Bernd has reported a lockdep splat from flexible proportions code that is
essentially complaining about the following race:
<timer fires>
run_timer_softirq - we are in softirq context
call_timer_fn
writeout_period
fprop_new_period
write_seqcount_begin(&p->sequence);
<hardirq is raised>
...
blk_mq_end_request()
blk_update_request()
ext4_end_bio()
folio_end_writeback()
__wb_writeout_add()
__fprop_add_percpu_max()
if (unlikely(max_frac < FPROP_FRAC_BASE)) {
fprop_fraction_percpu()
seq = read_seqcount_begin(&p->sequence);
- sees odd sequence so loops indefinitely
Note that a deadlock like this is only possible if the bdi has configured
maximum fraction of writeout throughput which is very rare in general but
frequent for example for FUSE bdis. To fix this problem we have to make
sure write section of the sequence counter is irqsafe.
Link: https://lkml.kernel.org/r/20260121112729.24463-2-jack@suse.cz
Fixes: a91befde35 ("lib/flex_proportions.c: remove local_irq_ops in fprop_new_period()")
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Bernd Schubert <bernd@bsbernd.com>
Link: https://lore.kernel.org/all/9b845a47-9aee-43dd-99bc-1a82bea00442@bsbernd.com/
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Joanne Koong <joannelkoong@gmail.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Map my address <adeep@lexina.in> to new personal address <v@baodeep.com>
Old domain lexina.in will no longer be accessible due to registration
expiration.
Link: https://lkml.kernel.org/r/20260120082212.364268-1-adeep@lexina.in
Signed-off-by: Viacheslav Bocharov <adeep@lexina.in>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a hugetlb folio is being poisoned again, try_memory_failure_hugetlb()
passed head pfn to kill_accessing_process(), that is not right. The
precise pfn of the poisoned page should be used in order to determine the
precise vaddr as the SIGBUS payload.
This issue has already been taken care of in the normal path, that is,
hwpoison_user_mappings(), see [1][2]. Further more, for [3] to work
correctly in the hugetlb repoisoning case, it's essential to inform VM the
precise poisoned page, not the head page.
[1] https://lkml.kernel.org/r/20231218135837.3310403-1-willy@infradead.org
[2] https://lkml.kernel.org/r/20250224211445.2663312-1-jane.chu@oracle.com
[3] https://lore.kernel.org/lkml/20251116013223.1557158-1-jiaqiyan@google.com/
Link: https://lkml.kernel.org/r/20260120232234.3462258-2-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Chris Mason <clm@meta.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: William Roche <william.roche@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a newly poisoned subpage ends up in an already poisoned hugetlb
folio, 'num_poisoned_pages' is incremented, but the per node ->mf_stats is
not. Fix the inconsistency by designating action_result() to update them
both.
While at it, define __get_huge_page_for_hwpoison() return values in terms
of symbol names for better readibility. Also rename
folio_set_hugetlb_hwpoison() to hugetlb_update_hwpoison() since the
function does more than the conventional bit setting and the fact three
possible return values are expected.
Link: https://lkml.kernel.org/r/20260120232234.3462258-1-jane.chu@oracle.com
Fixes: 18f41fa616 ("mm: memory-failure: bump memory failure stats to pglist_data")
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Chris Mason <clm@meta.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: William Roche <william.roche@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit 8b47299a41 ("mm, swap: mark swap address space ro and add context
debug check") made the swap address space read-only. It may lead to
kernel panic if arch_prepare_to_swap returns a failure under heavy memory
pressure as follows,
el1_abort+0x40/0x64
el1h_64_sync_handler+0x48/0xcc
el1h_64_sync+0x84/0x88
errseq_set+0x4c/0xb8 (P)
__filemap_set_wb_err+0x20/0xd0
shrink_folio_list+0xc20/0x11cc
evict_folios+0x1520/0x1be4
try_to_shrink_lruvec+0x27c/0x3dc
shrink_one+0x9c/0x228
shrink_node+0xb3c/0xeac
do_try_to_free_pages+0x170/0x4f0
try_to_free_pages+0x334/0x534
__alloc_pages_direct_reclaim+0x90/0x158
__alloc_pages_slowpath+0x334/0x588
__alloc_frozen_pages_noprof+0x224/0x2fc
__folio_alloc_noprof+0x14/0x64
vma_alloc_zeroed_movable_folio+0x34/0x44
do_pte_missing+0xad4/0x1040
handle_mm_fault+0x4a4/0x790
do_page_fault+0x288/0x5f8
do_translation_fault+0x38/0x54
do_mem_abort+0x54/0xa8
Restore swap address space as not ro to avoid the panic.
Link: https://lkml.kernel.org/r/20260116062535.306453-2-robin.kuo@mediatek.com
Fixes: 8b47299a41 ("mm, swap: mark swap address space ro and add context debug check")
Signed-off-by: robin.kuo <robin.kuo@mediatek.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: andrew.yang <andrew.yang@mediatek.com>
Cc: AngeloGiaocchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Mathias Brugger <matthias.bgg@gmail.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Qun-wei Lin <Qun-wei.Lin@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A KASAN warning can be triggered when vrealloc() changes the requested
size to a value that is not aligned to KASAN_GRANULE_SIZE.
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1 at mm/kasan/shadow.c:174 kasan_unpoison+0x40/0x48
...
pc : kasan_unpoison+0x40/0x48
lr : __kasan_unpoison_vmalloc+0x40/0x68
Call trace:
kasan_unpoison+0x40/0x48 (P)
vrealloc_node_align_noprof+0x200/0x320
bpf_patch_insn_data+0x90/0x2f0
convert_ctx_accesses+0x8c0/0x1158
bpf_check+0x1488/0x1900
bpf_prog_load+0xd20/0x1258
__sys_bpf+0x96c/0xdf0
__arm64_sys_bpf+0x50/0xa0
invoke_syscall+0x90/0x160
Introduce a dedicated kasan_vrealloc() helper that centralizes KASAN
handling for vmalloc reallocations. The helper accounts for KASAN granule
alignment when growing or shrinking an allocation and ensures that partial
granules are handled correctly.
Use this helper from vrealloc_node_align_noprof() to fix poisoning logic.
[ryabinin.a.a@gmail.com: move kasan_enabled() check, fix build]
Link: https://lkml.kernel.org/r/20260119144509.32767-1-ryabinin.a.a@gmail.com
Link: https://lkml.kernel.org/r/20260113191516.31015-1-ryabinin.a.a@gmail.com
Fixes: d699440f58 ("mm: fix vrealloc()'s KASAN poisoning logic")
Signed-off-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Reported-by: <joonki.min@samsung-slsi.corp-partner.google.com>
Closes: https://lkml.kernel.org/r/CANP3RGeuRW53vukDy7WDO3FiVgu34-xVJYkfpm08oLO3odYFrA@mail.gmail.com
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Uladzislau Rezki <urezki@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The helper for shmem swap freeing is not handling the order of swap
entries correctly. It uses xa_cmpxchg_irq to erase the swap entry, but it
gets the entry order before that using xa_get_order without lock
protection, and it may get an outdated order value if the entry is split
or changed in other ways after the xa_get_order and before the
xa_cmpxchg_irq.
And besides, the order could grow and be larger than expected, and cause
truncation to erase data beyond the end border. For example, if the
target entry and following entries are swapped in or freed, then a large
folio was added in place and swapped out, using the same entry, the
xa_cmpxchg_irq will still succeed, it's very unlikely to happen though.
To fix that, open code the Xarray cmpxchg and put the order retrieval and
value checking in the same critical section. Also, ensure the order won't
exceed the end border, skip it if the entry goes across the border.
Skipping large swap entries crosses the end border is safe here. Shmem
truncate iterates the range twice, in the first iteration,
find_lock_entries already filtered such entries, and shmem will swapin the
entries that cross the end border and partially truncate the folio (split
the folio or at least zero part of it). So in the second loop here, if we
see a swap entry that crosses the end order, it must at least have its
content erased already.
I observed random swapoff hangs and kernel panics when stress testing
ZSWAP with shmem. After applying this patch, all problems are gone.
Link: https://lkml.kernel.org/r/20260120-shmem-swap-fix-v3-1-3d33ebfbc057@tencent.com
Fixes: 809bc86517 ("mm: shmem: support large folio swap out")
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename the non static intel_clear_response_ready_flag to
intel_cx0_clear_response_ready_flag so that we follow the
naming standards of non static function.
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
Link: https://patch.msgid.link/20260122044859.753682-2-suraj.kandpal@intel.com
Clear the response ready and error bit of PORT_P2M_MESSAGE_BUS_STATUS
before writing the transaction pending bit of
PORT_M2P_MSGBUS_CTL as that is a hard requirement. If not done
we find that the PHY hangs since it ends up in a weird state if left
idle for more than 1 hour.
Bspec: 65101
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260122044859.753682-1-suraj.kandpal@intel.com
Justin Chen says:
====================
code clean up
Clean up and streamlined some code that is no longer needed due to
older HW support being dropped.
====================
Link: https://patch.msgid.link/20260122194949.1145107-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Streamline the bcmasp_probe early exit. As support for other
functionality is added(i.e. ptp), it is easier to keep track of early
exit cleanup when it is all in one place.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260122194949.1145107-3-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Removed wol_irq check. This was needed for brcm,asp-v2.0, which was
removed in previous commits.
Removed bcmasp_intf_ops. These function pointers were added to make
it easier to implement pseudo channels. These channels were removed
in newer versions of the hardware and were never implemented.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260122194949.1145107-2-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On 64bit arches, struct u64_stats_sync is empty and provides no help
against load/store tearing. Convert to u64_stats_t to ensure atomic
operations.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260122185113.2760355-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexis Lothoré says:
====================
selftests/bpf: migrate a few bpftool testing scripts
this is the v4 for some bpftool tests conversion. The new tests are
being integrated in test_progs so that they can be executed on each CI
run.
- First commit introduces a few dedicated helpers to execute bpftool
commands, with or without retrieving the generated stdout output
- Second commit integrates test_bpftool_metadata.sh into test_progs
- Third commit integrates test_bpftool_map.sh into test_progs
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
---
Changes in v4:
- Port missing map access test in bpftool_metadata
- Link to v3: https://lore.kernel.org/r/20260121-bpftool-tests-v3-0-368632f377e5@bootlin.com
Changes in v3:
- Drop commit reordering objects in Makefile
- Rebased series on ci/bpf-next_base to fix conflict
- Link to v2: https://lore.kernel.org/r/20260121-bpftool-tests-v2-0-64edb47e91ae@bootlin.com
Changes in v2:
- drop standalone runner in favor of test_progs
- Link to v1: https://lore.kernel.org/r/20260114-bpftool-tests-v1-0-cfab1cc9beaf@bootlin.com
====================
Link: https://patch.msgid.link/20260123-bpftool-tests-v4-0-a6653a7f28e7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_bpftool_map.sh script tests that maps read/write accesses
are being properly allowed/refused by the kernel depending on a specific
fmod_ret program being attached on security_bpf_map function.
Rewrite this test to integrate it in the test_progs. The
new test spawns a few subtests:
#36/1 bpftool_maps_access/unprotected_unpinned:OK
#36/2 bpftool_maps_access/unprotected_pinned:OK
#36/3 bpftool_maps_access/protected_unpinned:OK
#36/4 bpftool_maps_access/protected_pinned:OK
#36/5 bpftool_maps_access/nested_maps:OK
#36/6 bpftool_maps_access/btf_list:OK
#36 bpftool_maps_access:OK
Summary: 1/6 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/r/20260123-bpftool-tests-v4-3-a6653a7f28e7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_bpftool_metadata.sh script validates that bpftool properly
returns in its ouptput any metadata generated by bpf programs through
some .rodata sections.
Port this test to the test_progs framework so that it can be executed
automatically in CI. The new test, similarly to the former script,
checks that valid data appears both for textual output and json output,
as well as for both data not used at all and used data. For the json
check part, the expected json string is hardcoded to avoid bringing a
new external dependency (eg: a json deserializer) for test_progs.
As the test is now converted into test_progs, remove the former script.
The newly converted test brings two new subtests:
#37/1 bpftool_metadata/metadata_unused:OK
#37/2 bpftool_metadata/metadata_used:OK
#37 bpftool_metadata:OK
Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20260123-bpftool-tests-v4-2-a6653a7f28e7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In order to integrate some bpftool tests into test_progs, define a few
specific helpers that allow to execute bpftool commands, while possibly
retrieving the command output. Those helpers most notably set the
path to the bpftool binary under test. This version checks different
possible paths relative to the directories where the different
test_progs runners are executed, as we want to make sure not to
accidentally use a bootstrap version of the binary.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20260123-bpftool-tests-v4-1-a6653a7f28e7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's rare case that sync_inodes_sb() always skips to flush some drity
datas, so it's enough to give extra three more chances to flush data.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Under stress tests with frequent metadata operations, checkpoint write
time can become excessively long. Analysis shows that the slowdown is
caused by synchronous, one-by-one reads of NAT blocks during checkpoint
processing.
The issue can be reproduced with the following workload:
1. seq 1 650000 | xargs -P 16 -n 1 touch
2. sync # avoid checkpoint write during deleting
3. delete 1 file every 455 files
4. echo 3 > /proc/sys/vm/drop_caches
5. sync # trigger checkpoint write
This patch submits read I/O for all NAT blocks required in the
__flush_nat_entry_set() phase in advance, reducing the overhead of
synchronous waiting for individual NAT block reads.
The NAT block flush latency before and after the change is as below:
| |NAT blocks accessed|NAT blocks read|Flush time (ms)|
|-------------|-------------------|---------------|---------------|
|Before change|1205 |1191 |158 |
|After change |1264 |1242 |11 |
With a similar number of NAT blocks accessed and read from disk, adding
NAT block readahead reduces the total NAT block flush time by more than
90%.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
All callers of __has_cursum_space() pass an unsigned int value as the
size parameter. Change the parameter type to unsigned int accordingly.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds separate write latency accounting for NAT and SIT blocks
in f2fs_write_checkpoint().
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
For pinned files, the file mapping is already established before
writing, and since the writes are in IPU, there is no need to acquire
the sbi->writepages lock to guarantee write ordering.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In order to simulate skipped write during enable_checkpoint().
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces sbi->nr_pages[F2FS_SKIPPED_WRITE] to record any
skipped write during data flush in f2fs_enable_checkpoint().
So in the loop of data flush, if there is any skipped write in previous
flush, let's retry sync_inode_sb(), otherwise, all dirty data written
before f2fs_enable_checkpoint() should have been persisted, then break
the retry loop.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
strcpy() has been deprecated [1] because it performs no bounds checking
on the destination buffer, which can lead to buffer overflows. Replace
it with the safer strscpy().
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
68000 has different alignment needs to 68020+.
memcpy() checks if the destination is aligned and does a smaller copy
to fix the alignment and then critically for 68000 it checks if the
source is still unaligned and if it is reverts to smaller copies.
memmove() does not currently do the second part and malfunctions if
one of the pointers is aligned and the other isn't.
This is apparently getting triggered by printk. If I put breakpoints
into the new checks added by this commit the first hit looks like this:
memmove (n=205, src=0x2f3971 <printk_shared_pbufs+205>, dest=0x2f3980 <printk_shared_pbufs+220>) at arch/m68k/lib/memmove.c:82
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Signed-off-by: Greg Ungerer <gerg@kernel.org>
- Drop 'CONFIG_I2C_COMPAT is not set' (removed in commit 7e722083fc
("i2c: Remove I2C_COMPAT config symbol and related code"))
- Drop 'CONFIG_SCHED_DEBUG is not set' (removed in commit b52173065e
("sched/debug: Remove CONFIG_SCHED_DEBUG"))
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
When /proc/sys/kernel/traceoff_on_warning is set to 1, the top level
tracing buffer is disabled when a warning happens. This is very useful
when debugging and want the tracing buffer to stop taking new data when a
warning triggers keeping the events that lead up to the warning from being
overwritten.
Now that there is also a persistent ring buffer and an option to have
trace_printk go to that buffer, the same holds true for that buffer. A
warning could happen just before a crash but still write enough events to
lose the events that lead up to the first warning that was the reason for
the crash.
When /proc/sys/kernel/traceoff_on_warning is set to 1 and a warning is
triggered, not only disable the top level tracing buffer, but also disable
the buffer that trace_printk()s are written to.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260121093858.5c5d7e7b@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
ENTRIES_PER_PAGE_GROUP() returns the number of dyn_ftrace entries in a page
group, identified by its order.
No functional change.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260113152243.3557219-2-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
By doing:
# trace-cmd sqlhist -e -n futex_wait select TIMESTAMP_DELTA_USECS as lat from sys_enter_futex as start join sys_exit_futex as end on start.common_pid = end.common_pid
and
# trace-cmd start -e futex_wait -f 'lat > 100' -e page_pool_state_release -f 'pfn == 1'
The output of the show_event_trigger and show_event_filter files are well
aligned because of the inconsistent 'tab' spacing:
~# cat /sys/kernel/tracing/show_event_triggers
syscalls:sys_exit_futex hist:keys=common_pid:vals=hitcount:__lat_12046_2=common_timestamp.usecs-$__arg_12046_1:sort=hitcount:size=2048:clock=global:onmatch(syscalls.sys_enter_futex).trace(futex_wait,$__lat_12046_2) [active]
syscalls:sys_enter_futex hist:keys=common_pid:vals=hitcount:__arg_12046_1=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active]
~# cat /sys/kernel/tracing/show_event_filters
synthetic:futex_wait (lat > 100)
page_pool:page_pool_state_release (pfn == 1)
This makes it not so easy to read. Instead, force the spacing to be at
least 32 bytes from the beginning (one space if the system:event is longer
than 30 bytes):
~# cat /sys/kernel/tracing/show_event_triggers
syscalls:sys_exit_futex hist:keys=common_pid:vals=hitcount:__lat_8125_2=common_timestamp.usecs-$__arg_8125_1:sort=hitcount:size=2048:clock=global:onmatch(syscalls.sys_enter_futex).trace(futex_wait,$__lat_8125_2) [active]
syscalls:sys_enter_futex hist:keys=common_pid:vals=hitcount:__arg_8125_1=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active]
~# cat /sys/kernel/tracing/show_event_filters
synthetic:futex_wait (lat > 100)
page_pool:page_pool_state_release (pfn == 1)
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260112153408.18373e73@gandalf.local.home
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Avoid running the wakeup irq_work on an isolated CPU. Since the wakeup can
run on any CPU, let's pick a housekeeping CPU to do the job.
This change reduces additional noise when tracing isolated CPUs. For
example, the following ipi_send_cpu stack trace was captured with
nohz_full=2 on the isolated CPU:
<idle>-0 [002] d.h4. 1255.379293: ipi_send_cpu: cpu=2 callsite=irq_work_queue+0x2d/0x50 callback=rb_wake_up_waiters+0x0/0x80
<idle>-0 [002] d.h4. 1255.379329: <stack trace>
=> trace_event_raw_event_ipi_send_cpu
=> __irq_work_queue_local
=> irq_work_queue
=> ring_buffer_unlock_commit
=> trace_buffer_unlock_commit_regs
=> trace_event_buffer_commit
=> trace_event_raw_event_x86_irq_vector
=> __sysvec_apic_timer_interrupt
=> sysvec_apic_timer_interrupt
=> asm_sysvec_apic_timer_interrupt
=> pv_native_safe_halt
=> default_idle
=> default_idle_call
=> do_idle
=> cpu_startup_entry
=> start_secondary
=> common_startup_64
The IRQ work interrupt alone adds considerable noise, but the impact can
get even worse with PREEMPT_RT, because the IRQ work interrupt is then
handled by a separate kernel thread. This requires a task switch and makes
tracing useless for analyzing latency on an isolated CPU.
After applying the patch, the trace is similar, but ipi_send_cpu always
targets a non-isolated CPU.
Unfortunately, irq_work_queue_on() is not NMI-safe. When running in NMI
context, fall back to queuing the irq work on the local CPU.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Clark Williams <clrkwllms@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Link: https://patch.msgid.link/20260108132132.2473515-1-ptesarik@suse.com
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
To audit active event triggers, userspace currently must traverse the
events/ directory and read each individual trigger file. This is
cumbersome for system-wide auditing or debugging.
Introduce "show_event_triggers" at the trace root directory. This file
displays all events that currently have one or more triggers applied,
alongside the trigger configuration, in a consolidated
system:event [tab] trigger format.
The implementation leverages the existing trace_event_file iterators
and uses the trigger's own print() operation to ensure output
consistency with the per-event trigger files.
Link: https://patch.msgid.link/20260105142939.2655342-3-atomlin@atomlin.com
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, to audit active Ftrace event filters, userspace must
recursively traverse the events/ directory and read each individual
filter file. This is inefficient for monitoring tools and debugging.
Introduce "show_event_filters" at the trace root directory. This file
displays all events that currently have a filter applied, alongside the
actual filter string, in a consolidated system:event [tab] filter
format.
The implementation reuses the existing trace_event_file iterators to
ensure atomic traversal of the event list and utilises guard(rcu)() for
automatic, scope-based protection when accessing volatile filter
strings.
Link: https://patch.msgid.link/20260105142939.2655342-2-atomlin@atomlin.com
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This patch continues the effort to refactor workqueue APIs, which has begun
with the changes introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The point of the refactoring is to eventually alter the default behavior of
workqueues to become unbound by default so that their workload placement is
optimized by the scheduler.
Before that to happen after a careful review and conversion of each individual
case, workqueue users must be converted to the better named new workqueues with
no intended behaviour changes:
system_wq -> system_percpu_wq
system_unbound_wq -> system_dfl_wq
This specific workflow has no benefits being per-cpu, so instead of
system_percpu_wq the new unbound workqueue has been used (system_dfl_wq).
This way the old obsolete workqueues (system_wq, system_unbound_wq) can be
removed in the future.
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251230142820.173712-1-marco.crivellari@suse.com
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add support for displaying bitmasks in human-readable list format (e.g.,
0,2-5,7) in addition to the default hexadecimal bitmap representation.
This is particularly useful when tracing CPU masks and other large
bitmasks where individual bit positions are more meaningful than their
hexadecimal encoding.
When the "bitmask-list" option is enabled, the printk "%*pbl" format
specifier is used to render bitmasks as comma-separated ranges, making
trace output easier to interpret for complex CPU configurations and
large bitmask values.
Link: https://patch.msgid.link/20251226160724.2246493-2-atomlin@atomlin.com
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
With the change to replace kfree() with trigger_data_free(), which starts
out doing the exact same thing as event_trigger_reset_filter(), there's no
reason to call event_trigger_reset_filter() before calling
trigger_data_free(). Remove the call to it.
Link: https://lore.kernel.org/linux-trace-kernel/20251211204520.0f3ba6d1@fedora/
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Link: https://patch.msgid.link/20260108174429.2d9ca51f@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Memory allocated with trigger_data_alloc() requires trigger_data_free()
for proper cleanup.
Replace kfree() with trigger_data_free() to fix this.
Found via static analysis and code review.
This isn't a real bug due to the current code basically being an open
coded version of trigger_data_free() without the synchronization. The
synchronization isn't needed as this is the error path of creation and
there's nothing to synchronize against yet. Replace the kfree() to be
consistent with the allocation.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20251211100058.2381268-1-linmq006@gmail.com
Fixes: e1f187d09e ("tracing: Have existing event_command.parse() implementations use helpers")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
On PTL, the recommendation is to disable DCC(Duty Cycle Control) as
it may cause some regressions due to added latencies. Upcoming GuC
releases will disable DCC on PTL as well, but we need to force it in
KMD so that this behavior is propagated to older kernels.
v2: Update commit message (Rodrigo)
v3: Rebase
v4: Fix typo: s/propagted/propagated
Fixes: 5cdb71d3b0 ("drm/xe/ptl: Add GuC FW definition for PTL")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patch.msgid.link/20260124005917.398522-1-vinay.belgaumkar@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 40ee63f5df)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
An LRC timestamp getting stuck is a somewhat normal occurrence. If a
single VF submits a job that does not get timesliced, the LRC timestamp
will not increment. Reduce the LRC timestamp stuck message on VFs to
notice (same log level as job timeout) to avoid false CI bugs in tests
where a VF submits a job that does not get timesliced.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7032
Fixes: bb63e7257e ("drm/xe: Avoid toggling schedule state to check LRC timestamp in TDR")
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://patch.msgid.link/20260114184905.4189026-1-matthew.brost@intel.com
(cherry picked from commit e89aacd1ec)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
perf_session__fprintf() prints only the host.
This has been changed to print details of host and all guests, by
traversing through the RB-Tree.
These are visible when using high verbosity (-vvvv) in KVM environments,
during perf report dumps.
Testing:
- Test 1: Record the local machine and guest VM using 'perf kvm record' and
generate the report using 'perf kvm report -vvvv -D'. The dump should show
the threads and other details related to local and guest machine.
- 1 Ubuntu VM running on Fedora host
- VM is running a noisy program =>
$ dd if=/dev/urandom of=/dev/null
- On host run =>
$ sudo ./perf kvm --guestvmlinux=/tmp/shared/guest_vmlinux \
--guestkallsyms=/tmp/shared/guest_kallsyms \
--guestmodules=/tmp/shared/guest_modules \
record -a -g -o perf.data.guest
and exit after a few seconds.
[ perf record: Woken up 9 times to write data ]
[ perf record: Captured and wrote 3.150 MB perf.data.guest \
(29311 samples) ]
- Generate dump =>
$ sudo ./perf kvm --guestkallsyms /tmp/shared/guest_kallsyms \
report -vvvv -D -i perf.data.guest > output.txt
- Check for threads associated with guest machine.
$ grep "Thread 0" output.txt
Thread 0 swapper
Thread 0 [guest/0]
PASS
- Test 2: Record the local machine and guest VM using 'perf kvm record' and
generate the report using 'perf kvm report'. The functions running on
guest VM should be seen in the report.
- Same setup as Test 1 but the test looks at the performance profile,
to check if the function names are visible.
- Peek into profile using =>
$ sudo ./perf kvm --guestkallsyms /tmp/shared/guest_kallsyms \
report -i perf.data.guest
- Samples: 29K of event 'cycles', Event count (approx.): 28711693142
Children Self Command Shared Object Symbol
35.69% 35.69% :5820 [guest.kernel.kallsyms] [g] chacha_permute
11.56% 11.56% :5820 [guest.kernel.kallsyms] [g] entry_SYSRETQ_unsXXX
11.12% 11.12% :5820 [guest.kernel.kallsyms] [g] syscall_return_viXXX
7.36% 7.36% :5820 [guest.kernel.kallsyms] [g] entry_SYSCALL_64_XXX
6.07% 6.07% :5820 [guest.kernel.kallsyms] [g] chacha_block_generic
5.40% 5.40% :5820 [guest.kernel.kallsyms] [g] _copy_to_iter
....
PASS
- Test 3: Record the local and 2 guest VMs using 'perf kvm record' and
generate the report using 'perf kvm report -vvvv -D'. The dump should show
the threads and other details related to local and guest machines.
- 1 Ubuntu and 1 Alpine VMs running on Fedora host.
- Find PIDs of qemu instances and use them during record and report
$ pgrep qemu
5816
25098
- Record the activity =>
$ sudo ./perf kvm record -p 5816,25098 -a -g -o perf.data.guests
Warning:
PID/TID switch overriding SYSTEM
[ perf record: Woken up 325927 times to write data ]
[ perf record: Captured and wrote 3.692 MB perf.data.guests \
(57389 samples) ]
- Generate dump =>
$ sudo ./perf kvm report -vvvv -D -i perf.data.guests > output.txt
- Check if the threads related to the local machine and guest VMs
are present =>
$ grep "Thread 0" output.txt
Thread 0 swapper
Thread 0 [guest/0]
NOTE: Threads from Ubuntu and Alpine VMs are bundled together and
appear as one guest machine.
Looking into output.txt =>
Threads: 6
Thread 0 [guest/0]
Thread 5816 :5816
Thread 25098 :25098
Thread 5819 :5819
Thread 5820 :5820
Thread 25103 :25103
To conclude, information is collected for both VMs and not listed
as two different guest machines.
PASS
- Test 4: Check if any guest-related information is printed in
perf annotate. This test is included because the command calls
perf_session__fprintf() in its code path when using -vvvv option.
This could be explained by inability / lack of options for 'perf annotate'
to look into guest VM from host machine, due to no option to specify the
guest's kallsyms or modules. A similar explanation for 'perf mem' could
be used, as perf_session__fprintf() is also present in its code path.
- Run annotate =>
$ sudo ./perf annotate -i perf.data.guest -vvvv > output.txt
- Check for threads from local machine or guest VM =>
$ grep "Thread 0" output.txt
Thread 0 swapper
Threads from local machine are found while threads from guest VM
are not found. It is possibly because of a lack of a guest kallsyms
option for DSO matching in perf annotate.
PASS
- Test 5: Run kvm test available on perf path
- $ sudo ./perf test kvm
89: perf kvm tests : Ok
PASS
Signed-off-by: Hrishikesh Suresh <hrishikesh123s@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
[ Declare 'nd' in the 'for' line and and 'pos' inside the loop body, to make it more compact ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wire up the e_flags now it can be read for a thread. The e_flags
encode the CSKY ABI level and this can impact which perf registers
need setting up for unwinding.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergei Trofimovich <slyich@gmail.com>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Tianyou Li <tianyou.li@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
CSKY needs the e_flags to determine the ABI level and know whether
additional registers are encoded or not. Wire this up now that the
e_flags for a thread can be determined.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Aditya Bodkhe <aditya.b1@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Chun-Tse Shao <ctshao@google.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergei Trofimovich <slyich@gmail.com>
Cc: Shimin Guo <shimin.guo@skydio.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Cc: Tianyou Li <tianyou.li@intel.com>
[ Conditionally define EF_CSKY_ABIMASK and EF_CSKY_ABIV2 for older distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With CONFIG_CC_OPTIMIZE_FOR_SIZE=y, GCC may decide not to inline
__cvdso_clock_getres_common(). This introduces spurious internal
function calls in the vDSO fastpath.
Furthermore, with automatic stack variable initialization
(CONFIG_INIT_STACK_ALL_ZERO or CONFIG_INIT_STACK_ALL_PATTERN) GCC can emit
a call to memset() which is not valid in the vDSO.
Mark __cvdso_clock_getres_common() as __always_inline to avoid both issues.
Paradoxically the inlining even reduces the size of the code:
$ ./scripts/bloat-o-meter arch/powerpc/kernel/vdso/vgettimeofday-32.o.before arch/powerpc/kernel/vdso/vgettimeofday-32.o.after
add/remove: 0/1 grow/shrink: 1/1 up/down: 52/-148 (-96)
Function old new delta
__c_kernel_clock_getres_time64 92 144 +52
__c_kernel_clock_getres 136 132 -4
__cvdso_clock_getres_common 144 - -144
Total: Before=2788, After=2692, chg -3.44%
With CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y the functions are always inlined
and therefore the behaviour stays the same.
See also the equivalent change for clock_gettime() in commit b91c8c42ff
("lib/vdso: Force inlining of __cvdso_clock_gettime_common()").
Fixes: 21bbfd7404 ("x86/vdso: Provide clock_getres_time64() for x86-32")
Fixes: 1149dcdfc9 ("ARM: VDSO: Provide clock_getres_time64()")
Fixes: f10c2e72b5 ("arm64: vdso32: Provide clock_getres_time64()")
Fixes: bec06cd6a1 ("MIPS: vdso: Provide getres_time64() for 32-bit ABIs")
Fixes: 759a1f9737 ("powerpc/vdso: Provide clock_getres_time64()")
Reported-by: Sverdlin, Alexander <alexander.sverdlin@siemens.com>
Suggested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://lore.kernel.org/lkml/230c749f-ebd6-4829-93ee-601d88000a45@kernel.org/
Link: https://patch.msgid.link/20260123-vdso-clock_getres-inline-v1-1-4d6203b90cd3@linutronix.de
Closes: https://lore.kernel.org/lkml/f45316f65a46da638b3c6aa69effd8980e6677b9.camel@siemens.com/
On PTL, the recommendation is to disable DCC(Duty Cycle Control) as
it may cause some regressions due to added latencies. Upcoming GuC
releases will disable DCC on PTL as well, but we need to force it in
KMD so that this behavior is propagated to older kernels.
v2: Update commit message (Rodrigo)
v3: Rebase
v4: Fix typo: s/propagted/propagated
Fixes: 5cdb71d3b0 ("drm/xe/ptl: Add GuC FW definition for PTL")
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patch.msgid.link/20260124005917.398522-1-vinay.belgaumkar@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
clk_prepare_enable() and clk_disable_unprepare() already checked NULL
clock parameter.
Remove unneeded NULL check for wm8731->mclk here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260126073528.1826406-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
