See MS-ERREf 2.3.1 STATUS_ENCRYPTION_FAILED.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
See MS-ERREf 2.3.1 STATUS_DIRECTORY_IS_A_REPARSE_POINT.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
See MS-ERREf 2.3.1 STATUS_VOLUME_DISMOUNTED.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
See MS-ERREf 2.3.1 STATUS_BIOS_FAILED_TO_CONNECT_INTERRUPT.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
See MS-ERREf 2.3.1 STATUS_VARIABLE_NOT_FOUND.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
See MS-CIFS 2.2.2.4 ERRunknownlevel. Keep the name consistent with the
documentation.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
See MS-CIFS 2.2.2.4 STATUS_OS2_INVALID_LEVEL.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
See MS-CIFS 2.2.2.4 STATUS_INVALID_INFO_CLASS.
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
The KUnit test are executed when cifs.ko is loaded.
Just like `fs/ext4/mballoc.c` includes `fs/ext4/mballoc-test.c`.
`smb2maperror.c` also includes `smb2maperror_test.c`, allowing KUnit
tests to access any functions and variables in `smb2maperror.c`.
The maperror_test_check_search() checks whether all elements can be
correctly found in the array.
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
The smb2_error_map_table array currently has 1740 elements. When searching
for the last element, the original loop-based search method requires 1740
comparisons, while binary search algorithm requires only 10 comparisons.
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/linux-cifs/20260106071507.1420900-5-chenxiaosong.chenxiaosong@linux.dev/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Although the array is sorted at build time, verify the ordering again
when cifs.ko is loaded to avoid potential regressions introduced by
future script changes.
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/linux-cifs/20260106071507.1420900-4-chenxiaosong.chenxiaosong@linux.dev/
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Autogenerate the SMB2 status to error code mapping table, from the
smb2status.h common header, sorting it by NT status code so that it can be
searched by binary chopping. This also reduces the number of places this
list is duplicated in the source.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <stfrench@microsoft.com>
cc: ChenXiaoSong <chenxiaosong@kylinos.cn>
cc: linux-cifs@vger.kernel.org
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/linux-cifs/20260106071507.1420900-3-chenxiaosong.chenxiaosong@linux.dev/
Signed-off-by: Steve French <stfrench@microsoft.com>
We should make it clear that we use this strange value
instead of hiding it in same code flow.
Note this value is mainly ignored currently,
as we do the calculation again with
the negotiated max_recv_size in smb_direct_prepare().
So this is only a cosmetic change in order to
avoid confusion.
In future we may change the logic and
adjust the number of recv buffers instead
of the max_fragmented_recv_size.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When we download a file without rdma offload or get
a large directly enumeration from the server,
the server might want to send up to smbd_max_fragmented_recv_size
bytes, but if it is too large all our recv buffers
might already be moved to the recv_io.reassembly.list
and we're no longer able to grant recv credits.
The maximum fragmented upper-layer payload receive size supported
Assume max_payload_per_credit is
smbd_max_receive_size - 24 = 1340
The maximum number would be
smbd_receive_credit_max * max_payload_per_credit
1340 * 255 = 341700 (0x536C4)
The minimum value from the spec is 131072 (0x20000)
For now we use the logic we used in ksmbd before:
(1364 * 255) / 2 = 173910 (0x2A756)
Fixes: 03bee01d62 ("CIFS: SMBD: Add SMB Direct protocol initial values and constants")
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
On kthread_run() failure in ksmbd_tcp_new_connection(), the transport is
freed via free_transport(), which does not decrement active_num_conn,
leaking this counter.
Replace free_transport() with ksmbd_tcp_disconnect().
Fixes: 0d0d4680db ("ksmbd: add max connections parameter")
Cc: stable@vger.kernel.org
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch introduces a /proc filesystem interface to ksmbd, providing
visibility into the internal state of the SMB server. This allows
administrators and developers to monitor active connections, user
sessions, and opened files in real-time without relying on external
tools or heavy debugging.
Key changes include:
- Connection Monitoring (/proc/fs/ksmbd/clients): Displays a list of
active network connections, including client IP addresses, SMB dialects,
credits, and last active timestamps.
- Session Management (/proc/fs/ksmbd/sessions/): Adds a global sessions
file to list all authenticated users and their session IDs.
- Creates individual session entries (e.g., /proc/fs/ksmbd/sessions/<id>)
detailing capabilities (DFS, Multi-channel, etc.), signing/encryption
algorithms, and connected tree shares.
- File Tracking (/proc/fs/ksmbd/files): Shows all currently opened files
across the server, including tree IDs, process IDs (PID), access modes
(daccess/saccess), and oplock/lease states.
- Statistics & Counters: Implements internal counters for global server
metrics, such as the number of tree connections, total sessions, and
processed read/write bytes.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Bahubali B Gumaji <bahubali.bg@samsung.com>
Signed-off-by: Sang-Soo Lee <constant.lee@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The problem occurs when a signed request fails smb2 signature verification
check. In __process_request(), if check_sign_req() returns an error,
set_smb2_rsp_status(work, STATUS_ACCESS_DENIED) is called.
set_smb2_rsp_status() set work->next_smb2_rcv_hdr_off as zero. By resetting
next_smb2_rcv_hdr_off to zero, the pointer to the next command in the chain
is lost. Consequently, is_chained_smb2_message() continues to point to
the same request header instead of advancing. If the header's NextCommand
field is non-zero, the function returns true, causing __handle_ksmbd_work()
to repeatedly process the same failed request in an infinite loop.
This results in the kernel log being flooded with "bad smb2 signature"
messages and high CPU usage.
This patch fixes the issue by changing the return value from
SERVER_HANDLER_CONTINUE to SERVER_HANDLER_ABORT. This ensures that
the processing loop terminates immediately rather than attempting to
continue from an invalidated offset.
Reported-by: tianshuo han <hantianshuo233@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The latency tracers (scheduler, irqsoff, etc) were created when tracing
was first added. These tracers required a "snapshot" buffer that was the
same size as the ring buffer being written to. When a new max latency was
hit, the main ring buffer would swap with the snapshot buffer so that the
trace leading up to the latency would be saved in the snapshot buffer (The
snapshot buffer is never written to directly and the data within it can be
viewed without fear of being overwritten).
Later, a new feature was added to allow snapshots to be taken by user
space or even event triggers. This created a "snapshot" file that allowed
users to trigger a snapshot from user space to save the current trace.
The config for this new feature (CONFIG_TRACER_SNAPSHOT) would select the
latency tracer config (CONFIG_TRACER_MAX_LATENCY) as it would need all the
functionality from it as it already existed. But this was incorrect. As
the snapshot feature is really what the latency tracers need and not the
other way around.
Have CONFIG_TRACER_MAX_TRACE select CONFIG_TRACER_SNAPSHOT where the
tracers that needs the max latency buffer selects the TRACE_MAX_TRACE
which will then select TRACER_SNAPSHOT.
Also, go through trace.c and trace.h and make the code that only needs the
TRACER_MAX_TRACE protected by that and the code that always requires the
snapshot to be protected by TRACER_SNAPSHOT.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208183856.767870992@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Instead of having #ifdef CONFIG_TRACER_MAX_TRACE around every access to
the struct tracer's use_max_tr field, add a helper function for that
access and if CONFIG_TRACER_MAX_TRACE is not configured it just returns
false.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208183856.599390238@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When tracing was first added, there were latency tracers that would take a
snapshot of the current trace when a new max latency was hit. This
snapshot buffer was called "max_buffer". Since then, a snapshot feature
was added that allowed user space or event triggers to trigger a snapshot
of the current buffer using the same max_buffer of the trace_array.
As this snapshot buffer now has a more generic use case, calling it
"max_buffer" is confusing. Rename it to snapshot_buffer.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208183856.428446729@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace.c file was a dumping ground for most tracing code. Start
organizing it better by moving various functions out into their own files.
Move the PID filtering functions from trace.c into its own trace_pid.c
file.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.998330662@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The file trace.c has become a catchall for most things tracing. Start
making it smaller by breaking out various aspects into their own files.
Move the functions associated to the trace_printk operations out of trace.c and
into trace_printk.c.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.828744197@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function trace_printk_init_buffers() is used to expand tha
trace_printk buffers when trace_printk() is used within the kernel or in
modules. On kernel boot up, it holds off from starting the sched switch
cmdline recorder, but will start it immediately when it is added by a
module.
Currently it uses a trick to see if the global_trace buffer has been
allocated or not to know if it was called by module load or not. But this
is more of a hack, and can not be used when this code is moved out of
trace.c. Instead simply look at the system_state and if it is running then
it is know that it could only be called by module load.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.660237094@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace.c file has become a dumping ground for all tracing code and has
become quite large. In order to move the trace_printk functions out of it
these functions can not access global_trace directly, as that is something
that needs to stay static in trace.c.
Instead of testing the trace_array tr pointer to &global_trace, test the
tr->flags to see if TRACE_ARRAY_FL_GLOBAL set.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.491116245@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace.c file has become a dumping ground for all tracing code and has
become quite large. In order to move the trace_printk functions out of it
these functions can not access global_trace directly, as that is something
that needs to stay static in trace.c.
Have tracing_update_buffers() take NULL for its trace_array to denote it
should work on the global_trace top level trace_array allows that function
to be used outside of trace.c and still update the global_trace
trace_array.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.318864210@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The printk_trace is used to determine which trace_array trace_printk()
writes to. By making it a global variable among the tracing subsystem it
will allow the trace_printk functions to be moved out of trace.c and still
have direct access to that variable.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032450.144525891@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The file trace.c has become a catchall for most things tracing. Start
making it smaller by breaking out various aspects into their own files.
Make ftrace_trace_stack() into a static inline that tests if stack tracing
is enabled and if so to call __ftrace_trace_stack() to do the stack trace.
This keeps the test inlined in the fast paths and only does the function
call if stack tracing is enabled.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032449.974218132@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The file trace.c has become a catchall for most things tracing. Start
making it smaller by breaking out various aspects into their own files.
Move the __always_inline functions __trace_buffer_lock_reserve(),
__trace_buffer_unlock_commit() and trace_event_setup() into trace.h.
The trace.c file will be split up and these functions will be used in more
than one of these files. As they are already __always_inline they can
easily be moved into the trace.h header file.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032449.813550600@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The file trace.c has become a catchall for most things tracing. Start
making it smaller by breaking out various aspects into their own files.
Make the variable tracing_selftest_running global so that it can be used
by other files in the tracing subsystem and trace.c can be split up.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032449.648932796@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The tracing_disabled variable is set to one on boot up to prevent some
parts of tracing to access the tracing infrastructure before it is set up.
It also can be set after boot if an anomaly is discovered.
It is currently a static variable in trace.c and can be accessed via a
function call trace_is_disabled(). There's really no reason to use a
function call as the tracing subsystem should be able to access it
directly.
By making the variable accessed directly, code can be moved out of trace.c
without adding overhead of a function call to see if tracing is disabled
or not.
Make tracing_disabled global and remove the tracing_is_disabled() helper
function. Also add some "unlikely()"s around tracing_disabled where it's
checked in hot paths.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260208032449.483690153@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
In trace.c, the function trace_create_maxlat_file() is defined behind the
#ifdef CONFIG_TRACER_MAX_TRACE block. The #else part defines it as:
#define trace_create_maxlat_file(tr, d_tracer) \
trace_create_file("tracing_max_latency", TRACE_MODE_WRITE, \
d_tracer, tr, &tracing_max_lat_fops)
But the one place that it it used has:
#ifdef CONFIG_TRACER_MAX_TRACE
trace_create_maxlat_file(tr, d_tracer);
#endif
Which is pointless and also wrong!
It only gets created when both CONFIG_TRACE_MAX_TRACE and CONFIG_FS_NOTIFY
is defined, but the file itself should not be dependent on
CONFIG_FS_NOTIFY. Always create that file when TRACE_MAX_TRACE is defined
regardless if FS_NOTIFY is or is not.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260207191101.0e014abd@robin
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function tracing_set_filter_buffering() is only used in
trace_events_hist.c. Move it to that file and make it static.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://patch.msgid.link/20260206195936.617080218@kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the triggers were first created, they may not have had a file
parameter passed to them and things needed to be done generically.
But today, all triggers have a file parameter passed to them. Remove the
generic code and add a "if (WARN_ON_ONCE(!file))" to each trigger.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260206101351.609d8906@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Extend a KUnit test suite for the bitops API to cover more APIs from
include/asm-generic/bitops/instrumented-atomic.h.
- change_bit()
- test_and_set_bit()
- test_and_clear_bit()
- test_and_change_bit()
Verified on x86_64, i386, and arm64 architectures.
Sample KUnit output:
KTAP version 1
# Subtest: test_change_bit
ok 1 BITOPS_4
ok 2 BITOPS_7
ok 3 BITOPS_11
ok 4 BITOPS_31
ok 5 BITOPS_88
# test_change_bit: pass:5 fail:0 skip:0 total:5
ok 2 test_change_bit
KTAP version 1
# Subtest: test_test_and_set_bit_test_and_clear_bit
ok 1 BITOPS_4
ok 2 BITOPS_7
ok 3 BITOPS_11
ok 4 BITOPS_31
ok 5 BITOPS_88
# test_test_and_set_bit_test_and_clear_bit: pass:5 fail:0 skip:0 total:5
ok 3 test_test_and_set_bit_test_and_clear_bit
KTAP version 1
# Subtest: test_test_and_change_bit
ok 1 BITOPS_4
ok 2 BITOPS_7
ok 3 BITOPS_11
ok 4 BITOPS_31
ok 5 BITOPS_88
# test_test_and_change_bit: pass:5 fail:0 skip:0 total:5
ok 4 test_test_and_change_bit
Signed-off-by: Ryota Sakamoto <sakamo.ryota@gmail.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
It seems we have at least one more file to be added to the MAINTAINERS
that corresponds to bit operations.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
In the FIND_NTH_BIT macro, if the 'size' parameter is 0, both the
loop conditions and the modulo condition are not met. Consequently,
the 'tmp' variable remains uninitialized before being used in the
'found' label.
This results in the following smatch errors:
lib/find_bit.c:164 __find_nth_bit() error: uninitialized symbol 'tmp'.
lib/find_bit.c:171 __find_nth_and_bit() error: uninitialized symbol 'tmp'.
lib/find_bit.c:178 __find_nth_andnot_bit() error: uninitialized symbol 'tmp'.
lib/find_bit.c:187 __find_nth_and_andnot_bit() error: uninitialized symbol 'tmp'.
Initialize 'tmp' to 0 to ensure that fns() operates on a zeroed value
(no bits set) when size is 0, preventing the use of garbage values.
[Yury: size == 0 is generally a sign of error on client side, and in
this case, any returned value is OK because the returned value would be
greater than 'size'. Applying the patch to reduce the checker noise.]
Signed-off-by: Lee Yongjun <jun85566@gmail.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Add a KUnit test suite for the bitops API.
The existing 'lib/test_bitops.c' is preserved as-is because it contains
ad-hoc micro-benchmarks 'test_fns' and is intended to ensure no compiler
warnings from C=1 sparse checker or -Wextra compilations.
Introduce 'lib/tests/bitops_kunit.c' for functional regression testing. It
ports the test logic and data patterns from 'lib/test_bitops.c' to KUnit,
verifying correct behavior across various input patterns and
architecture-specific edge cases using isolated stack-allocated bitmaps.
The following test logic has been ported from test_bitops_startup() in
lib/test_bitops.c:
- set_bit() / clear_bit() / find_first_bit() validation ->
test_set_bit_clear_bit()
- get_count_order() validation -> test_get_count_order()
- get_count_order_long() validation -> test_get_count_order_long()
Also improve the find_first_bit() test to check the full bitmap length
(BITOPS_LENGTH) instead of omitting the last bit, ensuring the bitmap is
completely empty after cleanup.
Verified on x86_64, i386, and arm64 architectures.
Sample KUnit output:
KTAP version 1
# Subtest: bitops
# module: bitops_kunit
1..3
KTAP version 1
# Subtest: test_set_bit_clear_bit
ok 1 BITOPS_4
ok 2 BITOPS_7
ok 3 BITOPS_11
ok 4 BITOPS_31
ok 5 BITOPS_88
# test_set_bit_clear_bit: pass:5 fail:0 skip:0 total:5
ok 1 test_set_bit_clear_bit
KTAP version 1
# Subtest: test_get_count_order
ok 1 0x00000003
ok 2 0x00000004
ok 3 0x00001fff
ok 4 0x00002000
ok 5 0x50000000
ok 6 0x80000000
ok 7 0x80003000
# test_get_count_order: pass:7 fail:0 skip:0 total:7
ok 2 test_get_count_order
KTAP version 1
# Subtest: test_get_count_order_long
ok 1 0x0000000300000000
ok 2 0x0000000400000000
ok 3 0x00001fff00000000
ok 4 0x0000200000000000
ok 5 0x5000000000000000
ok 6 0x8000000000000000
ok 7 0x8000300000000000
# test_get_count_order_long: pass:7 fail:0 skip:0 total:7
ok 3 test_get_count_order_long
[Yury: trim Kconfig help message]
CC: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Ryota Sakamoto <sakamo.ryota@gmail.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
For smbdirect it required to use different ports depending
on the RDMA protocol. E.g. for iWarp 5445 is needed
(as tcp port 445 already used by the raw tcp transport for SMB),
while InfiniBand, RoCEv1 and RoCEv2 use port 445, as they
use an independent port range (even for RoCEv2, which uses udp
port 4791 itself).
Currently ksmbd is not able to function correctly at
all if the system has iWarp (RDMA_NODE_RNIC) interface(s)
and any InfiniBand, RoCEv1 and/or RoCEv2 interface(s)
at the same time.
Now we do a wildcard listen on port 5445 only
for iWarp devices and another wildcard listen
on port 445 of any InfiniBand, RoCEv1 and/or RoCEv2
devices.
The wildcard listeners also work if there is
no device of the requested node_type, this
is the same logic as we had before, but before
we had to decide between port 5445 or 445
and now both are possible at the same time.
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
For smbdirect it required to use different ports depending
on the RDMA protocol. E.g. for iWarp 5445 is needed
(as tcp port 445 already used by the raw tcp transport for SMB),
while InfiniBand, RoCEv1 and RoCEv2 use port 445, as they
use an independent port range (even for RoCEv2, which uses udp
port 4791 itself).
And cifs.ko uses 5445 with a fallback to 445, which
means depending on the available interfaces, it tries
5445 in the RoCE range or may tries iWarp with 445
as a fallback. This leads to strange error messages
and strange network captures.
To avoid these problems they will be able to
use rdma_restrict_node_type(RDMA_NODE_RNIC) before
trying port 5445 and rdma_restrict_node_type(RDMA_NODE_IB_CA)
before trying port 445. It means we'll get early
-ENODEV early from rdma_resolve_addr() without any
network traffic and timeouts.
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
For smbdirect it required to use different ports depending
on the RDMA protocol. E.g. for iWarp 5445 is needed
(as tcp port 445 already used by the raw tcp transport for SMB),
while InfiniBand, RoCEv1 and RoCEv2 use port 445, as they
use an independent port range (even for RoCEv2, which uses udp
port 4791 itself).
Currently ksmbd is not able to function correctly at
all if the system has iWarp (RDMA_NODE_RNIC) interface(s)
and any InfiniBand, RoCEv1 and/or RoCEv2 interface(s)
at the same time.
And cifs.ko uses 5445 with a fallback to 445, which
means depending on the available interfaces, it tries
5445 in the RoCE range or may tries iWarp with 445
as a fallback. This leads to strange error messages
and strange network captures.
To avoid these problems they will be able to
use rdma_restrict_node_type(RDMA_NODE_RNIC) before
trying port 5445 and rdma_restrict_node_type(RDMA_NODE_IB_CA)
before trying port 445. It means we'll get early
-ENODEV early from rdma_resolve_addr() without any
network traffic and timeouts.
This is designed to be called before calling any
of rdma_bind_addr(), rdma_resolve_addr() or rdma_listen().
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-rdma@vger.kernel.org
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Acked-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
With smbdirect_send_batch processing we likely have requests without
IB_SEND_SIGNALED, which will be destroyed in the final request
that has IB_SEND_SIGNALED set.
If the connection is broken all requests are signaled
even without explicit IB_SEND_SIGNALED.
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The server has similar logic and it makes sure that
request->wr is used instead of a stack struct ib_send_wr send_wr.
This makes sure send_done can see request->wr.send_flags
as the next commit will check for IB_SEND_SIGNALED
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When we are about to use the last send credit that was
granted to us by the peer, we need to wait until
we are ourself able to grant at least one credit
to the peer. Otherwise it might not be possible
for the peer to grant more credits.
The following sections in MS-SMBD are related to this:
3.1.5.1 Sending Upper Layer Messages
...
If Connection.SendCredits is 1 and the CreditsGranted field of the
message is 0, stop processing.
...
3.1.5.9 Managing Credits Prior to Sending
...
If Connection.ReceiveCredits is zero, or if Connection.SendCredits is
one and the Connection.SendQueue is not empty, the sender MUST allocate
and post at least one receive of size Connection.MaxReceiveSize and MUST
increment Connection.ReceiveCredits by the number allocated and posted.
If no receives are posted, the processing MUST return a value of zero to
indicate to the caller that no Send message can be currently performed.
...
This is a similar logic as we have in the server.
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
It turns out that our code will corrupt the stream of
reassabled data transfer messages when we trigger an
immendiate (empty) send.
In order to fix this we'll have a single 'batch' credit per
connection. And code getting that credit is free to use
as much messages until remaining_length reaches 0, then
the batch credit it given back and the next logical send can
happen.
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This will allow us to use similar logic as we have in
the server soon, so that we can share common code later.
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is basically a copy of smb_direct_{alloc,free}_sendmsg()
in the server, with just using ib_dma_unmap_page() in all
cases, which is the same as ib_dma_unmap_single().
We'll use this logic in common code in future.
(I basically backported it from my branch that
as already has everything in common).
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is like smb_direct_post_send() in the server
and will simplify porting the smbdirect_send_batch
and credit related logic from the server.
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This simplifies the logic and prepares the use of
smbdirect_send_batch in order to make sure
all messages in a multi fragment send are grouped
together.
We'll add the smbdirect_send_batch processin
in a later patch.
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If we reach this the connection is already broken as
smbd_post_send() already called
smbd_disconnect_rdma_connection().
This will also simplify further changes.
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
We either reach this code path before we call
new_credits = manage_credits_prior_sending(sc),
which means new_credits is still 0
or the connection is already broken as
smbd_post_send() already called
smbd_disconnect_rdma_connection().
This will also simplify further changes.
Cc: <stable@vger.kernel.org> # 6.18.x
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
