Commit graph

1,188,286 commits

Author SHA1 Message Date
Pawan Gupta
7df548840c x86/bugs: Add "unknown" reporting for MMIO Stale Data
Older Intel CPUs that are not in the affected processor list for MMIO
Stale Data vulnerabilities currently report "Not affected" in sysfs,
which may not be correct. Vulnerability status for these older CPUs is
unknown.

Add known-not-affected CPUs to the whitelist. Report "unknown"
mitigation status for CPUs that are not in blacklist, whitelist and also
don't enumerate MSR ARCH_CAPABILITIES bits that reflect hardware
immunity to MMIO Stale Data vulnerabilities.

Mitigation is not deployed when the status is unknown.

  [ bp: Massage, fixup. ]

Fixes: 8d50cdf8b8 ("x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data")
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/a932c154772f2121794a5f2eded1a11013114711.1657846269.git.pawan.kumar.gupta@linux.intel.com
2022-08-18 15:35:22 +02:00
Pavel Begunkov
3f743e9bbb io_uring/net: use right helpers for async_data
There is another spot where we check ->async_data directly instead of
using req_has_async_data(), which is the way to do it, fix it up.

Fixes: 43e0bbbd0b ("io_uring: add netmsg cache")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/42f33b9a81dd6ae65dda92f0372b0ff82d548517.1660822636.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-08-18 07:27:20 -06:00
Matti Vaittinen
da279e6965
regulator: Add devm helpers for get and enable
A few regulator consumer drivers seem to be just getting a regulator,
enabling it and registering a devm-action to disable the regulator at
the driver detach and then forget about it.

We can simplify this a bit by adding a devm-helper for this pattern.
Add devm_regulator_get_enable() and devm_regulator_get_enable_optional()

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/ed7b8841193bb9749d426f3cb3b199c9460794cd.1660292316.git.mazziesaccount@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2022-08-18 12:51:48 +01:00
Borislav Petkov
0db7058e8e x86/clear_user: Make it faster
Based on a patch by Mark Hemment <markhemm@googlemail.com> and
incorporating very sane suggestions from Linus.

The point here is to have the default case with FSRM - which is supposed
to be the majority of x86 hw out there - if not now then soon - be
directly inlined into the instruction stream so that no function call
overhead is taking place.

Drop the early clobbers from the @size and @addr operands as those are
not needed anymore since we have single instruction alternatives.

The benchmarks I ran would show very small improvements and a PF
benchmark would even show weird things like slowdowns with higher core
counts.

So for a ~6m running the git test suite, the function gets called under
700K times, all from padzero():

  <...>-2536    [006] .....   261.208801: padzero: to: 0x55b0663ed214, size: 3564, cycles: 21900
  <...>-2536    [006] .....   261.208819: padzero: to: 0x7f061adca078, size: 3976, cycles: 17160
  <...>-2537    [008] .....   261.211027: padzero: to: 0x5572d019e240, size: 3520, cycles: 23850
  <...>-2537    [008] .....   261.211049: padzero: to: 0x7f1288dc9078, size: 3976, cycles: 15900
   ...

which is around 1%-ish of the total time and which is consistent with
the benchmark numbers.

So Mel gave me the idea to simply measure how fast the function becomes.
I.e.:

  start = rdtsc_ordered();
  ret = __clear_user(to, n);
  end = rdtsc_ordered();

Computing the mean average of all the samples collected during the test
suite run then shows some improvement:

  clear_user_original:
  Amean: 9219.71 (Sum: 6340154910, samples: 687674)

  fsrm:
  Amean: 8030.63 (Sum: 5522277720, samples: 687652)

That's on Zen3.

The situation looks a lot more confusing on Intel:

Icelake:

  clear_user_original:
  Amean: 19679.4 (Sum: 13652560764, samples: 693750)
  Amean: 19743.7 (Sum: 13693470604, samples: 693562)

(I ran it twice just to be sure.)

  ERMS:
  Amean: 20374.3 (Sum: 13910601024, samples: 682752)
  Amean: 20453.7 (Sum: 14186223606, samples: 693576)

  FSRM:
  Amean: 20458.2 (Sum: 13918381386, sample s: 680331)

The original microbenchmark which people were complaining about:

  for i in $(seq 1 10); do dd if=/dev/zero of=/dev/null bs=1M status=progress count=65536; done 2>&1 | grep copied
  32207011840 bytes (32 GB, 30 GiB) copied, 1 s, 32.2 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.93069 s, 35.6 GB/s
  37597741056 bytes (38 GB, 35 GiB) copied, 1 s, 37.6 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.78017 s, 38.6 GB/s
  62020124672 bytes (62 GB, 58 GiB) copied, 2 s, 31.0 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 2.13716 s, 32.2 GB/s
  60010004480 bytes (60 GB, 56 GiB) copied, 1 s, 60.0 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.14129 s, 60.2 GB/s
  53212086272 bytes (53 GB, 50 GiB) copied, 1 s, 53.2 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.28398 s, 53.5 GB/s
  55698259968 bytes (56 GB, 52 GiB) copied, 1 s, 55.7 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.22507 s, 56.1 GB/s
  55306092544 bytes (55 GB, 52 GiB) copied, 1 s, 55.3 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.23647 s, 55.6 GB/s
  54387539968 bytes (54 GB, 51 GiB) copied, 1 s, 54.4 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.25693 s, 54.7 GB/s
  50566529024 bytes (51 GB, 47 GiB) copied, 1 s, 50.6 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.35096 s, 50.9 GB/s
  58308165632 bytes (58 GB, 54 GiB) copied, 1 s, 58.3 GB/s
  68719476736 bytes (69 GB, 64 GiB) copied, 1.17394 s, 58.5 GB/s

Now the same thing with smaller buffers:

  for i in $(seq 1 10); do dd if=/dev/zero of=/dev/null bs=1M status=progress count=8192; done 2>&1 | grep copied
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.28485 s, 30.2 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.276112 s, 31.1 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.29136 s, 29.5 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.283803 s, 30.3 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.306503 s, 28.0 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.349169 s, 24.6 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.276912 s, 31.0 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.265356 s, 32.4 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.28464 s, 30.2 GB/s
  8589934592 bytes (8.6 GB, 8.0 GiB) copied, 0.242998 s, 35.3 GB/s

is also not conclusive because it all depends on the buffer sizes,
their alignments and when the microcode detects that cachelines can be
aggregated properly and copied in bigger sizes.

Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/CAHk-=wh=Mu_EYhtOmPn6AxoQZyEh-4fo2Zx3G7rBv1g7vwoKiw@mail.gmail.com
2022-08-18 12:36:42 +02:00
Jani Nikula
75217c2fcc drm/i915/dsi: use VBT backlight and CABC port definitions directly
Drop the intermediate values stored in intel_dsi and use the VBT values
directly, now that they're conveniently stored in panel->vbt.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8b3765f1e1dc4d436b312016f72647e03ba49f94.1660664162.git.jani.nikula@intel.com
2022-08-18 13:10:51 +03:00
Jani Nikula
ab55165d73 drm/i915/dsi: fix dual-link DSI backlight and CABC ports for display 11+
The VBT dual-link DSI backlight and CABC still use ports A and C, both
in Bspec and code, while display 11+ DSI only supports ports A and
B. Assume port C actually means port B for display 11+ when parsing VBT.

Bspec: 20154
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6476
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8c462718bcc7b36a83e09d0a5eef058b6bc8b1a2.1660664162.git.jani.nikula@intel.com
2022-08-18 13:10:45 +03:00
Jani Nikula
f4a6c7a454 drm/i915/dsi: filter invalid backlight and CABC ports
Avoid using ports that aren't initialized in case the VBT backlight or
CABC ports have invalid values. This fixes a NULL pointer dereference of
intel_dsi->dsi_hosts[port] in such cases.

Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b0f4f087866257d280eb97d6bcfcefd109cc5fa2.1660664162.git.jani.nikula@intel.com
2022-08-18 13:10:31 +03:00
Mika Westerberg
93a3c0d4e8 thunderbolt: Check router generation before connecting xHCI
Only Thunderbolt 3 routers need the xHCI connection flow. This also
ensures the router actually has both lane adapters (1 and 3). While
there move declaration of the boolean variables inside the block where
they are being used.

Fixes: 30a4eca69b ("thunderbolt: Add internal xHCI connect flows for Thunderbolt 3 devices")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-08-18 11:55:52 +03:00
Mika Westerberg
eb100b8fa8 thunderbolt: Use the actual buffer in tb_async_error()
The received notification packet is held in pkg->buffer and not in pkg
itself. Fix this by using the correct buffer.

Fixes: 81a54b5e19 ("thunderbolt: Let the connection manager handle all notifications")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2022-08-18 11:55:46 +03:00
Cezary Rojewski
f2bd1c5ae2 ALSA: hda: Fix page fault in snd_hda_codec_shutdown()
If early probe of HDAudio bus driver fails e.g.: due to missing
firmware file, snd_hda_codec_shutdown() ends in manipulating
uninitialized codec->pcm_list_head causing page fault.

Initialization of HDAudio codec in ASoC is split in two:
- snd_hda_codec_device_init()
- snd_hda_codec_device_new()

snd_hda_codec_device_init() is called during probe_codecs() by HDAudio
bus driver while snd_hda_codec_device_new() is called by
codec-component's ->probe(). The second call will not happen until all
components required by related sound card are present within the ASoC
framework. With firmware failing to load during the PCI's deferred
initialization i.e.: probe_work(), no platform components are ever
registered. HDAudio codec enumeration is done at that point though, so
the codec components became registered to ASoC framework, calling
snd_hda_codec_device_init() in the process.

Now, during platform reboot snd_hda_codec_shutdown() is called for every
codec found on the HDAudio bus causing oops if any of them has not
completed both of their initialization steps. Relocating field
initialization fixes the issue.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220816111727.3218543-7-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-08-18 09:47:19 +02:00
Cezary Rojewski
fb59878448 ALSA: hda: Remove codec init and exit routines
There are no users for snd_hdac_ext_bus_device_init() and
snd_hdac_ext_bus_device_exit().

While at it, remove hdac_to_hda_priv() too for the exact same reason.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220816111727.3218543-6-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-08-18 09:47:09 +02:00
Cezary Rojewski
0c5c29cafc ALSA: hda: Always free codec on the device release
With all HDAudio drivers aligned to make use of the same constructor,
have codec freed on the device release regardless of its type.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220816111727.3218543-5-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-08-18 09:46:58 +02:00
Cezary Rojewski
3fd63658ca ASoC: Intel: Drop hdac_ext usage for codec device creation
To make snd_hda_codec_device_init() the only constructor for struct
hda_codec instances remaining tasks are:

1) no struct may wrap struct hda_codec as its base type
2) bus drivers (skylake and sof) which are the current hdac_ext users
   need to be adjusted to make use of newly added codec init and exit
   routines instead
3) as bus drivers (skylake and sof) are to be responsible for creating
   codec device and assigning it to hdac_hda_priv->codec,
   hdac_hda_dev_probe() has to be freed of that job

To keep git bisect happy, all of these in made in one-go.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220816111727.3218543-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-08-18 09:46:43 +02:00
Cezary Rojewski
829c673198 ASoC: SOF: Intel: Introduce HDA codec init and exit routines
Preliminary step in making snd_hda_codec_device_init() the only
constructor for struct hda_codec instances. To do that, existing usage
of hdac_ext equivalents has to be dropped.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220816111727.3218543-3-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-08-18 09:46:30 +02:00
Cezary Rojewski
e4746d94d0 ASoC: Intel: Skylake: Introduce HDA codec init and exit routines
Preliminary step in making snd_hda_codec_device_init() the only
constructor for struct hda_codec instances. To do that, existing usage
of hdac_ext equivalents has to be dropped.

Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220816111727.3218543-2-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-08-18 09:46:18 +02:00
Takashi Iwai
5e92a64bd0 Merge branch 'for-linus' into for-next 2022-08-18 09:44:26 +02:00
Stefan Roesch
41191cf6bf
fs: __file_remove_privs(): restore call to inode_has_no_xattr()
This restores the call to inode_has_no_xattr() in the function
__file_remove_privs(). In case the dentry_meeds_remove_privs() returned
0, the function inode_has_no_xattr() was not called.

Signed-off-by: Stefan Roesch <shr@fb.com>
Fixes: faf99b5635 ("fs: add __remove_file_privs() with flags parameter")
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Link: https://lore.kernel.org/r/20220816153158.1925040-1-shr@fb.com
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-08-18 09:39:33 +02:00
Potin Lai
5ac309fec6 ARM: dts: aspeed: bletchley: Remove hdc1080 node
Because of incompatible 2nd source si7021, removing hdc1080 node from
device tree, and move node probe to user-space layer.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220810004338.329832-3-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-08-18 16:25:32 +10:00
Potin Lai
6da3f55fe8 ARM: dts: aspeed: bletchley: Add USB debug card IPMB node
Add an IPMB node for USB debug card (13-0010) to support IPMI
communication.

Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220810004338.329832-2-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-08-18 16:25:06 +10:00
Joel Stanley
9deb10cf16 ARM: dts: aspeed: ast2600-evb: Update I2C devices
The AST2600A3 EVB has the following I2C devices:

 - ADT7490 at 0x2e
 - EEPROM at 0xa0
 - LM75 at 0x9a

The bus these devices appear on can be configured by jumpers. The device
tree is configured with the buses given by the default jumper settings.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
Link: https://lore.kernel.org/r/20220623094717.3873328-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-08-18 16:24:04 +10:00
Florian Fainelli
a4be90ff7a memory: brcmstb_memc: Add Broadcom STB memory controller driver
Add support for configuring the Self Refresh Power Down (SRPD)
inactivity timeout on Broadcom STB chips. This is used to conserve power
when the DRAM activity is reduced.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220812222533.2428033-4-f.fainelli@gmail.com
2022-08-18 09:11:45 +03:00
Florian Fainelli
e3a1b9245e Documentation: sysfs: Document Broadcom STB memc sysfs knobs
Document the "srpd" and "frequency" sysfs attributes exposed by
the brcmstb_memc driver.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220812222533.2428033-3-f.fainelli@gmail.com
2022-08-18 09:11:45 +03:00
Florian Fainelli
fa0321ba51 dt-bindings: memory-controller: Document Broadcom STB MEMC
Document the Broadcom STB memory controller which is a trivial binding
for now with a set of compatible strings and single register.

Since we introduce this binding, the section in
Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt is removed
and this binding is referenced instead.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
[krzk: correct path in brcm,brcmstb.txt]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220812222533.2428033-2-f.fainelli@gmail.com
2022-08-18 09:11:45 +03:00
Lorenzo Bianconi
a617ccc016 net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_xdp_run
Fix possible NULL pointer dereference in mtk_xdp_run() if the
ebpf program returns XDP_TX and xdp_convert_buff_to_frame routine fails
returning NULL.

Fixes: 5886d26fd2 ("net: ethernet: mtk_eth_soc: add xmit XDP support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/627a07d759020356b64473e09f0855960e02db28.1660659112.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 21:59:14 -07:00
Leon Romanovsky
d515f38c1e net/mlx5e: Allocate flow steering storage during uplink initialization
IPsec code relies on valid priv->fs pointer that is the case in NIC
flow, but not correct in uplink. Before commit that mentioned in the
Fixes line, that pointer was valid in all flows as it was allocated
together with priv struct.

In addition, the cleanup representors routine called to that
not-initialized priv->fs pointer and its internals which caused NULL
deference.

So, move FS allocation to be as early as possible.

Fixes: af8bbf7300 ("net/mlx5e: Convert mlx5e_flow_steering member of mlx5e_priv to pointer")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/ae46fa5bed3c67f937bfdfc0370101278f5422f1.1660639564.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 21:59:03 -07:00
Jakub Kicinski
5b6a07297b Merge branch 'fixes-for-ocelot-driver-statistics'
Vladimir Oltean says:

====================
Fixes for Ocelot driver statistics

This series contains bug fixes for the ocelot drivers (both switchdev
and DSA). Some concern the counters exposed to ethtool -S, and others to
the counters exposed to ifconfig. I'm aware that the changes are fairly
large, but I wanted to prioritize on a proper approach to addressing the
issues rather than a quick hack.

Some of the noticed problems:
- bad register offsets for some counters
- unhandled concurrency leading to corrupted counters
- unhandled 32-bit wraparound of ifconfig counters

The issues on the ocelot switchdev driver were noticed through code
inspection, I do not have the hardware to test.

This patch set necessarily converts ocelot->stats_lock from a mutex to a
spinlock. I know this affects Colin Foster's development with the SPI
controlled VSC7512. I have other changes prepared for net-next that
convert this back into a mutex (along with other changes in this area).
====================

Link: https://lore.kernel.org/r/20220816135352.1431497-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 21:58:49 -07:00
Vladimir Oltean
e780e3193e net: mscc: ocelot: report ndo_get_stats64 from the wraparound-resistant ocelot->stats
Rather than reading the stats64 counters directly from the 32-bit
hardware, it's better to rely on the output produced by the periodic
ocelot_port_update_stats().

It would be even better to call ocelot_port_update_stats() right from
ocelot_get_stats64() to make sure we report the current values rather
than the ones from 2 seconds ago. But we need to export
ocelot_port_update_stats() from the switch lib towards the switchdev
driver for that, and future work will largely undo that.

There are more ocelot-based drivers waiting to be introduced, an example
of which is the SPI-controlled VSC7512. In that driver's case, it will
be impossible to call ocelot_port_update_stats() from ndo_get_stats64
context, since the latter is atomic, and reading the stats over SPI is
sleepable. So the compromise taken here, which will also hold going
forward, is to report 64-bit counters to stats64, which are not 100% up
to date.

Fixes: a556c76adc ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 21:58:33 -07:00
Vladimir Oltean
d4c3676507 net: mscc: ocelot: keep ocelot_stat_layout by reg address, not offset
With so many counter addresses recently discovered as being wrong, it is
desirable to at least have a central database of information, rather
than two: one through the SYS_COUNT_* registers (used for
ndo_get_stats64), and the other through the offset field of struct
ocelot_stat_layout elements (used for ethtool -S).

The strategy will be to keep the SYS_COUNT_* definitions as the single
source of truth, but for that we need to expand our current definitions
to cover all registers. Then we need to convert the ocelot region
creation logic, and stats worker, to the read semantics imposed by going
through SYS_COUNT_* absolute register addresses, rather than offsets
of 32-bit words relative to SYS_COUNT_RX_OCTETS (which should have been
SYS_CNT, by the way).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 21:58:32 -07:00
Vladimir Oltean
9190460084 net: mscc: ocelot: make struct ocelot_stat_layout array indexable
The ocelot counters are 32-bit and require periodic reading, every 2
seconds, by ocelot_port_update_stats(), so that wraparounds are
detected.

Currently, the counters reported by ocelot_get_stats64() come from the
32-bit hardware counters directly, rather than from the 64-bit
accumulated ocelot->stats, and this is a problem for their integrity.

The strategy is to make ocelot_get_stats64() able to cherry-pick
individual stats from ocelot->stats the way in which it currently reads
them out from SYS_COUNT_* registers. But currently it can't, because
ocelot->stats is an opaque u64 array that's used only to feed data into
ethtool -S.

To solve that problem, we need to make ocelot->stats indexable, and
associate each element with an element of struct ocelot_stat_layout used
by ethtool -S.

This makes ocelot_stat_layout a fat (and possibly sparse) array, so we
need to change the way in which we access it. We no longer need
OCELOT_STAT_END as a sentinel, because we know the array's size
(OCELOT_NUM_STATS). We just need to skip the array elements that were
left unpopulated for the switch revision (ocelot, felix, seville).

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 21:58:32 -07:00
Vladimir Oltean
18d8e67df1 net: mscc: ocelot: fix race between ndo_get_stats64 and ocelot_check_stats_work
The 2 methods can run concurrently, and one will change the window of
counters (SYS_STAT_CFG_STAT_VIEW) that the other sees. The fix is
similar to what commit 7fbf6795d1 ("net: mscc: ocelot: fix mutex lock
error during ethtool stats read") has done for ethtool -S.

Fixes: a556c76adc ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 21:58:32 -07:00
Vladimir Oltean
22d842e3ef net: mscc: ocelot: turn stats_lock into a spinlock
ocelot_get_stats64() currently runs unlocked and therefore may collide
with ocelot_port_update_stats() which indirectly accesses the same
counters. However, ocelot_get_stats64() runs in atomic context, and we
cannot simply take the sleepable ocelot->stats_lock mutex. We need to
convert it to an atomic spinlock first. Do that as a preparatory change.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 21:58:31 -07:00
Vladimir Oltean
173ca86618 net: mscc: ocelot: fix address of SYS_COUNT_TX_AGING counter
This register, used as part of stats->tx_dropped in
ocelot_get_stats64(), has a wrong address. At the address currently
given, there is actually the c_tx_green_prio_6 counter.

Fixes: a556c76adc ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 21:58:31 -07:00
Vladimir Oltean
5152de7b79 net: mscc: ocelot: fix incorrect ndo_get_stats64 packet counters
Reading stats using the SYS_COUNT_* register definitions is only used by
ocelot_get_stats64() from the ocelot switchdev driver, however,
currently the bucket definitions are incorrect.

Separately, on both RX and TX, we have the following problems:
- a 256-1023 bucket which actually tracks the 256-511 packets
- the 1024-1526 bucket actually tracks the 512-1023 packets
- the 1527-max bucket actually tracks the 1024-1526 packets

=> nobody tracks the packets from the real 1527-max bucket

Additionally, the RX_PAUSE, RX_CONTROL, RX_LONGS and RX_CLASSIFIED_DROPS
all track the wrong thing. However this doesn't seem to have any
consequence, since ocelot_get_stats64() doesn't use these.

Even though this problem only manifests itself for the switchdev driver,
we cannot split the fix for ocelot and for DSA, since it requires fixing
the bucket definitions from enum ocelot_reg, which makes us necessarily
adapt the structures from felix and seville as well.

Fixes: 84705fc165 ("net: dsa: felix: introduce support for Seville VSC9953 switch")
Fixes: 5605194877 ("net: dsa: ocelot: add driver for Felix switch family")
Fixes: a556c76adc ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 21:58:30 -07:00
Vladimir Oltean
40d21c4565 net: dsa: felix: fix ethtool 256-511 and 512-1023 TX packet counters
What the driver actually reports as 256-511 is in fact 512-1023, and the
TX packets in the 256-511 bucket are not reported. Fix that.

Fixes: 5605194877 ("net: dsa: ocelot: add driver for Felix switch family")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 21:58:30 -07:00
Vladimir Oltean
211987f3ac net: dsa: don't warn in dsa_port_set_state_now() when driver doesn't support it
ds->ops->port_stp_state_set() is, like most DSA methods, optional, and
if absent, the port is supposed to remain in the forwarding state (as
standalone). Such is the case with the mv88e6060 driver, which does not
offload the bridge layer. DSA warns that the STP state can't be changed
to FORWARDING as part of dsa_port_enable_rt(), when in fact it should not.

The error message is also not up to modern standards, so take the
opportunity to make it more descriptive.

Fixes: fd36454131 ("net: dsa: change scope of STP state setter")
Reported-by: Sergei Antonov <saproj@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Sergei Antonov <saproj@gmail.com>
Link: https://lore.kernel.org/r/20220816201445.1809483-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 21:58:22 -07:00
Rustam Subkhankulov
fd8e899cdb net: dsa: sja1105: fix buffer overflow in sja1105_setup_devlink_regions()
If an error occurs in dsa_devlink_region_create(), then 'priv->regions'
array will be accessed by negative index '-1'.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Fixes: bf425b8205 ("net: dsa: sja1105: expose static config as devlink region")
Link: https://lore.kernel.org/r/20220817003845.389644-1-subkhankulov@ispras.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 21:58:15 -07:00
Enzo Matsumiya
400d0ad63b cifs: remove useless parameter 'is_fsctl' from SMB2_ioctl()
SMB2_ioctl() is always called with is_fsctl = true, so doesn't make any
sense to have it at all.

Thus, always set SMB2_0_IOCTL_IS_FSCTL flag on the request.

Also, as per MS-SMB2 3.3.5.15 "Receiving an SMB2 IOCTL Request", servers
must fail the request if the request flags is zero anyway.

Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2022-08-17 23:30:49 -05:00
Uwe Kleine-König
f62e3f595c interconnect: imx: Make imx_icc_unregister() return void
The function imx_icc_unregister() returns zero unconditionally. Make it
return void.

This is a preparation for making platform remove callbacks return void.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
2022-08-18 07:20:41 +03:00
Wong Vee Khee
e34cfee65e stmmac: intel: remove unused 'has_crossts' flag
The 'has_crossts' flag was not used anywhere in the stmmac driver,
removing it from both header file and dwmac-intel driver.

Signed-off-by: Wong Vee Khee <veekhee@apple.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20220817064324.10025-1-veekhee@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 20:40:52 -07:00
Jakub Kicinski
3f5f728a72 Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Andrii Nakryiko says:

====================
bpf-next 2022-08-17

We've added 45 non-merge commits during the last 14 day(s) which contain
a total of 61 files changed, 986 insertions(+), 372 deletions(-).

The main changes are:

1) New bpf_ktime_get_tai_ns() BPF helper to access CLOCK_TAI, from Kurt
   Kanzenbach and Jesper Dangaard Brouer.

2) Few clean ups and improvements for libbpf 1.0, from Andrii Nakryiko.

3) Expose crash_kexec() as kfunc for BPF programs, from Artem Savkov.

4) Add ability to define sleepable-only kfuncs, from Benjamin Tissoires.

5) Teach libbpf's bpf_prog_load() and bpf_map_create() to gracefully handle
   unsupported names on old kernels, from Hangbin Liu.

6) Allow opting out from auto-attaching BPF programs by libbpf's BPF skeleton,
   from Hao Luo.

7) Relax libbpf's requirement for shared libs to be marked executable, from
   Henqgi Chen.

8) Improve bpf_iter internals handling of error returns, from Hao Luo.

9) Few accommodations in libbpf to support GCC-BPF quirks, from James Hilliard.

10) Fix BPF verifier logic around tracking dynptr ref_obj_id, from Joanne Koong.

11) bpftool improvements to handle full BPF program names better, from Manu
    Bretelle.

12) bpftool fixes around libcap use, from Quentin Monnet.

13) BPF map internals clean ups and improvements around memory allocations,
    from Yafang Shao.

14) Allow to use cgroup_get_from_file() on cgroupv1, allowing BPF cgroup
    iterator to work on cgroupv1, from Yosry Ahmed.

15) BPF verifier internal clean ups, from Dave Marchevsky and Joanne Koong.

16) Various fixes and clean ups for selftests/bpf and vmtest.sh, from Daniel
    Xu, Artem Savkov, Joanne Koong, Andrii Nakryiko, Shibin Koikkara Reeny.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
  selftests/bpf: Few fixes for selftests/bpf built in release mode
  libbpf: Clean up deprecated and legacy aliases
  libbpf: Streamline bpf_attr and perf_event_attr initialization
  libbpf: Fix potential NULL dereference when parsing ELF
  selftests/bpf: Tests libbpf autoattach APIs
  libbpf: Allows disabling auto attach
  selftests/bpf: Fix attach point for non-x86 arches in test_progs/lsm
  libbpf: Making bpf_prog_load() ignore name if kernel doesn't support
  selftests/bpf: Update CI kconfig
  selftests/bpf: Add connmark read test
  selftests/bpf: Add existing connection bpf_*_ct_lookup() test
  bpftool: Clear errno after libcap's checks
  bpf: Clear up confusion in bpf_skb_adjust_room()'s documentation
  bpftool: Fix a typo in a comment
  libbpf: Add names for auxiliary maps
  bpf: Use bpf_map_area_alloc consistently on bpf map creation
  bpf: Make __GFP_NOWARN consistent in bpf map creation
  bpf: Use bpf_map_area_free instread of kvfree
  bpf: Remove unneeded memset in queue_stack_map creation
  libbpf: preserve errno across pr_warn/pr_info/pr_debug
  ...
====================

Link: https://lore.kernel.org/r/20220817215656.1180215-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 20:29:36 -07:00
Jakub Kicinski
bec13ba9ce Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:

====================
netfilter: conntrack and nf_tables bug fixes

The following patchset contains netfilter fixes for net.

Broken since 5.19:
  A few ancient connection tracking helpers assume TCP packets cannot
  exceed 64kb in size, but this isn't the case anymore with 5.19 when
  BIG TCP got merged, from myself.

Regressions since 5.19:
  1. 'conntrack -E expect' won't display anything because nfnetlink failed
     to enable events for expectations, only for normal conntrack events.

  2. partially revert change that added resched calls to a function that can
     be in atomic context.  Both broken and fixed up by myself.

Broken for several releases (up to original merge of nf_tables):
  Several fixes for nf_tables control plane, from Pablo.
  This fixes up resource leaks in error paths and adds more sanity
  checks for mutually exclusive attributes/flags.

Kconfig:
  NF_CONNTRACK_PROCFS is very old and doesn't provide all info provided
  via ctnetlink, so it should not default to y. From Geert Uytterhoeven.

Selftests:
  rework nft_flowtable.sh: it frequently indicated failure; the way it
  tried to detect an offload failure did not work reliably.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  testing: selftests: nft_flowtable.sh: rework test to detect offload failure
  testing: selftests: nft_flowtable.sh: use random netns names
  netfilter: conntrack: NF_CONNTRACK_PROCFS should no longer default to y
  netfilter: nf_tables: check NFT_SET_CONCAT flag if field_count is specified
  netfilter: nf_tables: disallow NFT_SET_ELEM_CATCHALL and NFT_SET_ELEM_INTERVAL_END
  netfilter: nf_tables: NFTA_SET_ELEM_KEY_END requires concat and interval flags
  netfilter: nf_tables: validate NFTA_SET_ELEM_OBJREF based on NFT_SET_OBJECT flag
  netfilter: nf_tables: really skip inactive sets when allocating name
  netfilter: nfnetlink: re-enable conntrack expectation events
  netfilter: nf_tables: fix scheduling-while-atomic splat
  netfilter: nf_ct_irc: cap packet search space to 4k
  netfilter: nf_ct_ftp: prefer skb_linearize
  netfilter: nf_ct_h323: cap packet size at 64k
  netfilter: nf_ct_sane: remove pseudo skb linearization
  netfilter: nf_tables: possible module reference underflow in error path
  netfilter: nf_tables: disallow NFTA_SET_ELEM_KEY_END with NFT_SET_ELEM_INTERVAL_END flag
  netfilter: nf_tables: use READ_ONCE and WRITE_ONCE for shared generation id access
====================

Link: https://lore.kernel.org/r/20220817140015.25843-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 20:17:45 -07:00
David Howells
fc4aaf9fb3 net: Fix suspicious RCU usage in bpf_sk_reuseport_detach()
bpf_sk_reuseport_detach() calls __rcu_dereference_sk_user_data_with_flags()
to obtain the value of sk->sk_user_data, but that function is only usable
if the RCU read lock is held, and neither that function nor any of its
callers hold it.

Fix this by adding a new helper, __locked_read_sk_user_data_with_flags()
that checks to see if sk->sk_callback_lock() is held and use that here
instead.

Alternatively, making __rcu_dereference_sk_user_data_with_flags() use
rcu_dereference_checked() might suffice.

Without this, the following warning can be occasionally observed:

=============================
WARNING: suspicious RCU usage
6.0.0-rc1-build2+ #563 Not tainted
-----------------------------
include/net/sock.h:592 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
5 locks held by locktest/29873:
 #0: ffff88812734b550 (&sb->s_type->i_mutex_key#9){+.+.}-{3:3}, at: __sock_release+0x77/0x121
 #1: ffff88812f5621b0 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_close+0x1c/0x70
 #2: ffff88810312f5c8 (&h->lhash2[i].lock){+.+.}-{2:2}, at: inet_unhash+0x76/0x1c0
 #3: ffffffff83768bb8 (reuseport_lock){+...}-{2:2}, at: reuseport_detach_sock+0x18/0xdd
 #4: ffff88812f562438 (clock-AF_INET){++..}-{2:2}, at: bpf_sk_reuseport_detach+0x24/0xa4

stack backtrace:
CPU: 1 PID: 29873 Comm: locktest Not tainted 6.0.0-rc1-build2+ #563
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x4c/0x5f
 bpf_sk_reuseport_detach+0x6d/0xa4
 reuseport_detach_sock+0x75/0xdd
 inet_unhash+0xa5/0x1c0
 tcp_set_state+0x169/0x20f
 ? lockdep_sock_is_held+0x3a/0x3a
 ? __lock_release.isra.0+0x13e/0x220
 ? reacquire_held_locks+0x1bb/0x1bb
 ? hlock_class+0x31/0x96
 ? mark_lock+0x9e/0x1af
 __tcp_close+0x50/0x4b6
 tcp_close+0x28/0x70
 inet_release+0x8e/0xa7
 __sock_release+0x95/0x121
 sock_close+0x14/0x17
 __fput+0x20f/0x36a
 task_work_run+0xa3/0xcc
 exit_to_user_mode_prepare+0x9c/0x14d
 syscall_exit_to_user_mode+0x18/0x44
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: cf8c1e9672 ("net: refactor bpf_sk_reuseport_detach()")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Hawkins Jiawei <yin31149@gmail.com>
Link: https://lore.kernel.org/r/166064248071.3502205.10036394558814861778.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-17 16:42:59 -07:00
Enzo Matsumiya
68ed14496b cifs: remove unused server parameter from calc_smb_size()
This parameter is unused by the called function

Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
2022-08-17 18:07:13 -05:00
Dave Airlie
2ae6ab9d82 One patch for imx/dcss to get rid of a warning message, one off-by-one
fix and GA103 support for nouveau, a refcounting fix for meson, a NULL
 pointer dereference fix for ttm, a error check fix for lvds-codec, a
 dt-binding schema fix and an underflow fix for sun4i
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYvtmwAAKCRDj7w1vZxhR
 xY4HAPwKiJDHAVqNy6ehEvBFRqJgEB65ACQ6ekf7ze/zS3ldIgEAo5cKwsEeePaW
 wJH47kjcvrn1H/UfyB0992UGm1fqMgY=
 =E71X
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2022-08-16' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

One patch for imx/dcss to get rid of a warning message, one off-by-one
fix and GA103 support for nouveau, a refcounting fix for meson, a NULL
pointer dereference fix for ttm, a error check fix for lvds-codec, a
dt-binding schema fix and an underflow fix for sun4i

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816094401.wtadc7ddr6lzq6aj@houat
2022-08-18 08:51:42 +10:00
Dave Airlie
8ae4be56dd - disable pci resize on 32-bit systems (Nirmoy)
- don't leak the ccs state (Matt)
 - TLB invalidation fixes (Chris)
 [now with all fixes of fixes]
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmL1bnMACgkQ+mJfZA7r
 E8oQBAf+IHHvIp89jM/lwwnKZ4IwsD+kWGo4TnN57uHwzxMaIXKTlG9Em2HPhSgL
 PyvV86Q1SLv+fo59SCSOg2z0+m3gUZHdJ4IAjDkWUbluCoXvB+51NuYKtQjtZE7J
 zkR0dLzsT3Jo0gUc5IofkIA7m7U1y9TA3W+eWyJuBz4gIEXttu/YX/ZMJbATL7qT
 rDFFCEfTNDb/Zui8tNYwlPaVDWU/JxtU3LFpZgphcp42ancgXkf4J7mMA4Q3nXnz
 QBbMlk7urYz0LIj+ICrWutTa4SN7y3y7Z9pknivyxawTIzwk+RXTJ70+kDHe3dhK
 3x0x4bk2uFpEo8y0mMzz4Bhn9i1zXA==
 =8hPH
 -----END PGP SIGNATURE-----

Merge tag 'drm-intel-next-fixes-2022-08-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- disable pci resize on 32-bit systems (Nirmoy)
- don't leak the ccs state (Matt)
- TLB invalidation fixes (Chris)
[now with all fixes of fixes]

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YvVumNCga+90fYN0@intel.com
2022-08-18 08:45:49 +10:00
YiFei Zhu
14b20b784f bpf: Restrict bpf_sys_bpf to CAP_PERFMON
The verifier cannot perform sufficient validation of any pointers passed
into bpf_attr and treats them as integers rather than pointers. The helper
will then read from arbitrary pointers passed into it. Restrict the helper
to CAP_PERFMON since the security model in BPF of arbitrary kernel read is
CAP_BPF + CAP_PERFMON.

Fixes: af2ac3e13e ("bpf: Prepare bpf syscall to be used from kernel and user space.")
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220816205517.682470-1-zhuyifei@google.com
2022-08-18 00:27:49 +02:00
Linus Torvalds
3b06a27557 ntfs3 for 6.0
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEh0DEKNP0I9IjwfWEqbAzH4MkB7YFAmL7xrEACgkQqbAzH4Mk
 B7Y3iw/+KZLidS4J9Lq+BhoDj21brkrvE+iiBhLClN8LQNn7jwkF+mTpYcGxvm+3
 fgrT5YTUt6OBx9N06qjUnKKcwBrOq1xFo6hdlCVHQiZbEUgYsSglE6xVdyt5RICb
 AVD6T7uKnHq4cQHe8796h23/Vfd3z2rAetvz5w/6Gd+mOpguLj+sx7QGE7R6o3V/
 uvbxj8z7cFkrVy6b7H5gaDUFzAhVxBzZY+2P1CUOg4uUy0YI0PeUbJli8zt/qORP
 Mr5mTEeKc1sxWzuDASppjgCPjdQVN+jgy7hQEpC6SLDR5HgtjncCCRE+dA1ZcnQm
 PQCG1Xn8CSII8bDCu6Lvr6KtxhRBdG/wb99zpn50wBmb6CzMJGOGmBwrPMMhW8Zo
 8ZBYHCY5YgDuXNkFpQrivayrADGaLhmAl1BTjXTDCQU7MoxxFsPO8D/swufvNf3W
 5eC5ezQ8FY3sSHRuDvVGHe8djvgsGvfxQAMrbfMJqEBFuPg3EYjJOeRpZK6NUyk4
 U31Jtz0hYSuU0dnoEaZFQ23/K7/vl2kile6VlNPApFR+y8OtSARN++Za58xdtg2y
 H8XmEbuN/g8XxPXz55Smf4Y8RzaIZ2S56aA19nBqza5o1a6gQUr2SomTHGRLJsFQ
 5xLyuUBrZRDxS8jcxa5TTfj7CNFBJkaxtXU8M66vIzXhXcm5+9U=
 =iz2l
 -----END PGP SIGNATURE-----

Merge tag 'ntfs3_for_6.0' of https://github.com/Paragon-Software-Group/linux-ntfs3

Pull ntfs3 updates from Konstantin Komarov:

 - implement FALLOC_FL_INSERT_RANGE

 - fix some logic errors

 - fixed xfstests (tested on x86_64): generic/064 generic/213
   generic/300 generic/361 generic/449 generic/485

 - some dead code removed or refactored

* tag 'ntfs3_for_6.0' of https://github.com/Paragon-Software-Group/linux-ntfs3: (39 commits)
  fs/ntfs3: uninitialized variable in ntfs_set_acl_ex()
  fs/ntfs3: Remove unused function wnd_bits
  fs/ntfs3: Make ni_ins_new_attr return error
  fs/ntfs3: Create MFT zone only if length is large enough
  fs/ntfs3: Refactoring attr_insert_range to restore after errors
  fs/ntfs3: Refactoring attr_punch_hole to restore after errors
  fs/ntfs3: Refactoring attr_set_size to restore after errors
  fs/ntfs3: New function ntfs_bad_inode
  fs/ntfs3: Make MFT zone less fragmented
  fs/ntfs3: Check possible errors in run_pack in advance
  fs/ntfs3: Added comments to frecord functions
  fs/ntfs3: Fill duplicate info in ni_add_name
  fs/ntfs3: Make static function attr_load_runs
  fs/ntfs3: Add new argument is_mft to ntfs_mark_rec_free
  fs/ntfs3: Remove unused mi_mark_free
  fs/ntfs3: Fix very fragmented case in attr_punch_hole
  fs/ntfs3: Fix work with fragmented xattr
  fs/ntfs3: Make ntfs_fallocate return -ENOSPC instead of -EFBIG
  fs/ntfs3: extend ni_insert_nonresident to return inserted ATTR_LIST_ENTRY
  fs/ntfs3: Check reserved size for maximum allowed
  ...
2022-08-17 14:51:22 -07:00
Daniel Borkmann
3024d95a4c bpf: Partially revert flexible-array member replacement
Partially revert 94dfc73e7c ("treewide: uapi: Replace zero-length arrays
with flexible-array members") given it breaks BPF UAPI.

For example, BPF CI run reveals build breakage under LLVM:

  [...]
    CLNG-BPF [test_maps] map_ptr_kern.o
    CLNG-BPF [test_maps] btf__core_reloc_arrays___diff_arr_val_sz.o
    CLNG-BPF [test_maps] test_bpf_cookie.o
  progs/map_ptr_kern.c:314:26: error: field 'trie_key' with variable sized type 'struct bpf_lpm_trie_key' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end]
           struct bpf_lpm_trie_key trie_key;
                                   ^
    CLNG-BPF [test_maps] btf__core_reloc_type_based___diff.o
  1 error generated.
  make: *** [Makefile:521: /tmp/runner/work/bpf/bpf/tools/testing/selftests/bpf/map_ptr_kern.o] Error 1
  make: *** Waiting for unfinished jobs....
  [...]

Typical usage of the bpf_lpm_trie_key is that the struct gets embedded into
a user defined key for the LPM BPF map, from the selftest example:

  struct bpf_lpm_trie_key {                 <-- UAPI exported struct
         __u32   prefixlen;
         __u8    data[];
  };

  struct lpm_key {                          <-- BPF program defined struct
         struct bpf_lpm_trie_key trie_key;
         __u32 data;
  };

Undo this for BPF until a different solution can be found. It's the only flexible-
array member case in the UAPI header.

This was discovered in BPF CI after Dave reported that the include/uapi/linux/bpf.h
header was out of sync with tools/include/uapi/linux/bpf.h after 94dfc73e7c. And
the subsequent sync attempt failed CI.

Fixes: 94dfc73e7c ("treewide: uapi: Replace zero-length arrays with flexible-array members")
Reported-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/bpf/22aebc88-da67-f086-e620-dd4a16e2bc69@iogearbox.net
2022-08-17 23:45:47 +02:00
Linus Torvalds
ae2a823643 dcache: move the DCACHE_OP_COMPARE case out of the __d_lookup_rcu loop
__d_lookup_rcu() is one of the hottest functions in the kernel on
certain loads, and it is complicated by filesystems that might want to
have their own name compare function.

We can improve code generation by moving the test of DCACHE_OP_COMPARE
outside the loop, which makes the loop itself much simpler, at the cost
of some code duplication.  But both cases end up being simpler, and the
"native" direct case-sensitive compare particularly so.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-08-17 14:33:03 -07:00
Al Viro
47091e4ed9 dma_buf_getfile(): don't bother with ->f_flags reassignments
just pass the already sanitized value to alloc_file_pseudo().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2022-08-17 17:25:54 -04:00