The vcpu and vm mem_op ioctl implementations share some functionality.
Move argument checking into a function and call it from both
implementations. This allows code reuse in case of additional future
mem_op operations.
Suggested-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230206164602.138068-9-scgl@linux.ibm.com
Message-Id: <20230206164602.138068-9-scgl@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
The address is a 64 bit value, specifying a 32 bit value can crash the
guest. In this case things worked out with -O2 but not -O0.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Fixes: 1bb873495a ("KVM: s390: selftests: Add more copy memop tests")
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20230206164602.138068-8-scgl@linux.ibm.com
Message-Id: <20230206164602.138068-8-scgl@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
The guest code sets the key for mem1 only. In order to provoke a
protection exception the test codes needs to address mem1.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20230206164602.138068-7-scgl@linux.ibm.com
Message-Id: <20230206164602.138068-7-scgl@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
"acceeded" isn't a word, should be "exceeded".
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Link: https://lore.kernel.org/r/20230206164602.138068-6-scgl@linux.ibm.com
Message-Id: <20230206164602.138068-6-scgl@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Add a test that tries a real write to a bad address.
The existing CHECK_ONLY test doesn't cover all paths.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230206164602.138068-5-scgl@linux.ibm.com
Message-Id: <20230206164602.138068-5-scgl@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
This allows checking if the necessary requirements for a test case are
met via an arbitrary expression. In particular, it is easy to check if
certain bits are set in the memop extension capability.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230206164602.138068-4-scgl@linux.ibm.com
Message-Id: <20230206164602.138068-4-scgl@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Replace the DEFAULT_* test helpers by functions, as they don't
need the extra flexibility.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230206164602.138068-3-scgl@linux.ibm.com
Message-Id: <20230206164602.138068-3-scgl@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
The struct is quite large, so this seems nicer.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20230206164602.138068-2-scgl@linux.ibm.com
Message-Id: <20230206164602.138068-2-scgl@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
The guest used in s390 kvm selftests is not be set up to handle all
instructions the compiler might emit, i.e. vector instructions, leading
to crashes.
Limit what the compiler emits to the oldest machine model currently
supported by Linux.
Signed-off-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://lore.kernel.org/r/20230127174552.3370169-1-nsg@linux.ibm.com
Message-Id: <20230127174552.3370169-1-nsg@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Migration mode is a VM attribute which enables tracking of changes in
storage attributes (PGSTE). It assumes dirty tracking is enabled on all
memslots to keep a dirty bitmap of pages with changed storage attributes.
When enabling migration mode, we currently check that dirty tracking is
enabled for all memslots. However, userspace can disable dirty tracking
without disabling migration mode.
Since migration mode is pointless with dirty tracking disabled, disable
migration mode whenever userspace disables dirty tracking on any slot.
Also update the documentation to clarify that dirty tracking must be
enabled when enabling migration mode, which is already enforced by the
code in kvm_s390_vm_start_migration().
Also highlight in the documentation for KVM_S390_GET_CMMA_BITS that it
can now fail with -EINVAL when dirty tracking is disabled while
migration mode is on. Move all the error codes to a table so this stays
readable.
To disable migration mode, slots_lock should be held, which is taken
in kvm_set_memory_region() and thus held in
kvm_arch_prepare_memory_region().
Restructure the prepare code a bit so all the sanity checking is done
before disabling migration mode. This ensures migration mode isn't
disabled when some sanity check fails.
Cc: stable@vger.kernel.org
Fixes: 190df4a212 ("KVM: s390: CMMA tracking, ESSA emulation, migration mode")
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20230127140532.230651-2-nrb@linux.ibm.com
Message-Id: <20230127140532.230651-2-nrb@linux.ibm.com>
[frankja@linux.ibm.com: fixed commit message typo, moved api.rst error table upwards]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
A few more fixes for v6.2, all driver specific and small. It's larger
than is ideal but we can't really control when people find problems.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmPifS4ACgkQJNaLcl1U
h9AG5wf9EKiquRiuxSxtLrZdPO2xRBgcfZBbTqPeRvYGWeCzYaKFwcjI5UlJZ3Kz
tdymQ9tihVkcdrEH6xin3QETUI+8vU9++Vh1XVNN01GaSrMq9SupYFR5UvN5QNuD
SfjtDt7oWWzlFwOouDnLC5T/5U5iWqFVd/hHvZWHsCFJYIPzBvNTnXhQ8My/88Lf
2Fmn1/3HTDzNhTTrPdVK84ZIMVb7IbfMcFw4E9+Yk9jtGtfQXtK0l6VzJCwgS6Kl
85CZ51pPKCx4X18iDqyc0j5dcqAjI08FAa0i9Rfix3Sz0GXRsW7CemnFQSOR7Zw4
QQiBIMAIFEp4UzeBG9K79IPh/B9biA==
=hxoQ
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.2-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.2
A few more fixes for v6.2, all driver specific and small. It's larger
than is ideal but we can't really control when people find problems.
A PCI bridge may reside on a bus with other devices as well. The resource
distribution code does not take this into account and therefore it expands
the bridge resource windows too much, not leaving space for the other
devices (or functions of a multifunction device). This leads to an issue
that Jonathan reported when running QEMU with the following topology (QEMU
parameters):
-device pcie-root-port,port=0,id=root_port13,chassis=0,slot=2 \
-device x3130-upstream,id=sw1,bus=root_port13,multifunction=on \
-device e1000,bus=root_port13,addr=0.1 \
-device xio3130-downstream,id=fun1,bus=sw1,chassis=0,slot=3 \
-device e1000,bus=fun1
The first e1000 NIC here is another function in the switch upstream port.
This leads to following errors:
pci 0000:00:04.0: bridge window [mem 0x10200000-0x103fffff] to [bus 02-04]
pci 0000:02:00.0: bridge window [mem 0x10200000-0x103fffff] to [bus 03-04]
pci 0000:02:00.1: BAR 0: failed to assign [mem size 0x00020000]
e1000 0000:02:00.1: can't ioremap BAR 0: [??? 0x00000000 flags 0x0]
Fix this by taking into account bridge windows, device BARs and SR-IOV PF
BARs on the bus (PF BARs include space for VF BARS so only account PF
BARs), including the ones belonging to bridges themselves if it has any.
Link: https://lore.kernel.org/linux-pci/20221014124553.0000696f@huawei.com/
Link: https://lore.kernel.org/linux-pci/6053736d-1923-41e7-def9-7585ce1772d9@ixsystems.com/
Link: https://lore.kernel.org/r/20230131092405.29121-3-mika.westerberg@linux.intel.com
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reported-by: Alexander Motin <mav@ixsystems.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
KVM enables 'Enlightened VMCS' and 'Enlightened MSR Bitmap' when running as
a nested hypervisor on top of Hyper-V. When MSR bitmap is updated,
evmcs_touch_msr_bitmap function uses current_vmcs per-cpu variable to mark
that the msr bitmap was changed.
vmx_vcpu_create() modifies the msr bitmap via vmx_disable_intercept_for_msr
-> vmx_msr_bitmap_l01_changed which in the end calls this function. The
function checks for current_vmcs if it is null but the check is
insufficient because current_vmcs is not initialized. Because of this, the
code might incorrectly write to the structure pointed by current_vmcs value
left by another task. Preemption is not disabled, the current task can be
preempted and moved to another CPU while current_vmcs is accessed multiple
times from evmcs_touch_msr_bitmap() which leads to crash.
The manipulation of MSR bitmaps by callers happens only for vmcs01 so the
solution is to use vmx->vmcs01.vmcs instead of current_vmcs.
BUG: kernel NULL pointer dereference, address: 0000000000000338
PGD 4e1775067 P4D 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
...
RIP: 0010:vmx_msr_bitmap_l01_changed+0x39/0x50 [kvm_intel]
...
Call Trace:
vmx_disable_intercept_for_msr+0x36/0x260 [kvm_intel]
vmx_vcpu_create+0xe6/0x540 [kvm_intel]
kvm_arch_vcpu_create+0x1d1/0x2e0 [kvm]
kvm_vm_ioctl_create_vcpu+0x178/0x430 [kvm]
kvm_vm_ioctl+0x53f/0x790 [kvm]
__x64_sys_ioctl+0x8a/0xc0
do_syscall_64+0x5c/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: ceef7d10df ("KVM: x86: VMX: hyper-v: Enlightened MSR-Bitmap support")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Link: https://lore.kernel.org/r/20230123221208.4964-1-alexandru.matei@uipath.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
After division the extra resource space per hotplug bridge may not be
aligned according to the window alignment, so align it before passing it
down for further distribution.
Link: https://lore.kernel.org/r/20230131092405.29121-2-mika.westerberg@linux.intel.com
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
MDS expects the completed cap release prior to responding to the
session flush for cache drop.
Cc: stable@vger.kernel.org
Link: http://tracker.ceph.com/issues/38009
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
With the fix that made poll() and select() block if read would block
caused a slight regression in rasdaemon, as it needed that kind
of behavior. Add a way to make that behavior come back by writing
zero into the "buffer_percentage", which means to never block on read.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY+Jn3xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgQ6AQC30hHcPMPm8+drlH/P6wEYstRP6xbp
nHYHcvT6qXNPtAD+OhUQR2Zav66m6cE0qvkdnZb72E0YHRTfBhN5OpshTgQ=
=dJEF
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
"Fix regression in poll() and select()
With the fix that made poll() and select() block if read would block
caused a slight regression in rasdaemon, as it needed that kind of
behavior. Add a way to make that behavior come back by writing zero
into the 'buffer_percentage', which means to never block on read"
* tag 'trace-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix poll() and select() do not work on per_cpu trace_pipe and trace_pipe_raw
We've moved the upstream Linux Kernel audit subsystem discussions to
a new mailing list, this patch updates the MAINTAINERS info with the
new list address.
Marking this for stable inclusion to help speed uptake of the new
list across all of the supported kernel releases. This is a doc only
patch so the risk should be close to nil.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <paul@paul-moore.com>
SBI PMU extension defines a set of firmware events which can provide
useful information to guests about the number of SBI calls. As
hypervisor implements the SBI PMU extension, these firmware events
correspond to ecall invocations between VS->HS mode. All other firmware
events will always report zero if monitored as KVM doesn't implement them.
This patch adds all the infrastructure required to support firmware
events.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
RISC-V SBI PMU & Sscofpmf ISA extension allows supporting perf in
the virtualization enviornment as well. KVM implementation
relies on SBI PMU extension for the most part while trapping
& emulating the CSRs read for counter access.
This patch doesn't have the event sampling support yet.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
As the KVM guests only see the virtual PMU counters, all hpmcounter
access should trap and KVM emulates the read access on behalf of guests.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Any guest must not get access to any hpmcounter including cycle/instret
without any checks. We achieve that by disabling all the bits except TM
bit in hcounteren.
However, instret and cycle access for guest user space can be enabled
upon explicit request (via ONE REG) or on first trap from VU mode
to maintain ABI requirement in the future. This patch doesn't support
that as ONE REG interface is not settled yet.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The privilege mode filtering feature must be available in the host so
that the host can inhibit the counters while the execution is in HS mode.
Otherwise, the guests may have access to critical guest information.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
SBI PMU extension allows KVM guests to configure/start/stop/query
about the PMU counters in virtualized enviornment as well.
In order to allow that, KVM implements the entire SBI PMU extension.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
This patch only adds barebone structure of perf implementation. Most
of the function returns zero at this point and will be implemented
fully in the future.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, the SBI extension handle is expected to return Linux error code.
The top SBI layer converts the Linux error code to SBI specific error code
that can be returned to guest invoking the SBI calls. This model works
as long as SBI error codes have 1-to-1 mappings between them.
However, that may not be true always. This patch attempts to disassociate
both these error codes by allowing the SBI extension implementation to
return SBI specific error codes as well.
The extension will continue to return the Linux error specific code which
will indicate any problem *with* the extension emulation while the
SBI specific error will indicate the problem *of* the emulation.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
According to the SBI specification, the stop function can only
return error code SBI_ERR_FAILED. However, currently it returns
-EINVAL which will be mapped SBI_ERR_INVALID_PARAM.
Return an linux error code that maps to SBI_ERR_FAILED i.e doesn't map
to any other SBI error code. While EACCES is not the best error code
to describe the situation, it is close enough and will be replaced
with SBI error codes directly anyways.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently the probe function just checks if an SBI extension is
registered or not. However, the extension may not want to advertise
itself depending on some other condition.
An additional extension specific probe function will allow
extensions to decide if they want to be advertised to the caller or
not. Any extension that does not require additional dependency checks
can avoid implementing this function.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
This patch fixes/improve few minor things in SBI PMU extension
definition.
1. Align all the firmware event names.
2. Add macros for bit positions in cache event ID & ops.
The changes were small enough to combine them together instead
of creating 1 liner patches.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, the host driver doesn't have any method to identify if the
requested perf event is from kvm or bare metal. As KVM runs in HS
mode, there are no separate hypervisor privilege mode to distinguish
between the attributes for guest/host.
Improve the privilege mode filtering by using the event specific
config1 field.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
KVM module needs to know how many hardware counters and the counter
width that the platform supports. Otherwise, it will not be able to show
optimal value of virtual counters to the guest. The virtual hardware
counters also need to have the same width as the logical hardware
counters for simplicity. However, there shouldn't be mapping between
virtual hardware counters and logical hardware counters. As we don't
support hetergeneous harts or counters with different width as of now,
the implementation relies on the counter width of the first available
programmable counter.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The M-mode redirects an unhandled illegal instruction trap back
to S-mode. However, KVM running in HS-mode terminates the VS-mode
software when it receives illegal instruction trap. Instead, KVM
should redirect the illegal instruction trap back to VS-mode, and
let VS-mode trap handler decide the next step. This futher allows
guest kernel to implement on-demand enabling of vector extension
for a guest user space process upon first-use.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
The kvm_riscv_vcpu_trap_redirect() should set guest privilege mode
to supervisor mode because guest traps/interrupts are always handled
in virtual supervisor mode.
Fixes: 9f70132651 ("RISC-V: KVM: Handle MMIO exits for VCPU")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
At the moment, riscv only supports PMD and PUD hugepages. For sv39,
PGDIR_SIZE == PUD_SIZE but not for sv48 and sv57. So fix this by changing
PGDIR_SIZE into PUD_SIZE.
Fixes: 9d05c1fee8 ("RISC-V: KVM: Implement stage2 page table programming")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmPg+r4THG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6A44B/0c8jjyLikVE2fEBKkvPk8iRlFKap48
140HNR+1TuVBBPCJTe2Gq3l8fDfFUgUVnFfVDjAQq6pMWufLkz9jVr5uGN7O94v+
tFCjip8NLRTa6ibgQlGrFXl31X5vqT+jV6V4l29wFgbwgOMRrod7wLDo+bHTtuuY
46Sf4GgIazYjxEeZBBsvjnAbraFq0twZFcEz9SyeOxqjR+9+71X4Y3x0kgQuz72N
CrvRng0yFLqbHOBE60iaDqbjuNnwBGTH476pwX25Kj9gVyIH20T45h8tV4j6z2Sq
A42cHKDlWZRWUiWQjGOHHT4igUf//Sfv8WDaFjqobO/DDY+nBA75EPAv
=hWLT
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.3-20230206' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-02-06
this is a pull request of 47 patches for net-next/master.
The first two patch is by Oliver Hartkopp. One adds missing error
checking to the CAN_GW protocol, the other adds a missing CAN address
family check to the CAN ISO TP protocol.
Thomas Kopp contributes a performance optimization to the mcp251xfd
driver.
The next 11 patches are by Geert Uytterhoeven and add support for
R-Car V4H systems to the rcar_canfd driver.
Stephane Grosjean and Lukas Magel contribute 8 patches to the peak_usb
driver, which add support for configurable CAN channel ID.
The last 17 patches are by me and target the CAN bit timing
configuration. The bit timing is cleaned up, error messages are
improved and forwarded to user space via NL_SET_ERR_MSG_FMT() instead
of netdev_err(), and the SJW handling is updated, including the
definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
* tag 'linux-can-next-for-6.3-20230206' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (47 commits)
can: bittiming: can_validate_bitrate(): report error via netlink
can: bittiming: can_calc_bittiming(): convert from netdev_err() to NL_SET_ERR_MSG_FMT()
can: bittiming: can_calc_bittiming(): clean up SJW handling
can: bittiming: can_sjw_set_default(): use Phase Seg2 / 2 as default for SJW
can: bittiming: can_sjw_check(): check that SJW is not longer than either Phase Buffer Segment
can: bittiming: can_sjw_check(): report error via netlink and harmonize error value
can: bittiming: can_fixup_bittiming(): report error via netlink and harmonize error value
can: bittiming: factor out can_sjw_set_default() and can_sjw_check()
can: bittiming: can_changelink() pass extack down callstack
can: netlink: can_changelink(): convert from netdev_err() to NL_SET_ERR_MSG_FMT()
can: netlink: can_validate(): validate sample point for CAN and CAN-FD
can: dev: register_candev(): bail out if both fixed bit rates and bit timing constants are provided
can: dev: register_candev(): ensure that bittiming const are valid
can: bittiming: can_get_bittiming(): use direct return and remove unneeded else
can: bittiming: can_fixup_bittiming(): set effective tq
can: bittiming: can_fixup_bittiming(): use CAN_SYNC_SEG instead of 1
can: bittiming(): replace open coded variants of can_bit_time()
can: peak_usb: Reorder include directives alphabetically
can: peak_usb: align CAN channel ID format in log with sysfs attribute
can: peak_usb: export PCAN CAN channel ID as sysfs device attribute
...
====================
Link: https://lore.kernel.org/r/20230206131620.2758724-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add bindings for the MT7981 pinctrl driver. As MT7981 has most features
in common with MT7986 (but has a different layout in terms on pinctrl
and clocks), the existing mediatek,mt7986-pinctrl.yaml was used as an
example to create a similar document covering MT7981.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/3f0fd0becc338eef66caeb7244c3c432b8d1ef7a.1674693008.git.daniel@makrotopia.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Mark gpio sub nodes of pinctrl as deprecated.
Gpio nodes are now placed in the root of the device tree.
The relation to pinctrl is now described with the
"gpio-ranges" property.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/137b56f0-8e86-f705-4ba7-d5dfe3c0b477@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The IPQ5332 SoC comes with a TLMM block, like all other Qualcomm
platforms, so add a driver for it.
Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206071217.29313-3-quic_kathirav@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If ops->get_mm() returns a non-zero error code, we goto out_complete,
but there, we return 0. Fix that to propagate the "ret" variable to the
caller. If ops->get_mm() succeeds, it will always return 0.
Fixes: 2b30f8291a ("net: ethtool: add support for MAC Merge layer")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230206094932.446379-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- small improvements to the logging functionality (Amit Engel)
- authentication cleanups (Hannes Reinecke)
- cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- work around the command effects for Format NVM (Keith Busch)
- misc cleanups (Keith Busch, Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----
iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmPh7B8LHGhjaEBsc3Qu
ZGUACgkQD55TZVIEUYOIgxAAtLJaXzRFrKF6mK6j2PcXulJDVcayQYIiEBBTn4Li
DkUr7QBqzRf+Y6TlkycNlAKroUa/tUEAFZWLpRf2t4Vvx2wqCMJGfJGz5/cJa+cs
wM3T/9qijq+FG1t/ZA8L774vDUnwDHmU7WJgdva2xnXrzFGnh0GqgLyOS37G5Mqh
kU3iQgMo+089IHmvD10IZjFjaWifbxQbC4gKxno53JYxvn3Ktu57PxBI/jPKIsbT
yQj21LvCZwDIehpQqtCieLjjNrj1g130hYxplcLWB2D4BkC0rcqTCh+Jb7RtprzP
wHrZig1zAA7IzGXyouQymi56HJiCAdTOgynVrg4j/VmQIqE3+H/KKQ0n7xMGEqIM
YGO3CXuyS3DcX3SefuHroZapl95EbnF/EBHE1gGG49hPY2SoEGHlZwou3Hu/mWbm
lOSuLFCCwvahKC6SzGr7+Vk5LgrwzAhl2Nwf9i1B+q0mnBHxiOXCeGmrtMde63W0
qlpBhbwquoVbdia3oEvLfos7QZmw1eoyL4MWF6IG+rqxut+3A9eoyIAR61XLepny
0yr7Kn0hZGtiZPJXhTG43p9hoVUP+FoihlwyGpZ8O2/HQFXZOmWRBPBF+L3mL/u2
TPeiDEycWx3MtiGENts9UzaxEz9mo1pcky3vcsj8Ch4qYoYfFOmUd5F8Ay+nBETX
VbQ=
=yiTz
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.3-2023-02-07' of git://git.infradead.org/nvme into for-6.3/block
Pull NVMe updates from Christoph:
"nvme updates for Linux 6.3
- small improvements to the logging functionality (Amit Engel)
- authentication cleanups (Hannes Reinecke)
- cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- work around the command effects for Format NVM (Keith Busch)
- misc cleanups (Keith Busch, Christoph Hellwig)"
* tag 'nvme-6.3-2023-02-07' of git://git.infradead.org/nvme:
nvme: mask CSE effects for security receive
nvme: always initialize known command effects
nvmet: for nvme admin set_features cmd, call nvmet_check_data_len_lte()
nvme-tcp: add additional info for nvme_tcp_timeout log
nvme: add nvme_opcode_str function for all nvme cmd types
nvme: remove nvme_execute_passthru_rq
nvme-pci: place descriptor addresses in iod
nvme-pci: use mapped entries for sgl decision
nvme-pci: remove SGL segment descriptors
nvme-auth: don't use NVMe status codes
nvme-fabrics: clarify AUTHREQ result handling
queuedata is not referenced in ublk_drv and we can use driver_data
instead. Pass NULL to blk_mq_alloc_disk() as queuedata while allocating
ublk's gendisk.
Signed-off-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207070839.370817-4-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
WRITE_ZEROES won't return bytes returned just like FLUSH and DISCARD,
and we can end it directly. Add missing comment for it in
ublk_complete_rq().
Signed-off-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207070839.370817-3-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_has_data() allows a NULL bio so the NULL check in
ublk_rq_has_data() is unnecessary.
Signed-off-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207070839.370817-2-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extract drm_kms_helper_enable_hpd() and drm_kms_helper_disable_hpd(),
two helpers that enable and disable HPD handling on all device's
connectors.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124104548.3234554-1-dmitry.baryshkov@linaro.org
(cherry picked from commit cbf143b282)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
When handling error path, ret needs to be set to correct value.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Fixes: d29d41e28e ("ASoC: topology: Add support for multiple kcontrol types to a widget")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230207210428.2076354-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ISO 11783-5 standard, in "4.5.2 - Address claim requirements", states:
d) No CF shall begin, or resume, transmission on the network until 250
ms after it has successfully claimed an address except when
responding to a request for address-claimed.
But "Figure 6" and "Figure 7" in "4.5.4.2 - Address-claim
prioritization" show that the CF begins the transmission after 250 ms
from the first AC (address-claimed) message even if it sends another AC
message during that time window to resolve the address contention with
another CF.
As stated in "4.4.2.3 - Address-claimed message":
In order to successfully claim an address, the CF sending an address
claimed message shall not receive a contending claim from another CF
for at least 250 ms.
As stated in "4.4.3.2 - NAME management (NM) message":
1) A commanding CF can
d) request that a CF with a specified NAME transmit the address-
claimed message with its current NAME.
2) A target CF shall
d) send an address-claimed message in response to a request for a
matching NAME
Taking the above arguments into account, the 250 ms wait is requested
only during network initialization.
Do not restart the timer on AC message if both the NAME and the address
match and so if the address has already been claimed (timer has expired)
or the AC message has been sent to resolve the contention with another
CF (timer is still running).
Signed-off-by: Devid Antonio Filoni <devid.filoni@egluetechnologies.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20221125170418.34575-1-devid.filoni@egluetechnologies.com
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Generally speaking, any memory allocations that can be associated with a
particular VM should be charged to the cgroup of its process.
Nonetheless, there are a couple spots in KVM/arm64 that aren't currently
accounted:
- the ccsidr array containing the virtualized cache hierarchy
- the cpumask of supported cpus, for use of the vPMU on heterogeneous
systems
Go ahead and set __GFP_ACCOUNT for these allocations.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20230206235229.4174711-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
