commit 33e321586e upstream.
After xHC controller is started, either in probe or resume, it can take
a while before any of the connected usb devices are visible to the roothub
due to link training.
It's possible xhci driver loads, sees no acivity and suspends the host
before the USB device is visible.
In one testcase with a hotplugged xHC controller the host finally detected
the connected USB device and generated a wake 500ms after host initial
start.
If hosts didn't suspend the device duringe training it probablty wouldn't
take up to 500ms to detect it, but looking at specs reveal USB3 link
training has a couple long timeout values, such as 120ms
RxDetectQuietTimeout, and 360ms PollingLFPSTimeout.
So Add a 500ms grace period that keeps polling the roothub for 500ms after
start, preventing runtime suspend until USB devices are detected.
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bad0d1d726 upstream.
This adds the necessary PCI device ID for the controller
inside the Intel Raptor Lake CPU block. The controllers that
are part of the PCH (chipset) have separate device IDs.
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20220815123334.87526-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 93a3c0d4e8 upstream.
Only Thunderbolt 3 routers need the xHCI connection flow. This also
ensures the router actually has both lane adapters (1 and 3). While
there move declaration of the boolean variables inside the block where
they are being used.
Fixes: 30a4eca69b ("thunderbolt: Add internal xHCI connect flows for Thunderbolt 3 devices")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb100b8fa8 upstream.
The received notification packet is held in pkg->buffer and not in pkg
itself. Fix this by using the correct buffer.
Fixes: 81a54b5e19 ("thunderbolt: Let the connection manager handle all notifications")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe8f65b018 upstream.
Xen blkfront advertises its support of the persistent grants feature
when it first setting up and when resuming in 'talk_to_blkback()'.
Then, blkback reads the advertised value when it connects with blkfront
and decides if it will use the persistent grants feature or not, and
advertises its decision to blkfront. Blkfront reads the blkback's
decision and it also makes the decision for the use of the feature.
Commit 402c43ea6b ("xen-blkfront: Apply 'feature_persistent' parameter
when connect"), however, made the blkfront's read of the parameter for
disabling the advertisement, namely 'feature_persistent', to be done
when it negotiate, not when advertise. Therefore blkfront advertises
without reading the parameter. As the field for caching the parameter
value is zero-initialized, it always advertises as the feature is
disabled, so that the persistent grants feature becomes always disabled.
This commit fixes the issue by making the blkfront does parmeter caching
just before the advertisement.
Fixes: 402c43ea6b ("xen-blkfront: Apply 'feature_persistent' parameter when connect")
Cc: <stable@vger.kernel.org> # 5.10.x
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-4-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f5e0fe5d0 upstream.
The advertisement of the persistent grants feature (writing
'feature-persistent' to xenbus) should mean not the decision for using
the feature but only the availability of the feature. However, commit
74a852479c ("xen-blkfront: add a parameter for disabling of persistent
grants") made a field of blkfront, which was a place for saving only the
negotiation result, to be used for yet another purpose: caching of the
'feature_persistent' parameter value. As a result, the advertisement,
which should follow only the parameter value, becomes inconsistent.
This commit fixes the misuse of the semantic by making blkfront saves
the parameter value in a separate place and advertises the support based
on only the saved value.
Fixes: 74a852479c ("xen-blkfront: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-3-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06ba5d2e94 upstream.
The advertisement of the persistent grants feature (writing
'feature-persistent' to xenbus) should mean not the decision for using
the feature but only the availability of the feature. However, commit
aac8a70db2 ("xen-blkback: add a parameter for disabling of persistent
grants") made a field of blkback, which was a place for saving only the
negotiation result, to be used for yet another purpose: caching of the
'feature_persistent' parameter value. As a result, the advertisement,
which should follow only the parameter value, becomes inconsistent.
This commit fixes the misuse of the semantic by making blkback saves the
parameter value in a separate place and advertises the support based on
only the saved value.
Fixes: aac8a70db2 ("xen-blkback: add a parameter for disabling of persistent grants")
Cc: <stable@vger.kernel.org> # 5.10.x
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220831165824.94815-2-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8782fb61cc ]
The mmap lock protects the page walker from changes to the page tables
during the walk. However a read lock is insufficient to protect those
areas which don't have a VMA as munmap() detaches the VMAs before
downgrading to a read lock and actually tearing down PTEs/page tables.
For users of walk_page_range() the solution is to simply call pte_hole()
immediately without checking the actual page tables when a VMA is not
present. We now never call __walk_page_range() without a valid vma.
For walk_page_range_novma() the locking requirements are tightened to
require the mmap write lock to be taken, and then walking the pgd
directly with 'no_vma' set.
This in turn means that all page walkers either have a valid vma, or
it's that special 'novma' case for page table debugging. As a result,
all the odd '(!walk->vma && !walk->no_vma)' tests can be removed.
Fixes: dd2283f260 ("mm: mmap: zap pages with read mmap_sem in munmap")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9ea0b30ad ]
The change from kcalloc() to kvmalloc() means that arg->nr_pages
might now be large enough that the "args->nr_pages << PAGE_SHIFT" can
result in an integer overflow.
Fixes: b3f7931f5c ("xen/gntdev: switch from kcalloc() to kvcalloc()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/YxDROJqu/RPvR0bi@kili
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cf07810e9 ]
Clang warns:
arch/powerpc/platforms/pseries/papr_scm.c:492:6: warning: variable 'rc' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!p->stat_buffer_len)
^~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/pseries/papr_scm.c:523:64: note: uninitialized use occurs here
dev_info(&p->pdev->dev, "nvdimm pmu didn't register rc=%d\n", rc);
^~
include/linux/dev_printk.h:150:67: note: expanded from macro 'dev_info'
dev_printk_index_wrap(_dev_info, KERN_INFO, dev, dev_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~~
include/linux/dev_printk.h:110:23: note: expanded from macro 'dev_printk_index_wrap'
_p_func(dev, fmt, ##__VA_ARGS__); \
^~~~~~~~~~~
arch/powerpc/platforms/pseries/papr_scm.c:492:2: note: remove the 'if' if its condition is always false
if (!p->stat_buffer_len)
^~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/platforms/pseries/papr_scm.c:484:8: note: initialize the variable 'rc' to silence this warning
int rc, nodeid;
^
= 0
1 warning generated.
The call to papr_scm_pmu_check_events() was eliminated but a return code
was not added to the if statement. Add the same return code from
papr_scm_pmu_check_events() for this condition so there is no more
warning.
Fixes: 9b1ac04698 ("powerpc/papr_scm: Fix nvdimm event mappings")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1701
Link: https://lore.kernel.org/r/20220830151256.1473169-1-nathan@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0204750bd4 ]
KVM should not claim to virtualize unknown IA32_ARCH_CAPABILITIES
bits. When kvm_get_arch_capabilities() was originally written, there
were only a few bits defined in this MSR, and KVM could virtualize all
of them. However, over the years, several bits have been defined that
KVM cannot just blindly pass through to the guest without additional
work (such as virtualizing an MSR promised by the
IA32_ARCH_CAPABILITES feature bit).
Define a mask of supported IA32_ARCH_CAPABILITIES bits, and mask off
any other bits that are set in the hardware MSR.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 5b76a3cff0 ("KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry")
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Vipin Sharma <vipinsh@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20220830174947.2182144-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee0175b3b4 ]
By using 16-bit I/O on the GPIO peripheral, which is apparently not safe
on MIPS, the IMR can end up containing garbage. This then results in
interrupt triggers for lines that don't have an interrupt handler
associated. The irq_desc lookup fails, and the ISR will not be cleared,
keeping the CPU busy until reboot, or until another IMR operation
restores the correct value. This situation appears to happen very
rarely, for < 0.5% of IMR writes.
Instead of using 8-bit or 16-bit I/O operations on the 32-bit memory
mapped peripheral registers, switch to using 32-bit I/O only, operating
on the entire bank for all single bit line settings. For 2-bit line
settings, with 16-bit port values, stick to manual (un)packing.
This issue has been seen on RTL8382M (HPE 1920-16G), RTL8391M (Netgear
GS728TP v2), and RTL8393M (D-Link DGS-1210-52 F3, Zyxel GS1900-48).
Reported-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> # DGS-1210-52
Reported-by: Birger Koblitz <mail@birger-koblitz.de> # GS728TP
Reported-by: Jan Hoffmann <jan@3e8.eu> # 1920-16G
Fixes: 0d82fb1127 ("gpio: Add Realtek Otto GPIO support")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 518e26f11a ]
The regcache sync will set the cache_bypass = true, at that
time, when there is regmap write operation, it will bypass
the regmap cache, then the regcache sync will write back the
value from cache to register, which is not as our expectation.
Though regmap already use its internal lock to avoid such issue,
but this driver force disable the regmap internal lock in its
regmap config: disable_locking = true
To avoid this issue, use the driver's own lock to do the protect
in system PM.
Fixes: b765743005 ("gpio: pca953x: Restore registers after suspend/resume cycle")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc16355560 ]
The while loop in raspberrypi_discover_clocks() relies on the assumption
that the id of the last clock element is zero. Because this data comes
from the Videocore firmware and it doesn't guarantuee such a behavior
this could lead to out-of-bounds access. So fix this by providing
a sentinel element.
Fixes: 93d2725aff ("clk: bcm: rpi: Discover the firmware clocks")
Link: https://github.com/raspberrypi/firmware/issues/1688
Suggested-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220713154953.3336-2-stefan.wahren@i2se.com
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Ivan T. Ivanov <iivanov@suse.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35f73cca1c ]
The function raspberrypi_fw_get_rate (e.g. used for the recalc_rate
hook) can fail to get the clock rate from the firmware. In this case
we cannot return a signed error value, which would be casted to
unsigned long. Fix this by returning 0 instead.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20220625083643.4012-1-stefan.wahren@i2se.com
Fixes: 4e85e535e6 ("clk: bcm283x: add driver interfacing with Raspberry Pi's firmware")
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b1ac04698 ]
Commit 4c08d4bbc0 ("powerpc/papr_scm: Add perf interface support")
added performance monitoring support for papr-scm nvdimm devices via
perf interface. Commit also added an array in papr_scm_priv
structure called "nvdimm_events_map", which got filled based on the
result of H_SCM_PERFORMANCE_STATS hcall.
Currently there is an assumption that the order of events in the
stats buffer, returned by the hypervisor is same. And order also
happens to matches with the events specified in nvdimm driver code.
But this assumption is not documented in Power Architecture
Platform Requirements (PAPR) document. Although the order
of events happens to be same on current generation od system, but
it might not be true in future generation systems. Fix the issue, by
adding a static mapping for nvdimm events to corresponding stat-id,
and removing the dynamic map from papr_scm_priv structure. Also
remove the function papr_scm_pmu_check_events from papr_scm.c file,
as we no longer need to copy stat-ids dynamically.
Fixes: 4c08d4bbc0 ("powerpc/papr_scm: Add perf interface support")
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220804074852.55157-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99077ad668 ]
Add the module alias so the rk805-pwrkey driver will
autoload when built as a module.
Fixes: 5a35b85c2d ("Input: add power key driver for Rockchip RK805 PMIC")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b592061f7 ]
In the original commit 9a34b45397 ("clk: Add support for runtime PM"),
the commit message mentioned that pm_runtime_put_sync() would be done
at the end of clk_core_unprepare(). This mirrors the operations in
clk_core_prepare() in the opposite order.
However, the actual code that was added wasn't in the order the commit
message described. Move clk_pm_runtime_put() to the end of
clk_core_unprepare() so that it is in the correct order.
Fixes: 9a34b45397 ("clk: Add support for runtime PM")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220822081424.1310926-3-wenst@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35b0fac808 ]
In the previous commits that added CLK_OPS_PARENT_ENABLE, support for
this flag was only added to rate change operations (rate setting and
reparent) and disabling unused subtree. It was not added to the
clock gate related operations. Any hardware driver that needs it for
these operations will either see bogus results, or worse, hang.
This has been seen on MT8192 and MT8195, where the imp_ii2_* clk
drivers set this, but dumping debugfs clk_summary would cause it
to hang.
Fixes: fc8726a2c0 ("clk: core: support clocks which requires parents enable (part 2)")
Fixes: a4b3518d14 ("clk: core: support clocks which requires parents enable (part 1)")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220822081424.1310926-2-wenst@chromium.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 233f56745b ]
There is a spelling mistake in a gvt_vgpu_err error message. Fix it.
Fixes: 695fbc08d8 ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220315202449.2952845-1-colin.i.king@gmail.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26f2da0d2f ]
For ti_find_clock_provider() we want to return the np with refcount
incremented. However we are missing of_node_get() for the
clock-output-names case that causes refcount warnings.
Fixes: 51f661ef9a ("clk: ti: Add ti_find_clock_provider() to use clock-output-names")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220621091118.33930-1-tony@atomide.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e5e56c60a ]
Sparse complains about missing statics in the declarations of several
variables:
arch/riscv/kvm/vcpu_sbi_replace.c:38:37: warning: symbol 'vcpu_sbi_ext_time' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_replace.c:73:37: warning: symbol 'vcpu_sbi_ext_ipi' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_replace.c:126:37: warning: symbol 'vcpu_sbi_ext_rfence' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_replace.c:170:37: warning: symbol 'vcpu_sbi_ext_srst' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_base.c:69:37: warning: symbol 'vcpu_sbi_ext_base' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_base.c:90:37: warning: symbol 'vcpu_sbi_ext_experimental' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_base.c:96:37: warning: symbol 'vcpu_sbi_ext_vendor' was not declared. Should it be static?
arch/riscv/kvm/vcpu_sbi_hsm.c:115:37: warning: symbol 'vcpu_sbi_ext_hsm' was not declared. Should it be static?
These variables are however used in vcpu_sbi.c where they are declared
as extern. Move them to kvm_vcpu_sbi.h which is handily already
included by the three other files.
Fixes: a046c2d857 ("RISC-V: KVM: Reorganize SBI code by moving SBI v0.1 to its own file")
Fixes: 5f862df558 ("RISC-V: KVM: Add v0.1 replacement SBI extensions defined in v0.2")
Fixes: 3e1d86569c ("RISC-V: KVM: Add SBI HSM extension in KVM")
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 020dac4187 ]
Regardless of the 'msr' argument passed to the VMX version of
msr_write_intercepted(), the function always checks to see if a
specific MSR (IA32_SPEC_CTRL) is intercepted for write. This behavior
seems unintentional and unexpected.
Modify the function so that it checks to see if the provided 'msr'
index is intercepted for write.
Fixes: 67f4b9969c ("KVM: nVMX: Handle dynamic MSR intercept toggling")
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220810213050.2655000-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 27893dfc12 upstream.
In some cases of failure (dialect mismatches) in SMB2_negotiate(), after
the request is sent, the checks would return -EIO when they should be
rather setting rc = -EIO and jumping to neg_exit to free the response
buffer from mempool.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Cc: stable@vger.kernel.org
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1da52815d5 upstream.
Syzbot reported a couple issues introduced by commit 44e602b4e5
("binder_alloc: add missing mmap_lock calls when using the VMA"), in
which we attempt to acquire the mmap_lock when alloc->vma_vm_mm has not
been initialized yet.
This can happen if a binder_proc receives a transaction without having
previously called mmap() to setup the binder_proc->alloc space in [1].
Also, a similar issue occurs via binder_alloc_print_pages() when we try
to dump the debugfs binder stats file in [2].
Sample of syzbot's crash report:
==================================================================
KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f]
CPU: 0 PID: 3755 Comm: syz-executor229 Not tainted 6.0.0-rc1-next-20220819-syzkaller #0
syz-executor229[3755] cmdline: ./syz-executor2294415195
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
RIP: 0010:__lock_acquire+0xd83/0x56d0 kernel/locking/lockdep.c:4923
[...]
Call Trace:
<TASK>
lock_acquire kernel/locking/lockdep.c:5666 [inline]
lock_acquire+0x1ab/0x570 kernel/locking/lockdep.c:5631
down_read+0x98/0x450 kernel/locking/rwsem.c:1499
mmap_read_lock include/linux/mmap_lock.h:117 [inline]
binder_alloc_new_buf_locked drivers/android/binder_alloc.c:405 [inline]
binder_alloc_new_buf+0xa5/0x19e0 drivers/android/binder_alloc.c:593
binder_transaction+0x242e/0x9a80 drivers/android/binder.c:3199
binder_thread_write+0x664/0x3220 drivers/android/binder.c:3986
binder_ioctl_write_read drivers/android/binder.c:5036 [inline]
binder_ioctl+0x3470/0x6d00 drivers/android/binder.c:5323
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...]
==================================================================
Fix these issues by setting up alloc->vma_vm_mm pointer during open()
and caching directly from current->mm. This guarantees we have a valid
reference to take the mmap_lock during scenarios described above.
[1] https://syzkaller.appspot.com/bug?extid=f7dc54e5be28950ac459
[2] https://syzkaller.appspot.com/bug?extid=a75ebe0452711c9e56d9
Fixes: 44e602b4e5 ("binder_alloc: add missing mmap_lock calls when using the VMA")
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: syzbot+f7dc54e5be28950ac459@syzkaller.appspotmail.com
Reported-by: syzbot+a75ebe0452711c9e56d9@syzkaller.appspotmail.com
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20220829201254.1814484-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a0e44c64b6 upstream.
A transaction of type BINDER_TYPE_WEAK_HANDLE can fail to increment the
reference for a node. In this case, the target proc normally releases
the failed reference upon close as expected. However, if the target is
dying in parallel the call will race with binder_deferred_release(), so
the target could have released all of its references by now leaving the
cleanup of the new failed reference unhandled.
The transaction then ends and the target proc gets released making the
ref->proc now a dangling pointer. Later on, ref->node is closed and we
attempt to take spin_lock(&ref->proc->inner_lock), which leads to the
use-after-free bug reported below. Let's fix this by cleaning up the
failed reference on the spot instead of relying on the target to do so.
==================================================================
BUG: KASAN: use-after-free in _raw_spin_lock+0xa8/0x150
Write of size 4 at addr ffff5ca207094238 by task kworker/1:0/590
CPU: 1 PID: 590 Comm: kworker/1:0 Not tainted 5.19.0-rc8 #10
Hardware name: linux,dummy-virt (DT)
Workqueue: events binder_deferred_func
Call trace:
dump_backtrace.part.0+0x1d0/0x1e0
show_stack+0x18/0x70
dump_stack_lvl+0x68/0x84
print_report+0x2e4/0x61c
kasan_report+0xa4/0x110
kasan_check_range+0xfc/0x1a4
__kasan_check_write+0x3c/0x50
_raw_spin_lock+0xa8/0x150
binder_deferred_func+0x5e0/0x9b0
process_one_work+0x38c/0x5f0
worker_thread+0x9c/0x694
kthread+0x188/0x190
ret_from_fork+0x10/0x20
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Cc: stable <stable@kernel.org> # 4.14+
Link: https://lore.kernel.org/r/20220801182511.3371447-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63f1560930 upstream.
If re-initialization results is a different signal voltage, because the
voltage switch failed previously, but not this time (or vice versa), then
sd3_bus_mode will be inconsistent with the card because the SD_SWITCH
command is done only upon first initialization.
Fix by always reading SD_SWITCH information during re-initialization, which
also means it does not need to be re-read later for the 1.8V fixup
workaround.
Note, brief testing showed SD_SWITCH took about 1.8ms to 2ms which added
about 1% to 1.5% to the re-initialization time, so it's not particularly
significant.
Reported-by: Seunghui Lee <sh043.lee@samsung.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Seunghui Lee <sh043.lee@samsung.com>
Tested-by: Seunghui Lee <sh043.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220815073321.63382-3-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15c56208c7 upstream.
When introduced, upon success, the 1.8V fixup workaround in
mmc_sd_init_card() would branch to practically the end of the function, to
a label named "done". Unfortunately, perhaps due to the label name, over
time new code has been added that really should have come after "done" not
before it. Let's fix the problem by moving the label to the correct place
and rename it "cont".
Fixes: 045d705dc1 ("mmc: core: Enable the MMC host software queue for the SD card")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Seunghui Lee <sh043.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220815073321.63382-2-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55e55920bb upstream.
This change fixes a mis-handling of the LANDLOCK_ACCESS_FS_REFER right
when multiple rulesets/domains are stacked. The expected behaviour was
that an additional ruleset can only restrict the set of permitted
operations, but in this particular case, it was potentially possible to
re-gain the LANDLOCK_ACCESS_FS_REFER right.
With the introduction of LANDLOCK_ACCESS_FS_REFER, we added the first
globally denied-by-default access right. Indeed, this lifted an initial
Landlock limitation to rename and link files, which was initially always
denied when the source or the destination were different directories.
This led to an inconsistent backward compatibility behavior which was
only taken into account if no domain layer were using the new
LANDLOCK_ACCESS_FS_REFER right. However, when restricting a thread with
a new ruleset handling LANDLOCK_ACCESS_FS_REFER, all inherited parent
rulesets/layers not explicitly handling LANDLOCK_ACCESS_FS_REFER would
behave as if they were handling this access right and with all their
rules allowing it. This means that renaming and linking files could
became allowed by these parent layers, but all the other required
accesses must also be granted: all layers must allow file removal or
creation, and renaming and linking operations cannot lead to privilege
escalation according to the Landlock policy. See detailed explanation
in commit b91c3e4ea7 ("landlock: Add support for file reparenting with
LANDLOCK_ACCESS_FS_REFER").
To say it another way, this bug may lift the renaming and linking
limitations of the initial Landlock version, and a same ruleset can
enforce different restrictions depending on previous or next enforced
ruleset (i.e. inconsistent behavior). The LANDLOCK_ACCESS_FS_REFER right
cannot give access to data not already allowed, but this doesn't follow
the contract of the first Landlock ABI. This fix puts back the
limitation for sandboxes that didn't opt-in for this additional right.
For instance, if a first ruleset allows LANDLOCK_ACCESS_FS_MAKE_REG on
/dst and LANDLOCK_ACCESS_FS_REMOVE_FILE on /src, renaming /src/file to
/dst/file is denied. However, without this fix, stacking a new ruleset
which allows LANDLOCK_ACCESS_FS_REFER on / would now permit the
sandboxed thread to rename /src/file to /dst/file .
This change fixes the (absolute) rule access rights, which now always
forbid LANDLOCK_ACCESS_FS_REFER except when it is explicitly allowed
when creating a rule.
Making all domain handle LANDLOCK_ACCESS_FS_REFER was an initial
approach but there is two downsides:
* it makes the code more complex because we still want to check that a
rule allowing LANDLOCK_ACCESS_FS_REFER is legitimate according to the
ruleset's handled access rights (i.e. ABI v1 != ABI v2);
* it would not allow to identify if the user created a ruleset
explicitly handling LANDLOCK_ACCESS_FS_REFER or not, which will be an
issue to audit Landlock.
Instead, this change adds an ACCESS_INITIALLY_DENIED list of
denied-by-default rights, which (only) contains
LANDLOCK_ACCESS_FS_REFER. All domains are treated as if they are also
handling this list, but without modifying their fs_access_masks field.
A side effect is that the errno code returned by rename(2) or link(2)
*may* be changed from EXDEV to EACCES according to the enforced
restrictions. Indeed, we now have the mechanic to identify if an access
is denied because of a required right (e.g. LANDLOCK_ACCESS_FS_MAKE_REG,
LANDLOCK_ACCESS_FS_REMOVE_FILE) or if it is denied because of missing
LANDLOCK_ACCESS_FS_REFER rights. This may result in different errno
codes than for the initial Landlock version, but this approach is more
consistent and better for rename/link compatibility reasons, and it
wasn't possible before (hence no backport to ABI v1). The
layout1.rename_file test reflects this change.
Add 4 layout1.refer_denied_by_default* test suites to check that the
behavior of a ruleset not handling LANDLOCK_ACCESS_FS_REFER (ABI v1) is
unchanged even if another layer handles LANDLOCK_ACCESS_FS_REFER (i.e.
ABI v1 precedence). Make sure rule's absolute access rights are correct
by testing with and without a matching path. Add test_rename() and
test_exchange() helpers.
Extend layout1.inval tests to check that a denied-by-default access
right is not necessarily part of a domain's handled access rights.
Test coverage for security/landlock is 95.3% of 599 lines according to
gcc/gcov-11.
Fixes: b91c3e4ea7 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Reviewed-by: Paul Moore <paul@paul-moore.com>
Reviewed-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20220831203840.1370732-1-mic@digikod.net
Cc: stable@vger.kernel.org
[mic: Constify and slightly simplify test helpers]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 001047ea24 upstream.
works perfectly with:
modprobe ftdi_sio
echo "0590 00b2" | tee
/sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null
but doing this every reboot is a pain in the ass.
Signed-off-by: Niek Nooijens <niek.nooijens@omron.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 789bba82f6 upstream.
In the case of firmware-upload, an instance of struct fw_upload is
allocated in firmware_upload_register(). This data needs to be freed
in fw_dev_release(). Create a new fw_upload_free() function in
sysfs_upload.c to handle the firmware-upload specific memory frees
and incorporate the missing kfree call for the fw_upload structure.
Fixes: 97730bbb24 ("firmware_loader: Add firmware-upload support")
Cc: stable <stable@kernel.org>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220831002518.465274-1-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b40c38e37 upstream.
In the following code within firmware_upload_unregister(), the call to
device_unregister() could result in the dev_release function freeing the
fw_upload_priv structure before it is dereferenced for the call to
module_put(). This bug was found by the kernel test robot using
CONFIG_KASAN while running the firmware selftests.
device_unregister(&fw_sysfs->dev);
module_put(fw_upload_priv->module);
The problem is fixed by copying fw_upload_priv->module to a local variable
for use when calling device_unregister().
Fixes: 97730bbb24 ("firmware_loader: Add firmware-upload support")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20220829174557.437047-1-russell.h.weight@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d245f43aab upstream.
The probe session-duplication overflow check incremented the session
count also when there were no more available sessions so that memory
beyond the fixed-size slab-allocated session array could be corrupted in
fastrpc_session_alloc() on open().
Fixes: f6f9279f2b ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable@vger.kernel.org # 5.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220829080531.29681-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9baa1415d9 upstream.
Add the missing sanity check on the probed-session count to avoid
corrupting memory beyond the fixed-size slab-allocated session array
when there are more than FASTRPC_MAX_SESSIONS sessions defined in the
devicetree.
Fixes: f6f9279f2b ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable@vger.kernel.org # 5.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220829080531.29681-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e2238e3ae upstream.
The ADC conversion is actually not rail-to-rail but with a factor 1.5.
Make use of this factor when calculating actual voltage.
Fixes: 3a89b289df ("iio: adc: add support for mcp3911")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220722130726.7627-4-marcus.folkesson@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cfbd76d5c9 upstream.
Go for the right property name that is documented in the bindings.
Fixes: 3a89b289df ("iio: adc: add support for mcp3911")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220722130726.7627-3-marcus.folkesson@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22b4277641 upstream.
The ad7292 tries to add an devm_action for disabling a regulator at
device detach using devm_add_action_or_reset(). The
devm_add_action_or_reset() does call the release function should adding
action fail. The driver inspects the value returned by
devm_add_action_or_reset() and manually calls regulator_disable() if
adding the action has failed. This leads to double disable and messes
the enable count for regulator.
Do not manually call disable if devm_add_action_or_reset() fails.
Fixes: 506d2e317a ("iio: adc: Add driver support for AD7292")
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/Yv9O+9sxU7gAv3vM@fedora
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 160905549e upstream.
The commit in Fixes also introduced a new error handling path which should
goto the existing error handling path.
Otherwise some resources leak.
Fixes: 0d31d91e61 ("iio: light: cm3605: Make use of the helper function dev_err_probe()")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/0e186de2c125b3e17476ebf9c54eae4a5d66f994.1659854238.git.christophe.jaillet@wanadoo.fr
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98e0121570 upstream.
syzbot is reporting hung task at __input_unregister_device() [1], for
iforce_close() waiting at wait_event_interruptible() with dev->mutex held
is blocking input_disconnect_device() from __input_unregister_device().
It seems that the cause is simply that commit c2b27ef672 ("Input:
iforce - wait for command completion when closing the device") forgot to
call wake_up() after clear_bit().
Fix this problem by introducing a helper that calls clear_bit() followed
by wake_up_all().
Reported-by: syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com>
Fixes: c2b27ef672 ("Input: iforce - wait for command completion when closing the device")
Tested-by: syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Co-developed-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/887021c3-4f13-40ce-c8b9-aa6e09faa3a7@I-love.SAKURA.ne.jp
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5a2e08343 upstream.
When the user initializes the uart port, and waits for the transmit
engine to complete in lpuart32_set_termios(), if the UART TX fifo has
dirty data and the UARTMODIR enable the flow control, the TX fifo may
never be empty. So here we should disable the flow control first to make
sure the transmit engin can complete.
Fixes: 380c966c09 ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/20220821101527.10066-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3f2fd2274 upstream.
Turning on NOP_USB_XCEIV as builtin broke the TUSB6010 driver because
of an older issue with the depencency.
It is not necessary to forbid NOP_USB_XCEIV=y in combination with
USB_MUSB_HDRC=m, but only the reverse, which causes the link failure
from the original Kconfig change.
Use the correct dependency to still allow NOP_USB_XCEIV=n or
NOP_USB_XCEIV=y but forbid NOP_USB_XCEIV=m when USB_MUSB_HDRC=m
to fix the multi_v7_defconfig for tusb.
Fixes: ab37a7a890 ("ARM: multi_v7_defconfig: Make NOP_USB_XCEIV driver built-in")
Fixes: c044247965 ("usb: musb: Fix randconfig build issues for Kconfig options")
Cc: stable <stable@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220818135737.3143895-10-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 566f9c9f89 upstream.
When changing the console font with ioctl(KDFONTOP) the new font size
can be bigger than the previous font. A previous selection may thus now
be outside of the new screen size and thus trigger out-of-bounds
accesses to graphics memory if the selection is removed in
vc_do_resize().
Prevent such out-of-memory accesses by dropping the selection before the
various con_font_set() console handlers are called.
Reported-by: syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com
Cc: stable <stable@kernel.org>
Tested-by: Khalid Masum <khalid.masum.92@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91926d8b7e upstream.
The semi-recent changes to MSR handling when entering RTAS (firmware)
cause crashes on IBM Cell machines. An example trace:
kernel tried to execute user page (2fff01a8) - exploit attempt? (uid: 0)
BUG: Unable to handle kernel instruction fetch
Faulting instruction address: 0x2fff01a8
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=4 NUMA Cell
Modules linked in:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 6.0.0-rc2-00433-gede0a8d3307a #207
NIP: 000000002fff01a8 LR: 0000000000032608 CTR: 0000000000000000
REGS: c0000000015236b0 TRAP: 0400 Tainted: G W (6.0.0-rc2-00433-gede0a8d3307a)
MSR: 0000000008001002 <ME,RI> CR: 00000000 XER: 20000000
...
NIP 0x2fff01a8
LR 0x32608
Call Trace:
0xc00000000143c5f8 (unreliable)
.rtas_call+0x224/0x320
.rtas_get_boot_time+0x70/0x150
.read_persistent_clock64+0x114/0x140
.read_persistent_wall_and_boot_offset+0x24/0x80
.timekeeping_init+0x40/0x29c
.start_kernel+0x674/0x8f0
start_here_common+0x1c/0x50
Unlike PAPR platforms where RTAS is only used in guests, on the IBM Cell
machines Linux runs with MSR[HV] set but also uses RTAS, provided by
SLOF.
Fix it by copying the MSR[HV] bit from the MSR value we've just read
using mfmsr into the value used for RTAS.
It seems like we could also fix it using an #ifdef CELL to set MSR[HV],
but that doesn't work because it's possible to build a single kernel
image that runs on both Cell native and pseries.
Fixes: b6b1c3ce06 ("powerpc/rtas: Keep MSR[RI] set when calling RTAS")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Jordan Niethe <jniethe5@gmail.com>
Link: https://lore.kernel.org/r/20220823115952.1203106-2-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c7acee3d2f upstream.
Christophe Leroy reported that commit 7b4537199a ("kbuild: link
symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS") broke
mpc85xx_defconfig + CONFIG_RELOCATABLE=y.
LD vmlinux
SYSMAP System.map
SORTTAB vmlinux
CHKREL vmlinux
WARNING: 451 bad relocations
c0b312a9 R_PPC_UADDR32 .head.text-0x3ff9ed54
c0b312ad R_PPC_UADDR32 .head.text-0x3ffac224
c0b312b1 R_PPC_UADDR32 .head.text-0x3ffb09f4
c0b312b5 R_PPC_UADDR32 .head.text-0x3fe184dc
c0b312b9 R_PPC_UADDR32 .head.text-0x3fe183a8
...
The compiler emits a bunch of R_PPC_UADDR32, which is not supported by
arch/powerpc/kernel/reloc_32.S.
The reason is there exists an unaligned symbol.
$ powerpc-linux-gnu-nm -n vmlinux
...
c0b31258 d spe_aligninfo
c0b31298 d __func__.0
c0b312a9 D sys_call_table
c0b319b8 d __func__.0
Commit 7b4537199a is not the root cause. Even before that, I can
reproduce the same issue for mpc85xx_defconfig + CONFIG_RELOCATABLE=y
+ CONFIG_MODVERSIONS=n.
It is just that nobody noticed because when CONFIG_MODVERSIONS is
enabled, a __crc_* symbol inserted before sys_call_table was hiding the
unalignment issue.
Adding alignment to the syscall table for ppc32 fixes the issue.
Cc: stable@vger.kernel.org
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Trim change log discussion, add Cc stable]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/lkml/38605f6a-a568-f884-f06f-ea4da5b214f0@csgroup.eu/
Link: https://lore.kernel.org/r/20220820165129.1147589-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 310d1344e3 upstream.
This reverts commit 79b74a6848.
It broke booting on IBM Cell machines when the kernel is also built with
CONFIG_PPC_PS3=y.
That's because FW_FEATURE_NATIVE_ALWAYS = 0 does have an important
effect, which is to clear the PS3 ALWAYS features from
FW_FEATURE_ALWAYS.
Note that CONFIG_PPC_NATIVE has since been renamed
CONFIG_PPC_HASH_MMU_NATIVE.
Fixes: 79b74a6848 ("powerpc: Remove unused FW_FEATURE_NATIVE references")
Cc: stable@vger.kernel.org # v5.17+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220823115952.1203106-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b2fa9e13bb upstream.
The old rtl8188eu module, removed in commit 55dfa29b43 ("staging:
rtl8188eu: remove rtl8188eu driver from staging dir") (Linux kernel
v5.15-rc1), required (through a MODULE_FIRMWARE call()) the
rtlwifi/rtl8188eufw.bin firmware file, which the new r8188eu driver no
longer requires.
I have tested a few RTL8188EUS-based Wi-Fi cards and, while supported by
both drivers, they do not work when using the new one and the firmware
wasn't manually loaded. According to Larry Finger, the module
maintainer, all such cards need the firmware and the driver should
depend on it (see the linked mails).
Add a proper MODULE_FIRMWARE() call, like it was done in the old driver.
Thanks to Greg Kroah-Hartman and Larry Finger for quick responses to my
questions.
Cc: stable <stable@kernel.org>
Link: https://answers.launchpad.net/ubuntu/+source/linux-meta-hwe-5.15/+question/702611
Link: https://lore.kernel.org/lkml/YukkBu3TNODO3or9@nx64de-df6d00/
Signed-off-by: Grzegorz Szymaszek <gszymaszek@short.pl>
Link: https://lore.kernel.org/r/YulcdKfhA8dPQ78s@nx64de-df6d00
Acked-by: Phillip Potter <phil@philpotter.co.uk>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
