Current code makes it possible to create serdev for only one PCI device.
But for scaling this driver, it is necessary to allow creating serdev for
multiple PCI devices.
Hence, add provision for it by creating 'struct pwrseq_pci_dev' for each
PCI device that requires serdev and add them to
'pwrseq_pcie_m2_ctx::pci_devices' list.
Tested-by: Wei Deng <wei.deng@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260519-pwrseq-m2-bt-v3-2-b39dc2ae3966@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
All functions in this driver follow 'pwrseq_pcie_m2' prefix except a few.
Fix them to avoid inconsistency.
Tested-by: Wei Deng <wei.deng@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20260519-pwrseq-m2-bt-v3-1-b39dc2ae3966@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
A single bugfix for the Rust I2C abstractions, targeting 7.1.
`I2cAdapter::get` calls `i2c_get_adapter()` which returns a pointer with
an already-incremented refcount. The code then converts the raw pointer to
an `ARef` via `.into()`, which calls `inc_ref()` again through the
`From<&T> for ARef<T>` impl — resulting in a leaked device and module
reference on every call.
The fix uses `ARef::from_raw()` instead, which takes ownership of the
existing refcount without incrementing it.
Signed-off-by: Igor Korotin <igor.korotin@linux.dev>
-----BEGIN PGP SIGNATURE-----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=LhTi
-----END PGP SIGNATURE-----
Merge tag 'rust-i2c-7.1-rc7' of https://github.com/ikrtn/linux into i2c/for-current
rust: i2c: fix I2cAdapter refcount double increment
Now that lazy mmu state tracking no longer relies on the Xen specific
one, cpu lazy mode is the only user of the Xen generic lazy tracking.
Replace the Xen generic lazy tracking with a cpu lazy specific one.
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260526150514.129330-6-jgross@suse.com>
There are only very few use cases of XEN_LAZY_MMU left. Get rid of
them in order to avoid having to call enter_lazy(XEN_LAZY_MMU) and
leave_lazy(XEN_LAZY_MMU).
The query in xen_batched_set_pte() can be replaced by using
is_lazy_mmu_mode_active() instead.
As xen_flush_lazy_mmu() will be called only with lazy MMU mode being
active, the test for the lazy mode can just be dropped.
In xen_start_context_switch() and xen_end_context_switch() use
__task_lazy_mmu_mode_pause() and __task_lazy_mmu_mode_resume(),
allowing to drop xen_enter_lazy_mmu() and xen_leave_lazy_mmu()
completely.
Call arch_flush_lazy_mmu_mode() from arch_leave_lazy_mmu_mode(), as
this is the only required action now.
Drop the lazy mmu enter and leave paravirt hooks, leaving the flush
hook as the only needed one.
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260526150514.129330-5-jgross@suse.com>
In order to allow pausing and resuming MMU lazy mode for other tasks
than current, refactor lazy_mmu_mode_pause() and
lazy_mmu_mode_resume().
This will be needed when dropping the Xen PV private lazy MMU
bookkeeping.
Acked-by: "David Hildenbrand (Arm)" <david@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260526150514.129330-4-jgross@suse.com>
Today xen_mc_issue() is deciding whether to call xen_mc_flush() or not
based on the lazy mode input parameter passed.
Modify this interface to pass a boolean indicating whether the flush
should be done.
For querying lazy mmu mode use the is_lazy_mmu_mode_active() helper.
This is done in preparation for dropping the xen_lazy_mode percpu
variable.
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260526150514.129330-3-jgross@suse.com>
Drop the lazy mode (cpu or mmu) from the xen_mc_batch and xen_mc_issue
trace entries.
This is done in preparation of removing the xen_lazy_mode percpu
variable.
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260526150514.129330-2-jgross@suse.com>
The only Xen file in debugfs is for dumping the p2m table when running
as a Xen PV guest. This might have been useful when the PV code was
young, but there haven't been any p2m related bugs requiring the p2m
dump since ages.
Remove the code and the related config option.
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260522152114.77319-4-jgross@suse.com>
Since dropping Xen-PV support for 32-bit, include/trace/events/xen.h
contains several stale trace point definitions. Remove them.
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260522152114.77319-3-jgross@suse.com>
A lot of arch/x86/xen/xen-ops.h is meant to be for PV only. Guard all
of it with CONFIG_XEN_PV in order to avoid someone misusing it in
non-PV builds. Additionally any 64-bit tests for now guarded items can
be dropped.
Move the enum pt_level definition to mmu_pv.c, as it is used only there.
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260522152114.77319-2-jgross@suse.com>
Replace sprintf() calls with sysfs_emit() to follow current kernel
coding standards.
sysfs_emit() is the preferred method for formatting sysfs output as it
provides better bounds checking and is more secure.
Signed-off-by: Yash Suthar <yashsuthar983@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260517133817.29691-1-yashsuthar983@gmail.com>
The 'g_physinfo' and 'ncpus' variables are initialized only during the
init phase in the 'bind_virq_for_mce' function and never changed. So,
mark them as __ro_after_init.
The 'xen_mce_chrdev_device' variable is initialized only in the
declaration and never changed. So, this variable could be 'const', but
using the 'misc_register' and 'misc_deregister' functions discards the
'const' qualifier. Therefore, as an alternative, mark it as
__ro_after_init.
Signed-off-by: Len Bao <len.bao@gmx.us>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260523132802.25391-1-len.bao@gmx.us>
The 'xsd_errors' array is initialized in the declaration and never
changed. So, constify it to reduce the attack surface.
At the same time, use the preferred '__maybe_unused' form over the
'__attribute__((unused))' form.
Signed-off-by: Len Bao <len.bao@gmx.us>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260523140809.30915-1-len.bao@gmx.us>
ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a
received TIM element. The TIM is handed in as the element payload:
ieee802_11_parse_elems_full() stores elems->tim = elem->data and
elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes
are [tim, tim + tim_len).
When walking the encoded blocks the function passes the walker an end
sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of
the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <= end)
and dereferences ptr (and the per-mode ieee80211_s1g_len_*() helpers read
*ptr), so it can read up to two bytes beyond the TIM element -- an
out-of-bounds read of adjacent skb/heap data when the TIM is the last
element in the frame. The +2 appears to account for the element id/len
header, but tim already points past that header at the element payload, so
the addend is wrong.
Pass the correct element end, (const u8 *)tim + tim_len.
Fixes: e0c47c6229 ("wifi: mac80211: support parsing S1G TIM PVB")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260606074341.49135-1-hexlabsecurity@proton.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of using a list initializer---that is hard to read unless you know
the structure of struct pci_device_id by heart---use the PCI_VDEVICE
macro to assign the needed values and drop all explicit but unneeded
zeros.
This doesn't introduce any changes to the compiled result of the array.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20260505102909.2380470-2-u.kleine-koenig@baylibre.com>
mshv_intercept_isr() extracts vp_index from the hypervisor message
payload and uses it directly to index into pt_vp_array without
validation. handle_bitset_message() and handle_pair_message() already
validate vp_index against MSHV_MAX_VPS before array access.
Add the same MSHV_MAX_VPS bounds check for consistency with the other
message handlers.
Fixes: 621191d709 ("Drivers: hv: Introduce mshv_root module to expose /dev/mshv to VMMs")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Move the specification for a line break from a seq_puts() call
to a seq_printf() call.
The source code was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Sahil Chandna <sahilchandna@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Make cosmetic changes:
o Rename struct pci_dev *dev to *pdev since there are cases of
struct device *dev in the file and all over the kernel
o Rename hv_build_pci_dev_id to hv_build_devid_type_pci in anticipation
of building different types of device ids
o Fix checkpatch.pl issues with return and extraneous printk
o Replace spaces with tabs
o Rename struct hv_devid *xxx to struct hv_devid *hv_devid given code
paths involve many types of device ids
o Fix indentation in a large if block by using goto.
There are no functional changes.
Reviewed-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Reviewed-by: Anirudh Rayabharam (Microsoft) <anirudh@anirudhrb.com>
Signed-off-by: Mukesh R <mrathor@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Create hyperv subdirectory under drivers/iommu in anticipation of more
Hyper-V related files from upcoming PCI passthrough and PV-IOMMU patches.
Also, the current file hyperv-iommu.c actually implements irq remapping on
x86, so rename to more appropriate hv-irq-remap-x86.c and move it under
the new hyperv subdirectory. Since this file implements irq_remap_ops
exposed by drivers/iommu/irq_remapping.h, it cannot be relocated to the
irq directory. This is in sync with other backend directories like amd
and intel there.
Lastly, this file should not be tied to CONFIG_HYPERV_IOMMU, but to
CONFIG_HYPERV and CONFIG_IRQ_REMAP.
Signed-off-by: Mukesh R <mrathor@linux.microsoft.com>
Reviewed-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
On K3 SoCs, ti-cpufreq relies on k3-socinfo to register the SoC
device before soc_device_match() can return valid revision
information. If ti-cpufreq probes before k3-socinfo,
soc_device_match() returns NULL, leading to incorrect CPU frequency
scaling behavior.
Add a needs_k3_socinfo flag to ti_cpufreq_soc_data (similar to
the existing multi_regulator pattern) to defer probe when k3-socinfo
hasn't registered the SoC device yet.
Signed-off-by: Akashdeep Kaur <a-kaur@ti.com>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Qualcomm Shikra cpufreq hardware is functionally identical to EPSS,
but supports only up to 12 frequency lookup table (LUT) entries. When all
12 entries are populated, the existing repetitive LUT entry check may read
beyond valid entries and expose incorrect frequencies. Hence, introduce
shikra_epss_soc_data that reuses EPSS configuration with appropriate LUT
entries limit.
Signed-off-by: Taniya Das <taniya.das@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The Qualcomm Shikra cpufreq hardware is functionally identical to EPSS,
but supports only up to 12 frequency lookup table (LUT) entries. Introduce
Shikra specific bindings to represent this constrained EPSS variant.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Imran Shaik <imran.shaik@oss.qualcomm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Convert all ColdFire specific SoC/board setup code to only use the
newly created internal register access methods. This is replacing the
mixed and inconsistent use of readx/writex and __raw_readx/__raw_writex
for internal SoC registers.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Convert all ColdFire specific system setup code to only use the
newly created internal register access methods. This is replacing the
mixed and inconsistent use of readx/writex and __raw_readx/__raw_writex
for internal SoC registers.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
With the basic ColdFire IO register functions now consistently named
with a "mcf_read"/"mcf_write" prefix it makes sense to name the timers
internal access defines the same way. Convert the local __raw_readtrr
and __raw_writetrr defines to use the consistent prefixes too. Thus
the change is:
__raw_readtrr --> mcf_readtrr
__raw_writetrr --> mcf_writetrr
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Convert all ColdFire specific timer setup code to only use the
newly created internal register access methods. This is replacing the
mixed and inconsistent use of readx/writex and __raw_readx/__raw_writex
for internal SoC registers.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Convert all ColdFire specific interrupt setup code to only use the
newly created internal register access methods. This is replacing the
mixed and inconsistent use of readx/writex and __raw_readx/__raw_writex
for internal SoC registers.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Convert all m68k/ColdFire specific header file code to only use the
newly created internal register access methods. This is replacing the
mixed and inconsistent use of readx/writex and __raw_readx/__raw_writex
for internal SoC registers.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The internal peripheral registers contained in all varieties of ColdFire
SoCs require simple big endian access ranging in sizes from 8, 16 and 32
bit. Currently there is a mixture of IO access methods used across the
various CPU support code, some using readx/writex and some using the
simpler __raw_readx/__raw_writew.
The readx/writex use cases are particularly kludgy in that they contain
code to differentiate internal register access and other general attached
peripheral register access - say on a PCI bus. In effect this means that
the readx/writex family for ColdFire is non-standard. This ultimately
ends up causing problems with definitions of other IO access support
functions like ioreadx/ioreadxbe/iowritex/iowritexbe which in the
generic case are defined in terms of readx/writex.
Create a set of internal only register access methods to ultimately
replace all internal register access code. The new access functions
mirror the existing readx/writex family but using the preferred 8/16/32
suffixes.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Add a default configuration for a basic M5307 based NETtel board.
This is primarily to improve defconfig build coverage. This platforms
uses the SMSC ethernet drivers for network ports, and has a few other
minor quirks that make it different from other ColdFire platforms.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Add a default configuration for a basic M54418 based EVB board.
The SoC has been supported for a long time but there is no default
configuration. Create one to improve build and test coverage.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Add a default configuration file for the Freescale M5329EVB board.
Although the SoC type has been supported for a long time there has been
no defconfig for the base platform. Create one to give better build
and test coverage.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The common coldfire code uses the old GPIO number based interfaces for
at least the QSPI chipselect lines. Select the required Kconfig symbol
to keep it building when that becomes optional.
Apparently there are no devices attached to a QSPI controller in any of
the coldfire boards, so this is not actually used in upstream kernels.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Sysam name has changed to Kernelspace, updating each reference.
Signed-off-by: Angelo Dureghello <angelo@kernel-space.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The kunit_parser module accepts a 'printer' object which is used as a
destination for all output. This is typically set to stdout, so that the
parsed results are visible, but can be set to a special 'null_printer' to
implement options where not all results are always printed.
However, there are a few places where use of stdout is hardcoded, notably
in handling crashed tests and in outputting the colour escape sequences.
Properly use the specified printer for all output. This is okay for the
colour handling (as this is already gated behind isatty() anyway), and also
for the crash handling, as cases where printer != stdout are separately
printed afterwards.
Link: https://lore.kernel.org/r/20260606020317.264178-1-david@davidgow.net
Fixes: 062a9dd9ba ("kunit: tool: Only print the summary")
Signed-off-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This is used by things like Jenkins and other CI systems, which can
pretty-print the test output and potentially provide test-level comparisons
between runs.
The implementation here is pretty basic: it only provides the raw results,
split into tests and test suites, and doesn't provide any overall metadata.
However, CI systems like Jenkins can ingest it and it is already useful.
Link: https://lore.kernel.org/r/20260606013827.240790-2-david@davidgow.net
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When a KUnit test (or other KTAP test) is skipped, a "skip reason" can be
provided. kunit.py has never done anything with this, ignoring anything
included in the KTAP output after the 'SKIP' directive.
Since we have it, and it's used, print it in a nice friendly yellow in
parentheses after a skipped test's name.
(And, by parsing it, it can be included in the JUnit results as well.)
Link: https://lore.kernel.org/r/20260606013827.240790-1-david@davidgow.net
Signed-off-by: David Gow <david@davidgow.net>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Mykyta Yatsenko says:
====================
bpf: Fix LRU NMI/tracepoint re-entry deadlock
This series fixes AA-deadlocks where NMI and tracepoint BPF programs
re-enter the per-CPU or global LRU lock already held on the same CPU
(syzbot c69a0a2c816716f1e0d5, 18b26edb69b2e19f3b33).
Patch 1 converts every LRU lock site to rqspinlock_t
and adds explicit recovery for some failures so no node leaks.
Patch 2 refreshes Documentation/bpf/map_lru_hash_update.dot to show
the new rqspinlock failure exits and recovery routes.
Patch 3 introduces a stress test.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
---
Changes in v3:
- Removed RFC tag
- Link to v2: https://patch.msgid.link/20260603-lru_map_spin-v2-0-7060cfb6cdac@meta.com
Changes in v2:
- Patch 1: __bpf_lru_node_move_in() now clears pending_free only when
moving to the FREE list.
- Patch 3: address sashiko's feedback.
- Link to v1: https://patch.msgid.link/20260528-lru_map_spin-v1-0-4f52223170cf@meta.com
====================
Link: https://patch.msgid.link/20260607-lru_map_spin-v3-0-bcd9332e911b@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduces stress test for bpf_lru_list that exercises
lock-failures and orphan-recovery, added by the LRU rqspinlock
conversion.
Runs three subtests: common LRU, per-CPU LRU lists (BPF_F_NO_COMMON_LRU),
and per-CPU LRU map. Each pins one userspace hammer per CPU and attaches
the perf_event NMI BPF prog (update+delete mix) on every online CPU.
Pre-fix, lockdep fires the "INITIAL USE -> IN-NMI" splat during stress.
After stress test, drain_then_verify_capacity() drains every key
and refills the lru map.
A stranded node on any CPU's pool would have forced eviction of
a just-inserted key on that CPU, surfacing here as a missing lookup.
Marked serial_ because per-CPU pinning and high-rate HW perf events
would perturb parallel tests.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260607-lru_map_spin-v3-3-bcd9332e911b@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reflect the rqspinlock conversion and orphan-recovery paths added in
the previous commit:
- All LRU locks are rqspinlock_t; any acquire can fail (AA or
timeout). A shared "rqspinlock acquire failed" terminal collapses
to the existing -ENOMEM exit. Dashed arrows from each acquire site
mark the failure paths.
- The per-CPU local freelist is now lockless (free_llist).
- Post-steal: re-acquiring loc_l->lock to insert the stolen node
into the local pending list can fail; on failure the node is
published to free_llist instead of being orphaned, and the call
returns -ENOMEM.
- Steal-loop victim lock failure is silent: skip the victim and try
the next CPU.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260607-lru_map_spin-v3-2-bcd9332e911b@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that the Rust KUnit tests are protected with Kconfig, update the
documentation to mention it.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Reviewed-by: David Gow <david@davidgow.net>
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260417031531.315281-4-ynorov@nvidia.com
[ Fixed the paragraph by moving the new sentence above. Added gate
in the other example as well. Applied proper formatting. Reworded
slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
There are 6 individual Rust KUnit test suites (plus the doctests one). All
the tests are compiled unconditionally now, which adds ~200 kB to the
kernel image for me on x86_64. As Rust matures, this bloating will
inevitably grow.
Add Kconfig.test which includes a RUST_KUNIT_TESTS menu, and all
individual tests under it.
As usual, new tests are all enabled if KUNIT_ALL_TESTS=y.
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Reviewed-by: David Gow <david@davidgow.net>
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260417031531.315281-3-ynorov@nvidia.com
[ Fixed capitalization. Used singular for "API" for consistency.
Reworded to clarify these are suites and that there exists
the doctests one (which is the biggest at the moment by
far). - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The following patch makes usage of macros::kunit_tests crate conditional
on the corresponding configs. When the configs are disabled, compiler
warns on unused crate. So, embed it in unit test declaration.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Reviewed-by: David Gow <david@davidgow.net>
Acked-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260417031531.315281-2-ynorov@nvidia.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The wakeup condition if a min timeout is present and has expired is that
at least _one_ CQE was posted. Thus set the cq_tail target to
->cq_min_tail + 1. Without this commit a spurious wakeup can result in a
premature wakeup because io_should_wake() will return true even if _no_
CQE was posted at all.
Cc: Tip ten Brink <tip@tenbrinkmeijs.com>
Fixes: e15cb2200b ("io_uring: fix min_wait wakeups for SQPOLL")
Cc: stable@vger.kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Link: https://patch.msgid.link/20260606201120.1441447-1-lk@c--e.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
