* irq/plic-edge-fixes:
: .
: Work around broken PLIC implementations that deal pretty
: badly with edge-triggered interrupts. Flag two implementations
: as affected.
: .
irqchip/sifive-plic: Fix T-HEAD PLIC edge trigger handling
dt-bindings: interrupt-controller: Require trigger type for T-HEAD PLIC
irqchip/sifive-plic: Add support for Renesas RZ/Five SoC
dt-bindings: interrupt-controller: sifive,plic: Document Renesas RZ/Five SoC
Signed-off-by: Marc Zyngier <maz@kernel.org>
The T-HEAD PLIC ignores additional edges seen while an edge-triggered
interrupt is being handled. Because of this behavior, the driver needs
to complete edge-triggered interrupts in the .irq_ack callback before
handling them, instead of in the .irq_eoi callback afterward. Otherwise,
it could miss some interrupts.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630100241.35233-5-samuel@sholland.org
The RISC-V PLIC specification unfortunately allows PLIC implementations
to ignore edges seen while an edge-triggered interrupt is being handled:
Depending on the design of the device and the interrupt handler,
in between sending an interrupt request and receiving notice of its
handler’s completion, the gateway might either ignore additional
matching edges or increment a counter of pending interrupts.
Like the NCEPLIC100, the T-HEAD C900 PLIC also has this behavior. Thus
it also needs to inform software about each interrupt's trigger type, so
the driver can use the right interrupt flow.
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630100241.35233-4-samuel@sholland.org
The Renesas RZ/Five SoC has a RISC-V AX45MP AndesCore with NCEPLIC100. The
NCEPLIC100 supports both edge-triggered and level-triggered interrupts. In
case of edge-triggered interrupts NCEPLIC100 ignores the next interrupt
edge until the previous completion message has been received and
NCEPLIC100 doesn't support pending interrupt counter, hence losing the
interrupts if not acknowledged in time.
So the workaround for edge-triggered interrupts to be handled correctly
and without losing is that it needs to be acknowledged first and then
handler must be run so that we don't miss on the next edge-triggered
interrupt.
This patch adds a new compatible string for NCEPLIC100 (from Andes
Technology) interrupt controller found on Renesas RZ/Five SoC and adds
quirk bits to priv structure and implements PLIC_QUIRK_EDGE_INTERRUPT
quirk to change the interrupt flow.
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630100241.35233-3-samuel@sholland.org
Renesas RZ/Five (R9A07G043) SoC is equipped with NCEPLIC100 RISC-V
platform level interrupt controller from Andes Technology. NCEPLIC100
ignores subsequent EDGE interrupts until the previous EDGE interrupt is
completed, due to this issue we have to follow different interrupt flow
for EDGE and LEVEL interrupts.
This patch documents Renesas RZ/Five (R9A07G043) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630100241.35233-2-samuel@sholland.org
Add missing break in one of the switch statement.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: cdb09e6231 ("ASoC: codecs: wsa883x: add control, dapm widgets and map")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220701125515.32332-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a specific override for ID_AA64SMFR0_EL1.FA64, which
disables the full A64 streaming SVE mode.
Note that no alias is provided for this, as this is already
covered by arm64.nosme, and is only added as a debugging
facility.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-10-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In order to be able to completely disable SVE even if the HW
seems to support it (most likely because the FW is broken),
move the SVE setup into the EL2 finalisation block, and
use a new idreg override to deal with it.
Note that we also nuke id_aa64zfr0_el1 as a byproduct, and
that SME also gets disabled, due to the dependency between the
two features.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-9-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In order to be able to completely disable SME even if the HW
seems to support it (most likely because the FW is broken),
move the SME setup into the EL2 finalisation block, and
use a new idreg override to deal with it.
Note that we also nuke id_aa64smfr0_el1 as a byproduct.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-8-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In order to feal with early override of features that are not
classically encoded in a standard ID register with a 4 bit wide
field, add a primitive that takes a sysreg value as an input
(instead of the usual sysreg name) as well as a bit field
width (usually 4).
No functional change.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-7-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently, the override mechanism can only deal with 4bit fields,
which is the most common case. However, we now have a bunch of
ID registers that have more diverse field widths, such as
ID_AA64SMFR0_EL1, which has fields that are a single bit wide.
Add the support for variable width, and a macro that encodes
a feature width of 4 for all existing override.
No functional change.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-6-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Checking for a feature being supported from assembly code is
a bit tedious if we need to factor in the idreg override.
Since we already have such code written for forcing nVHE, move
the whole thing into a macro. This heavily relies on the override
structure being called foo_override for foo_el1.
No functional change.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-5-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
For CPUs that have the unfortunate mis-feature to be stuck in
VHE mode, we perform a funny dance where we completely shortcut
the normal boot process to enable VHE and run the kernel at EL2,
and only then start booting the kernel.
Not only this is pretty ugly, but it means that the EL2 finalisation
occurs before we have processed the sysreg override.
Instead, start executing the kernel as if it was an EL1 guest and
rely on the normal EL2 finalisation to go back to EL2.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-4-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
As we're about to switch the way E2H-stuck CPUs boot, save
the boot CPU E2H state as a flag tied to the boot mode
that can then be checked by the idreg override code.
This allows us to replace the is_kernel_in_hyp_mode() check
with a simple comparison with this state, even when running
at EL1. Note that this flag isn't saved in __boot_cpu_mode,
and is only kept in a register in the assembly code.
Use with caution.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-3-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
as we are about to perform a lot more in 'mutate_to_vhe' than
we currently do, this function really becomes the point where
we finalise the basic EL2 configuration.
Reflect this into the code by renaming a bunch of things:
- HVC_VHE_RESTART -> HVC_FINALISE_EL2
- switch_to_vhe --> finalise_el2
- mutate_to_vhe -> __finalise_el2
No functional changes.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630160500.1536744-2-maz@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Joey reports that booting 52-bit VA capable builds on 52-bit VA capable
CPUs is broken since commit 0d9b1ffefa ("arm64: mm: make vabits_actual
a build time constant if possible"). This is due to the fact that the
primary CPU reads the vabits_actual variable before it has been
assigned.
The reason for deferring the assignment of vabits_actual was that we try
to perform as few stores to memory as we can with the MMU and caches
off, due to the cache coherency issues it creates.
Since __cpu_setup() [which is where the read of vabits_actual occurs] is
also called on the secondary boot path, we cannot just read the CPU ID
registers directly, given that the size of the VA space is decided by
the capabilities of the primary CPU. So let's read vabits_actual only on
the secondary boot path, and read the CPU ID registers directly on the
primary boot path, by making it a function parameter of __cpu_setup().
To ensure that all users of vabits_actual (including kasan_early_init())
observe the correct value, move the assignment of vabits_actual back
into asm code, but still defer it to after the MMU and caches have been
enabled.
Cc: Will Deacon <will@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 0d9b1ffefa ("arm64: mm: make vabits_actual a build time constant if possible")
Reported-by: Joey Gouly <joey.gouly@arm.com>
Co-developed-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220701111045.2944309-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
- ADC and SPI support for the RZ/G2UL Soc and the RZ/G2UL SMARC EVK
development board,
- Ethernet support for the RZ/V2M SoC and the RZV2MEVK2 development
board,
- Thermal, IOMMU, Universal Flash Storage, octal Cortex-A55, and full
serial support for the R-Car S4-8 SoC on the Spider development
board,
- RTC support for the RZN1D-DB board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYrVvPAAKCRCKwlD9ZEnx
cItXAQCzPwl/XNdNztGdFpNHlHivT0bDZMdgoybU9pZmjaZ3AAD/Yj2wFbIdXc+t
pYgoUNcMTdiDiEzDLDPG4YUFtjgfnAs=
=GZcf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VSLS
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.20
- ADC and SPI support for the RZ/G2UL Soc and the RZ/G2UL SMARC EVK
development board,
- Ethernet support for the RZ/V2M SoC and the RZV2MEVK2 development
board,
- Thermal, IOMMU, Universal Flash Storage, octal Cortex-A55, and full
serial support for the R-Car S4-8 SoC on the Spider development
board,
- RTC support for the RZN1D-DB board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.20-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (27 commits)
ARM: dts: rza2mevb: Fix LED node names
arm64: dts: renesas: Fix thermal-sensors on single-zone sensors
arm64: dts: renesas: spider-cpu: Enable SCIF0 on second connector
arm64: dts: renesas: r8a779f0: Add SCIF nodes
arm64: dts: renesas: r8a779f0: Add HSCIF nodes
arm64: dts: renesas: r8a779f0: Add DMA properties to SCIF3
arm64: dts: renesas: Add missing space after remote-endpoint
arm64: dts: renesas: rzg2ul-smarc-som: Enable ADC on SMARC platform
arm64: dts: renesas: rzg2ul-smarc: Enable RSPI1 on carrier board
arm64: dts: renesas: r8a779f0: Add CPU core clocks
arm64: dts: renesas: r8a779f0: Add CPUIdle support
arm64: dts: renesas: r8a779f0: Add secondary CA55 CPU cores
arm64: dts: renesas: r8a779f0: Add L3 cache controller
arm64: dts: renesas: r8a779a0: Add CPU0 core clock
arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values
ARM: dts: r9a06g032-rzn1d400-db: Enable rtc0
arm64: dts: renesas: rzg2l-smarc: Use proper bool operator
arm64: dts: renesas: r8a779f0: Add UFS node
arm64: dts: renesas: r8a779f0: Add iommus to DMAC nodes
arm64: dts: renesas: r8a779f0: Add IPMMU nodes
...
Link: https://lore.kernel.org/r/cover.1656069634.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Add CPU cache, UFS to Tesla FSD.
2. Add reboot-mode (boot into specific bootloader mode) to ExynosAutov9.
3. Add watchdogs to ExynosAutov9.
4. Add eMMC to Exynos7885 JackpotLTE (Samsung Galaxy A8).
5. DTS cleanup: white-spaces, node names, LED color/function.
6. Switch to DTS-local header for pinctrl register values instead of
bindings header. The bindings header is being deprecated because it
does not reflect the purpose of bindings.
-----BEGIN PGP SIGNATURE-----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=lCJe
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=nLDq
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.20
1. Add CPU cache, UFS to Tesla FSD.
2. Add reboot-mode (boot into specific bootloader mode) to ExynosAutov9.
3. Add watchdogs to ExynosAutov9.
4. Add eMMC to Exynos7885 JackpotLTE (Samsung Galaxy A8).
5. DTS cleanup: white-spaces, node names, LED color/function.
6. Switch to DTS-local header for pinctrl register values instead of
bindings header. The bindings header is being deprecated because it
does not reflect the purpose of bindings.
* tag 'samsung-dt64-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add internal eMMC support to jackpotlte
dt-bindings: clock: Add indices for Exynos7885 TREX clocks
dt-bindings: clock: Add bindings for Exynos7885 CMU_FSYS
arm64: dts: exynos: enable secondary ufs devices ExynosAutov9 SADK
arm64: dts: exynos: add secondary ufs devices in ExynosAutov9
arm64: dts: fsd: use local header for pinctrl register values
arm64: dts: exynos: use local header for pinctrl register values
arm64: dts: exynos: align MMC node name with dtschema
arm64: dts: exynos: adjust DT style of ufs nodes in ExynosAutov9
arm64: dts: exynos: adjust whitespace around '='
arm64: dts: fsd: add ufs device node
arm64: dts: exynos: add watchdog in ExynosAutov9
arm64: dts: exynos: add syscon reboot/reboot_mode support in ExynosAutov9
dt-bindings: soc: add samsung,boot-mode definitions
arm64: dts: fsd: Add cpu cache information
Link: https://lore.kernel.org/r/20220624080746.31947-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Add display panel and backlight to P4 Note family (Samsung Galaxy
Note 10.1).
2. DTS cleanup: white-spaces, node names, LED color/function.
3. Switch to DTS-local header for pinctrl register values instead of
bindings header. The bindings header is being deprecated because it
does not reflect the purpose of bindings.
-----BEGIN PGP SIGNATURE-----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=I+fO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=9Mg+
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.20
1. Add display panel and backlight to P4 Note family (Samsung Galaxy
Note 10.1).
2. DTS cleanup: white-spaces, node names, LED color/function.
3. Switch to DTS-local header for pinctrl register values instead of
bindings header. The bindings header is being deprecated because it
does not reflect the purpose of bindings.
* tag 'samsung-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: add function and color to LED nodes in Odroid XU/XU3
ARM: dts: exynos: add function and color to LED node in Odroid XU4
ARM: dts: exynos: add function and color to LED node in Odroid HC1
ARM: dts: exynos: add function and color to LED nodes in Odroid X/X2
ARM: dts: exynos: add function and color to LED node in Odroid U3
ARM: dts: exynos: add function and color to LED nodes in Itop Elite
ARM: dts: exynos: add function to LED nodes in Tiny4412
ARM: dts: exynos: add function to LED node in Origen 4210
ARM: dts: exynos: add function and color to aat1290 flash LED node in Galaxy S3
ARM: dts: exynos: align aat1290 flash LED node with bindings in Galaxy S3
ARM: dts: s5pv210: align gpio-key node names with dtschema
ARM: dts: exynos: align gpio-key node names with dtschema
ARM: dts: exynos: use local header for pinctrl register values
ARM: dts: s5pv210: use local header for pinctrl register values
ARM: dts: s3c64xx: use local header for pinctrl register values
ARM: dts: s3c2410: use local header for pinctrl register values
ARM: dts: exynos: align MMC node name with dtschema
ARM: dts: exynos: adjust whitespace around '='
ARM: dts: exynos: add panel and backlight to p4note
Link: https://lore.kernel.org/r/20220624080746.31947-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The sparse tool complains as follows:
drivers/irqchip/irq-apple-aic.c:231:1: warning:
symbol 'use_fast_ipi' was not declared. Should it be static?
This symbol is not used outside of irq-apple-aic.c, so marks it static.
Fixes: 2cf6821166 ("irqchip/apple-aic: Add Fast IPI support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220618072824.562350-1-weiyongjun1@huawei.com
Commit b84dc7f0e3 ("irqchip/xilinx: Remove microblaze+zynq
dependency") relaxed the dependencies on the Xilinx interrupt controller
to be OF only, but some OF architectures (s390 for example) do not
support OF_ADDRESS and so a build of the driver will result in undefined
references to of_iomap/iounmap and friends.
Fixes: b84dc7f0e3 ("irqchip/xilinx: Remove microblaze+zynq dependency")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220630111008.3838307-1-jamie@jamieiles.com
On kexec file load, the Integrity Measurement Architecture (IMA)
subsystem may verify the IMA signature of the kernel and initramfs, and
measure it. The command line parameters passed to the kernel in the
kexec call may also be measured by IMA.
A remote attestation service can verify a TPM quote based on the TPM
event log, the IMA measurement list and the TPM PCR data. This can
be achieved only if the IMA measurement log is carried over from the
current kernel to the next kernel across the kexec call.
PowerPC and ARM64 both achieve this using device tree with a
"linux,ima-kexec-buffer" node. x86 platforms generally don't make use of
device tree, so use the setup_data mechanism to pass the IMA buffer to
the new kernel.
Signed-off-by: Jonathan McDowell <noodles@fb.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> # IMA function definitions
Link: https://lore.kernel.org/r/YmKyvlF3my1yWTvK@noodles-fedora-PC23Y6EG
- Fix the SDIO description for imx7d-smegw01 board to ensure there is
no communication made at 1.8V.
- Fix pgc_ispdwp power-domain clock, which should be
IMX8MP_CLK_MEDIA_ISP_ROOT.
- Re-enable framebuffer support in mxs_defconfig to fix a Kconfig
regression.
- A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP
based boards to leave reserved bits untouched.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmK7tGoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6gQQgAsaOPV6XCcWJCf+BAJkZvk8ba4Q4C
F/fZHnqbXFUeQqjMckVv1b9UlGLw2uNeWoW0FfQ/p8WV+uDLIlpp19wpvJHKkTM1
U1zIBK0RdJiUrngfCrOedZwHmzg11D3aVn0gotEPbW+S+aXXcW5GXH0Tt2Z/v5mF
hKIxqW1KE+OUpCAoNIehgImFjKjS8fFX4vxMQ81bkdp9iLTNc6kvsHivyXk1wS2F
E5CmaWPlPGHjaKXWvUnh8rO2QstRNTZpYe1FbCheRGBcfT2U6VFPAMYc9EJNM64d
UKSHOsT4l+7D7Jk8CMMYftBII21fwX+Qs3PepE/rnND3WYygH09iFOHNDA==
=6inj
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ZOsU
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.19, round 2:
- Fix the SDIO description for imx7d-smegw01 board to ensure there is
no communication made at 1.8V.
- Fix pgc_ispdwp power-domain clock, which should be
IMX8MP_CLK_MEDIA_ISP_ROOT.
- Re-enable framebuffer support in mxs_defconfig to fix a Kconfig
regression.
- A series from Peng Fan (and Sherry Sun) fixing various pads on i.MX8MP
based boards to leave reserved bits untouched.
* tag 'imx-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp-icore-mx8mp-edim2.2: correct pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings
arm64: dts: imx8mp-venice-gw74xx: correct pad settings
arm64: dts: imx8mp-evk: correct I2C3 pad settings
arm64: dts: imx8mp-evk: correct I2C1 pad settings
arm64: dts: imx8mp-evk: correct I2C5 pad settings
arm64: dts: imx8mp-evk: correct vbus pad settings
arm64: dts: imx8mp-evk: correct eqos pad settings
arm64: dts: imx8mp-evk: correct vbus pad settings
arm64: dts: imx8mp-evk: correct gpio-led pad settings
arm64: dts: imx8mp-evk: correct the uart2 pinctl value
arm64: dts: imx8mp-evk: correct mmc pad settings
ARM: mxs_defconfig: Enable the framebuffer
arm64: dts: imx8mp: correct clock of pgc_ispdwp
ARM: dts: imx7d-smegw01: Fix the SDIO description
Link: https://lore.kernel.org/r/20220629021244.GL819983@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The kernel test robot found this inconsistency:
drivers/soc/ixp4xx/ixp4xx-npe.c:737:34: warning:
'ixp4xx_npe_of_match' defined but not used [-Wunused-const-variable=]
737 | static const struct of_device_id ixp4xx_npe_of_match[] = {
This is because the match is enclosed in the of_match_ptr()
which compiles into NULL when OF is disabled and this
is unnecessary.
Fix it by dropping of_match_ptr() around the match.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220626074315.61209-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This flag is a new way to configure ignore mask which allows adding and
removing the event flags FAN_ONDIR and FAN_EVENT_ON_CHILD in ignore mask.
The legacy FAN_MARK_IGNORED_MASK flag would always ignore events on
directories and would ignore events on children depending on whether
the FAN_EVENT_ON_CHILD flag was set in the (non ignored) mask.
FAN_MARK_IGNORE can be used to ignore events on children without setting
FAN_EVENT_ON_CHILD in the mark's mask and will not ignore events on
directories unconditionally, only when FAN_ONDIR is set in ignore mask.
The new behavior is non-downgradable. After calling fanotify_mark() with
FAN_MARK_IGNORE once, calling fanotify_mark() with FAN_MARK_IGNORED_MASK
on the same object will return EEXIST error.
Setting the event flags with FAN_MARK_IGNORE on a non-dir inode mark
has no meaning and will return ENOTDIR error.
The meaning of FAN_MARK_IGNORED_SURV_MODIFY is preserved with the new
FAN_MARK_IGNORE flag, but with a few semantic differences:
1. FAN_MARK_IGNORED_SURV_MODIFY is required for filesystem and mount
marks and on an inode mark on a directory. Omitting this flag
will return EINVAL or EISDIR error.
2. An ignore mask on a non-directory inode that survives modify could
never be downgraded to an ignore mask that does not survive modify.
With new FAN_MARK_IGNORE semantics we make that rule explicit -
trying to update a surviving ignore mask without the flag
FAN_MARK_IGNORED_SURV_MODIFY will return EEXIST error.
The conveniene macro FAN_MARK_IGNORE_SURV is added for
(FAN_MARK_IGNORE | FAN_MARK_IGNORED_SURV_MODIFY), because the
common case should use short constant names.
Link: https://lore.kernel.org/r/20220629144210.2983229-4-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Create helper fanotify_may_update_existing_mark() for checking for
conflicts between existing mark flags and fanotify_mark() flags.
Use variable mark_cmd to make the checks for mark command bits
cleaner.
Link: https://lore.kernel.org/r/20220629144210.2983229-3-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Setting flags FAN_ONDIR FAN_EVENT_ON_CHILD in ignore mask has no effect.
The FAN_EVENT_ON_CHILD flag in mask implicitly applies to ignore mask and
ignore mask is always implicitly applied to events on directories.
Define a mark flag that replaces this legacy behavior with logic of
applying the ignore mask according to event flags in ignore mask.
Implement the new logic to prepare for supporting an ignore mask that
ignores events on children and ignore mask that does not ignore events
on directories.
To emphasize the change in terminology, also rename ignored_mask mark
member to ignore_mask and use accessors to get only the effective
ignored events or the ignored events and flags.
This change in terminology finally aligns with the "ignore mask"
language in man pages and in most of the comments.
Link: https://lore.kernel.org/r/20220629144210.2983229-2-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Within gsm_activate_mux() all timers and locks are initiated before the
actual resource for the control channel is allocated. This can lead to race
conditions.
Allocate the control channel DLCI object first to avoid race conditions.
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220701122332.2039-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current implementation queues up new control and user packets as needed
and processes this queue down to the ldisc in the same code path.
That means that the upper and the lower layer are hard coupled in the code.
Due to this deadlocks can happen as seen below while transmitting data,
especially during ldisc congestion. Furthermore, the data channels starve
the control channel on high transmission load on the ldisc.
Introduce an additional control channel data queue to prevent timeouts and
link hangups during ldisc congestion. This is being processed before the
user channel data queue in gsm_data_kick(), i.e. with the highest priority.
Put the queue to ldisc data path into a workqueue and trigger it whenever
new data has been put into the transmission queue. Change
gsm_dlci_data_sweep() accordingly to fill up the transmission queue until
TX_THRESH_HI. This solves the locking issue, keeps latency low and provides
good performance on high data load.
Note that now all packets from a DLCI are removed from the internal queue
if the associated DLCI was closed. This ensures that no data is sent by the
introduced write task to an already closed DLCI.
BUG: spinlock recursion on CPU#0, test_v24_loop/124
lock: serial8250_ports+0x3a8/0x7500, .magic: dead4ead, .owner: test_v24_loop/124, .owner_cpu: 0
CPU: 0 PID: 124 Comm: test_v24_loop Tainted: G O 5.18.0-rc2 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl+0x34/0x44
do_raw_spin_lock+0x76/0xa0
_raw_spin_lock_irqsave+0x72/0x80
uart_write_room+0x3b/0xc0
gsm_data_kick+0x14b/0x240 [n_gsm]
gsmld_write_wakeup+0x35/0x70 [n_gsm]
tty_wakeup+0x53/0x60
tty_port_default_wakeup+0x1b/0x30
serial8250_tx_chars+0x12f/0x220
serial8250_handle_irq.part.0+0xfe/0x150
serial8250_default_handle_irq+0x48/0x80
serial8250_interrupt+0x56/0xa0
__handle_irq_event_percpu+0x78/0x1f0
handle_irq_event+0x34/0x70
handle_fasteoi_irq+0x90/0x1e0
__common_interrupt+0x69/0x100
common_interrupt+0x48/0xc0
asm_common_interrupt+0x1e/0x40
RIP: 0010:__do_softirq+0x83/0x34e
Code: 2a 0a ff 0f b7 ed c7 44 24 10 0a 00 00 00 48 c7 c7 51 2a 64 82 e8 2d
e2 d5 ff 65 66 c7 05 83 af 1e 7e 00 00 fb b8 ff ff ff ff <49> c7 c2 40 61
80 82 0f bc c5 41 89 c4 41 83 c4 01 0f 84 e6 00 00
RSP: 0018:ffffc90000003f98 EFLAGS: 00000286
RAX: 00000000ffffffff RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff82642a51 RDI: ffffffff825bb5e7
RBP: 0000000000000200 R08: 00000008de3271a8 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000030 R14: 0000000000000000 R15: 0000000000000000
? __do_softirq+0x73/0x34e
irq_exit_rcu+0xb5/0x100
common_interrupt+0xa4/0xc0
</IRQ>
<TASK>
asm_common_interrupt+0x1e/0x40
RIP: 0010:_raw_spin_unlock_irqrestore+0x2e/0x50
Code: 00 55 48 89 fd 48 83 c7 18 53 48 89 f3 48 8b 74 24 10 e8 85 28 36 ff
48 89 ef e8 cd 58 36 ff 80 e7 02 74 01 fb bf 01 00 00 00 <e8> 3d 97 33 ff
65 8b 05 96 23 2b 7e 85 c0 74 03 5b 5d c3 0f 1f 44
RSP: 0018:ffffc9000020fd08 EFLAGS: 00000202
RAX: 0000000000000000 RBX: 0000000000000246 RCX: 0000000000000000
RDX: 0000000000000004 RSI: ffffffff8257fd74 RDI: 0000000000000001
RBP: ffff8880057de3a0 R08: 00000008de233000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000100 R14: 0000000000000202 R15: ffff8880057df0b8
? _raw_spin_unlock_irqrestore+0x23/0x50
gsmtty_write+0x65/0x80 [n_gsm]
n_tty_write+0x33f/0x530
? swake_up_all+0xe0/0xe0
file_tty_write.constprop.0+0x1b1/0x320
? n_tty_flush_buffer+0xb0/0xb0
new_sync_write+0x10c/0x190
vfs_write+0x282/0x310
ksys_write+0x68/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f3e5e35c15c
Code: 8b 7c 24 08 89 c5 e8 c5 ff ff ff 89 ef 89 44 24 08 e8 58 bc 02 00 8b
44 24 08 48 83 c4 10 5d c3 48 63 ff b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff
ff 76 10 48 8b 15 fd fc 05 00 f7 d8 64 89 02 48 83
RSP: 002b:00007ffcee77cd18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007ffcee77cd70 RCX: 00007f3e5e35c15c
RDX: 0000000000000100 RSI: 00007ffcee77cd90 RDI: 0000000000000003
RBP: 0000000000000100 R08: 0000000000000000 R09: 7efefefefefefeff
R10: 00007f3e5e3bddeb R11: 0000000000000246 R12: 00007ffcee77ce8f
R13: 0000000000000001 R14: 000056214404e010 R15: 00007ffcee77cd90
</TASK>
Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220701122332.2039-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support VF rate limiting with NFDK by adding ndo_set_vf_rate to the NFDK
ops structure.
NFDK is used to communicate via PCIE to NFP-3800 based NICs
while NFD3 is used for other NICs supported by the NFP driver.
The VF rate limit feature is already supported by the driver for NFD3.
Signed-off-by: Bin Chen <bin.chen@corigine.com>
Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Either you use BIT(x) or 1 << x in the same expression.
Mixing them is ridiculous. Go to BIT()
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
parsing and usage of -t got missed in the previous patch.
this patch fixes it
Fixes: 816cda9ae5 ("selftests: net: fib_rule_tests: add support to select a test to run")
Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mat Martineau says:
====================
mptcp: Updates for mem scheduling and SK_RECLAIM
In the "net: reduce tcp_memory_allocated inflation" series (merge commit
e10b02ee5b), Eric Dumazet noted that "Removal of SK_RECLAIM_CHUNK and
SK_RECLAIM_THRESHOLD is left to MPTCP maintainers as a follow up."
Patches 1-3 align MPTCP with the above TCP changes to forward memory
allocation, reclaim, and memory scheduling.
Patch 4 removes the SK_RECLAIM_* macros as Eric requested.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
There are no more users for the mentioned macros, just
drop them.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to commit 7c80b038d2 ("net: fix sk_wmem_schedule() and
sk_rmem_schedule() errors"), let the MPTCP receive path schedule
exactly the required amount of memory.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 4890b686f4 ("net: keep sk->sk_forward_alloc as small as
possible"), the MPTCP protocol is the last SK_RECLAIM_CHUNK and
SK_RECLAIM_THRESHOLD users.
Update the MPTCP reclaim schema to match the core/TCP one and drop the
mentioned macros. This additionally clean the MPTCP code a bit.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The memory accounting is broken in such exceptional code
path, and after commit 4890b686f4 ("net: keep sk->sk_forward_alloc
as small as possible") we can't find much help there.
Drop the broken code.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The interest of maintaining the DaVinci DM644x board files seems
very low. Patches to convert the EVM board to use GPIO descriptors
has not been reviewed, tested or merged for several merge
windows in a row, see link below.
When I look in the logs for the board files I see nothing but
generic kernel maintenance and no testing on real hardware for
years.
I conclude the DM646x board files are unused and can be deleted.
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Matt Porter <mporter@konsulko.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/linux-arm-kernel/20220507124536.171930-2-linus.walleij@linaro.org/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>