Make clear that a particular recovery iteration must not be aborted
before membership changes are applied to the members list (ls_nodes)
and midcomms layer. Interrupting recovery before this can result
in missing node-specific changes in midcomms or through lsops.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Now all callers except emulator_pio_in_emulated are using
__emulator_pio_in/complete_emulator_pio_in explicitly.
Move the "either copy the result or attempt PIO" logic in
emulator_pio_in_emulated, and rename __emulator_pio_in to
just emulator_pio_in.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use __emulator_pio_in() directly for fast PIO instead of bouncing through
emulator_pio_in() now that __emulator_pio_in() fills "val" when handling
in-kernel PIO. vcpu->arch.pio.count is guaranteed to be '0', so this a
pure nop.
emulator_pio_in_emulated is now the last caller of emulator_pio_in.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make emulator_pio_in_out operate directly on the provided buffer
as long as PIO is handled inside KVM.
For input operations, this means that, in the case of in-kernel
PIO, __emulator_pio_in() does not have to be always followed
by complete_emulator_pio_in(). This affects emulator_pio_in() and
kvm_sev_es_ins(); for the latter, that is why the call moves from
advance_sev_es_emulated_ins() to complete_sev_es_emulated_ins().
For output, it means that vcpu->pio.count is never set unnecessarily
and there is no need to clear it; but also vcpu->pio.size must not
be used in kvm_sev_es_outs(), because it will not be updated for
in-kernel OUT.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For now, this is basically an excuse to add back the void* argument to
the function, while removing some knowledge of vcpu->arch.pio* from
its callers. The WARN that vcpu->arch.pio.count is zero is also
extended to OUT operations.
The vcpu->arch.pio* fields still need to be filled even when the PIO is
handled in-kernel as __emulator_pio_in() is always followed by
complete_emulator_pio_in(). But after fixing that, it will be possible to
to only populate the vcpu->arch.pio* fields on userspace exits.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM protects the device list with SRCU, and therefore different calls
to kvm_io_bus_read()/kvm_io_bus_write() can very well see different
incarnations of kvm->buses. If userspace unregisters a device while
vCPUs are running there is no well-defined result. This patch applies
a safe fallback by returning early from emulator_pio_in_out(). This
corresponds to returning zeroes from IN, and dropping the writes on
the floor for OUT.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The caller of kernel_pio already has arguments for most of what kernel_pio
fishes out of vcpu->arch.pio. This is the first step towards ensuring that
vcpu->arch.pio.* is only used when exiting to userspace.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds the resource name to dlm tracepoints. The name
usually comes through the lkb_resource, but in some cases a resource
may not yet be associated with an lkb, in which case the name and
namelen parameters are used.
It should be okay to access the lkb_resource and the res_name field at
the time when the tracepoint is invoked. The resource is assigned to a
lkb and it's reference is being held during the tracepoint call. During
this time the resource cannot be freed. Also a lkb will never switch
its assigned resource. The name of a dlm_rsb is assigned at creation
time and should never be changed during runtime as well.
The TP_printk() call uses always a hexadecimal string array
representation for the resource name (which is not necessarily ascii.)
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch removes a dereference of lksb of lkb when calling ast
tracepoint. First it reduces additional overhead, even if traces
are not active. Second we can deference it in TP_fast_assign from
the existing lkb parameter.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Use complete_emulator_pio_in() directly when completing fast PIO, there's
no need to bounce through emulator_pio_in(): the comment about ECX
changing doesn't apply to fast PIO, which isn't used for string I/O.
No functional change intended.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch moves the trace calls for ast and bast to before the
ast and bast callback functions are called rather than after.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch changes the handling of a plock operation that was interrupted
while waiting for a user space reply from dlm_controld. (This is not
the lock blocking state, i.e. locks_lock_file_wait().)
Currently, when an op is interrupted while waiting on user space, the
op is removed. When the user space result later arrives, a kernel
message is loggged: "dev_write no op...". This can be seen from a test
such as "stress-ng --fcntl 100" and interrupting it with ctrl-c.
Now, leave the op in place when interrupted and remove it when the
result arrives (the result will be ignored.) With this change, the
logged message is not expected to appear, and would indicate a bug.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch refactors do_unlock_close() by using only struct dlm_plock_info
as a parameter.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
- Avoid toggling the x2apic msr interception if it is already up to date.
- Avoid touching L0 msr bitmap when AVIC is inhibited on entry to
the guest mode, because in this case the guest usually uses its
own msr bitmap.
Later on VM exit, the 1st optimization will allow KVM to skip
touching the L0 msr bitmap as well.
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220519102709.24125-18-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a tracepoint to track number of doorbells being sent
to signal a running vCPU to process IRQ after being injected.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-17-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch reverses the commit bcfad4265c ("dlm: improve plock logging
if interrupted") by moving it to debug level and notifying the user an op
was removed.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
For x2AVIC, the index from incomplete IPI #vmexit info is invalid
for logical cluster mode. Only ICRH/ICRL values can be used
to determine the IPI destination APIC ID.
Since QEMU defines guest physical APIC ID to be the same as
vCPU ID, it can be used to quickly identify the target vCPU to deliver IPI,
and avoid the overhead from searching through all vCPUs to match the target
vCPU.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-16-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When launching a VM with x2APIC and specify more than 255 vCPUs,
the guest kernel can disable x2APIC (e.g. specify nox2apic kernel option).
The VM fallbacks to xAPIC mode, and disable the vCPU ID 255 and greater.
In this case, APICV is deactivated for the disabled vCPUs.
However, the current APICv consistency warning does not account for
this case, which results in a warning.
Therefore, modify warning logic to report only when vCPU APIC mode
is valid.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-15-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently, AVIC is inhibited when booting a VM w/ x2APIC support.
because AVIC cannot virtualize x2APIC MSR register accesses.
However, the AVIC doorbell can be used to accelerate interrupt
injection into a running vCPU, while all guest accesses to x2APIC MSRs
will be intercepted and emulated by KVM.
With hybrid-AVIC support, the APICV_INHIBIT_REASON_X2APIC is
no longer enforced.
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-14-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Originalliy, this WARN_ON is designed to detect when calling
avic_vcpu_load() on an already running vcpu in AVIC mode (i.e. the AVIC
is_running bit is set).
However, for x2AVIC, the vCPU can switch from xAPIC to x2APIC mode while in
running state, in which the avic_vcpu_load() will be called from
svm_refresh_apicv_exec_ctrl().
Therefore, remove this warning since it is no longer appropriate.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-13-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce logic to (de)activate AVIC, which also allows
switching between AVIC to x2AVIC mode at runtime.
When an AVIC-enabled guest switches from APIC to x2APIC mode,
the SVM driver needs to perform the following steps:
1. Set the x2APIC mode bit for AVIC in VMCB along with the maximum
APIC ID support for each mode accodingly.
2. Disable x2APIC MSRs interception in order to allow the hardware
to virtualize x2APIC MSRs accesses.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-12-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As a preparation for x2avic, this patch ensures that x2apic msrs
are always intercepted for the nested guest.
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20220519102709.24125-11-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AMD AVIC can support xAPIC and x2APIC virtualization,
which requires changing x2APIC bit VMCB and MSR intercepton
for x2APIC MSRs. Therefore, call avic_refresh_apicv_exec_ctrl()
to refresh configuration accordingly.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-10-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All interconnect device tree nodes on sm8450 are 2-cells, however in
UFS node they are handled as 1-cells, fix it.
Fixes: aa2d0bf04a ("arm64: dts: qcom: sm8450: add interconnect nodes")
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220310221934.1560729-1-vladimir.zapolskiy@linaro.org
APICv should be deactivated on vCPU that has APIC disabled.
Therefore, call kvm_vcpu_update_apicv() when changing
APIC mode, and add additional check for APIC disable mode
when determine APICV activation,
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-9-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When enabling x2APIC virtualization (x2AVIC), the interception of
x2APIC MSRs must be disabled to let the hardware virtualize guest
MSR accesses.
Current implementation keeps track of list of MSR interception state
in the svm_direct_access_msrs array. Therefore, extends the array to
include x2APIC MSRs.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-8-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In X2APIC mode, the Logical Destination Register is read-only,
which provides a fixed mapping between the logical and physical
APIC IDs. Therefore, there is no Logical APIC ID table in X2AVIC
and the processor uses the X2APIC ID in the backing page to create
a vCPU’s logical ID.
In addition, KVM does not support updating APIC ID in x2APIC mode,
which means AVIC does not need to handle this case.
Therefore, check x2APIC mode when handling physical and logical
APIC ID update, and when invalidating logical APIC ID table.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-7-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
xAVIC and x2AVIC modes can support diffferent number of vcpus.
Update existing logics to support each mode accordingly.
Also, modify the maximum physical APIC ID for AVIC to 255 to reflect
the actual value supported by the architecture.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-5-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add CPUID check for the x2APIC virtualization (x2AVIC) feature.
If available, the SVM driver can support both AVIC and x2AVIC modes
when load the kvm_amd driver with avic=1. The operating mode will be
determined at runtime depending on the guest APIC mode.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <20220519102709.24125-4-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Introduce a new feature bit for virtualized x2APIC (x2AVIC) in
CPUID_Fn8000000A_EDX [SVM Revision and Feature Identification].
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220519102709.24125-2-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a new debugfs file to expose the pid of each vcpu threads. This
is very helpful for userland tools to get the vcpu pids without
worrying about thread naming conventions of the VMM.
Signed-off-by: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Message-Id: <20220523190327.2658-1-vineeth@bitbyteword.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
IBS support has been enhanced with two new features in upcoming uarch:
1. DataSrc extension
2. L3 miss filtering.
Additional set of bits has been introduced in IBS registers to exploit
these features.
New bits are already defining in arch/x86/ header. Sync it with tools
header file. Also rename existing ibs_op_data field 'data_src' to
'data_src_lo'.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: like.xu.linux@gmail.com
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20220604044519.594-8-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
PMUs advertise their capabilities via sysfs attribute files but
the perf tool currently parses only core(CPU) or hybrid core PMU
capabilities. Add support of recording non-core PMU capabilities
int perf.data header.
Note that a newly proposed HEADER_PMU_CAPS is replacing existing
HEADER_HYBRID_CPU_PMU_CAPS. Special care is taken for hybrid core
PMUs by writing their capabilities first in the perf.data header
to make sure new perf.data file being read by old perf tool does
not break.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: like.xu.linux@gmail.com
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20220604044519.594-6-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently all capabilities are stored in a single string separated by
NULL character. Instead, store them in an array which makes searching of
capability easier.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: like.xu.linux@gmail.com
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20220604044519.594-5-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid unnecessary conditional code to check if pmu name is NULL
or not by passing "cpu" pmu name to the printing function.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: like.xu.linux@gmail.com
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20220604044519.594-4-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to returning nr_caps, cache it locally in struct perf_pmu.
Similarly, cache status of whether caps sysfs has already been parsed
or not. These will help to avoid parsing sysfs every time the function
gets called.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: like.xu.linux@gmail.com
Cc: x86@kernel.org
Link: https://lore.kernel.org/r/20220604044519.594-3-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Samples without an L3 miss are discarded and counter is reset with
random value (between 1-15 for fetch PMU and 1-127 for op PMU) when IBS
L3 miss filtering is enabled. This causes a sampling period skew but
there is no way to reconstruct aggregated sampling period. So print a
warning at perf record if user sets l3missonly=1.
Ex:
# perf record -c 10000 -C 0 -e ibs_op/l3missonly=1/
WARNING: Hw internally resets sampling period when L3 Miss Filtering is enabled
and tagged operation does not cause L3 Miss. This causes sampling period skew.
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <rrichter@amd.com>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: like.xu.linux@gmail.com
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20220604044519.594-2-ravi.bangoria@amd.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We no longer need to call into the kernel to map the FDT before calling
into the kernel so let's drop the helpers we added for this.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-22-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Currently, when KASLR is in effect, we set up the kernel virtual address
space twice: the first time, the KASLR seed is looked up in the device
tree, and the kernel virtual mapping is torn down and recreated again,
after which the relocations are applied a second time. The latter step
means that statically initialized global pointer variables will be reset
to their initial values, and to ensure that BSS variables are not set to
values based on the initial translation, they are cleared again as well.
All of this is needed because we need the command line (taken from the
DT) to tell us whether or not to randomize the virtual address space
before entering the kernel proper. However, this code has expanded
little by little and now creates global state unrelated to the virtual
randomization of the kernel before the mapping is torn down and set up
again, and the BSS cleared for a second time. This has created some
issues in the past, and it would be better to avoid this little dance if
possible.
So instead, let's use the temporary mapping of the device tree, and
execute the bare minimum of code to decide whether or not KASLR should
be enabled, and what the seed is. Only then, create the virtual kernel
mapping, clear BSS, etc and proceed as normal. This avoids the issues
around inconsistent global state due to BSS being cleared twice, and is
generally more maintainable, as it permits us to defer all the remaining
DT parsing and KASLR initialization to a later time.
This means the relocation fixup code runs only a single time as well,
allowing us to simplify the RELR handling code too, which is not
idempotent and was therefore required to keep track of the offset that
was applied the first time around.
Note that this means we have to clone a pair of FDT library objects, so
that we can control how they are built - we need the stack protector
and other instrumentation disabled so that the code can tolerate being
called this early. Note that only the kernel page tables and the
temporary stack are mapped read-write at this point, which ensures that
the early code does not modify any global state inadvertently.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-21-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The early KASLR init code runs extremely early, and anything that could
be deferred until later should be. So let's defer the randomization of
the module region until much later - this also simplifies the
arithmetic, given that we no longer have to reason about the link time
vs load time placement of the core kernel explicitly. Also get rid of
the global status variable, and infer the status reported by the
diagnostic print from other KASLR related context.
While at it, get rid of the special case for KASAN without
KASAN_VMALLOC, which never occurs in practice.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-20-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
In order to avoid having to touch memory with the MMU and caches
disabled, and therefore having to invalidate it from the caches
explicitly, just defer storing the value until after the MMU has been
turned on, unless we are giving up with an error.
While at it, move the associated variable definitions into C code.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-19-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Now that we can access the entire kernel image via the ID map, we can
execute the page table population code with the MMU and caches enabled.
The only thing we need to ensure is that translations via TTBR1 remain
disabled while we are updating the page tables the second time around,
in case KASLR wants them to be randomized.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-18-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Create a macro load_ttbr1 to avoid having to repeat the same instruction
sequence 3 times in a subsequent patch. No functional change intended.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-17-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Instead of calling into the kernel to map the FDT into the kernel page
tables before even calling start_kernel(), let's switch to the initial,
temporary mapping of the device tree that has been added to the ID map.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-16-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
We need to access the DT very early to get at the command line and the
KASLR seed, which currently means we rely on some hacks to call into the
kernel before really calling into the kernel, which is undesirable.
So instead, let's create a mapping for the FDT in the initial ID map,
which is feasible now that it has been extended to cover more than a
single page or block, and can be updated in place to remap other output
addresses.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-15-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Formerly, we had to access the RELA and RELR tables via the kernel
mapping that was being relocated, and so deriving the start and end
addresses using ADRP/ADD references was not possible, as the relocation
code runs from the ID map.
Now that we map the entire kernel image via the ID map, we can simplify
this, and just load the entries via the ID map as well.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-14-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
As a first step towards avoiding the need to create, tear down and
recreate the kernel virtual mapping with MMU and caches disabled, start
by expanding the ID map so it covers the page tables as well as all
executable code. This will allow us to populate the page tables with the
MMU and caches on, and call KASLR init code before setting up the
virtual mapping.
Since this ID map is only needed at boot, create it as a temporary set
of page tables, and populate the permanent ID map after enabling the MMU
and caches. While at it, switch to read-only attributes for the where
possible, as writable permissions are only needed for the initial kernel
page tables. Note that on 4k granule configurations, the permanent ID
map will now be reduced to a single page rather than a 2M block mapping.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220624150651.1358849-13-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>