We don't know how to do coherence setup on ISA before MIPS
Release 1.
As CPS support only servers simulation purpose on those cores,
and simulators are always coherent, just disable initialization
code and provide user a warning in case coherence is not setup
properly.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
bcache is not tied to CPU's cache interface. Just move those
declaration to cache.c so it can be avaialble to CPU with all
cache types.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Wait for VPU to be idle in ivpu_pm_suspend_cb() before powering off
the device, so jobs are not lost and TDRs are not triggered after
resume.
Fixes: 852be13f3b ("accel/ivpu: Add PM support")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331113603.2802515-3-stanislaw.gruszka@linux.intel.com
Currently job->done_fence is added to every BO handle within a job. If job
handle (command buffer) is shared between multiple submits, KMD will add
the fence in each of them. Then bo_wait_ioctl() executed on command buffer
will exit only when all jobs containing that handle are done.
This creates deadlock scenario for user mode driver in case when job handle
is added as dependency of another job, because bo_wait_ioctl() of first job
will wait until second job finishes, and second job can not finish before
first one.
Having fences added only to job buffer handle allows user space to execute
bo_wait_ioctl() on the job even if it's handle is submitted with other job.
Fixes: cd7272215c ("accel/ivpu: Add command buffer submission logic")
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331113603.2802515-2-stanislaw.gruszka@linux.intel.com
VPU on MTL has hardware optimizations and does not require 10ms
D0 - D3hot transition delay imposed by PCI specification (PCIe
r6.0, sec 5.9.) .
The delay removal is traditionally done by adding PCI ID to
quirk_remove_d3hot_delay() in drivers/pci/quirks.c . But since
we do not need that optimization before driver probe and we
can better specify in the ivpu driver on what (future) hardware
use the optimization, we do not use quirk_remove_d3hot_delay()
for that.
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403121545.2995279-1-stanislaw.gruszka@linux.intel.com
The Lenovo Thinkpad X13s has a WCN6855 Bluetooth controller on uart2,
add this.
Signed-off-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230326233812.28058-5-steev@kali.org
Set line names for GPIO lines exposed by PMICs on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-16-brgl@bgdev.pl
Add GPIO controller nodes to PMICs that have the GPIO hooked up on
sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-15-brgl@bgdev.pl
Add the thermal zones and associated alarm nodes for the PMICs that have
them hooked up on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-12-brgl@bgdev.pl
Add the power key node under the PON node for PMIC #0 on sa8775p.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-10-brgl@bgdev.pl
Add a new .dtsi file for sa8775p PMICs and add the four PMICs interfaced
to the SoC via SPMI. Enable the PMICs for sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-8-brgl@bgdev.pl
Sort all children of the soc node by the first address in their reg
property. This was mostly already the case but there were some nodes
that didn't follow it so fix it now for consistency.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-3-brgl@bgdev.pl
The file has inconsistent padding of the address part of soc node
children's reg properties. Fix it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327125316.210812-2-brgl@bgdev.pl
The pmk8280 PMIC PON peripheral is gen3 and uses two sets of registers;
hlos and pbs.
This specifically fixes the following error message during boot when the
pbs registers are not defined:
PON_PBS address missing, can't read HW debounce time
Note that this also enables the spurious interrupt workaround introduced
by commit 0b65118e6b ("Input: pm8941-pwrkey - add software key press
debouncing support") (which may or may not be needed).
Fixes: ccd3517faf ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org> #Thinkpad X13s
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230327122948.4323-1-johan+linaro@kernel.org
The bindings expect second Soundwire interrupt to be "wakeup" (Linux
driver takes by index):
sc8280xp-crd.dtb: soundwire-controller@3330000: interrupt-names:1: 'wakeup' was expected
Fixes: c18773d162 ("arm64: dts: qcom: sc8280xp: add SoundWire and LPASS")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230403132328.61414-1-krzysztof.kozlowski@linaro.org
Add the properties to ensure the ever so delicate touchscreen setup
matches downstream.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-tama_disp-v3-3-2b1567c039d7@linaro.org
Add required pins and RMI4 node to the common DT and remove it
from Akatsuki, as it uses a different touch.
Since the panels are super high tech proprietary incell, they
need to be handled with very precise timings. As such the panel
driver sets up the power rails and GPIOs and the touchscreen
driver *has to* probe afterwards.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-tama_disp-v3-2-2b1567c039d7@linaro.org
Add required nodes to support display on XZ2/XZ2c. XZ3 has a
different power rail setup and needs to be handled separately.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230313-topic-tama_disp-v3-1-2b1567c039d7@linaro.org
Follow other dtses and pad regs to 8 digits.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230325112852.18841-4-a39.skl@gmail.com
Property phy_mode according to binding checker does not exist,
drop it.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230325112852.18841-3-a39.skl@gmail.com
Provide clocks from dsi_phy to gcc, this will make
sure we don't fallback to global name lookup.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230325112852.18841-2-a39.skl@gmail.com
Assign RPM_SMD_XO_CLK_SRC from rpmcc in place
of fixed-clock where possible.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230325112852.18841-1-a39.skl@gmail.com
Both configs were already applied by 2 separate changes,
fix this to avoid:
arch/arm64/configs/defconfig:989:warning: override: reassigning to symbol TYPEC_UCSI
arch/arm64/configs/defconfig:1232:warning: override: reassigning to symbol QCOM_PMIC_GLINK
Fixes: 4ffd0b0019 ("arm64: defconfig: add PMIC GLINK modules")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230324-topic-sm8450-upstream-defconfig-fixup-v1-1-2d75cc9b3c3d@linaro.org
Fixes the following DT bindings check error:
domain-idle-states: cluster-sleep-0: 'idle-state-name', 'local-timer-stop' do not match any of the regexes:
'pinctrl-[0-9]+'
domain-idle-states: cluster-sleep-1: 'idle-state-name', 'local-timer-stop' do not match any of the regexes:
'pinctrl-[0-9]+'
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230323-topic-sm8450-upstream-dt-bindings-fixes-v2-2-0ca1bea1a843@linaro.org
