Runtime PM APIs for at_xdmac just plays with clk_enable()/clk_disable()
letting aside the clk_prepare()/clk_unprepare() that needs to be
executed as the clock is also prepared on probe. Thus instead of using
runtime PM force suspend/resume APIs use
clk_disable_unprepare() + pm_runtime_put_noidle() on suspend and
clk_prepare_enable() + pm_runtime_get_noresume() on resume. This
approach as been chosen instead of using runtime PM force suspend/resume
with clk_unprepare()/clk_prepare() as it looks simpler and the final
code is better.
While at it added the missing pm_runtime_mark_last_busy() on suspend before
decrementing the reference counter.
Fixes: 650b0e990c ("dmaengine: at_xdmac: add runtime pm support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230214151827.1050280-2-claudiu.beznea@microchip.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The bit DMAC_CHEN[0] is automatically cleared by hardware to disable the
channel after the last AMBA transfer of the DMA transfer to the
destination has completed. Software can therefore poll this bit to
determine when this channel is free for a new DMA transfer.
This time requires at least 40 milliseconds on JH7110 SoC, otherwise an
error message 'failed to stop' will be reported.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Link: https://lore.kernel.org/r/20230322094820.24738-4-walker.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add DMA reset operation in device probe and use different configuration
on CH_CFG registers according to match data. Update all uses of
of_device_is_compatible with of_device_get_match_data.
Signed-off-by: Walker Chen <walker.chen@starfivetech.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20230322094820.24738-3-walker.chen@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
We had the open coded equivalent in perf_cpu_map__empty_new(), so reuse
what is in libperf.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/lkml/20230407230405.2931830-3-irogers@google.com
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can have a single point where to refcount check 'struct perf_cpu_map'
instances for use after free, etc.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Link: https://lore.kernel.org/lkml/20230407230405.2931830-3-irogers@google.com
[ Split from a larger patch ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the flask.h target depend on the genheaders binary instead of
classmap.h to ensure that it is rebuilt if any of the dependencies of
genheaders are changed.
Notably this fixes flask.h not being rebuilt when
initial_sid_to_string.h is modified.
Fixes: 8753f6bec3 ("selinux: generate flask headers during kernel build")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The issue_pending request is ignored while driver is processing a DMA
request. Fix to issue the pending requests on any dma channel status.
Fixes: e63d79d1ff ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-2-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The dw-edma driver stops after processing a DMA request even if a request
remains in the issued queue, which is not the expected behavior. The DMA
engine API requires continuous processing.
Add a trigger to start after one processing finished if there are requests
remain.
Fixes: e63d79d1ff ("dmaengine: Add Synopsys eDMA IP core driver")
Signed-off-by: Shunsuke Mie <mie@igel.co.jp>
Link: https://lore.kernel.org/r/20230411101758.438472-1-mie@igel.co.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
qcom_hidma uses of_dma_configure() which is declared in of_device.h.
platform_device.h and of_device.h get implicitly included by of_platform.h,
but that is going to be removed soon.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sinan Kaya <okaya@kernel.org>
Link: https://lore.kernel.org/r/20230410232654.1561462-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
After commit 6376ce56feb6 ("iov_iter: import single vector iovecs as
ITER_UBUF"), GCC does an inter-procedural compiler optimization which
moves the user_access_begin() out of copy_compat_iovec_from_user() and
into its callers:
lib/iov_iter.o: warning: objtool: .altinstr_replacement+0x0: redundant UACCESS disable
lib/iov_iter.o: warning: objtool: iovec_from_user.part.0+0xc7: call to copy_compat_iovec_from_user.part.0() with UACCESS enabled
lib/iov_iter.o: warning: objtool: __import_iovec+0x21d: call to copy_compat_iovec_from_user.part.0() with UACCESS enabled
Enforce the "no UACCESS enable across function boundaries" rule by
disabling cloning for copy_compat_iovec_from_user().
Fixes: 6376ce56feb6 ("iov_iter: import single vector iovecs as ITER_UBUF")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
https://lkml.kernel.org/lkml/20230327120017.6bb826d7@canb.auug.org.au
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
DPHY RX module has a common module reset (RSTB_CMN) which is expected
to be released during configuration. In J721E SR1.0 the RSTB_CMN is
internally tied to CSI_RX_RST and is hardware controlled, for all
other newer platforms the common module reset is software controlled.
Add support to control common module reset during configuration and
also skip common module reset based on soc_device_match() for J721E SR1.0.
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Co-developed-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20230314073137.2153-1-vaishnav.a@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Enable full rate divider configuration support for J721E_WIZ_16G for SGMII.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230309092434.443550-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add two functions `init_with` and `pin_init_with` to
`UniqueArc<MaybeUninit<T>>` to initialize the memory of already allocated
`UniqueArc`s. This is useful when you want to allocate memory check some
condition inside of a context where allocation is forbidden and then
conditionally initialize an object.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-16-y86-dev@protonmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`UniqueArc::try_new_uninit` calls `Arc::try_new(MaybeUninit::uninit())`.
This results in the uninitialized memory being placed on the stack,
which may be arbitrarily large due to the generic `T` and thus could
cause a stack overflow for large types.
Change the implementation to use the pin-init API which enables in-place
initialization. In particular it avoids having to first construct and
then move the uninitialized memory from the stack into the final location.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-15-y86-dev@protonmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This function allows to easily initialize `Opaque` with the pin-init
API. `Opaque::ffi_init` takes a closure and returns a pin-initializer.
This pin-initiailizer calls the given closure with a pointer to the
inner `T`.
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-14-y86-dev@protonmail.com
[ Fixed typo. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add `pin-init` API macros and traits to the prelude.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-13-y86-dev@protonmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the `Zeroable` trait which marks types that can be initialized by
writing `0x00` to every byte of the type. Also add the `init::zeroed`
function that creates an initializer for a `Zeroable` type that writes
`0x00` to every byte.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-12-y86-dev@protonmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `stack_pin_init!` macro allows pin-initializing a value on the
stack. It accepts a `impl PinInit<T, E>` to initialize a `T`. It allows
propagating any errors via `?` or handling it normally via `match`.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20230408122429.1103522-11-y86-dev@protonmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `PinnedDrop` trait that facilitates destruction of pinned types.
It has to be implemented via the `#[pinned_drop]` macro, since the
`drop` function should not be called by normal code, only by other
destructors. It also only works on structs that are annotated with
`#[pin_data(PinnedDrop)]`.
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-10-y86-dev@protonmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `InPlaceInit` trait that provides two functions, for initializing
using `PinInit<T, E>` and `Init<T>`. It is implemented by `Arc<T>`,
`UniqueArc<T>` and `Box<T>`.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-9-y86-dev@protonmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the following initializer macros:
- `#[pin_data]` to annotate structurally pinned fields of structs,
needed for `pin_init!` and `try_pin_init!` to select the correct
initializer of fields.
- `pin_init!` create a pin-initializer for a struct with the
`Infallible` error type.
- `try_pin_init!` create a pin-initializer for a struct with a custom
error type (`kernel::error::Error` is the default).
- `init!` create an in-place-initializer for a struct with the
`Infallible` error type.
- `try_init!` create an in-place-initializer for a struct with a custom
error type (`kernel::error::Error` is the default).
Also add their needed internal helper traits and structs.
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-8-y86-dev@protonmail.com
[ Fixed three typos. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This API is used to facilitate safe pinned initialization of structs. It
replaces cumbersome `unsafe` manual initialization with elegant safe macro
invocations.
Due to the size of this change it has been split into six commits:
1. This commit introducing the basic public interface: traits and
functions to represent and create initializers.
2. Adds the `#[pin_data]`, `pin_init!`, `try_pin_init!`, `init!` and
`try_init!` macros along with their internal types.
3. Adds the `InPlaceInit` trait that allows using an initializer to create
an object inside of a `Box<T>` and other smart pointers.
4. Adds the `PinnedDrop` trait and adds macro support for it in
the `#[pin_data]` macro.
5. Adds the `stack_pin_init!` macro allowing to pin-initialize a struct on
the stack.
6. Adds the `Zeroable` trait and `init::zeroed` function to initialize
types that have `0x00` in all bytes as a valid bit pattern.
--
In this section the problem that the new pin-init API solves is outlined.
This message describes the entirety of the API, not just the parts
introduced in this commit. For a more granular explanation and additional
information on pinning and this issue, view [1].
Pinning is Rust's way of enforcing the address stability of a value. When a
value gets pinned it will be impossible for safe code to move it to another
location. This is done by wrapping pointers to said object with `Pin<P>`.
This wrapper prevents safe code from creating mutable references to the
object, preventing mutable access, which is needed to move the value.
`Pin<P>` provides `unsafe` functions to circumvent this and allow
modifications regardless. It is then the programmer's responsibility to
uphold the pinning guarantee.
Many kernel data structures require a stable address, because there are
foreign pointers to them which would get invalidated by moving the
structure. Since these data structures are usually embedded in structs to
use them, this pinning property propagates to the container struct.
Resulting in most structs in both Rust and C code needing to be pinned.
So if we want to have a `mutex` field in a Rust struct, this struct also
needs to be pinned, because a `mutex` contains a `list_head`. Additionally
initializing a `list_head` requires already having the final memory
location available, because it is initialized by pointing it to itself. But
this presents another challenge in Rust: values have to be initialized at
all times. There is the `MaybeUninit<T>` wrapper type, which allows
handling uninitialized memory, but this requires using the `unsafe` raw
pointers and a casting the type to the initialized variant.
This problem gets exacerbated when considering encapsulation and the normal
safety requirements of Rust code. The fields of the Rust `Mutex<T>` should
not be accessible to normal driver code. After all if anyone can modify
the fields, there is no way to ensure the invariants of the `Mutex<T>` are
upheld. But if the fields are inaccessible, then initialization of a
`Mutex<T>` needs to be somehow achieved via a function or a macro. Because
the `Mutex<T>` must be pinned in memory, the function cannot return it by
value. It also cannot allocate a `Box` to put the `Mutex<T>` into, because
that is an unnecessary allocation and indirection which would hurt
performance.
The solution in the rust tree (e.g. this commit: [2]) that is replaced by
this API is to split this function into two parts:
1. A `new` function that returns a partially initialized `Mutex<T>`,
2. An `init` function that requires the `Mutex<T>` to be pinned and that
fully initializes the `Mutex<T>`.
Both of these functions have to be marked `unsafe`, since a call to `new`
needs to be accompanied with a call to `init`, otherwise using the
`Mutex<T>` could result in UB. And because calling `init` twice also is not
safe. While `Mutex<T>` initialization cannot fail, other structs might
also have to allocate memory, which would result in conditional successful
initialization requiring even more manual accommodation work.
Combine this with the problem of pin-projections -- the way of accessing
fields of a pinned struct -- which also have an `unsafe` API, pinned
initialization is riddled with `unsafe` resulting in very poor ergonomics.
Not only that, but also having to call two functions possibly multiple
lines apart makes it very easy to forget it outright or during refactoring.
Here is an example of the current way of initializing a struct with two
synchronization primitives (see [3] for the full example):
struct SharedState {
state_changed: CondVar,
inner: Mutex<SharedStateInner>,
}
impl SharedState {
fn try_new() -> Result<Arc<Self>> {
let mut state = Pin::from(UniqueArc::try_new(Self {
// SAFETY: `condvar_init!` is called below.
state_changed: unsafe { CondVar::new() },
// SAFETY: `mutex_init!` is called below.
inner: unsafe {
Mutex::new(SharedStateInner { token_count: 0 })
},
})?);
// SAFETY: `state_changed` is pinned when `state` is.
let pinned = unsafe {
state.as_mut().map_unchecked_mut(|s| &mut s.state_changed)
};
kernel::condvar_init!(pinned, "SharedState::state_changed");
// SAFETY: `inner` is pinned when `state` is.
let pinned = unsafe {
state.as_mut().map_unchecked_mut(|s| &mut s.inner)
};
kernel::mutex_init!(pinned, "SharedState::inner");
Ok(state.into())
}
}
The pin-init API of this patch solves this issue by providing a
comprehensive solution comprised of macros and traits. Here is the example
from above using the pin-init API:
#[pin_data]
struct SharedState {
#[pin]
state_changed: CondVar,
#[pin]
inner: Mutex<SharedStateInner>,
}
impl SharedState {
fn new() -> impl PinInit<Self> {
pin_init!(Self {
state_changed <- new_condvar!("SharedState::state_changed"),
inner <- new_mutex!(
SharedStateInner { token_count: 0 },
"SharedState::inner",
),
})
}
}
Notably the way the macro is used here requires no `unsafe` and thus comes
with the usual Rust promise of safe code not introducing any memory
violations. Additionally it is now up to the caller of `new()` to decide
the memory location of the `SharedState`. They can choose at the moment
`Arc<T>`, `Box<T>` or the stack.
--
The API has the following architecture:
1. Initializer traits `PinInit<T, E>` and `Init<T, E>` that act like
closures.
2. Macros to create these initializer traits safely.
3. Functions to allow manually writing initializers.
The initializers (an `impl PinInit<T, E>`) receive a raw pointer pointing
to uninitialized memory and their job is to fully initialize a `T` at that
location. If initialization fails, they return an error (`E`) by value.
This way of initializing cannot be safely exposed to the user, since it
relies upon these properties outside of the control of the trait:
- the memory location (slot) needs to be valid memory,
- if initialization fails, the slot should not be read from,
- the value in the slot should be pinned, so it cannot move and the memory
cannot be deallocated until the value is dropped.
This is why using an initializer is facilitated by another trait that
ensures these requirements.
These initializers can be created manually by just supplying a closure that
fulfills the same safety requirements as `PinInit<T, E>`. But this is an
`unsafe` operation. To allow safe initializer creation, the `pin_init!` is
provided along with three other variants: `try_pin_init!`, `try_init!` and
`init!`. These take a modified struct initializer as a parameter and
generate a closure that initializes the fields in sequence.
The macros take great care in upholding the safety requirements:
- A shadowed struct type is used as the return type of the closure instead
of `()`. This is to prevent early returns, as these would prevent full
initialization.
- To ensure every field is only initialized once, a normal struct
initializer is placed in unreachable code. The type checker will emit
errors if a field is missing or specified multiple times.
- When initializing a field fails, the whole initializer will fail and
automatically drop fields that have been initialized earlier.
- Only the correct initializer type is allowed for unpinned fields. You
cannot use a `impl PinInit<T, E>` to initialize a structurally not pinned
field.
To ensure the last point, an additional macro `#[pin_data]` is needed. This
macro annotates the struct itself and the user specifies structurally
pinned and not pinned fields.
Because dropping a pinned struct is also not allowed to break the pinning
invariants, another macro attribute `#[pinned_drop]` is needed. This
macro is introduced in a following commit.
These two macros also have mechanisms to ensure the overall safety of the
API. Additionally, they utilize a combined proc-macro, declarative macro
design: first a proc-macro enables the outer attribute syntax `#[...]` and
does some important pre-parsing. Notably this prepares the generics such
that the declarative macro can handle them using token trees. Then the
actual parsing of the structure and the emission of code is handled by a
declarative macro.
For pin-projections the crates `pin-project` [4] and `pin-project-lite` [5]
had been considered, but were ultimately rejected:
- `pin-project` depends on `syn` [6] which is a very big dependency, around
50k lines of code.
- `pin-project-lite` is a more reasonable 5k lines of code, but contains a
very complex declarative macro to parse generics. On top of that it
would require modification that would need to be maintained
independently.
Link: https://rust-for-linux.com/the-safe-pinned-initialization-problem [1]
Link: 0a04dc4ddd [2]
Link: f509ede33f/samples/rust/rust_miscdev.rs [3]
Link: https://crates.io/crates/pin-project [4]
Link: https://crates.io/crates/pin-project-lite [5]
Link: https://crates.io/crates/syn [6]
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-7-y86-dev@protonmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This function mirrors `UnsafeCell::raw_get`. It avoids creating a
reference and allows solely using raw pointers.
The `pin-init` API will be using this, since uninitialized memory
requires raw pointers.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-6-y86-dev@protonmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Change the error type of the constructors of `Arc` and `UniqueArc` to be
`AllocError` instead of `Error`. This makes the API more clear as to
what can go wrong when calling `try_new` or its variants.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20230408122429.1103522-4-y86-dev@protonmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add the `quote!` macro for creating `TokenStream`s directly via the
given Rust tokens. It also supports repetitions using iterators.
It will be used by the pin-init API proc-macros to generate code.
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-3-y86-dev@protonmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This feature enables the use of the `pin!` macro for the `stack_pin_init!`
macro. This feature is already stabilized in Rust version 1.68.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20230408122429.1103522-2-y86-dev@protonmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a helper function to easily return C result codes from a Rust function
that calls functions which return a Result<T>.
Lina: Imported from rust-for-linux/rust, originally developed by Wedson
as part of file_operations.rs. Added the allow() flags since there is no
user in the kernel crate yet and fixed a typo in a comment. Replaced the
macro with a function taking a closure, per discussion on the ML.
Co-developed-by: Fox Chen <foxhlchen@gmail.com>
Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://lore.kernel.org/r/20230224-rust-error-v3-6-03779bddc02b@asahilina.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Some kernel C API functions return a pointer which embeds an optional
`errno`. Callers are supposed to check the returned pointer with
`IS_ERR()` and if this returns `true`, retrieve the `errno` using
`PTR_ERR()`.
Create a Rust helper function to implement the Rust equivalent:
transform a `*mut T` to `Result<*mut T>`.
Lina: Imported from rust-for-linux/linux, with subsequent refactoring
and contributions squashed in and attributed below. Renamed the function
to from_err_ptr().
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Co-developed-by: Fox Chen <foxhlchen@gmail.com>
Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://lore.kernel.org/r/20230224-rust-error-v3-5-03779bddc02b@asahilina.net
[ Add a removal of `#[allow(dead_code)]`. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a to_result() helper to convert kernel C return values to a Rust
Result, mapping >=0 values to Ok(()) and negative values to Err(...),
with Error::from_errno() ensuring that the errno is within range.
Lina: Imported from rust-for-linux/rust, originally developed by Wedson
as part of the AMBA device driver support.
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://lore.kernel.org/r/20230224-rust-error-v3-4-03779bddc02b@asahilina.net
[ Add a removal of `#[allow(dead_code)]`. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a function to create `Error` values out of a kernel error return,
which safely upholds the invariant that the error code is well-formed
(negative and greater than -MAX_ERRNO). If a malformed code is passed
in, it will be converted to EINVAL.
Lina: Imported from rust-for-linux/rust as authored by Miguel and Fox
with refactoring from Wedson, renamed from_kernel_errno() to
from_errno().
Co-developed-by: Fox Chen <foxhlchen@gmail.com>
Signed-off-by: Fox Chen <foxhlchen@gmail.com>
Co-developed-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://lore.kernel.org/r/20230224-rust-error-v3-3-03779bddc02b@asahilina.net
[ Mark the new associated functions as `#[allow(dead_code)]`. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This is the Rust equivalent to ERR_PTR(), for use in C callbacks.
Marked as #[allow(dead_code)] for now, since it does not have any
consumers yet.
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20230224-rust-error-v3-2-03779bddc02b@asahilina.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This is kernel code, so specifying "kernel" is redundant. Let's simplify
things and just call it to_errno().
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://lore.kernel.org/r/20230224-rust-error-v3-1-03779bddc02b@asahilina.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
We can already create `UniqueArc<MaybeUninit<T>>` instances with
`UniqueArc::try_new_uninit()` and write to them with `write()`. Add
the missing unsafe `assume_init()` function to promote it to
`UniqueArc<T>`, so users can do piece-wise initialization of the
contents instead of doing it all at once as long as they keep the
invariants (the same requirements as `MaybeUninit::assume_init()`).
This mirrors the std `Arc::assume_init()` function. In the kernel,
since we have `UniqueArc`, arguably this only belongs there since most
use cases will initialize it immediately after creating it, before
demoting it to `Arc` to share it.
[ Miguel: The "Rust pin-init API for pinned initialization of structs"
patch series [1] from Benno Lossin contains a very similar patch:
rust: sync: add `assume_init` to `UniqueArc`
Adds the `assume_init` function to `UniqueArc<MaybeUninit<T>>` that
unsafely assumes the value to be initialized and yields a value of type
`UniqueArc<T>`. This function is used when manually initializing the
pointee of an `UniqueArc`.
To make that patch a noop and thus drop it, I adjusted the `SAFETY`
comment here to be the same as in the current latest version of
that series (v7).
I have also brought the `Reviewed-by`s there into here, and reworded
the `Co-authored-by` into `Co-developed-by`. ]
Link: https://lore.kernel.org/r/20230408122429.1103522-5-y86-dev@protonmail.com [1]
Co-developed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Wedson Almeida Filho <walmeida@microsoft.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20230224-rust-arc-v2-2-5c97a865b276@asahilina.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The CPSW9G instance of CPSW Ethernet Switch on TI's J784S4 SoC supports
additional PHY modes like QSGMII. Add a compatible for it.
Enable the use of "ti,qsgmii-main-ports" property for J784S4 CPSW9G.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230315092408.1722114-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In the wiz_mode_select() function, the configuration performed for
PHY_TYPE_USXGMII is unreachable. Fix it.
Fixes: b64a85fb8f ("phy: ti: phy-j721e-wiz.c: Add usxgmii support in wiz driver")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230403094552.929108-1-s-vadapalli@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add register sequences for PCIe + SGMII PHY multilink configuration.
This has been validated on TI J7 platforms.
Signed-off-by: Swapnil Jakhade <sjakhade@cadence.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20230403085644.10187-1-sjakhade@cadence.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Check during cs35l56_system_resume() whether the firmware patch must
be applied again.
The FIRMWARE_MISSING flag in the PROTECTION_STATUS register indicates
whether the firmware has been patched.
In non-secure mode the FIRMWARE_MISSING flag is cleared at the end of
dsp_work(). If it is set after system-resume we know that dsp_work()
must be run again.
In secure mode the pre-OS loader will have done the secure patching
and cleared the FIRMWARE_MISSING flag. So this flag does not tell us
whether firmware memory was lost. But the driver could only be
downloading non-secure tunings, which is always safe to do.
If the driver has control of RESET we will have asserted it during
suspend so the firmware patch will have been lost. The driver would only
have control of RESET in non-secure mode.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/168122674550.26.8545058503709956172@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Delete the 'removing' flag and don't kick init_completion to make a
quick cancel of dsp_work(). Just let it timeout on the wait for the
completion.
Simplify the code to standard cancelling or flushing of the work.
This avoids introducing corner cases from a layer of custom signalling.
It also avoids potential race conditions when system-suspend handling
is added.
Unless the hardware is broken, the dsp_work() will already have started
and passed the completion before the driver would want to cancel it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/168122674746.26.16881587647873355224@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This adds the main handling for system suspend but does not handle
re-patching the firmware after system resume.
This is a multi-stage suspend and resume because if there is a
RESET line it is almost certain that it will be shared by all the
amps. So every amp must have done its suspend before we can
assert RESET. Likewise we must de-assert RESET before the amps
can resume.
It's preferable to assert RESET before we turning off regulators, and
while they power up.
The actual suspend and resume is done by using the pair
pm_runtime_force_suspend() and pm_runtime_force_resume() to
re-use our runtime suspend/resume sequences.
pm_runtime_force_suspend() will disable our pm_runtime. If we were
runtime-resumed it calls our runtime_suspend().
pm_runtime_force_resume() re-enables pm_runtime and if we were
originally runtime-resumed before the pm_runtime_force_suspend()
it calls our runtime_resume(). Otherwise it leaves us
runtime-suspended.
The general process is therefore:
suspend() -> finish dsp_work and then run our runtime_suspend
suspend_late() -> assert RESET and turn off supplies
resume_early() -> enable supplies and de-assert RESET
resume() -> pm_runtime_force_resume()
In addition, to prevent the IRQ handler running in the period
between pm_runtime_force_suspend() and pm_runtime_force_resume()
the parent IRQ is temporarily disabled:
- from suspend until suspend_noirq
- from resume_noirq until resume
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230411152528.329803-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When we are resuming from a system suspend the CS35L56 has probably
been hard reset (usually a power-on reset). So we must wait for the
firmware to boot. On SoundWire we also need it to re-initialize before
we can read the registers to check the CS35L56 state.
The simplest way to handle this is for runtime-resume to always wait
for firmware boot. If the firmware is already booted the overhead is
only one register read.
The system-resume will have to runtime-resume the driver anyway before
attempting any register access. So this will automatically include the
wait for initialization on SoundWire.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230411152528.329803-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
At the start of dsp_work() only wait for init_completion if !init_done.
This allows system suspend to re-queue dsp_work() without having to
do a dummy complete() of init_completion.
A dummy completion in system suspend would have to be conditional on
init_done. But that would create a possible race condition between our
system resume and cs35l56_init() in the corner case that we suspend right
after the SoundWire core has enumerated and reported ATTACHED.
It is safer and simpler to have cs35l56_init() as the only place that
init_completion is completed, and dsp_work() as the only place that
it is consumed.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230411152528.329803-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If we use a DAPM widget instead of mute_stream() to send the
PLAY command we can issue the plays to multiple amps in parallel.
With mute_stream each codec driver instance is called one at a
time so we get N * PS0 delay time.
DAPM does each stage on every widget in a card before moving to
the next stage. So all amps will do the PRE_PMU then all will do
the POST_PMU. The PLAY is sent in the PRE_PMU so that they all
power-up in parallel. After the PS0 wait in the first POST_PMU
all the other amps will also be ready so there won't be any extra
delay, or it will be negligible.
There's also no point waiting for the MBOX ack in the PRE_PMU.
We won't see a PS0 state in POST_PMU if it didn't ack the PLAY
command. So we can save a little extra time.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230411152528.329803-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Benjamin Bara <bbara93@gmail.com>:
Follow-up for my initial patch regarding the disabling of unused
voltage monitors. We use the PWR_OK functionality, which asserts GP_FB2
if every monitored voltage is in range. This patch should provide the
possibility to deactivate a voltage monitor from the DT if the regulator
might be disabled during run time. For this purpose, the regulator
notification support is used:
https://lore.kernel.org/all/cover.1622628333.git.matti.vaittinen@fi.rohmeurope.com/
Add support for the mediatek hdmi phy on MT8195 SoC
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20220919-v8-3-a84c80468fe9@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some phys, such as mt8195, needs to have a configure callback defined.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20220919-v8-2-a84c80468fe9@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add a compatible for the HDMI PHY on MT8195
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20220919-v8-1-a84c80468fe9@baylibre.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Fix netfs_extract_iter_to_sg() for ITER_UBUF and ITER_IOVEC to set the
size of the page to the part of the page extracted, not the remaining
amount of data in the extracted page array at that point.
This doesn't yet affect anything as cifs, the only current user, only
passes in non-user-backed iterators.
Fixes: 0185846975 ("netfs: Add a function to extract an iterator into a scatterlist")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: Steve French <sfrench@samba.org>
Cc: Shyam Prasad N <nspmangalore@gmail.com>
Cc: Rohith Surabattula <rohiths.msft@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
