To support tailcalls in subprogs, tail_call_cnt needs to be on the BPF
trampoline stack frame. In a regular BPF program or subprog stack
frame, the position of tail_call_cnt is after the NVR save area
(BPF_PPC_STACK_SAVE). To avoid complex logic in deducing offset for
tail_call_cnt, it has to be kept at the same offset on the trampoline
frame as well. But doing that wastes nearly all of BPF_PPC_STACK_SAVE
bytes on the BPF trampoline stack frame as the NVR save area is not
the same for BPF trampoline and regular BPF programs. Address this by
moving tail_call_cnt to the bottom of the frame.
This change avoids the need to account for BPF_PPC_STACK_SAVE bytes
in the BPF trampoline stack frame when support for tailcalls in BPF
subprogs is added later. Also, this change makes offset calculation
of tail_call_cnt field simpler all across.
Signed-off-by: Abhishek Dubey <adubey@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260124075223.6033-2-adubey@linux.ibm.com
Eric Dumazet says:
====================
tcp: tcp_tx_timestamp() fix
Fix an old bug in tcp_tx_timestamp().
Add one corresponding packetdrill test.
====================
Link: https://patch.msgid.link/20260127123828.4098577-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test tcp_tx_timestamp() behavior after ("tcp: tcp_tx_timestamp()
must look at the rtx queue").
Without the fix, this new test fails like this:
tcp_timestamping_tcp_tx_timestamp_bug.pkt:55: runtime error in recvmsg call: Expected result 0 but got -1 with errno 11 (Resource temporarily unavailable)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20260127123828.4098577-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_tx_timestamp() is only called at the end of tcp_sendmsg_locked()
before the final tcp_push().
By the time it is called, it is possible all the copied data
has been sent already (transmit queue is empty).
If this is the case, use the last skb in the rtx queue.
Fixes: 75c119afe1 ("tcp: implement rb-tree based retransmit queue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20260127123828.4098577-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the check if netfilter's static keys are available. netfilter defines
and exports static keys if CONFIG_JUMP_LABEL is enabled. (HAVE_JUMP_LABEL
is never defined.)
Fixes: 971502d77f ("bridge: netfilter: unroll NF_HOOK helper in bridge input path")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260127101925.1754425-1-martin@kaiser.cx
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip_fib_metrics_init() is only called from fib_create_info()
and ip6_route_info_create().
Let's use EXPORT_IPV6_MOD_GPL() instead.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260127081335.646666-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
tcp: make tcp_ack() faster
Move tcp_rack_update_reo_wnd() and tcp_rack_advance() to tcp_input.c
to allow their (auto)inlining.
No functional change in this series.
====================
Link: https://patch.msgid.link/20260127032147.3498272-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_rack_advance() is called from tcp_ack() and tcp_sacktag_one().
Moving it to tcp_input.c allows the compiler to inline it and save
both space and cpu cycles in TCP fast path.
$ scripts/bloat-o-meter -t vmlinux.1 vmlinux.2
add/remove: 0/2 grow/shrink: 1/1 up/down: 98/-132 (-34)
Function old new delta
tcp_ack 5741 5839 +98
tcp_sacktag_one 407 395 -12
__pfx_tcp_rack_advance 16 - -16
tcp_rack_advance 104 - -104
Total: Before=22572680, After=22572646, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260127032147.3498272-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_rack_update_reo_wnd() is called only once from tcp_ack()
Move it to tcp_input.c so that it can be inlined by the compiler
to save space and cpu cycles.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 1/0 up/down: 110/-153 (-43)
Function old new delta
tcp_ack 5631 5741 +110
__pfx_tcp_rack_update_reo_wnd 16 - -16
tcp_rack_update_reo_wnd 137 - -137
Total: Before=22572723, After=22572680, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260127032147.3498272-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is unlikely we have to call tcp_process_tlp_ack().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260127032147.3498272-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luis Gerhorst says:
====================
bpf: Fix verifier_bug_if to account for BPF_CALL
This fixes the verifier_bug_if() that runs on nospec_result to not trigger
for BPF_CALL (bug reported by Hu, Mei, and Mu). See patch 1 for a full
description and patch 2 for a test (based on the PoC from the report).
While working on this I noticed two other problems:
- nospec_result is currently ignored for BPF_CALL during patching, but it
may be required if we assume the CPU may speculate into/out of functions.
- Both the instruction patching for nospec and nospec_result erases the
instruction aux information even thought it might be better to keep that.
For nospec_result it may be fine as it is only applied to store
instructions currently (except for when we decide to change the thing
from above), but nospec may be set for arbitrary instructions and if
these require rewrites they break.
I assume these issues are better fixed separately, thus I decided to
exclude them from this series.
====================
Link: https://patch.msgid.link/20260127115912.3026761-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF verifier assumes `insn_aux->nospec_result` is only set for
direct memory writes (e.g., `*(u32*)(r1+off) = r2`). However, the
assertion fails to account for helper calls (e.g.,
`bpf_skb_load_bytes_relative`) that perform writes to stack memory. Make
the check more precise to resolve this.
The problem is that `BPF_CALL` instructions have `BPF_CLASS(insn->code)
== BPF_JMP`, which triggers the warning check:
- Helpers like `bpf_skb_load_bytes_relative` write to stack memory
- `check_helper_call()` loops through `meta.access_size`, calling
`check_mem_access(..., BPF_WRITE)`
- `check_stack_write()` sets `insn_aux->nospec_result = 1`
- Since `BPF_CALL` is encoded as `BPF_JMP | BPF_CALL`, the warning fires
Execution flow:
```
1. Drop capabilities → Enable Spectre mitigation
2. Load BPF program
└─> do_check()
├─> check_cond_jmp_op() → Marks dead branch as speculative
│ └─> push_stack(..., speculative=true)
├─> pop_stack() → state->speculative = 1
├─> check_helper_call() → Processes helper in dead branch
│ └─> check_mem_access(..., BPF_WRITE)
│ └─> insn_aux->nospec_result = 1
└─> Checks: state->speculative && insn_aux->nospec_result
└─> BPF_CLASS(insn->code) == BPF_JMP → WARNING
```
To fix the assert, it would be nice to be able to reuse
bpf_insn_successors() here, but bpf_insn_successors()->cnt is not
exactly what we want as it may also be 1 for BPF_JA. Instead, we could
check opcode_info.can_jump, but then we would have to share the table
between the functions. This would mean moving the table out of the
function and adding bpf_opcode_info(). As the verifier_bug_if() only
runs for insns with nospec_result set, the impact on verification time
would likely still be negligible. However, I assume sharing
bpf_opcode_info() between liveness.c and verifier.c will not be worth
it. It seems as only adjust_jmp_off() could also be simplified using it,
and there imm/off is touched. Thus it is maybe better to rely on exact
opcode/class matching there.
Therefore, to avoid this sharing only for a verifier_bug_if(), just
check the opcode. This should now cover all opcodes for which can_jump
in bpf_insn_successors() is true.
Parts of the description and example are taken from the bug report.
Fixes: dadb59104c ("bpf: Fix aux usage after do_check_insn()")
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Reported-by: Dongliang Mu <dzm91@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/7678017d-b760-4053-a2d8-a6879b0dbeeb@hust.edu.cn/
Link: https://lore.kernel.org/r/20260127115912.3026761-2-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allocate and initialize the NVM structure using a local pointer and
assign it to xe->nvm only after all initialization steps succeed.
This avoids exposing a partially initialized xe->nvm and removes the
need to explicitly clear xe->nvm on error paths, simplifying error
handling and making the lifetime rules clearer.
Cc: Alexander Usyskin <alexander.usyskin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Brian Nguyen <brian3.nguyen@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Brian Nguyen <brian3.nguyen@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260120183239.2966782-8-shuicheng.lin@intel.com
After a successful auxiliary_device_init(), aux_dev->dev.release
(xe_nvm_release_dev()) is responsible for the kfree(nvm). When
there is failure with auxiliary_device_add(), driver will call
auxiliary_device_uninit(), which call put_device(). So that the
.release callback will be triggered to free the memory associated
with the auxiliary_device.
Move the kfree(nvm) into the auxiliary_device_init() failure path
and remove the err goto path to fix below error.
"
[ 13.232905] ==================================================================
[ 13.232911] BUG: KASAN: double-free in xe_nvm_init+0x751/0xf10 [xe]
[ 13.233112] Free of addr ffff888120635000 by task systemd-udevd/273
[ 13.233120] CPU: 8 UID: 0 PID: 273 Comm: systemd-udevd Not tainted 6.19.0-rc2-lgci-xe-kernel+ #225 PREEMPT(voluntary)
...
[ 13.233125] Call Trace:
[ 13.233126] <TASK>
[ 13.233127] dump_stack_lvl+0x7f/0xc0
[ 13.233132] print_report+0xce/0x610
[ 13.233136] ? kasan_complete_mode_report_info+0x5d/0x1e0
[ 13.233139] ? xe_nvm_init+0x751/0xf10 [xe]
...
"
v2: drop err goto path. (Alexander)
Fixes: d4c3ed963e ("drm/xe: defer free of NVM auxiliary container to device release callback")
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Brian Nguyen <brian3.nguyen@intel.com>
Cc: Alexander Usyskin <alexander.usyskin@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Suggested-by: Brian Nguyen <brian3.nguyen@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260120183239.2966782-7-shuicheng.lin@intel.com
Move pci_dev_put() after pci_dbg() to avoid using pdev after dropping its
reference.
Fixes: 2674f1ef29 ("drm/xe/configfs: Block runtime attribute changes")
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260121173750.3090907-2-shuicheng.lin@intel.com
Adopt the scoped forcewake management using CLASS(xe_force_wake, ...)
to simplify the code and ensure proper resource release.
Cc: Xin Wang <x.wang@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Xin Wang <x.wang@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20260123180425.3262944-2-shuicheng.lin@intel.com
When a bcache device is detached, discard requests are completed
immediately. However, the I/O accounting started in
cached_dev_make_request() is not ended, leading to 100% disk
utilization reports in iostat. Add the missing bio_end_io_acct() call.
Fixes: cafe563591 ("bcache: A block layer cache")
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Acked-by: Coly Li <colyli@fnnas.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_alloc_clone() with GFP_NOIO and a mempool will not return NULL.
Remove the unnecessary NULL check.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
I realized that these files were never listed in MAINTAINERS when they
were added in commit ad37bcd965 ("rust: add tracepoint support").
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20260127-jump-label-rust-maintainers-v2-1-11b7c30b11d9@google.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The macros ENABLE_EVENT_STR and DISABLE_EVENT_STR were added to trace.h so
that more than one file can have access to them, but was never removed
from their original location. Remove the duplicates.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260126130037.4ba201f9@gandalf.local.home
Fixes: d0bad49bb0 ("tracing: Add enable_hist/disable_hist triggers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Recording stacktraces is very useful, but the size of 16 deep is very
restrictive. For example, in seeing where tasks schedule out in a non
running state, the following can be used:
~# cd /sys/kernel/tracing
~# echo 'hist:keys=common_stacktrace:vals=hitcount if prev_state & 3' > events/sched/sched_switch/trigger
~# cat events/sched/sched_switch/hist
[..]
{ common_stacktrace:
__schedule+0xdc0/0x1860
schedule+0x27/0xd0
schedule_timeout+0xb5/0x100
wait_for_completion+0x8a/0x140
xfs_buf_iowait+0x20/0xd0 [xfs]
xfs_buf_read_map+0x103/0x250 [xfs]
xfs_trans_read_buf_map+0x161/0x310 [xfs]
xfs_btree_read_buf_block+0xa0/0x120 [xfs]
xfs_btree_lookup_get_block+0xa3/0x1e0 [xfs]
xfs_btree_lookup+0xea/0x530 [xfs]
xfs_alloc_fixup_trees+0x72/0x570 [xfs]
xfs_alloc_ag_vextent_size+0x67f/0x800 [xfs]
xfs_alloc_vextent_iterate_ags.constprop.0+0x52/0x230 [xfs]
xfs_alloc_vextent_start_ag+0x9d/0x1b0 [xfs]
xfs_bmap_btalloc+0x2af/0x680 [xfs]
xfs_bmapi_allocate+0xdb/0x2c0 [xfs]
} hitcount: 1
[..]
The above stops at 16 functions where knowing more would be useful. As the
allocated storage for stacks is the same for strings, and that size is 256
bytes, there is a lot of space not being used for stacktraces.
16 * 8 = 128
Up the size to 31 (it requires the last slot to be zero, so it can't be 32).
Also change the BUILD_BUG_ON() to allow the size of the stacktrace storage
to be equal to the max size. One slot is used to hold the number of
elements in the stack.
BUILD_BUG_ON((HIST_STACKTRACE_DEPTH + 1) * sizeof(long) >= STR_VAR_LEN_MAX);
Change that from ">=" to just ">", as now they are equal.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260123105415.2be26bf4@gandalf.local.home
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When debugging the synthetic events, being able to function trace its
functions is very useful (now that CONFIG_FUNCTION_SELF_TRACING is
available). For some reason trace_event_raw_event_synth() was marked as
"notrace", which was totally unnecessary as all of the tracing directory
had function tracing disabled until the recent FUNCTION_SELF_TRACING was
added.
Remove the notrace annotation from trace_event_raw_event_synth() as
there's no reason to not trace it when tracing synthetic event functions.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260122204526.068a98c9@gandalf.local.home
Acked-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When CONFIG_HIST_TRIGGERS_DEBUG is enabled, each trace event has a
"hist_debug" file that explains the histogram internal data. This is very
useful for debugging histograms.
One bit of data that was missing from this file was what function a
histogram field uses to process its data. The hist_field structure now has
a fn_num that is used by a switch statement in hist_fn_call() to call a
function directly (to avoid spectre mitigations).
Instead of displaying that number, create a string array that maps to the
histogram function enums so that the function for a field may be
displayed:
~# cat /sys/kernel/tracing/events/sched/sched_switch/hist_debug
[..]
hist_data: 0000000043d62762
n_vals: 2
n_keys: 1
n_fields: 3
val fields:
hist_data->fields[0]:
flags:
VAL: HIST_FIELD_FL_HITCOUNT
type: u64
size: 8
is_signed: 0
function: hist_field_counter()
hist_data->fields[1]:
flags:
HIST_FIELD_FL_VAR
var.name: __arg_3921_2
var.idx (into tracing_map_elt.vars[]): 0
type: unsigned long[]
size: 128
is_signed: 0
function: hist_field_nop()
key fields:
hist_data->fields[2]:
flags:
HIST_FIELD_FL_KEY
ftrace_event_field name: prev_pid
type: pid_t
size: 8
is_signed: 1
function: hist_field_s32()
The "function:" field above is added.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260122203822.58df4d80@gandalf.local.home
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Tested-by: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Merge series from "Miquel Raynal (Schneider Electric)" <miquel.raynal@bootlin.com>:
This series adds support for the QSPI controller available on Renesas
RZ/N1S and RZ/N1D SoC. It has been tested with a custom board (see last
SPI patch for details), but has been tested by Wolfram (thank you!) on
the DB board.
Link: https://lore.kernel.org/linux-devicetree/20260116114852.52948-2-wsa+renesas@sang-engineering.com/
Adding support for this SoC required a few adaptations in the Cadence
QSPI driver. The bulk of the work is in the few last patches. Everything
else is just misc style fixes and improvements which bothered me while I
was wandering.
In order to support all constraints, I sometimes used a new quirk (for
the write protection feature and the "no indirect mode"), and sometimes
used the compatible directly. The ones I thought might not be RZ/N1
specific have been implemented under the form of a quirk, in order to
ease their reuse. The other adaptations, which I believe are more
Renesas specific, have been handled using the compatible. This is all
very arbitrary, and can be discussed.
Merge series from "Sheetal ." <sheetal@nvidia.com>:
This series adds a reg_default_cb callback for REGCACHE_FLAT to provide
defaults for registers not listed in reg_defaults. Defaults are loaded
eagerly during regcache init and the callback can use writeable_reg to
filter valid addresses and avoid holes.
Tegra ASoC drivers set reg_default_cb and add writeable_reg filtering for
AHUB RX holes to prevent invalid addresses from being marked valid.
In enable_boot_kprobe_events(), it returns directly when trace kprobes is
empty, thereby reducing the function's execution time. This function may
otherwise wait for the event_mutex lock for tens of milliseconds on certain
machines, which is unnecessary when trace kprobes is empty.
Link: https://lore.kernel.org/all/20260127053848.108473-1-sunliming@linux.dev/
Signed-off-by: sunliming <sunliming@kylinos.cn>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Xe3p_LPD also needs Wa_13012396614. Update the conditions for that
workaround accordingly.
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20260122-wa_13012396614-xe3p_lpd-v1-1-39d34a3a5b77@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Static analysis issue:
intel_conn_to_vcpi currently checks and asserts vcpi >= 0, as grabbed
from payload->vcpi. But payload->vcpi is a u8, so this is always true.
Remove this unnecessary check.
While we're here, the jump statements in this function are largely
defunct now, so remove those as well.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260123170914.64548-2-jonathan.cavitt@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
When initializing the default cma region, the "cma=" kernel parameter
takes priority over a DT defined linux,cma-default region. Hence, give
the reserved_mem framework the ability to detect this so that the DT
defined cma region can skip initialization accordingly.
Signed-off-by: Oreoluwa Babatunde <oreoluwa.babatunde@oss.qualcomm.com>
Tested-by: Joy Zou <joy.zou@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Fixes: 8a6e02d0c0 ("of: reserved_mem: Restructure how the reserved memory regions are processed")
Fixes: 2c223f7239 ("of: reserved_mem: Restructure call site for dma_contiguous_early_fixup()")
Link: https://lore.kernel.org/r/20251210002027.1171519-1-oreoluwa.babatunde@oss.qualcomm.com
[mszyprow: rebased onto v6.19-rc1, added fixes tags, added a stub for
cma_skip_dt_default_reserved_mem() if no CONFIG_DMA_CMA is set]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
The list of transaction is enumerated without acquiring card lock when
processing AR response event. This causes a race condition bug when
processing AT request completion event concurrently.
This commit fixes the bug by put timer start for split transaction
expiration into the scope of lock. The value of jiffies in card structure
is referred before acquiring the lock.
Cc: stable@vger.kernel.org # v6.18
Fixes: b5725cfa41 ("firewire: core: use spin lock specific to timer for split transaction")
Reported-by: Andreas Persson <andreasp56@outlook.com>
Closes: https://github.com/alsa-project/snd-firewire-ctl-services/issues/209
Tested-by: Andreas Persson <andreasp56@outlook.com>
Link: https://lore.kernel.org/r/20260127223413.22265-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The xfstests' test-case generic/062 fails to execute
correctly:
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.15.0-rc4+ #8 SMP PREEMPT_DYNAMIC Thu May 1 16:43:22 PDT 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/062 - output mismatch (see xfstests-dev/results//generic/062.out.bad)
The generic/062 test tries to set and get xattrs for various types
of objects (regular file, folder, block device, character
device, pipe, etc) with the goal to check that xattr operations
works correctly for all possible types of file system objects.
But current HFS+ implementation somehow hasn't support of
xattr operatioons for the case of block device, character
device, and pipe objects. Also, it has not completely correct
set of operations for the case symlinks.
This patch implements proper declaration of xattrs operations
hfsplus_special_inode_operations and hfsplus_symlink_inode_operations.
Also, it slightly corrects the logic of hfsplus_listxattr()
method.
sudo ./check generic/062
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.19.0-rc1+ #59 SMP PREEMPT_DYNAMIC Mon Jan 19 16:26:21 PST 2026
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch
generic/062 20s ... 20s
Ran: generic/062
Passed all 1 tests
[1] https://github.com/hfs-linux-kernel/hfs-linux-kernel/issues/93
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20260120041937.3450928-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Anlogic:
Minor change to the extension information, to add the "b" extension
that's a catch-all for 3 of the extensions already in the dts.
Starfive:
Append the jh7110 compatible to jh7110s devicetrees, as that will enable
OpenSBI etc to run without adding support for this minor variant. The
"s" device differs from the non "s" device only in
thermal limits and voltage/frequency characteristics.
Microchip:
Redo the mpfs clock setup yet again, to something approaching correct.
The original binding conjured up for the platform was wildly inaccurate,
and even with the original improvements, a bigger change to using
syscons was required to support several peripherals that also inhabit
the memory regions that the clocks lie in. The damage to the dts isn't
that bad in the end, and of course the whole thing has been done in a
backwards compatible manner, with the code changes being merged a cycle
or two ago in the kernel and like a year ago in U-Boot (the only other
user that I am aware of).
Generic:
Additions to extensions.yaml, mainly for things in the "rva23" profile
that appear for the first time on the Spacemit K3 SoC.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCaXpxIgAKCRB4tDGHoIJi
0mQcAQC8QEci1lhxDUJvMW2DdvDnM2l/D4Fw6XUMHB3AkoaWIgD+MqhU0LzES8wG
IxdJN2WzaaOAVE83zMaSgpdi5Y497wU=
=Ntyt
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAml6j9oACgkQmmx57+YA
GNmQWRAAmQ3cmwtY+HyZazjBuSlGBdWeziq9LQcTz7I58PO3M+8bR8AiQ2SjBHsL
iYd7oezxjC7CIOXarwgX/HFS60G0d3rpWqAr1bxBsO+tWAiswQiE8/KVCWuY31ER
Gq4ulAT3TrIYt5PNbAkKSM6csXZ8/NCORC/XQb7zk7LjQCg+H4ny7cE8//klXmCx
BMAIb2RoCJSzIBjFLz9eS404l+GNnqVBXbxtvbQZUCHuAJWUns3yVnod4IPzVc9e
APc2gDRHbRL/iGprVvD4yeZ/7x5GYpi8MR4W9nvvSxKvbhn5+ZOFN0e8LGBZuN2I
XdLqdyZ8NYB7c8V3KIoTkrO68A/mBuQHjSI0UfyW2qUSQ52ZWmY/Q0H/+N1cHZCo
/Rpqly6lIwICRzVEc84OfIikM0pEfg8QmDmcdzn8EppULV49natkoTgxIPkqdAsz
yOEPYa8zLH/G8PdVNe84ZCn4D/BM1Iu4Y4Z/t2Ib+Vr3Ai8ZP96ZoHuc+JPzvunW
F2lIdQ3AZhD+7HX2pyXWH7sZSKNc747AE5cEpnH+3WndF9XCPG8mFNvxOR17pFS+
YGWk91YMOnfpq+P51l9M8whhRTYNav/M411dY7pgLx9UCsheXotdRrqrfYHAEFS7
gCLAR4W1wXnVDFMRHQ8OJiaT8vPlrVbpSy1S+OuCo6nIFpFDO4g=
=58in
-----END PGP SIGNATURE-----
Merge tag 'riscv-dt-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into soc/dt
RISC-V Devicetrees for v6.20 (or v7.0)
Anlogic:
Minor change to the extension information, to add the "b" extension
that's a catch-all for 3 of the extensions already in the dts.
Starfive:
Append the jh7110 compatible to jh7110s devicetrees, as that will enable
OpenSBI etc to run without adding support for this minor variant. The
"s" device differs from the non "s" device only in
thermal limits and voltage/frequency characteristics.
Microchip:
Redo the mpfs clock setup yet again, to something approaching correct.
The original binding conjured up for the platform was wildly inaccurate,
and even with the original improvements, a bigger change to using
syscons was required to support several peripherals that also inhabit
the memory regions that the clocks lie in. The damage to the dts isn't
that bad in the end, and of course the whole thing has been done in a
backwards compatible manner, with the code changes being merged a cycle
or two ago in the kernel and like a year ago in U-Boot (the only other
user that I am aware of).
Generic:
Additions to extensions.yaml, mainly for things in the "rva23" profile
that appear for the first time on the Spacemit K3 SoC.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-for-v6.20' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: anlogic: dr1v90: Add "b" ISA extension
dt-bindings: riscv: extensions: Drop unnecessary select schema
dt-bindings: riscv: Add Sha and its comprised extensions
dt-bindings: riscv: Add Ssccptr, Sscounterenw, Sstvala, Sstvecd, Ssu64xl
dt-bindings: riscv: Add descriptions for Za64rs, Ziccamoa, Ziccif, and Zicclsm
dt-bindings: riscv: Add B ISA extension description
dt-bindings: riscv: update ratified version of h, svinval, svnapot, svpbmt
riscv: dts: starfive: Append JH-7110 SoC compatible to VisionFive 2 Lite eMMC board
riscv: dts: starfive: Append JH-7110 SoC compatible to VisionFive 2 Lite board
dt-bindings: riscv: starfive: Append JH-7110 SoC compatible to VisionFive 2 Lite board
riscv: dts: microchip: convert clock and reset to use syscon
riscv: dts: microchip: fix mailbox description
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Define compatible strings for Realtek RTD1501s, RTD1861b and RTD1920s.
Additionally, convert legacy DTS-style comments to YAML description
properties, following the pattern from the ARM bindings conversion series
[1].
[1] https://lore.kernel.org/lkml/20200622125527.24207-2-afaerber@suse.de/
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20260127071530.25426-2-eleanor15x@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The EXEC_COUNT field must be > 0. In the gfx shadow
handling we always emit a cond_exec packet after the gfx_shadow
packet, but the EXEC_COUNT never gets patched. This leads
to a hang when we try and reset queues on gfx11 APUs.
Fixes: c68cbbfd54 ("drm/amdgpu: cleanup conditional execution")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ba205ac3d6)
Cc: stable@vger.kernel.org
When building selftests/bpf with EXTRA_LDFLAGS=-static the follwoing
error happens:
LINK /ws/linux/tools/testing/selftests/bpf/tools/build/bpftool/bootstrap/bpftool
/usr/bin/x86_64-linux-gnu-ld.bfd: /usr/lib/gcc/x86_64-linux-gnu/15/../../../x86_64-linux-gnu/libcrypto.a(libcrypto-lib-dso_dlfcn.o): in function `dlfcn_globallookup':
[...]
/usr/bin/x86_64-linux-gnu-ld.bfd: /usr/lib/gcc/x86_64-linux-gnu/15/../../../x86_64-linux-gnu/libcrypto.a(libcrypto-lib-c_zlib.o): in function `zlib_oneshot_expand_block':
(.text+0xc64): undefined reference to `uncompress'
/usr/bin/x86_64-linux-gnu-ld.bfd: /usr/lib/gcc/x86_64-linux-gnu/15/../../../x86_64-linux-gnu/libcrypto.a(libcrypto-lib-c_zlib.o): in function `zlib_oneshot_compress_block':
(.text+0xce4): undefined reference to `compress'
collect2: error: ld returned 1 exit status
make[1]: *** [Makefile:252: /ws/linux/tools/testing/selftests/bpf/tools/build/bpftool/bootstrap/bpftool] Error 1
make: *** [Makefile:327: /ws/linux/tools/testing/selftests/bpf/tools/sbin/bpftool] Error 2
make: *** Waiting for unfinished jobs....
This is caused by wrong order of dependencies in the Makefile. Fix it.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260128211255.376933-1-ihor.solodrai@linux.dev
cpufreq calls get_cpu_idle_time_us() just to know if idle cputime
accounting has a nanoseconds granularity.
Use the appropriate indicator instead to make that deduction.
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://patch.msgid.link/aXozx0PXutnm8ECX@localhost.localdomain
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to the Linux kernel ABI documentation for 'scaling_setspeed':
"It returns the last frequency requested by the governor (in kHz) or
can be written to in order to set a new frequency for the policy."
However, the current implementation of show_speed() returns 'policy->cur'.
'policy->cur' represents the frequency after the driver has
resolved the request against the hardware frequency table and applied
policy limits (min/max).
This creates a discrepancy between the documentation/user expectation
and the actual code behavior. For instance:
1. User writes a value to 'scaling_setspeed' that is not in the OPP
table (e.g., user asks for A, driver rounds it to B).
2. User reads 'scaling_setspeed'.
3. Code returns B ('policy->cur').
4. User expects A (the "frequency requested"), but gets B.
This patch changes show_speed() to return 'userspace->setspeed', which
stores the actual value last requested by the user. This restores the
read/write symmetry of the attribute and aligns the code with the ABI
description.
The effective frequency can still be observed via 'scaling_cur_freq' or
'cpuinfo_cur_freq', preserving the distinction between "what was
requested" (setspeed) and "what is effective" (cur_freq).
Signed-off-by: Pengjie Zhang <zhangpengjie2@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: lihuisong@huawei.com
Link: https://patch.msgid.link/20260116094623.2980031-1-zhangpengjie2@huawei.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The verification signature header generation requires converting a
binary certificate to a C array. Previously this only worked with
xxd (part of vim-common package).
As xxd may not be available on some systems building selftests, it makes
sense to substitute it with more common utils: hexdump, wc, sed to
generate equivalent C array output.
Tested by generating header with both xxd and hexdump and comparing
them.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20260128190552.242335-1-mykyta.yatsenko5@gmail.com
The EXEC_COUNT field must be > 0. In the gfx shadow
handling we always emit a cond_exec packet after the gfx_shadow
packet, but the EXEC_COUNT never gets patched. This leads
to a hang when we try and reset queues on gfx11 APUs.
Fixes: c68cbbfd54 ("drm/amdgpu: cleanup conditional execution")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The reference clock is supposed to be 100Mhz, but it
appears to actually be slightly lower (99.81Mhz).
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/14451
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A trap may occur in the middle of VOP3PX instruction co-issue.
The PC would be restored incorrectly if left unmodified.
Identify this case by examining the instruction opcode and
rewind the PC 8 bytes if it occurs.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Reviewed-by: Vladimir Indic <vladimir.indic@amd.com>
Cc: Shweta Khatri <shweta.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If SMU is disabled, during RAS initialization,
there will be null pointer dereference issue here.
Signed-off-by: Jinzhou Su <jinzhou.su@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since acomp_request_free() checks its argument against NULL, the NULL
pointer checks before calling it added by commit ("7966cf0ebe PM:
hibernate: Fix crash when freeing invalid crypto compressor") are
redundant, so drop them.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6233709.lOV4Wx5bFT@rafael.j.wysocki
In thermal_of_cm_lookup(), tr_np is obtained via of_parse_phandle(), but
never released.
Use the __free(device_node) cleanup attribute to automatically release
the node and fix the leak.
Fixes: 423de5b5bc ("thermal/of: Fix cdev lookup in thermal_of_should_bind()")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
[ rjw: Changelog edits ]
Link: https://patch.msgid.link/20260124-thermal_of-v1-1-54d3416948cf@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
