The extra setup with GFP_DMA32 is superfluous for this driver. The
whole operation is a simple copy loop, and there is no memory address
restriction at all. Drop the useless GFP setup.
Link: https://lore.kernel.org/r/20220823115740.14123-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The extra setup with GFP_DMA32 is superfluous for this driver. The
whole operation is a simple copy loop, and there is no memory address
restriction at all. Drop the useless GFP setup.
Link: https://lore.kernel.org/r/20220823115740.14123-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The struct nhlt_format's fmt_config is a flexible array, it must not be
used as normal array.
When moving to the next nhlt_fmt_cfg we need to take into account the data
behind the ->config.caps (indicated by ->config.size).
Fixes: a864e8f159 ("ALSA: hda: intel-nhlt: verify config type")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Link: https://lore.kernel.org/r/20220823122405.18464-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It's been reported that there is a possible data-race accessing to the
global card_requested[] array at ALSA sequencer core, which is used
for determining whether to call request_module() for the card or not.
This data race itself is almost harmless, as it might end up with one
extra request_module() call for the already loaded module at most.
But it's still better to fix.
This patch addresses the possible data race of card_requested[] and
client_requested[] arrays by replacing them with bitmask.
It's an atomic operation and can work without locks.
Reported-by: Abhishek Shah <abhishek.shah@columbia.edu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAEHB24_ay6YzARpA1zgCsE7=H9CSJJzux618E=Ka4h0YdKn=qA@mail.gmail.com
Link: https://lore.kernel.org/r/20220823072717.1706-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The MR raw restrack attributes come from the queue context maintained by
the ROCEE.
For example:
$ rdma res show mr dev hns_0 mrn 6 -dd -jp -r
[ {
"ifindex": 4,
"ifname": "hns_0",
"data": [ 1,0,0,0,2,0,0,0,0,3,0,0,0,0,2,0,0,0,0,0,32,0,0,0,2,0,0,0,
2,0,0,0,0,0,0,0 ]
} ]
Link: https://lore.kernel.org/r/20220822104455.2311053-8-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
To clear the flow table on flow table free, the following sequence
normally happens in order:
1) gc_step work is stopped to disable any further stats/del requests.
2) All flow table entries are set to teardown state.
3) Run gc_step which will queue HW del work for each flow table entry.
4) Waiting for the above del work to finish (flush).
5) Run gc_step again, deleting all entries from the flow table.
6) Flow table is freed.
But if a flow table entry already has pending HW stats or HW add work
step 3 will not queue HW del work (it will be skipped), step 4 will wait
for the pending add/stats to finish, and step 5 will queue HW del work
which might execute after freeing of the flow table.
To fix the above, this patch flushes the pending work, then it sets the
teardown flag to all flows in the flowtable and it forces a garbage
collector run to queue work to remove the flows from hardware, then it
flushes this new pending work and (finally) it forces another garbage
collector run to remove the entry from the software flowtable.
Stack trace:
[47773.882335] BUG: KASAN: use-after-free in down_read+0x99/0x460
[47773.883634] Write of size 8 at addr ffff888103b45aa8 by task kworker/u20:6/543704
[47773.885634] CPU: 3 PID: 543704 Comm: kworker/u20:6 Not tainted 5.12.0-rc7+ #2
[47773.886745] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
[47773.888438] Workqueue: nf_ft_offload_del flow_offload_work_handler [nf_flow_table]
[47773.889727] Call Trace:
[47773.890214] dump_stack+0xbb/0x107
[47773.890818] print_address_description.constprop.0+0x18/0x140
[47773.892990] kasan_report.cold+0x7c/0xd8
[47773.894459] kasan_check_range+0x145/0x1a0
[47773.895174] down_read+0x99/0x460
[47773.899706] nf_flow_offload_tuple+0x24f/0x3c0 [nf_flow_table]
[47773.907137] flow_offload_work_handler+0x72d/0xbe0 [nf_flow_table]
[47773.913372] process_one_work+0x8ac/0x14e0
[47773.921325]
[47773.921325] Allocated by task 592159:
[47773.922031] kasan_save_stack+0x1b/0x40
[47773.922730] __kasan_kmalloc+0x7a/0x90
[47773.923411] tcf_ct_flow_table_get+0x3cb/0x1230 [act_ct]
[47773.924363] tcf_ct_init+0x71c/0x1156 [act_ct]
[47773.925207] tcf_action_init_1+0x45b/0x700
[47773.925987] tcf_action_init+0x453/0x6b0
[47773.926692] tcf_exts_validate+0x3d0/0x600
[47773.927419] fl_change+0x757/0x4a51 [cls_flower]
[47773.928227] tc_new_tfilter+0x89a/0x2070
[47773.936652]
[47773.936652] Freed by task 543704:
[47773.937303] kasan_save_stack+0x1b/0x40
[47773.938039] kasan_set_track+0x1c/0x30
[47773.938731] kasan_set_free_info+0x20/0x30
[47773.939467] __kasan_slab_free+0xe7/0x120
[47773.940194] slab_free_freelist_hook+0x86/0x190
[47773.941038] kfree+0xce/0x3a0
[47773.941644] tcf_ct_flow_table_cleanup_work
Original patch description and stack trace by Paul Blakey.
Fixes: c29f74e0df ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Paul Blakey <paulb@nvidia.com>
Tested-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Only allow to use this expression from NFPROTO_NETDEV family.
Fixes: af308b94a2 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
As it was originally intended, restrict extension to supported families.
Fixes: b96af92d6e ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Error might occur later in the nf_tables_addchain() codepath, enable
static key only after transaction has been created.
Fixes: 9f08ea8481 ("netfilter: nf_tables: keep chain counters away from hot path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Instead report ERANGE if csum_offset is too long, and EOPNOTSUPP if type
is not support.
Fixes: 7ec3f7b47b ("netfilter: nft_payload: add packet mangling support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Instead of offset and length are truncation to u8, report ERANGE.
Fixes: 96518518cc ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In modern Chromebooks, the embedded controller has a mechanism where
it will watch a hardware-controlled line that toggles in suspend, and
wake the system up if an expected sleep transition didn't occur. This
can be very useful for detecting power management issues where the
system appears to suspend, but doesn't actually reach its lowest
expected power states.
Sometimes it's useful in debug and test scenarios to be able to control
the duration of that timeout, or even disable the EC timeout mechanism
altogether. Add a debugfs control to set the timeout to values other
than the EC-defined default, for more convenient debug and
development iteration.
Signed-off-by: Evan Green <evgreen@chromium.org>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220822144026.v3.1.Idd188ff3f9caddebc17ac357a13005f93333c21f@changeid
[tzungbi: fix one nit in Documentation/ABI/testing/debugfs-cros-ec.]
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Contains fixes for the following issues:
* psi data structure was changed to be allocated dynamically but it wasn't
being cleared leading to reporting garbage values and triggering spurious
oom kills.
* A deadlock involving cpuset and cpu hotplug.
* When a controller is moved across cgroup hierarchies, css->rstat_css_node
didn't get RCU drained properly from the previous list.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCYwVmRg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGb/eAP44dr9/OQtapKm63H/qmLF39LWE6nC99RYHECl5
ncuZvwD/XIkZt212nr/qC1C0ggB5qCGG7tIZG6tIgkS+J5huqg4=
=CC/Y
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- The psi data structure was changed to be allocated dynamically but
it wasn't being cleared leading to it reporting garbage values and
triggering spurious oom kills.
- A deadlock involving cpuset and cpu hotplug.
- When a controller is moved across cgroup hierarchies,
css->rstat_css_node didn't get RCU drained properly from the previous
list.
* tag 'cgroup-for-6.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Fix race condition at rebind_subsystems()
cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock
sched/psi: Remove redundant cgroup_psi() when !CONFIG_CGROUPS
sched/psi: Remove unused parameter nbytes of psi_trigger_create()
sched/psi: Zero the memory of struct psi_group
-----BEGIN PGP SIGNATURE-----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=j0DY
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20220823' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single fix for a potential double-free on a fsnotify error path"
* tag 'audit-pr-20220823' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix potential double free on error path from fsnotify_add_inode_mark
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYwSG9QAKCRCRxhvAZXjc
or0AAP0ddEPI06qpWdQEvrv2wBJtpZ/3DG3mmAAlYVhVWXwKdwEA8AoYyRkcVaba
Um476CdoNti4BwIUA5j7PZw625ax+AM=
=FAYy
-----END PGP SIGNATURE-----
Merge tag 'fs.fixes.v6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping
Pull file_remove_privs() fix from Christian Brauner:
"As part of Stefan's and Jens' work to add async buffered write
support to xfs we refactored file_remove_privs() and added
__file_remove_privs() to avoid calling __remove_privs() when
IOCB_NOWAIT is passed.
While debugging a recent performance regression report I found that
during review we missed that commit faf99b5635 ("fs: add
__remove_file_privs() with flags parameter") accidently changed
behavior when dentry_needs_remove_privs() returns zero.
Before the commit it would still call inode_has_no_xattr() setting
the S_NOSEC bit and thereby avoiding even calling into
dentry_needs_remove_privs() the next time this function is called.
After that commit inode_has_no_xattr() would only be called if
__remove_privs() had to be called.
Restore the old behavior. This is likely the cause of the performance
regression"
* tag 'fs.fixes.v6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
fs: __file_remove_privs(): restore call to inode_has_no_xattr()
Commit 20f85ef89d ("drm/i915/backlight: use unique backlight device
names") added support for multiple backlight devices on dual panel
systems, but did so with error handling on -EEXIST from
backlight_device_register(). Unfortunately, that triggered a warning in
dmesg all the way down from sysfs_add_file_mode_ns() and
sysfs_warn_dup().
Instead of optimistically always attempting to register with the default
name ("intel_backlight", which we have to retain for backward
compatibility), check if a backlight device with the name exists first,
and, if so, use the card and connector based name.
v2: reworked on top of the patch commit 20f85ef89d
("drm/i915/backlight: use unique backlight device names")
v3: fixed the ref count leak(Jani N)
Fixes: 20f85ef89d ("drm/i915/backlight: use unique backlight device names")
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220808035750.3111046-1-arun.r.murthy@intel.com
(cherry picked from commit 4234ea3005)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If the GuC CTs are full and we need to stall the request submission
while waiting for space, we save the stalled request and where the stall
occurred; when the CTs have space again we pick up the request submission
from where we left off.
If a full GT reset occurs, the state of all contexts is cleared and all
non-guilty requests are unsubmitted, therefore we need to restart the
stalled request submission from scratch. To make sure that we do so,
clear the saved request after a reset.
Fixes note: the patch that introduced the bug is in 5.15, but no
officially supported platform had GuC submission enabled by default
in that kernel, so the backport to that particular version (and only
that one) can potentially be skipped.
Fixes: 925dc1cf58 ("drm/i915/guc: Implement GuC submission tasklet")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: <stable@vger.kernel.org> # v5.15+
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220811210812.3239621-1-daniele.ceraolospurio@intel.com
(cherry picked from commit f922fbb0f2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Crucible + recent Mesa seems to sometimes hit:
GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER)
And it looks like we can also trigger this with gem_lmem_swapping, if we
modify the test to use slightly larger object sizes.
Looking closer it looks like we have the following issues in
migrate_copy():
- We are using plain integer in various places, which we can easily
overflow with a large object.
- We pass the entire object size (when the src is lmem) into
emit_pte() and then try to copy it, which doesn't work, since we
only have a few fixed sized windows in which to map the pages and
perform the copy. With an object > 8M we therefore aren't properly
copying the pages. And then with an object > 64M we trigger the
GEM_BUG_ON(num_ccs_blks > NUM_CCS_BLKS_PER_XFER).
So it looks like our copy handling for any object > 8M (which is our
CHUNK_SZ) is currently broken on DG2.
Fixes: da0595ae91 ("drm/i915/migrate: Evict and restore the flatccs capable lmem obj")
Testcase: igt@gem_lmem_swapping
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C<ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220805132240.442747-2-matthew.auld@intel.com
(cherry picked from commit 8676145eb2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmMD35cACgkQSD+KveBX
+j5HZAf/fUg1QXlnIscB2/YaKUYyiagFNCotQz/8TIIkdwddTde4RkXQ192xYzKp
EeL1dV1ZNthgeq20OX5mXzquW/w1fa7zTK6eweby1Pq2VdyVuqKKuUbJXXO5Ci1m
rg3xxUeL8L+Rk9mGJo4HZynddH7tbHbuBq4dVgZAvDqq9jJOo6pHQPjQT1aUuc/N
KT/Ezd9fWaLlTs0VuONMjlj2OjukfXUMjgCkoq6BZxlVLTGMfRlWVdEFfCoxTtkk
eUvgiy2P9ApCBR8OtrjPfQ/L0bABiZvvDS4mMez9u6zutxBCKCtq4047I3dLfFyS
Er61j/QCPfbkmOWB/5+6Bysa47MI/Q==
=Z4kM
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2022-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-08-22
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: Unlock on error in mlx5_sriov_enable()
net/mlx5e: Fix use after free in mlx5e_fs_init()
net/mlx5e: kTLS, Use _safe() iterator in mlx5e_tls_priv_tx_list_cleanup()
net/mlx5: unlock on error path in esw_vfs_changed_event_handler()
net/mlx5e: Fix wrong tc flag used when set hw-tc-offload off
net/mlx5e: TC, Add missing policer validation
net/mlx5e: Fix wrong application of the LRO state
net/mlx5: Avoid false positive lockdep warning by adding lock_class_key
net/mlx5: Fix cmd error logging for manage pages cmd
net/mlx5: Disable irq when locking lag_lock
net/mlx5: Eswitch, Fix forwarding decision to uplink
net/mlx5: LAG, fix logic over MLX5_LAG_FLAG_NDEVS_READY
net/mlx5e: Properly disable vlan strip on non-UL reps
====================
Link: https://lore.kernel.org/r/20220822195917.216025-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: xsk: reduced queue count fixes
Maciej Fijalkowski says:
this small series is supposed to fix the issues around AF_XDP usage with
reduced queue count on interface. Due to the XDP rings setup, some
configurations can result in sockets not seeing traffic flowing. More
about this in description of patch 2.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: xsk: use Rx ring's XDP ring when picking NAPI context
ice: xsk: prohibit usage of non-balanced queue id
====================
Link: https://lore.kernel.org/r/20220822163257.2382487-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Wei Fang says:
====================
add interface mode select and RMII
From: Wei Fang <wei.fang@nxp.com>
The patches add the below feature support for both TJA1100 and
TJA1101 PHYs cards:
- Add MII and RMII mode support.
- Add REF_CLK input/output support for RMII mode.
====================
Link: https://lore.kernel.org/r/20220822015949.1569969-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add below features support for both TJA1100 and TJA1101 cards:
- Add MII and RMII mode support.
- Add REF_CLK input/output support for RMII mode.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TJA110x REF_CLK can be configured as interface reference clock
intput or output when the RMII mode enabled. This patch add the
property to make the REF_CLK can be configurable.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata says:
====================
mlxsw: Introduce modular system support by minimal driver
Vadim Pasternak writes:
This patchset adds line cards support in mlxsw_minimal, which is used
for monitoring purposes on BMC systems. The BMC is connected to the
ASIC over I2C bus, unlike the host CPU that is connected to the ASIC
via PCI bus.
The BMC system needs to be notified whenever line cards become active
or inactive, so that, for example, netdevs will be registered /
unregistered by mlxsw_minimal. However, traps cannot be generated
towards the BMC over the I2C bus. To overcome that, the I2C bus driver
(i.e., mlxsw_i2c) registers an handler for an IRQ that is fired upon
specific system wide changes, like line card activation and
deactivation.
The generated event is handled by mlxsw_core, which checks whether
anything changed in the state of available line cards. If a line card
becomes active or inactive, interested parties such as mlxsw_minimal
are notified via their registered line card event callback.
Patch set overview:
Patches #1 is preparations.
Patches #2-#3 extend mlxsw_core with an infrastructure to handle the
previously mentioned system events.
Patch #4 extends the I2C bus driver to register an handler for the IRQ
fired upon specific system wide changes.
Patches #5-#8 gradually add line cards support in mlxsw_minimal by
dynamically registering / unregistering netdevs for ports found on
line cards, whenever a line card becomes active / inactive.
====================
Link: https://lore.kernel.org/r/cover.1661093502.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement line card operation callbacks got_active() / got_inactive().
The purpose of these callback to create / remove line card ports after
line card is getting active / inactive.
Implement line ports_remove_selected() callback to support line card
un-provisioning flow through 'devlink'.
Add line card operation registration and de-registration APIs.
Add module offset for line card. Offset for main board iz zero.
For line card in slot #n offset is calculated as (#n - 1) multiplied by
maximum modules number.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The interfaces for ports found on line card are created and removed
dynamically after line card is getting active or inactive.
Introduce per line card array with module to port mapping.
For each port get 'slot_index' through PMLP register and set port
mapping for the relevant [slot_index][module] entry.
Split module and port allocation into separate routines.
Split per line card port creation and removing into separate routines.
Motivation to re-use these routines for line card operations.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Perform ports allocation in a separate routine.
Motivation is to re-use this routine for ports found on line cards.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add 'slot_index' field to port structure.
Replace zero slot_index argument with 'slot_index' in 'ethtool'
related APIs.
Add 'slot_index' argument to port initialization and
de-initialization related APIs.
Motivation is to prepare minimal driver for modular system support.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend i2c bus driver with interrupt handler to support system specific
hotplug events, related to line card state change.
Provide system IRQ line for interrupt handler. IRQ line Id could be
provided through the platform data if available, or could be set to the
default value.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add line card system event handler. Register it with core. It is
triggered by system interrupts raised from chassis programmable logic
devices to CPU. The purpose is to handle line card state changes over
I2C bus.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The purpose of system event handler is to handle system interrupts.
Such interrupts are raised to CPU from system programmable logic
devices, upon specific system wide changes, like line card activation
and deactivation.
The purpose is to create an alternative to trap mechanism, which
delivers these events to driver over PCI bus, but not available for
the driver working over I2C bus.
Mechanism is system dependent and applicable only for the systems
equipped with programmable devices with custom logic.
Add APIs for event handler registration and un-registration and API
which should be invoked from the registered callbacks when system
interrupt is raised to CPU.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, each line card is initialized using the following steps:
1. Initializing its various fields (e.g., slot index).
2. Creating the corresponding devlink object.
3. Enabling events (i.e., traps) for changes in line card status.
4. Querying and processing line card status.
Unlike traps, the IRQ that notifies the CPU about line card status
changes cannot be enabled / disabled on a per line card basis.
If a handler is registered before the line cards are initialized, the
handler risks accessing uninitialized memory.
On the other hand, if the handler is registered after initialization,
we risk missing events. For example, in step 4, the driver might see
that a line card is in ready state and will tell the device to enable
it. When enablement is done, the line card will be activated and the
IRQ will be triggered. Since a handler was not registered, the event
will be missed.
Solve this by splitting the initialization sequence into two steps
(1-2 and 3-4). In a subsequent patch, the handler will be registered
between both steps.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
They would require func_info which needs prog BTF anyway. Loading BTF
and setting the prog btf_fd while loading the prog indirectly requires
CAP_BPF, so just to reduce confusion, move both these helpers taking
callback under bpf_capable() protection as well, since they cannot be
used without CAP_BPF.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220823013117.24916-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Provide a bit of a brain dump of netlink related information
as documentation. Hopefully this will be useful to people
trying to navigate implementing YAML based parsing in languages
we won't be able to help with.
I started writing this doc while trying to figure out what
it'd take to widen the applicability of YAML to good old rtnl,
but the doc grew beyond that as it usually happens.
In all honesty a lot of this information is new to me as I usually
follow the "copy an existing example, drink to forget" process
of writing netlink user space, so reviews will be much appreciated.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20220819200221.422801-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Subsequent patch will render the kdoc from
include/uapi/linux/netlink.h into Documentation.
We need to fix the warnings. While at it move
the comments on struct nlmsghdr to a proper
kdoc comment.
Link: https://lore.kernel.org/r/20220819200221.422801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stanislav Fomichev says:
====================
Apparently, only a small subset of cgroup hooks actually falls
back to cgroup_base_func_proto. This leads to unexpected result
where not all cgroup helpers have bpf_{g,s}et_retval.
It's getting harder and harder to manage which helpers are exported
to which hooks. We now have the following call chains:
- cg_skb_func_proto
- sk_filter_func_proto
- bpf_sk_base_func_proto
- bpf_base_func_proto
So by looking at cg_skb_func_proto it's pretty hard to understand
what's going on.
For cgroup helpers, I'm proposing we do the following instead:
func_proto = cgroup_common_func_proto();
if (func_proto) return func_proto;
/* optional, if hook has 'current' */
func_proto = cgroup_current_func_proto();
if (func_proto) return func_proto;
...
switch (func_id) {
/* hook specific helpers */
case BPF_FUNC_hook_specific_helper:
return &xyz;
default:
/* always fall back to plain bpf_base_func_proto */
bpf_base_func_proto(func_id);
}
If this turns out more workable, we can follow up with converting
the rest to the same pattern.
v5:
- remove net/cls_cgroup.h include from patch 1/5 (Martin)
- move endif changes from patch 1/5 to 3/5 (Martin)
- don't define __weak protos, the ones in core.c suffice (Martin)
v4:
- don't touch existing helper.c helpers (Martin)
- drop unneeded CONFIG_CGROUP_BPF in bpf_lsm_func_proto (Martin)
v3:
- expose strtol/strtoul everywhere (Martin)
- move helpers declarations from bpf.h to bpf-cgroup.h (Martin)
- revise bpf_{g,s}et_retval documentation (Martin)
- don't expose bpf_{g,s}et_retval to cg_skb hooks (Martin)
v2:
- move everything into kernel/bpf/cgroup.c instead (Martin)
- use cgroup_common_func_proto in lsm (Martin)
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For each hook, have a simple bpf_set_retval(bpf_get_retval) program
and make sure it loads for the hooks we want. The exceptions are
the hooks which don't propagate the error to the callers:
- sockops
- recvmsg
- getpeername
- getsockname
- cg_skb ingress and egress
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220823222555.523590-6-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* replace 'syscall' with 'upper layers', still mention that it's being
exported via syscall errno
* describe what happens in set_retval(-EPERM) + return 1
* describe what happens with bind's 'return 3'
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220823222555.523590-5-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_strncmp is already exposed everywhere. The motivation is to keep
those helpers in kernel/bpf/helpers.c. Otherwise it's tempting to move
them under kernel/bpf/cgroup.c because they are currently only used
by sysctl prog types.
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220823222555.523590-4-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following hooks are per-cgroup hooks but they are not
using cgroup_{common,current}_func_proto, fix it:
* BPF_PROG_TYPE_CGROUP_SKB (cg_skb)
* BPF_PROG_TYPE_CGROUP_SOCK_ADDR (cg_sock_addr)
* BPF_PROG_TYPE_CGROUP_SOCK (cg_sock)
* BPF_PROG_TYPE_LSM+BPF_LSM_CGROUP
Also:
* move common func_proto's into cgroup func_proto handlers
* make sure bpf_{g,s}et_retval are not accessible from recvmsg,
getpeername and getsockname (return/errno is ignored in these
places)
* as a side effect, expose get_current_pid_tgid, get_current_comm_proto,
get_current_ancestor_cgroup_id, get_cgroup_classid to more cgroup
hooks
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20220823222555.523590-3-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Split cgroup_base_func_proto into the following:
* cgroup_common_func_proto - common helpers for all cgroup hooks
* cgroup_current_func_proto - common helpers for all cgroup hooks
running in the process context (== have meaningful 'current').
Move bpf_{g,s}et_retval and other cgroup-related helpers into
kernel/bpf/cgroup.c so they closer to where they are being used.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/r/20220823222555.523590-2-sdf@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>