Do not generate the HS front and back porch gaps, the HSA gap and
EOT packet, as per "SN65DSI83 datasheet SLLSEC1I - SEPTEMBER 2012
- REVISED OCTOBER 2020", page 22, these packets are not required.
This makes the TI SN65DSI83 bridge work with Samsung DSIM on i.MX8MN.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230403190242.224490-1-marex@denx.de
Liam recommends using mas_walk() instead of mas_find() for our use case so
let's do that, it avoids some minor overhead associated with being able to
restart the operation which we don't need since we do a simple search.
Suggested-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230403-regmap-maple-walk-fine-v2-1-c07371c8a867@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the AK4458 audio DAC bindings to DT schema.
Signed-off-by: Saalim Quadri <danascape@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230328091831.55690-1-danascape@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With PCI if the device was suspended it is brought back to full
power and then suspended again.
This doesn't happen when device is described via DT.
We need to make sure that we tear down pipelines only if the device
was previously active (thus the pipelines were setup).
Otherwise, we can break the use_count:
[ 219.009743] sof-audio-of-imx8m 3b6e8000.dsp:
sof_ipc3_tear_down_all_pipelines: widget PIPELINE.2.SAI3.IN is still in use: count -1
and after this everything stops working.
Fixes: d185e0689a ("ASoC: SOF: pm: Always tear down pipelines before DSP suspend")
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://lore.kernel.org/r/20230405092655.19587-1-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There may be a disconnect between the GT used by the engine and the GT
used for the VM, requiring us to hold a wakeref on both while the GPU is
active with this request.
v2: added explanation to __queue_and_release_pm
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[ahajda: removed not-yet-upstremed wakeref tracking bits]
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330-hold_wakeref_for_active_vm-v2-1-724d201499c2@intel.com
Since Linux-6.3, LoongArch supports PIE kernel now, so let's reintroduce
efi_relocate_kernel() to relocate the core kernel.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Merge the mmc fixes for v6.3-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.4.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When calling dev_set_name() memory is allocated for the name for the
struct device. Once that structure device is registered, or attempted
to be registerd, with the driver core, the driver core will handle
cleaning up that memory when the device is removed from the system.
Unfortunatly for the memstick code, there is an error path that causes
the struct device to never be registered, and so the memory allocated in
dev_set_name will be leaked. Fix that leak by manually freeing it right
before the memory for the device is freed.
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: linux-mmc@vger.kernel.org
Fixes: 0252c3b4f0 ("memstick: struct device - replace bus_id with dev_name(), dev_set_name()")
Cc: stable <stable@kernel.org>
Co-developed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Co-developed-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/r/20230401200327.16800-1-gregkh@linuxfoundation.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Enabling kernel-doc warnings in commit aaee4bbe8a ("drm/i915: enable
kernel-doc warnings for CONFIG_DRM_I915_WERROR=y") actually only covers
the .c files. And it's good for avoiding warnings in W= builds. However,
we need something more to check for kernel-doc issues in headers. Add it
as part of the existing HDRTEST.
We have tons of issues, and this unleashes warnings galore on
CONFIG_DRM_I915_WERROR=y. It doesn't fail the build because (at least
for now) we don't pass -Werror to kernel-doc.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404090528.173075-1-jani.nikula@intel.com
drm/i915 fixes for v6.3-rc6:
- Fix DP MST DSC M/N calculation to use compressed bpp
- Fix racy use-after-free in perf ioctl
- Fix context runtime accounting
- Fix handling of GT reset during HuC loading
- Fix use of unsigned vm_fault_t for error values
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87zg7mzomz.fsf@intel.com
The LDB driver currently checks whether dual mode is used, otherwise it
assumes only channel 0 is in use. Add support for using only channel 1. In
device tree terms, this means linking port 2 only.
Doing this cleanly requires changing the logic of the probe functions from
this:
1. use of_graph_get_remote_node() on port 1 to find the panel
2. use drm_of_lvds_get_dual_link_pixel_order() to detect dual mode
to this:
1. use of_graph_get_remote_node() twice to find remote ports
2. reuse the result of the above to know whether each channel is enabled
and to find the panel
3. if (both channels as enabled)
use drm_of_lvds_get_dual_link_pixel_order() to detect dual mode
Also add a dev_dbg() to log the detected mode and log an error in case no
panel was found (no channel enabled).
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230405081058.2347130-2-luca.ceresoli@bootlin.com
In the j1939_tp_tx_dat_new() function, an out-of-bounds memory access
could occur during the memcpy() operation if the size of skb->cb is
larger than the size of struct j1939_sk_buff_cb. This is because the
memcpy() operation uses the size of skb->cb, leading to a read beyond
the struct j1939_sk_buff_cb.
Updated the memcpy() operation to use the size of struct
j1939_sk_buff_cb instead of the size of skb->cb. This ensures that the
memcpy() operation only reads the memory within the bounds of struct
j1939_sk_buff_cb, preventing out-of-bounds memory access.
Additionally, add a BUILD_BUG_ON() to check that the size of skb->cb
is greater than or equal to the size of struct j1939_sk_buff_cb. This
ensures that the skb->cb buffer is large enough to hold the
j1939_sk_buff_cb structure.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Reported-by: Shuangpeng Bai <sjb7183@psu.edu>
Tested-by: Shuangpeng Bai <sjb7183@psu.edu>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://groups.google.com/g/syzkaller/c/G_LL-C3plRs/m/-8xCi6dCAgAJ
Link: https://lore.kernel.org/all/20230404073128.3173900-1-o.rempel@pengutronix.de
Cc: stable@vger.kernel.org
[mkl: rephrase commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
There might be cases where the host attach is deferred, use dev_err_probe
to add more detailed information to /sys/kernel/debug/devices_deferred.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230405075223.579461-1-alexander.stein@ew.tq-group.com
Extend the SCMI transport layer to support mailbox controllers that expose
communication channels that are unidirectional by nature.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20230404115026.2828149-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI defines two kinds of communication channels between the agent and the
platform: one bidirectional 'a2p' channel used by the agent to send SCMI
commands and synchronously receive the related replies, and an optional
'p2a' unidirectional channel used to asynchronously receive delayed
responses and notifications emitted from the platform.
When configuring an SCMI transport based on mailboxes, the current binding
supports only mailboxes providing bidirectional channels: in such a case
one mailbox channel can be easily assigned to each SCMI channel as above
described.
In case, instead, to have to deal with mailboxes providing only distinct
unidirectional channels, it becomes necessary to extend the binding in
order to be able to bind 2 distinct unidirectional mailbox channels to the
same SCMI 'a2p' channel.
Bidirectional and unidirectional channels support for the SCMI mailbox
transport can coexist by carefully considering the effective combination
of defined 'mboxes' and 'shmem' descriptors.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230404115026.2828149-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
BWMONv4 has two sets of registers: one for handling the monitor itself
and one called "global" which hosts some sort of a headswitch and an
interrupt control register. We did not handle that one before, as on
SoCs starting with SDM845 they have been merged into a single contiguous
range.
To make the qcom,msm8998-bwmon less confusing and in preparation for
actual MSM8998 support, describe the global register space and introduce
new "qcom,sdm845-cpu-bwmon" compatible while keeping the
"qcom,sdm845-bwmon" as a fallback for SoCs with this merged register space
scheme.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230304-topic-ddr_bwmon-v3-1-77a050c2fbda@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
SM6375 includes a CPUCP block responsible for managing different APSS-
related tasks, such as scaling the voltage and frequency of the
components within the ARM DSU cluster. Add a compatible for the L3 cache
DVFS scaler within.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230303-topic-sm6375_features0_dts-v2-2-708b8191f7eb@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Sort the kerneldoc entries the same way the struct members are
sorted.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v7-3-815606092fff@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Some nodes, like EBI0 (DDR) or L3/LLCC, may be connected over more than
one channel. This should be taken into account in bandwidth calcualtion,
as we're supposed to feed msmbus with the per-channel bandwidth. Add
support for specifying that and use it during bandwidth aggregation.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v7-2-815606092fff@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Currently NOC_QOS_MODE_FIXED is defined as 0x0 which makes it the
default option (partial struct initialization). The default option
however should be NOC_QOS_MODE_INVALID.
That results in bogus QoS configurations being sent for port 0 (which
is used for the DRAM endpoint on BIMC, for example) coming from all nodes
with .qos.ap_owned = true and uninitialized .qos.qos_mode. It's also an
issue for newer SoCs where all nodes are treated as if they were ap_owned,
but not all of them have QoS configuration.
The NOC_QOS_MODEs are defined as preprocessor constants and are not used
anywhere outside qcom_icc_set_noc_qos(), which is easily worked around.
Separate the desc->type values from the values sent to msmbus in the
aforementioned function. Make the former an enum for better mainainability.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v7-1-815606092fff@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Any power domain would already have been attached by the platform bus
code so drop the bogus power domain attach which always succeeds from
probe.
This effectively reverts commit 7de109c0ab ("interconnect: icc-rpm:
Add support for bus power domain").
Fixes: 7de109c0ab ("interconnect: icc-rpm: Add support for bus power domain")
Cc: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # MSM8996 Sony Kagura
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230313084953.24088-3-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Now that the link array is deallocated when destroying nodes and the
explicit link removal has been dropped from the exynos driver there are
no further users of and no need for the icc_link_destroy() interface.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-24-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The removed function declaration is a leftover of the old gphy firmware
loader, that has been removed in d5103604f7.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When building with clang's integrated assembler, it points out that the
CONFIG_CPU_HAS_DIEI versions of local_irq_enable and local_irq_disable
have a named parameter that is not used in the body of the macro and it
thinks that $8 is a positional parameter, rather than a register:
arch/mips/include/asm/asmmacro.h:48:2: warning: macro defined with named parameters which are not used in macro body, possible positional parameter found in body which will have no effect
.macro local_irq_enable reg=$8
^
The comment above the function that performs this check in LLVM notes
that the warning may trigger in this case, even though it is not
problematic. It is easy enough to clean this up by just omitting the
named parameter for this version of the macro, as it is entirely unused.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1415
Link: 81c944cadb
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
According to spec, we should check if output_bpp * pixel_rate is less
than DDI clock * 72, if UHBR is used.
v2: - s/pipe_config/crtc_state/ (Jani Nikula)
- Merged previous patch into that one, to remove empty function(Jani Nikula)
v3: - Make that constraint check to be DSC-related only
- Limit this to only DISPLAY_VER <= 13
v4: - Move constraint check to the top(Vinod Govindapillai)
HSDES: 1406899791
BSPEC: 49259
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230324135125.6720-1-stanislav.lisovskiy@intel.com
PSI offers 2 mechanisms to get information about a specific resource
pressure. One is reading from /proc/pressure/<resource>, which gives
average pressures aggregated every 2s. The other is creating a pollable
fd for a specific resource and cgroup.
The trigger creation requires CAP_SYS_RESOURCE, and gives the
possibility to pick specific time window and threshold, spawing an RT
thread to aggregate the data.
Systemd would like to provide containers the option to monitor pressure
on their own cgroup and sub-cgroups. For example, if systemd launches a
container that itself then launches services, the container should have
the ability to poll() for pressure in individual services. But neither
the container nor the services are privileged.
This patch implements a mechanism to allow unprivileged users to create
pressure triggers. The difference with privileged triggers creation is
that unprivileged ones must have a time window that's a multiple of 2s.
This is so that we can avoid unrestricted spawning of rt threads, and
use instead the same aggregation mechanism done for the averages, which
runs independently of any triggers.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20230330105418.77061-5-cerasuolodomenico@gmail.com
This change moves update_total flag out of update_triggers function,
currently called only in psi_poll_work.
In the next patch, update_triggers will be called also in psi_avgs_work,
but the total update information is specific to psi_poll_work.
Returning update_total value to the caller let us avoid differentiating
the implementation of update_triggers for different aggregators.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20230330105418.77061-4-cerasuolodomenico@gmail.com
Renaming in PSI implementation to make a clear distinction between
privileged and unprivileged triggers code to be implemented in the
next patch.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20230330105418.77061-3-cerasuolodomenico@gmail.com
Move a few functions up in the file to avoid forward declaration needed
in the patch implementing unprivileged PSI triggers.
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20230330105418.77061-2-cerasuolodomenico@gmail.com
There are scenarios where non-affine wakeups are incorrectly counted as
affine wakeups by schedstats.
When wake_affine_idle() returns prev_cpu which doesn't equal to
nr_cpumask_bits, it will slip through the check: target == nr_cpumask_bits
in wake_affine() and be counted as if target == this_cpu in schedstats.
Replace target == nr_cpumask_bits with target != this_cpu to make sure
affine wakeups are accurately tallied.
Fixes: 806486c377 (sched/fair: Do not migrate if the prev_cpu is idle)
Suggested-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Libo Chen <libo.chen@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Link: https://lore.kernel.org/r/20220810223313.386614-1-libo.chen@oracle.com
The same task check in perf_event_set_output has some potential issues
for some usages.
For the current perf code, there is a problem if using of
perf_event_open() to have multiple samples getting into the same mmap’d
memory when they are both attached to the same process.
https://lore.kernel.org/all/92645262-D319-4068-9C44-2409EF44888E@gmail.com/
Because the event->ctx is not ready when the perf_event_set_output() is
invoked in the perf_event_open().
Besides the above issue, before the commit bd27568117 ("perf: Rewrite
core context handling"), perf record can errors out when sampling with
a hardware event and a software event as below.
$ perf record -e cycles,dummy --per-thread ls
failed to mmap with 22 (Invalid argument)
That's because that prior to the commit a hardware event and a software
event are from different task context.
The problem should be a long time issue since commit c3f00c7027
("perk: Separate find_get_context() from event initialization").
The task struct is stored in the event->hw.target for each per-thread
event. It is a more reliable way to determine whether two events are
attached to the same task.
The event->hw.target was also introduced several years ago by the
commit 50f16a8bf9 ("perf: Remove type specific target pointers"). It
can not only be used to fix the issue with the current code, but also
back port to fix the issues with an older kernel.
Note: The event->hw.target was introduced later than commit
c3f00c7027. The patch may cannot be applied between the commit
c3f00c7027 and commit 50f16a8bf9. Anybody that wants to back-port
this at that period may have to find other solutions.
Fixes: c3f00c7027 ("perf: Separate find_get_context() from event initialization")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Link: https://lkml.kernel.org/r/20230322202449.512091-1-kan.liang@linux.intel.com
Thomas reported that offlining CPUs spends a lot of time in
synchronize_rcu() as called from perf_pmu_migrate_context() even though
he's not actually using uncore events.
Turns out, the thing is unconditionally waiting for RCU, even if there's
no actual events to migrate.
Fixes: 0cda4c0231 ("perf: Introduce perf_pmu_migrate_context()")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lkml.kernel.org/r/20230403090858.GT4253@hirez.programming.kicks-ass.net
Just like on Exynos5250, Exynos5420 and Exynos5433 the MIPI phy is
actually part of the Power Management Unit system controller thus allow
it as PMU's child.
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230207192851.549242-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Enable extra CPUs that may be supported by virt board, including
R4x00 (R4000 in QEMU), Cavium Octeon (Octeon68XX in QEMU), loongson2e,
loongson2f.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
QEMU can't emulate CVMSEG on generic platform for now.
Just disable it by default.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
ARCH_HAS_PHYS_TO_DMA and GPIOLIB are all platform level features
they shouldn't be selected with CPU.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Arch cflags should be independent to Platform.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Don't include cvmseg states into thread_status when
CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE is not defined or 0.
Fix compile for kernel without this feature.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Currently c-octeon relies on octeon's own smp function to flush
I-Cache. However this function is not available on generic platform.
Just use smp_call_function_many on generic platform.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
cpu_has_octeon_cache was tied to 0 for generic cpu-features,
whith this generic kernel built for octeon CPU won't boot.
Just enable this flag by cpu_type. It won't hurt orther platforms
because compiler will eliminate the code path on other processors.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Octeon has a different cache interface with traditional R4K one,
just opt-out this flag for octeon to avoid run R4K cache initialization
code accidentally.
Also remove ISA level assumption for 4k cache.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
