Correct some simple spelling mistakes in consumer.rst, driver.rst
and using-gpio.rst.
Signed-off-by: Tom Schwindl <schwindl@posteo.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/YrTdAv3YPlCiDr2u@posteo.de
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The clocks are not part of the SoC but provided on the board
(external oscillators). Moving them out of soc node.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Text in ``literal`` markup must be separated by word separators, so text
like ``lowwater``% renders incorrectly. Add the suggested "\ " after two
problematic occurrences.
Signed-off-by: Stephen Kitt <steve@sk2.org>
Link: https://lore.kernel.org/r/20220624110230.595740-1-steve@sk2.org
[jc: tweaked to use "\ "]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
nvdimm_clear_badblocks_region() validates badblock clearing requests
against the span of the region, however it compares the inclusive
badblock request range to the exclusive region range. Fix up the
off-by-one error.
Fixes: 23f4984483 ("libnvdimm: rework region badblocks clearing")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chris Ye <chris.ye@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/165404219489.2445897.9792886413715690399.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220620152313.708768-1-broonie@kernel.org
there is an unexpected word 'is' in the comments that need to be dropped
file: drivers/mtd/nand/raw/sm_common.c
line: 55
/* NOTE: This layout is is not compatabable with SmartMedia, */
changed to:
/* NOTE: This layout is not compatabable with SmartMedia, */
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220622160511.11679-1-jiangjian@cdjrlc.com
amdgpu:
- Adjust GTT size logic
- eDP fix for RMB
- DCN 3.15 fix
- DP training fix
- Color encoding fix for DCN2+
sun4i:
- multiple suspend fixes
vc4:
- rework driver split for rpi4,
fixes mulitple crashers.
panel:
- quirk for Aya Neo Next
i915:
- Revert low voltage SKU check removal to fix display issues
- Apply PLL DCO fraction workaround for ADL-S
- Don't show engine classes not present in client fdinfo
msm:
- Workaround for parade DSI bridge power sequencing
- Fix for multi-planar YUV format offsets
- Limiting WB modes to max sspp linewidth
- Fixing the supported rotations to add 180 back for IGT
- Fix to handle pm_runtime_get_sync() errors to avoid unclocked access
in the bind() path for dpu driver
- Fix the irq_free() without request issue which was a being hit frequently
in CI.
- Fix to add minimum ICC vote in the msm_mdss pm_resume path to address
bootup splats
- Fix to avoid dereferencing without checking in WB encoder
- Fix to avoid crash during suspend in DP driver by ensuring interrupt
mask bits are updated
- Remove unused code from dpu_encoder_virt_atomic_check()
- Fix to remove redundant init of dsc variable
- Fix to ensure mmap offset is initialized to avoid memory corruption
from unpin/evict
- Fix double runpm disable in probe-defer path
- VMA fenced-unpin fixes
- Fix for WB max-width
- Fix for rare dp resolution change issue
-----BEGIN PGP SIGNATURE-----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=yG/r
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2022-06-24' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Fixes for this week, bit larger than normal, but I think the last
couple have been quieter, and it's only rc4.
There are a lot of small msm fixes, and a slightly larger set of vc4
fixes. The vc4 fixes clean up a lot of crashes around the rPI4
hardware differences from earlier ones, and problems in the page flip
and modeset code which assumed earlier hw, so I thought it would be
okay to keep them in.
Otherwise, it's a few amdgpu, i915, sun4i and a panel quirk.
amdgpu:
- Adjust GTT size logic
- eDP fix for RMB
- DCN 3.15 fix
- DP training fix
- Color encoding fix for DCN2+
sun4i:
- multiple suspend fixes
vc4:
- rework driver split for rpi4, fixes mulitple crashers.
panel:
- quirk for Aya Neo Next
i915:
- Revert low voltage SKU check removal to fix display issues
- Apply PLL DCO fraction workaround for ADL-S
- Don't show engine classes not present in client fdinfo
msm:
- Workaround for parade DSI bridge power sequencing
- Fix for multi-planar YUV format offsets
- Limiting WB modes to max sspp linewidth
- Fixing the supported rotations to add 180 back for IGT
- Fix to handle pm_runtime_get_sync() errors to avoid unclocked
access in the bind() path for dpu driver
- Fix the irq_free() without request issue which was a being hit
frequently in CI.
- Fix to add minimum ICC vote in the msm_mdss pm_resume path to
address bootup splats
- Fix to avoid dereferencing without checking in WB encoder
- Fix to avoid crash during suspend in DP driver by ensuring
interrupt mask bits are updated
- Remove unused code from dpu_encoder_virt_atomic_check()
- Fix to remove redundant init of dsc variable
- Fix to ensure mmap offset is initialized to avoid memory corruption
from unpin/evict
- Fix double runpm disable in probe-defer path
- VMA fenced-unpin fixes
- Fix for WB max-width
- Fix for rare dp resolution change issue"
* tag 'drm-fixes-2022-06-24' of git://anongit.freedesktop.org/drm/drm: (41 commits)
amd/display/dc: Fix COLOR_ENCODING and COLOR_RANGE doing nothing for DCN20+
drm/amd/display: Fix typo in override_lane_settings
drm/amd/display: Fix DC warning at driver load
drm/amd: Revert "drm/amd/display: keep eDP Vdd on when eDP stream is already enabled"
drm/amdgpu: Adjust logic around GTT size (v3)
drm/sun4i: Return if frontend is not present
drm/vc4: fix error code in vc4_check_tex_size()
drm/sun4i: Add DMA mask and segment size
drm/vc4: hdmi: Fixed possible integer overflow
drm/i915/display: Re-add check for low voltage sku for max dp source rate
drm/i915/fdinfo: Don't show engine classes not present
drm/i915: Implement w/a 22010492432 for adl-s
drm: panel-orientation-quirks: Add quirk for Aya Neo Next
drm/msm/dp: force link training for display resolution change
drm/msm/dpu: limit wb modes based on max_mixer_width
drm/msm/dp: check core_initialized before disable interrupts at dp_display_unbind()
drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf
drm/msm: Don't overwrite hw fence in hw_init
drm/msm: Drop update_fences()
drm/vc4: Warn if some v3d code is run on BCM2711
...
Move the fiddly bits of the efivar layer into its only remaining user,
efivarfs, and confine its use to that particular module. All other uses
of the EFI variable store have no need for this additional layer of
complexity, given that they either only read variables, or read and
write variables into a separate GUIDed namespace, and cannot be used to
manipulate EFI variables that are covered by the EFI spec and/or affect
the boot flow.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
__efivar_entry_iter() uses a list iterator in a dubious way, i.e., it
assumes that the iteration variable always points to an object of the
appropriate type, even if the list traversal exhausts the list
completely, in which case it will point somewhere in the vicinity of the
list's anchor instead.
Fortunately, we no longer use this function so we can just get rid of it
entirely.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Switch the caching linked-list efivars layer implementation to the newly
introduced efivar get/set variable wrappers, instead of accessing the
lock and the ops pointer directly. This will permit us to move this code
out of the public efivars API, and into efivarfs once the obsolete sysfs
access method is finally removed.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Both efivars and efivarfs uses __efivar_entry_iter() to go over the
linked list that shadows the list of EFI variables held by the firmware,
but fail to call the begin/end helpers that are documented as a
prerequisite.
So switch to the proper version, which is efivar_entry_iter(). Given
that in both cases, efivar_entry_remove() is invoked with the lock held
already, don't take the lock there anymore.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Commit 5d9db88376 ("efi: Add support for a UEFI variable filesystem")
dated Oct 5, 2012, introduced a new efivarfs pseudo-filesystem to
replace the efivars sysfs interface that was used up to that point to
expose EFI variables to user space.
The main problem with the sysfs interface was that it only supported up
to 1024 bytes of payload per file, whereas the underlying variables
themselves are only bounded by a platform specific per-variable and
global limit that is typically much higher than 1024 bytes.
The deprecated sysfs interface is only enabled on x86 and Itanium, other
EFI enabled architectures only support the efivarfs pseudo-filesystem.
So let's finally rip off the band aid, and drop the old interface
entirely. This will make it easier to refactor and clean up the
underlying infrastructure that is shared between efivars, efivarfs and
efi-pstore, and is long overdue for a makeover.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Avoid the efivars layer and simply call the newly introduced EFI
varstore helpers instead. This simplifies the code substantially, and
also allows us to remove some hacks in the shared efivars layer that
were added for efi-pstore specifically.
In order to be able to delete the EFI variable associated with a record,
store the UTF-16 name of the variable in the pstore record's priv field.
That way, we don't have to make guesses regarding which variable the
record may have been loaded from.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The current efivars layer is a jumble of list iterators, shadow data
structures and safe variable manipulation helpers that really belong in
the efivarfs pseudo file system once the obsolete sysfs access method to
EFI variables is removed.
So split off a minimal efivar get/set variable API that reuses the
existing efivars_lock semaphore to mediate access to the various runtime
services, primarily to ensure that performing a SetVariable() on one CPU
while another is calling GetNextVariable() in a loop to enumerate the
contents of the EFI variable store does not result in surprises.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Even though the efivars_lock lock is documented as protecting the
efivars->ops pointer (among other things), efivar_init() happily
releases and reacquires the lock for every EFI variable that it
enumerates. This used to be needed because the lock was originally a
spinlock, which prevented the callback that is invoked for every
variable from being able to sleep. However, releasing the lock could
potentially invalidate the ops pointer, but more importantly, it might
allow a SetVariable() runtime service call to take place concurrently,
and the UEFI spec does not define how this affects an enumeration that
is running in parallel using the GetNextVariable() runtime service,
which is what efivar_init() uses.
In the meantime, the lock has been converted into a semaphore, and the
only reason we need to drop the lock is because the efivarfs pseudo
filesystem driver will otherwise deadlock when it invokes the efivars
API from the callback to create the efivar_entry items and insert them
into the linked list. (EFI pstore is affected in a similar way)
So let's switch to helpers that can be used while the lock is already
taken. This way, we can hold on to the lock throughout the enumeration.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The EFI pstore backend will need to store per-record variable name data
when we switch away from the efivars layer. Add a priv field to struct
pstore_record, and document it as holding a backend specific pointer
that is assumed to be a kmalloc()d buffer, and will be kfree()d when the
entire record is freed.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
cifs_ses::ip_addr wasn't being updated in cifs_session_setup() when
reconnecting SMB sessions thus returning wrong value in
/proc/fs/cifs/DebugData.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Russell King says:
====================
net: pcs: lynx: consolidate gigabit code
This series consolidates the gigabit setup code in the Lynx PCS driver.
In order to do this properly, we first need to fix phylink's
advertisement encoding function to handle QSGMII.
====================
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/YrRbjOEEww38JFIK@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Consolidate lynx_pcs_config_1000basex() and lynx_pcs_config_sgmii() into
a single function. The differences between these two are:
- The value that the link timer is set to.
- The value of the IF_MODE register.
Everything else is identical.
This patch depends on "net: phylink: add QSGMII support to
phylink_mii_c22_pcs_encode_advertisement()".
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The QSGMII MAC-to-PHY reply is the same as the SGMII MAC-to-PHY reply.
Add support for this to phylink_mii_c22_pcs_encode_advertisement().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cover the scenario when we cannot insert a socket into the sockmap, because
it has it is using ULP. Failed insert should not have any effect on the ULP
state. This is a regression test.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220623091231.417138-1-jakub@cloudflare.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a copy and paste bug in lan743x_sgmii_config() so it checks
if (ret < 0) instead of if (mii_ctl < 0).
Fixes: 46b777ad9a ("net: lan743x: Add support to SGMII 1G and 2.5G")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/YrRry7K66BzKezl8@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
instead of flush_workqueue.
- Fix DM core's dm_io_complete to not return early if io error is
BLK_STS_AGAIN but bio polling is not in use.
- Fix DM core's dm_io_complete BLK_STS_DM_REQUEUE handling when dm_io
represents a split bio.
- Fix recent DM mirror log regression by clearing bits up to
BITS_PER_LONG boundary.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmK0uNIACgkQxSPxCi2d
A1rFyQf/ajvT4GfNFDfR+U53M8nARpEsIdqpMUlg2Kt+jgIEYK+NA2JfzFEfxy33
Xvh0gZtYZnreQJuKigb8g7ocbdhEdJgHhIZEyTYxG9fwDIoInpZuUFm6qW4w1zzq
Eix0oY3h+ORRaO+26UvfhQ7rLEF6c+HmsTg2+snssmJ/L6LGT4MCHvBQ3Ga+Mbve
jUimDNITm7Rn2iMZBHYOc2r5ApWhlt8w8U1kfnxF6deQsUHSDhFQGsgPT2KwRKqq
AufKGqEdnV+jcrxT2DfRIubI/3AOa6lAQMMT8dP9caQtVSZVo+ZdFLmthLIHvEM9
WM+wKGQ7ffyMQoA/kXPVshNLA2x4wQ==
=CnP/
-----END PGP SIGNATURE-----
Merge tag 'for-5.19/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM era to commit metadata during suspend using drain_workqueue
instead of flush_workqueue.
- Fix DM core's dm_io_complete to not return early if io error is
BLK_STS_AGAIN but bio polling is not in use.
- Fix DM core's dm_io_complete BLK_STS_DM_REQUEUE handling when dm_io
represents a split bio.
- Fix recent DM mirror log regression by clearing bits up to
BITS_PER_LONG boundary.
* tag 'for-5.19/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm mirror log: clear log bits up to BITS_PER_LONG boundary
dm: fix BLK_STS_DM_REQUEUE handling when dm_io represents split bio
dm: do not return early from dm_io_complete if BLK_STS_AGAIN without polling
dm era: commit metadata in postsuspend after worker stops
Only a single patch in this pull request, to fix tracing of command
completion. From Edward.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYrUdegAKCRDdoc3SxdoY
dkCzAP43hQS2nTqD6h6FiiqJS4CUATF2Dj11wZeQBNpByXiuLgD+JmO7W6o4soMn
wQmz9iTPCRA1WWvLBMSE5wucsyFhdQI=
=RzXR
-----END PGP SIGNATURE-----
Merge tag 'ata-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fix from Damien Le Moal:
- a single patch to fix tracing of command completion (Edward)
* tag 'ata-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata: add qc->flags in ata_qc_complete_template tracepoint
-----BEGIN PGP SIGNATURE-----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=3uDs
-----END PGP SIGNATURE-----
Merge tag 'block-5.19-2022-06-24' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Series fixing issues with sysfs locking and name reuse (Christoph)
- NVMe pull request via Christoph:
- Fix the mixed up CRIMS/CRWMS constants (Joel Granados)
- Add another broken identifier quirk (Leo Savernik)
- Fix up a quirk because Samsung reuses PCI IDs over different
products (Christoph Hellwig)
- Remove old WARN_ON() that doesn't apply anymore (Li)
- Fix for using a stale cached request value for rq-qos throttling
mechanisms that may schedule(), like iocost (me)
- Remove unused parameter to blk_independent_access_range() (Damien)
* tag 'block-5.19-2022-06-24' of git://git.kernel.dk/linux-block:
block: remove WARN_ON() from bd_link_disk_holder
nvme: move the Samsung X5 quirk entry to the core quirks
nvme: fix the CRIMS and CRWMS definitions to match the spec
nvme: add a bogus subsystem NQN quirk for Micron MTFDKBA2T0TFH
block: pop cached rq before potentially blocking rq_qos_throttle()
block: remove queue from struct blk_independent_access_range
block: freeze the queue earlier in del_gendisk
block: remove per-disk debugfs files in blk_unregister_queue
block: serialize all debugfs operations using q->debugfs_mutex
block: disable the elevator int del_gendisk
-----BEGIN PGP SIGNATURE-----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=Z57a
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.19-2022-06-24' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into the 5.19 release. All are fixing
issues that either happened in this release, or going to stable.
In detail:
- A small series of fixlets for the poll handling, all destined for
stable (Pavel)
- Fix a merge error from myself that caused a potential -EINVAL for
the recv/recvmsg flag setting (me)
- Fix a kbuf recycling issue for partial IO (me)
- Use the original request for the inflight tracking (me)
- Fix an issue introduced this merge window with trace points using a
custom decoder function, which won't work for perf (Dylan)"
* tag 'io_uring-5.19-2022-06-24' of git://git.kernel.dk/linux-block:
io_uring: use original request task for inflight tracking
io_uring: move io_uring_get_opcode out of TP_printk
io_uring: fix double poll leak on repolling
io_uring: fix wrong arm_poll error handling
io_uring: fail links when poll fails
io_uring: fix req->apoll_events
io_uring: fix merge error in checking send/recv addr2 flags
io_uring: mark reissue requests with REQ_F_PARTIAL_IO
-----BEGIN PGP SIGNATURE-----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=CmXV
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk kernel thread revert from Petr Mladek:
"Revert printk console kthreads.
The testing of 5.19 release candidates revealed issues that did not
happen when all consoles were serialized using the console semaphore.
More time is needed to check expectations of the existing console
drivers and be confident that they can be safely used in parallel"
* tag 'printk-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
Revert "printk: add functions to prefer direct printing"
Revert "printk: add kthread console printers"
Revert "printk: extend console_lock for per-console locking"
Revert "printk: remove @console_locked"
Revert "printk: Block console kthreads when direct printing will be required"
Revert "printk: Wait for the global console lock when the system is going down"
rpmsg_register_device_override need to call put_device to free vch when
driver_set_override fails.
Fix this by adding a put_device() to the error path.
Fixes: bb17d110cb ("rpmsg: Fix calling device_lock() on non-initialized device")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Link: https://lore.kernel.org/r/20220624024120.11576-1-hbh25y@gmail.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
In accordance with the Generic EHCI/OHCI bindings the corresponding node
name is suppose to comply with the Generic USB HCD DT schema, which
requires the USB nodes to have the name acceptable by the regexp:
"^usb(@.*)?" . Make sure the "generic-ehci" and "generic-ohci"-compatible
nodes are correctly named.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20220624141622.7149-3-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
complete_emulator_pio_in() only has to be called by
complete_sev_es_emulated_ins() now; therefore, all that the function does
now is adjust sev_pio_count and sev_pio_data. Which is the same for
both IN and OUT.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The parameter associated to the announce_create and
announce_destroy ops functions is not an endpoint but a rpmsg device.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Link: https://lore.kernel.org/r/20220425071723.774050-1-arnaud.pouliquen@foss.st.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Remove the unused timeout parameter from dlm_user_adopt_orphan().
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes warning messages that could be logged when
remote requests had been waiting on a reply message for some timeout
period (which could be set through configfs, but was rarely enabled.)
The improved midcomms layer now carefully tracks all messages and
replies, and logs much more useful messages if there is an actual
problem.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes some grammar output in lowcomms implementation by
removing the "successful" word which should be "successfully" but it
can never be unsuccessfully so we remove it.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch adds comments about the difference between the lower 2 bytes
of lkb flags and the 2 upper bytes of the lkb IFL flags. In short the
upper 2 bytes will be handled as internal flags whereas the lower 2
bytes are part of the DLM protocol and are used to exchange messages.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch cleans up the handling of recovery results by moving it from
ls_recover() to the caller do_ls_recovery(). This makes the error handling
clearer.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Make dlm_new_lockspace() wait until a full recovery completes
sucessfully or fails. Previously, dlm_new_lockspace() returned
to the caller after dlm_recover_members() finished, which is
only partially through recovery. The result of the previous
behavior is that the new lockspace would not be usable for some
time (especially with overlapping recoveries), and some errors
in the later part of recovery could not be returned to the caller.
Kernel callers gfs2 and cluster-md have their own wait handling to
wait for recovery to complete after calling dlm_new_lockspace().
This continues to work, but will be unnecessary.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
A lockspace can be "stopped" multiple times consecutively before
being "started" (when recoveries overlap.) In this case, the
lsop_recover_prep callback only needs to be called once when the
lockspace is first stopped, and not repeatedly for each stop.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>