Both the PHYs of the EQOS interface and the FEC interface are supported
to be reset by I2C GPIO expander. So add the support to reset PHYs.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The wdog3 node enables fsl,ext-reset-output to assert an external
reset signal upon watchdog timeout, but lacks pinctrl configuration
for the physical pad.
Without proper pinctrl settings, which could cause the watchdog timeout
to fail to reset the board hardware.
Add pinctrl configuration to ensure the pin is properly muxed and
configured for external watchdog reset functionality.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The wdog3 node enables fsl,ext-reset-output to assert an external
reset signal upon watchdog timeout, but lacks pinctrl configuration
for the physical pad.
Without proper pinctrl settings, which could cause the watchdog timeout
to fail to reset the board hardware.
Add pinctrl configuration to ensure the pin is properly muxed and
configured for external watchdog reset functionality.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The clock-frequency property is not implemented. Remove it to clean up the
device tree.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add the bootph-all property to ULP watchdog nodes across multiple i.MX
SoC device trees, ensuring the watchdog is available during all boot
phases.
The affected watchdog nodes are:
- imx8ulp: wdog3
- imx91/93: wdog3, wdog4, wdog5
- imx94: wdog3
- imx95: wdog3
- imx952: wdog3
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The DDR Performance Monitor node was added with incorrect interrupt
number 91, which actually belongs to the wdog4 watchdog. Fix it to the
correct interrupt number 374.
Fixes: e918e5f847 ("arm64: dts: imx94: add DDR Perf Monitor node")
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Reviewed-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add ADC0 and ADC1 for S32G2 and S32G3 SoCs.
Signed-off-by: Khristine Andreea Barbulescu <khristineandreea.barbulescu@oss.nxp.com>
Reviewed-by: Enric Balletbo i Serra <eballetb@redhat.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The vpcie-supply property should reference the regulator that controls
the actual M.2 power supply, not the W_DISABLE1# signal.
On imx943-evk:
- reg_m2_wlan controls M.2 W_DISABLE1# signal
- reg_m2_pwr controls the actual M.2 power supply
Fix the vpcie-supply to use reg_m2_pwr for proper power control in
PCIe endpoint mode.
Fixes: 1962c596d51c ("arm64: dts: imx943-evk: Add pcie[0,1] and pcie-ep[0,1] support")
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add PIT0 and PIT1 for S32G2 and S32G3 SoCs
Signed-off-by: Khristine Andreea Barbulescu <khristineandreea.barbulescu@oss.nxp.com>
Reviewed-by: Enric Balletbo i Serra <eballetb@redhat.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
There is an onboard level shifter for the SPI signals that causes
additional propagation delay and renders the SPI transmission
unreliable at 20 MHz. Reduce the clock frequency to a safe value.
Fixes: 946ab10e3f ("arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier board")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Since describing the PCIe PERST# property under Host Bridge node is now
deprecated, it is recommended to add it to the Root Port node, so
creating the Root Port node and add the reset-gpios property in Root
Port.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add DT overlays to support DH i.MX8M Plus DHCOM SoM variants and carrier
board expansion modules. The following DT overlays are implemented:
- SoM:
- DH 660-x00 SoM with 1xRMII PHY
- DH 660-x00 SoM with 2xRMII PHY
- PDK2:
- DH 505-200 Display board in edge connector X12 via direct LVDS
- DH 531-100 SPI/I2C board in header X21
- DH 531-200 SPI/I2C board in header X22
- DH 560-200 Display board in edge connector X12
- PDK3:
- DH 505-200 Display board in edge connector X36 via direct LVDS
- DH 531-100 SPI/I2C board in header X40
- DH 531-200 SPI/I2C board in header X41
- DH 560-300 Display board in edge connector X36
- EA muRata 2AE M.2 A/E-Key card in connector X20
- NXP SPF-29853-C1 MINISASTOCSI with OV5640 sensor in connector X31
- NXP SPF-29853-C1 MINISASTOCSI with OV5640 sensor in connector X29
- PicoITX:
- DH 626-100 Display board in edge connector X2
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Initialize iwmr->access during initial user mem registration so
that it contains a valid value during a subsequent rereg_mr.
Otherwise, a rereg_mr that doesn't set IB_MR_REREG_ACCESS (for
example, one that only changes the PD) ends up clearing the
access flags in HW since iwmr->access is zero-initialized, which
is not intended.
Fixes: 5ac388db27 ("RDMA/irdma: Add support to re-register a memory region")
Link: https://patch.msgid.link/r/20260604154104.4035581-1-jmoroni@google.com
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Sashiko pointed out an unrelated bug during a previous patch:
https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com
This change fixes the bug by eliminating the cqmr->split field which
was not being set properly and instead just checks the CQ resize
feature flag directly.
The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE
is set, but it was not being set until CQ creation time, which is _after_
CQ memory registration (the only other place where it is referenced).
As a result, it would always be false during MR registration and would
therefore cause irdma_handle_q_mem to populate cqmr->shadow even for GEN_2
HW and beyond:
cqmr->shadow = (dma_addr_t)arr[req->cq_pages];
The issue is that for GEN_2 and beyond, req->cq_pages may be exactly equal
to iwmr->page_cnt and therefore equal to the size of arr, which would cause
an OOB read by one.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://patch.msgid.link/r/20260602214423.1315105-2-jmoroni@google.com
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The driver has the following invariants:
1. legacy_mode is only allowed on GEN_1 hardware (enforced
in irdma_alloc_ucontext).
2. GEN_1 hardware does not set IRDMA_FEATURE_CQ_RESIZE or
IRDMA_FEATURE_RTS_AE. These feature flags are only set
for GEN_2 and GEN_3 hardware.
Therefore, legacy_mode is always false if IRDMA_FEATURE_CQ_RESIZE
or IRDMA_FEATURE_RTS_AE is set, so remove the redundant checks.
Link: https://patch.msgid.link/r/20260602214423.1315105-1-jmoroni@google.com
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In drivers/infiniband/sw/siw/siw_qp_rx.c, siw_proc_rresp() places each
inbound Read Response DDP segment at sge->laddr + wqe->processed and then
accumulates wqe->processed, but it never checks the running total against
the sink buffer length on continuation segments. siw_check_sge() resolves
and validates the sink memory only on the first fragment (the if (!*mem)
branch), and siw_rresp_check_ntoh() compares the cumulative length against
wqe->bytes only on the final segment (the !frx->more_ddp_segs guard).
A connected siw peer that answers an outstanding RREAD with Read Response
segments that keep the DDP Last flag clear, carrying more total payload
than the RREAD requested, drives wqe->processed past the validated sink
buffer; the next siw_rx_data() call writes out of bounds at
sge->laddr + wqe->processed. siw runs iWARP over ordinary routable TCP,
so the peer is the remote end of an established RDMA connection and needs
no local privilege.
Bound every segment before placement, exactly as siw_proc_send() and
siw_proc_write() already do for their tagged and untagged paths, and
terminate the connection with a base-or-bounds DDP error when the
Read Response would overrun the sink buffer.
This is the second receive-path length fix for this file. A separate
change rejects an MPA FPDU length that underflows the per-fragment
remainder in the header decode; that guard does not cover this case,
because here each individual segment length is self-consistent and only
the accumulated placement offset overruns the buffer.
Fixes: 8b6a361b8c ("rdma/siw: receive path")
Link: https://patch.msgid.link/r/20260602194700.2273758-1-michael.bommarito@gmail.com
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Correctly drop the ITS translation cache reference when it actually
gets invalidated
- Take the SRCU lock for SW page table walks
- Restore POR_EL0 access to host EL0, avoiding POR_EL0 becoming
inaccessible from EL0 after running a guest
- Reassign nested_mmus array behind mmu_lock, ensuring that vcpu init
and MMU notifiers are mutually exclusive
- Correctly handle FEAT_XNX at stage-2
-----BEGIN PGP SIGNATURE-----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=8bS2
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-7.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.1, take #5
- Correctly drop the ITS translation cache reference when it actually
gets invalidated
- Take the SRCU lock for SW page table walks
- Restore POR_EL0 access to host EL0, avoiding POR_EL0 becoming
inaccessible from EL0 after running a guest
- Reassign nested_mmus array behind mmu_lock, ensuring that vcpu init
and MMU notifiers are mutually exclusive
- Correctly handle FEAT_XNX at stage-2
vfio_mig_get_next_state() walks vfio_from_fsm_table[] one step at a time,
looping to skip optional states the device does not support until
*next_fsm is supported. A blocked transition is encoded as
VFIO_DEVICE_STATE_ERROR, which the trailing return reports as -EINVAL.
The skip loop does not account for the ERROR sentinel.
state_flags_table[ERROR] is ~0U and vfio_from_fsm_table[ERROR][*] is
ERROR, so once *next_fsm becomes ERROR the loop condition stays true and
*next_fsm never changes. The blocked arcs STOP_COPY -> PRE_COPY and
STOP_COPY -> PRE_COPY_P2P map to ERROR yet pass the support check on a
precopy-capable device, causing the loop to spin forever while holding
the driver state mutex. This can result in a soft lockup, and a panic
with softlockup_panic set.
Terminate the skip loop on the ERROR sentinel so a blocked transition
falls through to the existing return and reports -EINVAL.
Fixes: 4db52602a6 ("vfio: Extend the device migration protocol with PRE_COPY")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/SYBPR01MB7881290BBDE79B61AE6A017FAF122@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Add a CXL DVSEC-based readiness check for Blackwell-Next GPUs alongside
the existing legacy BAR0 polling path. The CXL Device DVSEC offset is
discovered at probe time. Probe, fault and read/write paths then branch
on that to use either the legacy BAR0 polling or the CXL DVSEC polling.
The CXL path polls Memory_Active, requiring MEM_INFO_VALID within 1s and
MEM_ACTIVE within Memory_Active_Timeout (up to 256s) as per CXL spec r4.0
sec 8.1.3.8.2. Given the long worst-case wait, the CXL poll runs outside
memory_lock with only a quick readiness check is done under the lock.
The poll loops sleep with schedule_timeout_killable() and return -EINTR
on a fatal signal. This avoids hung-task panics during the long
uninterruptible wait. Extend this to the legacy based wait as well for
improvement.
In the fault handler the wait runs locklessly before memory_lock. If a
reset races in, the in-lock recheck returns -EAGAIN and the wait is
retried rather than returning a spurious VM_FAULT_SIGBUS.
Add PCI_DVSEC_CXL_MEM_ACTIVE_TIMEOUT to pci_regs.h for the timeout field.
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260602063015.3915-1-ankita@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
In mlx5_ib_enable_lb(), dev->lb.enabled was unconditionally set
to true even if mlx5_nic_vport_update_local_lb() failed.
Fix this by only setting dev->lb.enabled on success. On failure,
roll back the reference counters and return the error.
Link: https://patch.msgid.link/r/20260601095818.2227-1-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
__mlx5_ib_add() currently returns -ENOMEM on any stage initialization
failure, losing the actual error code returned by the init function.
This makes it impossible for callers to distinguish between different
failure reasons (e.g. -EINVAL, -EIO, -EOPNOTSUPP) and leads to
misleading error handling.
Fix it by returning the actual error code stored in 'err'.
Link: https://patch.msgid.link/r/20260601095654.2178-1-lirongqing@baidu.com
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Bugfixes:
- Fix a use after free in nfs_write_completion
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR8xgHcVzJNfOYElJo6EXfx2a6V0QUCaiLziAAKCRA6EXfx2a6V
0fX1AP0VI3hJgrOufhJZNFh5/yYTKNtuNIsVzObrbKDirhZjMwEAgQEXgXeB8tN4
IxCq3qi8eK600iLKqn7PwjAvHMrZiwY=
=qHOO
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-7.1-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fix from Trond Myklebust:
- Fix a use after free in nfs_write_completion
* tag 'nfs-for-7.1-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: write_completion: dereference loop-local req, not hdr->req
With commit 2d9223d2d6 ("ALSA: hda: Move controller drivers into
sound/hda/controllers directory") the HD Audio drivers have been moved
from linux/sound/pci/hda to linux/sound/hda.
But the Kconfig dependency for SND_HDA_INTEL stayed on SND_PCI instead of
depending on PCI directly. To make the "HD Audio PCI" configuration entry
visible it is currently needed to enable "PCI sound devices" although
no PCI device in the submenu needs to be selected.
Make SND_HDA_INTEL directly depending on hardware/architecture like the
other entries in this Kconfig.
Fixes: 2d9223d2d6 ("ALSA: hda: Move controller drivers into sound/hda/controllers directory")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260529-hda-kconfig-v1-1-4a2c6a0efd56@hartkopp.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When both PASID and force_iova are disabled, carveout memory should be
used. Reject buffer allocations that cannot use carveout memory in this
configuration and return an error.
Fixes: 3cc5d7a595 ("accel/amdxdna: Add carveout memory support for non-IOMMU systems")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260604195459.2423279-1-lizhi.hou@amd.com
Divide the monolithic SBI FWFT (Firmware Features) register list into
separate sublists, each testing a specific FWFT feature independently
with proper dependency checking.
Previously, all FWFT features were tested together in a single sublist.
This caused issues because:
1. Not all FWFT features are available on all platforms
2. Some features depend on specific ISA extensions (e.g., pointer_masking
requires Smnpm)
3. Tests would fail if any single feature was unavailable
Add the feature-specific SBI FWFT sublists with the following
improvements:
- Add check_fwft_feature() helper to verify FWFT feature availability
at runtime
- Update filter_reg() to handle per-feature FWFT register filtering
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260601-kvm-get_reg_list-v2-v5-5-415d08a2813b@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Refactor the get-reg-list test to use unified sublist macros for ISA
and SBI extensions, eliminating code duplication and improving
maintainability.
Previously, each extension had its own hand-coded sublist definition
(e.g., SUBLIST_ZICBOM, SUBLIST_AIA, etc.) and the config structures
repeated the same pattern. This made the code verbose and error-prone.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260601-kvm-get_reg_list-v2-v5-4-415d08a2813b@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Fix a bug where FWFT features could be incorrectly exposed to guests
after userspace disables their dependent ISA extensions at runtime.
The 'supported' field in kvm_sbi_fwft_config was set once during vCPU
initialization based on the initial hardware/extension availability.
However, when userspace subsequently disables ISA extensions via the KVM
ONE_REG interface, the 'supported' field was not updated. This caused
the following issues:
1. FWFT features would remain visible and accessible to guests even
after their prerequisite ISA extensions were disabled
2. Guests could configure FWFT features that depend on disabled
extensions, leading to undefined behavior
3. The static 'supported' flag and the dynamic supported() callback
could disagree about feature availability
The fix introduces a two-layer checking mechanism:
1. Add an optional init() callback to the kvm_sbi_fwft_feature structure
for features that require hardware probing during initialization. This
separates the one-time hardware detection logic from the runtime
availability check.
2. Add runtime checks in all FWFT-related functions that call
feature->supported(vcpu) if the callback exists. This ensures feature
availability is re-evaluated based on the current ISA extension state.
This approach maintains the cached 'supported' field for initialization-
time decisions while ensuring runtime availability is always determined
by the current vCPU configuration, not initialization-time snapshots.
Fixes: 6b72fd1705 ("RISC-V: KVM: add support for FWFT SBI extension")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260601-kvm-get_reg_list-v2-v5-3-415d08a2813b@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Add an optional init() callback to separate one-time hardware probing
from runtime availability checks. For pointer masking, this allows
probing supported PMM lengths during initialization while checking ISA
extension availability at runtime.
Fix try_to_set_pmm() to restore the previous HENVCFG.PMM value after
probing, preventing side effects from hardware detection. Add preemption
protection to ensure CSR probe sequences complete atomically on the same
CPU.
Fixes: 6f576fc0ae ("RISC-V: KVM: Add support for SBI_FWFT_POINTER_MASKING_PMLEN")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260601-kvm-get_reg_list-v2-v5-2-415d08a2813b@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Mark the vCPU CSRs as dirty after successfully setting an FWFT feature
value. FWFT features may modify CSRs (e.g., pointer masking modifies
henvcfg.PMM), and failing to mark them dirty can lead to the guest
observing stale CSR state after vCPU scheduling or migration.
Fixes: 1323a5cfe5 ("KVM: riscv: Skip CSR restore if VCPU is reloaded on the same core")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20260601-kvm-get_reg_list-v2-v5-1-415d08a2813b@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Codex pointed out that cm_init_av_by_path() can call cm_set_av_port()
which takes a reference on the cm device, but then can immediately return
error if ib_init_ah_attr_from_path() fails.
Since callers like ib_send_cm_req() put the av on the stack this leaks
that cm device reference.
Re-order cm_init_av_by_path() so it doesn't touch the av until it has done
all its failable work, and then update the av in one shot so it is either
left alone or fully init'd.
Sashiko also pointed out that the cm_destroy_av() prior to
cm_init_av_by_path() is harmful as it leaves the AV broken in the error
case and thus the REJ won't send. Since cm_init_av_by_path() is now atomic
it is safe to delete the cm_destroy_av(). On succees the av from
cm_init_av_for_response() is cleaned up by cm_init_av_by_path(), on
failure the 'goto rejected' guarentees the av is destroyed during
ib_destroy_cm_id().
Fixes: 76039ac909 ("IB/cm: Protect cm_dev, cm_ports and mad_agent with kref and lock")
Link: https://patch.msgid.link/r/0-v1-38292501f539+14f-ib_cm_av_leak_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
clang warns about a function missing a printf attribute:
include/rdma/rdma_vt.h:457:47: error: diagnostic behavior may be improved by adding the 'format(printf, 2, 3)' attribute to the declaration of 'rvt_set_ibdev_name' [-Werror,-Wmissing-format-attribute]
447 | static inline void rvt_set_ibdev_name(struct rvt_dev_info *rdi,
| __attribute__((format(printf, 2, 3)))
448 | const char *fmt, const char *name,
449 | const int unit)
The helper was originally added as an abstraction for the hfi1 and
qib drivers needing the same thing, but now qib is gone, and hfi1
is the only remaining user of rdma_vt.
Avoid the warning and allow the compiler to check the format string by
open-coding the helper and directly assigning the device name.
Fixes: 5084c8ff21 ("IB/{rdmavt, hfi1, qib}: Self determine driver name")
Link: https://patch.msgid.link/r/20260602140453.3542427-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Sashiko points out the roundup_pow_of_two() only uses unsigned long but
dma_addr_t can be u64.
Change this algorithm to be simpler, compute the page size, if any page
size is found and it results in a single block then it is contiguous.
Link: https://patch.msgid.link/r/3-v1-88303e9e509f+f7-ib_umem_types_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Several corner cases, especially important on 32 bits:
- umem->iova is u64, the function argument should pass in u64 or
iova will be truncated
- Check that the length is not too large for the iova
- Check that lengths > 4G don't overflow the GENMASK
Link: https://patch.msgid.link/r/2-v1-88303e9e509f+f7-ib_umem_types_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaiKcdwAKCRBcsMJ8RxYu
Y4d+AX9CjmcF5yEZVe+7YCc0ktUUvm0EQwXmGDMCm8UzT1kcWVRDF2eIxu/cYKjo
a1AfN9gBgMA/yJNYWyUluSiF+vTD2y2iuCX08k2p/8qplUEuEINRjooEp6bgJ6bN
BYeFp1mXSw==
=Kpi8
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-7.1-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"A collection of fixes mostly for the RT device, including a small
refactor that has no functional change"
* tag 'xfs-fixes-7.1-rc7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: Remove mention of PageWriteback
xfs: abort mount if xfs_fs_reserve_ag_blocks fails
xfs: factor rtgroup geom write pointer reporting into a helper
xfs: drop the RTG reference later in xfs_ioc_rtgroup_geometry
xfs: fix rtgroup cleanup in CoW fork repair
xfs: fix error returns in CoW fork repair
xfs: fix overlapping extents returned for pNFS LAYOUTGET
xfs: fix use of uninitialized imap in xfs_fs_map_blocks error path
xfs: handle racing deletions in xfs_zone_gc_iter_irec
- Fix a UAF of sbi->sync_decompress when compressed I/Os
race with unmount
- Fix a regression introduced this development cycle that
incorrectly rejects multiple-algorithm images
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEQ0A6bDUS9Y+83NPFUXZn5Zlu5qoFAmoiGEoRHHhpYW5nQGtl
cm5lbC5vcmcACgkQUXZn5Zlu5qrkCQ/9HTsNbR3k+xFvSd7wNtV3s2pKRX2ctEVn
KWiOk5ZNRWUWImL7a0gEwjGtkGPDg4yXWHQnm0hPO6bBqXOXoPuDomsSDC5EzvQ+
ID2dxkc+nJeg9MkiKEY3W78yTkOI8Xrn8ZYi02U30Vk0vzWiiEnJG9pKp6XTheAi
zRA2iqoiE00wTbAZCW3xqyHcw2djBRuaBYPYycHJCw3D+sVcnuVrLUeeFNKXsar1
p2FG+9tzPgMhMFJgTkiD7SA0dmRp4PoJsY1d1P1uuqBJ/PFWmWTbnCmNvUZUQFcR
d2rT0jxlW4oA+lzP/RT0lDmvR3howEy4F+gLlsh8jYO5RmtLyAv5gVzxqugN0Jc4
ZSRX6qgVYhsHe/DzbPIbZFjcWUNs7Q1gS6NwUhjlZ9r4CJ2Yh/n43koPWwJB/xTt
HmkSuaOatu5zDHvohlbX2AAoxALDs+fO9lu9C9cgCAx/dS01zdgUyCWYIH43+OAp
BveL+jmzdzLnMakCs3ImsrgTZXxqrmCe0HgsCVjqGsmDCk8y3CDmMhG1EYn0bOgA
OnbkGj2Q/MmXJbrgsogOgc6oIg+sFf1GzMiNFeUTm7nSHgmoqI2f+aTMz9qNmKZu
9XPvyzfPFF/0NPxF9c0e7bwiMyaZLXaHn1wG2eXbubSQbIxRBmnid8XiA/SaOHUq
kY6gkXUB+4k=
=CHHg
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-7.1-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- Fix a UAF of sbi->sync_decompress when compressed I/Os
race with unmount
- Fix a regression introduced this development cycle that
incorrectly rejects multiple-algorithm images
* tag 'erofs-for-7.1-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix EFSCORRUPTED on multi-algorithm images in z_erofs_map_sanity_check()
erofs: fix use-after-free on sbi->sync_decompress
-----BEGIN PGP SIGNATURE-----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=7kge
-----END PGP SIGNATURE-----
Merge tag 'v7.1-rc7-ksmbd-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- Fix use after free in SMB2_CANCEL
- Fix race in ksmbd_reopen_durable_fd
- Fix oplock and lease break potential NULL-dref
* tag 'v7.1-rc7-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL
ksmbd: fix durable reconnect double-bind race in ksmbd_reopen_durable_fd
ksmbd: fix NULL-deref of opinfo->conn in oplock/lease break notifiers
apply_range_set_cb() maps the pages for a new arena allocation and returned
-EBUSY when the target PTE was already populated. Kernel-fault recovery
leaves the per-arena scratch page in unallocated arena PTEs, so a later
bpf_arena_alloc_pages() over such a page hits that -EBUSY, and every
subsequent allocation of it fails the same way. Allocation must install the
real page over scratch instead.
Overwriting the scratch PTE in place is a valid->valid change, which arm64
forbids without break-before-make. Route through an invalid entry instead:
ptep_try_set() fills only a none slot, so the PTE goes scratch->none->page.
On finding scratch, clear it and flush_tlb_before_set() before retrying. The
new flush_tlb_before_set() is a no-op except on arches like arm64 that need
the break-before-make TLB invalidate. The loop also copes with a concurrent
fault re-scratching the slot.
Arches without ptep_try_set() never install the scratch page, so keep the
must-be-empty check and set_pte_at() for them.
Fixes: dc11a4dba2 ("bpf: Recover arena kernel faults with scratch page")
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260601183728.1800490-1-tj@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
fastrpc_map_lookup returns a raw pointer after releasing fl->lock. The
caller fastrpc_map_create then calls fastrpc_map_get (kref_get_unless_zero)
on this unprotected pointer. A concurrent MEM_UNMAP can free the map
between the lock release and the kref operation, resulting in a
use-after-free on the freed slab object.
Restore the take_ref parameter to fastrpc_map_lookup so the reference
is acquired atomically under fl->lock before the pointer is exposed to
the caller.
Fixes: 10df039834 ("misc: fastrpc: Skip reference for DMA handles")
Cc: stable@vger.kernel.org
Signed-off-by: Zhenghang Xiao <kipreyyy@gmail.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260530204528.116920-5-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A NULL pointer dereference was observed on Hawi at boot when the DSP
sends a glink message before fastrpc_rpmsg_probe() has completed
initialization:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000178
pc : _raw_spin_lock_irqsave+0x34/0x8c
lr : fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc]
...
Call trace:
_raw_spin_lock_irqsave+0x34/0x8c (P)
fastrpc_rpmsg_callback+0x3c/0xcc [fastrpc]
qcom_glink_native_rx+0x538/0x6a4
qcom_glink_smem_intr+0x14/0x24 [qcom_glink_smem]
The faulting address 0x178 corresponds to the lock variable inside
struct fastrpc_channel_ctx, confirming that cctx is NULL when
fastrpc_rpmsg_callback() attempts to take the spinlock.
There are two issues here. First, dev_set_drvdata() is called before
spin_lock_init() and idr_init(), leaving a window where the callback
can retrieve a valid cctx pointer but operate on an uninitialized
spinlock. Second, the rpmsg channel becomes live as soon as the driver
is bound, so fastrpc_rpmsg_callback() can fire before dev_set_drvdata()
is called at all, resulting in dev_get_drvdata() returning NULL.
Fix both issues by moving all cctx initialization ahead of
dev_set_drvdata() so the structure is fully initialized before it
becomes visible to the callback, and add a NULL check in
fastrpc_rpmsg_callback() as a guard against any remaining window.
Fixes: f6f9279f2b ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable@vger.kernel.org
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260530204528.116920-4-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fastrpc_get_args() uses find_vma() to look up the VMA for a user-provided
pointer and compute a DMA address offset. When the address falls in a gap
before the returned VMA, (ptr & PAGE_MASK) - vma->vm_start underflows,
corrupting the DMA address sent to the DSP.
Replace find_vma() with vma_lookup(), which returns NULL when the address
is not contained within any VMA.
Cc: stable@vger.kernel.org
Fixes: 80f3afd72b ("misc: fastrpc: consider address offset before sending to DSP")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260530204528.116920-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a race between fastrpc_device_release() and the workqueue
that processes DSP responses. When the user closes the file descriptor,
fastrpc_device_release() frees the fastrpc_user structure. Concurrently,
an in-flight DSP invocation can complete and fastrpc_rpmsg_callback()
schedules context cleanup via schedule_work(&ctx->put_work). If the
workqueue runs fastrpc_context_free() in parallel with or after
fastrpc_device_release() has freed the user structure, it dereferences
the freed fastrpc_user. Depending on the state of the context at the
time of the race, any one of the following accesses can be hit:
1. fastrpc_buf_free() calls fastrpc_ipa_to_dma_addr(buf->fl->cctx, ...)
to strip the SID bits from the stored IOVA before passing the
physical address to dma_free_coherent().
2. fastrpc_free_map() reads map->fl->cctx->vmperms[0].vmid to
reconstruct the source permission bitmask needed for the
qcom_scm_assign_mem() call that returns memory from the DSP VM
back to HLOS.
3. fastrpc_free_map() acquires map->fl->lock to safely remove the
map node from the fl->maps list.
The resulting use-after-free manifests as:
pc : fastrpc_buf_free+0x38/0x80 [fastrpc]
lr : fastrpc_context_free+0xa8/0x1b0 [fastrpc]
fastrpc_context_free+0xa8/0x1b0 [fastrpc]
fastrpc_context_put_wq+0x78/0xa0 [fastrpc]
process_one_work+0x180/0x450
worker_thread+0x26c/0x388
Add kref-based reference counting to fastrpc_user. Have each invoke
context take a reference on the user at allocation time and release it
when the context is freed. Release the initial reference in
fastrpc_device_release() at file close. Move the teardown of the user
structure — freeing pending contexts, maps, mmaps, and the channel
context reference — into the kref release callback fastrpc_user_free(),
so that it runs only when the last reference is dropped, regardless of
whether that happens at device close or after the final in-flight
context completes.
Fixes: 6cffd79504 ("misc: fastrpc: Add support for dmabuf exporter")
Cc: stable@kernel.org
Signed-off-by: Anandu Krishnan E <anandu.e@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://patch.msgid.link/20260530204528.116920-2-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The shared lookup-time attribute validator now has a safe caller path for
$VOLUME_NAME corruption: ntfs_write_volume_label() no longer treats
lookup errors as an absent label, and the mount path reinitializes its
search context before continuing to $VOLUME_INFORMATION.
Add $VOLUME_NAME-specific resident value validation. A volume name is
stored as a UTF-16LE string, so reject odd byte lengths, and reject
values longer than the NTFS volume label limit. Empty labels remain
valid.
Also reject non-resident $VOLUME_NAME records. $VOLUME_NAME is required
to be resident, like $FILE_NAME; a crafted non-resident record would
otherwise pass lookup and ntfs_write_volume_label() would remove it as if
it were a normal resident attribute.
Cc: stable@vger.kernel.org # v7.1
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
On mount the volume inode is searched for $VOLUME_NAME and then, reusing
the same search context, for $VOLUME_INFORMATION. The $VOLUME_NAME lookup
is optional and its result is otherwise ignored.
Once lookup-time validation can reject a corrupt $VOLUME_NAME with -EIO,
the search context is left in an undefined state: ntfs_attr_find()
documents that on an actual error @ctx->attr is undefined. Continuing the
$VOLUME_INFORMATION search from that context is not contractually valid.
Reinitialize the search context before the $VOLUME_INFORMATION lookup so
it always starts from a well-defined state regardless of the
$VOLUME_NAME lookup outcome.
Cc: stable@vger.kernel.org # v7.1
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_write_volume_label() removes an existing $VOLUME_NAME attribute and
then adds the replacement. The old code only distinguished lookup success
from all other results, so any lookup error was treated like an absent
label and the add path still ran.
That is unsafe once lookup-time validation rejects corrupt $VOLUME_NAME
records with -EIO: the corrupt record would remain in place and a second
$VOLUME_NAME record could be appended next to it.
Only add the replacement after the old label was removed successfully or
after lookup returned -ENOENT. Propagate all other lookup errors, and
also stop if removing the old attribute fails.
Cc: stable@vger.kernel.org # v7.1
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
ntfs_attr_find() and ntfs_external_attr_find() check that generic
resident attribute values fit in their attribute records and that
fixed-size resident values are large enough. For variable-length resident
formats, however, the fixed part is not enough: embedded length fields
can still point callers past the resident value.
A crafted image can set a small resident $FILE_NAME value_length while
leaving file_name_length large. Callers then trust file_name_length and
read past the resident value when converting or comparing the name. This
was reproduced with a crafted image under KASAN as a slab-out-of-bounds
read from the kmalloc-1k MFT record copy. The stack included
ntfs_lookup(), ntfs_iget(), ntfs_read_locked_inode(), ntfs_attr_name_get(),
ntfs_ucstonls(), and utf16s_to_utf8s().
Add a shared attribute value validator and use it before a lookup path
can return an attribute, including the AT_UNUSED enumeration case where
callers inspect returned attributes directly. The helper validates
resident value bounds, minimum resident value sizes, variable-length
$FILE_NAME fields, and non-resident mapping-pairs metadata that was
previously checked separately in both lookup paths.
This also preserves the intended resident @val matching semantics in the
external attribute lookup path. The old duplicated validation block
overwrote the actual resident value length with the type-specific minimum
length before comparing @val, so variable-length resident values could
fail to match even when the bytes were identical. Keep the comparison on
the actual value length, and make ntfs_attrlist_entry_add() compare
resident attributes with lowest_vcn zero instead of reading the
non-resident union member after a successful resident match.
Reject non-resident $FILE_NAME records too: the format requires
$FILE_NAME to be resident and callers treat returned records as resident.
Cc: stable@vger.kernel.org # v7.1
Fixes: 6ceb4cc81e ("ntfs: add bound checking to ntfs_attr_find")
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
