One of the "legitimate" uses of strncpy() is copying a NUL-terminated
string into a fixed-size non-NUL-terminated character array. To avoid
the weaknesses and ambiguity of intent when using strncpy(), provide
replacement functions that explicitly distinguish between trailing
padding and not, and require the destination buffer size be discoverable
by the compiler.
For example:
struct obj {
int foo;
char small[4] __nonstring;
char big[8] __nonstring;
int bar;
};
struct obj p;
/* This will truncate to 4 chars with no trailing NUL */
strncpy(p.small, "hello", sizeof(p.small));
/* p.small contains 'h', 'e', 'l', 'l' */
/* This will NUL pad to 8 chars. */
strncpy(p.big, "hello", sizeof(p.big));
/* p.big contains 'h', 'e', 'l', 'l', 'o', '\0', '\0', '\0' */
When the "__nonstring" attributes are missing, the intent of the
programmer becomes ambiguous for whether the lack of a trailing NUL
in the p.small copy is a bug. Additionally, it's not clear whether
the trailing padding in the p.big copy is _needed_. Both cases
become unambiguous with:
strtomem(p.small, "hello");
strtomem_pad(p.big, "hello", 0);
See also https://github.com/KSPP/linux/issues/90
Expand the memcpy KUnit tests to include these functions.
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
Under some pathological 32-bit configs, the shift overflow KUnit tests
create huge stack frames. Split up the function to avoid this,
separating by rough shift overflow cases.
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Daniel Latypov <dlatypov@google.com>
Cc: Vitor Massaru Iha <vitor@massaru.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202208301850.iuv9VwA8-lkp@intel.com
Acked-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
When the check_[op]_overflow() helpers were introduced, all arguments
were required to be the same type to make the fallback macros simpler.
However, now that the fallback macros have been removed[1], it is fine
to allow mixed types, which makes using the helpers much more useful,
as they can be used to test for type-based overflows (e.g. adding two
large ints but storing into a u8), as would be handy in the drm core[2].
Remove the restriction, and add additional self-tests that exercise
some of the mixed-type overflow cases, and double-check for accidental
macro side-effects.
[1] https://git.kernel.org/linus/4eb6bd55cfb22ffc20652732340c4962f3ac9a91
[2] https://lore.kernel.org/lkml/20220824084514.2261614-2-gwan-gyeong.mun@intel.com
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: linux-hardening@vger.kernel.org
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Tested-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Add chip specific compatible strings for layerscape platforms to make it
possible to do SoC specific fix-ups in the driver.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Commit c272612cb4 ("kunit: Taint the kernel when KUnit tests are run")
added a new taint flag for when in-kernel tests run. This commit adds
recognition of this new flag in kernel-chktaint.
With this change the correct reason will be reported if the kernel is
tainted because of a test run.
Amended Commit log: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Joe Fradley <joefradley@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The DWC HDMI blocks on R-Car and RZ/G2 SoC's use resets, so to complete
the bindings include resets property.
This also fixes the below warning when running dtbs_check:
arch/arm64/boot/dts/renesas/r8a774b1-hihope-rzg2n-rev2-ex-idk-1110wr.dtb: hdmi@fead0000: Unevaluated properties are not allowed ('resets' was unexpected)
From schema: Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.yaml
While at it mark resets property as required as all the DT sources
in the kernel specify resets and update the example node.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
rcar_mipi_dsi_startup() writes correct values to VCLKSET, but as it uses
or-operation to add the new values to the current value in the register,
it should first make sure the fields are cleared.
Do this by using rcar_mipi_dsi_write() to write the VCLKSET register
with a variable that has all the unused bits zeroed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The rcar crtc depends on the clock provided from the rcar DSI bridge.
When the DSI bridge is disabled, the clock is stopped, which causes the
crtc disable to timeout.
Also, while I have no issue with the enable, the documentation suggests
to enable the DSI before the crtc so that the crtc has its clock enabled
at enable time. This is also not done by the current driver.
To fix this, we need to keep the DSI bridge enabled until the crtc has
disabled itself, and enable the DSI bridge before crtc enables itself.
Add functions rcar_mipi_dsi_pclk_enable and rcar_mipi_dsi_pclk_disable
to the rcar DSI bridge driver which the rcar driver can use to
enable/disable the DSI clock when needed. This is similar to what is
already done with the rcar LVDS bridge.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Improve the DSI shutdown procedure by clearing various bits that were
set while enabling the DSI output. There has been no clear issues caused
by these, but it's safer to ensure that the features are disabled at the
start of the next DSI enable.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The driver does not explicitly stop the video mode transmission when
disabling the output. While this doesn't seem to be causing any issues,
lets follow the steps described in the documentation and add a
rcar_mipi_dsi_stop_video() which stop the video mode transmission. This
function will also be used in later patches to stop the video
transmission even if the DSI IP is not shut down.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The DU driver uses the rcar_lvds_clk_enable() and
rcar_lvds_clk_disable() functions enable or disable the pixel clock
generated by the LVDS encoder, as it requires that clock for proper DU
operation. Rename the functions by replacing "clk" with "pclk" to make
it clearer that they related to the pixel clock.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Use the %p4cc format specifier to print 4CCs, which will provide a more
readable message than the raw hex value.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Commit 841281fe52 ("drm: rcar-du: Drop LVDS device tree backward
compatibility") has removed device tree overlay sources used for
backward compatibility with old bindings, but forgot to remove related
variables from the Makefile. Fix it.
Fixes: 841281fe52 ("drm: rcar-du: Drop LVDS device tree backward compatibility")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
The rcar DU driver on r8a779a0 has a bug causing some specific colors
getting converted to transparent colors, which then (usually) show as
black pixels on the screen.
The reason seems to be that the driver sets PnMR_SPIM_ALP bit in
PnMR.SPIM field, which is an illegal setting on r8a779a0. The
PnMR_SPIM_EOR bit also illegal.
Add a new feature flag for this (lack of a) feature and make sure the
bits are zero on r8a779a0.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
rcar_du_regs.h is not needed by rcar_du_drv.c so drop the include.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
DRM_MODE_BLEND_PIXEL_NONE ignores an alpha channel.
Rcar-du driver supports only 3 formats with an alpha channel
(DRM_FORMAT_ARGB1555, DRM_FORMAT_ARGB8888 and DRM_FORMAT_ARGB4444). We
simply override the format passed to VSP1 for blending with the pixel
format without alpha channel.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Takanari Hayama <taki@igel.co.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
R-Car DU driver implicitly supports DRM_MODE_BLEND_COVERAGE only.
This adds a support for DRM_MODE_BLEND_PREMULTI. As a consequence,
DRM_MODE_BLEND_PREMULTI becomes the default. If DRM_MODE_BLEND_COVERAGE
is desired, it should be set explicitly.
This behavior comes from how DRM blend mode is supported.
drm_plane_create_blend_mode_property() creates the blend mode property
with the default value of DRM_MODE_BLEND_PREMULTI. This default value
cannot be modified from the atomic driver.
Signed-off-by: Takanari Hayama <taki@igel.co.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To support DRM blend mode in R-Car DU driver, we must be able to pass
a plane with the premultiplied alpha. Adding a new property to
vsp1_du_atomic_config allows the R-Car DU driver to pass the
premultiplied alpha plane.
Signed-off-by: Takanari Hayama <taki@igel.co.jp>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
For K3 devices the clock fed into the RNG module is shared with the rest
of the Crypto module, it is not dedicated to the RNG module and cannot be
controlled by the RNG driver. The driver does not require this clock to
always be defined and the DT binding should not force it either.
Remove this so we can start dropping out the clock properties as needed.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20220901171041.32056-1-afd@ti.com
Signed-off-by: Rob Herring <robh@kernel.org>
Some HID++ 2.0 commands had correctly set a non-zero software identifier
directly as part of their function identifiers, but it's more correct to
define the function identifier and the software identifier separately
before combined them when the command is sent.
As this is now done in the previous commit, remove the hard-coded 0x1
software identifiers in the function definitions.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Always set a non-zero "Sw. Id." in the lower nibble of the Function/ASE
and Software Identifier byte in HID++ 2.0 commands.
As per the "Protocol HID++2.0 essential features" section in
https://lekensteyn.nl/files/logitech/logitech_hidpp_2.0_specification_draft_2012-06-04.pdf
"
Software identifier (4 bits, unsigned)
A number uniquely defining the software that sends a request. The
firmware must copy the software identifier in the response but does
not use it in any other ways.
0 Do not use (allows to distinguish a notification from a response).
"
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215699
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Now that all the Logitech Bluetooth devices are probed for HID++
support, remove the handling of those 2 devices without any quirks, as
they're duplicates.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Probe for HID++ support over Bluetooth for all the Logitech Bluetooth
devices. As Logitech doesn't have a list of Bluetooth devices that
support HID++ over Bluetooth, probe every device. The HID++ driver
will fall back to plain HID if the device does not support HID++,
or to a another device-specific driver if it is part of the
unhandled_hidpp_devices array, used in the match function.
Note that this change might cause upower to export 2 batteries for
certain Bluetooth LE devices which export their battery information
through the Bluetooth BATT profile. This particular bug is tracked at:
https://gitlab.freedesktop.org/upower/upower/-/issues/166
Tested with a Logitech Signature M650 mouse, over Bluetooth
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Export hid_match_id() so it can be used in device-specific drivers to
implement their own matching with open-coding a match function.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Allwinner's I2C offload engine includes bidirectional DMA support. Add
the properties for describing this in the devicetree. "dmas" is optional
because not all instances of the controller have their DRQs hooked up.
For example, R_I2C0 and R_I2C1 on V536 have no DRQ number assigned.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Document clocks for SM8450 Camera Control Interface I2C controller.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
All the fixed counters share a fixed control register. The current
perf reads and re-writes the fixed control register for each fixed
counter disable/enable, which is unnecessary.
When changing the fixed control register, the entire PMU must be
disabled via the global control register. The changing cannot be taken
effect until the entire PMU is re-enabled. Only updating the fixed
control register once right before the entire PMU re-enabling is
enough.
The read of the fixed control register is not necessary either. The
value can be cached in the per CPU cpu_hw_events.
Test results:
Counting all the fixed counters with the perf bench sched pipe as below
on a SPR machine.
$perf stat -e cycles,instructions,ref-cycles,slots --no-inherit --
taskset -c 1 perf bench sched pipe
The Total elapsed time reduces from 5.36s (without the patch) to 4.99s
(with the patch), which is ~6.9% improvement.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220804140729.2951259-1-kan.liang@linux.intel.com
Now that it is all internal to the intel driver, remove
x86_pmu::update_topdown_event.
Assumes that is_topdown_count(event) can only be true when the
hardware has topdown stuff and the function is set.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220829101321.771635301@infradead.org
While auditing 6b959ba22d ("perf/core: Fix reentry problem in
perf_output_read_group()") a few spots were found that wanted
assertions.
Notable for_each_sibling_event() relies on exclusion from
modification. This would normally be holding either ctx->lock or
ctx->mutex, however due to how things are constructed disabling IRQs
is a valid and sufficient substitute for ctx->lock.
Another possible site to add assertions would be the various
pmu::{add,del,read,..}() methods, but that's not trivially expressable
in C -- the best option is wrappers, but those are easy enough to
forget.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Ensure all platform specific event flags are within PERF_EVENT_FLAG_ARCH.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lkml.kernel.org/r/20220907091924.439193-5-anshuman.khandual@arm.com
Ensure all platform specific event flags are within PERF_EVENT_FLAG_ARCH.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lkml.kernel.org/r/20220907091924.439193-4-anshuman.khandual@arm.com
This just ensures that PERF_EVENT_FLAG_ARCH does not overlap with generic
hardware event flags.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lkml.kernel.org/r/20220907091924.439193-3-anshuman.khandual@arm.com
Two hardware event flags on x86 platform has overshot PERF_EVENT_FLAG_ARCH
(0x0000ffff). These flags are PERF_X86_EVENT_PEBS_LAT_HYBRID (0x20000) and
PERF_X86_EVENT_AMD_BRS (0x10000). Lets expand PERF_EVENT_FLAG_ARCH mask to
accommodate those flags, and also create room for two more in the future.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lkml.kernel.org/r/20220907091924.439193-2-anshuman.khandual@arm.com
Besides the branch type filtering requests, 'event.attr.branch_sample_type'
also contains various flags indicating which additional information should
be captured, along with the base branch record. These flags help configure
the underlying hardware, and capture the branch records appropriately when
required e.g after PMU interrupt. But first, this moves an existing helper
perf_sample_save_hw_index() into the header before adding some more helpers
for other branch sample filter flags.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220906084414.396220-1-anshuman.khandual@arm.com
Rewrite the core freezer to behave better wrt thawing and be simpler
in general.
By replacing PF_FROZEN with TASK_FROZEN, a special block state, it is
ensured frozen tasks stay frozen until thawed and don't randomly wake
up early, as is currently possible.
As such, it does away with PF_FROZEN and PF_FREEZER_SKIP, freeing up
two PF_flags (yay!).
Specifically; the current scheme works a little like:
freezer_do_not_count();
schedule();
freezer_count();
And either the task is blocked, or it lands in try_to_freezer()
through freezer_count(). Now, when it is blocked, the freezer
considers it frozen and continues.
However, on thawing, once pm_freezing is cleared, freezer_count()
stops working, and any random/spurious wakeup will let a task run
before its time.
That is, thawing tries to thaw things in explicit order; kernel
threads and workqueues before doing bringing SMP back before userspace
etc.. However due to the above mentioned races it is entirely possible
for userspace tasks to thaw (by accident) before SMP is back.
This can be a fatal problem in asymmetric ISA architectures (eg ARMv9)
where the userspace task requires a special CPU to run.
As said; replace this with a special task state TASK_FROZEN and add
the following state transitions:
TASK_FREEZABLE -> TASK_FROZEN
__TASK_STOPPED -> TASK_FROZEN
__TASK_TRACED -> TASK_FROZEN
The new TASK_FREEZABLE can be set on any state part of TASK_NORMAL
(IOW. TASK_INTERRUPTIBLE and TASK_UNINTERRUPTIBLE) -- any such state
is already required to deal with spurious wakeups and the freezer
causes one such when thawing the task (since the original state is
lost).
The special __TASK_{STOPPED,TRACED} states *can* be restored since
their canonical state is in ->jobctl.
With this, frozen tasks need an explicit TASK_FROZEN wakeup and are
free of undue (early / spurious) wakeups.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114649.055452969@infradead.org
In preparation of adding more states, add a few 0s to the literals as
we've just about ran out.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Now that wait_task_inactive()'s @match_state argument is a mask (like
ttwu()) it is possible to replace the special !match_state case with
an 'all-states' value such that any blocked state will match.
Suggested-by: Ingo Molnar (mingo@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/YxhkzfuFTvRnpUaH@hirez.programming.kicks-ass.net
Make wait_task_inactive()'s @match_state work like ttwu()'s @state.
That is, instead of an equal comparison, use it as a mask. This allows
matching multiple block conditions.
(removes the unlikely; it doesn't make sense how it's only part of the
condition)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220822114648.856734578@infradead.org
handle_initrd() marks itself as PF_FREEZER_SKIP in order to ensure
that the UMH, which is going to freeze the system, doesn't
indefinitely wait for it's caller.
Rework things by adding UMH_FREEZABLE to indicate the completion is
freezable.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114648.791019324@infradead.org
Rafael explained that the reason for having both PF_NOFREEZE and
PF_FREEZER_SKIP is that {,un}lock_system_sleep() is callable from
kthread context that has previously called set_freezable().
In preparation of merging the flags, have {,un}lock_system_slee() save
and restore current->flags.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114648.725003428@infradead.org