stream blocks, while allowing either one pixel clock
(for the single-stream controller) or two pixel clocks (for the remaining
controllers).
Update the Glymur MDSS schema example by adding the missing p2, p3,
mst2link and mst3link register blocks. Without these, the bindings
validation fails. Also replace the made-up register addresses with the
actual addresses from the first controller to match the SoC devicetree
description.
Cc: stable@vger.kernel.org # v6.19
Fixes: 8f63bf9082 ("dt-bindings: display: msm: Document the Glymur DiplayPort controller")
Fixes: 1aee577bbc ("dt-bindings: display: msm: Document the Glymur Mobile Display SubSystem")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/708518/
Link: https://lore.kernel.org/r/20260303-glymur-fix-dp-bindings-reg-clocks-v4-1-1ebd9c7c2cee@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Andrey Grodzovsky says:
====================
Optimize kprobe.session attachment for exact function names
When libbpf attaches kprobe.session programs with exact function names
(the common case: SEC("kprobe.session/vfs_read")), the current code path
has two independent performance bottlenecks:
1. Userspace (libbpf): attach_kprobe_session() always parses
/proc/kallsyms to resolve function names, even when the name is exact
(no wildcards). This takes ~150ms per function.
2. Kernel (ftrace): ftrace_lookup_symbols() does a full O(N) linear scan
over ~200K kernel symbols via kallsyms_on_each_symbol(), decompressing
every symbol name, even when resolving a single symbol (cnt == 1).
This series optimizes libbpf side: libbpf detects exact function names
(no wildcards) in bpf_program__attach_kprobe_multi_opts() and bypasses
kallsyms parsing, passing the symbol directly to the kernel via syms[]
array. ESRCH is normalized to ENOENT for API consistency.
Selftests validates exact-name attachment via kprobe_multi_session.c
and error consistency between wildcard and exact paths
in test_attach_api_fails.
Changes since v3 [3]:
- Skip fast path when unique_match is set (Jiri Olsa, CI bot)
Changes since v2 [2]:
- Use if/else-if instead of goto (Jiri Olsa)
- Use syms = &pattern directly (Jiri Olsa)
- Drop unneeded pattern = NULL (Jiri Olsa)
- Revert cosmetic rename in attach_kprobe_session (Jiri Olsa)
- Remove "module symbols" from ftrace comment (CI bot)
Changes since v1 [1]:
- Move optimization into attach_kprobe_multi_opts (Jiri Olsa)
- Use ftrace_location as boolean check only (Jiri Olsa)
- Remove verbose perf rationale from comment (Steven Rostedt)
- Consolidate tests into existing subtests (Jiri Olsa)
- Delete standalone _syms.c and _errors.c files
[1] https://lore.kernel.org/bpf/20260223215113.924599-1-andrey.grodzovsky@crowdstrike.com/
[2] https://lore.kernel.org/bpf/20260226173342.3565919-1-andrey.grodzovsky@crowdstrike.com/
[3] https://lore.kernel.org/bpf/20260227204052.725813-1-andrey.grodzovsky@crowdstrike.com/
====================
Link: https://patch.msgid.link/20260302200837.317907-1-andrey.grodzovsky@crowdstrike.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Extend existing kprobe_multi_test subtests to validate the
kprobe.session exact function name optimization:
In kprobe_multi_session.c, add test_kprobe_syms which attaches a
kprobe.session program to an exact function name (bpf_fentry_test1)
exercising the fast syms[] path that bypasses kallsyms parsing. It
calls session_check() so bpf_fentry_test1 is hit by both the wildcard
and exact probes, and test_session_skel_api validates
kprobe_session_result[0] == 4 (entry + return from each probe).
In test_attach_api_fails, add fail_7 and fail_8 verifying error code
consistency between the wildcard pattern path (slow, parses kallsyms)
and the exact function name path (fast, uses syms[] array). Both
paths must return -ENOENT for non-existent functions.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260302200837.317907-4-andrey.grodzovsky@crowdstrike.com
Detect exact function names (no wildcards) in
bpf_program__attach_kprobe_multi_opts() and bypass kallsyms parsing,
passing the symbol directly to the kernel via syms[] array. This
benefits all callers, not just kprobe.session.
When the pattern contains no '*' or '?' characters, set syms to point
directly at the pattern string and cnt to 1, skipping the expensive
/proc/kallsyms or available_filter_functions parsing (~150ms per
function).
Error code normalization: the fast path returns ESRCH from kernel's
ftrace_lookup_symbols(), while the slow path returns ENOENT from
userspace kallsyms parsing. Convert ESRCH to ENOENT in the
bpf_link_create error path to maintain API consistency - both paths
now return identical error codes for "symbol not found".
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260302200837.317907-2-andrey.grodzovsky@crowdstrike.com
The perf_event subtest relies on SW_CPU_CLOCK sampling to trigger the BPF
program, but the current CPU burn loop can be too short on slower systems
and may fail to generate any overflow sample. This leaves pe_res unchanged
and makes the test flaky.
Make burn_cpu() take a loop count and use a longer burn only for the
perf_event subtest. Also scope perf_event_open() to the current task to
avoid wasting samples on unrelated activity.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260228074555.122950-3-sun.jian.kdev@gmail.com
The kprobe_multi subtests rely on bpf_testmod fentry ksyms.
When bpf_testmod isn't available, libbpf fails to resolve
bpf_testmod_fentry_test* and skeleton load fails with -ESRCH, causing
false failures.
Skip these subtests when env.has_testmod is false.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260228074555.122950-2-sun.jian.kdev@gmail.com
Josef Bacik says:
====================
libbpf/bpftool: support merging split BTFs
v1: https://lore.kernel.org/bpf/cover.1771605821.git.josef@toxicpanda.com/
v2: https://lore.kernel.org/bpf/cover.1771616227.git.josef@toxicpanda.com/
v3: https://lore.kernel.org/bpf/cover.1771622266.git.josef@toxicpanda.com/
v4: https://lore.kernel.org/bpf/cover.1771625484.git.josef@toxicpanda.com/
v5: https://lore.kernel.org/bpf/cover.1771950922.git.josef@toxicpanda.com/
v1->v2:
- Added a btf__dedup() call to btf__add_btf() to ensure that we don't have
duplicate types in the merged BTF.
v2->v3:
- AI review got confused about the UAF comment, so the comment was expanded to
clarify the UAF potential.
- Fixed potential clobbering of errno in the error path.
v3->v4:
- Fixed a potential silent corruption pointed out by the AI review bot.
v4->v5:
- Addressed Andrii's comments for 1/3.
- Addressed Alan and Quentin's comments for 2/3.
- Addressed Alan's comments for 3/3.
- Added my Signed-off-by for the third patch.
- Made sure to validate everything still worked.
v5->v6:
- Fixed the missed is_prefix comment.
- Fixed the removed warning about skipping vmlinux.
--- Original email ---
Hello,
I'm extending systing to do introspection on vfio devices, which requires having
the structs I need from the kernel available in userspace. Normally these are
loadable modules, but in the case of vfio there's multiple structs across
multiple modules. Normally you'd do the following to generate your vmlinux.h
with a module
bpftool btf dump file /sys/kernel/btf/<module> format c \
--base /sys/kernel/btf/vmlinux > vmlinux.h
but if you need multiple modules you have to hack together multiple dumps and
merge them together. This patch series adds support for merging multiple BTF
sources together, so you can do
bpftool btf dump file /sys/kernel/btf/<module1> \
file /sys/kernel/btf/<module2> format c \
--base /sys/kernel/btf/vmlinux > vmlinux.h
I tested this with my usecase and it works. Thanks,
Josef
====================
Link: https://patch.msgid.link/cover.1772657690.git.josef@toxicpanda.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Add a test that verifies btf__add_btf() correctly handles merging
multiple split BTF objects that share the same base BTF. The test
creates two sibling split BTFs on a common base, merges them into
a combined split BTF, and validates that base type references are
preserved while split type references are properly remapped.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/64a8c947bff1ae89efa9ba8c099466477762490f.1772657690.git.josef@toxicpanda.com
Add support for specifying multiple file sources in 'bpftool btf dump'
to generate a single C header containing types from vmlinux plus
multiple kernel modules:
bpftool btf dump file /sys/kernel/btf/mod1 file /sys/kernel/btf/mod2 format c
This is useful for BPF programs that need to access types defined in
kernel modules. Previously this required a separate bpftool invocation
for each module, producing separate headers that could not be combined
due to overlapping vmlinux type definitions.
The implementation collects all file paths, then for the multi-file
case creates an empty split BTF on the vmlinux base and iteratively
merges each module's types into it via btf__add_btf(). The single-file
code path is preserved exactly to avoid any regression risk.
Auto-detection of vmlinux as the base BTF from sysfs paths works as
before. If vmlinux itself appears in the file list it is skipped with
a warning since its types are already provided by the base.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/b19c2760ffe48cec546dd3810d237f8cad20d606.1772657690.git.josef@toxicpanda.com
btf__add_btf() currently rejects split BTF sources with -ENOTSUP.
This prevents merging types from multiple kernel module BTFs that
are all split against the same vmlinux base.
Extend btf__add_btf() to handle split BTF sources by:
- Replacing the blanket -ENOTSUP with a validation that src and dst
share the same base BTF pointer when both are split, returning
-EOPNOTSUPP on mismatch.
- Computing src_start_id from the source's base to distinguish base
type ID references (which must remain unchanged) from split type
IDs (which must be remapped to new positions in the destination).
- Using src_btf->nr_types instead of btf__type_cnt()-1 for the type
count, which is correct for both split and non-split sources.
- Skipping base string offsets (< start_str_off) during the string
rewrite loop, mirroring the type ID skip pattern. Since src and
dst share the same base BTF, base string offsets are already valid
and need no remapping.
For non-split sources the behavior is identical: src_start_id is 1,
the type_id < 1 guard is never true (VOID is already skipped), and
the remapping formula reduces to the original. start_str_off is 0
so no string offsets are skipped.
Assisted-by: Claude:claude-opus-4-6
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/c00216ed48cf7897078d9645679059d5ebf42738.1772657690.git.josef@toxicpanda.com
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
The first 3 patches in this series add some more KUnit testing for
fetching speaker ID and combining it with the system name to create
part of the qualifier for a firmware filename.
Patch #4 enables GPIOLIB in KUnit 'alltests' builds. This can be taken
separately from the first 3 patches.
The GPIO tests will skip if GPIOLIB is not enabled, but obviously it
would be ideal for 'kunit.py --alltests' runs to include these new
test cases.
To disable l2/l3 swizzling in A8x, set the respective bits in both
GRAS_NC_MODE_CNTL and RB_CCU_NC_MODE_CNTL registers. This is required
for Glymur where it is recommended to keep l2/l3 swizzling disabled.
Fixes: 288a932008 ("drm/msm/adreno: Introduce A8x GPU Support")
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Message-ID: <20260305-a8xx-ubwc-fix-v1-1-d99b6da4c5a9@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Currently, the GetQuote request handler returns explicit errors for
hypercall-level failures and timeouts, but it ignores some VMM
failures (e.g., GET_QUOTE_SERVICE_UNAVAILABLE), for which it returns
success with a zero-length Quote. This makes error handling in
userspace more complex.
The VMM reports failures via the status field in the shared GPA header,
which is inaccessible to userspace because only the Quote payload is
exposed to userspace. Parse the status field in the kernel and return
an error for Quote failures.
This preserves existing ABI behavior as userspace already treats a
zero-length Quote as a failure.
Refer to GHCI specification [1], section "TDG.VP.VMCALL <GetQuote>",
Table 3-10 and Table 3-11 for details on the GPA header and
GetQuote status codes.
Closes: https://lore.kernel.org/linux-coco/6bdf569c-684a-4459-af7c-4430691804eb@linux.intel.com/T/#u
Closes: https://github.com/confidential-containers/guest-components/issues/823
Fixes: f4738f56d1 ("virt: tdx-guest: Add Quote generation support using TSM_REPORTS")
Reported-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Tested-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Link: https://cdrdv2.intel.com/v1/dl/getContent/858626 # [1]
Link: https://patch.msgid.link/20260116230315.4023504-1-sathyanarayanan.kuppuswamy@linux.intel.com
If the command stream has larger padding sizes than the IFM and OFM
diminsions, then the calculations will underflow to a negative value.
The result is a very large region bounds which is caught on submit, but
it's better to catch it earlier.
Current mesa ethosu driver has a signedness bug which resulted in
padding of 127 (the max) and triggers this issue.
Reviewed-and-Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://patch.msgid.link/20260218-ethos-fixes-v1-3-be3fa3ea9a30@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The NPU_OP_ELEMENTWISE instruction uses a scalar value for IFM2 if the
IFM2_BROADCAST "scalar" mode is set. It is a bit (7) on the u65 and
part of a field (bits 3:0) on the u85. The driver was hardcoded to the
u85.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Reviewed-and-Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://patch.msgid.link/20260218-ethos-fixes-v1-2-be3fa3ea9a30@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
If the job submit fails before adding the job to the scheduler queue
such as when the GEM buffer bounds checks fail, then doing a
ethosu_job_put() results in a pm_runtime_put_autosuspend() without the
corresponding pm_runtime_resume_and_get(). The dma_fence_put()'s are
also unnecessary, but seem to be harmless.
Split the ethosu_job_cleanup() function into 2 parts for the before
and after the job is queued.
Fixes: 5a5e9c0228 ("accel: Add Arm Ethos-U NPU driver")
Reviewed-and-Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://patch.msgid.link/20260218-ethos-fixes-v1-1-be3fa3ea9a30@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
