It was possible for two query interface works to be concurrently trying
to update the interfaces.
Prevent this by checking and updating iface_last_update under
iface_lock.
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a missing ses->iface_lock in cifs_setup_session,
around ses->iface_last_update.
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
is_open, has_lease and on_list are stored in the same bitfield byte in
struct cached_fid but are updated in different code paths that may run
concurrently. Bitfield assignments generate byte read–modify–write
operations (e.g. `orb $mask, addr` on x86_64), so updating one flag can
restore stale values of the others.
A possible interleaving is:
CPU1: load old byte (has_lease=1, on_list=1)
CPU2: clear both flags (store 0)
CPU1: RMW store (old | IS_OPEN) -> reintroduces cleared bits
To avoid this class of races, convert these flags to separate bool
fields.
Cc: stable@vger.kernel.org
Fixes: ebe98f1447 ("cifs: enable caching of directories for which a lease is held")
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We used to use the cifs_tcp_ses_lock to protect a lot of objects
that are not just the server, ses or tcon lists. We later introduced
srv_lock, ses_lock and tc_lock to protect fields within the
corresponding structs. This was done to provide a more granular
protection and avoid unnecessary serialization.
There were still a couple of uses of cifs_tcp_ses_lock to provide
tcon fields. In this patch, I've replaced them with tc_lock.
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There were a couple of discrepencies in lock ordering for the locks
that were specified in the lock ordering notes. Did an analysis
of the current codebase (using LLM) and found two pairs whose ordering
in these notes were wrong. It also found one lock that was recently
removed, and a few locks that weren't documented here before.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Today in most other code paths in cifs.ko, the decision of whether
to retry a command depends on two mount options: retrans and hard.
However, the read/write code paths diverged from this and would only
retry if the error returned was -EAGAIN. However, there are other
replayable errors in cifs.ko, for which is_replayable_errors helper
was written. This change makes read/write codepaths consistent with
other code-paths.
This change also does the following:
1. The SMB2 read/write code diverged significantly (presumably since
they were changed during netfs refactor at different times). This
changes the response verification logic to be consistent.
2. Moves the netfs tracepoints to slightly different locations in order
to make debugging easier.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This change fixes the instance of double incrementing of
retry_count. The increment of this count already happens
when netfs_reissue_write gets called. Incrementing this
value before is not necessary.
Fixes: 4acb665cf4 ("netfs: Work around recursion by abandoning retry if nothing read")
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The *_subreq_terminated functions today only process the NEED_RETRY
flag when the subreq was successful or failed with EAGAIN error.
However, there could be other retriable errors for network filesystems.
Avoid this by processing the NEED_RETRY irrespective of the error
code faced by the subreq. If it was specifically marked for retry,
the error code must not matter.
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
On replayable errors, we call smb2_should_replays that does these
things today:
1. decide if we need to replay the command again
2. sleep to back-off the failed request
3. update the next sleep value
We will not be able to use this for async requests, when this is
processed in callbacks (as this will be called in cifsd threads that
should not sleep in response processing).
Modify the behaviour by taking the sleep out of smb2_should_replay
and performing the sleep for back-off just before actually
performing the replay.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Zero out @err_iov and @err_buftype before retrying SMB2_open() to
prevent an UAF bug if @data != NULL, otherwise a double free.
Fixes: e3a4363302 ("smb/client: fix memory leak in smb2_open_file()")
Reported-by: David Howells <dhowells@redhat.com>
Closes: https://lore.kernel.org/r/2892312.1770306653@warthog.procyon.org.uk
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Exercise the annotate command with data type profiling feature with C.
For that extend the existing data type profiling shell test to profile
the datasym workload, then annotate the result expecting to see some
data structures from the C code.
Committer testing:
root@number:~# perf test 'perf data type profiling tests'
83: perf data type profiling tests : Ok
root@number:~# perf test -vv 'perf data type profiling tests'
83: perf data type profiling tests:
--- start ---
test child forked, pid 125028
Basic Rust perf annotate test
Basic annotate test [Success]
Pipe Rust perf annotate test
Pipe annotate test [Success]
Basic C perf annotate test
Basic annotate test [Success]
Pipe C perf annotate test
Pipe annotate test [Success]
---- end(0) ----
83: perf data type profiling tests : Ok
root@number:~#
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Exercise the annotate command with data type profiling feature on the
rust runtime. For that add a new shell test, which will profile the
code_with_type workload, then annotate the result expecting to see some
data structures from the rust code.
Committer testing:
root@number:~# perf test 'perf data type profiling tests'
83: perf data type profiling tests : Ok
root@number:~# perf test -v 'perf data type profiling tests'
83: perf data type profiling tests : Ok
root@number:~# perf test -vv 'perf data type profiling tests'
83: perf data type profiling tests:
--- start ---
test child forked, pid 111044
Basic perf annotate test
Basic annotate test [Success]
Pipe perf annotate test
Pipe annotate test [Success]
---- end(0) ----
83: perf data type profiling tests : Ok
root@number:~#
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The purpose of the workload is to gather samples of rust runtime. To
achieve that it has a dummy rust library linked with it.
Per recommendations for such scenarios [1], the rust library is
statically linked.
An example:
$ perf record perf test -w code_with_type
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.160 MB perf.data (4074 samples) ]
$ perf report --stdio --dso perf -s srcfile,srcline
45.16% ub_checks.rs ub_checks.rs:72
6.72% code_with_type.rs code_with_type.rs:15
6.64% range.rs range.rs:767
4.26% code_with_type.rs code_with_type.rs:21
4.23% range.rs range.rs:0
3.99% code_with_type.rs code_with_type.rs:16
[...]
[1]: https://doc.rust-lang.org/reference/linkage.html#mixed-rust-and-foreign-codebases
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The LPI2C controller sends a NACK at the end of a receive command
unless another receive command is already queued in MTDR. During
SMBus block reads, this causes the controller to NACK immediately
after receiving the block length byte, aborting the transfer before
the data bytes are read.
Fix this by queueing a second receive command as soon as the block
length byte is received, keeping MTDR non-empty and ensuring
continuous ACKs. The initial receive command reads the block length,
and the subsequent command reads the remaining data bytes according
to the reported length.
Fixes: a55fa9d0e4 ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260123105459.3448822-1-carlos.song@nxp.com
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add quirk for the Onkyo SE-300PCIE variant with PCI subsystem ID
(160b:0102). This variant (OK0011) was found in the official Windows
driver packages.
Also, reorder entries and fix the indentation to maintain
consistency.
Signed-off-by: Harin Lee <me@harin.net>
Link: https://patch.msgid.link/20260208133001.680550-1-me@harin.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a feature test to identify if the rust compiler is available, so
that perf could build rust based worloads based on that.
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit bb5a920b90 ("perf stat: Ensure metrics are displayed even
with failed events") with failed events") made it so that counters which
weren't enabled in the kernel were handled as NaN in metrics.
This caused the "Parse and process metrics" test to start failing as it
wasn't putting a non-zero value in these variables.
Add arbitrary values of 1 to fix the test.
Fixes: bb5a920b90 ("perf stat: Ensure metrics are displayed even with failed events")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add quotes to avoid the following warning:
```
In tests/shell/record.sh line 264:
[ $(uname -m) = "s390x" ] && {
^---------^ SC2046 (warning): Quote this to prevent word splitting.
For more information:
https://www.shellcheck.net/wiki/SC2046 -- Quote this to prevent word splitt...
```
Fixes: c73a56ed3c ("perf test: Fix test case Leader sampling on s390")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The mute and mic-mute LEDs on HP ENVY x360 Convertible 15-es0xxx
(PCI SSID 103c:88b3) do not work with the current driver.
This model requires a combination of COEFBIT and GPIO fixups to
correctly control the LEDs. Introduce a new fixup function
alc245_fixup_hp_envy_x360_mute_led and add a quirk to apply it.
Signed-off-by: Illia Barbashyn <04baril@gmail.com>
Link: https://patch.msgid.link/20260207221955.24132-1-04baril@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Simplify the hardlockup detector's probe path and remove its implicit
dependency on pinned per-cpu execution.
Refactor hardlockup_detector_event_create() to be stateless. Return the
created perf_event pointer to the caller instead of directly modifying the
per-cpu 'watchdog_ev' variable. This allows the probe path to safely
manage a temporary event without the risk of leaving stale pointers should
task migration occur.
Link: https://lkml.kernel.org/r/20260129022629.2201331-1-realwujing@gmail.com
Signed-off-by: Shouxin Sun <sunshx@chinatelecom.cn>
Signed-off-by: Junnan Zhang <zhangjn11@chinatelecom.cn>
Signed-off-by: Qiliang Yuan <yuanql9@chinatelecom.cn>
Signed-off-by: Qiliang Yuan <realwujing@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Jinchao Wang <wangjinchao600@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Song Liu <song@kernel.org>
Cc: Thorsten Blum <thorsten.blum@linux.dev>
Cc: Wang Jinchao <wangjinchao600@gmail.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When reading /proc/[pid]/stat, do_task_stat() accesses task->real_parent
without proper RCU protection, which leads to:
cpu 0 cpu 1
----- -----
do_task_stat
var = task->real_parent
release_task
call_rcu(delayed_put_task_struct)
task_tgid_nr_ns(var)
rcu_read_lock <--- Too late to protect task->real_parent!
task_pid_ptr <--- UAF!
rcu_read_unlock
This patch uses task_ppid_nr_ns() instead of task_tgid_nr_ns() to add
proper RCU protection for accessing task->real_parent.
Link: https://lkml.kernel.org/r/20260128083007.3173016-1-alexjlzheng@tencent.com
Fixes: 06fffb1267 ("do_task_stat: don't take rcu_read_lock()")
Signed-off-by: Jinliang Zheng <alexjlzheng@tencent.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: ruippan <ruippan@tencent.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cpustat_tail indexes cpustat_util[], which is a NUM_SAMPLE_PERIODS-sized
ring buffer. need_counting_irqs() currently wraps the index using
NUM_HARDIRQ_REPORT, which only happens to match NUM_SAMPLE_PERIODS.
Use NUM_SAMPLE_PERIODS for the wrap to keep the ring math correct even if
the NUM_HARDIRQ_REPORT or NUM_SAMPLE_PERIODS changes.
Link: https://lkml.kernel.org/r/tencent_7068189CB6D6689EB353F3D17BF5A5311A07@qq.com
Fixes: e9a9292e23 ("watchdog/softlockup: Report the most frequent interrupts")
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zhang Run <zhang.run@zte.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Enabling KCSAN is causing a large number of duplicate types in BTF for
core kernel structs like task_struct [1]. This is due to the definition
in include/linux/compiler_types.h
`#ifdef __SANITIZE_THREAD__
...
`#define __data_racy volatile
..
`#else
...
`#define __data_racy
...
`#endif
Because some objects in the kernel are compiled without KCSAN flags
(KCSAN_SANITIZE) we sometimes get the empty __data_racy annotation for
objects; as a result we get multiple conflicting representations of the
associated structs in DWARF, and these lead to multiple instances of core
kernel types in BTF since they cannot be deduplicated due to the
additional modifier in some instances.
Moving the __data_racy definition under CONFIG_KCSAN avoids this problem,
since the volatile modifier will be present for both KCSAN and
KCSAN_SANITIZE objects in a CONFIG_KCSAN=y kernel.
Link: https://lkml.kernel.org/r/20260116091730.324322-1-alan.maguire@oracle.com
Fixes: 31f605a308 ("kcsan, compiler_types: Introduce __data_racy type qualifier")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Suggested-by: Marco Elver <elver@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Bart van Assche <bvanassche@acm.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Naman Jain <namjain@linux.microsoft.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This function returns NULL if kho_restore_page() returns NULL, which
happens in a couple of corner cases. It never returns an error code.
Link: https://lkml.kernel.org/r/20260123190506.1058669-1-tycho@kernel.org
Signed-off-by: Tycho Andersen (AMD) <tycho@kernel.org>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Cc: Alexander Graf <graf@amazon.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce an in-kernel test module to validate the core logic of the Live
Update Orchestrator's File-Lifecycle-Bound feature. This provides a
low-level, controlled environment to test FLB registration and callback
invocation without requiring userspace interaction or actual kexec
reboots.
The test is enabled by the CONFIG_LIVEUPDATE_TEST Kconfig option.
Link: https://lkml.kernel.org/r/20251218155752.3045808-6-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Gow <davidgow@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <kees@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce a mechanism for managing global kernel state whose lifecycle is
tied to the preservation of one or more files. This is necessary for
subsystems where multiple preserved file descriptors depend on a single,
shared underlying resource.
An example is HugeTLB, where multiple file descriptors such as memfd and
guest_memfd may rely on the state of a single HugeTLB subsystem.
Preserving this state for each individual file would be redundant and
incorrect. The state should be preserved only once when the first file is
preserved, and restored/finished only once the last file is handled.
This patch introduces File-Lifecycle-Bound (FLB) objects to solve this
problem. An FLB is a global, reference-counted object with a defined set
of operations:
- A file handler (struct liveupdate_file_handler) declares a dependency
on one or more FLBs via a new registration function,
liveupdate_register_flb().
- When the first file depending on an FLB is preserved, the FLB's
.preserve() callback is invoked to save the shared global state. The
reference count is then incremented for each subsequent file.
- Conversely, when the last file is unpreserved (before reboot) or
finished (after reboot), the FLB's .unpreserve() or .finish() callback
is invoked to clean up the global resource.
The implementation includes:
- A new set of ABI definitions (luo_flb_ser, luo_flb_head_ser) and a
corresponding FDT node (luo-flb) to serialize the state of all active
FLBs and pass them via Kexec Handover.
- Core logic in luo_flb.c to manage FLB registration, reference
counting, and the invocation of lifecycle callbacks.
- An API (liveupdate_flb_get/_incoming/_outgoing) for other kernel
subsystems to safely access the live object managed by an FLB, both
before and after the live update.
This framework provides the necessary infrastructure for more complex
subsystems like IOMMU, VFIO, and KVM to integrate with the Live Update
Orchestrator.
Link: https://lkml.kernel.org/r/20251218155752.3045808-5-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Gow <davidgow@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <kees@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Switch LUO to use the private list iterators.
Link: https://lkml.kernel.org/r/20251218155752.3045808-4-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Gow <davidgow@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <kees@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a KUnit test suite for the new private list primitives.
The test defines a struct with a __private list_head and exercises every
macro defined in <linux/list_private.h>.
This ensures that the macros correctly handle the ACCESS_PRIVATE()
abstraction and compile without warnings when acting on private members,
verifying that qualifiers are stripped and offsets are calculated
correctly.
Link: https://lkml.kernel.org/r/20251218155752.3045808-3-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Matlack <dmatlack@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <kees@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "list private v2 & luo flb", v9.
This series introduces two connected infrastructure improvements: a new
API for handling private linked lists, and the "File-Lifecycle-Bound"
(FLB) mechanism for the Live Update Orchestrator.
1. Private List Primitives (patches 1-3)
Recently, Linux introduced the ability to mark structure members as
__private and access them via ACCESS_PRIVATE(). This enforces better
encapsulation by ensuring internal details are only accessible by the
owning subsystem.
However, struct list_head is frequently used as an internal linkage
mechanism within these private sections. The standard macros in
<linux/list.h> do not support ACCESS_PRIVATE() natively. Consequently,
subsystems using private lists are forced to implement ad-hoc
workarounds or local iterator macros.
This series adds <linux/list_private.h>, providing a set of
primitives identical to those in <linux/list.h> but designed for
private list heads. It also includes a KUnit test suite to verify that
the macros correctly handle pointer offsets and qualifiers.
2. This series adds FLB (patches 4-5) support to Live Update that also
internally uses private lists.
FLB allows global kernel state (such as IOMMU domains or HugeTLB
state) to be preserved once, shared across multiple file descriptors,
and restored when needed. This is necessary for subsystems where
multiple preserved file descriptors depend on a single, shared
underlying resource. Preserving this state for each individual file
would be redundant and incorrect.
FLB uses reference counting tied to the lifecycle of preserved
files. The state is preserved when the first file depending on it is
preserved, and restored or cleaned up only when the last file is
handled.
This patch (of 5):
Linux recently added an ability to add private members to structs (i.e.
__private) and access them via ACCESS_PRIVATE(). This ensures that those
members are only accessible by the subsystem which owns the struct type,
and not to the object owner.
However, struct list_head often needs to be placed into the private
section to be manipulated privately by the subsystem.
Add macros to support private list manipulations in
<linux/list_private.h>.
[akpm@linux-foundation.org: fix kerneldoc]
Link: https://lkml.kernel.org/r/20251218155752.3045808-1-pasha.tatashin@soleen.com
Link: https://lkml.kernel.org/r/20251218155752.3045808-2-pasha.tatashin@soleen.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: David Gow <davidgow@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <kees@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Samiullah Khawaja <skhawaja@google.com>
Cc: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The custom definition of 'struct timespec64' is incompatible with both the
kernel's internal definition and the glibc type, at least on big-endian
targets that have the tv_nsec field in a different place, and the
definition clashes with any userspace that also defines a timespec64
structure.
Running the header check with -Wpadding enabled produces this output that
warns about the incorrect padding:
usr/include/linux/taskstats.h:25:1: error: padding struct size to alignment boundary with 4 bytes [-Werror=padded]
Remove the hack and instead use the regular __kernel_timespec type that is
meant to be used in uapi definitions.
Link: https://lkml.kernel.org/r/20260202095906.1344100-1-arnd@kernel.org
Fixes: 29b63f6eff0e ("delayacct: add timestamp of delay max")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Jiang Kun <jiang.kun2@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The run-command target does not always require a kernel configuration
to be present.
Drop the dependency so it can be executed without one.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Link: https://patch.msgid.link/20260205-kbuild-run-command-v1-1-b8cbbc3db270@weissschuh.net
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
One final batch of fixes for the Tegra SPI drivers, the main one is a
batch of fixes for races with the interrupts in the Tegra210 QSPI driver
that Breno has been working on for a while.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmmHMvkACgkQJNaLcl1U
h9B0MQf8Dx2LbqUfENIJKUDcqUkKxChLYycHXDkG09LVtYyXN4Psq4StIJEmMKGG
n1qwEhNUFI1khCcc+UavWNlwgbuxuFDTwko+owlVnmg3oYYEgHOG2mhib/FgSzxo
NBmRpKsT1hn4JbF1EA4+Y6m5pfYK3hYJsr8A+5lW0RxHXuwNMbeXLU4k/2jiZdD2
3mST3vIFUQ6S88kKSkpMRX1gfU2g0qyWyxxRpUSg3hILL9R7Rjdab8gnN5hu86qJ
dV0ijY2txKTf+rWEQmN1MC1lUmF7PZCl4v3kY+fnbQTZIEjfu0kbA7hpHfJmwX/k
Od9yMdLQu+4APtND0Dnioe0WDeem1A==
=inLr
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"One final batch of fixes for the Tegra SPI drivers, the main one is a
batch of fixes for races with the interrupts in the Tegra210 QSPI
driver that Breno has been working on for a while"
* tag 'spi-fix-v6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: tegra114: Preserve SPI mode bits in def_command1_reg
spi: tegra: Fix a memory leak in tegra_slink_probe()
spi: tegra210-quad: Protect curr_xfer check in IRQ handler
spi: tegra210-quad: Protect curr_xfer clearing in tegra_qspi_non_combined_seq_xfer
spi: tegra210-quad: Protect curr_xfer in tegra_qspi_combined_seq_xfer
spi: tegra210-quad: Protect curr_xfer assignment in tegra_qspi_setup_transfer_one
spi: tegra210-quad: Move curr_xfer read inside spinlock
spi: tegra210-quad: Return IRQ_HANDLED when timeout already processed transfer
One last fix for v6.19, the voltages for the SpaceMIT P1 were not
described correctly.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmmHMTUACgkQJNaLcl1U
h9DpyQf/SB2DoE+IxRexzdrrH5BGkPPr+vKTq6j7UI3yh872wsf938vOADDjHgBr
/0/VDEWOzXl2Diqqna8QWT/F4fLmnY+jxL3xguIBMprhlb4qo/TZAu2/ggYxqY7y
Hu9d06TsLRJCdJz9wz8/sXUMLQvZCHHOwxs14MBT4OcR53YcPIGst6C/kIlH9CRw
gkLf95Swp2BKT3ThABqKumNr6PdxlnhiDcH7nNgAI6f7pSlz6lZRgmoFaaBNEqOC
daDX/R1JdiSqpZJmAsPhuHWxlgq39iGwZ0RPeilLxjEHx49bmO3MNe9yfzsYJG58
GvmIaqkI5ISoA6yoSIRPIP81tJS2dw==
=cce6
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One last fix for v6.19: the voltages for the SpaceMIT P1 were not
described correctly"
* tag 'regulator-fix-v6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: spacemit-p1: Fix n_voltages for BUCK and LDO regulators
Simply copying shared data to a local variable cannot prevent data
races. The compiler is allowed to optimize away the local copy and
re-read the shared memory, causing a Time-of-Check Time-of-Use (TOCTOU)
issue if the data changes between the check and the usage.
To enforce the use of the local variable, use READ_ONCE() when reading
the shared data and WRITE_ONCE() when updating it. Apply these macros to
the three identified locations (curr_sense, adc, and fault) where local
variables are used for error validation, ensuring the value remains
consistent.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Closes: https://lore.kernel.org/all/6fe17868327207e8b850cf9f88b7dc58b2021f73.camel@decadent.org.uk/
Fixes: f5bae2642e ("hwmon: Driver for MAX16065 System Manager and compatibles")
Fixes: b8d5acdcf5 ("hwmon: (max16065) Use local variable to avoid TOCTOU")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Link: https://lore.kernel.org/r/20260203121443.5482-1-hanguidong02@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Replace sprintf() with sysfs_emit() in sysfs 'show' functions.
sysfs_emit() is preferred because it automatically handles the
buffer size and PAGE_SIZE boundary checks, preventing potential
buffer overflows.
This aligns the legacy code with the new functions in the driver
that already utilize sysfs_emit.
Signed-off-by: Filippo Muscherà <filippo.muschera@gmail.com>
Link: https://lore.kernel.org/r/20260201202721.3871-1-filippo.muschera@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
"make htmldocs" reports build errors/warnings:
Documentation/hwmon/stef48h28.rst:45: ERROR: Missing matching underline for section title overline.
=========================================================
in1_label "vin".
in1_input Measured voltage. From READ_VIN register. [docutils]
Documentation/hwmon/stef48h28.rst:73: WARNING: Title underline too short.
temp2_input Measured temperature. From READ_TEMPERATURE_2 register.
========================================================= [docutils]
Fix the table overline/underline line lengths and convert it to
a 2-column table.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20260128002200.1665941-1-rdunlap@infradead.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add Support for HiTRON HAC300S PSU. This is a AC/DC hot-swappable
CompactPCI Serial Dual output active current sharing switching power
supply with a 312W rating.
Signed-off-by: Vasileios Amoiridis <vasileios.amoiridis@cern.ch>
Link: https://lore.kernel.org/r/20260119190806.35276-3-vassilisamir@gmail.com
[groeck: Fix whitespace / alignment problems; return -ENODATA from
hac300s_read_byte_data() if the PMBus core can handle the operation]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add HiTRON HAC300S PSU to trivial devices since it is simple PMBUS
capable device.
Since this is the first supported device from this vendor, document its
name to the vendor-prefixes.yaml file as well.
Signed-off-by: Vasileios Amoiridis <vasileios.amoiridis@cern.ch>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260119190806.35276-2-vassilisamir@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Implement reading temperature thresholds through
EC_CMD_THERMAL_GET_THRESHOLD/EC_CMD_THERMAL_SET_THRESHOLD.
Thresholds are mapped as follows between the EC and hwmon:
hwmon_temp_max - EC_TEMP_THRESH_WARN
hwmon_temp_crit - EC_TEMP_THRESH_HIGH
hwmon_temp_emergency - EC_TEMP_THRESH_HALT
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20260118-cros_ec-hwmon-pwm-v2-4-77eb1709b031@weissschuh.net
[groeck: Rearrange code to no longer use unreachable() since that causes
a hiccup with some versions of gcc and objtool]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Here are some small, last-minute binder C and Rust driver fixes for
reported issues. They include a number of fixes for reported crashes
and other problems.
All of these have been in linux-next this week, and longer.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaYcc8Q8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yniiACeLH9dyrdwuRBdWy466fO2nkwjb8sAn2cezXQW
kOuhA2wuweaDq1W8wi14
=qSrB
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull binder fixes from Greg KH:
"Here are some small, last-minute binder C and Rust driver fixes for
reported issues. They include a number of fixes for reported crashes
and other problems.
All of these have been in linux-next this week, and longer"
* tag 'char-misc-6.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binderfs: fix ida_alloc_max() upper bound
rust_binderfs: fix ida_alloc_max() upper bound
binder: fix BR_FROZEN_REPLY error log
rust_binder: add additional alignment checks
binder: fix UAF in binder_netlink_report()
rust_binder: correctly handle FDA objects of length zero
performance regressions in the recent rewrite
of the SCHED_MM_CID management code:
- Fix livelock triggered by BPF CI testing
- Fix hard lockup on weakly ordered systems
- Simplify the dropping of CIDs in the exit path
by removing an unintended transition phase.
- Fix performance/scalability regression on a
thread-pool benchmark by optimizing transitional
CIDs when scheduling out.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/PkF
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Miscellaneous MMCID fixes to address bugs and performance regressions
in the recent rewrite of the SCHED_MM_CID management code:
- Fix livelock triggered by BPF CI testing
- Fix hard lockup on weakly ordered systems
- Simplify the dropping of CIDs in the exit path by removing an
unintended transition phase
- Fix performance/scalability regression on a thread-pool benchmark
by optimizing transitional CIDs when scheduling out"
* tag 'sched-urgent-2026-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/mmcid: Optimize transitional CIDs when scheduling out
sched/mmcid: Drop per CPU CID immediately when switching to per task mode
sched/mmcid: Protect transition on weakly ordered systems
sched/mmcid: Prevent live lock on task to CPU mode transition
Replace BUG_ON() with panic() in panic_on_wq_watchdog(). This is not
a bug condition but a deliberate forced panic requested by the user
via module parameters to crash the system for debugging purposes.
Using panic() instead of BUG_ON() makes this intent clearer and provides
more informative output about which threshold was exceeded and the actual
values, making it easier to diagnose the stall condition from crash dumps.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a new module parameter 'panic_on_stall_time' that triggers a panic
when a workqueue stall persists for longer than the specified duration
in seconds.
Unlike 'panic_on_stall' which counts accumulated stall events, this
parameter triggers based on the duration of a single continuous stall.
This is useful for catching truly stuck workqueues rather than
accumulating transient stalls.
Usage:
workqueue.panic_on_stall_time=120
This would panic if any workqueue pool has been stalled for 120 seconds
or more.
The stall duration is measured from the workqueue last progress
(poll_ts) which accounts for legitimate system stalls.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Bump up the Clang minimum version requirements
for livepatch builds, due to Clang assembler
section handling bugs causing silent
miscompilations.
- Strip livepatching symbol artifacts from
non-livepatch modules.
- Fix livepatch build warnings when certain
Clang LTO options are enabled.
- Fix livepatch build error when
CONFIG_MEM_ALLOC_PROFILING_DEBUG=y.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmmHCvwRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hkTQ/8DhLI5m9CqhMaouuR5Vm9POKgFOXAe6uz
eHTuKhpJlw+anhNjeUA7PtYbnkrj0j+aNo5SmrfD4Yx8CW7dCt+oO3Y5ziVhkPHw
46Q/9KbmcT11uPbYywp/G4b15FF8YYu9slzhGau/Wa9H+oqU/WPoGapJsMPpUtBo
s0qGxdr2G3WZyD9H/wgCyhMwCOkAYMJ0sHxpGgRajLefDutsRvtlau/ktYU79vI3
nUFteD3YDIAUblBtZPogsCP36QJlx7TWCUNK02vPeOYRh3xPjf3iG+vgf1+sjZHV
P20psekpDwhh1KyeVziUyihUy8TmEVVozRvsrUKVlXmEqLqDtNrysqKTSp5/yRdT
MqgNwDrvv2wW/DKYJhefbuttx3ppAErrnJ3zC9TYSmdn27feKPDJcD1OmdS3BIpH
x9u/eVbOS8xbsOc/t3/Al7CRazvjLU0+OXsMJWbmAaO3tE7SwHq2aOnGbLGjvwWC
Ts1AYfNp4H41CLLFnmKR8q2t/DOBhefW8p3cR5U+cVQ7PdqKRT+TwKWVnCrbrBcJ
71702IrqoghwUrmhtxdZR0jZLtwb80s8zqdbrHojXSbXUFfYwwHNNaW1NSEpdSr4
W8xYfSPrK71OGZ6oh/v1Wce6D+mxqb6kYD8DRLgOdbxrnvLwUhGXxxNDjfXA0f4B
abjGHlAyoCs=
=cdu2
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2026-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar::
- Bump up the Clang minimum version requirements for livepatch
builds, due to Clang assembler section handling bugs causing
silent miscompilations
- Strip livepatching symbol artifacts from non-livepatch modules
- Fix livepatch build warnings when certain Clang LTO options
are enabled
- Fix livepatch build error when CONFIG_MEM_ALLOC_PROFILING_DEBUG=y
* tag 'objtool-urgent-2026-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/klp: Fix unexported static call key access for manually built livepatch modules
objtool/klp: Fix symbol correlation for orphaned local symbols
livepatch: Free klp_{object,func}_ext data after initialization
livepatch: Fix having __klp_objects relics in non-livepatch modules
livepatch/klp-build: Require Clang assembler >= 20
