The rtl8188eu_inirp_init returns 0 for success or a negative error code.
Handle this return value in the two places where rtl8188eu_inirp_init is
called.
Suggested-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230206201800.139195-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the intf_start pointer that points to a media-specific start
function (pci, usb, sdio, ...). The r8188eu driver supports only usb.
We could call usb_intf_start directly instead of going through the
function pointer. usb_intf_start is just a call to rtl8188eu_inirp_init so
we can directly replace the intf_start pointer with rtl8188eu_inirp_init.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230206201800.139195-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the driver-specific _SUCCESS and _FAIL error codes in
rtl8188eu_inirp_init. Return 0 for success or a negative error
code as we do elsewhere in the kernel.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230206201800.139195-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the driver-specific _SUCCESS and _FAIL error codes in
rtw_read_port. Return 0 for success or a negative error code as
we do elsewhere in the kernel.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230206201800.139195-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtw_read_port function needs a struct recv_buf for preparing the usb
transfer.
Replace its u8 *rmem parameter with a struct recv_buf pointer to avoid
casts in the caller and in rtw_read_port.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Link: https://lore.kernel.org/r/20230206201800.139195-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use actual CPU number instead of hardcoded value to decide the size
of 'cpu_used_mask' in 'struct sw_flow'. Below is the reason.
'struct cpumask cpu_used_mask' is embedded in struct sw_flow.
Its size is hardcoded to CONFIG_NR_CPUS bits, which can be
8192 by default, it costs memory and slows down ovs_flow_alloc.
To address this:
Redefine cpu_used_mask to pointer.
Append cpumask_size() bytes after 'stat' to hold cpumask.
Initialization cpu_used_mask right after stats_last_writer.
APIs like cpumask_next and cpumask_set_cpu never access bits
beyond cpu count, cpumask_size() bytes of memory is enough.
Signed-off-by: Eddy Tao <taoyuan_eddy@hotmail.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/OS3P286MB229570CCED618B20355D227AF5D59@OS3P286MB2295.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The forward declaration was introduced with a prototype that does
not match the function definition:
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:2166:13: error: conflicting types for 'xgbe_phy_perform_ratechange' due to enum/integer mismatch; have 'void(struct xgbe_prv_data *, enum xgbe_mb_cmd, enum xgbe_mb_subcmd)' [-Werror=enum-int-mismatch]
2166 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c:391:13: note: previous declaration of 'xgbe_phy_perform_ratechange' with type 'void(struct xgbe_prv_data *, unsigned int, unsigned int)'
391 | static void xgbe_phy_perform_ratechange(struct xgbe_prv_data *pdata,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Ideally there should not be any forward declarations here, which
would make it easier to show that there is no unbounded recursion.
I tried fixing this but could not figure out how to avoid the
recursive call.
As a hotfix, address only the broken prototype to fix the build
problem instead.
Fixes: 4f3b20bfbb ("amd-xgbe: add support for rx-adaptation")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230203121553.2871598-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are no external users of the vsc7514_*_regmap[] symbols or
vsc7514_vcap_* functions. They were exported in commit 32ecd22ba6 ("net:
mscc: ocelot: split register definitions to a separate file") with the
intention of being used, but the actual structure used in commit
2efaca411c ("net: mscc: ocelot: expose vsc7514_regmap definition") ended
up being all that was needed.
Bury these unnecessary symbols.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230204182056.25502-1-colin.foster@in-advantage.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ajit Khaparde says:
====================
bnxt: Add Auxiliary driver support
Add auxiliary device driver for Broadcom devices.
The bnxt_en driver will register and initialize an aux device
if RDMA is enabled in the underlying device.
The bnxt_re driver will then probe and initialize the
RoCE interfaces with the infiniband stack.
We got rid of the bnxt_en_ops which the bnxt_re driver used to
communicate with bnxt_en.
Similarly We have tried to clean up most of the bnxt_ulp_ops.
In most of the cases we used the functions and entry points provided
by the auxiliary bus driver framework.
And now these are the minimal functions needed to support the functionality.
We will try to work on getting rid of the remaining if we find any
other viable option in future.
* 'aux-bus-v11' of https://github.com/ajitkhaparde1/linux:
bnxt_en: Remove runtime interrupt vector allocation
RDMA/bnxt_re: Remove the sriov config callback
bnxt_en: Remove struct bnxt access from RoCE driver
bnxt_en: Use auxiliary bus calls over proprietary calls
bnxt_en: Use direct API instead of indirection
bnxt_en: Remove usage of ulp_id
RDMA/bnxt_re: Use auxiliary driver interface
bnxt_en: Add auxiliary driver support
====================
Link: https://lore.kernel.org/r/20230202033809.3989-1-ajit.khaparde@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the network status is unstable, use-after-free may occur when
read data from the server.
BUG: KASAN: use-after-free in readpages_fill_pages+0x14c/0x7e0
Call Trace:
<TASK>
dump_stack_lvl+0x38/0x4c
print_report+0x16f/0x4a6
kasan_report+0xb7/0x130
readpages_fill_pages+0x14c/0x7e0
cifs_readv_receive+0x46d/0xa40
cifs_demultiplex_thread+0x121c/0x1490
kthread+0x16b/0x1a0
ret_from_fork+0x2c/0x50
</TASK>
Allocated by task 2535:
kasan_save_stack+0x22/0x50
kasan_set_track+0x25/0x30
__kasan_kmalloc+0x82/0x90
cifs_readdata_direct_alloc+0x2c/0x110
cifs_readdata_alloc+0x2d/0x60
cifs_readahead+0x393/0xfe0
read_pages+0x12f/0x470
page_cache_ra_unbounded+0x1b1/0x240
filemap_get_pages+0x1c8/0x9a0
filemap_read+0x1c0/0x540
cifs_strict_readv+0x21b/0x240
vfs_read+0x395/0x4b0
ksys_read+0xb8/0x150
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Freed by task 79:
kasan_save_stack+0x22/0x50
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2e/0x50
__kasan_slab_free+0x10e/0x1a0
__kmem_cache_free+0x7a/0x1a0
cifs_readdata_release+0x49/0x60
process_one_work+0x46c/0x760
worker_thread+0x2a4/0x6f0
kthread+0x16b/0x1a0
ret_from_fork+0x2c/0x50
Last potentially related work creation:
kasan_save_stack+0x22/0x50
__kasan_record_aux_stack+0x95/0xb0
insert_work+0x2b/0x130
__queue_work+0x1fe/0x660
queue_work_on+0x4b/0x60
smb2_readv_callback+0x396/0x800
cifs_abort_connection+0x474/0x6a0
cifs_reconnect+0x5cb/0xa50
cifs_readv_from_socket.cold+0x22/0x6c
cifs_read_page_from_socket+0xc1/0x100
readpages_fill_pages.cold+0x2f/0x46
cifs_readv_receive+0x46d/0xa40
cifs_demultiplex_thread+0x121c/0x1490
kthread+0x16b/0x1a0
ret_from_fork+0x2c/0x50
The following function calls will cause UAF of the rdata pointer.
readpages_fill_pages
cifs_read_page_from_socket
cifs_readv_from_socket
cifs_reconnect
__cifs_reconnect
cifs_abort_connection
mid->callback() --> smb2_readv_callback
queue_work(&rdata->work) # if the worker completes first,
# the rdata is freed
cifs_readv_complete
kref_put
cifs_readdata_release
kfree(rdata)
return rdata->... # UAF in readpages_fill_pages()
Similarly, this problem also occurs in the uncache_fill_pages().
Fix this by adjusts the order of condition judgment in the return
statement.
Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Like we did it for GuC, introduce some helper print macros for
HuC to have unified format of messages that also include GT#.
While around improve some messages and use %pe if possible.
v2: update GSC/PXP timeout message
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230203085912.1963-1-michal.wajdeczko@intel.com
Values of base settings for nested proc-based VM-Execution control MSR come
from the ones for non-nested. And for SECONDARY_EXEC_ENABLE_VMFUNC flag,
KVM currently a) first mask off it from vmcs_conf->cpu_based_2nd_exec_ctrl;
b) then check it against the same source; c) and reset it again if host has
it.
So just simplify this, by not masking off SECONDARY_EXEC_ENABLE_VMFUNC in
the first place.
No functional change.
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Link: https://lore.kernel.org/r/20221109075413.1405803-3-yu.c.zhang@linux.intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Explicitly disable VMFUNC in vmcs01 to document that KVM doesn't support
any VM-Functions for L1. WARN in the dedicated VMFUNC handler if an exit
occurs while L1 is active, but keep the existing handlers as fallbacks to
avoid killing the VM as an unexpected VMFUNC VM-Exit isn't fatal
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Link: https://lore.kernel.org/r/20221109075413.1405803-2-yu.c.zhang@linux.intel.com
[sean: don't kill the VM on an unexpected VMFUNC from L1, reword changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Not all decoders have a reset callback.
The CXL specification allows a host bridge with a single root port to
have no explicit HDM decoders. Currently the region driver assumes there
are none. As such the CXL core creates a special pass through decoder
instance without a commit/reset callback.
Prior to this patch, the ->reset() callback was called unconditionally when
calling cxl_region_decode_reset. Thus a configuration with 1 Host Bridge,
1 Root Port, and one directly attached CXL type 3 device or multiple CXL
type 3 devices attached to downstream ports of a switch can cause a null
pointer dereference.
Before the fix, a kernel crash was observed when we destroy the region, and
a pass through decoder is reset.
The issue can be reproduced as below,
1) create a region with a CXL setup which includes a HB with a
single root port under which a memdev is attached directly.
2) destroy the region with cxl destroy-region regionX -f.
Fixes: 176baefb2e ("cxl/hdm: Commit decoder state to hardware")
Cc: <stable@vger.kernel.org>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Link: https://lore.kernel.org/r/20221215170909.2650271-1-fan.ni@samsung.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Commit 15b9ca1641 ("drm: Config orientation property if panel provides
it") added a helper to set the panel orientation early but only
connected this for drm_bridge_connector, which constructs a panel bridge
with DRM_BRIDGE_ATTACH_NO_CONNECTOR and creates the connector itself.
When the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is not specified and the
panel_bridge creates its own connector the orientation is not set unless
the panel does it in .get_modes which is too late and leads to a warning
splat from __drm_mode_object_add() because the device is already
registered.
Call the necessary function to set add the orientation property when the
connector is created so that it is available before the device is
registered.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120114313.2087015-1-john@metanate.com
Unconditionally enabling TSC watchdog checking of the HPET and PMTMR
clocksources can degrade latency and performance. Therefore, provide
a new "watchdog" option to the tsc= boot parameter that opts into such
checking. Note that tsc=watchdog is overridden by a tsc=nowatchdog
regardless of their relative positions in the list of boot parameters.
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
pi->dev.id is unsigned so error checking of ida_alloc return value does
not work. Fix it.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The RFI and STF security mitigation options can flip the
interrupt_exit_not_reentrant static branch condition concurrently with
the interrupt exit code which tests that branch.
Interrupt exit tests this condition to set MSR[EE|RI] for exit, then
again in the case a soft-masked interrupt is found pending, to recover
the MSR so the interrupt can be replayed before attempting to exit
again. If the condition changes between these two tests, the MSR and irq
soft-mask state will become corrupted, leading to warnings and possible
crashes. For example, if the branch is initially true then false,
MSR[EE] will be 0 but PACA_IRQ_HARD_DIS clear and EE may not get
enabled, leading to warnings in irq_64.c.
Fixes: 13799748b9 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20230206042240.92103-1-npiggin@gmail.com
When ice_add_special_words() fails, the 'rm' is not released, which will
lead to a memory leak. Fix this up by going to 'err_unroll' label.
Compile tested only.
Fixes: 8b032a55c1 ("ice: low level support for tunnels")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
The > comparison should be >= to prevent reading one element beyond
the end of the array.
The "vsi->num_rxq" is not strictly speaking the number of elements in
the vsi->rxq_map[] array. The array has "vsi->alloc_rxq" elements and
"vsi->num_rxq" is less than or equal to the number of elements in the
array. The array is allocated in ice_vsi_alloc_arrays(). It's still
an off by one but it might not access outside the end of the array.
Fixes: 143b86f346 ("ice: Enable RX queue selection using skbedit action")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Amritha Nambiar <amritha.nambiar@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
If the user turns on the vf-true-promiscuous-support flag, then Rx VLAN
filtering will be disabled if the VF requests to enable promiscuous
mode. When the VF is in a port VLAN, this is the incorrect behavior
because it will allow the VF to receive traffic outside of its port VLAN
domain. Fortunately this only resulted in the VF(s) receiving broadcast
traffic outside of the VLAN domain because all of the VLAN promiscuous
rules are based on the port VLAN ID. Fix this by setting the
.disable_rx_filtering VLAN op to a no-op when a port VLAN is enabled on
the VF.
Also, make sure to make this fix for both Single VLAN Mode and Double
VLAN Mode enabled devices.
Fixes: c31af68a1b ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This driver removed the console, but hasn't yet decided if it could
take over the console yet. Instead of doing that, probe the hw for
support and then remove the console afterwards.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216859
Fixes: 145eed48de ("fbdev: Remove conflicting devices on PCI bus")
Reported-by: Zeno Davatz <zdavatz@gmail.com>
Tested-by: Zeno Davatz <zdavatz@gmail.com>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230205210751.3842103-1-airlied@gmail.com
In a previous commit, Ubuntu kernel code version is correctly set
by retrieving the information from /proc/version_signature.
commit<5b3d72987701d51bf31823b39db49d10970f5c2d>
(libbpf: Improve LINUX_VERSION_CODE detection)
The /proc/version_signature file doesn't present in at least the
older versions of Debian distributions (eg, Debian 9, 10). The Debian
kernel has a similar issue where the release information from uname()
syscall doesn't give the kernel code version that matches what the
kernel actually expects. Below is an example content from Debian 10.
release: 4.19.0-23-amd64
version: #1 SMP Debian 4.19.269-1 (2022-12-20) x86_64
Debian reports incorrect kernel version in utsname::release returned
by uname() syscall, which in older kernels (Debian 9, 10) leads to
kprobe BPF programs failing to load due to the version check mismatch.
Fortunately, the correct kernel code version presents in the
utsname::version returned by uname() syscall in Debian kernels. This
change adds another get kernel version function to handle Debian in
addition to the previously added get kernel version function to handle
Ubuntu. Some minor refactoring work is also done to make the code more
readable.
Signed-off-by: Hao Xiang <hao.xiang@bytedance.com>
Signed-off-by: Ho-Ren (Jack) Chuang <horenchuang@bytedance.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230203234842.2933903-1-hao.xiang@bytedance.com
When logging a directory, we always set the inode's last_dir_index_offset
to the offset of the last dir index item we found. This is using an extra
field in the log context structure, and it makes more sense to update it
only after we insert dir index items, and we could directly update the
inode's last_dir_index_offset field instead.
So make this simpler by updating the inode's last_dir_index_offset only
when we actually insert dir index keys in the log tree, and getting rid
of the last_dir_item_offset field in the log context structure.
Reported-by: David Arendt <admin@prnet.org>
Link: https://lore.kernel.org/linux-btrfs/ae169fc6-f504-28f0-a098-6fa6a4dfb612@leemhuis.info/
Reported-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/Y8voyTXdnPDz8xwY@mail.gmail.com/
Reported-by: Hunter Wardlaw <wardlawhunter@gmail.com>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1207231
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216851
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During v6.2 cycle, there were a series of changes to task cpu affinity
handling which fixed cpuset inadvertently clobbering user-configured
affinity masks. Unfortunately, they broke the affinity handling on hybrid
heterogeneous CPUs which have cores that can execute both 64 and 32bit along
with cores that can only execute 32bit code.
This late pull request contains two fix patches for the above issue. While
reverting the changes that caused the regression is definitely an option,
the origial patches do improve how cpuset behave signficantly in some cases
and the fixes seem fairly safe, so I think it'd be better to try to fix them
first.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCY+F1Fg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGXK8AP0SuFGMgUQL1gYVGfFG3gMCcxDKHVhdU+UP/N1l
oJXEpgEA8DW1otuQZz0+MHUyYHkEIUQ5eVj1f2BJfHRkc5r5Cgo=
=MXxv
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.2-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"During the v6.2 cycle, there were a series of changes to task cpu
affinity handling which fixed cpuset inadvertently clobbering
user-configured affinity masks. Unfortunately, they broke the affinity
handling on hybrid heterogeneous CPUs which have cores that can
execute both 64 and 32bit along with cores that can only execute 32bit
code.
This contains two fix patches for the above issue. While reverting the
changes that caused the regression is definitely an option, the
origial patches do improve how cpuset behave signficantly in some
cases and the fixes seem fairly safe, so I think it'd be better to try
to fix them first"
* tag 'cgroup-for-6.2-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: Call set_cpus_allowed_ptr() with appropriate mask for task
cgroup/cpuset: Don't filter offline CPUs in cpuset_cpus_allowed() for top cpuset tasks
-----BEGIN PGP SIGNATURE-----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=5fdr
-----END PGP SIGNATURE-----
Merge tag 'for-6.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- explicitly initialize zlib work memory to fix a KCSAN warning
- limit number of send clones by maximum memory allocated
- limit device size extent in case it device shrink races with chunk
allocation
- raid56 fixes:
- fix copy&paste error in RAID6 stripe recovery
- make error bitmap update atomic
* tag 'for-6.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: raid56: make error_bitmap update atomic
btrfs: send: limit number of clones and allocated memory size
btrfs: zlib: zero-initialize zlib workspace
btrfs: limit device extents to the device size
btrfs: raid56: fix stripes if vertical errors are found
Merge series from Daniel Beer <daniel.beer@igorinstitute.com>:
This pair of patches fixes two issues which crept in while revising the
original submission, at a time when I no longer had access to test
hardware.
The fixes here have been tested and verified on hardware.
Add the ADSP GPR (Generic Packet Router) and LPASS LPI (Low Power Audio
SubSystem Low Power Island) pin controller nodes used as part of audio
subsystem on SM8550.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
[bjorn: Shortened stream mask, per Konrad's request]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206150744.513967-1-krzysztof.kozlowski@linaro.org
Add support for new field coming with socinfo structure under v17 to get
hardware platform's oem variant id. This is to enable OEMs to have minor
changes in the board, but to use the same platform subtype as the one
supported by Qualcomm. The new field is to be used in platform overlay
file. Default value is 0, reserved for Qualcomm platforms. Also, add
debugfs support to read this field for a device.
Signed-off-by: Naman Jain <quic_namajain@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230127041200.29094-1-quic_namajain@quicinc.com
Adding compatible string to support RPM communication over SMD for
IPQ9574 SoC
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230113150310.29709-2-quic_devipriy@quicinc.com
gcc with W=1 reports
drivers/soc/qcom/pmic_glink_altmode.c:223:13: error: variable ‘svid’ set but not used [-Werror=unused-but-set-variable]
223 | u16 svid;
From reviewing the code, the setting of alt_port->svid does the same calculation.
Both are not needed. For debuggablity, keep the setting of local svid.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206135831.1794583-1-trix@redhat.com
set_cpus_allowed_ptr() will fail with -EINVAL if the requested
affinity mask is not a subset of the task_cpu_possible_mask() for the
task being updated. Consequently, on a heterogeneous system with cpusets
spanning the different CPU types, updates to the cgroup hierarchy can
silently fail to update task affinities when the effective affinity
mask for the cpuset is expanded.
For example, consider an arm64 system with 4 CPUs, where CPUs 2-3 are
the only cores capable of executing 32-bit tasks. Attaching a 32-bit
task to a cpuset containing CPUs 0-2 will correctly affine the task to
CPU 2. Extending the cpuset to CPUs 0-3, however, will fail to extend
the affinity mask of the 32-bit task because update_tasks_cpumask() will
pass the full 0-3 mask to set_cpus_allowed_ptr().
Extend update_tasks_cpumask() to take a temporary 'cpumask' paramater
and use it to mask the 'effective_cpus' mask with the possible mask for
each task being updated.
Fixes: 431c69fac0 ("cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()")
Signed-off-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Since commit 8f9ea86fdf ("sched: Always preserve the user
requested cpumask"), relax_compatible_cpus_allowed_ptr() is calling
__sched_setaffinity() unconditionally. This helps to expose a bug in
the current cpuset hotplug code where the cpumasks of the tasks in
the top cpuset are not updated at all when some CPUs become online or
offline. It is likely caused by the fact that some of the tasks in the
top cpuset, like percpu kthreads, cannot have their cpu affinity changed.
One way to reproduce this as suggested by Peter is:
- boot machine
- offline all CPUs except one
- taskset -p ffffffff $$
- online all CPUs
Fix this by allowing cpuset_cpus_allowed() to return a wider mask that
includes offline CPUs for those tasks that are in the top cpuset. For
tasks not in the top cpuset, the old rule applies and only online CPUs
will be returned in the mask since hotplug events will update their
cpumasks accordingly.
Fixes: 8f9ea86fdf ("sched: Always preserve the user requested cpumask")
Reported-by: Will Deacon <will@kernel.org>
Originally-from: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Will Deacon <will@kernel.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This driver relies on SMEM to populate items for each subsystem before
the device probes. The items in SMEM that are being looked for are
populated by the subsystems lazily, and therefore may not exist until
the device has booted. For example, if I build this driver into the
kernel on Trogdor Lazor and boot up, I don't see a 'modem' debugfs file
populated, because the modem boots and populates the SMEM item after
this driver probes.
Always populate the files for the subsystems if they're in SMEM, and
make the qcom_subsystem_sleep_stats_show() function return 0 if the SMEM
items still isn't there. This way we can run a simple command like
grep ^ /sys/kernel/debug/qcom_stats/*
and collect the subsystem sleep stats without interspersed errors or
missing details entirely because this driver probed first.
Fixes: 1d77246903 ("soc: qcom: Add Sleep stats driver")
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230119032329.2909383-1-swboyd@chromium.org
QMI is a network protocol, so anything using requires CONFIG_NET
to be enabled as well:
WARNING: unmet direct dependencies detected for QCOM_QMI_HELPERS
Depends on [n]: NET [=n]
Selected by [m]:
- QCOM_PDR_HELPERS [=m]
arm-linux-gnueabi-ld: drivers/soc/qcom/qmi_interface.o: in function `qmi_send_new_lookup':
qmi_interface.c:(.text+0xf0): undefined reference to `kernel_sendmsg'
Add the dependency to both QCOM_PDR_HELPERS and QCOM_PMIC_GLINK to make
it clearly what the dependency is when another PDR user is added.
pmic_glink also needs CONFIG_OF:
drivers/soc/qcom/pmic_glink_altmode.c: In function 'pmic_glink_altmode_probe':
drivers/soc/qcom/pmic_glink_altmode.c:418:33: error: 'struct drm_bridge' has no member named 'of_node'
Fixes: 58ef4ece1e ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206193804.191343-1-arnd@kernel.org
The page_fault_test KVM selftest requires userfaultfd but the config
fragment for the KVM selftests does not enable it, meaning that those tests
are skipped in CI systems that rely on appropriate settings in the config
fragments except on S/390 which happens to have it in defconfig. Enable
the option in the config fragment so that the tests get run.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20230202-kvm-selftest-userfaultfd-v1-1-8186ac5a33a5@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The documentation table added in a36afe7804 ("usb: gadget: uvc: Add
new enable_interrupt_ep attribute") was incorrect, resulting in a new
warning when compiling the documentation.
Correct the formatting to resolve the warning.
Fixes: a36afe7804 ("usb: gadget: uvc: Add new enable_interrupt_ep attribute")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230206151131.863960-1-dan.scally@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The stm32 nvmem driver fails to link as built-in when OPTEE
is a loadable module:
aarch64-linux-ld: drivers/nvmem/stm32-bsec-optee-ta.o: in function `stm32_bsec:
stm32-bsec-optee-ta.c:(.text+0xc8): undefined reference to `tee_client_open_session'
aarch64-linux-ld: drivers/nvmem/stm32-bsec-optee-ta.o: in function `stm32_bsec:
stm32-bsec-optee-ta.c:(.text+0x1fc): undefined reference to `tee_client_open_context'
Change the CONFIG_NVMEM_STM32_ROMEM definition so it can only
be built-in if OPTEE is either built-in or disabled, and
make NVMEM_STM32_BSEC_OPTEE_TA a hidden symbol instead.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-23-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document IPQ8074 compatible for QFPROM, its compatible with the generic
QFPROM fallback.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-22-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are currently no in-tree users of the Qualcomm SDAM nvmem driver
and there is generally no point in registering a driver that can be
built as a module at subsys init time.
Register the driver at the normal device init time instead and let
driver core sort out the probe order.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-21-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On STM32MP15x SoC, the SMC backend is optional when OP-TEE is used;
the PTA BSEC should be used as it is done on STM32MP13x platform,
but the BSEC SMC can be also used: it is a legacy mode in OP-TEE,
not recommended but used in previous OP-TEE firmware.
The presence of OP-TEE is dynamically detected in STM32MP15x device tree
and the supported NVMEM backend is dynamically detected:
- PTA with stm32_bsec_pta_find
- SMC with stm32_bsec_check
With OP-TEE but without PTA and SMC detection, the probe is deferred for
STM32MP15x devices.
On STM32MP13x platform, only the PTA is supported with cfg->ta = true
and this detection is skipped.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-19-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For boot with OP-TEE on STM32MP13, the communication with the secure
world no more use STMicroelectronics SMC but communication with the
STM32MP BSEC TA, for data access (read/write) or lock operation:
- all the request are sent to OP-TEE trusted application,
- for upper OTP with ECC protection and with word programming only
each OTP are permanently locked when programmed to avoid ECC error
on the second write operation
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-18-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert nvmem_add_cells_from_of() to use the new nvmem_add_one_cell().
This will remove duplicate code and it will make it possible to add a
hook to a nvmem layout in between, which can change fields before the
cell is finally added.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230206134356.839737-17-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
